Filter: Difference between revisions
Langurmonkey (talk | contribs) m →{{header|langur}}: change where() to filter(); remove reference to wherekeys() |
|||
Line 1,883: | Line 1,883: | ||
=={{header|langur}}== |
=={{header|langur}}== |
||
Using the |
Using the filter() function filters by a function and returns an array of values. |
||
{{works with|langur|0. |
{{works with|langur|0.11}} |
||
<syntaxhighlight lang="langur">val .arr = series 7 |
<syntaxhighlight lang="langur">val .arr = series 7 |
||
writeln " array: ", .arr |
writeln " array: ", .arr |
||
writeln "filtered: ", |
writeln "filtered: ", filter f .x div 2, .arr</syntaxhighlight> |
||
{{out}} |
{{out}} |
Revision as of 17:54, 24 October 2022
![Task](http://static.miraheze.org/rosettacodewiki/thumb/b/ba/Rcode-button-task-crushed.png/64px-Rcode-button-task-crushed.png)
You are encouraged to solve this task according to the task description, using any language you may know.
- Task
Select certain elements from an Array into a new Array in a generic way.
To demonstrate, select all even numbers from an Array.
As an option, give a second solution which filters destructively,
by modifying the original Array rather than creating a new Array.
11l
V array = Array(1..10)
V even = array.filter(n -> n % 2 == 0)
print(even)
- Output:
[2, 4, 6, 8, 10]
ACL2
(defun filter-evens (xs)
(cond ((endp xs) nil)
((evenp (first xs))
(cons (first xs) (filter-evens (rest xs))))
(t (filter-evens (rest xs)))))
Action!
DEFINE PTR="CARD"
INT value ;used in predicate
PROC PrintArray(INT ARRAY a BYTE size)
BYTE i
Put('[)
FOR i=0 TO size-1
DO
PrintI(a(i))
IF i<size-1 THEN
Put(' )
FI
OD
Put(']) PutE()
RETURN
;jump addr is stored in X and A registers
BYTE FUNC Predicate=*(PTR jumpAddr)
DEFINE STX="$8E"
DEFINE STA="$8D"
DEFINE JSR="$20"
DEFINE RTS="$60"
[STX Predicate+8
STA Predicate+7
JSR $00 $00
RTS]
PROC DoFilter(PTR predicateFun
INT ARRAY src BYTE srcSize
INT ARRAY dst BYTE POINTER dstSize)
INT i
dstSize^=0
FOR i=0 TO srcSize-1
DO
value=src(i)
IF Predicate(predicateFun) THEN
dst(dstSize^)=value
dstSize^==+1
FI
OD
RETURN
PROC DoFilterInplace(PTR predicateFun
INT ARRAY data BYTE POINTER size)
INT i,j
i=0
WHILE i<size^
DO
value=data(i)
IF Predicate(predicateFun)=0 THEN
FOR j=i TO size^-2
DO
data(j)=data(j+1)
OD
size^==-1
ELSE
i==+1
FI
OD
RETURN
BYTE FUNC Even()
IF (value&1)=0 THEN
RETURN (1)
FI
RETURN (0)
BYTE FUNC NonNegative()
IF value>=0 THEN
RETURN (1)
FI
RETURN (0)
PROC Main()
INT ARRAY src=[65532 3 5 2 65529 1 0 65300 4123],dst(9)
BYTE srcSize=[9],dstSize
PrintE("Non destructive operations:") PutE()
PrintE("Original array:")
PrintArray(src,srcSize)
DoFilter(Even,src,srcSize,dst,@dstSize)
PrintE("Select all even numbers:")
PrintArray(dst,dstSize)
DoFilter(NonNegative,src,srcSize,dst,@dstSize)
PrintE("Select all non negative numbers:")
PrintArray(dst,dstSize)
PutE()
PrintE("Destructive operations:") PutE()
PrintE("Original array:")
PrintArray(src,srcSize)
DoFilterInplace(Even,src,@srcSize)
PrintE("Select all even numbers:")
PrintArray(src,srcSize)
DoFilterInplace(NonNegative,src,@srcSize)
PrintE("Select all non negative numbers:")
PrintArray(src,srcSize)
RETURN
- Output:
Screenshot from Atari 8-bit computer
Non destructive operations: Original array: [-4 3 5 2 -7 1 0 -236 4123] Select all even numbers: [-4 2 0 -236] Select all non negative numbers: [3 5 2 1 0 4123] Destructive operations: Original array: [-4 3 5 2 -7 1 0 -236 4123] Select all even numbers: [-4 2 0 -236] Select all non negative numbers: [2 0]
ActionScript
var arr:Array = new Array(1, 2, 3, 4, 5);
var evens:Array = new Array();
for (var i:int = 0; i < arr.length(); i++) {
if (arr[i] % 2 == 0)
evens.push(arr[i]);
}
Actionscript 3
var arr:Array = new Array(1, 2, 3, 4, 5);
arr = arr.filter(function(item:int, index:int, array:Array) {
return item % 2 == 0;
});
Ada
with Ada.Integer_Text_Io; use Ada.Integer_Text_Io;
with Ada.Text_Io; use Ada.Text_Io;
procedure Array_Selection is
type Array_Type is array (Positive range <>) of Integer;
Null_Array : Array_Type(1..0);
function Evens (Item : Array_Type) return Array_Type is
begin
if Item'Length > 0 then
if Item(Item'First) mod 2 = 0 then
return Item(Item'First) & Evens(Item((Item'First + 1)..Item'Last));
else
return Evens(Item((Item'First + 1)..Item'Last));
end if;
else
return Null_Array;
end if;
end Evens;
procedure Print(Item : Array_Type) is
begin
for I in Item'range loop
Put(Item(I));
New_Line;
end loop;
end Print;
Foo : Array_Type := (1,2,3,4,5,6,7,8,9,10);
begin
Print(Evens(Foo));
end Array_Selection;
Here is a non-recursive solution:
with Ada.Text_IO; use Ada.Text_IO;
procedure Array_Selection is
type Array_Type is array (Positive range <>) of Integer;
function Evens (Item : Array_Type) return Array_Type is
Result : Array_Type (1..Item'Length);
Index : Positive := 1;
begin
for I in Item'Range loop
if Item (I) mod 2 = 0 then
Result (Index) := Item (I);
Index := Index + 1;
end if;
end loop;
return Result (1..Index - 1);
end Evens;
procedure Put (Item : Array_Type) is
begin
for I in Item'range loop
Put (Integer'Image (Item (I)));
end loop;
end Put;
begin
Put (Evens ((1,2,3,4,5,6,7,8,9,10)));
New_Line;
end Array_Selection;
Aime
integer
even(integer e)
{
return !(e & 1);
}
list
filter(list l, integer (*f)(integer))
{
integer i;
list v;
i = 0;
while (i < l_length(l)) {
integer e;
e = l_q_integer(l, i);
if (f(e)) {
lb_p_integer(v, e);
}
i += 1;
}
return v;
}
integer
main(void)
{
integer i;
list l;
i = 0;
while (i < 10) {
lb_p_integer(l, i);
i += 1;
}
l = filter(l, even);
i = 0;
while (i < l_length(l)) {
o_space(1);
o_integer(l_q_integer(l, i));
i += 1;
}
o_byte('\n');
return 0;
}
- Output:
0 2 4 6 8
ALGOL 68
MODE TYPE = INT;
PROC select = ([]TYPE from, PROC(TYPE)BOOL where)[]TYPE:
BEGIN
FLEX[0]TYPE result;
FOR key FROM LWB from TO UPB from DO
IF where(from[key]) THEN
[UPB result+1]TYPE new result;
new result[:UPB result] := result;
new result[UPB new result] := from[key];
result := new result
FI
OD;
result
END;
[]TYPE from values = (1,2,3,4,5,6,7,8,9,10);
PROC where even = (TYPE value)BOOL: NOT ODD value;
print((select(from values, where even), new line));
# Or as a simple one line query #
print((select((1,4,9,16,25,36,49,64,81,100), (TYPE x)BOOL: NOT ODD x ), new line))
- Output:
+2 +4 +6 +8 +10 +4 +16 +36 +64 +100
ALGOL W
In the original Algol W, for procedures passed as parameters to another procedure, the types of the expected parameters could not be specified. (The types of the reuired parameters had to match exactly with those in the call)
In the sample below, the select procedure's parameters do not include the parameters of where - they are commented out.
Recent compilers (such as Awe) require the parameter types be specified and so the parameters to where should be uncommented when compilling with Awe.
begin
% sets the elements of out to the elements of in that return true from applying the where procedure to them %
% the bounds of in must be 1 :: inUb - out must be at least as big as in and the number of matching %
% elements is returned in outUb - in and out can be the same array %
procedure select ( integer array in ( * ); integer value inUb
; integer array out ( * ); integer result outUb
; logical procedure where % ( integer value n ) %
) ;
begin
outUb := 0;
for i := 1 until inUb do begin
if where( in( i ) ) then begin
outUb := outUb + 1;
out( outUb ) := in( i )
end f_where_in_i
end for_i
end select ;
% test the select procedure %
logical procedure isEven ( integer value n ) ; not odd( n );
integer array t, out ( 1 :: 10 );
integer outUb;
for i := 1 until 10 do t( i ) := i;
select( t, 10, out, outUb, isEven );
for i := 1 until outUb do writeon( i_w := 3, s_w := 0, out( i ) );
write()
end.
- Output:
2 4 6 8 10
AmigaE
PROC main()
DEF l : PTR TO LONG, r : PTR TO LONG, x
l := [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
r := List(ListLen(l))
SelectList({x}, l, r, `Mod(x,2)=0)
ForAll({x}, r, `WriteF('\d\n', x))
ENDPROC
AntLang
x:range[100]
{1- x mod 2}hfilter x
Apex
List<Integer> integers = new List<Integer>{1,2,3,4,5};
Set<Integer> evenIntegers = new Set<Integer>();
for(Integer i : integers)
{
if(math.mod(i,2) == 0)
{
evenIntegers.add(i);
}
}
system.assert(evenIntegers.size() == 2, 'We should only have two even numbers in the set');
system.assert(!evenIntegers.contains(1), '1 should not be a number in the set');
system.assert(evenIntegers.contains(2), '2 should be a number in the set');
system.assert(!evenIntegers.contains(3), '3 should not be a number in the set');
system.assert(evenIntegers.contains(4), '4 should be a number in the set');
system.assert(!evenIntegers.contains(5), '5 should not be a number in the set');
APL
(0=2|x)/x←⍳20
2 4 6 8 10 12 14 16 18 20
AppleScript
set array to {1, 2, 3, 4, 5, 6}
set evens to {}
repeat with i in array
if (i mod 2 = 0) then set end of evens to i's contents
end repeat
return evens
Result is (a list):
{2, 4, 6}
Here's how you might implement a more generic filter, passing a script object to represent the test that elements must pass (obviously overkill for this simple example):
to filter(inList, acceptor)
set outList to {}
repeat with anItem in inList
if acceptor's accept(anItem) then
set end of outList to contents of anItem
end
end
return outList
end
script isEven
to accept(aNumber)
aNumber mod 2 = 0
end accept
end script
filter({1,2,3,4,5,6}, isEven)
We can simplify and generalise this further by lifting any ordinary predicate handler into a script on the fly.
In this example, as with JavaScript filter lambdas, the lifted handler can optionally have one or two additional arguments:
- The index of the current element
- A reference to the whole list.
This allows for context-sensitive filters, which can take account of following or preceding elements in a sequence.
-------------------------- FILTER --------------------------
-- filter :: (a -> Bool) -> [a] -> [a]
on filter(f, xs)
tell mReturn(f)
set lst to {}
set lng to length of xs
repeat with i from 1 to lng
set v to item i of xs
if |λ|(v, i, xs) then set end of lst to v
end repeat
return lst
end tell
end filter
--------------------------- TEST ---------------------------
on run
filter(even, {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10})
--> {0, 2, 4, 6, 8, 10}
end run
-------------------- GENERIC FUNCTIONS ---------------------
-- even :: Int -> Bool
on even(x)
0 = x mod 2
end even
-- Lift 2nd class handler function into 1st class script wrapper
-- mReturn :: Handler -> Script
on mReturn(f)
if class of f is script then
f
else
script
property |λ| : f
end script
end if
end mReturn
- Output:
{0, 2, 4, 6, 8, 10}
Arturo
arr: [1 2 3 4 5 6 7 8 9 10]
print select arr [x][even? x]
- Output:
2 4 6 8 10
AutoHotkey
array = 1,2,3,4,5,6,7
loop, parse, array, `,
{
if IsEven(A_LoopField)
evens = %evens%,%A_LoopField%
}
stringtrimleft, evens, evens, 1
msgbox % evens
return
IsEven(number)
{
return !mod(number, 2)
}
; ----- Another version: always with csv string ------
array = 1,2,3,4,5,6,7
even(s) {
loop, parse, s, `,
if !mod(A_LoopField, 2)
r .= "," A_LoopField
return SubStr(r, 2)
}
MsgBox % "Array => " array "`n" "Result => " even(array)
; ----- Yet another version: with array (requires AutoHotKey_L) ------
array2 := [1,2,3,4,5,6,7]
even2(a) {
r := []
For k, v in a
if !mod(v, 2)
r.Insert(v)
return r
}
; Add "join" method to string object (just like python)
s_join(o, a) {
Loop, % a.MaxIndex()
r .= o a[A_Index]
return SubStr(r, StrLen(o) + 1)
}
"".base.join := Func("s_join")
MsgBox % "Array => " ",".join(array2) "`n" "Result => " ",".join(even2(array2))
AWK
In this example, an array is filled with the numbers 1..9. In a loop, even elements are collected into the string r. Note that sequence is not necessarily maintained.
One-liner:
$ awk 'BEGIN{split("1 2 3 4 5 6 7 8 9",a);for(i in a)if(!(a[i]%2))r=r" "a[i];print r}'
- Output:
4 6 8 2
Regular script:
BEGIN {
split("1 2 3 4 5 6 7 8 9",a);
for(i in a) if( !(a[i]%2) ) r = r" "a[i];
print r
}
Same output.
Batch File
@echo off
setlocal enabledelayedexpansion
set numberarray=1 2 3 4 5 6 7 8 9 10
for %%i in (%numberarray%) do (
set /a tempcount+=1
set numberarray!tempcount!=%%i
)
echo Filtering all even numbers from numberarray into newarray...
call:filternew numberarray
echo numberarray - %numberarray%
echo newarray -%newarray%
echo.
echo Filtering numberarray so that only even entries remain...
call:filterdestroy numberarray
echo numberarray -%numberarray%
pause>nul
exit /b
:filternew
set arrayname=%1
call:arraylength %arrayname%
set tempcount=0
for /l %%i in (1,1,%length%) do (
set /a cond=!%arrayname%%%i! %% 2
if !cond!==0 (
set /a tempcount+=1
set newarray!tempcount!=!%arrayname%%%i!
set newarray=!newarray! !%arrayname%%%i!
)
)
exit /b
:filterdestroy
set arrayname=%1
call:arraylength %arrayname%
set tempcount=0
set "%arrayname%="
for /l %%i in (1,1,%length%) do (
set /a cond=!%arrayname%%%i! %% 2
if !cond!==0 (
set /a tempcount+=1
set %arrayname%!tempcount!=!%arrayname%%%i!
set %arrayname%=!%arrayname%! !%arrayname%%%i!
)
)
exit /b
:arraylength
set tempcount=0
set lengthname=%1
set length=0
:lengthloop
set /a tempcount+=1
if "!%lengthname%%tempcount%!"=="" exit /b
set /a length+=1
goto lengthloop
- Output:
Filtering all even numbers from numberarray into newarray... numberarray - 1 2 3 4 5 6 7 8 9 10 newarray - 2 4 6 8 10 Filtering numberarray so that only even entries remain... numberarray - 2 4 6 8 10
BBC BASIC
REM Create the test array:
items% = 1000
DIM array%(items%)
FOR index% = 1 TO items%
array%(index%) = RND
NEXT
REM Count the number of filtered items:
filtered% = 0
FOR index% = 1 TO items%
IF FNfilter(array%(index%)) filtered% += 1
NEXT
REM Create a new array containing the filtered items:
DIM new%(filtered%)
filtered% = 0
FOR index% = 1 TO items%
IF FNfilter(array%(index%)) THEN
filtered% += 1
new%(filtered%) = array%(index%)
ENDIF
NEXT
REM Alternatively modify the original array:
filtered% = 0
FOR index% = 1 TO items%
IF FNfilter(array%(index%)) THEN
filtered% += 1
array%(filtered%) = array%(index%)
ENDIF
NEXT
END
DEF FNfilter(A%) = ((A% AND 1) = 0)
BCPL
get "libhdr"
// Copy every value for which p(x) is true from in to out
// This will also work in place by setting out = in
let filter(p, in, ilen, out, olen) be
$( !olen := 0
for i = 0 to ilen-1 do
if p(in!i) do
$( out!!olen := in!i
!olen := !olen + 1
$)
$)
// Write N elements from vector
let writevec(v, n) be
for i = 0 to n-1 do writef("%N ", v!i)
let start() be
$( // Predicates
let even(n) = (n&1) = 0
let mul3(n) = n rem 3 = 0
let nums = table 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
let arr = vec 20
let len = ?
writes("Numbers: ")
writevec(nums, 15)
// Filter 'nums' into 'arr'
filter(even, nums, 15, arr, @len)
writes("*NEven numbers: ")
writevec(arr, len)
// Filter 'arr' in place for multiples of 3
filter(mul3, arr, len, arr, @len)
writes("*NEven multiples of 3: ")
writevec(arr, len)
wrch('*N')
$)
- Output:
Numbers: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Even numbers: 2 4 6 8 10 12 14 Even multiples of 3: 6 12
Bracmat
( :?odds
& ( 1 2 3 4 5 6 7 8 9 10 16 25 36 49 64 81 100:? (=.!sjt*1/2:/&!odds !sjt:?odds)$() ()
| !odds
)
)
1 3 5 7 9 25 49 81
Brat
#Prints [2, 4, 6, 8, 10]
p 1.to(10).select { x | x % 2 == 0 }
Burlesque
blsq ) 1 13r@{2.%n!}f[
{2 4 6 8 10 12}
BQN
General filtering is done using the /
(Replicate) function, which can fliter elements given a bitmask. We can make a modifier based on it to accept a function for filtering.
_filter ← {(𝔽𝕩)/𝕩}
Odd ← 2⊸|
Odd _filter 1‿2‿3‿4‿5
⟨ 1 3 5 ⟩
C
#include <stdio.h>
#include <stdlib.h>
int even_sel(int x) { return !(x & 1); }
int tri_sel(int x) { return x % 3; }
/* using a predicate function sel() to select elements */
int* grep(int *in, int len, int *outlen, int (*sel)(int), int inplace)
{
int i, j, *out;
if (inplace) out = in;
else out = malloc(sizeof(int) * len);
for (i = j = 0; i < len; i++)
if (sel(in[i]))
out[j++] = in[i];
if (!inplace && j < len)
out = realloc(out, sizeof(int) * j);
*outlen = j;
return out;
}
int main()
{
int in[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
int i, len;
int *even = grep(in, 10, &len, even_sel, 0);
printf("Filtered even:");
for (i = 0; i < len; i++) printf(" %d", even[i]);
printf("\n");
grep(in, 8, &len, tri_sel, 1);
printf("In-place filtered not multiple of 3:");
for (i = 0; i < len; i++) printf(" %d", in[i]);
printf("\n");
return 0;
}
- Output:
Filtered even: 2 4 6 8 10 In-place filtered not multiple of 3: 1 2 4 5 7 8 10
C#
ArrayList array = new ArrayList( new int[] { 1, 2, 3, 4, 5 } );
ArrayList evens = new ArrayList();
foreach( int i in array )
{
if( (i%2) == 0 )
evens.Add( i );
}
foreach( int i in evens )
System.Console.WriteLine( i.ToString() );
List<int> array = new List<int>( new int[] { 1, 2, 3, 4, 5 } );
List<int> evens = array.FindAll( delegate( int i ) { return (i%2)==0; } );
foreach( int i in evens )
System.Console.WriteLine( i.ToString() );
IEnumerable<int> array = new List<int>( new int[] { 1, 2, 3, 4, 5 } );
IEnumerable<int> evens = array.Where( delegate( int i ) { return (i%2)==0; } );
foreach( int i in evens )
System.Console.WriteLine( i.ToString() );
Replacing the delegate with the more concise lambda expression syntax.
int[] array = { 1, 2, 3, 4, 5 };
int[] evens = array.Where(i => (i % 2) == 0).ToArray();
foreach (int i in evens)
Console.WriteLine(i);
C++
#include <vector>
#include <algorithm>
#include <functional>
#include <iterator>
#include <iostream>
int main() {
std::vector<int> ary;
for (int i = 0; i < 10; i++)
ary.push_back(i);
std::vector<int> evens;
std::remove_copy_if(ary.begin(), ary.end(), back_inserter(evens),
std::bind2nd(std::modulus<int>(), 2)); // filter copy
std::copy(evens.begin(), evens.end(),
std::ostream_iterator<int>(std::cout, "\n"));
return 0;
}
#include <vector>
#include <algorithm>
#include <iterator>
#include <iostream>
using namespace std;
int main() {
vector<int> ary = {1, 2, 3, 4, 5, 6, 7, 8, 9};
vector<int> evens;
copy_if(ary.begin(), ary.end(), back_inserter(evens),
[](int i) { return i % 2 == 0; });
// print result
copy(evens.begin(), evens.end(), ostream_iterator<int>(cout, "\n"));
}
Clean
The standard environment is required for list and array comprehensions. We specify the types of the functions because array comprehensions are overloaded. Clean provides lazy, strict, and unboxed arrays.
module SelectFromArray
import StdEnv
Create a lazy array where each element comes from the list 1 to 10.
array :: {Int}
array = {x \\ x <- [1 .. 10]}
Create (and print) a strict array where each element (coming from another array) is even.
Start :: {!Int}
Start = {x \\ x <-: array | isEven x}
Clojure
;; range and filter create lazy seq's
(filter even? (range 0 100))
;; vec will convert any type of seq to an array
(vec (filter even? (vec (range 0 100))))
CoffeeScript
[1..10].filter (x) -> not (x%2)
- Output:
[ 2, 4, 6, 8, 10 ]
Common Lisp
Common Lisp has many ways of accomplishing this task. Most of them involve higher-order sequence functions that take a predicate as the first argument and a list as the second argument. A predicate is a function that returns a boolean. The higher-order functions call the predicate for each element in list, testing the element.
In this example, the goal is to find the even numbers. The most straight-forward function is to use remove-if-not, which removes elements from the list that does not pass the predicate. The predicate, in this case, tests to see if an element is even. Therefore, the remove-if-not acts like a filter:
(remove-if-not #'evenp '(1 2 3 4 5 6 7 8 9 10))
> (2 4 6 8 10)
However, this function is non-destructive, meaning the function creates a brand new list. This might be too prohibitive for very large lists.
Destructive
There is a destructive version that modifies the list in-place:
(delete-if-not #'evenp '(1 2 3 4 5 6 7 8 9 10))
> (2 4 6 8 10)
Cowgol
include "cowgol.coh";
# Cowgol has strict typing and there are no templates either.
# Defining the type this way makes it easy to change.
typedef FilterT is uint32;
# In order to pass functions around, we need to define an
# interface. The 'FilterPredicate' interface will take an argument
# and return zero if it should be filtered out.
interface FilterPredicate(x: FilterT): (keep: uint8);
# Filter an array and store it a new location. Returns the new length.
sub Filter(f: FilterPredicate,
items: [FilterT],
length: intptr,
result: [FilterT]):
(newLength: intptr) is
newLength := 0;
while length > 0 loop
var item := [items];
items := @next items;
if f(item) != 0 then
[result] := item;
result := @next result;
newLength := newLength + 1;
end if;
length := length - 1;
end loop;
end sub;
# Filter an array in place. Returns the new length.
sub FilterInPlace(f: FilterPredicate,
items: [FilterT],
length: intptr):
(newLength: intptr) is
newLength := Filter(f, items, length, items);
end sub;
# Filter that selects even numbers
sub Even implements FilterPredicate is
keep := (~ x as uint8) & 1;
end sub;
# Filter an array
var array: uint32[] := {1, 2, 3, 4, 5, 6, 7, 8, 9, 10};
var filtered: uint32[@sizeof array];
var length := Filter(Even, &array[0], @sizeof array, &filtered[0]);
# Print result
var i: uint8 := 0;
while i < length as uint8 loop
print_i32(filtered[i]);
print_char(' ');
i := i + 1;
end loop;
print_nl();
# Filter the result again in place for numbers less than 8
sub LessThan8 implements FilterPredicate is
if x < 8 then keep := 1;
else keep := 0;
end if;
end sub;
length := FilterInPlace(LessThan8, &filtered[0], length);
i := 0;
while i < length as uint8 loop
print_i32(filtered[i]);
print_char(' ');
i := i + 1;
end loop;
print_nl();
- Output:
2 4 6 8 10 2 4 6
D
void main() {
import std.algorithm: filter, equal;
immutable data = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
auto evens = data.filter!(x => x % 2 == 0); // Lazy.
assert(evens.equal([2, 4, 6, 8, 10]));
}
Tango Version
import tango.core.Array, tango.io.Stdout;
void main() {
auto array = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
// removeIf places even elements at the beginnig of the array and returns number of found evens
auto evens = array.removeIf( ( typeof(array[0]) i ) { return (i % 2) == 1; } );
Stdout("Evens - ")( array[0 .. evens] ).newline; // The order of even elements is preserved
Stdout("Odds - ")( array[evens .. $].sort ).newline; // Unlike odd elements
}
- Output:
Evens - [ 2, 4, 6, 8, 10 ] Odds - [ 1, 3, 5, 7, 9 ]
Delphi
Hand-coded version
program FilterEven;
{$APPTYPE CONSOLE}
uses SysUtils, Types;
const
SOURCE_ARRAY: array[0..9] of Integer = (0,1,2,3,4,5,6,7,8,9);
var
i: Integer;
lEvenArray: TIntegerDynArray;
begin
for i in SOURCE_ARRAY do
begin
if not Odd(i) then
begin
SetLength(lEvenArray, Length(lEvenArray) + 1);
lEvenArray[Length(lEvenArray) - 1] := i;
end;
end;
for i in lEvenArray do
Write(i:3);
Writeln;
end.
Using Boost.Int library
Alternative using Boost.Int[1]:
program FilterEven;
{$APPTYPE CONSOLE}
uses
System.SysUtils,
Types,
Boost.Int;
var
Source, Destiny: TIntegerDynArray;
begin
Source.Assign([0, 1, 2, 3, 4, 5, 6, 7, 8, 9]);
// Non-destructively
Destiny := Source.Filter(
function(Item: Integer): Boolean
begin
Result := not odd(Item) and (Item <> 0);
end);
Writeln('[' + Destiny.Comma + ']');
Readln;
end.
// Destructively
Source.Remove(
function(Item: Integer): Boolean
begin
Result := odd(Item) or (Item = 0);
end);
Writeln('[' + Source.Comma + ']');
End.
- Output:
[2,4,6,8] [2,4,6,8]
Dyalect
Non-destructively
func Array.Filter(pred) {
var arr = []
for x in this when pred(x) {
arr.Add(x)
}
arr
}
var arr = [1..20].Filter(x => x % 2 == 0)
print(arr)
- Output:
[2, 4, 6, 8, 10, 12, 14, 16, 18, 20]
Destructively
func Array.Filter(pred) {
var i = 0
while i < this.Length() {
if !pred(this[i]) {
this.RemoveAt(i)
}
i += 1
}
}
var arr = [1..20]
arr.Filter(x => x % 2 == 0)
print(arr)
- Output:
[2, 4, 6, 8, 10, 12, 14, 16, 18, 20]
Idiomatic approach
Idiomatic approach in Dy is to use non-strict iterators (which can be combined without intermedate data structures) and translate the result to an array if needed:
var xs = [1..20]
var arr = xs.Iterate().Filter(x => x % 2 == 0).Map(x => x.ToString())
print(arr.ToArray())
- Output:
["2", "4", "6", "8", "10", "12", "14", "16", "18", "20"]
Déjà Vu
Non-destructively
filter pred lst:
]
for value in copy lst:
if pred @value:
@value
[
even x:
= 0 % x 2
!. filter @even [ 0 1 2 3 4 5 6 7 8 9 ]
- Output:
[ 0 2 4 6 8 ]
Destructively
local :lst [ 0 1 2 3 4 5 6 7 8 9 ]
filter-destructively pred lst:
local :tmp []
while lst:
pop-from lst
if pred dup:
push-to tmp
else:
drop
while tmp:
push-to lst pop-from tmp
filter-destructively @even lst
!. lst
- Output:
[ 0 2 4 6 8 ]
E
There are several ways this could be done.
pragma.enable("accumulator")
accum [] for x ? (x %% 2 <=> 0) in [1,2,3,4,5,6,7,8,9,10] { _.with(x) }
var result := []
for x ? (x %% 2 <=> 0) in [1,2,3,4,5,6,7,8,9,10] {
result with= x
}
result
def makeSeries := <elang:control.makeSeries>
makeSeries([1,2,3,4,5,6,7,8,9,10]).filter(fn x,_{x %% 2 <=> 0}).asList()
EasyLang
a[] = [ 1 2 3 4 5 6 7 8 9 ]
for i = 1 to len a[]
if a[i] mod 2 = 0
b[] &= a[i]
.
.
print b[]
EchoLisp
(iota 12) → { 0 1 2 3 4 5 6 7 8 9 10 11 }
;; lists
(filter even? (iota 12))
→ (0 2 4 6 8 10)
;; array (non destructive)
(vector-filter even? #(1 2 3 4 5 6 7 8 9 10 11 12 13))
→ #( 2 4 6 8 10 12)
;; sequence, infinite, lazy
(lib 'sequences)
(define evens (filter even? [0 ..]))
(take evens 12)
→ (0 2 4 6 8 10 12 14 16 18 20 22)
Ela
Using higher-order function (non-strict version)
open list
evenList = filter' (\x -> x % 2 == 0) [1..]
Using comprehension (non-strict version)
evenList = [& x \\ x <- [1..] | x % 2 == 0]
Elena
ELENA 5.0 :
import system'routines;
import system'math;
import extensions;
import extensions'routines;
public program()
{
auto array := new int[]{1,2,3,4,5};
var evens := array.filterBy:(n => n.mod:2 == 0).toArray();
evens.forEach:printingLn
}
Using strong typed collections and extensions:
import system'collections;
import system'routines'stex;
import system'math;
import extensions;
public program()
{
int[] array := new int[]{1,2,3,4,5};
array
.filterBy:(int n => n.mod:2 == 0)
.forEach:(int i){ console.printLine(i) }
}
- Output:
2 4
Elixir
iex(10)> numbers = Enum.to_list(1..9)
[1, 2, 3, 4, 5, 6, 7, 8, 9]
iex(11)> Enum.filter(numbers, fn x -> rem(x,2)==0 end)
[2, 4, 6, 8]
iex(12)> for x <- numbers, rem(x,2)==0, do: x # comprehension
[2, 4, 6, 8]
Erlang
Numbers = lists:seq(1, 5).
EvenNumbers = lists:filter(fun (X) -> X rem 2 == 0 end, Numbers).
Or using a list comprehension:
EvenNumbers = [X || X <- Numbers, X rem 2 == 0].
Euphoria
sequence s, evens
s = {1, 2, 3, 4, 5, 6}
evens = {}
for i = 1 to length(s) do
if remainder(s[i], 2) = 0 then
evens = append(evens, s[i])
end if
end for
? evens
- Output:
{2,4,6}
F#
let lst = [1;2;3;4;5;6]
List.filter (fun x -> x % 2 = 0) lst;;
val it : int list = [2; 4; 6]
Factor
This code uses filter on an array.
10 <iota> >array [ even? ] filter .
! prints { 0 2 4 6 8 }
10 <iota> is already a sequence, so we can skip the conversion to array.
10 <iota> [ even? ] filter .
! prints V{ 0 2 4 5 8 }
Destructive
This uses filter! to modify the original vector.
USE: vectors
10 <iota> >vector [ even? ] filter! .
! prints V{ 0 2 4 5 8 }
To prove that filter! is destructive but filter is non-destructive, I assign the original vector to v.
USE: locals
10 <iota> >vector [| v |
v [ even? ] filter drop
v pprint " after filter" print
v [ even? ] filter! drop
v pprint " after filter!" print
] call
! V{ 0 1 2 3 4 5 6 7 8 9 } after filter
! V{ 0 2 4 6 8 } after filter!
Fantom
class Main
{
Void main ()
{
items := [1, 2, 3, 4, 5, 6, 7, 8]
// create a new list with just the even numbers
evens := items.findAll |i| { i.isEven }
// display the result
echo (evens.join(","))
}
}
Forth
: sel ( dest 0 test src len -- dest len )
cells over + swap do ( dest len test )
i @ over execute if
i @ 2over cells + !
>r 1+ r>
then
cell +loop drop ;
create nums 1 , 2 , 3 , 4 , 5 , 6 ,
create evens 6 cells allot
: .array 0 ?do dup i cells + @ . loop drop ;
: even? ( n -- ? ) 1 and 0= ;
evens 0 ' even? nums 6 sel .array \ 2 4 6
Fortran
module funcs
implicit none
contains
pure function iseven(x)
logical :: iseven
integer, intent(in) :: x
iseven = mod(x, 2) == 0
end function iseven
end module funcs
program Filter
use funcs
implicit none
integer, parameter :: N = 100
integer, dimension(N) :: array
integer, dimension(:), pointer :: filtered
integer :: i
forall(i=1:N) array(i) = i
filtered => filterwith(array, iseven)
print *, filtered
contains
function filterwith(ar, testfunc)
integer, dimension(:), pointer :: filterwith
integer, dimension(:), intent(in) :: ar
interface
elemental function testfunc(x)
logical :: testfunc
integer, intent(in) :: x
end function testfunc
end interface
integer :: i, j, n
n = count( testfunc(ar) )
allocate( filterwith(n) )
j = 1
do i = lbound(ar, dim=1), ubound(ar, dim=1)
if ( testfunc(ar(i)) ) then
filterwith(j) = ar(i)
j = j + 1
end if
end do
end function filterwith
end program Filter
FreeBASIC
' FB 1.05.0 Win64
Type FilterType As Function(As Integer) As Boolean
Function isEven(n As Integer) As Boolean
Return n Mod 2 = 0
End Function
Sub filterArray(a() As Integer, b() As Integer, filter As FilterType)
If UBound(a) = -1 Then Return '' empty array
Dim count As Integer = 0
Redim b(0 To UBound(a) - LBound(a))
For i As Integer = LBound(a) To UBound(a)
If filter(a(i)) Then
b(count) = a(i)
count += 1
End If
Next
If count > 0 Then Redim Preserve b(0 To count - 1) '' trim excess elements
End Sub
' Note that da() must be a dynamic array as static arrays can't be redimensioned
Sub filterDestructArray(da() As Integer, filter As FilterType)
If UBound(da) = -1 Then Return '' empty array
Dim count As Integer = 0
For i As Integer = LBound(da) To UBound(da)
If i > UBound(da) - count Then Exit For
If Not filter(da(i)) Then '' remove this element by moving those still to be examined down one
For j As Integer = i + 1 To UBound(da) - count
da(j - 1) = da(j)
Next j
count += 1
i -= 1
End If
Next i
If count > 0 Then
Redim Preserve da(LBound(da) To UBound(da) - count) '' trim excess elements
End If
End Sub
Dim n As Integer = 12
Dim a(1 To n) As Integer '' creates dynamic array as upper bound is a variable
For i As Integer = 1 To n : Read a(i) : Next
Dim b() As Integer '' array to store results
filterArray a(), b(), @isEven
Print "The even numbers are (in new array) : ";
For i As Integer = LBound(b) To UBound(b)
Print b(i); " ";
Next
Print : Print
filterDestructArray a(), @isEven
Print "The even numbers are (in original array) : ";
For i As Integer = LBound(a) To UBound(a)
Print a(i); " ";
Next
Print : Print
Print "Press any key to quit"
Sleep
End
Data 1, 2, 3, 7, 8, 10, 11, 16, 19, 21, 22, 27
- Output:
The even numbers are (in new array) : 2 8 10 16 22 The even numbers are (in original array) : 2 8 10 16 22
Frink
b = array[1 to 100]
c = select[b, {|x| x mod 2 == 0}]
Futhark
fun main(as: []int): []int =
filter (fn x => x%2 == 0) as
Gambas
Click this link to run this code
sRandom As New String[]
'______________________________________________________________________________________________________
Public Sub Main()
Dim siCount As Short
For siCount = 0 To 19
sRandom.Add(Rand(1, 100))
Next
Print sRandom.join(",")
NewArray
Destructive
End
'______________________________________________________________________________________________________
Public Sub NewArray() 'Select certain elements from an array into a new array in a generic way
Dim sEven As New String[]
Dim siCount As Short
For siCount = 0 To sRandom.Max
If Even(sRandom[siCount]) Then sEven.Add(sRandom[siCount])
Next
Print sEven.join(",")
End
'______________________________________________________________________________________________________
Public Sub Destructive() 'Give a second solution which filters destructively
Dim siIndex As New Short[]
Dim siCount As Short
For siCount = 0 To sRandom.Max
If Odd(sRandom[siCount]) Then siIndex.Add(siCount)
Next
For siCount = siIndex.max DownTo 0
sRandom.Extract(siIndex[siCount], 1)
Next
Print sRandom.join(",")
End
Output:
36,13,21,37,68,6,47,4,53,80,90,95,60,29,76,39,6,93,83,91 36,68,6,4,80,90,60,76,6 36,68,6,4,80,90,60,76,6
GAP
# Built-in
Filtered([1 .. 100], IsPrime);
# [ 2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97 ]
Filtered([1 .. 10], IsEvenInt);
# [ 2, 4, 6, 8, 10 ]
Filtered([1 .. 10], IsOddInt);
# [ 1, 3, 5, 7, 9 ]
Go
package main
import (
"fmt"
"math/rand"
)
func main() {
a := rand.Perm(20)
fmt.Println(a) // show array to filter
fmt.Println(even(a)) // show result of non-destructive filter
fmt.Println(a) // show that original array is unchanged
reduceToEven(&a) // destructive filter
fmt.Println(a) // show that a is now changed
// a is not only changed, it is changed in place. length and capacity
// show that it still has its original allocated capacity but has now
// been reduced in length.
fmt.Println("a len:", len(a), "cap:", cap(a))
}
func even(a []int) (r []int) {
for _, e := range a {
if e%2 == 0 {
r = append(r, e)
}
}
return
}
func reduceToEven(pa *[]int) {
a := *pa
var last int
for _, e := range a {
if e%2 == 0 {
a[last] = e
last++
}
}
*pa = a[:last]
}
- Output:
[15 1 7 3 4 8 19 0 17 18 14 5 16 9 13 11 12 10 2 6] [4 8 0 18 14 16 12 10 2 6] [15 1 7 3 4 8 19 0 17 18 14 5 16 9 13 11 12 10 2 6] [4 8 0 18 14 16 12 10 2 6] a len: 10 cap: 20
Groovy
def evens = [1, 2, 3, 4, 5].findAll{it % 2 == 0}
Haskell
In Haskell, a list is often more basic than an array:
ary = [1..10]
evens = [x | x <- ary, even x]
or
evens = filter even ary
To do the same operation on an array, the simplest way it to convert it lazily into a list:
import Data.Array
ary = listArray (1,10) [1..10]
evens = listArray (1,n) l where
n = length l
l = [x | x <- elems ary, even x]
Note that the bounds must be known before creating the array, so the temporary list will be fully evaluated before the array is created.
Icon and Unicon
IDL
The where() function can select elements on any logical expression. For example
result = array[where(NOT array AND 1)]
J
Solution:
With any verb (function) f
that returns a boolean for each element of a vector v
, the following is the generic solution:
(#~ f) v
Examples:
] v=: 20 ?@$ 100 NB. vector of 20 random integers between 0 and 99
63 92 51 92 39 15 43 89 36 69 40 16 23 2 29 91 57 43 55 22
v #~ -.2| v
92 92 36 40 16 2 22
Or using the generic form suggested above:
isEven=: 0 = 2&| NB. verb testing for even numbers
(#~ isEven) v
92 92 36 40 16 2 22
We might decide that we use this pattern so often that it is worthwhile creating a new adverb select
that filters an array using the verb to its left.
select=: adverb def '(#~ u)'
isPrime=: 1&p:
isEven select v
92 92 36 40 16 2 22
isPrime select v
43 89 23 2 29 43
(isEven *. isPrime) select v
2
Destructive example:
v=: isEven select v
(That said, note that in a highly parallel computing environment the destruction either happens after the filtering or you have to repeatedly stall the filtering to ensure that some sort of partially filtered result has coherency.)
Java
int[] array = {1, 2, 3, 4, 5 };
List<Integer> evensList = new ArrayList<Integer>();
for (int i: array) {
if (i % 2 == 0) evensList.add(i);
}
int[] evens = evensList.toArray(new int[0]);
A Java 8 solution with stream and generic types:
public static <T> T[] filter(T[] input, Predicate<T> filterMethod) {
return Arrays.stream(input)
.filter(filterMethod)
.toArray(size -> (T[]) Array.newInstance(input.getClass().getComponentType(), size));
}
Methodcall:
Integer[] array = {1, 2, 3, 4, 5};
Integer[] result = filter(array, i -> (i % 2) == 0);
Warning: This solution works not with primitive types!
For arrays with a primitive type use the wrapper class.
JavaFX Script
def array = [1..100];
def evens = array[n | n mod 2 == 0];
JavaScript
ES5
The standard way is to use the Array.prototype.filter function (
):
var arr = [1,2,3,4,5];
var evens = arr.filter(function(a) {return a % 2 == 0});
Other ways:
var arr = [1,2,3,4,5];
var evens = [];
for (var i=0, ilen=arr.length; i<ilen; i++)
if (arr[i] % 2 == 0)
evens.push(arr[i]);
var numbers = [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
var evens = [i for (i in numbers) if (i % 2 == 0)];
function range(limit) {
for(var i = 0; i < limit; i++) {
yield i;
}
}
var evens2 = [i for (i in range(100)) if (i % 2 == 0)];
Functional.select("+1&1", [1,2,3,4]) // [2, 4]
ES6
(() => {
'use strict';
// isEven :: Int -> Bool
const isEven = n => n % 2 === 0;
// TEST
return [1,2,3,4,5,6,7,8,9]
.filter(isEven);
// [2, 4, 6, 8]
})();
- Output:
[2, 4, 6, 8]
jq
jq's "select" filter is designed to make it easy to filter both arrays and streams:
(1,2,3,4,5,6,7,8,9) | select(. % 2 == 0)
- Output:
2 4 6 8
[range(1;10)] | map( select(. % 2 == 0) )
- Output:
[2,4,6,8]
Julia
@show filter(iseven, 1:10)
- Output:
filter(iseven, 1:10) = [2, 4, 6, 8, 10]
K
/ even is a boolean function
even:{0=x!2}
even 1 2 3 4 5
0 1 0 1 0
/ filtering the even numbers
a@&even'a:1+!10
2 4 6 8 10
/ as a function
evens:{x@&even'x}
a:10?100
45 5 79 77 44 15 83 88 33 99
evens a
44 88
Alternative syntax:
{x[&0=x!2]}
{x[&even x]}
Destructive:
a:evens a
44 88
Kotlin
// version 1.0.5-2
fun main(args: Array<String>) {
val array = arrayOf(1, 2, 3, 4, 5, 6, 7, 8, 9)
println(array.joinToString(" "))
val filteredArray = array.filter{ it % 2 == 0 }
println(filteredArray.joinToString(" "))
val mutableList = array.toMutableList()
mutableList.retainAll { it % 2 == 0 }
println(mutableList.joinToString(" "))
}
- Output:
1 2 3 4 5 6 7 8 9 2 4 6 8 2 4 6 8
Lambdatalk
{def filter
{lambda {:bool :a}
{if {S.empty? {S.rest :a}}
then {:bool {S.first :a}}
else {:bool {S.first :a}}
{filter :bool {S.rest :a}}}}}
{def even? {lambda {:w} {if {= {% :w 2} 0} then :w else}}}
{def odd? {lambda {:w} {if {= {% :w 2} 1} then :w else}}}
{filter even? {S.serie 1 20}}
-> 2 4 6 8 10 12 14 16 18 20
{filter odd? {S.serie 1 20}}
-> 1 3 5 7 9 11 13 15 17 19
Lang5
: filter over swap execute select ;
10 iota "2 % not" filter . "\n" .
# [ 0 2 4 6 8 ]
langur
Using the filter() function filters by a function and returns an array of values.
val .arr = series 7
writeln " array: ", .arr
writeln "filtered: ", filter f .x div 2, .arr
- Output:
array: [1, 2, 3, 4, 5, 6, 7] filtered: [2, 4, 6]
Lasso
local(original = array(1,2,3,4,5,6,7,8,9,10))
local(evens = (with item in #original where #item % 2 == 0 select #item) -> asstaticarray)
#evens
staticarray(2, 4, 6, 8, 10)
Modifying the original array
local(original = array(1,2,3,4,5,6,7,8,9,10))
with item in #original where #item % 2 != 0 do #original ->removeall(#item)
#original
array(2, 4, 6, 8, 10)
Liberty BASIC
' write random nos between 1 and 100
' to array1 counting matches as we go
dim array1(100)
count=100
for i = 1 to 100
array1(i) = int(rnd(0)*100)+1
count=count-(array1(i) mod 2)
next
'dim the extract and fill it
dim array2(count)
for i = 1 to 100
if not(array1(i) mod 2) then
n=n+1
array2(n)=array1(i)
end if
next
for n=1 to count
print array2(n)
next
Lisaac
+ a, b : ARRAY[INTEGER];
a := ARRAY[INTEGER].create_with_capacity 10 lower 0;
b := ARRAY[INTEGER].create_with_capacity 10 lower 0;
1.to 10 do { i : INTEGER;
a.add_last i;
};
a.foreach { item : INTEGER;
(item % 2 = 0).if {
b.add_last item;
};
};
Logo
to even? :n
output equal? 0 modulo :n 2
end
show filter "even? [1 2 3 4] ; [2 4]
show filter [equal? 0 modulo ? 2] [1 2 3 4]
Lua
function filter(t, func)
local ret = {}
for i, v in ipairs(t) do
ret[#ret+1] = func(v) and v or nil
end
return ret
end
function even(a) return a % 2 == 0 end
print(unpack(filter({1, 2, 3, 4 ,5, 6, 7, 8, 9, 10}, even)))
The destructive version is even simpler, since tables are passed by reference:
function filter(t, func)
for i, v in ipairs(t) do
if not func(v) then table.remove(t, i) end
end
end
function even(a) return a % 2 == 0 end
local values = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}
filter(values, even)
print(unpack(values))
M2000 Interpreter
Using Filter for arrays
Module Checkit {
Print (1,2,3,4,5,6,7,8)#filter(lambda ->number mod 2=0)
}
Checkit
Old style
Function GetEvenNumbers can get pointer to array or array and return a pointer to array.
Module Filter2EvenNumbers get an array by reference and first place numbers to stack and then make stack an array and then copy to array.
Module Filter2EvenNumbers change definition and now place numbers in A() and at the last statement A() change dimension, preserving values.
We can use Base 1 arrays too: Dim Base 1, A(5) : A(1)=10,3,6,7,11
Module CheckIt {
Function GetEvenNumbers (A as array){
If len(A)=0 then =(,) : exit
Flush ' empty current stack (of values)
n=each(A)
While n {
if array(n) mod 2 = 0 then data array(n)
}
\\ [] return a stack object, leave an empty stack as current stack
=Array([])
}
Dim A(5), B()
A(0)=10,3,6,7,11
B()=GetEvenNumbers(A())
Print B() ' print 10,6
Print GetEvenNumbers((1,2,3,4,5,6,7,8)) ' 2 4 6 8
Module Filter2EvenNumbers (&A()) {
If len(A())=0 then exit
Stack New {
Flush ' empty current stack (of values)
n=each(A())
While n {
if array(n) mod 2 = 0 then data array(n)
}
\\ [] return a stack object, leave an empty stack as current stack
A()=Array([])
}
}
A(0)=10,3,6,7,11
Filter2EvenNumbers &A()
Print A() ' 10 6
Module Filter2EvenNumbers (&A()) {
If len(A())=0 then exit
n=each(A())
x=Dimension(A(), 0)-1 ' base of array (0 or 1)
k=-x
While n {
if array(n) mod 2 = 0 then x++ : A(x)=Array(n)
}
Dim A(x+k)
}
Dim A(5)
A(0)=10,3,6,7,11
Filter2EvenNumbers &A()
Print A() ' 10 6
}
CheckIt
}
CheckIt
Maple
evennum:=proc(nums::list(integer))
return select(x->type(x, even), nums);
end proc;
Mathematica / Wolfram Language
Check for even integers:
Select[{4, 5, Pi, 2, 1.3, 7, 6, 8.0}, EvenQ]
gives:
{4, 2, 6}
To check also for approximate number (like 8.0 in the example above) a possible solution is:
Select[{4, 5, Pi, 2, 1.3, 7, 6, 8.0}, Mod[#, 2] == 0 &]
gives:
{4, 2, 6, 8.}
notice that the function returns 8. not 8 (the dot indicates that it is a float number, not an integer).
MATLAB
function evens = selectEvenNumbers(list)
evens = list( mod(list,2) == 0 );
end
- Output:
>> selectEvenNumbers([0 1 2 3 4 5 6 7 8 9 10])
ans =
0 2 4 6 8 10
Maxima
a: makelist(i, i, 1, 20);
[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20]
sublist(a, evenp);
[2, 4, 6, 8, 10, 12, 14, 16, 18, 20]
sublist(a, lambda([n], mod(n, 3) = 0));
[3, 6, 9, 12, 15, 18]
MAXScript
arr = #(1, 2, 3, 4, 5, 6, 7, 8, 9)
newArr = for i in arr where (mod i 2 == 0) collect i
min
(1 2 3 4 5 6 7 8 9 10) 'even? filter print
- Output:
(2 4 6 8 10)
MiniScript
We define a filter method on the list type that returns a new list containing elements filtered by the given function.
list.filter = function(f)
result = []
for item in self
if f(item) then result.push item
end for
return result
end function
isEven = function(x)
return x % 2 == 0
end function
nums = [1, 2, 3, 4, 5, 6, 7, 9, 12, 15, 18, 21]
print nums.filter(@isEven)
The in-place version is simpler, and even allows the use of an unnamed filter function, defined right on the method call.
list.filterInPlace = function(f)
for i in range(self.len-1, 0)
if not f(self[i]) then self.remove i
end for
end function
nums = [1, 2, 3, 4, 5, 6, 7, 9, 12, 15, 18, 21]
nums.filterInPlace function(x)
return x % 2 == 0
end function
print nums
ML
Standard ML
val ary = [1,2,3,4,5,6];
List.filter (fn x => x mod 2 = 0) ary
MLite
MLite is similar to Standard ML, though '=>' becomes '=' and 'List.' is elided:
val ary = [1,2,3,4,5,6];
filter (fn x = x mod 2 = 0) ary;
MUMPS
FILTERARRAY
;NEW I,J,A,B - Not making new, so we can show the values
;Populate array A
FOR I=1:1:10 SET A(I)=I
;Move even numbers into B
SET J=0 FOR I=1:1:10 SET:A(I)#2=0 B($INCREMENT(J))=A(I)
QUIT
Testing:
WRITE A(1)=1 A(2)=2 A(3)=3 A(4)=4 A(5)=5 A(6)=6 A(7)=7 A(8)=8 A(9)=9 A(10)=10 B(1)=2 B(2)=4 B(3)=6 B(4)=8 B(5)=10 I=10 J=5
Nemerle
Lists have a built-in method for filtering:
def original = $[1 .. 100];
def filtered = original.Filter(fun(n) {n % 2 == 0});
WriteLine($"$filtered");
The following would work for arrays:
Filter[T] (a : array[T], f : T -> bool) : array[T]
{
def b = $[x | x in a, (f(x))];
b.ToArray()
}
NetRexx
/* NetRexx */
options replace format comments java crossref symbols nobinary
numeric digits 5000
-- =============================================================================
class RFilter public
properties indirect
filter = RFilter.ArrayFilter
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
method main(args = String[]) public static
arg = Rexx(args)
RFilter().runSample(arg)
return
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
method runSample(arg) public
sd1 = Rexx[]
sd2 = Rexx[]
say 'Test data:'
sd1 = makeSampleData(100)
display(sd1)
setFilter(RFilter.EvenNumberOnlyArrayFilter())
say
say 'Option 1 (copy to a new array):'
sd2 = getFilter().filter(sd1)
display(sd2)
say
say 'Option 2 (replace the original array):'
sd1 = getFilter().filter(sd1)
display(sd1)
return
-- ---------------------------------------------------------------------------
method display(sd = Rexx[]) public static
say '-'.copies(80)
loop i_ = 0 to sd.length - 1
say sd[i_] '\-'
end i_
say
return
-- ---------------------------------------------------------------------------
method makeSampleData(size) public static returns Rexx[]
sd = Rexx[size]
loop e_ = 0 to size - 1
sd[e_] = (e_ + 1 - size / 2) / 2
end e_
return sd
-- =============================================================================
class RFilter.ArrayFilter abstract
-- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
method filter(array = Rexx[]) public abstract returns Rexx[]
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
class RFilter.EvenNumberOnlyArrayFilter extends RFilter.ArrayFilter
-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
method filter(array = Rexx[]) public returns Rexx[]
clist = ArrayList(Arrays.asList(array))
li = clist.listIterator()
loop while li.hasNext()
e_ = Rexx li.next
if \e_.datatype('w'), e_ // 2 \= 0 then li.remove()
end
ry = Rexx[] clist.toArray(Rexx[clist.size()])
return ry
- Output:
Test data: -------------------------------------------------------------------------------- -24.5 -24 -23.5 -23 -22.5 -22 -21.5 -21 -20.5 -20 -19.5 -19 -18.5 -18 -17.5 -17 -16.5 -16 -15.5 -15 -14.5 -14 -13.5 -13 -12.5 -12 -11.5 -11 -10.5 -10 -9.5 -9 -8.5 -8 -7.5 -7 -6.5 -6 -5.5 -5 -4.5 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5 18 18.5 19 19.5 20 20.5 21 21.5 22 22.5 23 23.5 24 24.5 25 Option 1 (copy to a new array): -------------------------------------------------------------------------------- -24 -22 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 24 Option 2 (replace the original array): -------------------------------------------------------------------------------- -24 -22 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 24
NewLISP
> (filter (fn (x) (= (% x 2) 0)) '(1 2 3 4 5 6 7 8 9 10))
(2 4 6 8 10)
NGS
F even(x:Int) x % 2 == 0
evens = Arr(1...10).filter(even)
Nial
filter (= [0 first, mod [first, 2 first] ] ) 0 1 2 3 4 5 6 7 8 9 10
=0 2 4 6 8 10
Nim
import sequtils
let values = toSeq(0..9)
# Filtering by returning a new sequence.
# - using an explicit filtering procedure.
echo "Even values: ", values.filter(proc(x: int): bool = x mod 2 == 0)
# - using a predicate.
echo "Odd values: ", values.filterIt(it mod 2 == 1)
# Filtering by modifying the sequence.
# - using an explicit filtering procedure.
var v1 = toSeq(0..9)
v1.keepIf(proc(x: int): bool = x mod 2 == 0)
echo "Even values: ", v1
# - using a predicate.
var v2 = toSeq(0..9)
v2.keepItIf(it mod 2 != 0)
echo "Odd values: ", v2
- Output:
Even values: @[0, 2, 4, 6, 8] Odd values: @[1, 3, 5, 7, 9] Even values: @[0, 2, 4, 6, 8] Odd values: @[1, 3, 5, 7, 9]
Objeck
use Structure;
bundle Default {
class Evens {
function : Main(args : String[]) ~ Nil {
values := IntVector->New([1, 2, 3, 4, 5]);
f := Filter(Int) ~ Bool;
evens := values->Filter(f);
each(i : evens) {
evens->Get(i)->PrintLine();
};
}
function : Filter(v : Int) ~ Bool {
return v % 2 = 0;
}
}
}
Objective-C
NSArray *numbers = [NSArray arrayWithObjects:[NSNumber numberWithInt:1],
[NSNumber numberWithInt:2],
[NSNumber numberWithInt:3],
[NSNumber numberWithInt:4],
[NSNumber numberWithInt:5], nil];
NSArray *evens = [numbers objectsAtIndexes:[numbers indexesOfObjectsPassingTest:
^BOOL(id obj, NSUInteger idx, BOOL *stop) { return [obj intValue] % 2 == 0; } ]];
NSArray *numbers = [NSArray arrayWithObjects:[NSNumber numberWithInt:1],
[NSNumber numberWithInt:2],
[NSNumber numberWithInt:3],
[NSNumber numberWithInt:4],
[NSNumber numberWithInt:5], nil];
NSPredicate *isEven = [NSPredicate predicateWithFormat:@"modulus:by:(SELF, 2) == 0"];
NSArray *evens = [numbers filteredArrayUsingPredicate:isEven];
#import <Foundation/Foundation.h>
@interface NSNumber ( ExtFunc )
-(int) modulo2;
@end
@implementation NSNumber ( ExtFunc )
-(int) modulo2
{
return [self intValue] % 2;
}
@end
int main()
{
NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init];
NSArray *numbers = [NSArray arrayWithObjects:[NSNumber numberWithInt:1],
[NSNumber numberWithInt:2],
[NSNumber numberWithInt:3],
[NSNumber numberWithInt:4],
[NSNumber numberWithInt:5], nil];
NSPredicate *isEven = [NSPredicate predicateWithFormat:@"modulo2 == 0"];
NSArray *evens = [numbers filteredArrayUsingPredicate:isEven];
NSLog(@"%@", evens);
[pool release];
return 0;
}
OCaml
It is easier to do it with a list:
let lst = [1;2;3;4;5;6]
let even_lst = List.filter (fun x -> x mod 2 = 0) lst
Octave
arr = [1:100];
evennums = arr( mod(arr, 2) == 0 );
disp(evennums);
Oforth
100 seq filter(#isEven)
Ol
(filter even? '(1 2 3 4 5 6 7 8 9 10))
ooRexx
Call random ,,1234567
a=.array~new
b=.array~new
Do i=1 To 10
a[i]=random(1,9999)
End
Say 'Unfiltered values:' a~makestring(line,' ')
/* copy even numbers to array b */
j=0
Do i=1 to 10
If filter(a[i]) Then Do
j = j + 1
b[j]=a[i]
End
end
Say 'Filtered values (in second array): ' b~makestring(line,' ')
/* destructive filtering: copy within array a */
j=0
Do i=1 to 10
If filter(a[i]) Then Do
j = j + 1
a[j]=a[i]
End
end
/* destructive filtering: delete the remaining elements */
Do i=10 To j+1 By -1
a~delete(i)
End
Say 'Filtered values (destructive filtering):' a~makestring(line,' ')
Exit
filter: Return arg(1)//2=0
- Output:
Unfiltered values: 1412 2244 6778 4002 439 3335 5877 8273 7882 1469 Filtered values (in second array): 1412 2244 6778 4002 7882 Filtered values (destructive filtering): 1412 2244 6778 4002 7882
Oz
It is easier to do it with a list:
declare
Lst = [1 2 3 4 5]
LstEven = {Filter Lst IsEven}
PARI/GP
- This code uses the select() function, which was added in PARI version 2.4.2. The order of the arguments changed between versions; to use in 2.4.2 change
select(function, vector)
toselect(vector, function)
.
iseven(n)=n%2==0
select(iseven, [2, 3, 4, 5, 7, 8, 9, 11, 13, 16, 17])
Or in anonymous form
select(n -> n%2==0, [2, 3, 4, 5, 7, 8, 9, 11, 13, 16, 17])
Pascal
Arrays are supported in all versions of pascal so this simple example will cover the entire gamut.
const
numbers:array[0..9] of integer = (0,1,2,3,4,5,6,7,8,9);
for x = 1 to 10 do
if odd(numbers[x]) then
writeln( 'The number ',numbers[x],' is odd.');
else
writeln( 'The number ',numbers[x],' is even.');
The odd() function is a standard library function of pascal as is the function even().
Peloton
Fixed length English dialect
<@ LETCNWLSTLIT>numbers|1 2 3 4 5 6 7 8 9 10 11 12</@>
<@ DEFLST>evens</@>
<@ ENULSTLIT>numbers|
<@ TSTEVEELTLST>...</@>
<@ IFF>
<@ LETLSTELTLST>evens|...</@>
</@>
</@>
Perl
my @a = (1, 2, 3, 4, 5, 6);
my @even = grep { $_%2 == 0 } @a;
Phix
basic task
function even(integer i) return remainder(i,2)=0 end function ?filter(tagset(10),even)
- Output:
{2,4,6,8,10}
extra credit
The following discusses possible destructive/in situ behaviours (in excruciatingly painstaking detail). Phix is reference counted so the distinction between destructive and non-destructive is somewhat subtle. The following code (builtin filter routine) acts both ways.
function even(integer i) return remainder(i,2)=0 end function
procedure main() sequence s = tagset(10), t = filter(s,even) -- copy-on-write here... ?s -- still all 10 ?t -- 5 s = filter(s,even) -- ...but automatic pass by reference occurs here ?s -- 5 end procedure main()
- Output:
{1,2,3,4,5,6,7,8,9,10} {2,4,6,8,10} {2,4,6,8,10}
It will help to explain what is going on by looking at a couple of longhand (and greatly simplified) versions, first an explicitly non-destructive one
function lhnd_filter(sequence a, integer fn) sequence res = {} for i=1 to length(a) do if fn(a[i]) then res = append(res,a[i]) end if end for return res end function
Clearly the above is non-destructive. It makes no attempt to modify a, but builds a new result, and it is fair to say that in some cases the above may be the fastest approach due to fewer reference count updates. However the following may or may not be destructive:
function lhd_filter(sequence a, integer fn) integer l = 0 for i=1 to length(a) do if fn(a[i]) then l += 1 a[l] = a[i] end if end for a = a[1..l] -- (can occur in situ) return a end function
procedure main() sequence s = tagset(10), t = lhd_filter(s,even) -- copy on write here... ?s -- still all 10 ?t -- 5 s = lhd_filter(s,even) -- ...but automatic pass by reference occurs here ?s -- 5 end procedure main()
In the t = lhd_filter(s) call, s is preserved because of copy-on-write semantics. Modifying a does not modify s, because it has a reference count of 2 the first attempt to modify it triggers copy-on-write and safely makes a top-level copy. In the s = lhd_filter(s) call however, s is automatically passed by reference, ie the local s is <no value> over the duration of the call and parameter a of lhd_filter() contains the only reference to the previous content of s, and no copy-on-write occurs. Technically modifying a is still not modifying s, but since it has a reference count of 1 it modifies the data that used to be referenced by s, and will again rsn, in situ. Note: adding t = s before the s = lhd_filter(s) call would make it non-destructive again, as t must be preserved and there is now a reference count >1 on that data. Also note that automatic pass-by-reference only occurs for routine-local variables.
There is one case in the interpreter (pEmit2.e/rebuild_callback()) where it needs to circumvent this behaviour. For performance reasons it does not populate the symbol table with actual names until a fatal error or trace event occurs. At that time, the symbol table may have a reference count>1, so it deliberately patches it to 1 over the name population call to switch off the copy-on-write semantics, and later restores the reference count before carrying on. Not that you really needed to know that.
PHL
module var;
extern printf;
@Integer main [
var arr = 1..9;
var evens = arr.filter(#(i) i % 2 == 0);
printf("%s\n", evens::str);
return 0;
]
PHP
Using a standard loop
$arr = range(1,5);
$evens = array();
foreach ($arr as $val){
if ($val % 2 == 0) $evens[] = $val);
}
print_r($evens);
Using a filter function
function is_even($var) { return(!($var & 1)); }
$arr = range(1,5);
$evens = array_filter($arr, "is_even");
print_r($evens);
Picat
List comprehension is probably the best way of filtering:
[I : I in 1..20, I mod 2 == 0]
A more general version of filtering is to use call/1
with a defined predicate (here p/1
):
go =>
L = 1..20,
A = filter(L,p).
p(N) => N mod 2 == 0.
filter(A,F) = [N : N in A, call(F,N)].
This general version might be slower since using call/1
has some overhead.
PicoLisp
(filter '((N) (not (bit? 1 N)))
(1 2 3 4 5 6 7 8 9) )
- Output:
-> (2 4 6 8)
PL/I
(subscriptrange):
filter_values: procedure options (main); /* 15 November 2013 */
declare a(20) fixed, b(*) fixed controlled;
declare (i, j, n) fixed binary;
a = random()*99999; /* fill the array with random elements from 0-99998 */
put list ('Unfiltered values:');
put skip edit (a) (f(6));
/* Loop to count the number of elements that will be filtered */
n = 0;
do i = 1 to hbound(a);
n = n + filter(a(i));
end;
allocate b(n);
j = 0;
do i = 1 to hbound(a);
if filter(a(i)) then do; j = j + 1; b(j) = a(i); end;
end;
put skip list ('Filtered values:');
put skip edit (b) (f(6));
filter: procedure (value) returns (bit(1));
declare value fixed;
return (iand(abs(value), 1) = 0);
end filter;
end filter_values;
Results:
Unfiltered values: 44270 6008 80477 17004 91587 48669 29623 74640 29841 20019 77833 59865 49647 2272 54781 36154 40114 71893 25960 76863 Filtered values: 44270 6008 17004 74640 2272 36154 40114 25960
Pop11
Most natural solution in Pop11 would probably use list. Below we accumulate filtered elements on the stack and then allocate array for the result:
;;; Generic filtering procedure which selects from ar elements
;;; satisfying pred
define filter_array(ar, pred);
lvars i, k;
stacklength() -> k;
for i from 1 to length(ar) do
;;; if element satisfies pred we leave it on the stack
if pred(ar(i)) then ar(i) endif;
endfor;
;;; Collect elements from the stack into a vector
return (consvector(stacklength() - k));
enddefine;
;;; Use it
filter_array({1, 2, 3, 4, 5},
procedure(x); not(testbit(x, 0)); endprocedure) =>
PostScript
[1 2 3 4 5 6 7 8 9 10] {2 mod 0 eq} find
PowerShell
$array = -15..37
$array | Where-Object { $_ % 2 -eq 0 }
Prolog
findall
evens(D, Es) :- findall(E, (member(E, D), E mod 2 =:= 0), Es).
Usage:
?- evens([1,2,3,4,5,6,7,8,9,10],E).
E = [2, 4, 6, 8, 10]
Anonymous functions
Works with SWI-Prolog and module(lambda) written by Ulrich Neumerkel, "lambda.pl" can be found there : http://www.complang.tuwien.ac.at/ulrich/Prolog-inedit/lambda.pl
?- use_module(library(lambda)).
true.
?- include((\X^(X mod 2 =:= 0)), [1,2,3,4,5,6,7,8,9], L).
L = [2,4,6,8].
filter and anonymous functions
Works with SWI-Prolog and module(lambda) written by Ulrich Neumerkel, "lambda.pl" can be found there : http://www.complang.tuwien.ac.at/ulrich/Prolog-inedit/lambda.pl
:- use_module(lambda).
%% filter(Pred, LstIn, LstOut)
%%
filter(_Pre, [], []).
filter(Pred, [H|T], L) :-
filter(Pred, T, L1),
( call(Pred,H) -> L = [H|L1]; L = L1).
Usage :
?- filter(\X^(X mod 2 =:= 0), [1,2,3,4,5,6,7,8,9], L).
L = [2,4,6,8] .
PureBasic
Dim Tal.i(9)
Dim Evens.i(0)
;- Set up an array with random numbers
For i=0 To ArraySize(Tal())
Tal(i)=Random(100)
Next
;- Pick out all Even and save them
j=0
For i=0 To ArraySize(Tal())
If Tal(i)%2=0
ReDim Evens(j) ; extend the Array as we find new Even's
Evens(j)=tal(i)
j+1
EndIf
Next
;- Display the result
PrintN("List of Randoms")
For i=0 To ArraySize(Tal())
Print(Str(Tal(i))+" ")
Next
PrintN(#CRLF$+#CRLF$+"List of Even(s)")
For i=0 To ArraySize(Evens())
Print(Str(Evens(i))+" ")
Next
- Output:
List of Randoms 32 35 89 91 11 33 12 22 42 43
List of Even(s) 32 12 22 42
Python
values = range(10)
evens = [x for x in values if not x & 1]
ievens = (x for x in values if not x & 1) # lazy
# alternately but less idiomatic:
evens = filter(lambda x: not x & 1, values)
Alternative using the slice syntax with its optional "stride" expression:
values = range(10)
evens = values[::2]
This works for all versions of Python (at least as far back as 1.5). Lists (arrays) can be "sliced" by indexing them with a range (lower and upper bounds). Thus mylist[1:9] evaluates into a list from the second item (excluding the first item which is mylist[0], of course) up to but not including the ninth item. In Python the expression mylist[:] is synonymous with mylist[0:len(mylist)] ... returning a copy of the complete list. also mylist[:x] returns the first x items from the list and negative numbers can be used such that mylist[-x:] returns the last x items from the list. The relatively obscure and optional stride expression can skip items and/or force the evaluation from the end of the list downward towards it's lower elements. Thus mylist[::-1] returns a reversed copy of the list, mylist[::2] returns all even elements, mylist[1::2] returns all odd elements, and so on.
Since strings in Python can be treated as a sort of immutable list of characters then the slicing and extended slicing can also be used with them as well. Thus mystring[::-2] will return every other character from the reverse order of the string.
One can also assign to a slice (of a list or other mutable indexed object. Thus the following:
values = range(10)
values[::2] = [11,13,15,17,19]
print values
11, 1, 13, 3, 15, 5, 17, 7, 19, 9
Or in functional terms, by descending generality and increasing brevity:
'''Functional filtering - by descending generality and increasing brevity'''
from functools import (reduce)
from itertools import (chain)
import inspect
import re
def f1(xs):
'''Catamorphism: fold / reduce.
See [The expressiveness and universality of fold]
(http://www.cs.nott.ac.uk/~pszgmh/fold.pdf)'''
return reduce(lambda a, x: a + [x] if even(x) else a, xs, [])
def f2(xs):
'''List monad bind/inject operator (concatMap combined with
an (a -> [b]) function which wraps its result in a
possibly empty list). This is the universal abstraction
which underlies list comprehensions.'''
return concatMap(lambda x: [x] if even(x) else [])(xs)
def f3(xs):
'''Built-in syntactic sugar for list comprehensions.
Convenient, and encouraged as 'Pythonic',
but less general and expressive than a fold.'''
return (x for x in xs if even(x))
def f4(xs):
'''Built-in filter function'''
return filter(even, xs)
def main():
'''Tests'''
xs = enumFromTo(0)(10)
print(
tabulated(showReturn)(
'By descending generality and increasing brevity:\n'
)(
lambda f: list(f(xs))
)([f1, f2, f3, f4])
)
# GENERIC -------------------------------------------------
# concatMap :: (a -> [b]) -> [a] -> [b]
def concatMap(f):
'''Concatenated list over which a function has been mapped.
The list monad can be derived by using a function of the type
(a -> [b]) which wraps its output in list
(using an empty list to represent computational failure).'''
return lambda xs: list(
chain.from_iterable(
map(f, xs)
)
)
# enumFromTo :: (Int, Int) -> [Int]
def enumFromTo(m):
'''Integer enumeration from m to n.'''
return lambda n: list(range(m, 1 + n))
# even :: Int -> Bool
def even(x):
'''Predicate'''
return 0 == x % 2
# showReturn :: (a -> b) -> String
def showReturn(f):
'''Stringification of final (return) expression in function body.'''
return re.split('return ', inspect.getsource(f))[-1].strip()
# tabulated :: (a -> String) -> String -> (a -> b) -> [a] -> String
def tabulated(fShow):
'''heading -> function -> input List -> tabulated output string'''
def go(s, f, xs):
w = max(len(fShow(x)) for x in xs)
return s + '\n' + '\n'.join([
fShow(x).rjust(w, ' ') +
' -> ' + str(f(x)) for x in xs
])
return lambda s: lambda f: lambda xs: go(s, f, xs)
if __name__ == '__main__':
main()
- Output:
By descending generality and increasing brevity: reduce(lambda a, x: a + [x] if even(x) else a, xs, []) -> [0, 2, 4, 6, 8, 10] concatMap(lambda x: [x] if even(x) else [])(xs) -> [0, 2, 4, 6, 8, 10] (x for x in xs if even(x)) -> [0, 2, 4, 6, 8, 10] filter(even, xs) -> [0, 2, 4, 6, 8, 10]
Quackery
[ [] ]'[ rot
witheach
[ tuck over do iff
[ dip [ nested join ] ]
else nip ]
drop ] is only ( [ --> [ )
[ 1 & not ] is even ( n --> b )
[] 10 times [ 10 random join ]
say "Ten arbitrary digits: " dup echo cr
say "Only the even digits: " only even echo cr
- Output:
Ten arbitrary digits: [ 1 6 1 2 2 1 8 5 5 4 ] Only the even digits: [ 6 2 2 8 4 ]
Destructively
[ ]'[ over size times
[ over i peek
over do if
[ dip [ i pluck drop ] ] ]
drop ] is without ( [ --> [ )
[ 1 & ] is odd ( n --> b )
[] 10 times [ i join ] shuffle
say "Ten shuffled digits: " dup echo cr
say "Less the odd digits: " without odd echo cr
- Output:
Ten shuffled digits: [ 5 6 8 2 1 4 0 3 9 7 ] Less the odd digits: [ 6 8 2 4 0 ]
Q
x where 0=x mod 2
R
a <- 1:100
evennums <- a[ a%%2 == 0 ]
print(evennums)
Racket
The classic way:
-> (filter even? '(0 1 2 3 4 5 6 7 8 9))
'(0 2 4 6 8)
getting the list of non-evens too:
-> (partition even? '(0 1 2 3 4 5 6 7 8 9))
'(0 2 4 6 8)
'(1 3 5 7 9)
Finally, using a for loop, similar to list comprehension:
-> (for/list ([x '(0 1 2 3 4 5 6 7 8 9)] #:when (even? x)) x)
'(0 2 4 6 8)
Raku
(formerly Perl 6)
my @a = 1..6;
my @even = grep * %% 2, @a;
Alternatively:
my @a = 1..6;
my @even = @a.grep(* %% 2);
Destructive:
my @a = 1..6;
@a .= grep(* %% 2);
Raven
[ 0 1 2 3 4 5 6 7 8 9 ] as nums
group nums each
dup 1 & if drop
list as evens
REBOL
a: [] repeat i 100 [append a i] ; Build and load array.
evens: [] repeat element a [if even? element [append evens element]]
print mold evens
- Output:
[2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 90 92 94 96 98 100]
Red
Red []
orig: [] repeat i 10 [append orig i]
?? orig
cpy: [] forall orig [if even? orig/1 [append cpy orig/1]]
;; or - because we know each second element is even :- )
;; cpy: extract next orig 2
?? cpy
remove-each ele orig [odd? ele] ;; destructive
?? orig
- Output:
orig: [1 2 3 4 5 6 7 8 9 10] cpy: [2 4 6 8 10] orig: [2 4 6 8 10] >>
REXX
using two arrays
This example uses two arrays. The random BIF is used to generate the numbers.
/*REXX program selects all even numbers from an array and puts them ──► a new array.*/
parse arg N seed . /*obtain optional arguments from the CL*/
if N=='' | N=="," then N= 50 /*Not specified? Then use the default.*/
if datatype(seed,'W') then call random ,,seed /*use the RANDOM seed for repeatability*/
old.= /*the OLD array, all are null so far. */
new.= /* " NEW " " " " " " */
do i=1 for N /*generate N random numbers ──► OLD */
old.i= random(1, 99999) /*generate random number 1 ──► 99999*/
end /*i*/
#= 0 /*number of elements in NEW (so far).*/
do j=1 for N /*process the elements of the OLD array*/
if old.j//2 \== 0 then iterate /*if element isn't even, then skip it.*/
#= # + 1 /*bump the number of NEW elements. */
new.#= old.j /*assign the number to the NEW array.*/
end /*j*/
do k=1 for # /*display all the NEW numbers. */
say right('new.'k, 20) "=" right(new.k, 9) /*display a line (an array element). */
end /*k*/ /*stick a fork in it, we're all done. */
Programming note: the REXX statement
if old.j//2 \== 0 then iterate
could've been replaced with
if old.j//2 then iterate
but that would've assumed the numbers are integers (no matter what form they're expressed in).
As it happens, the REXX program uses the numbers generated from the random BIF, which are integers.
- output when using the input of: , 1234567
The 1234567 is the random BIF seed so that the random numbers can be repeated when re-running the REXX program.
new.1 = 17520 new.2 = 77326 new.3 = 36128 new.4 = 19124 new.5 = 202 new.6 = 82314 new.7 = 96140 new.8 = 4066 new.9 = 3254 new.10 = 91178 new.11 = 18806 new.12 = 60646 new.13 = 26428 new.14 = 16790 new.15 = 24868 new.16 = 61954 new.17 = 63424 new.18 = 97538 new.19 = 82278 new.20 = 33360 new.21 = 74026 new.22 = 48472 new.23 = 44360
using one array with a control array
This version uses a control array, which isn't fully populated (in REXX terms, a sparse array.)
/*REXX program finds all even numbers from an array, and marks a control array. */
parse arg N seed . /*obtain optional arguments from the CL*/
if N=='' | N=="," then N= 50 /*Not specified? Then use the default.*/
if datatype(seed,'W') then call random ,,seed /*use the RANDOM seed for repeatability*/
do i=1 for N /*generate N random numbers ──► OLD */
@.i= random(1, 99999) /*generate random number 1 ──► 99999*/
end /*i*/
!.= 0 /*number of elements in NEW (so far).*/
do j=1 for N /*process the OLD array elements. */
if @.j//2 \==0 then !.j= 1 /*mark the ! array that it's ¬even. */
end /*j*/
do k=1 for N /*display all the @ even numbers. */
if !.k then iterate /*if it's marked as not even, skip it.*/
say right('array.'k, 20) "=" right(@.k, 9) /*display a even number, filtered array*/
end /*k*/ /*stick a fork in it, we're all done. */
For the following input: , 1234567
- output Output is the same as the 1st REXX version (using two arrays).
using one array, destructive
This version just uses one array to perform the filtering instead of creating a new array.
This method doesn't need as much memory to hold the sparse array.
/*REXX program finds all even numbers from an array, and marks the not even numbers.*/
parse arg N seed . /*obtain optional arguments from the CL*/
if N=='' | N=="," then N= 50 /*Not specified? Then use the default.*/
if datatype(seed,'W') then call random ,,seed /*use the RANDOM seed for repeatability*/
do i=1 for N /*generate N random numbers ──► OLD */
@.i= random(1, 99999) /*generate a random number 1 ──► 99999 */
end /*i*/
do j=1 for N /*process the OLD array elements. */
if @.j//2 \==0 then @.j= /*mark the @ array that it's not even*/
end /*j*/
do k=1 for N /*display all the @ even numbers. */
if @.k=='' then iterate /*if it's marked not even, then skip it*/
say right('array.'k, 20) "=" right(@.k, 9) /*display a line (an array element). */
end /*k*/ /*stick a fork in it, we're all done. */
For the following input: , 1234567
- output is the same as the 1st REXX version (using two arrays).
Ring
aList = [1, 2, 3, 4, 5, 6]
bArray = list(3)
see evenSelect(aList)
func evenSelect aArray
i = 0
for n = 1 to len(aArray)
if (aArray[n] % 2) = 0
i = i + 1
bArray[i] = aArray[n] ok
next
return bArray
Ruby
Enumerable#select is the filter that returns a new Array.
# Enumerable#select returns a new array.
ary = [1, 2, 3, 4, 5, 6]
even_ary = ary.select {|elem| elem.even?}
p even_ary # => [2, 4, 6]
# Enumerable#select also works with Range.
range = 1..6
even_ary = range.select {|elem| elem.even?}
p even_ary # => [2, 4, 6]
Destructive
Array#select! is the destructive version which modifies the original Array.
ary = [1, 2, 3, 4, 5, 6]
ary.select! {|elem| elem.even?}
p ary # => [2, 4, 6]
Shorthand:
ary = [1, 2, 3, 4, 5, 6]
ary.select!(&:even?)
p ary # => [2, 4, 6]
Run BASIC
dim a1(100)
count = 100
for i = 1 to 100
a1(i) = int(rnd(0)*100)+1
count = count - (a1(i) mod 2)
next
'dim the extract and fill it
dim a2(count)
for i = 1 to 100
if not(a1(i) mod 2) then
n = n+1
a2(n) = a1(i)
end if
next
for i = 1 to count
print a2(i)
next
Rust
fn main() {
println!("new vec filtered: ");
let nums: Vec<i32> = (1..20).collect();
let evens: Vec<i32> = nums.iter().cloned().filter(|x| x % 2 == 0).collect();
println!("{:?}", evens);
// Filter an already existing vector
println!("original vec filtered: ");
let mut nums: Vec<i32> = (1..20).collect();
nums.retain(|x| x % 2 == 0);
println!("{:?}", nums);
}
- Output:
new vec filtered: [2, 4, 6, 8, 10, 12, 14, 16, 18] original vec filtered: [2, 4, 6, 8, 10, 12, 14, 16, 18]
Salmon
In this example, [1...10] is a list of the integers from 1 to 10. The comprehend expression walks over this list and selects only the even elements. The result of the comprehend expression is a new list with only the even elements. Then an iterate statement is used to walk over the list of even elements and print them out.
iterate(x; comprehend(y; [1...10]; y % 2 == 0) (y))
x!;
Here's a version that walks an array destructively removing the non-even elements:
variable my_array := [1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
variable write_position := 0;
iterate (read_position; [0...9])
{
immutable elem := my_array[read_position];
if (elem % 2 == 0)
{
my_array[write_position] := elem;
++write_position;
};
};
// Chop off the end of the array.
my_array := my_array[0...write_position - 1];
iterate(x; my_array)
x!;
Sather
class MARRAY{T} < $ARR{T} is
include ARRAY{T};
filter_by(r:ROUT{T}:BOOL):SAME is
o:MARRAY{T} := #;
loop e ::= elt!;
if r.call(e) then
o := o.append(#MARRAY{T}(|e|));
end;
end;
return o;
end;
end;
class MAIN is
main is
a ::= #MARRAY{INT}(|5, 6, 7, 8, 9, 10, 11|);
sel ::= a.filter_by( bind(_.is_even) );
loop #OUT + sel.elt! + " "; end;
#OUT + "\n";
end;
end;
Scala
(1 to 100).filter(_ % 2 == 0)
Scheme
Filter function definition:
(define filter
(lambda (fn lst)
(let iter ((lst lst) (result '()))
(if (null? lst)
(reverse result)
(let ((item (car lst))
(rest (cdr lst)))
(if (fn item)
(iter rest (cons item result))
(iter rest result)))))))
Usage in the interactive prompt:
> (filter even? '(1 2 3 4 5 6 7 8 9 10))
(2 4 6 8 10)
Or as a function:
(define (select-even lst)
(filter even? lst))
(select-even '(1 2 3 4 5 6 7 8 9 10))
Seed7
var array integer: arr is [] (1, 2, 3, 4, 5);
var array integer: evens is 0 times 0;
var integer: number is 0;
for number range arr do
if not odd(number) then
evens &:= [] (number);
end if;
end for;
SequenceL
Filters are primarily written in SequenceL using partial Indexed Functions.
evens(x(1))[i] := x[i] when x[i] mod 2 = 0;
- Output:
cmd:>evens(1...5) [2,4]
Sidef
var arr = [1,2,3,4,5];
# Creates a new array
var new = arr.grep {|i| i %% 2};
say new.dump; # => [2, 4]
# Destructive (at variable level)
arr.grep! {|i| i %% 2};
say arr.dump; # => [2, 4]
Slate
#(1 2 3 4 5) select: [| :number | number isEven].
Slope
(define number-list (range 20))
(define even-number-list
(filter
(lambda (num) (equal? (% num 2) 0))
number-list))
(display number-list "\n" even-number-list "\n")
Output:
(0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19)
(0 2 4 6 8 10 12 14 16 18)
Smalltalk
Creates a new array:
#(1 2 3 4 5) select: [:number | number even]
or for short:
#(1 2 3 4 5) select:#even
Destructive modification is not possible for literal constants (these are immutable); in addition, Arrays are fix sized collections. It is also considered very bad style, to modify passed in arguments this way. Thus constructing a new Array object (as above) is the only correct solution.
SQL
Task: Select certain elements from an Array into a new Array in a generic way. To demonstrate, select all even numbers from an Array.
--Create the original array (table #nos) with numbers from 1 to 10
create table #nos (v int)
declare @n int set @n=1
while @n<=10 begin insert into #nos values (@n) set @n=@n+1 end
--Select the subset that are even into the new array (table #evens)
select v into #evens from #nos where v % 2 = 0
-- Show #evens
select * from #evens
-- Clean up so you can edit and repeat:
drop table #nos
drop table #evens
'
create temporary table nos (v int);
insert into nos values (1),(2),(3),(4),(5),(6),(7),(8),(9),(10);
create temporary table evens (v int);
insert into evens select v from nos where v%2=0;
select * from evens order by v; /*2,4,6,8,10*/
drop table nos;
drop table evens;
Or to be shorter, you could create the table evens directly from the query result :
create temporary table evens select * from nos where v%2=0;
Stata
mata
a=2,9,4,7,5,3,6,1,8
// Select even elements of a
select(a,mod(a,2):==0)
// Select the indices of even elements of a
selectindex(mod(a,2):==0)
end
Swift
let numbers = [1,2,3,4,5,6]
let even_numbers = numbers.filter { $0 % 2 == 0 }
println(even_numbers)
- Output:
[2, 4, 6]
Tcl
set l {56 21 71 27 39 62 87 76 82 94 45 83 65 45 28 90 52 44 1 89}
puts [lmap x $l {if {$x % 2} continue; set x}]
- Output:
56 62 76 82 94 28 90 52 44
Inplace way, quite the inefficient contraption compared to mapping:
proc lreplaceip {_list args} {
upvar 1 $_list list
set list [lreplace $list[set list {}] {*}$args]
}
set l {56 21 71 27 39 62 87 76 82 94 45 83 65 45 28 90 52 44 1 89}
for {set i 0} {$i < [llength $l]} {} {
if {[lindex $l $i] % 2 == 1} {
lreplaceip l $i $i
} else {
incr i
}
}
puts $l
- Output:
56 62 76 82 94 28 90 52 44
Explanation: https://wiki.tcl-lang.org/page/lreplace, section "Performance: Modifying a List In-Place"
Proof by timing removal of the end element of lists of different lengths:
proc lreplaceip {_list args} {
upvar 1 $_list list
set list [lreplace $list[set list {}] {*}$args]
}
proc iota {n {start 0}} {
set res {}
set end [expr {$start + $n}]
for {set i $start} {$i <= $end} {incr i} {
lappend res $i
}
return $res
}
foreach e {5 6 7} {
set l [iota 1e$e]
puts 1e$e
puts " lreplace: [time {set l [lreplace $l end end]}]"
puts " lreplaceip: [time {lreplaceip l end end}]"
}
- Output:
1e5 lreplace: 564 microseconds per iteration lreplaceip: 19 microseconds per iteration 1e6 lreplace: 15215 microseconds per iteration lreplaceip: 6 microseconds per iteration 1e7 lreplace: 148028 microseconds per iteration lreplaceip: 6 microseconds per iteration
Toka
10 cells is-array table
10 cells is-array even
{
variable source
[ swap source ! >r reset r> 0
[ i source @ array.get
dup 2 mod 0 <> [ drop ] ifTrue
] countedLoop
depth 0 swap [ i even array.put ] countedLoop
]
} is copy-even
10 0 [ i i table array.put ] countedLoop
table 10 copy-even
TUSCRIPT
$$ MODE TUSCRIPT
arr="1'4'9'16'25'36'49'64'81'100",even=""
LOOP nr=arr
rest=MOD (nr,2)
IF (rest==0) even=APPEND (even,nr)
ENDLOOP
PRINT even
- Output:
4'16'36'64'100
UNIX Shell
a=(1 2 3 4 5)
unset e[@]
for ((i=0;i<${#a[@]};i++)); do
[ $((a[$i]%2)) -eq 0 ] && e[$i]="${a[$i]}"
done
Or, using grep:
a=(1 2 3 4 5)
read -a e -d\n < <(printf '%s\n' "${a[@]}" | grep '[02468]$')
Either way, to display the results:
echo "${a[@]}"
echo "${e[@]}"
- Output:
1 2 3 4 5 2 4
UnixPipes
yes \ | cat -n | while read a; do ; expr $a % 2 >/dev/null && echo $a ; done
Ursala
Ursala doesn't have arrays, except when the run time system transparently converts a list to an array as needed for an external math library function call. However, selection can be done on lists.
Unary predicates
The most common way to select items from a list according to a unary
predicate p
is to write p*~
, as shown below.
#import std
#import nat
x = <89,36,13,15,41,39,21,3,15,92,16,59,52,88,33,65,54,88,93,43>
#cast %nL
y = (not remainder\2)*~ x
- Output:
<36,92,16,52,88,54,88>
Binary predicates
Selection is so frequently useful that the language has a couple of other ways to do it. Selecting according to a binary predicate can be done like this.
z = (not remainder)~| (36,<1,2,3,4,5,6,7,8,9,10,11,12>)
The value of z
will be the divisors of 36 appearing in the list.
<1,2,3,4,6,9,12>
This usage has the advantage over writing (not remainder/36)*~
with the operator
above that it allows the 36 to be part of the argument rather than
being hard coded into the function.
Operator suffixes
Many operators in Ursala allow suffixes that modify their semantics.
For example, the suffix ihB
on the identity function ~&
makes it
~&ihB
, a predicate to detect odd numbers by inspecting the binary
representation. If an operator with this kind of suffix is further
modified by appending an F
, it becomes a selection filter.
For example
shortcut = ~&ihBF x
using the x
defined above will evaluate to
<89,13,15,41,39,21,3,15,59,33,65,93,43>
There are also suffixes corresponding to the ~|
operator.
V
[even? dup 2 / >int 2 * - zero?].
[1 2 3 4 5 6 7 8 9] [even?] filter
=[2 4 6 8]
VBA
Option Explicit
Sub Main()
Dim evens() As Long, i As Long
Dim numbers() As Long
For i = 1 To 100000
ReDim Preserve numbers(1 To i)
numbers(i) = i
Next i
evens = FilterInNewArray(numbers)
Debug.Print "Count of initial array : " & UBound(numbers) & ", first item : " & numbers(LBound(numbers)) & ", last item : " & numbers(UBound(numbers))
Debug.Print "Count of new array : " & UBound(evens) & ", first item : " & evens(LBound(evens)) & ", last item : " & evens(UBound(evens))
FilterInPlace numbers
Debug.Print "Count of initial array (filtered): " & UBound(numbers) & ", first item : " & numbers(LBound(numbers)) & ", last item : " & numbers(UBound(numbers))
End Sub
Private Function FilterInNewArray(arr() As Long) As Long()
Dim i As Long, t() As Long, cpt As Long
For i = LBound(arr) To UBound(arr)
If IsEven(arr(i)) Then
cpt = cpt + 1
ReDim Preserve t(1 To cpt)
t(cpt) = i
End If
Next i
FilterInNewArray = t
End Function
Private Sub FilterInPlace(arr() As Long)
Dim i As Long, cpt As Long
For i = LBound(arr) To UBound(arr)
If IsEven(arr(i)) Then
cpt = cpt + 1
arr(cpt) = i
End If
Next i
ReDim Preserve arr(1 To cpt)
End Sub
Private Function IsEven(Number As Long) As Boolean
IsEven = (CLng(Right(CStr(Number), 1)) And 1) = 0
End Function
- Output:
Count of initial array : 100000, first item : 1, last item : 100000 Count of new array : 50000, first item : 2, last item : 100000 Count of initial array (filtered): 50000, first item : 2, last item : 100000
VBScript
test_arr_1 = Array(1,2,3,4,5,6,7,8,9,10)
test_arr_2 = Array(1,2,3,4,5,6,7,8,9,10)
WScript.StdOut.Write "Scenario 1: Create a new array"
WScript.StdOut.WriteLine
WScript.StdOut.Write "Input: " & Join(test_arr_1,",")
WScript.StdOut.WriteLine
WScript.StdOut.Write "Output: " & filter_create(test_arr_1)
WScript.StdOut.WriteBlankLines(2)
WScript.StdOut.Write "Scenario 2: Destructive approach"
WScript.StdOut.WriteLine
WScript.StdOut.Write "Input: " & Join(test_arr_2,",")
WScript.StdOut.WriteLine
WScript.StdOut.Write "Output: " & filter_destruct(test_arr_2)
WScript.StdOut.WriteBlankLines(2)
Function filter_create(arr)
ReDim arr_new(0)
For i = 0 To UBound(arr)
If arr(i) Mod 2 = 0 Then
If arr_new(0) = "" Then
arr_new(0) = arr(i)
Else
ReDim Preserve arr_new(UBound(arr_new)+1)
arr_new(UBound(arr_new)) = arr(i)
End If
End If
Next
filter_create = Join(arr_new,",")
End Function
Function filter_destruct(arr)
count = 0
For i = 0 To UBound(arr)
If arr(i) Mod 2 <> 0 Then
count = count + 1
For j = i To UBound(arr)
If j + 1 <= UBound(arr) Then
arr(j) = arr(j+1)
End If
Next
End If
Next
ReDim Preserve arr(UBound(arr)-count)
filter_destruct = Join(arr,",")
End Function
- Output:
Scenario 1: Create a new array Input: 1,2,3,4,5,6,7,8,9,10 Output: 2,4,6,8,10 Scenario 2: Destructive approach Input: 1,2,3,4,5,6,7,8,9,10 Output: 2,4,6,8,10
Visual Basic .NET
Module Filter
Sub Main()
Dim array() As Integer = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}
Dim newEvenArray() As Integer
Console.WriteLine("Current Array:")
For Each i As Integer In array
Console.WriteLine(i)
Next
newEvenArray = filterArrayIntoNewArray(array)
Console.WriteLine("New Filtered Array:")
For Each i As Integer In newEvenArray
Console.WriteLine(i)
Next
array = changeExistingArray(array)
Console.WriteLine("Orginal Array After Filtering:")
For Each i As Integer In array
Console.WriteLine(i)
Next
End Sub
Private Function changeExistingArray(array() As Integer) As Integer()
Return filterArrayIntoNewArray(array)
End Function
Private Function filterArrayIntoNewArray(array() As Integer) As Integer()
Dim result As New List(Of Integer)
For Each element As Integer In array
If element Mod 2 = 0 Then
result.Add(element)
End If
Next
Return result.ToArray
End Function
End Module
- Output:
Current Array: 1 2 3 4 5 6 7 8 9 10 New Filtered Array: 2 4 6 8 10 Orginal Array After Filtering: 2 4 6 8 10
V (Vlang)
fn reduce(mut a []int){
mut last := 0
for e in a {
if e%2==0 {
a[last] = e
last++
}
}
a = a[..last]
}
fn main() {
mut nums := [5,4,8,2,4,6,5,6,34,12,21]
even := nums.filter(it%2==0)
println('orig: $nums')
println('even: $even')
reduce(mut nums)
println('dest: $nums')
}
- Output:
orig: [5,4,8,2,4,6,5,6,34,12,21] even: [4, 8, 2, 4, 6, 6, 34, 12] dest: [4, 8, 2, 4, 6, 6, 34, 12]
WDTE
let a => import 'arrays';
let s => import 'stream';
a.stream [1; 2; 3; 4; 5; 6; 7; 8; 9; 10]
-> s.filter (@ even n => % n 2 -> == 0)
-> s.collect
-- io.writeln io.stdout
;
- Output:
[2; 4; 6; 8; 10]
Doing this in a destructive manner is not possible normally in WDTE as everything is immutable.
Wrapl
VAR a <- ALL 1:to(10);
a will be the list [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
VAR e <- ALL a:values \ $ % 2 = 0;
e will be the list [2, 4, 6, 8, 10]
Wren
var a = [1, 4, 17, 8, -21, 6, -11, -2, 18, 31]
System.print("The original array is : %(a)")
System.print("\nFiltering to a new array :-")
var evens = a.where { |e| e%2 == 0 }.toList
System.print("The even numbers are : %(evens)")
System.print("The original array is still : %(a)")
// Destructive filter, permanently remove even numbers.
evens.clear()
for (i in a.count-1..0) {
if (a[i]%2 == 0) {
evens.add(a[i])
a.removeAt(i)
}
}
evens = evens[-1..0]
System.print("\nAfter a destructive filter :-")
System.print("The even numbers are : %(evens)")
System.print("The original array is now : %(a)")
- Output:
The original array is : [1, 4, 17, 8, -21, 6, -11, -2, 18, 31] Filtering to a new array :- The even numbers are : [4, 8, 6, -2, 18] The original array is still : [1, 4, 17, 8, -21, 6, -11, -2, 18, 31] After a destructive filter :- The even numbers are : [4, 8, 6, -2, 18] The original array is now : [1, 17, -21, -11, 31]
XPL0
This uses the kludge of making the first element of an array its size. There is no 'sizeof' operator, unfortunately.
include c:\cxpl\codes; \intrinsic 'code' declarations
proc Filter(A, B, Option); \Select all even numbers from array A
int A, B, Option; \ and return them in B, unless Option = true
int I, J;
[J:= 0;
for I:= 1 to A(0) do
if (A(I)&1) = 0 then
[J:= J+1;
if Option then
A(J):= A(I)
else B(J):= A(I);
];
if Option then A(0):= J else B(0):= J;
];
int Array, Evens(11), I;
[Array:= [10, 3, 1, 4, 1, 5, 9, 2, 6, 5, 4];
Filter(Array, Evens, false);
for I:= 1 to Evens(0) do
[IntOut(0, Evens(I)); ChOut(0, ^ )];
CrLf(0);
Filter(Array, Evens \not used\, true);
for I:= 1 to Array(0) do
[IntOut(0, Array(I)); ChOut(0, ^ )];
CrLf(0);
]
- Output:
4 2 6 4 4 2 6 4
XQuery
(: Sequence of numbers from 1 to 10 :)
let $array := (1 to 10)
(: Short version :)
let $short := $array[. mod 2 = 0]
(: Long version with a FLWOR expression :)
let $long := for $value in $array
where $value mod 2 = 0
return $value
(: Show the results :)
return
<result>
<short>{$short}</short>
<long>{$long}</long>
</result>
- Output:
<?xml version="1.0" encoding="UTF-8"?>
<result>
<short>2 4 6 8 10</short>
<long>2 4 6 8 10</long>
</result>
XSLT
<xsl:for-each select="nodes[@value mod 2 = 0]">
<xsl:value-of select="@value" />
</xsl:for-each>
Z80 Assembly
TestArray_Metadata:
byte 4,4 ;4 rows, 4 columns.
TestArray:
byte 0,1,2,3
byte 4,5,6,7
byte 8,9,10,11
byte 12,13,14,15
OutputArray_Metadata:
byte 2,4
OutputArray:
ds 8,0 ;16 bytes each equaling zero
FilterEvenValues:
ld hl,TestArray_Metadata
ld a,(hl)
inc hl
ld b,(hl)
inc hl ;LD HL,TestArray
call mul_A_times_B ;unimplemented multiplication routine, multiplies A by B and returns product in A.
ld b,a ;we'll use this product as a loop counter.
ld de,OutputArray
loop_filterEvenValues:
ld a,(hl)
ld c,a
rrc c ;destructively test if odd or even. (That's why it was copied into C first.)
jr c,skipThis
ld (de),a
inc de
skipThis:
inc hl
djnz loop_filterEvenValues
ret ;return to basic
- Output:
There was no code showing the contents of OutputArray to the screen, so here's a hexdump instead:
00 02 04 06 08 0A 0C 0E
zkl
T(1,4,9,16,25,36,"37",49,64,81,100, True,self)
.filter(fcn(n){(0).isType(n) and n.isOdd})
//-->L(1,9,25,49,81)
ZX Spectrum Basic
10 LET items=100: LET filtered=0
20 DIM a(items)
30 FOR i=1 TO items
40 LET a(i)=INT (RND*items)
50 NEXT i
60 FOR i=1 TO items
70 IF FN m(a(i),2)=0 THEN LET filtered=filtered+1: LET a(filtered)=a(i)
80 NEXT i
90 DIM b(filtered)
100 FOR i=1 TO filtered
110 LET b(i)=a(i): PRINT b(i);" ";
120 NEXT i
130 DIM a(1): REM To free memory (well, almost all)
140 DEF FN m(a,b)=a-INT (a/b)*b
- Programming Tasks
- Basic language learning
- Iteration
- 11l
- ACL2
- Action!
- ActionScript
- Ada
- Aime
- ALGOL 68
- ALGOL W
- AmigaE
- AntLang
- Apex
- APL
- AppleScript
- Arturo
- AutoHotkey
- AWK
- Batch File
- BBC BASIC
- BCPL
- Bracmat
- Brat
- Burlesque
- BQN
- C
- C sharp
- C++
- Clean
- Clojure
- CoffeeScript
- Common Lisp
- Cowgol
- D
- Tango
- Delphi
- System.SysUtils
- Types
- Boost.Int
- Dyalect
- Déjà Vu
- E
- EasyLang
- EchoLisp
- Ela
- Elena
- Elixir
- Erlang
- Euphoria
- F Sharp
- Factor
- Fantom
- Forth
- Fortran
- FreeBASIC
- Frink
- Futhark
- Futhark examples needing attention
- Examples needing attention
- Gambas
- GAP
- Go
- Groovy
- Haskell
- Icon
- Unicon
- IDL
- J
- Java
- JavaFX Script
- JavaScript
- Functional
- Jq
- Julia
- K
- Kotlin
- Lambdatalk
- Lang5
- Langur
- Lasso
- Liberty BASIC
- Lisaac
- Logo
- Lua
- M2000 Interpreter
- Maple
- Mathematica
- Wolfram Language
- MATLAB
- Maxima
- MAXScript
- Min
- MiniScript
- ML
- Standard ML
- MLite
- MUMPS
- Nemerle
- NetRexx
- NewLISP
- NGS
- Nial
- Nim
- Objeck
- Objective-C
- OCaml
- Octave
- Oforth
- Ol
- OoRexx
- Oz
- PARI/GP
- Pascal
- Peloton
- Perl
- Phix
- Phix/basics
- PHL
- PHP
- Picat
- PicoLisp
- PL/I
- Pop11
- PostScript
- Initlib
- PowerShell
- Prolog
- PureBasic
- Python
- Quackery
- Q
- R
- Racket
- Raku
- Raven
- REBOL
- Red
- REXX
- Ring
- Ruby
- Run BASIC
- Rust
- Salmon
- Sather
- Scala
- Scheme
- Seed7
- SequenceL
- Sidef
- Slate
- Slope
- Smalltalk
- SQL
- Stata
- Swift
- Tcl
- Toka
- TUSCRIPT
- UNIX Shell
- UnixPipes
- Ursala
- V
- VBA
- VBScript
- Visual Basic .NET
- V (Vlang)
- WDTE
- Wrapl
- Wren
- XPL0
- XQuery
- XSLT
- Z80 Assembly
- Zkl
- ZX Spectrum Basic
- Pages with too many expensive parser function calls