Category:C
This programming language may be used to instruct a computer to perform a task.
Execution method: | Compiled (machine code) |
---|---|
Garbage collected: | No |
Parameter passing methods: | By value |
Type safety: | Unsafe |
Type strength: | Weak |
Type compatibility: | Nominative |
Type expression: | Explicit |
Type checking: | Static |
Lang tag(s): | c |
See Also: |
C is a general-purpose, procedural, imperative computer programming language developed in 1972 by Dennis Ritchie at the Bell Telephone Laboratories for use with the UNIX operating system. C evolved from its predecessor, B.
C has since spread to many other platforms, and is now one of the most widely used programming languages. C has also greatly influenced many other popular languages, such as C++ and Objective-C, which were originally designed as enhancements to C. People are so familiar with its syntax that many other languages such as AWK, PHP, Java, JavaScript, D, and C# deliberately used its "look and feel". C is the most commonly used programming language for writing system software, though it is also widely used for writing applications. C is the lingua franca of the open source community.
Versions
- K&R C was the first widely-used form of C. It was originally documented in The C Programming Language, published in 1978. It is named for the authors, Brian Kernighan and Dennis Ritchie (also the language's creator). Code in this style is virtually nonexistent today.
- C89 (often called ANSI C) is the version of C standardized by ANSI in 1989. It is the most commonly used and supported version of the language.
- C90 (often called ISO C) is identical to C89, republished by ISO in 1990.
- C99 is a significant improvement, adopting many features of C++ and standardizing common compiler extensions. It was standardized by ISO in 1999, and by ANSI in 2000. It is primarily supported by commercial C compilers, but most of its features are available in Clang GCC. [1]
- C11 is the previous standard, published in December 2011. It is the default for GCC as of version 5.1.
- C18 is the current standard, published in June 2018. It is the default for GCC as of version 8.1.
- C2x is the upcoming standard, expected to be voted on in 2023 - it will then become C23. GCC 9, Clang 9 and Pelles C 11 have preliminary support for it.
Overview
Curly Braces
C uses curly braces as a separator for sections of code. All curly braces must be "balanced," i.e. every left curly brace must have a right curly brace after it. Nesting curly brace pairs inside curly braces is also acceptable as long as none of them are "lonely."
Most advanced code editors will help you with curly braces by automatically typing the right brace as soon as you type the left one. It is a matter of style as to whether you prefer to place an opening curly brace on its own line or at the end of the previous line. Here we use the latter style.
int main() {
// Your main program goes here.
// If you forgot either of these curly braces you would get an error message when you try to compile!
}
The contents of a function, if statement, etc. must be enclosed in curly braces for the code to count as part of that section.
{
// This wouldn't actually compile as none of these variables were declared in this scope. More on that later.
if (K == 3) {
X = Y; // This line will be skipped if K doesn't equal 3.
}
Y = Z; // This is not part of the if statement. It will execute even if K doesn't equal 3.
}
Semicolons
Any "executable" statement must end in a semicolon, such as an assignment or function call. If you get an error message from your compiler, it won't explicitly tell you "Expected semicolon at end of line X." Go to the line number it says the error is at, and look a few lines above that. You might have forgotten a semicolon there.
Scope
Unlike assembly which lets you jump anywhere or read any memory address, C imposes restrictions on labeled values. A variable defined inside a function can only be "seen" by that function, and not the ones outside it. Furthermore, you can re-use variable names inside a function and it refers to a different entity than the variable of the same name defined outside.
Functions
A function is made up of three parts: its return type, its name, and its arguments.
int main(void) // This is the function "main," which takes no arguments and returns a 32-bit signed integer value.
int sum(int a, int b) // This is the function "sum," which takes two integer arguments and returns an integer.
void PlaySound(char songName)
// This takes a character string as an argument and presumably sends a command to sound hardware.
// It returns no values. Functions that have a return value of "void" typically do some sort of
// procedure whose outcome does not need to be measured or remembered later.
Note that the variable names listed as arguments when declaring a function are known as formal parameters and only are there to define the function. Variables with those names need not be declared or defined in your actual function, nor do they refer to any variables in your program that happen to have the same name. Essentially, formal parameters act as placeholders for the actual function parameters that you'll be using.
int foo(int x) {
return x;
} // "x" doesn't need to be a variable in your real program. If it is, that's not related in any way to the "x" here.
int main() {
int y;
int z = 2;
y = foo(z); // Note that x was never involved. That's because the "x" earlier was the formal parameter.
}
Assignment
C allows you to define a variable as equal to a value, in more ways than just simple numerals.
int a = 3; // Declare the variable a of type int, define it equal to decimal 3.
int b = -1; // Declare the variable b of type int and equal to -1 (0xFFFFFFFF in hex).
char letter = "A";
// Declare the variable "letter" of type char and equal to capital A.
// C allows you to treat an ascii value as its numeric equivalent whenever you feel like it. Other languages do not.
char *myString = "Hello"; // Define the array "myString" containing the letters "Hello" followed by a null terminator.
int myArray[5] = {10, 20, 30, 40, 50};
// Declare the array variable "myArray" containing integer values, with a maximum size of 5 elements.
// Then assign 10 to the beginning, 20 after it, 30 after that, and so on.
int c = sum(a, b);
// Declare the integer variable "c".
// Define it to equal the output of the function sum using the previously defined variables "a" and "b" as arguments.
// When this line of code is executed, the computer will perform the function "sum(a,b)" and store the result in c.
// This is only valid if the return type of the function "sum" matches the type of the variable "c."
Declaring vs. Defining
This is a very unintuitive aspect of C that often confuses new users. Declaring a variable or function tells the compiler that a function may exist. Defining a variable or function assigns it a value or procedure, respectively. Compare the two examples below:
int a; // The variable "a" has been declared, but not defined.
a = 2; // Now the variable has been defined.
int a = 2; // The variable "a" has been both declared and defined.
- You cannot define a variable without declaring it first.
- Before a variable can be used, it must be defined.
Types
C has the following types built in by default, but you can create your own based on these using the typedef
directive. This is not an exhaustive list. Some of these names will have different meanings depending on the hardware you're programming for.
char
: an 8 bit value, typically used to represent ASCII characters.short
: a 16 bit value.int
: a 32 bit value.struct
: a collection of several other values, stored consecutively in memory. Each can be a different type.union
: a variable that can hold several different types of data, but only one at a time.float
: a single-precision (32-bit) floating-point decimal value.
You can also add a few modifiers in front of the variable type to be more specific:
unsigned
tells the compiler that this variable is always treated as positive. Computers use two's complement to represent negative numbers, meaning that if the leftmost bit of a number's binary equivalent is set, the value is considered negative. The resulting assembly code will use unsigned comparisons to check this variable against other variables.volatile
tells the compiler that this variable's value can changed by the hardware. This is commonly used for hardware registers such as those that track the mouse cursor's location, a scanline counter, etc. The value will always be read from its original memory location, ensuring that its value is always up-to-date.
Examples:
unsigned int x;
volatile int HorizontalScroll;
Functions are declared in a similar fashion to variables, except a function's "type" is the type of the value it returns.
int foo(int bar);
// The function foo was declared. It takes an integer as an argument and returns an integer.
// What it actually does is currently unknown but can be defined later.
Citation
Todo
Subcategories
This category has the following 3 subcategories, out of 3 total.
@
- C examples needing attention (6 P)
- C Implementations (5 P)
- C User (470 P)
Pages in category "C"
The following 200 pages are in this category, out of 1,303 total.
(previous page) (next page)A
- A* search algorithm
- A+B
- Abbreviations, automatic
- Abbreviations, easy
- Abbreviations, simple
- ABC problem
- ABC words
- Abelian sandpile model
- Abstract type
- Abundant odd numbers
- Abundant, deficient and perfect number classifications
- Accumulator factory
- Ackermann function
- Active Directory/Connect
- Active Directory/Search for a user
- Active object
- Addition chains
- Addition-chain exponentiation
- Additive primes
- Address of a variable
- Air mass
- AKS test for primes
- Align columns
- Aliquot sequence classifications
- Almost prime
- Alternade words
- Amb
- Amicable pairs
- Anagrams
- Anagrams/Deranged anagrams
- Angle difference between two bearings
- Angles (geometric), normalization and conversion
- Animate a pendulum
- Animation
- Anonymous recursion
- Anti-primes
- Append a record to the end of a text file
- Append numbers at same position in strings
- Apply a callback to an array
- Apply a digital filter (direct form II transposed)
- Approximate equality
- Arbitrary-precision integers (included)
- Archimedean spiral
- Arena storage pool
- Arithmetic derivative
- Arithmetic evaluation
- Arithmetic numbers
- Arithmetic-geometric mean
- Arithmetic-geometric mean/Calculate Pi
- Arithmetic/Complex
- Arithmetic/Integer
- Arithmetic/Rational
- Array concatenation
- Array length
- Arrays
- Ascending primes
- ASCII art diagram converter
- ASCII control characters
- Aspect oriented programming
- Assertions
- Associative array/Creation
- Associative array/Iteration
- Atomic updates
- Attractive numbers
- Average loop length
- Averages/Arithmetic mean
- Averages/Mean angle
- Averages/Mean time of day
- Averages/Median
- Averages/Mode
- Averages/Pythagorean means
- Averages/Root mean square
- Averages/Simple moving average
- AVL tree
B
- Babbage problem
- Bacon cipher
- Balanced brackets
- Balanced ternary
- Banker's algorithm
- Barnsley fern
- Base 16 numbers needing a to f
- Base64 decode data
- Base64 encode data
- Bell numbers
- Benford's law
- Bernoulli numbers
- Bernstein basis polynomials
- Best shuffle
- Bilinear interpolation
- Bin given limits
- Binary digits
- Binary search
- Binary strings
- Binomial transform
- Bioinformatics/base count
- Bioinformatics/Sequence mutation
- Biorhythms
- Birthday problem
- Bitcoin/address validation
- Bitcoin/public point to address
- Bitmap
- Bitmap/Bresenham's line algorithm
- Bitmap/Bézier curves/Cubic
- Bitmap/Bézier curves/Quadratic
- Bitmap/Flood fill
- Bitmap/Histogram
- Bitmap/Midpoint circle algorithm
- Bitmap/PPM conversion through a pipe
- Bitmap/Read a PPM file
- Bitmap/Read an image through a pipe
- Bitmap/Write a PPM file
- Bitwise IO
- Bitwise operations
- Blum integer
- Boids
- Boolean values
- Box the compass
- Brace expansion
- Brazilian numbers
- Brownian tree
- Bulls and cows
- Bulls and cows/Player
- Burrows–Wheeler transform
- Bézier curves/Intersections
C
- Caesar cipher
- Calculating the value of e
- Calendar
- Calendar - for "REAL" programmers
- Call a foreign-language function
- Call a function
- Call a function in a shared library
- Call an object method
- Calmo numbers
- CalmoSoft primes
- Canny edge detector
- Canonicalize CIDR
- Cantor set
- Card shuffles
- Carmichael 3 strong pseudoprimes
- Cartesian product of two or more lists
- Case-sensitivity of identifiers
- Casting out nines
- Catalan numbers
- Catalan numbers/Pascal's triangle
- Catamorphism
- Catmull–Clark subdivision surface
- Centroid of a set of N-dimensional points
- Change e letters to i in words
- Changeable words
- Chaocipher
- Chaos game
- Character codes
- Chat server
- Chebyshev coefficients
- Check if a polygon overlaps with a rectangle
- Check if two polygons overlap
- Check input device is a terminal
- Check output device is a terminal
- Check that file exists
- Checkpoint synchronization
- Chemical calculator
- Chernick's Carmichael numbers
- Cheryl's birthday
- Chinese remainder theorem
- Chinese zodiac
- User:Chkas
- Cholesky decomposition
- Chowla numbers
- Cipolla's algorithm
- Circles of given radius through two points
- Circular primes
- Cistercian numerals
- Classes
- Closest-pair problem
- Closures/Value capture
- Code Golf: Code Golf
- Collections
- Color of a screen pixel
- Color quantization
- Colorful numbers
- Colour bars/Display
- Colour pinstripe/Display
- Combinations
- Combinations and permutations
- Combinations with repetitions
- Comma quibbling
- Command-line arguments
- Comments