Perfect numbers: Difference between revisions
No edit summary |
|||
Line 2,916: | Line 2,916: | ||
sum = 1; /* 1 is a proper divisor of every number */ |
sum = 1; /* 1 is a proper divisor of every number */ |
||
f1 = 2; |
f1 = 2; |
||
do while ((f1 * f1) < n); |
do while ((f1 * f1) <= n); |
||
if mod(n, f1) = 0 then |
if mod(n, f1) = 0 then |
||
do; |
do; |
||
Line 2,939: | Line 2,939: | ||
8128 |
8128 |
||
4 perfect numbers were found |
4 perfect numbers were found |
||
</pre> |
</pre> |
||
=={{header|PowerShell}}== |
=={{header|PowerShell}}== |
Revision as of 15:35, 29 October 2021
You are encouraged to solve this task according to the task description, using any language you may know.
Write a function which says whether a number is perfect.
A perfect number is a positive integer that is the sum of its proper positive divisors excluding the number itself.
Equivalently, a perfect number is a number that is half the sum of all of its positive divisors (including itself).
Note: The faster Lucas-Lehmer test is used to find primes of the form 2n-1, all known perfect numbers can be derived from these primes
using the formula (2n - 1) × 2n - 1.
It is not known if there are any odd perfect numbers (any that exist are larger than 102000).
The number of known perfect numbers is 51 (as of December, 2018), and the largest known perfect number contains 49,724,095 decimal digits.
- See also
-
- Rational Arithmetic
- Perfect numbers on OEIS
- Odd Perfect showing the current status of bounds on odd perfect numbers.
11l
<lang 11l>F perf(n)
V sum = 0 L(i) 1 .< n I n % i == 0 sum += i R sum == n
L(i) 1..10000
I perf(i) print(i, end' ‘ ’)</lang>
- Output:
6 28 496 8128
360 Assembly
Simple code
For maximum compatibility, this program uses only the basic instruction set (S/360) and two ASSIST macros (XDECO,XPRNT) to keep it as short as possible. The only added optimization is the loop up to n/2 instead of n-1. With 31 bit integers the limit is 2,147,483,647. <lang 360asm>* Perfect numbers 15/05/2016 PERFECTN CSECT
USING PERFECTN,R13 prolog
SAVEAREA B STM-SAVEAREA(R15) "
DC 17F'0' "
STM STM R14,R12,12(R13) "
ST R13,4(R15) " ST R15,8(R13) " LR R13,R15 " LA R6,2 i=2
LOOPI C R6,NN do i=2 to nn
BH ELOOPI LR R1,R6 i BAL R14,PERFECT LTR R0,R0 if perfect(i) BZ NOTPERF XDECO R6,PG edit i XPRNT PG,L'PG print i
NOTPERF LA R6,1(R6) i=i+1
B LOOPI
ELOOPI L R13,4(0,R13) epilog
LM R14,R12,12(R13) " XR R15,R15 " BR R14 exit
PERFECT SR R9,R9 function perfect(n); sum=0
LA R7,1 j LR R8,R1 n SRA R8,1 n/2
LOOPJ CR R7,R8 do j=1 to n/2
BH ELOOPJ LR R4,R1 n SRDA R4,32 DR R4,R7 n/j LTR R4,R4 if mod(n,j)=0 BNZ NOTMOD AR R9,R7 sum=sum+j
NOTMOD LA R7,1(R7) j=j+1
B LOOPJ
ELOOPJ SR R0,R0 r0=false
CR R9,R1 if sum=n BNE NOTEQ BCTR R0,0 r0=true
NOTEQ BR R14 return(r0); end perfect NN DC F'10000' PG DC CL12' ' buffer
YREGS END PERFECTN</lang>
- Output:
6 28 496 8128
Some optimizations
Use of optimizations found in Rexx algorithms and use of packed decimal to have bigger numbers. With 15 digit decimal integers the limit is 999,999,999,999,999. <lang 360asm>* Perfect numbers 15/05/2016 PERFECPO CSECT
USING PERFECPO,R13 prolog
SAVEAREA B STM-SAVEAREA(R15) "
DC 17F'0' "
STM STM R14,R12,12(R13) "
ST R13,4(R15) " ST R15,8(R13) " LR R13,R15 " ZAP I,I1 i=i1
LOOPI CP I,I2 do i=i1 to i2
BH ELOOPI LA R1,I r1=@i BAL R14,PERFECT perfect(i) LTR R0,R0 if perfect(i) BZ NOTPERF UNPK PG(16),I unpack i OI PG+15,X'F0' XPRNT PG,16 print i
NOTPERF AP I,=P'1' i=i+1
B LOOPI
ELOOPI L R13,4(0,R13) epilog
LM R14,R12,12(R13) " XR R15,R15 " BR R14 exit
PERFECT EQU * function perfect(n);
ZAP N,0(8,R1) n=%r1 CP N,=P'6' if n=6 BNE NOT6 L R0,=F'-1' r0=true B RETURN return(true)
NOT6 ZAP PW,N n
SP PW,=P'1' n-1 ZAP PW2,PW n-1 DP PW2,=PL8'9' (n-1)/9 ZAP R,PW2+8(8) if mod((n-1),9)<>0 BZ ZERO SR R0,R0 r0=false B RETURN return(false)
ZERO ZAP PW2,N n
DP PW2,=PL8'2' n/2 ZAP SUM,PW2(8) sum=n/2 AP SUM,=P'3' sum=n/2+3 ZAP J,=P'3' j=3
LOOPJ ZAP PW,J do loop on j
MP PW,J j*j CP PW,N while j*j<=n BH ELOOPJ ZAP PW2,N n DP PW2,J n/j CP PW2+8(8),=P'0' if mod(n,j)<>0 BNE NEXTJ AP SUM,J sum=sum+j ZAP PW2,N n DP PW2,J n/j AP SUM,PW2(8) sum=sum+j+n/j
NEXTJ AP J,=P'1' j=j+1
B LOOPJ next j
ELOOPJ SR R0,R0 r0=false
CP SUM,N if sum=n BNE RETURN BCTR R0,0 r0=true
RETURN BR R14 return(r0); end perfect I1 DC PL8'1' I2 DC PL8'200000000000' I DS PL8 PG DC CL16' ' buffer N DS PL8 SUM DS PL8 J DS PL8 R DS PL8 C DS CL16 PW DS PL8 PW2 DS PL16
YREGS END PERFECPO</lang>
- Output:
0000000000000006 0000000000000028 0000000000000496 0000000000008128 0000000033550337 0000008589869056 0000137438691328
AArch64 Assembly
<lang AArch64 Assembly> /* ARM assembly AARCH64 Raspberry PI 3B */ /* program perfectNumber64.s */ /* use Euclide Formula : if M=(2puis p)-1 is prime M * (M+1)/2 is perfect see Wikipedia */ /*******************************************/ /* Constantes file */ /*******************************************/ /* for this file see task include a file in language AArch64 assembly */ .include "../includeConstantesARM64.inc"
.equ MAXI, 63
/*********************************/ /* Initialized data */ /*********************************/ .data sMessResult: .asciz "Perfect : @ \n" szMessOverflow: .asciz "Overflow in function isPrime.\n" szCarriageReturn: .asciz "\n"
/*********************************/ /* UnInitialized data */ /*********************************/ .bss sZoneConv: .skip 24 /*********************************/ /* code section */ /*********************************/ .text .global main main: // entry of program
mov x4,2 // start 2 mov x3,1 // counter 2 power
1: // begin loop
lsl x4,x4,1 // 2 power sub x0,x4,1 // - 1 bl isPrime // is prime ? cbz x0,2f // no sub x0,x4,1 // yes mul x1,x0,x4 // multiply m by m-1 lsr x0,x1,1 // divide by 2 bl displayPerfect // and display
2:
add x3,x3,1 // next power of 2 cmp x3,MAXI blt 1b
100: // standard end of the program
mov x0,0 // return code mov x8,EXIT // request to exit program svc 0 // perform the system call
qAdrszCarriageReturn: .quad szCarriageReturn qAdrsMessResult: .quad sMessResult
/******************************************************************/ /* Display perfect number */ /******************************************************************/ /* x0 contains the number */ displayPerfect:
stp x1,lr,[sp,-16]! // save registers ldr x1,qAdrsZoneConv bl conversion10 // call décimal conversion ldr x0,qAdrsMessResult ldr x1,qAdrsZoneConv // insert conversion in message bl strInsertAtCharInc bl affichageMess // display message
100:
ldp x1,lr,[sp],16 // restaur 2 registers ret // return to address lr x30
qAdrsZoneConv: .quad sZoneConv
/***************************************************/ /* is a number prime ? */ /***************************************************/ /* x0 contains the number */ /* x0 return 1 if prime else 0 */ //2147483647 OK //4294967297 NOK //131071 OK //1000003 OK //10001363 OK isPrime:
stp x1,lr,[sp,-16]! // save registres stp x2,x3,[sp,-16]! // save registres mov x2,x0 sub x1,x0,#1 cmp x2,0 beq 99f // return zero cmp x2,2 // for 1 and 2 return 1 ble 2f mov x0,#2 bl moduloPuR64 bcs 100f // error overflow cmp x0,#1 bne 99f // no prime cmp x2,3 beq 2f mov x0,#3 bl moduloPuR64 blt 100f // error overflow cmp x0,#1 bne 99f
cmp x2,5 beq 2f mov x0,#5 bl moduloPuR64 bcs 100f // error overflow cmp x0,#1 bne 99f // Pas premier
cmp x2,7 beq 2f mov x0,#7 bl moduloPuR64 bcs 100f // error overflow cmp x0,#1 bne 99f // Pas premier
cmp x2,11 beq 2f mov x0,#11 bl moduloPuR64 bcs 100f // error overflow cmp x0,#1 bne 99f // Pas premier
cmp x2,13 beq 2f mov x0,#13 bl moduloPuR64 bcs 100f // error overflow cmp x0,#1 bne 99f // Pas premier
2:
cmn x0,0 // carry à zero no error mov x0,1 // prime b 100f
99:
cmn x0,0 // carry à zero no error mov x0,#0 // prime
100:
ldp x2,x3,[sp],16 // restaur des 2 registres ldp x1,lr,[sp],16 // restaur des 2 registres ret
/**************************************************************/
/********************************************************/
/* Compute modulo de b power e modulo m */
/* Exemple 4 puissance 13 modulo 497 = 445 */
/********************************************************/
/* x0 number */
/* x1 exposant */
/* x2 modulo */
moduloPuR64:
stp x1,lr,[sp,-16]! // save registres stp x3,x4,[sp,-16]! // save registres stp x5,x6,[sp,-16]! // save registres stp x7,x8,[sp,-16]! // save registres stp x9,x10,[sp,-16]! // save registres cbz x0,100f cbz x1,100f mov x8,x0 mov x7,x1 mov x6,1 // result udiv x4,x8,x2 msub x9,x4,x2,x8 // remainder
1:
tst x7,1 // if bit = 1 beq 2f mul x4,x9,x6 umulh x5,x9,x6 mov x6,x4 mov x0,x6 mov x1,x5 bl divisionReg128U // division 128 bits cbnz x1,99f // overflow mov x6,x3 // remainder
2:
mul x8,x9,x9 umulh x5,x9,x9 mov x0,x8 mov x1,x5 bl divisionReg128U cbnz x1,99f // overflow mov x9,x3 lsr x7,x7,1 cbnz x7,1b mov x0,x6 // result cmn x0,0 // carry à zero no error b 100f
99:
ldr x0,qAdrszMessOverflow bl affichageMess // display error message cmp x0,0 // carry set error mov x0,-1 // code erreur
100:
ldp x9,x10,[sp],16 // restaur des 2 registres ldp x7,x8,[sp],16 // restaur des 2 registres ldp x5,x6,[sp],16 // restaur des 2 registres ldp x3,x4,[sp],16 // restaur des 2 registres ldp x1,lr,[sp],16 // restaur des 2 registres ret // retour adresse lr x30
qAdrszMessOverflow: .quad szMessOverflow /***************************************************/ /* division d un nombre de 128 bits par un nombre de 64 bits */ /***************************************************/ /* x0 contient partie basse dividende */ /* x1 contient partie haute dividente */ /* x2 contient le diviseur */ /* x0 retourne partie basse quotient */ /* x1 retourne partie haute quotient */ /* x3 retourne le reste */ divisionReg128U:
stp x6,lr,[sp,-16]! // save registres stp x4,x5,[sp,-16]! // save registres mov x5,#0 // raz du reste R mov x3,#128 // compteur de boucle mov x4,#0 // dernier bit
1:
lsl x5,x5,#1 // on decale le reste de 1 tst x1,1<<63 // test du bit le plus à gauche lsl x1,x1,#1 // on decale la partie haute du quotient de 1 beq 2f orr x5,x5,#1 // et on le pousse dans le reste R
2:
tst x0,1<<63 lsl x0,x0,#1 // puis on decale la partie basse beq 3f orr x1,x1,#1 // et on pousse le bit de gauche dans la partie haute
3:
orr x0,x0,x4 // position du dernier bit du quotient mov x4,#0 // raz du bit cmp x5,x2 blt 4f sub x5,x5,x2 // on enleve le diviseur du reste mov x4,#1 // dernier bit à 1
4:
// et boucle subs x3,x3,#1 bgt 1b lsl x1,x1,#1 // on decale le quotient de 1 tst x0,1<<63 lsl x0,x0,#1 // puis on decale la partie basse beq 5f orr x1,x1,#1
5:
orr x0,x0,x4 // position du dernier bit du quotient mov x3,x5
100:
ldp x4,x5,[sp],16 // restaur des 2 registres ldp x6,lr,[sp],16 // restaur des 2 registres ret // retour adresse lr x30
/********************************************************/ /* File Include fonctions */ /********************************************************/ /* for this file see task include a file in language AArch64 assembly */ .include "../includeARM64.inc" </lang>
Perfect : 6 Perfect : 28 Perfect : 496 Perfect : 8128 Perfect : 33550336 Perfect : 8589869056 Perfect : 137438691328 Perfect : 2305843008139952128 Perfect : 8070450532247928832
Ada
<lang ada>function Is_Perfect(N : Positive) return Boolean is
Sum : Natural := 0;
begin
for I in 1..N - 1 loop if N mod I = 0 then Sum := Sum + I; end if; end loop; return Sum = N;
end Is_Perfect;</lang>
ALGOL 60
<lang algol60> begin
comment - return p mod q; integer procedure mod(p, q);
value p, q; integer p, q;
begin
mod := p - q * entier(p / q);
end;
comment - return true if n is perfect, otherwise false; boolean procedure isperfect(n);
value n; integer n;
begin
integer sum, f1, f2; sum := 1; f1 := 2; for f1 := f1 while (f1 * f1) < n do begin if mod(n, f1) = 0 then begin sum := sum + f1; f2 := n / f1; if f2 > f1 then sum := sum + f2; end; f1 := f1 + 1; end; isperfect := (sum = n);
end;
comment - exercise the procedure; integer i, found; outstring(1,"Searching up to 10000 for perfect numbers\n"); found := 0; for i := 2 step 1 until 10000 do
if isperfect(i) then begin outinteger(1,i); found := found + 1; end;
outstring(1,"\n"); outinteger(1,found); outstring(1,"perfect numbers were found");
end </lang>
- Output:
Searching up to 10000 for perfect numbers 6 28 496 8128 4 perfect numbers were found
ALGOL 68
<lang algol68>PROC is perfect = (INT candidate)BOOL: (
INT sum :=1; FOR f1 FROM 2 TO ENTIER ( sqrt(candidate)*(1+2*small real) ) WHILE IF candidate MOD f1 = 0 THEN sum +:= f1; INT f2 = candidate OVER f1; IF f2 > f1 THEN sum +:= f2 FI FI;
- WHILE # sum <= candidate DO
SKIP OD; sum=candidate
);
test:(
FOR i FROM 2 TO 33550336 DO IF is perfect(i) THEN print((i, new line)) FI OD
)</lang>
- Output:
+6 +28 +496 +8128 +33550336
ALGOL W
Based on the Algol 68 version. <lang algolw>begin
% returns true if n is perfect, false otherwise % % n must be > 0 % logical procedure isPerfect ( integer value candidate ) ; begin integer sum; sum := 1; for f1 := 2 until round( sqrt( candidate ) ) do begin if candidate rem f1 = 0 then begin integer f2; sum := sum + f1; f2 := candidate div f1; % avoid e.g. counting 2 twice as a factor of 4 % if f2 > f1 then sum := sum + f2 end if_candidate_rem_f1_eq_0 ; end for_f1 ; sum = candidate end isPerfect ;
% test isPerfect % for n := 2 until 10000 do if isPerfect( n ) then write( n );
end.</lang>
- Output:
6 28 496 8128
AppleScript
Functional
<lang AppleScript>-- PERFECT NUMBERS -----------------------------------------------------------
-- perfect :: integer -> bool on perfect(n)
-- isFactor :: integer -> bool script isFactor on |λ|(x) n mod x = 0 end |λ| end script -- quotient :: number -> number script quotient on |λ|(x) n / x end |λ| end script -- sum :: number -> number -> number script sum on |λ|(a, b) a + b end |λ| end script -- Integer factors of n below the square root set lows to filter(isFactor, enumFromTo(1, (n ^ (1 / 2)) as integer)) -- low and high factors (quotients of low factors) tested for perfection (n > 1) and (foldl(sum, 0, (lows & map(quotient, lows))) / 2 = n)
end perfect
-- TEST ----------------------------------------------------------------------
on run
filter(perfect, enumFromTo(1, 10000)) --> {6, 28, 496, 8128}
end run
-- GENERIC FUNCTIONS ---------------------------------------------------------
-- enumFromTo :: Int -> Int -> [Int] on enumFromTo(m, n)
if m > n then set d to -1 else set d to 1 end if set lst to {} repeat with i from m to n by d set end of lst to i end repeat return lst
end enumFromTo
-- filter :: (a -> Bool) -> [a] -> [a] on filter(f, xs)
tell mReturn(f) set lst to {} set lng to length of xs repeat with i from 1 to lng set v to item i of xs if |λ|(v, i, xs) then set end of lst to v end repeat return lst end tell
end filter
-- foldl :: (a -> b -> a) -> a -> [b] -> a on foldl(f, startValue, xs)
tell mReturn(f) set v to startValue set lng to length of xs repeat with i from 1 to lng set v to |λ|(v, item i of xs, i, xs) end repeat return v end tell
end foldl
-- map :: (a -> b) -> [a] -> [b] on map(f, xs)
tell mReturn(f) set lng to length of xs set lst to {} repeat with i from 1 to lng set end of lst to |λ|(item i of xs, i, xs) end repeat return lst end tell
end map
-- Lift 2nd class handler function into 1st class script wrapper -- mReturn :: Handler -> Script on mReturn(f)
if class of f is script then f else script property |λ| : f end script end if
end mReturn</lang>
- Output:
<lang AppleScript>{6, 28, 496, 8128}</lang>
Idiomatic
Sum of proper divisors
<lang applescript>on aliquotSum(n)
if (n < 2) then return 0 set sum to 1 set sqrt to n ^ 0.5 set limit to sqrt div 1 if (limit = sqrt) then set sum to sum + limit set limit to limit - 1 end if repeat with i from 2 to limit if (n mod i is 0) then set sum to sum + i + n div i end repeat return sum
end aliquotSum
on isPerfect(n)
if (n > 1.37438691328E+11) then return missing value -- Too high for perfection to be determinable. -- All the known perfect numbers listed in Wikipedia end with either 6 or 28. -- These endings are either preceded by odd digits or are the numbers themselves. tell (n mod 10) to ¬ return ((((it = 6) and ((n mod 20 = 16) or (n = 6))) or ¬ ((it = 8) and ((n mod 200 = 128) or (n = 28)))) and ¬ (my aliquotSum(n) = n))
end isPerfect
local output, n set output to {} repeat with n from 1 to 10000
if (isPerfect(n)) then set end of output to n
end repeat return output</lang>
- Output:
<lang applescript>{6, 28, 496, 8128}</lang>
Euclid
<lang applescript>on isPerfect(n)
-- All the known perfect numbers listed in Wikipedia end with either 6 or 28. -- These endings are either preceded by odd digits or are the numbers themselves. tell (n mod 10) to ¬ if not (((it = 6) and ((n mod 20 = 16) or (n = 6))) or ((it = 8) and ((n mod 200 = 128) or (n = 28)))) then ¬ return false -- Work through the only seven primes p where (2 ^ p - 1) is also prime -- and (2 ^ p - 1) * (2 ^ (p - 1)) is a number that AppleScript can handle. repeat with p in {2, 3, 5, 7, 13, 17, 19} tell (2 ^ p - 1) * (2 ^ (p - 1)) if (it < n) then else return (it = n) end if end tell end repeat return missing value
end isPerfect
local output, n set output to {} repeat with n from 2 to 33551000 by 2
if (isPerfect(n)) then set end of output to n
end repeat return output</lang>
- Output:
<lang applescript>{6, 28, 496, 8128, 33550336}</lang>
Practical
But since AppleScript can only physically manage seven of the known perfect numbers, they may as well be in a look-up list for maximum efficiency:
<lang applescript>on isPerfect(n)
if (n > 1.37438691328E+11) then return missing value -- Too high for perfection to be determinable. return (n is in {6, 28, 496, 8128, 33550336, 8.589869056E+9, 1.37438691328E+11})
end isPerfect</lang>
ARM Assembly
<lang ARM Assembly>
/* ARM assembly Raspberry PI */ /* program perfectNumber.s */
/* REMARK 1 : this program use routines in a include file see task Include a file language arm assembly for the routine affichageMess conversion10 see at end of this program the instruction include */
/* for constantes see task include a file in arm assembly */ /************************************/ /* Constantes */ /************************************/ .include "../constantes.inc"
.equ MAXI, 1<<31
/*********************************/ /* Initialized data */ /*********************************/ .data sMessResultPerf: .asciz "Perfect : @ \n" szCarriageReturn: .asciz "\n"
/*********************************/ /* UnInitialized data */ /*********************************/ .bss sZoneConv: .skip 24 /*********************************/ /* code section */ /*********************************/ .text .global main main: @ entry of program
mov r2,#2 @ begin first number
1: @ begin loop
mov r5,#1 @ sum mov r4,#2 @ first divisor 1
2:
udiv r0,r2,r4 @ compute divisor 2 mls r3,r0,r4,r2 @ remainder cmp r3,#0 bne 3f @ remainder = 0 ? add r5,r5,r0 @ add divisor 2 add r5,r5,r4 @ add divisor 1
3:
add r4,r4,#1 @ increment divisor cmp r4,r0 @ divisor 1 < divisor 2 blt 2b @ yes -> loop cmp r2,r5 @ compare number and divisors sum bne 4f @ not equal mov r0,r2 @ equal -> display ldr r1,iAdrsZoneConv bl conversion10 @ call décimal conversion ldr r0,iAdrsMessResultPerf ldr r1,iAdrsZoneConv @ insert conversion in message bl strInsertAtCharInc bl affichageMess @ display message
4:
add r2,#2 @ no perfect number odd < 10 puis 1500 cmp r2,#MAXI @ end ? blo 1b @ no -> loop
100: @ standard end of the program
mov r0, #0 @ return code mov r7, #EXIT @ request to exit program svc #0 @ perform the system call
iAdrszCarriageReturn: .int szCarriageReturn iAdrsMessResultPerf: .int sMessResultPerf iAdrsZoneConv: .int sZoneConv
/***************************************************/ /* ROUTINES INCLUDE */ /***************************************************/ .include "../affichage.inc" </lang>
Perfect : 6 Perfect : 28 Perfect : 496 Perfect : 8128 Perfect : 33550336
Arturo
<lang rebol>divisors: $[n][ select 1..(n/2)+1 'i -> 0 = n % i ] perfect?: $[n][ n = sum divisors n ]
loop 2..1000 'i [ if perfect? i -> print i ]</lang>
AutoHotkey
This will find the first 8 perfect numbers. <lang autohotkey>Loop, 30 {
If isMersennePrime(A_Index + 1) res .= "Perfect number: " perfectNum(A_Index + 1) "`n"
}
MsgBox % res
perfectNum(N) {
Return 2**(N - 1) * (2**N - 1)
}
isMersennePrime(N) {
If (isPrime(N)) && (isPrime(2**N - 1)) Return true
}
isPrime(N) {
Loop, % Floor(Sqrt(N)) If (A_Index > 1 && !Mod(N, A_Index)) Return false Return true
}</lang>
AWK
<lang awk>$ awk 'func perf(n){s=0;for(i=1;i<n;i++)if(n%i==0)s+=i;return(s==n)} BEGIN{for(i=1;i<10000;i++)if(perf(i))print i}' 6 28 496 8128</lang>
Axiom
Using the interpreter, define the function: <lang Axiom>perfect?(n:Integer):Boolean == reduce(+,divisors n) = 2*n</lang> Alternatively, using the Spad compiler: <lang Axiom>)abbrev package TESTP TestPackage TestPackage() : withma
perfect?: Integer -> Boolean == add import IntegerNumberTheoryFunctions perfect? n == reduce("+",divisors n) = 2*n</lang>
Examples (testing 496, testing 128, finding all perfect numbers in 1...10000): <lang Axiom>perfect? 496 perfect? 128 [i for i in 1..10000 | perfect? i]</lang>
- Output:
<lang Axiom>true false [6,28,496,8128]</lang>
BASIC
<lang qbasic>FUNCTION perf(n) sum = 0 for i = 1 to n - 1 IF n MOD i = 0 THEN sum = sum + i END IF NEXT i IF sum = n THEN perf = 1 ELSE perf = 0 END IF END FUNCTION</lang>
BASIC256
<lang BASIC256> function isPerfect(n) if (n < 2) or (n mod 2 = 1) then return False #asumimos que los números impares no son perfectos sum = 1 for i = 2 to sqr(n) if n mod i = 0 then sum += i q = n \ i if q > i then sum += q end if next return n = sum end function
print "Los primeros 5 números perfectos son:" for i = 2 to 233550336 if isPerfect(i) then print i; " "; next i end </lang>
IS-BASIC
<lang IS-BASIC>100 PROGRAM "PerfectN.bas" 110 FOR X=1 TO 10000 120 IF PERFECT(X) THEN PRINT X; 130 NEXT 140 DEF PERFECT(N) 150 IF N<2 OR MOD(N,2)<>0 THEN LET PERFECT=0:EXIT DEF 160 LET S=1 170 FOR I=2 TO SQR(N) 180 IF MOD(N,I)=0 THEN LET S=S+I+N/I 190 NEXT 200 LET PERFECT=N=S 210 END DEF</lang>
Sinclair ZX81 BASIC
Call this subroutine and it will (eventually) return PERFECT = 1 if N is perfect or PERFECT = 0 if it is not. <lang basic>2000 LET SUM=0 2010 FOR F=1 TO N-1 2020 IF N/F=INT (N/F) THEN LET SUM=SUM+F 2030 NEXT F 2040 LET PERFECT=SUM=N 2050 RETURN</lang>
True BASIC
<lang basic> FUNCTION perf(n)
IF n < 2 or ramainder(n,2) = 1 then LET perf = 0 LET sum = 0 FOR i = 1 to n-1 IF remainder(n,i) = 0 then LET sum = sum+i NEXT i IF sum = n then LET perf = 1 ELSE LET perf = 0 END IF
END FUNCTION
PRINT "Los primeros 5 números perfectos son:" FOR i = 1 to 33550336
IF perf(i) = 1 then PRINT i; " ";
NEXT i
PRINT PRINT "Presione cualquier tecla para salir" END </lang>
BBC BASIC
BASIC version
<lang bbcbasic> FOR n% = 2 TO 10000 STEP 2
IF FNperfect(n%) PRINT n% NEXT END DEF FNperfect(N%) LOCAL I%, S% S% = 1 FOR I% = 2 TO SQR(N%)-1 IF N% MOD I% = 0 S% += I% + N% DIV I% NEXT IF I% = SQR(N%) S% += I% = (N% = S%)</lang>
- Output:
6 28 496 8128
Assembler version
<lang bbcbasic> DIM P% 100
[OPT 2 :.S% xor edi,edi .perloop mov eax,ebx : cdq : div ecx : or edx,edx : loopnz perloop : inc ecx add edi,ecx : add edi,eax : loop perloop : mov eax,edi : shr eax,1 : ret : ] FOR B% = 2 TO 35000000 STEP 2 C% = SQRB% IF B% = USRS% PRINT B% NEXT END</lang>
- Output:
4 6 28 496 8128 33550336
Bracmat
<lang bracmat>( ( perf
= sum i . 0:?sum & 0:?i & whl ' ( !i+1:<!arg:?i & ( mod$(!arg.!i):0&!sum+!i:?sum | ) ) & !sum:!arg )
& 0:?n & whl
' ( !n+1:~>10000:?n & (perf$!n&out$!n|) )
);</lang>
- Output:
6 28 496 8128
C
<lang c>#include "stdio.h"
- include "math.h"
int perfect(int n) {
int max = (int)sqrt((double)n) + 1; int tot = 1; int i;
for (i = 2; i < max; i++) if ( (n % i) == 0 ) { tot += i; int q = n / i; if (q > i) tot += q; }
return tot == n;
}
int main() {
int n; for (n = 2; n < 33550337; n++) if (perfect(n)) printf("%d\n", n);
return 0;
}</lang> Using functions from Factors of an integer#Prime factoring: <lang c>int main() { int j; ulong fac[10000], n, sum;
sieve();
for (n = 2; n < 33550337; n++) { j = get_factors(n, fac) - 1; for (sum = 0; j && sum <= n; sum += fac[--j]); if (sum == n) printf("%lu\n", n); }
return 0; }</lang>
C#
<lang csharp>static void Main(string[] args) { Console.WriteLine("Perfect numbers from 1 to 33550337:");
for (int x = 0; x < 33550337; x++) { if (IsPerfect(x)) Console.WriteLine(x + " is perfect."); }
Console.ReadLine(); }
static bool IsPerfect(int num) { int sum = 0; for (int i = 1; i < num; i++) { if (num % i == 0) sum += i; }
return sum == num ; }</lang>
Version using Lambdas, will only work from version 3 of C# on
<lang csharp>static void Main(string[] args) { Console.WriteLine("Perfect numbers from 1 to 33550337:");
for (int x = 0; x < 33550337; x++) { if (IsPerfect(x)) Console.WriteLine(x + " is perfect."); }
Console.ReadLine(); }
static bool IsPerfect(int num) { return Enumerable.Range(1, num - 1).Sum(n => num % n == 0 ? n : 0 ) == num; }</lang>
C++
<lang cpp>#include <iostream> using namespace std ;
int divisor_sum( int number ) {
int sum = 0 ; for ( int i = 1 ; i < number ; i++ ) if ( number % i == 0 ) sum += i ; return sum;
}
int main( ) {
cout << "Perfect numbers from 1 to 33550337:\n" ; for ( int num = 1 ; num < 33550337 ; num++ ) { if (divisor_sum(num) == num) cout << num << '\n' ; } return 0 ;
} </lang>
Clojure
<lang clojure>(defn proper-divisors [n]
(if (< n 4) [1] (->> (range 2 (inc (quot n 2))) (filter #(zero? (rem n %))) (cons 1))))
(defn perfect? [n]
(= (reduce + (proper-divisors n)) n))</lang>
<lang clojure>(defn perfect? [n]
(->> (for [i (range 1 n)] :when (zero? (rem n i))] i) (reduce +) (= n)))</lang>
Functional version
<lang clojure>(defn perfect? [n] (= (reduce + (filter #(zero? (rem n %)) (range 1 n))) n))</lang>
COBOL
main.cbl: <lang cobol> $set REPOSITORY "UPDATE ON"
IDENTIFICATION DIVISION. PROGRAM-ID. perfect-main. ENVIRONMENT DIVISION. CONFIGURATION SECTION. REPOSITORY. FUNCTION perfect . DATA DIVISION. WORKING-STORAGE SECTION. 01 i PIC 9(8). PROCEDURE DIVISION. PERFORM VARYING i FROM 2 BY 1 UNTIL 33550337 = i IF FUNCTION perfect(i) = 0 DISPLAY i END-IF END-PERFORM GOBACK . END PROGRAM perfect-main.</lang>
perfect.cbl: <lang cobol> IDENTIFICATION DIVISION.
FUNCTION-ID. perfect. DATA DIVISION. LOCAL-STORAGE SECTION. 01 max-val PIC 9(8). 01 total PIC 9(8) VALUE 1. 01 i PIC 9(8). 01 q PIC 9(8). LINKAGE SECTION. 01 n PIC 9(8). 01 is-perfect PIC 9. PROCEDURE DIVISION USING VALUE n RETURNING is-perfect. COMPUTE max-val = FUNCTION INTEGER(FUNCTION SQRT(n)) + 1 PERFORM VARYING i FROM 2 BY 1 UNTIL i = max-val IF FUNCTION MOD(n, i) = 0 ADD i TO total DIVIDE n BY i GIVING q IF q > i ADD q TO total END-IF END-IF END-PERFORM IF total = n MOVE 0 TO is-perfect ELSE MOVE 1 TO is-perfect END-IF GOBACK . END FUNCTION perfect.</lang>
CoffeeScript
Optimized version, for fun. <lang coffeescript>is_perfect_number = (n) ->
do_factors_add_up_to n, 2*n
do_factors_add_up_to = (n, desired_sum) ->
# We mildly optimize here, by taking advantage of # the fact that the sum_of_factors( (p^m) * x) # is (1 + ... + p^m-1 + p^m) * sum_factors(x) when # x is not itself a multiple of p.
p = smallest_prime_factor(n) if p == n return desired_sum == p + 1
# ok, now sum up all powers of p that # divide n sum_powers = 1 curr_power = 1 while n % p == 0 curr_power *= p sum_powers += curr_power n /= p # if desired_sum does not divide sum_powers, we # can short circuit quickly return false unless desired_sum % sum_powers == 0 # otherwise, recurse do_factors_add_up_to n, desired_sum / sum_powers
smallest_prime_factor = (n) ->
for i in [2..n] return n if i*i > n return i if n % i == 0
- tests
do ->
# This is pretty fast... for n in [2..100000] console.log n if is_perfect_number n
# For big numbers, let's just sanity check the known ones. known_perfects = [ 33550336 8589869056 137438691328 ] for n in known_perfects throw Error("fail") unless is_perfect_number(n) throw Error("fail") if is_perfect_number(n+1)</lang>
- Output:
> coffee perfect_numbers.coffee 6 28 496 8128
Common Lisp
<lang lisp>(defun perfectp (n)
(= n (loop for i from 1 below n when (= 0 (mod n i)) sum i)))</lang>
D
Functional Version
<lang d>import std.stdio, std.algorithm, std.range;
bool isPerfectNumber1(in uint n) pure nothrow in {
assert(n > 0);
} body {
return n == iota(1, n - 1).filter!(i => n % i == 0).sum;
}
void main() {
iota(1, 10_000).filter!isPerfectNumber1.writeln;
}</lang>
- Output:
[6, 28, 496, 8128]
Faster Imperative Version
<lang d>import std.stdio, std.math, std.range, std.algorithm;
bool isPerfectNumber2(in int n) pure nothrow {
if (n < 2) return false;
int total = 1; foreach (immutable i; 2 .. cast(int)real(n).sqrt + 1) if (n % i == 0) { immutable int q = n / i; total += i; if (q > i) total += q; }
return total == n;
}
void main() {
10_000.iota.filter!isPerfectNumber2.writeln;
}</lang>
- Output:
[6, 28, 496, 8128]
With a 33_550_337.iota
it outputs:
[6, 28, 496, 8128, 33550336]
Dart
Explicit Iterative Version
<lang d>/*
* Function to test if a number is a perfect number * A number is a perfect number if it is equal to the sum of all its divisors * Input: Positive integer n * Output: true if n is a perfect number, false otherwise */
bool isPerfect(int n){
//Generate a list of integers in the range 1 to n-1 : [1, 2, ..., n-1] List<int> range = new List<int>.generate(n-1, (int i) => i+1);
//Create a list that filters the divisors of n from range List<int> divisors = new List.from(range.where((i) => n%i == 0));
//Sum the all the divisors int sumOfDivisors = 0; for (int i = 0; i < divisors.length; i++){ sumOfDivisors = sumOfDivisors + divisors[i]; }
// A number is a perfect number if it is equal to the sum of its divisors // We return the test if n is equal to sumOfDivisors return n == sumOfDivisors;
}</lang>
Compact Version
<lang d>isPerfect(n) =>
n == new List.generate(n-1, (i) => n%(i+1) == 0 ? i+1 : 0).fold(0, (p,n)=>p+n);</lang>
In either case, if we test to find all the perfect numbers up to 1000, we get: <lang d>main() =>
new List.generate(1000,(i)=>i+1).where(isPerfect).forEach(print);</lang>
- Output:
6 28 496
Delphi
See #Pascal.
Dyalect
<lang dyalect>func isPerfect(num) {
var sum = 0 for i in 1..<num { if !i { break } if num % i == 0 { sum += i } } return sum == num
}
let max = 33550337 print("Perfect numbers from 0 to \(max):")
for x in 0..max {
if isPerfect(x) { print("\(x) is perfect") }
}</lang>
E
<lang e>pragma.enable("accumulator") def isPerfectNumber(x :int) {
var sum := 0 for d ? (x % d <=> 0) in 1..!x { sum += d if (sum > x) { return false } } return sum <=> x
}</lang>
Eiffel
<lang Eiffel> class APPLICATION
create make
feature
make do io.put_string (" 6 is perfect...%T") io.put_boolean (is_perfect_number (6)) io.new_line io.put_string (" 77 is perfect...%T") io.put_boolean (is_perfect_number (77)) io.new_line io.put_string ("128 is perfect...%T") io.put_boolean (is_perfect_number (128)) io.new_line io.put_string ("496 is perfect...%T") io.put_boolean (is_perfect_number (496)) end
is_perfect_number (n: INTEGER): BOOLEAN -- Is 'n' a perfect number? require n_positive: n > 0 local sum: INTEGER do across 1 |..| (n - 1) as c loop if n \\ c.item = 0 then sum := sum + c.item end end Result := sum = n end
end </lang>
- Output:
6 is perfect... True 77 is perfect... False 128 is perfect... False 496 is perfect... True
Elena
ELENA 4.x: <lang elena>import system'routines; import system'math; import extensions;
extension extension {
isPerfect() = new Range(1, self - 1).selectBy:(n => (self.mod:n == 0).iif(n,0) ).summarize(new Integer()) == self;
}
public program() {
for(int n := 1, n < 10000, n += 1) { if(n.isPerfect()) { console.printLine(n," is perfect") } }; console.readChar()
}</lang>
- Output:
6 is perfect 28 is perfect 496 is perfect 8128 is perfect
Elixir
<lang elixir>defmodule RC do
def is_perfect(1), do: false def is_perfect(n) when n > 1 do Enum.sum(factor(n, 2, [1])) == n end defp factor(n, i, factors) when n < i*i , do: factors defp factor(n, i, factors) when n == i*i , do: [i | factors] defp factor(n, i, factors) when rem(n,i)==0, do: factor(n, i+1, [i, div(n,i) | factors]) defp factor(n, i, factors) , do: factor(n, i+1, factors)
end
IO.inspect (for i <- 1..10000, RC.is_perfect(i), do: i)</lang>
- Output:
[6, 28, 496, 8128]
Erlang
<lang erlang>is_perfect(X) ->
X == lists:sum([N || N <- lists:seq(1,X-1), X rem N == 0]).</lang>
ERRE
<lang ERRE>PROGRAM PERFECT
PROCEDURE PERFECT(N%->OK%)
LOCAL I%,S% S%=1 FOR I%=2 TO SQR(N%)-1 DO IF N% MOD I%=0 THEN S%+=I%+N% DIV I% END FOR IF I%=SQR(N%) THEN S%+=I% OK%=(N%=S%)
END PROCEDURE
BEGIN
PRINT(CHR$(12);) ! CLS FOR N%=2 TO 10000 STEP 2 DO PERFECT(N%->OK%) IF OK% THEN PRINT(N%) END FOR
END PROGRAM</lang>
- Output:
6 28 496 8128
F#
<lang fsharp>let perf n = n = List.fold (+) 0 (List.filter (fun i -> n % i = 0) [1..(n-1)])
for i in 1..10000 do if (perf i) then printfn "%i is perfect" i</lang>
- Output:
6 is perfect 28 is perfect 496 is perfect 8128 is perfect
Factor
<lang factor>USING: kernel math math.primes.factors sequences ; IN: rosettacode.perfect-numbers
- perfect? ( n -- ? ) [ divisors sum ] [ 2 * ] bi = ;</lang>
FALSE
<lang false>[0\1[\$@$@-][\$@$@$@$@\/*=[@\$@+@@]?1+]#%=]p: 45p;!." "28p;!. { 0 -1 }</lang>
Forth
<lang forth>: perfect? ( n -- ? )
1 over 2/ 1+ 2 ?do over i mod 0= if i + then loop = ;</lang>
Fortran
<lang fortran>FUNCTION isPerfect(n)
LOGICAL :: isPerfect INTEGER, INTENT(IN) :: n INTEGER :: i, factorsum
isPerfect = .FALSE. factorsum = 1 DO i = 2, INT(SQRT(REAL(n))) IF(MOD(n, i) == 0) factorsum = factorsum + i + (n / i) END DO IF (factorsum == n) isPerfect = .TRUE.
END FUNCTION isPerfect</lang>
FreeBASIC
<lang freebasic>' FB 1.05.0 Win64
Function isPerfect(n As Integer) As Boolean
If n < 2 Then Return False If n Mod 2 = 1 Then Return False we can assume odd numbers are not perfect Dim As Integer sum = 1, q For i As Integer = 2 To Sqr(n) If n Mod i = 0 Then sum += i q = n \ i If q > i Then sum += q End If Next Return n = sum
End Function
Print "The first 5 perfect numbers are : " For i As Integer = 2 To 33550336
If isPerfect(i) Then Print i; " ";
Next
Print Print "Press any key to quit" Sleep</lang>
- Output:
The first 5 perfect numbers are : 6 28 496 8128 33550336
Frink
<lang frink>isPerfect = {|n| sum[allFactors[n, true, false]] == n} println[select[1 to 1000, isPerfect]]</lang>
- Output:
[1, 6, 28, 496]
FunL
<lang funl>def perfect( n ) = sum( d | d <- 1..n if d|n ) == 2n
println( (1..500).filter(perfect) )</lang>
- Output:
(6, 28, 496)
GAP
<lang gap>Filtered([1 .. 10000], n -> Sum(DivisorsInt(n)) = 2*n);
- [ 6, 28, 496, 8128 ]</lang>
Go
<lang go>package main
import "fmt"
func computePerfect(n int64) bool {
var sum int64 for i := int64(1); i < n; i++ { if n%i == 0 { sum += i } } return sum == n
}
// following function satisfies the task, returning true for all // perfect numbers representable in the argument type func isPerfect(n int64) bool {
switch n { case 6, 28, 496, 8128, 33550336, 8589869056, 137438691328, 2305843008139952128: return true } return false
}
// validation func main() {
for n := int64(1); ; n++ { if isPerfect(n) != computePerfect(n) { panic("bug") } if n%1e3 == 0 { fmt.Println("tested", n) } }
}
</lang>
- Output:
tested 1000 tested 2000 tested 3000 ...
Groovy
Solution: <lang groovy>def isPerfect = { n ->
n > 4 && (n == (2..Math.sqrt(n)).findAll { n % it == 0 }.inject(1) { factorSum, i -> factorSum += i + n/i })
}</lang> Test program: <lang groovy>(0..10000).findAll { isPerfect(it) }.each { println it }</lang>
- Output:
6 28 496 8128
Haskell
<lang haskell>perfect n =
n == sum [i | i <- [1..n-1], n `mod` i == 0]</lang>
Create a list of known perfects: <lang haskell>perfect =
(\x -> (2 ^ x - 1) * (2 ^ (x - 1))) <$> filter (\x -> isPrime x && isPrime (2 ^ x - 1)) maybe_prime where maybe_prime = scanl1 (+) (2 : 1 : cycle [2, 2, 4, 2, 4, 2, 4, 6]) isPrime n = all ((/= 0) . (n `mod`)) $ takeWhile (\x -> x * x <= n) maybe_prime
isPerfect n = f n perfect
where f n (p:ps) = case compare n p of EQ -> True LT -> False GT -> f n ps
main :: IO () main = do
mapM_ print $ take 10 perfect mapM_ (print . (\x -> (x, isPerfect x))) [6, 27, 28, 29, 496, 8128, 8129]</lang>
or, restricting the search space to improve performance:
<lang haskell>isPerfect :: Int -> Bool
isPerfect n =
let lows = filter ((0 ==) . rem n) [1 .. floor (sqrt (fromIntegral n))] in 1 < n && n == quot (sum (lows ++ [ y | x <- lows , let y = quot n x , x /= y ])) 2
main :: IO () main = print $ filter isPerfect [1 .. 10000]</lang>
- Output:
[6,28,496,8128]
HicEst
<lang HicEst> DO i = 1, 1E4
IF( perfect(i) ) WRITE() i ENDDO
END ! end of "main"
FUNCTION perfect(n)
sum = 1 DO i = 2, n^0.5 sum = sum + (MOD(n, i) == 0) * (i + INT(n/i)) ENDDO perfect = sum == n
END</lang>
Icon and Unicon
<lang Icon>procedure main(arglist) limit := \arglist[1] | 100000 write("Perfect numbers from 1 to ",limit,":") every write(isperfect(1 to limit)) write("Done.") end
procedure isperfect(n) #: returns n if n is perfect local sum,i
every (sum := 0) +:= (n ~= divisors(n)) if sum = n then return n end
link factors</lang>
- Output:
Perfect numbers from 1 to 100000: 6 28 496 8128 Done.
J
<lang j>is_perfect=: +: = >:@#.~/.~&.q:@(6>.<.)</lang>
Examples of use, including extensions beyond those assumptions: <lang j> is_perfect 33550336 1
I. is_perfect i. 100000
6 28 496 8128
] zero_through_twentynine =. i. 3 10 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
is_perfect zero_through_twentynine
0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
is_perfect 191561942608236107294793378084303638130997321548169216x
1</lang>
More efficient version based on comments by Henry Rich and Roger Hui (comment train seeded by Jon Hough).
Java
<lang java>public static boolean perf(int n){ int sum= 0; for(int i= 1;i < n;i++){ if(n % i == 0){ sum+= i; } } return sum == n; }</lang> Or for arbitrary precision: <lang java>import java.math.BigInteger;
public static boolean perf(BigInteger n){ BigInteger sum= BigInteger.ZERO; for(BigInteger i= BigInteger.ONE; i.compareTo(n) < 0;i=i.add(BigInteger.ONE)){ if(n.mod(i).equals(BigInteger.ZERO)){ sum= sum.add(i); } } return sum.equals(n); }</lang>
JavaScript
Imperative
<lang javascript>function is_perfect(n) {
var sum = 1, i, sqrt=Math.floor(Math.sqrt(n)); for (i = sqrt-1; i>1; i--) { if (n % i == 0) { sum += i + n/i; } } if(n % sqrt == 0) sum += sqrt + (sqrt*sqrt == n ? 0 : n/sqrt); return sum === n;
}
var i;
for (i = 1; i < 10000; i++)
{
if (is_perfect(i)) print(i);
}</lang>
- Output:
6 28 496 8128
Functional
ES5
Naive version (brute force)
<lang JavaScript>(function (nFrom, nTo) {
function perfect(n) { return n === range(1, n - 1).reduce( function (a, x) { return n % x ? a : a + x; }, 0 ); }
function range(m, n) { return Array.apply(null, Array(n - m + 1)).map(function (x, i) { return m + i; }); }
return range(nFrom, nTo).filter(perfect);
})(1, 10000);</lang>
Output:
<lang JavaScript>[6, 28, 496, 8128]</lang>
Much faster (more efficient factorisation)
<lang JavaScript>(function (nFrom, nTo) {
function perfect(n) { var lows = range(1, Math.floor(Math.sqrt(n))).filter(function (x) { return (n % x) === 0; });
return n > 1 && lows.concat(lows.map(function (x) { return n / x; })).reduce(function (a, x) { return a + x; }, 0) / 2 === n; }
function range(m, n) { return Array.apply(null, Array(n - m + 1)).map(function (x, i) { return m + i; }); }
return range(nFrom, nTo).filter(perfect)
})(1, 10000);</lang>
Output:
<lang JavaScript>[6, 28, 496, 8128]</lang>
Note that the filter function, though convenient and well optimised, is not strictly necessary. We can always replace it with a more general monadic bind (chain) function, which is essentially just concat map (Monadic return/inject for lists is simply lambda x --> [x], inlined here, and fail is [].)
<lang JavaScript>(function (nFrom, nTo) {
// MONADIC CHAIN (bind) IN LIEU OF FILTER // ( monadic return for lists is just lambda x -> [x] )
return chain( rng(nFrom, nTo), function mPerfect(n) { return (chain( rng(1, Math.floor(Math.sqrt(n))), function (y) { return (n % y) === 0 && n > 1 ? [y, n / y] : []; } ).reduce(function (a, x) { return a + x; }, 0) / 2 === n) ? [n] : []; } );
/******************************************************************/
// Monadic bind (chain) for lists function chain(xs, f) { return [].concat.apply([], xs.map(f)); }
function rng(m, n) { return Array.apply(null, Array(n - m + 1)).map(function (x, i) { return m + i; }); }
})(1, 10000);</lang>
Output: <lang JavaScript>[6, 28, 496, 8128]</lang>
ES6
<lang JavaScript>(() => {
const main = () => enumFromTo(1, 10000).filter(perfect);
// perfect :: Int -> Bool const perfect = n => { const lows = enumFromTo(1, Math.floor(Math.sqrt(n))) .filter(x => (n % x) === 0);
return n > 1 && lows.concat(lows.map(x => n / x)) .reduce((a, x) => (a + x), 0) / 2 === n; };
// GENERIC --------------------------------------------
// enumFromTo :: Int -> Int -> [Int] const enumFromTo = (m, n) => Array.from({ length: n - m + 1 }, (_, i) => i + m)
// MAIN --- return main();
})();</lang>
- Output:
<lang JavaScript>[6, 28, 496, 8128]</lang>
jq
<lang jq> def is_perfect:
. as $in | $in == reduce range(1;$in) as $i (0; if ($in % $i) == 0 then $i + . else . end);
- Example:
range(1;10001) | select( is_perfect )</lang>
- Output:
$ jq -n -f is_perfect.jq 6 28 496 8128
Julia
<lang julia>isperfect(n::Integer) = n == sum([n % i == 0 ? i : 0 for i = 1:(n - 1)]) perfects(n::Integer) = filter(isperfect, 1:n)
@show perfects(10000)</lang>
- Output:
perfects(10000) = [6, 28, 496, 8128]
K
<lang K> perfect:{(x>2)&x=+/-1_{d:&~x!'!1+_sqrt x;d,_ x%|d}x}
perfect 33550336
1
a@&perfect'a:!10000
6 28 496 8128
m:3 10#!30
(0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29)
perfect'/: m
(0 0 0 0 0 0 1 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0)</lang>
Kotlin
<lang scala>// version 1.0.6
fun isPerfect(n: Int): Boolean = when {
n < 2 -> false n % 2 == 1 -> false // there are no known odd perfect numbers else -> { var tot = 1 var q: Int for (i in 2 .. Math.sqrt(n.toDouble()).toInt()) { if (n % i == 0) { tot += i q = n / i if (q > i) tot += q } } n == tot } }
fun main(args: Array<String>) {
// expect a run time of about 6 minutes on a typical laptop println("The first five perfect numbers are:") for (i in 2 .. 33550336) if (isPerfect(i)) print("$i ")
}</lang>
- Output:
The first five perfect numbers are: 6 28 496 8128 33550336
LabVIEW
This image is a VI Snippet, an executable image of LabVIEW code. The LabVIEW version is shown on the top-right hand corner. You can download it, then drag-and-drop it onto the LabVIEW block diagram from a file browser, and it will appear as runnable, editable code.
Lasso
<lang lasso>#!/usr/bin/lasso9
define isPerfect(n::integer) => {
#n < 2 ? return false return #n == ( with i in generateSeries(1, math_floor(math_sqrt(#n)) + 1) where #n % #i == 0 let q = #n / #i sum (#q > #i ? (#i == 1 ? 1 | #q + #i) | 0) )
}
with x in generateSeries(1, 10000)
where isPerfect(#x)
select #x</lang>
- Output:
<lang lasso>6, 28, 496, 8128</lang>
Liberty BASIC
<lang lb>for n =1 to 10000
if perfect( n) =1 then print n; " is perfect."
next n
end
function perfect( n)
sum =0 for i =1 TO n /2 if n mod i =0 then sum =sum +i end if next i if sum =n then perfect= 1 else perfect =0 end if
end function</lang>
Lingo
<lang lingo>on isPercect (n)
sum = 1 cnt = n/2 repeat with i = 2 to cnt if n mod i = 0 then sum = sum + i end repeat return sum=n
end</lang>
Logo
<lang logo>to perfect? :n
output equal? :n apply "sum filter [equal? 0 modulo :n ?] iseq 1 :n/2
end</lang>
Lua
<lang Lua>function isPerfect(x)
local sum = 0 for i = 1, x-1 do
sum = (x % i) == 0 and sum + i or sum
end return sum == x
end</lang>
M2000 Interpreter
<lang M2000 Interpreter> Module PerfectNumbers {
Function Is_Perfect(n as decimal) { s=1 : sN=Sqrt(n) last= n=sN*sN t=n If n mod 2=0 then s+=2+n div 2 i=3 : sN-- While i<sN { if n mod i=0 then t=n div i :i=max.data(n div t, i): s+=t+ i i++ } =n=s } Inventory Known1=2@, 3@ IsPrime=lambda Known1 (x as decimal) -> { =0=1 if exist(Known1, x) then =1=1 : exit if x<=5 OR frac(x) then {if x == 2 OR x == 3 OR x == 5 then Append Known1, x : =1=1 Break} if frac(x/2) else exit if frac(x/3) else exit x1=sqrt(x):d = 5@ {if frac(x/d ) else exit d += 2: if d>x1 then Append Known1, x : =1=1 : exit if frac(x/d) else exit d += 4: if d<= x1 else Append Known1, x : =1=1: exit loop} } \\ Check a perfect and a non perfect number p=2 : n=3 : n1=2 Document Doc$ IsPerfect( 0, 28) IsPerfect( 0, 1544) While p<32 { ' max 32 if isprime(2^p-1@) then { perf=(2^p-1@)*2@^(p-1@) Rem Print perf \\ decompose pretty fast the Perferct Numbers \\ all have a series of 2 and last a prime equal to perf/2^(p-1) inventory queue factors For i=1 to p-1 { Append factors, 2@ } Append factors, perf/2^(p-1) \\ end decompose Rem Print factors IsPerfect(factors, Perf) } p++ } Clipboard Doc$ \\ exit here. No need for Exit statement Sub IsPerfect(factors, n) s=false if n<10000 or type$(factors)<>"Inventory" then { s=Is_Perfect(n) } else { local mm=each(factors, 1, -2), f =true while mm {if eval(mm)<>2 then f=false } if f then if n/2@**(len(mm)-1)= factors(len(factors)-1!) then s=true } Local a$=format$("{0} is {1}perfect number", n, If$(s->"", "not ")) Doc$=a$+{ } Print a$ End Sub
}
PerfectNumbers </lang>
- Output:
28 is perfect number 1544 is not perfect number 6 is perfect number 28 is perfect number 496 is perfect number 8128 is perfect number 33550336 is perfect number 8589869056 is perfect number 137438691328 is perfect number 2305843008139952128 is perfect number
M4
<lang M4>define(`for',
`ifelse($#,0,``$0, `ifelse(eval($2<=$3),1, `pushdef(`$1',$2)$4`'popdef(`$1')$0(`$1',incr($2),$3,`$4')')')')dnl
define(`ispart',
`ifelse(eval($2*$2<=$1),1, `ifelse(eval($1%$2==0),1, `ifelse(eval($2*$2==$1),1, `ispart($1,incr($2),eval($3+$2))', `ispart($1,incr($2),eval($3+$2+$1/$2))')', `ispart($1,incr($2),$3)')', $3)')
define(`isperfect',
`eval(ispart($1,2,1)==$1)')
for(`x',`2',`33550336',
`ifelse(isperfect(x),1,`x
')')</lang>
MAD
<lang MAD> NORMAL MODE IS INTEGER
R FUNCTION THAT CHECKS IF NUMBER IS PERFECT INTERNAL FUNCTION(N) ENTRY TO PERFCT. DSUM = 0 THROUGH SUMMAT, FOR CAND=1, 1, CAND.GE.N
SUMMAT WHENEVER N/CAND*CAND.E.N, DSUM = DSUM+CAND
FUNCTION RETURN DSUM.E.N END OF FUNCTION R PRINT PERFECT NUMBERS UP TO 10,000 THROUGH SHOW, FOR I=1, 1, I.G.10000
SHOW WHENEVER PERFCT.(I), PRINT FORMAT FMT,I
VECTOR VALUES FMT = $I5*$ PRINT COMMENT $ $ END OF PROGRAM
</lang>
- Output:
6 28 496 8128
Maple
<lang Maple>isperfect := proc(n) return evalb(NumberTheory:-SumOfDivisors(n) = 2*n); end proc: isperfect(6);
true</lang>
Mathematica / Wolfram Language
Custom function: <lang Mathematica>PerfectQ[i_Integer] := Total[Divisors[i]] == 2 i</lang> Examples (testing 496, testing 128, finding all perfect numbers in 1...10000): <lang Mathematica>PerfectQ[496] PerfectQ[128] Flatten[PerfectQ/@Range[10000]//Position[#,True]&]</lang> gives back: <lang Mathematica>True False {6,28,496,8128}</lang>
MATLAB
Standard algorithm: <lang MATLAB>function perf = isPerfect(n)
total = 0; for k = 1:n-1 if ~mod(n, k) total = total+k; end end perf = total == n;
end</lang> Faster algorithm: <lang MATLAB>function perf = isPerfect(n)
if n < 2 perf = false; else total = 1; k = 2; quot = n; while k < quot && total <= n if ~mod(n, k) total = total+k; quot = n/k; if quot ~= k total = total+quot; end end k = k+1; end perf = total == n; end
end</lang>
Maxima
<lang maxima>".."(a, b) := makelist(i, i, a, b)$ infix("..")$
perfectp(n) := is(divsum(n) = 2*n)$
sublist(1 .. 10000, perfectp); /* [6, 28, 496, 8128] */</lang>
MAXScript
<lang maxscript>fn isPerfect n = (
local sum = 0 for i in 1 to (n-1) do ( if mod n i == 0 then ( sum += i ) ) sum == n
)</lang>
Microsoft Small Basic
<lang microsoftsmallbasic> For n = 2 To 10000 Step 2
VerifyIfPerfect() If isPerfect = 1 Then TextWindow.WriteLine(n) EndIf
EndFor
Sub VerifyIfPerfect
s = 1 sqrN = Math.SquareRoot(n) If Math.Remainder(n, 2) = 0 Then s = s + 2 + Math.Floor(n / 2) EndIf i = 3 while i <= sqrN - 1 If Math.Remainder(n, i) = 0 Then s = s + i + Math.Floor(n / i) EndIf i = i + 1 EndWhile If i * i = n Then s = s + i EndIf If n = s Then isPerfect = 1 Else isPerfect = 0 EndIf
EndSub </lang>
Modula-2
<lang modula2> MODULE PerfectNumbers;
FROM SWholeIO IMPORT
WriteCard;
FROM STextIO IMPORT
WriteLn;
FROM RealMath IMPORT
sqrt;
VAR
N: CARDINAL;
PROCEDURE IsPerfect(N: CARDINAL): BOOLEAN; VAR
S, I: CARDINAL; SqrtN: REAL;
BEGIN
S := 1; SqrtN := sqrt(FLOAT(N)); IF N REM 2 = 0 THEN S := S + 2 + N / 2; END; I := 3; WHILE FLOAT(I) <= SqrtN - 1.0 DO IF N REM I = 0 THEN S := S + I + N / I; END; I := I + 1; END; IF I * I = N THEN S := S + I; END; RETURN (N = S);
END IsPerfect;
BEGIN
FOR N := 2 TO 10000 BY 2 DO IF IsPerfect(N) THEN WriteCard(N, 5); WriteLn; END; END;
END PerfectNumbers. </lang>
Nanoquery
<lang Nanoquery>def perf(n) sum = 0 for i in range(1, n - 1) if (n % i) = 0 sum += i end end return sum = n end</lang>
Nim
<lang nim>import math
proc isPerfect(n: int): bool =
var sum: int = 1 for d in 2 .. int(n.toFloat.sqrt): if n mod d == 0: inc sum, d let q = n div d if q != d: inc sum, q result = n == sum
for n in 2..10_000:
if n.isPerfect: echo n</lang>
- Output:
6 28 496 8128
Objeck
<lang objeck>bundle Default {
class Test { function : Main(args : String[]) ~ Nil { "Perfect numbers from 1 to 33550337:"->PrintLine(); for(num := 1 ; num < 33550337; num += 1;) { if(IsPerfect(num)) { num->PrintLine(); }; }; }
function : native : IsPerfect(number : Int) ~ Bool { sum := 0 ; for(i := 1; i < number; i += 1;) { if (number % i = 0) { sum += i; }; }; return sum = number; } }
}</lang>
OCaml
<lang ocaml>let perf n =
let sum = ref 0 in for i = 1 to n-1 do if n mod i = 0 then sum := !sum + i done; !sum = n</lang>
Functional style: <lang ocaml>(* range operator *) let rec (--) a b =
if a > b then [] else a :: (a+1) -- b
let perf n = n = List.fold_left (+) 0 (List.filter (fun i -> n mod i = 0) (1 -- (n-1)))</lang>
Oforth
<lang Oforth>: isPerfect(n) | i | 0 n 2 / loop: i [ n i mod ifZero: [ i + ] ] n == ; </lang>
- Output:
#isPerfect 10000 seq filter . [6, 28, 496, 8128]
ooRexx
<lang ooRexx>-- first perfect number over 10000 is 33550336...let's not be crazy loop i = 1 to 10000
if perfectNumber(i) then say i "is a perfect number"
end
- routine perfectNumber
use strict arg n
sum = 0
-- the largest possible factor is n % 2, so no point in -- going higher than that loop i = 1 to n % 2 if n // i == 0 then sum += i end
return sum = n</lang>
- Output:
6 is a perfect number 28 is a perfect number 496 is a perfect number 8128 is a perfect number
Oz
<lang oz>declare
fun {IsPerfect N} fun {IsNFactor I} N mod I == 0 end Factors = {Filter {List.number 1 N-1 1} IsNFactor} in {Sum Factors} == N end
fun {Sum Xs} {FoldL Xs Number.'+' 0} end
in
{Show {Filter {List.number 1 10000 1} IsPerfect}} {Show {IsPerfect 33550336}}</lang>
PARI/GP
Uses built-in method. Faster tests would use the LL test for evens and myriad results on OPNs otherwise. <lang parigp>isPerfect(n)=sigma(n,-1)==2</lang> Show perfect numbers <lang parigp>forprime(p=2, 2281, if(isprime(2^p-1), print(p"\t",(2^p-1)*2^(p-1))))</lang> Faster with Lucas-Lehmer test <lang parigp>p=2;n=3;n1=2; while(p<2281, if(isprime(p), s=Mod(4,n); for(i=3,p, s=s*s-2); if(s==0 || p==2, print("(2^"p"-1)2^("p"-1)=\t"n1*n"\n"))); p++; n1=n+1; n=2*n+1)</lang>
- Output:
(2^2-1)2^(2-1)= 6 (2^3-1)2^(3-1)= 28 (2^5-1)2^(5-1)= 496 (2^7-1)2^(7-1)= 8128 (2^13-1)2^(13-1)= 33550336 (2^17-1)2^(17-1)= 8589869056 (2^19-1)2^(19-1)= 137438691328 (2^31-1)2^(31-1)= 2305843008139952128 (2^61-1)2^(61-1)= 2658455991569831744654692615953842176 (2^89-1)2^(89-1)= 191561942608236107294793378084303638130997321548169216
Pascal
<lang pascal>program PerfectNumbers;
function isPerfect(number: longint): boolean; var i, sum: longint;
begin sum := 1; for i := 2 to round(sqrt(real(number))) do if (number mod i = 0) then sum := sum + i + (number div i); isPerfect := (sum = number); end;
var
candidate: longint;
begin
writeln('Perfect numbers from 1 to 33550337:'); for candidate := 2 to 33550337 do if isPerfect(candidate) then writeln (candidate, ' is a perfect number.');
end.</lang>
- Output:
Perfect numbers from 1 to 33550337: 6 is a perfect number. 28 is a perfect number. 496 is a perfect number. 8128 is a perfect number. 33550336 is a perfect number.
Perl
Functions
<lang perl>sub perf {
my $n = shift; my $sum = 0; foreach my $i (1..$n-1) { if ($n % $i == 0) { $sum += $i; } } return $sum == $n;
}</lang> Functional style: <lang perl>use List::Util qw(sum);
sub perf {
my $n = shift; $n == sum(0, grep {$n % $_ == 0} 1..$n-1);
}</lang>
Modules
The functions above are terribly slow. As usual, this is easier and faster with modules. Both ntheory and Math::Pari have useful functions for this.
A simple predicate: <lang perl>use ntheory qw/divisor_sum/; sub is_perfect { my $n = shift; divisor_sum($n) == 2*$n; }</lang> Use this naive method to show the first 5. Takes about 15 seconds: <lang perl>use ntheory qw/divisor_sum/; for (1..33550336) {
print "$_\n" if divisor_sum($_) == 2*$_;
}</lang> Or we can be clever and look for 2^(p-1) * (2^p-1) where 2^p -1 is prime. The first 20 takes about a second. <lang perl>use ntheory qw/forprimes is_prime/; use bigint; forprimes {
my $n = 2**$_ - 1; print "$_\t", $n * 2**($_-1),"\n" if is_prime($n);
} 2, 4500;</lang>
- Output:
2 6 3 28 5 496 7 8128 13 33550336 17 8589869056 19 137438691328 31 2305843008139952128 61 2658455991569831744654692615953842176 89 191561942608236107294793378084303638130997321548169216 ... 107, 127, 521, 607, 1279, 2203, 2281, 3217, 4253, 4423 ...
We can speed this up even more using a faster program for printing the large results, as well as a faster primality solution. The first 38 in about 1 second with most of the time printing the large results. Caveat: this goes well past the current bound for odd perfect numbers and does not check for them. <lang perl>use ntheory qw/forprimes is_mersenne_prime/; use Math::GMP qw/:constant/; forprimes {
print "$_\t", (2**$_-1)*2**($_-1),"\n" if is_mersenne_prime($_);
} 7_000_000;</lang>
In addition to generating even perfect numbers, we can also have a fast function which returns true when a given even number is perfect: <lang perl>use ntheory qw(is_mersenne_prime valuation);
sub is_even_perfect {
my ($n) = @_; my $v = valuation($n, 2) || return; my $m = ($n >> $v); ($m & ($m + 1)) && return; ($m >> $v) == 1 || return; is_mersenne_prime($v + 1);
}</lang>
Phix
function is_perfect(integer n) return sum(factors(n,-1))=n end function for i=2 to 100000 do if is_perfect(i) then ?i end if end for
- Output:
6 28 496 8128
gmp version
with javascript_semantics -- demo\rosetta\Perfect_numbers.exw (includes native version above) include mpfr.e mpz n = mpz_init(), p = mpz_init() for i=2 to 159 do mpz_ui_pow_ui(n, 2, i) mpz_sub_ui(n, n, 1) if mpz_prime(n) then mpz_ui_pow_ui(p,2,i-1) mpz_mul(n,n,p) printf(1, "%d %s\n",{i,mpz_get_str(n,comma_fill:=true)}) end if end for n = mpz_free(n)
- Output:
2 6 3 28 5 496 7 8,128 13 33,550,336 17 8,589,869,056 19 137,438,691,328 31 2,305,843,008,139,952,128 61 2,658,455,991,569,831,744,654,692,615,953,842,176 89 191,561,942,608,236,107,294,793,378,084,303,638,130,997,321,548,169,216 107 13,164,036,458,569,648,337,239,753,460,458,722,910,223,472,318,386,943,117,783,728,128 127 14,474,011,154,664,524,427,946,373,126,085,988,481,573,677,491,474,835,889,066,354,349,131,199,152,128
PHP
<lang php>function is_perfect($number) {
$sum = 0; for($i = 1; $i < $number; $i++) { if($number % $i == 0) $sum += $i; } return $sum == $number;
}
echo "Perfect numbers from 1 to 33550337:" . PHP_EOL; for($num = 1; $num < 33550337; $num++) {
if(is_perfect($num)) echo $num . PHP_EOL;
}</lang>
PicoLisp
<lang PicoLisp>(de perfect (N)
(let C 0 (for I (/ N 2) (and (=0 (% N I)) (inc 'C I)) ) (= C N) ) )</lang>
<lang PicoLisp>(de faster (N)
(let (C 1 Stop (sqrt N)) (for (I 2 (<= I Stop) (inc I)) (and (=0 (% N I)) (inc 'C (+ (/ N I) I)) ) ) (= C N) ) )</lang>
PL/I
<lang PL/I>perfect: procedure (n) returns (bit(1));
declare n fixed; declare sum fixed; declare i fixed binary;
sum = 0; do i = 1 to n-1; if mod(n, i) = 0 then sum = sum + i; end; return (sum=n);
end perfect;</lang>
PL/I-80
<lang PL/I>perfect_search: procedure options (main);
%replace search_limit by 10000, true by '1'b, false by '0'b;
dcl (k, found) fixed bin;
put skip list ('Searching for perfect numbers up to '); put edit (search_limit) (f(5)); found = 0; do k = 2 to search_limit; if isperfect(k) then do; put skip list(k); found = found + 1; end; end; put skip list (found, ' perfect numbers were found');
/* return true if n is perfect, otherwise false */ isperfect: procedure(n) returns (bit(1));
dcl (n, sum, f1, f2) fixed bin;
sum = 1; /* 1 is a proper divisor of every number */ f1 = 2; do while ((f1 * f1) <= n); if mod(n, f1) = 0 then do; sum = sum + f1; f2 = n / f1; /* don't double count identical co-factors! */ if f2 > f1 then sum = sum + f2; end; f1 = f1 + 1; end; return (sum = n);
end isperfect;
end perfect_search;</lang>
- Output:
Searching for perfect numbers up to 10000 6 28 496 8128 4 perfect numbers were found
PowerShell
<lang powershell>Function IsPerfect($n) { $sum=0
for($i=1;$i-lt$n;$i++) { if($n%$i -eq 0) { $sum += $i } }
return $sum -eq $n }
Returns "True" if the given number is perfect and "False" if it's not.</lang>
Prolog
Classic approach
Works with SWI-Prolog <lang Prolog>tt_divisors(X, N, TT) :- Q is X / N, ( 0 is X mod N -> (Q = N -> TT1 is N + TT;
TT1 is N + Q + TT); TT = TT1),
( sqrt(X) > N + 1 -> N1 is N+1, tt_divisors(X, N1, TT1); TT1 = X).
perfect(X) :- tt_divisors(X, 2, 1).
perfect_numbers(N, L) :- numlist(2, N, LN), include(perfect, LN, L).</lang>
Faster method
Since a perfect number is of the form 2^(n-1) * (2^n - 1), we can eliminate a lot of candidates by merely factoring out the 2s and seeing if the odd portion is (2^(n+1)) - 1. <lang Prolog> perfect(N) :-
factor_2s(N, Chk, Exp), Chk =:= (1 << (Exp+1)) - 1, prime(Chk).
factor_2s(N, S, D) :- factor_2s(N, 0, S, D).
factor_2s(D, S, D, S) :- getbit(D, 0) =:= 1, !. factor_2s(N, E, D, S) :-
E2 is E + 1, N2 is N >> 1, factor_2s(N2, E2, D, S).
% check if a number is prime % wheel235(L) :-
W = [4, 2, 4, 2, 4, 6, 2, 6 | W], L = [1, 2, 2 | W].
prime(N) :-
N >= 2, wheel235(W), prime(N, 2, W).
prime(N, D, _) :- D*D > N, !. prime(N, D, [A|As]) :-
N mod D =\= 0, D2 is D + A, prime(N, D2, As).
</lang>
- Output:
?- between(1, 10_000, N), perfect(N). N = 6 ; N = 28 ; N = 496 ; N = 8128 ; false.
Functional approach
Works with SWI-Prolog and module lambda, written by Ulrich Neumerkel found there http://www.complang.tuwien.ac.at/ulrich/Prolog-inedit/lambda.pl <lang Prolog>:- use_module(library(lambda)).
is_divisor(V, N) :- 0 =:= V mod N.
is_perfect(N) :- N1 is floor(N/2), numlist(1, N1, L), f_compose_1(foldl((\X^Y^Z^(Z is X+Y)), 0), filter(is_divisor(N)), F), call(F, L, N).
f_perfect_numbers(N, L) :- numlist(2, N, LN), filter(is_perfect, LN, L).
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% functionnal predicates
%% foldl(Pred, Init, List, R). % foldl(_Pred, Val, [], Val). foldl(Pred, Val, [H | T], Res) :- call(Pred, Val, H, Val1), foldl(Pred, Val1, T, Res).
%% filter(Pred, LstIn, LstOut) % filter(_Pre, [], []).
filter(Pred, [H|T], L) :- filter(Pred, T, L1), ( call(Pred,H) -> L = [H|L1]; L = L1).
%% f_compose_1(Pred1, Pred2, Pred1(Pred2)). % f_compose_1(F,G, \X^Z^(call(G,X,Y), call(F,Y,Z))).</lang>
PureBasic
<lang PureBasic>Procedure is_Perfect_number(n)
Protected summa, i=1, result=#False Repeat If Not n%i summa+i EndIf i+1 Until i>=n If summa=n result=#True EndIf ProcedureReturn result
EndProcedure</lang>
Python
- Relative timings
Relative timings for sifting the integers from 1 to 50_000 inclusive for perfect numbers.
Function | Time | Type |
---|---|---|
perf4 | 1 | Optimised procedural |
perfect | 1.6 | Optimised functional |
perf1 | 259 | Procedural |
perf2 | 273 | Functional |
Python: Procedural
<lang python>def perf1(n):
sum = 0 for i in range(1, n): if n % i == 0: sum += i return sum == n</lang>
Python: Optimised Procedural
<lang python>from itertools import chain, cycle, accumulate
def factor2(n):
def prime_powers(n): # c goes through 2, 3, 5, then the infinite (6n+1, 6n+5) series for c in accumulate(chain([2, 1, 2], cycle([2,4]))): if c*c > n: break if n%c: continue d,p = (), c while not n%c: n,p,d = n//c, p*c, d + (p,) yield(d) if n > 1: yield((n,))
r = [1] for e in prime_powers(n): r += [a*b for a in r for b in e] return r
def perf4(n):
"Using most efficient prime factoring routine from: http://rosettacode.org/wiki/Factors_of_an_integer#Python" return 2 * n == sum(factor2(n))</lang>
Python: Functional
<lang python>def perf2(n):
return n == sum(i for i in range(1, n) if n % i == 0)
print (
list(filter(perf2, range(1, 10001)))
)</lang>
<lang python>Perfect numbers
from math import sqrt
- perfect :: Int - > Bool
def perfect(n):
Is n the sum of its proper divisors other than 1 ?
root = sqrt(n) lows = [x for x in enumFromTo(2)(int(root)) if 0 == (n % x)] return 1 < n and ( n == 1 + sum(lows + [n / x for x in lows if root != x]) )
- main :: IO ()
def main():
Test
print([ x for x in enumFromTo(1)(10000) if perfect(x) ])
- GENERIC -------------------------------------------------
- enumFromTo :: (Int, Int) -> [Int]
def enumFromTo(m):
Integer enumeration from m to n. return lambda n: list(range(m, 1 + n))
if __name__ == '__main__':
main()</lang>
- Output:
[6, 28, 496, 8128]
Quackery
factors
is defined at Factors of an integer.
<lang Quackery> [ 0 swap witheach + ] is sum ( [ --> n )
[ factors -1 pluck dip sum = ] is perfect ( n --> n )
say "Perfect numbers less than 10000:" cr 10000 times [ i^ 1+ perfect if [ i^ 1+ echo cr ] ]
</lang>
- Output:
Perfect numbers less than 10000: 6 28 496 8128
R
<lang R>is.perf <- function(n){ if (n==0|n==1) return(FALSE) s <- seq (1,n-1) x <- n %% s m <- data.frame(s,x) out <- with(m, s[x==0]) return(sum(out)==n) }
- Usage - Warning High Memory Usage
is.perf(28) sapply(c(6,28,496,8128,33550336),is.perf)</lang>
Racket
<lang racket>#lang racket (require math)
(define (perfect? n)
(= (* n 2) (sum (divisors n))))
- filtering to only even numbers for better performance
(filter perfect? (filter even? (range 1e5)))
- -> '(0 6 28 496 8128)</lang>
Raku
(formerly Perl 6) Naive (very slow) version <lang perl6>sub is-perf($n) { $n == [+] grep $n %% *, 1 .. $n div 2 }
- used as
put ((1..Inf).hyper.grep: {.&is-perf})[^4];</lang>
- Output:
6 28 496 8128
Much, much faster version: <lang perl6>my @primes = lazy (2,3,*+2 … Inf).grep: { .is-prime }; my @perfects = lazy gather for @primes {
my $n = 2**$_ - 1; take $n * 2**($_ - 1) if $n.is-prime;
}
.put for @perfects[^12];</lang>
- Output:
6 28 496 8128 33550336 8589869056 137438691328 2305843008139952128 2658455991569831744654692615953842176 191561942608236107294793378084303638130997321548169216 13164036458569648337239753460458722910223472318386943117783728128 14474011154664524427946373126085988481573677491474835889066354349131199152128
REBOL
<lang rebol>perfect?: func [n [integer!] /local sum] [
sum: 0 repeat i (n - 1) [ if zero? remainder n i [ sum: sum + i ] ] sum = n
]</lang>
REXX
Classic REXX version of ooRexx
This version is a Classic Rexx version of the ooRexx program as of 14-Sep-2013. <lang rexx>/*REXX version of the ooRexx program (the code was modified to run with Classic REXX).*/
do i=1 to 10000 /*statement changed: LOOP ──► DO*/ if perfectNumber(i) then say i "is a perfect number" end
exit
perfectNumber: procedure; parse arg n /*statements changed: ROUTINE,USE*/ sum=0
do i=1 to n%2 /*statement changed: LOOP ──► DO*/ if n//i==0 then sum=sum+i /*statement changed: sum += i */ end
return sum=n</lang> output when using the default of 10000:
6 is a perfect number 28 is a perfect number 496 is a perfect number 8128 is a perfect number
Classic REXX version of PL/I
This version is a Classic REXX version of the PL/I program as of 14-Sep-2013, a REXX say statement
was added to display the perfect numbers. Also, an epilog was written for the re-worked function.
<lang rexx>/*REXX version of the PL/I program (code was modified to run with Classic REXX). */
parse arg low high . /*obtain the specified number(s).*/
if high== & low== then high=34000000 /*if no arguments, use a range. */
if low== then low=1 /*if no LOW, then assume unity.*/
if high== then high=low /*if no HIGH, then assume LOW. */
do i=low to high /*process the single # or range. */ if perfect(i) then say i 'is a perfect number.' end /*i*/
exit
perfect: procedure; parse arg n /*get the number to be tested. */ sum=0 /*the sum of the factors so far. */
do i=1 for n-1 /*starting at 1, find all factors*/ if n//i==0 then sum=sum+i /*I is a factor of N, so add it.*/ end /*i*/
return sum=n /*if the sum matches N, perfect! */</lang> output when using the input defaults of: 1 10000
The output is the same as for the ooRexx version (above).
traditional method
Programming note: this traditional method takes advantage of a few shortcuts:
- testing only goes up to the (integer) square root of X
- testing bypasses the test of the first and last factors
- the corresponding factor is also used when a factor is found
<lang rexx>/*REXX program tests if a number (or a range of numbers) is/are perfect. */ parse arg low high . /*obtain optional arguments from the CL*/ if high== & low=="" then high=34000000 /*if no arguments, then use a range. */ if low== then low=1 /*if no LOW, then assume unity. */ if high== then high=low /*if no HIGH, then assume LOW. */ w=length(high) /*use W for formatting the output. */ numeric digits max(9,w+2) /*ensure enough digits to handle number*/
do i=low to high /*process the single number or a range.*/ if isPerfect(i) then say right(i,w) 'is a perfect number.' end /*i*/
exit /*stick a fork in it, we're all done. */ /*──────────────────────────────────────────────────────────────────────────────────────*/ isPerfect: procedure; parse arg x /*obtain the number to be tested. */
if x<6 then return 0 /*perfect numbers can't be < six. */ s=1 /*the first factor of X. ___*/ do j=2 while j*j<=x /*starting at 2, find the factors ≤√ X */ if x//j\==0 then iterate /*J isn't a factor of X, so skip it.*/ s = s + j + x%j /* ··· add it and the other factor. */ end /*j*/ /*(above) is marginally faster. */ return s==x /*if the sum matches X, it's perfect! */</lang>
output when using the default inputs:
6 is a perfect number. 28 is a perfect number. 496 is a perfect number. 8128 is a perfect number. 33550336 is a perfect number.
For 10,000 numbers tested, this version is 19.6 times faster than the ooRexx program logic.
For 10,000 numbers tested, this version is 25.6 times faster than the PL/I program logic.
Note: For the above timings, only 10,000 numbers were tested.
optimized using digital root
This REXX version makes use of the fact that all known perfect numbers > 6 have a digital root of 1. <lang rexx>/*REXX program tests if a number (or a range of numbers) is/are perfect. */ parse arg low high . /*obtain the specified number(s). */ if high== & low=="" then high=34000000 /*if no arguments, then use a range. */ if low== then low=1 /*if no LOW, then assume unity. */ if high== then high=low /*if no HIGH, then assume LOW. */ w=length(high) /*use W for formatting the output. */ numeric digits max(9,w+2) /*ensure enough digits to handle number*/
do i=low to high /*process the single number or a range.*/ if isPerfect(i) then say right(i,w) 'is a perfect number.' end /*i*/
exit /*stick a fork in it, we're all done. */ /*──────────────────────────────────────────────────────────────────────────────────────*/ isPerfect: procedure; parse arg x 1 y /*obtain the number to be tested. */
if x==6 then return 1 /*handle the special case of six. */ /*[↓] perfect number's digitalRoot = 1*/ do until y<10 /*find the digital root of Y. */ parse var y r 2; do k=2 for length(y)-1; r=r+substr(y,k,1); end /*k*/ y=r /*find digital root of the digit root. */ end /*until*/ /*wash, rinse, repeat ··· */
if r\==1 then return 0 /*Digital root ¬ 1? Then ¬ perfect. */ s=1 /*the first factor of X. ___*/ do j=2 while j*j<=x /*starting at 2, find the factors ≤√ X */ if x//j\==0 then iterate /*J isn't a factor of X, so skip it. */ s = s + j + x%j /*··· add it and the other factor. */ end /*j*/ /*(above) is marginally faster. */ return s==x /*if the sum matches X, it's perfect! */</lang>
output is the same as the traditional version and is about 5.3 times faster (testing 34,000,000 numbers).
optimized using only even numbers
This REXX version uses the fact that all known perfect numbers are even. <lang rexx>/*REXX program tests if a number (or a range of numbers) is/are perfect. */ parse arg low high . /*obtain optional arguments from the CL*/ if high== & low=="" then high=34000000 /*if no arguments, then use a range. */ if low== then low=1 /*if no LOW, then assume unity. */ low=low+low//2 /*if LOW is odd, bump it by one. */ if high== then high=low /*if no HIGH, then assume LOW. */ w=length(high) /*use W for formatting the output. */ numeric digits max(9,w+2) /*ensure enough digits to handle number*/
do i=low to high by 2 /*process the single number or a range.*/ if isPerfect(i) then say right(i,w) 'is a perfect number.' end /*i*/
exit /*stick a fork in it, we're all done. */ /*──────────────────────────────────────────────────────────────────────────────────────*/ isPerfect: procedure; parse arg x 1 y /*obtain the number to be tested. */
if x==6 then return 1 /*handle the special case of six. */
do until y<10 /*find the digital root of Y. */ parse var y 1 r 2; do k=2 for length(y)-1; r=r+substr(y,k,1); end /*k*/ y=r /*find digital root of the digital root*/ end /*until*/ /*wash, rinse, repeat ··· */
if r\==1 then return 0 /*Digital root ¬ 1 ? Then ¬ perfect.*/ s=3 + x%2 /*the first 3 factors of X. ___*/ do j=3 while j*j<=x /*starting at 3, find the factors ≤√ X */ if x//j\==0 then iterate /*J isn't a factor o f X, so skip it.*/ s = s + j + x%j /* ··· add it and the other factor. */ end /*j*/ /*(above) is marginally faster. */ return s==x /*if sum matches X, then it's perfect!*/</lang>
output is the same as the traditional version and is about 11.5 times faster (testing 34,000,000 numbers).
Lucas-Lehmer method
This version uses memoization to implement a fast version of the Lucas-Lehmer test. <lang rexx>/*REXX program tests if a number (or a range of numbers) is/are perfect. */ parse arg low high . /*obtain the optional arguments from CL*/ if high== & low=="" then high=34000000 /*if no arguments, then use a range. */ if low== then low=1 /*if no LOW, then assume unity. */ low=low+low//2 /*if LOW is odd, bump it by one. */ if high== then high=low /*if no HIGH, then assume LOW. */ w=length(high) /*use W for formatting the output. */ numeric digits max(9,w+2) /*ensure enough digits to handle number*/ @.=0; @.1=2 /*highest magic number and its index. */
do i=low to high by 2 /*process the single number or a range.*/ if isPerfect(i) then say right(i,w) 'is a perfect number.' end /*i*/
exit /*stick a fork in it, we're all done. */ /*──────────────────────────────────────────────────────────────────────────────────────*/ isPerfect: procedure expose @.; parse arg x /*obtain the number to be tested. */
/*Lucas-Lehmer know that perfect */ /* numbers can be expressed as: */ /* [2**n - 1] * [2** (n-1) ] */
if @.0<x then do @.1=@.1 while @._<=x; _=(2**@.1-1)*2**(@.1-1); @.0=_; @._=_ end /*@.1*/ /*uses memoization for the formula. */
if @.x==0 then return 0 /*Didn't pass Lucas-Lehmer test? */ s = 3 + x%2 /*we know the following factors: */ /* 1 ('cause Mama said so.) */ /* 2 ('cause it's even.) */ /* x÷2 ( " " " ) ___*/ do j=3 while j*j<=x /*starting at 3, find the factors ≤√ X */ if x//j\==0 then iterate /*J divides X evenly, so ··· */ s=s + j + x%j /*··· add it and the other factor. */ end /*j*/ /*(above) is marginally faster. */ return s==x /*if the sum matches X, it's perfect!*/</lang>
output is the same as the traditional version and is about 75 times faster (testing 34,000,000 numbers).
Lucas-Lehmer + other optimizations
This version uses the Lucas-Lehmer method, digital roots, and restricts itself to even numbers, and
also utilizes a check for the last-two-digits as per François Édouard Anatole Lucas (in 1891).
Also, in the first do loop, the index i is fast advanced according to the last number tested.
An integer square root function was added to limit the factorization of a number. <lang rexx>/*REXX program tests if a number (or a range of numbers) is/are perfect. */ parse arg low high . /*obtain optional arguments from the CL*/ if high== & low=="" then high=34000000 /*No arguments? Then use a range. */ if low== then low=1 /*if no LOW, then assume unity. */ low=low+low//2 /*if LOW is odd, bump it by one. */ if high== then high=low /*if no HIGH, then assume LOW. */ w=length(high) /*use W for formatting the output. */ numeric digits max(9,w+2) /*ensure enough decimal digits for nums*/ @. =0; @.1=2; !.=2; _=' 6' /*highest magic number and its index.*/ !._=22; !.16=12; !.28=8; !.36=20; !.56=20; !.76=20; !.96=20
/* [↑] "Lucas' numbers, in 1891. */ do i=low to high by 0 /*process the single number or a range.*/ if isPerfect(i) then say right(i,w) 'is a perfect number.' i=i+!.? /*use a fast advance for the DO index. */ end /*i*/ /* [↑] note: the DO index is modified.*/
exit /*stick a fork in it, we're all done. */ /*──────────────────────────────────────────────────────────────────────────────────────*/ isPerfect: procedure expose @. !. ? /*expose (make global) some variables. */
parse arg x 1 y -2 ? /*# (and copy), and the last 2 digits.*/ if x==6 then return 1 /*handle the special case of six. */ if !.?==2 then return 0 /*test last two digits: François Lucas.*/ /*╔═════════════════════════════════════════════╗ ║ Lucas─Lehmer know that perfect numbers can ║ ║ be expressed as: [2^n -1] * {2^(n-1) } ║ ╚═════════════════════════════════════════════╝*/ if @.0<x then do @.1=@.1 while @._<=x; _=(2**@.1-1)*2**(@.1-1); @.0=_; @._=_ end /*@.1*/ /* [↑] uses memoization for formula. */
if @.x==0 then return 0 /*Didn't pass Lucas-Lehmer? Not perfect*/ /*[↓] perfect numbers digital root = 1*/ do until y<10 /*find the digital root of Y. */ parse var y d 2; do k=2 for length(y)-1; d=d+substr(y,k,1); end /*k*/ y=d /*find digital root of the digital root*/ end /*until*/ /*wash, rinse, repeat ··· */
if d\==1 then return 0 /*Is digital root ¬ 1? Then ¬ perfect.*/ s=3 + x%2 /*we know the following factors: unity,*/ z=x /*2, and x÷2 (x is even). */ q=1; do while q<=z; q=q*4 ; end /*while q≤z*/ /* _____*/ r=0 /* [↓] R will be the integer √ X */ do while q>1; q=q%4; _=z-r-q; r=r%2; if _>=0 then do; z=_; r=r+q; end end /*while q>1*/ /* [↑] compute the integer SQRT of X.*/ /* _____*/ do j=3 to r /*starting at 3, find factors ≤ √ X */ if x//j==0 then s=s+j+x%j /*J divisible by X? Then add J and X÷J*/ end /*j*/ return s==x /*if the sum matches X, then perfect! */</lang>
output is the same as the traditional version and is about 500 times faster (testing 34,000,000 numbers).
Ring
<lang ring> for i = 1 to 10000
if perfect(i) see i + nl ok
next
func perfect n
sum = 0 for i = 1 to n - 1 if n % i = 0 sum = sum + i ok next
if sum = n return 1 else return 0 ok return sum </lang>
Ruby
<lang ruby>def perf(n)
sum = 0 for i in 1...n sum += i if n % i == 0 end sum == n
end</lang> Functional style: <lang ruby>def perf(n)
n == (1...n).select {|i| n % i == 0}.inject(:+)
end</lang> Faster version: <lang ruby>def perf(n)
divisors = [] for i in 1..Integer.sqrt(n) divisors << i << n/i if n % i == 0 end divisors.uniq.inject(:+) == 2*n
end</lang> Test: <lang ruby>for n in 1..10000
puts n if perf(n)
end</lang>
- Output:
6 28 496 8128
Fast (Lucas-Lehmer)
Generate and memoize perfect numbers as needed. <lang ruby>require "prime"
def mersenne_prime_pow?(p)
# Lucas-Lehmer test; expects prime as argument return true if p == 2 m_p = ( 1 << p ) - 1 s = 4 (p-2).times{ s = (s**2 - 2) % m_p } s == 0
end
@perfect_numerator = Prime.each.lazy.select{|p| mersenne_prime_pow?(p)}.map{|p| 2**(p-1)*(2**p-1)} @perfects = @perfect_numerator.take(1).to_a
def perfect?(num)
@perfects << @perfect_numerator.next until @perfects.last >= num @perfects.include? num
end
- demo
p (1..10000).select{|num| perfect?(num)} t1 = Time.now p perfect?(13164036458569648337239753460458722910223472318386943117783728128) p Time.now - t1 </lang>
- Output:
[6, 28, 496, 8128] true 0.001053954
As the task states, it is not known if there are any odd perfect numbers (any that exist are larger than 10**2000). This program tests 10**2001 in about 30 seconds - but only for even perfects.
Run BASIC
<lang runbasic>for i = 1 to 10000
if perf(i) then print i;" ";
next i
FUNCTION perf(n) for i = 1 TO n - 1
IF n MOD i = 0 THEN sum = sum + i
next i IF sum = n THEN perf = 1 END FUNCTION</lang>
- Output:
6 28 496 8128
Rust
<lang rust> fn main ( ) { fn factor_sum(n: i32) -> i32 { let mut v = Vec::new(); //create new empty array for x in 1..n-1 { //test vaules 1 to n-1 if n%x == 0 { //if current x is a factor of n v.push(x); //add x to the array } }
let mut sum = v.iter().sum(); //iterate over array and sum it up return sum; } fn perfect_nums(n: i32) { for x in 2..n { //test numbers from 1-n if factor_sum(x) == x {//call factor_sum on each value of x, if return value is = x println!("{} is a perfect number.", x); //print value of x } } } perfect_nums(10000);
} </lang>
SASL
Copied from the SASL manual, page 22: <lang SASL> || The function which takes a number and returns a list of its factors (including one but excluding itself) || can be written factors n = { a <- 1.. n/2; n rem a = 0 } || If we define a perfect number as one which is equal to the sum of its factors (for example 6 = 3 + 2 + 1 is perfect) || we can write the list of all perfect numbers as perfects = { n <- 1... ; n = sum(factors n) } </lang>
S-BASIC
<lang basic> $lines
rem - return p mod q function mod(p, q = integer) = integer end = p - q * (p/q)
rem - return true if n is perfect, otherwise false function isperfect(n = integer) = integer
var sum, f1, f2 = integer sum = 1 f1 = 2 while (f1 * f1) <= n do begin if mod(n, f1) = 0 then begin sum = sum + f1 f2 = n / f1 if f2 > f1 then sum = sum + f2 end f1 = f1 + 1 end
end = (sum = n)
rem - exercise the function var k = integer print "Searching up to 10,000 for perfect numbers ..." for k = 2 to 10000
if isperfect(k) then print k
next k print "That's all. Goodbye."
end </lang>
- Output:
Searching up to 10,000 for perfect numbers ... 6 28 496 8128 That's all. Goodbye.
Scala
<lang scala>def perfectInt(input: Int) = ((2 to sqrt(input).toInt).collect {case x if input % x == 0 => x + input / x}).sum == input - 1</lang>
or
<lang scala>def perfect(n: Int) =
(for (x <- 2 to n/2 if n % x == 0) yield x).sum + 1 == n
</lang>
Scheme
<lang scheme>(define (perf n)
(let loop ((i 1) (sum 0)) (cond ((= i n) (= sum n)) ((= 0 (modulo n i)) (loop (+ i 1) (+ sum i))) (else (loop (+ i 1) sum)))))</lang>
Seed7
<lang seed7>$ include "seed7_05.s7i";
const func boolean: isPerfect (in integer: n) is func
result var boolean: isPerfect is FALSE; local var integer: i is 0; var integer: sum is 1; var integer: q is 0; begin for i range 2 to sqrt(n) do if n rem i = 0 then sum +:= i; q := n div i; if q > i then sum +:= q; end if; end if; end for; isPerfect := sum = n; end func;
const proc: main is func
local var integer: n is 0; begin for n range 2 to 33550336 do if isPerfect(n) then writeln(n); end if; end for; end func;</lang>
- Output:
6 28 496 8128 33550336
Sidef
<lang ruby>func is_perfect(n) {
n.sigma == 2*n
}
for n in (1..10000) {
say n if is_perfect(n)
}</lang>
Alternatively, a more efficient check for even perfect numbers: <lang ruby>func is_even_perfect(n) {
var square = (8*n + 1) square.is_square || return false
var t = ((square.isqrt + 1) / 2) t.is_smooth(2) || return false
t-1 -> is_prime
}
for n in (1..10000) {
say n if is_even_perfect(n)
}</lang>
- Output:
6 28 496 8128
Simula
<lang simula>BOOLEAN PROCEDURE PERF(N); INTEGER N; BEGIN
INTEGER SUM; FOR I := 1 STEP 1 UNTIL N-1 DO IF MOD(N, I) = 0 THEN SUM := SUM + I; PERF := SUM = N;
END PERF;</lang>
Slate
<lang slate>n@(Integer traits) isPerfect [
(((2 to: n // 2 + 1) select: [| :m | (n rem: m) isZero]) inject: 1 into: #+ `er) = n
].</lang>
Smalltalk
<lang smalltalk>Integer extend [
"Translation of the C version; this is faster..." isPerfectC [ |tot| tot := 1. (2 to: (self sqrt) + 1) do: [ :i | (self rem: i) = 0 ifTrue: [ |q| tot := tot + i. q := self // i. q > i ifTrue: [ tot := tot + q ] ] ]. ^ tot = self ]
"... but this seems more idiomatic" isPerfect [ ^ ( ( ( 2 to: self // 2 + 1) select: [ :a | (self rem: a) = 0 ] ) inject: 1 into: [ :a :b | a + b ] ) = self ]
].</lang>
<lang smalltalk>1 to: 9000 do: [ :p | (p isPerfect) ifTrue: [ p printNl ] ]</lang>
Swift
<lang Swift>func perfect(n:Int) -> Bool {
var sum = 0 for i in 1..<n { if n % i == 0 { sum += i } } return sum == n
}
for i in 1..<10000 {
if perfect(i) { println(i) }
}</lang>
- Output:
6 28 496 8128
Tcl
<lang tcl>proc perfect n {
set sum 0 for {set i 1} {$i <= $n} {incr i} { if {$n % $i == 0} {incr sum $i} } expr {$sum == 2*$n}
}</lang>
Ursala
<lang Ursala>#import std
- import nat
is_perfect = ~&itB&& ^(~&,~&t+ iota); ^E/~&l sum:-0+ ~| not remainder</lang> This test program applies the function to a list of the first five hundred natural numbers and deletes the imperfect ones. <lang Ursala>#cast %nL
examples = is_perfect*~ iota 500</lang>
- Output:
<6,28,496>
VBA
Using Factors_of_an_integer#VBA, slightly adapted. <lang vb>Private Function Factors(x As Long) As String
Application.Volatile Dim i As Long Dim cooresponding_factors As String Factors = 1 corresponding_factors = x For i = 2 To Sqr(x) If x Mod i = 0 Then Factors = Factors & ", " & i If i <> x / i Then corresponding_factors = x / i & ", " & corresponding_factors End If Next i If x <> 1 Then Factors = Factors & ", " & corresponding_factors
End Function Private Function is_perfect(n As Long)
fs = Split(Factors(n), ", ") Dim f() As Long ReDim f(UBound(fs)) For i = 0 To UBound(fs) f(i) = Val(fs(i)) Next i is_perfect = WorksheetFunction.Sum(f) - n = n
End Function Public Sub main()
Dim i As Long For i = 2 To 100000 If is_perfect(i) Then Debug.Print i Next i
End Sub</lang>
- Output:
6 28 496 8128
VBScript
<lang vb>Function IsPerfect(n) IsPerfect = False i = n - 1 sum = 0 Do While i > 0 If n Mod i = 0 Then sum = sum + i End If i = i - 1 Loop If sum = n Then IsPerfect = True End If End Function
WScript.StdOut.Write IsPerfect(CInt(WScript.Arguments(0))) WScript.StdOut.WriteLine</lang>
- Output:
C:\>cscript /nologo perfnum.vbs 6 True C:\>cscript /nologo perfnum.vbs 29 False C:\>
Wren
Version 1
Restricted to the first four perfect numbers as the fifth one is very slow to emerge. <lang ecmascript>var isPerfect = Fn.new { |n|
if (n <= 2) return false var tot = 1 for (i in 2..n.sqrt.floor) { if (n%i == 0) { tot = tot + i var q = (n/i).floor if (q > i) tot = tot + q } } return n == tot
}
System.print("The first four perfect numbers are:") var count = 0 var i = 2 while (count < 4) {
if (isPerfect.call(i)) { System.write("%(i) ") count = count + 1 } i = i + 2 // there are no known odd perfect numbers
} System.print()</lang>
- Output:
6 28 496 8128
Version 2
This makes use of the fact that all known perfect numbers are of the form (2n - 1) × 2n - 1 where (2n - 1) is prime and finds the first seven perfect numbers instantly. The numbers are too big after that to be represented accurately by Wren. <lang ecmascript>import "/math" for Int
var isPerfect = Fn.new { |n|
if (n <= 2) return false var tot = 1 for (i in 2..n.sqrt.floor) { if (n%i == 0) { tot = tot + i var q = (n/i).floor if (q > i) tot = tot + q } } return n == tot
}
System.print("The first seven perfect numbers are:") var count = 0 var p = 2 while (count < 7) {
var n = 2.pow(p) - 1 if (Int.isPrime(n)) { n = n * 2.pow(p-1) if (isPerfect.call(n)) { System.write("%(n) ") count = count + 1 } } p = p + 1
} System.print()</lang>
- Output:
6 28 496 8128 33550336 8589869056 137438691328
XPL0
<lang XPL0>include c:\cxpl\codes; \intrinsic 'code' declarations
func Perfect(N); \Return 'true' if N is a perfect number int N, S, I, Q; [S:= 1; for I:= 2 to sqrt(N) do
[Q:= N/I; if rem(0)=0 then S:= S+I+Q; ];
return S=N & N#1; ];
int A, N; [for A:= 1 to 16 do
[N:= (1<<A - 1) * 1<<(A-1); if Perfect(N) then [IntOut(0, N); CrLf(0)]; ];
]</lang>
- Output:
6 28 496 8128 33550336
Yabasic
<lang basic> sub isPerfect(n)
if (n < 2) or mod(n, 2) = 1 then return false : endif // asumimos que los números impares no son perfectos sum = 0 for i = 1 to n-1 if mod(n,i) = 0 then sum = sum + i : endif next i if sum = n then return true else return false : endif
end sub
print "Los primeros 5 numeros perfectos son:" for i = 1 to 33550336 if isPerfect(i) then print i, " ", : endif next i print end </lang>
Zig
<lang Zig> const std = @import("std"); const expect = std.testing.expect; const stdout = std.io.getStdOut().outStream();
pub fn main() !void {
var i: u32 = 2; try stdout.print("The first few perfect numbers are: ", .{}); while (i <= 10_000) : (i += 2) if (propersum(i) == i) try stdout.print("{} ", .{i}); try stdout.print("\n", .{});
}
fn propersum(n: u32) u32 {
var sum: u32 = 1; var d: u32 = 2; while (d * d <= n) : (d += 1) if (n % d == 0) { sum += d; const q = n / d; if (q > d) sum += q; }; return sum;
}
test "Proper divisors" {
expect(propersum(28) == 28); expect(propersum(71) == 1); expect(propersum(30) == 42);
} </lang>
- Output:
The first few perfect numbers are: 6 28 496 8128
zkl
<lang zkl>fcn isPerfectNumber1(n)
{ n == [1..n-1].filter('wrap(i){ n % i == 0 }).sum(); }</lang>
- Output:
[1..0d10_000].filter(isPerfectNumber1).println(); L(6,28,496,8128)
- Discrete math
- Programming Tasks
- Prime Numbers
- 11l
- 360 Assembly
- AArch64 Assembly
- Ada
- ALGOL 60
- ALGOL 68
- ALGOL W
- AppleScript
- ARM Assembly
- Arturo
- AutoHotkey
- AWK
- Axiom
- BASIC
- BASIC256
- IS-BASIC
- Sinclair ZX81 BASIC
- True BASIC
- BBC BASIC
- Bracmat
- C
- C sharp
- C++
- Clojure
- COBOL
- CoffeeScript
- Common Lisp
- D
- Dart
- Delphi
- Dyalect
- E
- Eiffel
- Elena
- Elixir
- Erlang
- ERRE
- F Sharp
- Factor
- FALSE
- Forth
- Fortran
- FreeBASIC
- Frink
- FunL
- GAP
- Go
- Groovy
- Haskell
- HicEst
- Icon
- Unicon
- Icon Programming Library
- J
- Java
- Arbitrary precision
- JavaScript
- Jq
- Julia
- K
- Kotlin
- LabVIEW
- Lasso
- Liberty BASIC
- Lingo
- Logo
- Lua
- M2000 Interpreter
- M4
- MAD
- Maple
- Mathematica
- Wolfram Language
- MATLAB
- Maxima
- MAXScript
- Microsoft Small Basic
- Modula-2
- Nanoquery
- Nim
- Objeck
- OCaml
- Oforth
- OoRexx
- Oz
- PARI/GP
- Pascal
- Perl
- Ntheory
- Phix
- Phix/mpfr
- PHP
- PicoLisp
- PL/I
- PL/I-80
- PowerShell
- Prolog
- PureBasic
- Python
- Quackery
- R
- Racket
- Raku
- REBOL
- REXX
- Ring
- Ruby
- Run BASIC
- Rust
- SASL
- S-BASIC
- Scala
- Scheme
- Seed7
- Sidef
- Simula
- Slate
- Smalltalk
- Swift
- Tcl
- Ursala
- VBA
- VBScript
- Wren
- Wren-math
- XPL0
- Yabasic
- Zig
- Zkl