Create a file
![Task](http://static.miraheze.org/rosettacodewiki/thumb/b/ba/Rcode-button-task-crushed.png/64px-Rcode-button-task-crushed.png)
You are encouraged to solve this task according to the task description, using any language you may know.
In this task, the job is to create a new empty file called "output.txt" of size 0 bytes and an empty directory called "docs". This should be done twice: once "here", i.e. in the current working directory and once in the filesystem root.
11l
<lang 11l>L(directory) [‘/’, ‘./’]
File(directory‘output.txt’, ‘w’) // create /output.txt, then ./output.txt fs:create_dir(directory‘docs’) // create directory /docs, then ./docs</lang>
4DOS Batch
<lang 4dos>echos > output.txt mkdir docs
echos > \output.txt mkdir \docs</lang>
AArch64 Assembly
<lang AArch64 Assembly> /* ARM assembly AARCH64 Raspberry PI 3B */ /* program createDirFic64.s */
/*******************************************/ /* Constantes file */ /*******************************************/ /* for this file see task include a file in language AArch64 assembly*/ .include "../includeConstantesARM64.inc"
.equ MKDIRAT, 0x22 // Linux Syscall create directory .equ CHGDIR, 0x31 // Linux Syscall change directory
/*******************************************/ /* Initialized data */ /*******************************************/ .data szMessCreateDirOk: .asciz "Create directory Ok.\n" szMessErrCreateDir: .asciz "Unable create directory. \n" szMessErrChangeDir: .asciz "Unable change directory. \n" szMessCreateFileOk: .asciz "Create file Ok.\n" szMessErrCreateFile: .asciz "Unable create file. \n" szMessErrCloseFile: .asciz "Unable close file. \n"
szNameDir: .asciz "Dix1" szNameFile: .asciz "file1.txt"
/*******************************************/ /* UnInitialized data */ /*******************************************/ .bss /*******************************************/ /* code section */ /*******************************************/ .text .global main main: // entry of program
// create directory mov x0,AT_FDCWD ldr x1,qAdrszNameDir // directory name mov x2,0775 // mode (in octal zero is important !!) mov x8,MKDIRAT // code call system create directory svc 0 // call systeme cbnz x0,99f // error ? // display message ok directory ldr x0,qAdrszMessCreateDirOk bl affichageMess // change directory ldr x0,qAdrszNameDir // directory name mov x8, #CHGDIR // code call system change directory svc #0 // call systeme cbnz x0,98f // error ? // create file mov x0,AT_FDCWD // current directory ldr x1,qAdrszNameFile // directory name mov x2,O_CREAT|O_WRONLY // flags mov x3,0644 // this zone is Octal number (0 before) mov x8,OPEN // code call system open file svc #0 // call systeme cmp x0,#0 // error ? ble 97f mov x19,x0 // save File Descriptor // display message ok file ldr x0,qAdrszMessCreateFileOk bl affichageMess // close file mov x0,x19 // Fd mov x8,CLOSE // close file svc 0 cbnz x0,96f // error ? mov x0,0 // return code Ok b 100f // end Ok
96: // display error message close file
ldr x0,qAdrszMessErrCloseFile bl affichageMess mov x0,1 // return code error b 100f
97: // display error message create file
ldr x0,qAdrszMessErrCreateFile bl affichageMess mov x0,1 // return code error b 100f
98: // display error message change directory
ldr x0,qAdrszMessErrChangeDir bl affichageMess mov x0,1 // return code error b 100f
99: // display error message create directory
ldr x0,qAdrszMessErrCreateDir bl affichageMess mov x0,1 // return code error b 100f
100: // standard end of the program
mov x8,EXIT // request to exit program svc 0 // perform the system call
qAdrszMessCreateDirOk: .quad szMessCreateDirOk qAdrszMessErrCreateDir: .quad szMessErrCreateDir qAdrszMessErrChangeDir: .quad szMessErrChangeDir qAdrszMessCreateFileOk: .quad szMessCreateFileOk qAdrszNameFile: .quad szNameFile qAdrszMessErrCreateFile: .quad szMessErrCreateFile qAdrszMessErrCloseFile: .quad szMessErrCloseFile qAdrszNameDir: .quad szNameDir /********************************************************/ /* File Include fonctions */ /********************************************************/ /* for this file see task include a file in language AArch64 assembly */ .include "../includeARM64.inc"
</lang>
Action!
The attached result has been obtained under DOS 2.5. <lang Action!>PROC Dir(CHAR ARRAY filter)
CHAR ARRAY line(255) BYTE dev=[1]
Close(dev) Open(dev,filter,6) DO InputSD(dev,line) PrintE(line) IF line(0)=0 THEN EXIT FI OD Close(dev)
RETURN
PROC CreateFile(CHAR ARRAY fname)
BYTE dev=[1]
Close(dev) Open(dev,fname,8) Close(dev)
RETURN
PROC Main()
CHAR ARRAY filter="D:*.*", fname="D:OUTPUT.TXT"
PrintF("Dir ""%S""%E",filter) Dir(filter)
PrintF("Create file ""%S""%E%E",fname) CreateFile(fname)
PrintF("Dir ""%S""%E",filter) Dir(filter)
RETURN</lang>
- Output:
Screenshot from Atari 8-bit computer
Dir "D:*.*" DOS SYS 037 DUP SYS 042 628 FREE SECTORS Create file "D:OUTPUT.TXT" Dir "D:*.*" DOS SYS 037 DUP SYS 042 OUTPUT TXT 001 627 FREE SECTORS
Ada
Notes:
- Use Streams_IO to write 0 bytes. File creation with Ada.Text_IO does not create 0 byte files (it inserts EOL/EOF).
- The forward slash (/) notation works in Windows XP as well as Unix/Linux.
<lang ada>with Ada.Streams.Stream_IO, Ada.Directories; use Ada.Streams.Stream_IO, Ada.Directories;
procedure File_Creation is
File_Handle : File_Type;
begin
Create (File_Handle, Out_File, "output.txt"); Close (File_Handle); Create_Directory("docs"); Create (File_Handle, Out_File, "/output.txt"); Close (File_Handle); Create_Directory("/docs");
end File_Creation;</lang>
Aikido
<lang aikido> var sout = openout ("output.txt") // in current dir sout.close()
var sout1 = openout ("/output.txt") // in root dir sout1.close()
mkdir ("docs") mkdir ("/docs")
</lang>
Aime
<lang aime># Make a directory using the -mkdir- program void mkdir(text p) {
sshell ss;
b_cast(ss_path(ss), "mkdir");
l_append(ss_argv(ss), "mkdir"); l_append(ss_argv(ss), p);
ss_link(ss);
}
void create_file(text p) {
file f;
f_open(f, p, OPEN_CREATE | OPEN_TRUNCATE | OPEN_WRITEONLY, 00644);
}
void create_pair(text prefix) {
create_file(cat(prefix, "output.txt")); mkdir(cat(prefix, "docs"));
}
integer main(void) {
create_pair(""); create_pair("/");
return 0;
}</lang>
ALGOL 68
Note: file names are Operating System dependent.
- ALGOL 68G does not support pages, and "set" procedure only has 2 arguments.
- ELLA ALGOL 68 also encounters problems with "set" page on linux.
It may be best to to use an operating system provided library. <lang algol68>main:(
INT errno;
PROC touch = (STRING file name)INT: BEGIN FILE actual file; INT errno := open(actual file, file name, stand out channel); IF errno NE 0 THEN GO TO stop touch FI; close(actual file); # detach the book and keep it # errno EXIT stop touch: errno END;
errno := touch("input.txt"); errno := touch("/input.txt");
# ALGOL 68 has no concept of directories, however a file can have multiple pages, the pages are identified by page number only #
PROC mkpage = (STRING file name, INT page x)INT: BEGIN FILE actual file; INT errno := open(actual file, file name, stand out channel); IF errno NE 0 THEN GO TO stop mkpage FI; set(actual file,page x,1,1); # skip to page x, line 1, character 1 # close(actual file); # detach the new page and keep it # errno EXIT stop mkpage: errno END;
errno := mkpage("input.txt",2);
)</lang>
APL
<lang APL> 'output.txt' ⎕ncreate ¯1+⌊/0,⎕nnums
'\output.txt' ⎕ncreate ¯1+⌊/0,⎕nnums ⎕mkdir 'Docs' ⎕mkdir '\Docs'</lang>
AppleScript
AppleScript itself has limited built-in File System access, but folders (directories) can be created by controlling the Mac OS Finder, and files can be created and accessed using the Standard Additions (osax) scripting addition included with AppleScript. Also, the Finder has no concept of the working directory (as it is a GUI). You can however target the frontmost Finder window that is open.
Create a zero-byte text file on the startup disk (root directory). Note: the close
command is a memory allocation housekeeping command that should be performed once file access is complete.
<lang AppleScript >close (open for access "output.txt")</lang>
Create a new folder (directory) on the startup disk (root directory).
<lang AppleScript >tell application "Finder" to make new folder at startup disk with properties {name:"docs"}</lang>
Create a zero-byte text file in the frontmost (open) Finder window.
<lang AppleScript >tell application "Finder" to set wd to target of window 1 as string
close (open for access wd & "output.txt")</lang>
Create a new folder (directory) in the frontmost (open) Finder window.
<lang AppleScript >tell application "Finder" to make new folder at window 1 with properties {name:"docs"}</lang>
--Apl.way 21:20, 9 June 2010 (UTC)
Observations on 28th February 2020:
- The command for closing a file access previously opened with
open for access
isclose access
, notclose
. - While specifying just a file name did at one time cause the file to be created at the root level of the startup disk, this is now prevented by macOS's security measures:
- The system actively discourages the creation of files in that location.
- It's more likely to cooperate with file commands having AppleScript or application "specifiers" as parameters than it is when the parameters are merely text.
- In macOS, the "current working directory" is effectively the root level of the startup disk anyway, except in the Terminal application when "cd" is used or during a shell script containing "cd" which is being executed using AppleScript's
do shell script
command. - In view of points 2.2 and 3 above, this task is ideally one that should not be casually performed on Mac computers.
ARM Assembly
<lang ARM Assembly>
/* ARM assembly Raspberry PI */ /* program createDirFic.s */
/* Constantes */ .equ STDOUT, 1 @ Linux output console .equ EXIT, 1 @ Linux syscall exit Program .equ WRITE, 4 @ Linux syscall write FILE .equ MKDIR, 0x27 @ Linux Syscal create directory .equ CHGDIR, 0xC @ Linux Syscal change directory .equ CREATE, 0x8 @ Linux Syscal create file .equ CLOSE, 0x6 @ Linux Syscal close file /* Initialized data */ .data szMessCreateDirOk: .asciz "Create directory Ok.\n" szMessErrCreateDir: .asciz "Unable create directory. \n" szMessErrChangeDir: .asciz "Unable change directory. \n" szMessCreateFileOk: .asciz "Create file Ok.\n" szMessErrCreateFile: .asciz "Unable create file. \n" szMessErrCloseFile: .asciz "Unable close file. \n"
szNameDir: .asciz "Dir1" szNameFile: .asciz "file1.txt"
/* UnInitialized data */
.bss
/* code section */ .text .global main main: @ entry of program
push {fp,lr} @ saves registers
@ create directory
ldr r0,iAdrszNameDir @ directory name mov r1,#0775 @ mode (in octal zero is important !!) mov r7, #MKDIR @ code call system create directory swi #0 @ call systeme cmp r0,#0 @ error ? bne 99f
@ display message ok directory ldr r0,iAdrszMessCreateDirOk bl affichageMess @ change directory ldr r0,iAdrszNameDir @ directory name mov r7, #CHGDIR @ code call system change directory swi #0 @ call systeme cmp r0,#0 @ error ? bne 98f @ create file ldr r0,iAdrszNameFile @ directory name mov r1,#0755 @ mode (in octal zero is important !!) mov r2,#0 mov r7,#CREATE @ code call system create file swi #0 @ call systeme cmp r0,#0 @ error ? ble 97f mov r8,r0 @ save File Descriptor @ display message ok file ldr r0,iAdrszMessCreateFileOk bl affichageMess
@ close file mov r0,r8 @ Fd mov r7, #CLOSE @ close file swi 0 cmp r0,#0 bne 96f @ end Ok b 100f
96:
@ display error message close file ldr r0,iAdrszMessErrCloseFile bl affichageMess b 100f
97:
@ display error message create file ldr r0,iAdrszMessErrCreateFile bl affichageMess b 100f
98:
@ display error message change directory ldr r0,iAdrszMessErrChangeDir bl affichageMess b 100f
99:
@ display error message create directory ldr r0,iAdrszMessErrCreateDir bl affichageMess b 100f
100: @ standard end of the program
mov r0, #0 @ return code pop {fp,lr} @restaur 2 registers mov r7, #EXIT @ request to exit program swi 0 @ perform the system call
iAdrszMessCreateDirOk: .int szMessCreateDirOk iAdrszMessErrCreateDir: .int szMessErrCreateDir iAdrszMessErrChangeDir: .int szMessErrChangeDir iAdrszMessCreateFileOk: .int szMessCreateFileOk iAdrszNameFile: .int szNameFile iAdrszMessErrCreateFile: .int szMessErrCreateFile iAdrszMessErrCloseFile: .int szMessErrCloseFile
iAdrszNameDir: .int szNameDir /******************************************************************/ /* display text with size calculation */ /******************************************************************/ /* r0 contains the address of the message */ affichageMess:
push {fp,lr} /* save registres */ push {r0,r1,r2,r7} /* save others registers */ mov r2,#0 /* counter length */
1: /* loop length calculation */
ldrb r1,[r0,r2] /* read octet start position + index */ cmp r1,#0 /* if 0 its over */ addne r2,r2,#1 /* else add 1 in the length */ bne 1b /* and loop */ /* so here r2 contains the length of the message */ mov r1,r0 /* address message in r1 */ mov r0,#STDOUT /* code to write to the standard output Linux */ mov r7, #WRITE /* code call system "write" */ swi #0 /* call systeme */ pop {r0,r1,r2,r7} /* restaur others registers */ pop {fp,lr} /* restaur des 2 registres */ bx lr /* return */
</lang>
Arturo
<lang rebol>output: "output.txt" docs: "docs"
write output "" write.directory docs ø
write join.path ["/" output] "" write.directory join.path ["/" docs] ø</lang>
AutoHotkey
<lang AutoHotkey>FileAppend,,output.txt FileCreateDir, docs FileAppend,,c:\output.txt FileCreateDir, c:\docs</lang>
AWK
<lang awk>BEGIN {
printf "" > "output.txt" close("output.txt") printf "" > "/output.txt" close("/output.txt") system("mkdir docs") system("mkdir /docs")
}</lang>
Axe
Since the TI-OS does not have a true filesystem, this task is emulated using an application variable instead of a file. <lang axe>GetCalc("appvOUTPUT",0)</lang>
BASIC
<lang qbasic>OPEN "output.txt" FOR OUTPUT AS 1 CLOSE OPEN "\output.txt" FOR OUTPUT AS 1 CLOSE</lang>
BaCon
<lang qbasic>' Create file and dir TRAP LOCAL
OPEN "output.txt" FOR WRITING AS afile CLOSE FILE afile
CATCH GOTO report OPEN "/output.txt" FOR WRITING AS afile CLOSE FILE afile
LABEL trydir MAKEDIR "docs"
CATCH GOTO report2 MAKEDIR "/docs" END
LABEL report
PRINT ERR$(ERROR) GOTO trydir
LABEL report2
PRINT ERR$(ERROR)</lang>
- Output:
prompt$ ./creates Error opening file: Permission denied Unable to create directory: Permission denied prompt$ ls -gocart ... -rw-rw-r-- 1 324 May 2 23:53 creates.bac -rwxrwxr-x 1 27184 May 2 23:53 creates -rw-rw-r-- 1 0 May 2 23:53 output.txt drwxr-xr-x 2 4096 May 2 23:53 docs drwxrwxr-x 7 12288 May 2 23:53 .
Commodore BASIC
On most Commodore 8-bit systems, the most commonly used storage devices were floppy disk drives and cassette tape drives, however these file systems are typically flat (linear) and do not feature any kind of file hierarchy. It is possible that other third-party storage devices (hard drives, etc.) may support such hierarchies, however, the commands to create, delete, and/or navigate in and out of various directories would be unique and specialized to those devices.
The example below illustrates the syntax for the open statement which will create the file, however, something must be written to the file or else nothing will actually be created on the disk. In this case we will simply write a single null byte.
Even still, the empty file will still cause Commodore DOS to allocate 1 data block to the file, as reported in a directory listing.
<lang gwbasic> 10 rem create a file 20 open 10,8,10,"0:output.txt,seq,write" 30 print#10,chr$(0) 40 close 10 50 rem check device status for error 60 open 15,8,15:input#15,a,b$,c,d:print a;b$;c;d:close 15 </lang>
RUN 0 OK 0 0 READY. LOAD "$",8 SEARCHING FOR $ LOADING READY. LIST 0 "ROSETTA CODE " RC 2A 1 "OUTPUT.TXT" SEQ 663 BLOCKS FREE. READY.
Batch File
<lang dos>copy nul output.txt copy nul \output.txt</lang>
<lang dos>md docs md \docs</lang>
BBC BASIC
<lang bbcbasic> CLOSE #OPENOUT("output.txt")
CLOSE #OPENOUT("\output.txt") *MKDIR docs *MKDIR \docs</lang>
Blue
Linux/x86-64. If you really want to create a file and dir in the root, prefix the paths with a slash.
<lang blue>global _start
- syscall ( num:eax -- result:eax ) syscall ;
- exit ( status:edi -- noret ) 60 syscall ;
- bye ( -- noret ) 0 exit ;
- die ( err:eax -- noret ) neg exit ;
- unwrap ( result:eax -- value:eax ) dup 0 cmp ' die xl ;
- ordie ( result -- ) unwrap drop ;
- open ( pathname:edi flags:esi mode:edx -- fd:eax ) 2 syscall unwrap ;
- close ( fd:edi -- ) 3 syscall ordie ;
- mkdir ( pathname:edi mode:esi -- ) 83 syscall ordie ;
00001 const for-writing 00100 const create 01000 const truncate
- create-file ( pathname -- )
create for-writing or truncate or 0640 open close ;
- make-directory ( pathname -- ) 0750 mkdir ;
- create-output-file ( -- ) s" output.txt" drop create-file ;
- make-docs-directory ( -- ) s" docs" drop make-directory ;
- _start ( -- noret )
create-output-file make-docs-directory bye
- </lang>
Bracmat
<lang bracmat>put$(,"output.txt",NEW)</lang> Or <lang bracmat>fil$("output.txt",w)</lang> In the latter case the file is still open, so unless the file is implicitly flushed and closed by ending the Bracmat program, you would want to close it explicitly: <lang bracmat>fil$(,SET,-1)</lang> To create a directory we are dependent on the underlying OS. In DOS: <lang bracmat>sys$"mkdir docs"</lang> And in the file system root: <lang bracmat>sys$"mkdir \\docs"</lang>
C
ISO C
ISO C (directory creation not supported): <lang c>#include <stdio.h>
int main() {
FILE *fh = fopen("output.txt", "w"); fclose(fh);
return 0;
}</lang>
POSIX
<lang c>#include <sys/stat.h>
- include <unistd.h>
- include <fcntl.h>
int main() { /* permissions are before umask */
int fd = open("output.txt", O_WRONLY|O_CREAT|O_TRUNC, 0640); /* rights 0640 for rw-r----- */ /* or equivalently: int fd = creat("output.txt", 0640); */ /* rights 0640 for rw-r----- */ close(fd);
mkdir("docs", 0750); /* rights 0750 for rwxr-x--- */
return 0;
}</lang>
(for creation in the filesystem root, replace the filenames by "/output.txt" and "/docs")
Windows API
First, a solution with the C runtime functions _creat
and _mkdir
.
<lang c>#include <direct.h>
- include <io.h>
- include <sys/stat.h>
int main(void) {
int f; f = _creat("output.txt", _S_IWRITE); if (f == -1) { perror("Unable to create file"); } else { _close(f); } if (_mkdir("docs") == -1) { perror("Unable to create directory"); } f = _creat("\\output.txt", _S_IWRITE); if (f == -1) { perror("Unable to create file"); } else { _close(f); } if (_mkdir("\\docs") == -1) { perror("Unable to create directory"); }
return 0;
}</lang>
Another solution with the kernel32 API functions CreateFile
and CreateDirectory
.
<lang c>#include <windows.h>
- include <stdio.h>
int main(void) {
HANDLE hFile; hFile = CreateFile("output.txt", GENERIC_WRITE, 0, NULL, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL); if (hFile == INVALID_HANDLE_VALUE) { printf("Unable to create file\n"); } else { CloseHandle(hFile); } if (CreateDirectory("docs", NULL) == 0) { printf("Unable to create directory\n"); }
hFile = CreateFile("\\output.txt", GENERIC_WRITE, 0, NULL, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL); if (hFile == INVALID_HANDLE_VALUE) { printf("Unable to create file\n"); } else { CloseHandle(hFile); }
if (CreateDirectory("\\docs", NULL) == 0) { printf("Unable to create directory\n"); }
return 0;
}</lang>
OS/2
Using the OS/2 API functions DosOpen
and DosMkDir
.
<lang c>#include <os2.h>
int main(void) {
ULONG Result, ActionTaken, hFile; Result = DosOpen("output.txt", &hFile, &ActionTaken, 0L, FILE_NORMAL, OPEN_ACTION_REPLACE_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW, OPEN_ACCESS_WRITEONLY | OPEN_SHARE_DENYREADWRITE, NULL); if (Result != 0) { printf("Unable to create file\n"); } else { DosClose(hFile); } Result = DosMkDir("docs", NULL); if (Result != 0) { printf("Unable to create directory\n"); }
Result = DosOpen("\\output.txt", &hFile, &ActionTaken, 0L, FILE_NORMAL, OPEN_ACTION_REPLACE_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW, OPEN_ACCESS_WRITEONLY | OPEN_SHARE_DENYREADWRITE, NULL); if (Result != 0) { printf("Unable to create file\n"); } else { DosClose(hFile); } Result = DosMkDir("\\docs", NULL); if (Result != 0) { printf("Unable to create directory\n"); }
return 0;
}</lang>
C#
<lang csharp>using System; using System.IO;
class Program {
static void Main(string[] args) { File.Create("output.txt"); File.Create(@"\output.txt");
Directory.CreateDirectory("docs"); Directory.CreateDirectory(@"\docs"); }
}</lang>
C++
Uses some Microsoft library: <lang cpp>#include <direct.h>
- include <fstream>
int main() {
std::fstream f("output.txt", std::ios::out); f.close(); f.open("/output.txt", std::ios::out); f.close();
_mkdir("docs"); _mkdir("/docs");
return 0;
}</lang>
A cross-platform solution using C++17
<lang cpp>#include <filesystem>
- include <fstream>
namespace fs = std::filesystem;
int main() {
std::fstream f("output.txt", std::ios::out); f.close(); f.open("/output.txt", std::ios::out); f.close();
fs::create_directory("docs"); fs::create_directory("/docs");
}</lang>
ChucK
This creates a file in root: <lang c> FileIO text; text.open("output.txt", FileIO.WRITE); </lang>
Clojure
<lang lisp>(import '(java.io File)) (.createNewFile (new File "output.txt")) (.mkdir (new File "docs")) (.createNewFile (File. (str (File/separator) "output.txt"))) (.mkdir (File. (str (File/separator) "docs")))</lang>
COBOL
and other compilers with the system call extensions
<lang COBOL> identification division.
program-id. create-a-file.
data division. working-storage section. 01 skip pic 9 value 2. 01 file-name. 05 value "/output.txt". 01 dir-name. 05 value "/docs". 01 file-handle usage binary-long.
procedure division. files-main.
*> create in current working directory perform create-file-and-dir
*> create in root of file system, will fail without privilege move 1 to skip perform create-file-and-dir
goback.
create-file-and-dir. *> create file in current working dir, for read/write call "CBL_CREATE_FILE" using file-name(skip:) 3 0 0 file-handle if return-code not equal 0 then display "error: CBL_CREATE_FILE " file-name(skip:) ": " file-handle ", " return-code upon syserr end-if
*> create dir below current working dir, owner/group read/write call "CBL_CREATE_DIR" using dir-name(skip:) if return-code not equal 0 then display "error: CBL_CREATE_DIR " dir-name(skip:) ": " return-code upon syserr end-if .
end program create-a-file.</lang>
- Output:
prompt$ cobc -xj create-a-file.cob error: CBL_CREATE_FILE /output.txt: -0000000001, +000000035 error: CBL_CREATE_DIR /docs: +000000128
Errors due to running sample without root permissions.
prompt$ ls -larct ... -rw-rw-r-- 1 rosetta rosetta 1279 Jun 1 08:14 create-a-file.cob -rwxrwxr-x 1 rosetta rosetta 13896 Jun 1 08:17 create-a-file -rw-rw-r-- 1 rosetta rosetta 0 Jun 1 08:17 output.txt drwxrwx--- 2 rosetta rosetta 4096 Jun 1 08:17 docs drwxrwxr-x 5 rosetta rosetta 12288 Jun 1 08:17 .
Common Lisp
Lisp provides open and close commands for I/O with files<lang lisp>(let ((stream (open "output.txt" :direction :output)))
(close stream))</lang>
but it is more common to use with-open-file which has better exception handling. <lang lisp>(with-open-file (stream "output.txt" :direction :output)
;; use the stream here )</lang>
As lisp is capable of being run on many different platforms and no assumptions should be made about the filesystem there are functions to construct paths in a platform independent manner <lang lisp>(let ((paths (list (make-pathname :directory '(:relative "docs"))
(make-pathname :directory '(:absolute "docs"))))) (mapcar #'ensure-directories-exist paths))</lang>
So creating a file called output.txt with an absolute path in the root directory becomes: <lang lisp>(with-open-file
(stream (make-pathname :directory '(:absolute "") :name "output.txt") :direction :output))</lang>
On the other hand, if you may depend on the platform's pathname syntax then shorter notation may be used: <lang lisp>(mapcar #'ensure-directories-exist '(#p"docs/" #p"/docs/")))</lang>
Component Pascal
<lang oberon2> MODULE CreateFile; IMPORT Files, StdLog;
PROCEDURE Do*; VAR f: Files.File; res: INTEGER; BEGIN f := Files.dir.New(Files.dir.This("docs"),Files.dontAsk); f.Register("output","txt",TRUE,res); f.Close();
f := Files.dir.New(Files.dir.This("C:\AEAT\docs"),Files.dontAsk); f.Register("output","txt",TRUE,res); f.Close() END Do;
END CreateFile. </lang>
Crystal
<lang ruby>File.write "output.txt", "" Dir.mkdir "docs"
File.write "/output.txt", "" Dir.mkdir "/docs"</lang>
D
For file creation, std.file.write function & std.stream.file class are used.
For dir creation, std.file.mkdir is used.
<lang d>module fileio ;
import std.stdio ;
import std.path ;
import std.file ;
import std.stream ;
string[] genName(string name){
string cwd = curdir ~ sep ; // on current directory string root = sep ; // on root name = std.path.getBaseName(name) ; return [cwd ~ name, root ~ name] ;
} void Remove(string target){
if(exists(target)){ if (isfile(target)) std.file.remove(target); else std.file.rmdir(target) ; }
} void testCreate(string filename, string dirname){
// files: foreach(fn ; genName(filename)) try{ writefln("file to be created : %s", fn) ; std.file.write(fn, cast(void[])null) ; writefln("\tsuccess by std.file.write") ; Remove(fn) ; (new std.stream.File(fn, FileMode.OutNew)).close() ; writefln("\tsuccess by std.stream") ; Remove(fn) ; } catch(Exception e) { writefln(e.msg) ; } // dirs: foreach(dn ; genName(dirname)) try{ writefln("dir to be created : %s", dn) ; std.file.mkdir(dn) ; writefln("\tsuccess by std.file.mkdir") ; Remove(dn) ; } catch(Exception e) { writefln(e.msg) ; }
} void main(){
writefln("== test: File & Dir Creation ==") ; testCreate("output.txt", "docs") ;
}</lang>
Dc
<lang dc>! for d in . / ;do > "$d/output.txt" ; mkdir "$d/docs" ;done</lang>
DCL
<lang DCL>open/write output_file output.txt open/write output_file [000000]output.txt create/directory [.docs] create/directory [000000.docs]</lang>
Delphi
These functions illustrate two methods for creating text files in Delphi: standard text file I/O and filestreams.
<lang Delphi> program createFile;
{$APPTYPE CONSOLE}
uses
Classes, SysUtils;
const
filename = 'output.txt';
var
cwdPath, fsPath: string;
// Create empty file in current working directory
function CreateEmptyFile1: Boolean;
var
f: textfile;
begin
// Make path to the file to be created cwdPath := ExtractFilePath(ParamStr(0)) + '1_'+filename;
// Create file AssignFile(f,cwdPath); {$I-} Rewrite(f); {$I+} Result := IOResult = 0; CloseFile(f);
end;
// Create empty file in filesystem root function CreateEmptyFile2: Boolean; var
f: textfile;
begin
// Make path to the file to be created fsPath := ExtractFileDrive(ParamStr(0)) + '\' + '2_'+filename;
// Create file AssignFile(f,fsPath); {$I-} Rewrite(f); {$I+} Result := IOResult = 0; CloseFile(f);
end;
function CreateEmptyFile3: Boolean; var
fs: TFileStream;
begin
// Make path to the file to be created cwdPath := ExtractFilePath(ParamStr(0)) + '3_'+filename;
// Create file fs := TFileStream.Create(cwdPath,fmCreate); fs.Free; Result := FileExists(cwdPath);
end;
function CreateEmptyFile4: Boolean; var
fs: TFileStream;
begin
// Make path to the file to be created fsPath := ExtractFileDrive(ParamStr(0)) + '\' + '4_'+filename;
// Create file fs := TFileStream.Create(fsPath,fmCreate); fs.Free; Result := FileExists(fsPath);
end;
begin
if CreateEmptyFile1 then Writeln('File created at '+cwdPath) else Writeln('Error creating file at '+cwdPath);
if CreateEmptyFile2 then Writeln('File created at '+fsPath) else Writeln('Error creating file at '+fsPath);
if CreateEmptyFile3 then Writeln('File created at '+cwdPath) else Writeln('Error creating file at '+cwdPath);
if CreateEmptyFile4 then Writeln('File created at '+fsPath) else Writeln('Error creating file at '+fsPath);
// Keep console window open Readln;
end.
</lang>
E
<lang e><file:output.txt>.setBytes([]) <file:docs>.mkdir(null) <file:///output.txt>.setBytes([]) <file:///docs>.mkdir(null)</lang>
EchoLisp
<lang lisp>
- The file system is the browser local storage
- It is divided into named stores (directories)
- "user" is the default (home) store
- before
- list of stores
(local-stores) → ("system" "user" "words" "reader" "info" "root")
(local-put-value "output.txt" "") → "output.txt" ; into "user" (local-make-store "user/docs") → "user/docs" (local-put-value "output.txt" "" "root") → "output.txt" ; into "root" (local-make-store 'root/docs) → "root/docs"
- after
- list of stores
(local-stores 'root) → ("root" "root/docs") (local-stores 'user) → ("user" "user/docs") </lang>
Elena
ELENA 4.x : <lang elena>import system'io;
public program() {
File.assign("output.txt").textwriter().close(); File.assign("\output.txt").textwriter().close(); Directory.assign("docs").create(); Directory.assign("\docs").create();
}</lang>
Elixir
<lang elixir>File.open("output.txt", [:write]) File.open("/output.txt", [:write])
File.mkdir!("docs") File.mkdir!("/docs")</lang>
Emacs Lisp
<lang Lisp>(make-empty-file "output.txt") (make-directory "docs") (make-empty-file "/output.txt") (make-directory "/docs")</lang>
Erlang
"/" is documented as working on Windows. <lang erlang> -module(new_file). -export([main/0]).
main() -> ok = file:write_file( "output.txt", <<>> ), ok = file:make_dir( "docs" ), ok = file:write_file( filename:join(["/", "output.txt"]), <<>> ), ok = file:make_dir( filename:join(["/", "docs"]) ). </lang>
ERRE
Filenames are in 8+3 DOS format: without drive and directory info, refer to the same directory as the ERRE program is running from; full pathnames can include drive name and directory. You must use PC.LIB for managing directories. <lang ERRE> PROGRAM FILE_TEST
!$INCLUDE="PC.LIB"
BEGIN
OPEN("O",#1,"output.txt") CLOSE(1) OS_MKDIR("C:\RC") ! with the appropriate access rights ....... OPEN("O",#1,"C:\RC\output.txt") CLOSE(1)
END PROGRAM </lang>
Euphoria
<lang euphroria>integer fn
-- In the current working directory system("mkdir docs",2) fn = open("output.txt","w") close(fn)
-- In the filesystem root system("mkdir \\docs",2) fn = open("\\output.txt","w") close(fn)</lang>
F#
<lang fsharp>open System.IO
[<EntryPoint>] let main argv =
let fileName = "output.txt" let dirName = "docs" for path in ["."; "/"] do ignore (File.Create(Path.Combine(path, fileName))) ignore (Directory.CreateDirectory(Path.Combine(path, dirName))) 0</lang>
Factor
<lang factor>USE: io.directories
"output.txt" "/output.txt" [ touch-file ] bi@ "docs" "/docs" [ make-directory ] bi@</lang>
Fancy
<lang fancy>["/", "./"] each: |dir| {
# create '/docs', then './docs' Directory create: (dir ++ "docs") # create files /output.txt, then ./output.txt File open: (dir ++ "output.txt") modes: ['write] with: |f| { f writeln: "hello, world!" }
}</lang>
Forth
There is no means to create directories in ANS Forth. <lang forth> s" output.txt" w/o create-file throw ( fileid) drop s" /output.txt" w/o create-file throw ( fileid) drop</lang>
Fortran
Don't know a way of creating directories in Fortran
- Edit: Use system commands to create directories
<lang fortran> PROGRAM CREATION OPEN (UNIT=5, FILE="output.txt", STATUS="NEW") ! Current directory CLOSE (UNIT=5) OPEN (UNIT=5, FILE="/output.txt", STATUS="NEW") ! Root directory CLOSE (UNIT=5)
!Directories (Use System from GNU Fortran Compiler) ! -- Added by Anant Dixit, November 2014 call system("mkdir docs/") call system("mkdir ~/docs/")
END PROGRAM </lang>
FreeBASIC
<lang freebasic>' FB 1.05.0 Win64
' create empty file and sub-directory in current directory Open "output.txt" For Output As #1 Close #1 MkDir "docs"
' create empty file and sub-directory in root directory c:\ ' creating file in root requires administrative privileges in Windows 10 Open "c:\output.txt" For Output As #1 Close #1 MkDir "c:\docs"
Print "Press any key to quit" Sleep</lang>
friendly interactive shell
<lang fishshell>touch {/,}output.txt # create both /output.txt and output.txt mkdir {/,}docs # create both /docs and docs</lang>
FunL
<lang funl>import io.File
File( 'output.txt' ).createNewFile() File( File.separator + 'output.txt' ).createNewFile() File( 'docs' ).mkdir() File( File.separator + 'docs' ).mkdir()</lang>
Gambas
Click this link to run this code <lang gambas>Public Sub Main() Dim byCount As Byte Dim sToSave As String
For byCount = 0 To 50
sToSave &= Format(Str(byCount), "00") & " - Charlie was here!" & gb.NewLine
Next
File.Save(User.Home &/ "TestFile", sToSave) Print File.Load(User.Home &/ "TestFile")
End</lang> Output:
00 - Charlie was here! 01 - Charlie was here! 02 - Charlie was here! 03 - Charlie was here! 04 - Charlie was here! .........
Go
<lang go>package main
import (
"fmt" "os"
)
func createFile(fn string) {
f, err := os.Create(fn) if err != nil { fmt.Println(err) return } fmt.Println("file", fn, "created!") f.Close()
}
func createDir(dn string) {
err := os.Mkdir(dn, 0666) if err != nil { fmt.Println(err) return } fmt.Println("directory", dn, "created!")
}
func main() {
createFile("input.txt") createFile("/input.txt") createDir("docs") createDir("/docs")
}</lang>
Groovy
<lang groovy>new File("output.txt").createNewFile() new File(File.separator + "output.txt").createNewFile() new File("docs").mkdir() new File(File.separator + "docs").mkdir()</lang>
Haskell
<lang haskell>import System.Directory
createFile name = writeFile name ""
main = do
createFile "output.txt" createDirectory "docs" createFile "/output.txt" createDirectory "/docs"</lang>
HicEst
<lang hicest>SYSTEM(DIR="\docs") ! create argument if not existent, make it current OPEN(FILE="output.txt", "NEW") ! in current directory
SYSTEM(DIR="C:\docs") ! create C:\docs if not existent, make it current OPEN(FILE="output.txt", "NEW") ! in C:\docs </lang>
i
<lang i>software { create("output.txt") create("docs/") create("/output.txt") create("/docs/") }</lang>
Icon and Unicon
Icon does not support 'mkdir' - otherwise the Unicon code below will work. A work around would be to use 'system' to invoke command line to create a directory. <lang Unicon>every dir := !["./","/"] do {
close(open(f := dir || "input.txt","w")) |stop("failure for open ",f) mkdir(f := dir || "docs") |stop("failure for mkdir ",f) }</lang>
Note: Icon and Unicon accept both / and \ for directory separators.
J
The conjunction !: with a scalar 1 to the left (1!:) provides the underlying cross-platform support for working with files.
<lang j> 1!:2 <'/output.txt' NB. write an empty file
1!:5 <'/docs' NB. create a directory</lang>
However a number of libraries provide a more convenient/conventional interface to that underlying functionality. <lang j>require 'files' NB. create two empty files named /output.txt and output.txt fwrite '/output.txt' ; 'output.txt'
require 'general/dirutils' NB. addon package NB. create two directories: /docs and docs: dircreate '/docs' ; 'docs'</lang>
Finally note that writing a file in J creates that file. In typical use, files are referred to by name, and the entire contents of the file are written. (Appends and partial writes are also supported but they are more complicated than the typical case.)
See Also
- http://www.jsoftware.com/help/learning/28.htm
- http://www.jsoftware.com/help/jforc/input_and_output.htm
- http://www.jsoftware.com/jwiki/Studio/Mapped%20Files
Java
<lang java>import java.io.*; public class CreateFileTest { public static void main(String args[]) { try { new File("output.txt").createNewFile(); new File(File.separator + "output.txt").createNewFile(); new File("docs").mkdir(); new File(File.separator + "docs").mkdir(); } catch (IOException e) { System.err.println(e.getMessage()); } } }</lang>
JavaScript
<lang javascript>const fs = require('fs');
function fct(err) {
if (err) console.log(err);
}
fs.writeFile("output.txt", "", fct); fs.writeFile("/output.txt", "", fct);
fs.mkdir("docs", fct); fs.mkdir("/docs", fct);</lang>
JCL
<lang JCL> // EXEC PGM=IEFBR14 //* CREATE EMPTY FILE NAMED "OUTPUT.TXT" (file names upper case only) //ANYNAME DD UNIT=SYSDA,SPACE=(0,0),DSN=OUTPUT.TXT,DISP=(,CATLG) //* CREATE DIRECTORY (PARTITIONED DATA SET) NAMED "DOCS" //ANYNAME DD UNIT=SYSDA,SPACE=(TRK,(1,1)),DSN=DOCS,DISP=(,CATLG) </lang>
Julia
<lang Julia># many I/O functions have UNIX names
touch("output.txt") mkdir("docs")
- probably don't have permission
try
touch("/output.txt") mkdir("/docs")
catch e
warn(e)
end</lang>
K
Directory creation is OS-dependent
<lang K> "output.txt" 1: ""
"/output.txt" 1: "" \ mkdir docs \ mkdir /docs</lang>
Kotlin
<lang scala>/* testing on Windows 10 which needs administrative privileges
to create files in the root */
import java.io.File
fun main(args: Array<String>) {
val filePaths = arrayOf("output.txt", "c:\\output.txt") val dirPaths = arrayOf("docs", "c:\\docs") var f: File for (path in filePaths) { f = File(path) if (f.createNewFile()) println("$path successfully created") else println("$path already exists") } for (path in dirPaths) { f = File(path) if (f.mkdir()) println("$path successfully created") else println("$path already exists") }
}</lang>
- Output:
output.txt successfully created c:\output.txt successfully created docs successfully created c:\docs successfully created
Running program again after files created :
- Output:
output.txt already exists c:\output.txt already exists docs already exists c:\docs already exists
LabVIEW
This image is a VI Snippet, an executable image of LabVIEW code. The LabVIEW version is shown on the top-right hand corner. You can download it, then drag-and-drop it onto the LabVIEW block diagram from a file browser, and it will appear as runnable, editable code.
Lasso
<lang Lasso>// create file local(f) = file handle => { #f->close }
- f->openWriteOnly('output.txt')
// make directory, just like a file local(d = dir('docs'))
- d->create
// create file in root file system (requires permissions at user OS level) local(f) = file handle => { #f->close }
- f->openWriteOnly('//output.txt')
// create directory in root file system (requires permissions at user OS level) local(d = dir('//docs'))
- d->create</lang>
LFE
<lang lisp> (: file write_file '"output.txt" '"Some data") (: file make_dir '"docs") (: file write_file '"/output.txt" '"Some data") (: file make_dir '"/docs") </lang>
Liberty BASIC
Filenames without drive and directory info. refer to the same directory as the LB program is running from.
Full pathnames including drive name and directory can be used- back-slash separated.
<lang lb>
nomainwin
open "output.txt" for output as #f close #f
result = mkdir( "F:\RC") if result <>0 then notice "Directory not created!": end
open "F:\RC\output.txt" for output as #f close #f
end </lang>
Lingo
Create an empty file in cwd:
<lang lingo>-- note: fileIO xtra is shipped with Director, i.e. an "internal" fp = xtra("fileIO").new() fp.createFile("output.txt")</lang>
Create empty file in root of current volume:
<lang lingo>-- note: fileIO xtra is shipped with Director, i.e. an "internal" pd = the last char of _movie.path -- "\" for win, ":" for mac _player.itemDelimiter = pd vol = _movie.path.item[1] fp = xtra("fileIO").new() fp.createFile(vol&pd&"output.txt")</lang>
Creating an empty directory requires a 3rd party xtra, but there are various free xtras that allow this. Here as example usage of Shell xtra:
<lang lingo>shell_cmd("mkdir Docs") -- in cwd, both win and mac shell_cmd("mkdir \Docs") -- win shell_cmd("mkdir /Docs") -- mac</lang>
Little
We are going to use /tmp instead the root.
<lang C>void create_file(string path) {
FILE f; unless (exists(path)) { unless (f = fopen(path, "w")){ die(path); } else { puts("file ${path} created"); fclose(f); } } else { puts("File ${path} already exists"); }
}
void create_dir(string path) {
unless (exists(path)) { unless(mkdir(path)) { //mkdir returns 0 on success, -1 on error puts("directory ${path} created"); } else { puts(stderr, "Error: directory ${path} not created"); } } else { puts("directory ${path} already exists"); }
}
create_file("output.txt"); create_file("/tmp/output.txt"); create_dir("docs"); create_dir("/tmp/docs");</lang>
Lua
Create File
<lang lua>io.open("output.txt", "w"):close() io.open("\\output.txt", "w"):close()</lang>
Create Directory
This solution sends the command to the OS shell.
<lang lua>os.execute("mkdir docs") os.execute("mkdir \\docs")</lang>
A more portable solution requires a library such as LuaFileSystem.
<lang lua>require "lfs" lfs.mkdir("docs") lfs.mkdir("/docs")</lang>
M2000 Interpreter
Create directory and a file in two directories. First we look if places are in Drive Fixed.
If ok then we look if directory exist and if not then we make it
We check the time stamp of directory
Next we make an empty file, and get the time stamp of it
We use a Sub as Task(). Subs can view everything in Module. This not hold for modules, a module can't see anything outside in either way, for parent module or child module, with one exception, a module in a Group can see other members in that group, if they are in same level, or public members from children groups, lower levels (upper levels are not aware for modules).
In subs we have to use Local to make local variables, that can be shadow local variables with same name in module.
We can use Try {Print str$(File.Stamp("output.txt"), "YYYY|MM|DD|hh:nn:ss")} so if file not exist nothing printed and error dropped from Try block.
Work nice in Ubuntu using Wine.
In Windows 10 we have to open M2000 environment (m2000.exe) with elevated privileges to have write access directly in root directory (so without it, we get error from task(RootDir$))
<lang M2000 Interpreter>
Module MakeDirAndFile {
Def WorkingDir$, RootDir$ If Drive$(Dir$)="Drive Fixed" Then WorkingDir$=Dir$ If Drive$("C:\")="Drive Fixed" Then RootDir$="C:\" if WorkingDir$<>"" Then task(WorkingDir$) If RootDir$<>"" then task(RootDir$) Dir User ' return to user directory Sub task(WorkingDir$) Dir WorkingDir$ If Not Exist.Dir("docs") then SubDir "docs" : Dir WorkingDir$ If Exist.Dir("docs") Then Print str$(File.Stamp("docs"), "YYYY|MM|DD|hh:nn:ss") Open "output.txt" For Output as #F Close #f If Exist("output.txt") Then Print str$(File.Stamp("output.txt"), "YYYY|MM|DD|hh:nn:ss") End Sub
} MakeDirAndFile </lang>
Maple
<lang Maple> FileTools:-Text:-WriteFile("output.txt", ""); # make empty file in current dir FileTools:-MakeDirectory("docs"); # make empty dir in current dir FileTools:-Text:-WriteFile("/output.txt", ""); # make empty file in root dir FileTools:-MakeDirectory("/docs"); # make empty dir in root dir </lang>
Mathematica / Wolfram Language
<lang Mathematica> SetDirectory@NotebookDirectory[]; t = OpenWrite["output.txt"] Close[t] s = OpenWrite[First@FileNameSplit[$InstallationDirectory] <> "\\output.txt"] Close[s]
(*In root directory*) CreateDirectory["\\docs"] (*In current operating directory*) CreateDirectory[Directory[]<>"\\docs"] (*"left<>right" is shorthand for "StringJoin[left,right]"*)
</lang>
MATLAB / Octave
<lang Matlab> fid = fopen('output.txt','w'); fclose(fid); fid = fopen('/output.txt','w'); fclose(fid); mkdir('docs'); mkdir('/docs');</lang>
Maxima
<lang maxima>f: openw("/output.txt"); close(f);
f: openw("output.txt"); close(f);
/* Maxima has no function to create directories, but one can use the underlying Lisp system */
- lisp (mapcar #'ensure-directories-exist '("docs/" "/docs/"))</lang>
MAXScript
<lang maxscript>-- Here f = createFile "output.txt" close f makeDir (sysInfo.currentDir + "\docs") -- System root f = createFile "\output.txt" close f makeDir ("c:\docs")</lang>
Mercury
<lang mercury>:- module create_file.
- - interface.
- - import_module io.
- - pred main(io::di, io::uo) is det.
- - implementation.
- - import_module dir.
main(!IO) :-
create_file("output.txt", !IO), create_file("/output.txt", !IO), create_dir("docs", !IO), create_dir("/docs", !IO).
- - pred create_file(string::in, io::di, io::uo) is det.
create_file(FileName, !IO) :-
io.open_output(FileName, Result, !IO), ( Result = ok(File), io.close_output(File, !IO) ; Result = error(Error), print_io_error(Error, !IO) ).
- - pred create_dir(string::in, io::di, io::uo) is det.
create_dir(DirName, !IO) :-
dir.make_single_directory(DirName, Result, !IO), ( Result = ok ; Result = error(Error), print_io_error(Error, !IO) ).
- - pred print_io_error(io.error::in, io::di, io::uo) is det.
print_io_error(Error, !IO) :-
io.stderr_stream(Stderr, !IO), io.write_string(Stderr, io.error_message(Error), !IO), io.nl(Stderr, !IO), io.set_exit_status(1, !IO).</lang>
Mirah
<lang mirah>import java.io.File
File.new('output.txt').createNewFile() File.new('docs').mkdir() File.new("docs#{File.separator}output.txt").createNewFile() </lang>
Modula-3
<lang modula3>MODULE FileCreation EXPORTS Main;
IMPORT FS, File, OSError, IO, Stdio;
VAR file: File.T;
BEGIN
TRY file := FS.OpenFile("output.txt"); file.close(); FS.CreateDirectory("docs"); file := FS.OpenFile("/output.txt"); file.close(); FS.CreateDirectory("/docs"); EXCEPT | OSError.E => IO.Put("Error creating file or directory.\n", Stdio.stderr); END;
END FileCreation.</lang>
Nanoquery
<lang Nanoquery>import Nanoquery.IO
f = new(File) f.create("output.txt") f.createDir("docs")
// in the root directory f.create("/output.txt") f.createDir("/docs") </lang>
Nemerle
<lang Nemerle>using System; using System.IO;
module CreateFile {
Main() : void { unless (File.Exists("output.txt")) File.Create("output.txt"); // here // returns a FileStream object which we're ignoring try { unless (File.Exists(@"\output.txt")) File.Create(@"\output.txt"); // root } catch { |e is UnauthorizedAccessException => Console.WriteLine( "Cannot create file in root directory without Administrator priveleges.") } unless (Directory.Exists("docs")) Directory.CreateDirectory("docs"); // returns a DirectoryInfo object which we're ignoring unless (Directory.Exists(@"\docs")) Directory.CreateDirectory(@"\docs"); // no Exception for directory creation }
}</lang>
NetRexx
<lang NetRexx>/* NetRexx */ options replace format comments java crossref symbols nobinary
fName = ; fName[0] = 2; fName[1] = '.' || File.separator || 'output.txt'; fName[2] = File.separator || 'output.txt' dName = ; dName[0] = 2; dName[1] = '.' || File.separator || 'docs'; dName[2] = File.separator || 'docs'
do
loop i_ = 1 to fName[0] say fName[i_] fc = File(fName[i_]).createNewFile() if fc then say 'File' fName[i_] 'created successfully.' else say 'File' fName[i_] 'aleady exists.' end i_
loop i_ = 1 to dName[0] say dName[i_] dc = File(dName[i_]).mkdir() if dc then say 'Directory' dName[i_] 'created successfully.' else say 'Directory' dName[i_] 'aleady exists.' end i_
catch iox = IOException
iox.printStackTrace
end
return </lang>
Nim
<lang nim>import os
open("output.txt", fmWrite).close() createDir("docs")
open(DirSep & "output.txt", fmWrite).close() createDir(DirSep & "docs")</lang>
<lang nim>import os const directories = ["/", "./"] for directory in directories:
open(directory & "output.txt", fmWrite).close() createDir(directory & "docs")</lang>
Objeck
<lang objeck> use IO;
bundle Default {
class FileExample { function : Main(args : String[]) ~ Nil { file := FileWriter->New("output.txt"); file->Close(); file := FileWriter->New("/output.txt"); file->Close(); Directory->Create("docs"); Directory->Create("/docs"); } }
} </lang>
Objective-C
<lang objc>NSFileManager *fm = [NSFileManager defaultManager];
[fm createFileAtPath:@"output.txt" contents:[NSData data] attributes:nil]; // Pre-OS X 10.5 [fm createDirectoryAtPath:@"docs" attributes:nil]; // OS X 10.5+ [fm createDirectoryAtPath:@"docs" withIntermediateDirectories:NO attributes:nil error:NULL];</lang>
OCaml
<lang ocaml># let oc = open_out "output.txt" in
close_out oc;;
- : unit = ()
- Unix.mkdir "docs" 0o750 ;; (* rights 0o750 for rwxr-x--- *)
- : unit = ()</lang>
(for creation in the filesystem root, replace the filenames by "/output.txt" and "/docs")
Oz
<lang oz>for Dir in ["/" "./"] do
File = {New Open.file init(name:Dir#"output.txt" flags:[create])}
in
{File close} {OS.mkDir Dir#"docs" ['S_IRUSR' 'S_IWUSR' 'S_IXUSR' 'S_IXGRP']}
end</lang>
PARI/GP
Creating an empty file in GP requires write1
rather than write
to avoid the automatic newline.
<lang parigp>write1("0.txt","")
write1("/0.txt","")</lang>
GP cannot, itself, create directories; for that, you would need PARI (where the solution would follow those in C) or system
:
<lang parigp>system("mkdir newdir")</lang>
Pascal
The Pascal & Delphi Standard Libraries support all of this functionality.
<lang pascal-delphi> program in out;
var
f : textfile;
begin
assignFile(f,'/output.txt'); rewrite(f); close(f); makedir('/docs'); assignFile(f,'/docs/output.txt'); rewrite(f); close(f);
end; </lang>
Perl
<lang perl>use File::Spec::Functions qw(catfile rootdir); { # here
open my $fh, '>', 'output.txt'; mkdir 'docs';
}; { # root dir
open my $fh, '>', catfile rootdir, 'output.txt'; mkdir catfile rootdir, 'docs';
};</lang>
Without Perl Modules
Current directory <lang perl>perl -e 'qx(touch output.txt)' perl -e 'mkdir docs'</lang>
Root directory <lang perl>perl -e 'qx(touch /output.txt)' perl -e 'mkdir "/docs"'</lang>
For comparison with Raku <lang perl>for my $prefix (qw( ./ / )) {
mkdir "${prefix}docs"; open my $FH, '>', "${prefix}docs/output.txt";
}</lang> Cleanup <lang perl>unlink $_ for qw(/docs/output.txt ./docs/output.txt); rmdir $_ for qw(/docs ./docs);</lang>
Phix
Copy of Euphoria, modified to display a warning when it cannot create a file in the system root (as such is typically banned on more recent operating systems) <lang Phix>integer fn
-- In the current working directory system("mkdir docs",2) fn = open("output.txt","w") close(fn)
-- In the filesystem root system("mkdir \\docs",2) fn = open("\\output.txt","w") if fn=-1 then
puts(1,"unable to create \\output.txt\n")
else
close(fn)
end if</lang>
PHP
<lang php><?php touch('output.txt'); mkdir('docs'); touch('/output.txt'); mkdir('/docs'); ?></lang>
PicoLisp
<lang PicoLisp>(out "output.txt") # Empty output (call 'mkdir "docs") # Call external (out "/output.txt") (call 'mkdir "/docs")</lang>
Pike
<lang pike>import Stdio;
int main(){
write_file("input.txt","",0100); write_file("/input.txt","",0100);
}</lang>
PL/I
<lang PL/I> open file (output) title ('/OUTPUT.TXT,type(text),recsize(100)' ); close file (output); </lang>
PowerShell
<lang powershell>New-Item output.txt -ItemType File New-Item \output.txt -ItemType File New-Item docs -ItemType Directory New-Item \docs -ItemType Directory</lang>
ProDOS
<lang ProDOS>makedirectory docs changedirectory docs makenewfile output.txt</lang>
PureBasic
<lang PureBasic>CreateFile(0,"output.txt"):CloseFile(0) CreateDirectory("docs") CreateFile(0,"/output.txt"):CloseFile(0) CreateDirectory("/docs")</lang>
Python
<lang python>import os for directory in ['/', './']:
open(directory + 'output.txt', 'w').close() # create /output.txt, then ./output.txt os.mkdir(directory + 'docs') # create directory /docs, then ./docs</lang>
Exception-safe way to create file:
<lang python>from __future__ import with_statement import os def create(directory):
with open(os.path.join(directory, "output.txt"), "w"): pass os.mkdir(os.path.join(directory, "docs"))
create(".") # current directory create("/") # root directory</lang>
R
<lang R>f <- file("output.txt", "w") close(f)
- it may fails and the exact syntax to achieve the root
- changes according to the operating system
f <- file("/output.txt", "w") close(f)
success <- dir.create("docs") success <- dir.create("/docs")</lang>
Racket
<lang Racket>#lang racket
(display-to-file "" "output.txt") (make-directory "docs") (display-to-file "" "/output.txt") (make-directory "/docs")</lang>
Raku
(formerly Perl 6) <lang perl6> for '.', -> $prefix {
mkdir "$prefix/docs"; open "$prefix/output.txt", :w;
} </lang>
Raven
<lang raven>"" as str str 'output.txt' write str '/output.txt' write 'docs' mkdir '/docs' mkdir</lang>
REBOL
<lang REBOL>; Creating in current directory:
write %output.txt "" make-dir %docs/
- Creating in root directory
write %/output.txt "" make-dir %/docs/ </lang>
Retro
There are no facilities in Retro to create directories.
<lang Retro> 'output.txt file:W file:open file:close '/output.txt file:W file:open file:close</lang>
REXX
This REXX version works under Microsoft Windows (any version). <lang rexx>/*REXX pgm creates a new empty file and directory; in curr dir and root.*/
do 2 /*perform three statements twice.*/ 'COPY NUL output.txt' /*copy a "null" (empty) file. */ 'MKDIR DOCS' /*make a directory (aka: folder).*/ 'CD \' /*change currect dir to the root.*/ end /*2*/ /*now, go and perform them again.*/ /*stick a fork in it, we're done.*/</lang>
Ring
<lang ring> system("mkdir C:\Ring\docs") fopen("C:\Ring\docs\output.txt", "w+") system("mkdir docs") fopen("output.txt", "w+") </lang>
Ruby
<lang ruby>['/', './'].each{|dir|
Dir.mkdir(dir + 'docs') # create '/docs', then './docs' File.open(dir + 'output.txt', 'w') {} # create empty file /output.txt, then ./output.txt
}</lang>
Run BASIC
<lang RunBasic>open "output.txt" for output as #f close #f
dirOk = mkdir( "f:\doc") if not(dirOk) then print "Directory not created!": end
open "f:\doc\output.txt" for output as #f close #f</lang>
Rust
<lang rust>use std::io::{self, Write}; use std::fs::{DirBuilder, File}; use std::path::Path; use std::{process,fmt};
const FILE_NAME: &'static str = "output.txt"; const DIR_NAME : &'static str = "docs";
fn main() {
create(".").and(create("/")) .unwrap_or_else(|e| error_handler(e,1));
}
fn create
(root: P) -> io::Result<File> where P: AsRef<Path> { let f_path = root.as_ref().join(FILE_NAME); let d_path = root.as_ref().join(DIR_NAME); DirBuilder::new().create(d_path).and(File::create(f_path)) } fn error_handler<E: fmt::Display>(error: E, code: i32) -> ! { let _ = writeln!(&mut io::stderr(), "Error: {}", error); process::exit(code) }</lang>
Scala
<lang scala>import java.io.File
object CreateFile extends App {
try { new File("output.txt").createNewFile() } catch { case e: Exception => println(s"Exception caught: $e with creating output.txt") } try { new File(s"${File.separator}output.txt").createNewFile() } catch { case e: Exception => println(s"Exception caught: $e with creating ${File.separator}output.txt") } try { new File("docs").mkdir() } catch { case e: Exception => println(s"Exception caught: $e with creating directory docs") } try { new File(s"${File.separator}docs").mkdir() } catch { case e: Exception => println(s"Exception caught: $e with creating directory ${File.separator}docs") }
}</lang>
Scheme
<lang scheme>(open-output-file "output.txt") (open-output-file "/output.txt")</lang> Results:
> file output.txt output.txt: empty > file /output.txt /output.txt: empty
I am not aware of any standard way of creating directories in Scheme.
Seed7
Seed7 uses a standard path representation to make paths operating system independent. In the standard path representation a / is used as path delimiter and drive letters like C: must be written as /c instead. Creating files and directories in a file system root may need privileges, so the program may fail, when it is started by a normal user.
<lang seed7>$ include "seed7_05.s7i";
include "osfiles.s7i";
const proc: main is func
local var file: aFile is STD_NULL; begin aFile := open("output.txt", "w"); close(aFile); mkdir("docs"); aFile := open("/output.txt", "w"); close(aFile); mkdir("/docs"); end func;</lang>
Under Windows each filesystem has its own root. Therefore you need to replace "/output.txt" and "/docs" with "/c/output.txt" and "/c/docs".
SenseTalk
<lang sensetalk>set the folder to "~/Desktop" put "" into file "docs/output.txt" set the folder to "/" put empty into file "/docs/output.txt"</lang> Or without defining a working directory: <lang sensetalk>put empty into file "~/Desktop/docs/output.txt" put "" into file "/docs/output.txt"</lang> Or using the Create command: <lang sensetalk>create file "output.txt" create folder "docs"</lang>
Sidef
<lang ruby># Here %f'output.txt' -> create; %d'docs' -> create;
- Root dir
Dir.root + %f'output.txt' -> create; Dir.root + %d'docs' -> create;</lang>
Slate
File creation locally: <lang slate>(File newNamed: 'output.txt') touch. (Directory current / 'output.txt') touch.</lang>
File creation at root: <lang slate>(File newNamed: '/output.txt') touch. (Directory root / 'output.txt') touch.</lang>
Smalltalk
Squeak has no notion of 'current directory' because it isn't tied to the shell that created it.
<lang smalltalk>(FileDirectory on: 'c:\') newFileNamed: 'output.txt'; createDirectory: 'docs'.</lang>
In GNU Smalltalk you can do instead:
<lang smalltalk>ws := (File name: 'output.txt') writeStream. ws close. Directory create: 'docs'.
ws := (File name: '/output.txt') writeStream. ws close. Directory create: '/docs'.</lang>
SNOBOL4
<lang SNOBOL4> output(.file,1,'output.txt'); endfile(1) ;* Macro Spitbol
- output(.file,1,,'output.txt'); endfile(1) ;* CSnobol
host(1,'mkdir docs')
output(.file,1,'/output.txt'); endfile(1) ;* Macro Spitbol
- output(.file,1,,'/output.txt'); endfile(1) ;* CSnobol
host(1,'mkdir /docs')
end</lang>
SQL PL
version 9.7 or higher.
With SQL PL: <lang sql pl> BEGIN
DECLARE UTL_FILE_HANDLER UTL_FILE.FILE_TYPE; DECLARE DIR_ALIAS_CURRENT VARCHAR(128); DECLARE DIR_ALIAS_ROOT VARCHAR(128); DECLARE DIRECTORY VARCHAR(1024); DECLARE FILENAME VARCHAR(255);
SET DIR_ALIAS_CURRENT = 'outputFileCurrent'; SET DIRECTORY = '/home/db2inst1/doc'; SET FILENAME = 'output.txt';
CALL UTL_DIR.CREATE_OR_REPLACE_DIRECTORY(DIR_ALIAS_CURRENT, DIRECTORY); SET UTL_FILE_HANDLER = UTL_FILE.FOPEN(DIR_ALIAS_CURRENT, FILENAME, 'a'); CALL UTL_FILE.FFLUSH(UTL_FILE_HANDLER); CALL UTL_FILE.FCLOSE(UTL_FILE_HANDLER);
SET DIR_ALIAS_ROOT = 'outputFileRoot'; SET DIRECTORY = '/doc';
CALL UTL_DIR.CREATE_OR_REPLACE_DIRECTORY(DIR_ALIAS_ROOT, DIRECTORY); SET UTL_FILE_HANDLER = UTL_FILE.FOPEN(DIR_ALIAS_ROOT, FILENAME, 'a'); CALL UTL_FILE.FFLUSH(UTL_FILE_HANDLER); CALL UTL_FILE.FCLOSE(UTL_FILE_HANDLER);
END @ </lang> The current directory notion does not exist in Db2. However, we can consider the home directory of the instance (in this case db2inst1) as current. For the directory under root, Db2 needs extra permissions to create a subdirectory at that level. Normally, that operation of creating a subdirectory at that level will raise an exception: "UTL_FILE.INVALID_OPERATION" SQLSTATE=58024.
Output:
db2 -td@ db2 => BEGIN ... db2 (cont.) => END @ DB20000I The SQL command completed successfully. db2 => !ls /doc @ output.txt db2 => !ls /home/db2inst1/doc @ output.txt
SQLite
<lang sqlite3> /*
- Use '/' for *nix. Use whatever your root directory is on Windows.
- Must be run as admin.
- /
.shell mkdir "docs"; .shell mkdir "/docs"; .output output.txt .output /output.txt </lang>
Standard ML
<lang sml>let val out = TextIO.openOut "output.txt" in
TextIO.closeOut out
end;
OS.FileSys.mkDir "docs";</lang>
(for creation in the filesystem root, replace the filenames by "/output.txt" and "/docs")
Stata
See the file command in Stata documentation. Note that Stata has other ways to store files: save to store a dataset in .dta format, or the various export commands to store a dataset as CSV, Excl, SAS XPORT 5 or XPORT 8 or dBase format.
<lang stata>file open f using output.txt, write replace file close f mkdir docs
file open f using \output.txt, write replace file close f mkdir \docs</lang>
Tcl
Assuming that we're supposed to create two files and two directories (one each here and one each in the file system root) and further assuming that the code is supposed to be portable, i.e. work on win, linux, MacOS (the task is really not clear):
<lang tcl>close [open output.txt w] close [open [file nativename /output.txt] w]
file mkdir docs file mkdir [file nativename /docs]</lang>
Toka
<lang toka>needs shell " output.txt" "W" file.open file.close " /output.txt" "W" file.open file.close
( Create the directories with permissions set to 777) " docs" &777 mkdir " /docs" &777 mkdir</lang>
TUSCRIPT
<lang tuscript> $$ MODE TUSCRIPT - create file ERROR/STOP CREATE ("output.txt",FDF-o,-std-) - create directory ERROR/STOP CREATE ("docs",project,-std-) </lang>
UNIX Shell
<lang bash>touch output.txt /output.txt # create both output.txt and /output.txt mkdir /docs mkdir docs # create both /docs and docs</lang>
<lang bash>touch {/,}output.txt # create both /output.txt and output.txt mkdir {/,}docs # create both /docs and docs</lang>
Ursa
<lang ursa>decl file f f.create "output.txt" f.createdir "docs"
- in the root directory
f.create "/output.txt" f.createdir "/docs" </lang>
VBA
<lang vb>Public Sub create_file()
Dim FileNumber As Integer FileNumber = FreeFile MkDir "docs" Open "docs\output.txt" For Output As #FreeFile Close #FreeFile MkDir "C:\docs" Open "C:\docs\output.txt" For Output As #FreeFile Close #FreeFile
End Sub</lang>
VBScript
<lang vb> Set objFSO = CreateObject("Scripting.FileSystemObject")
'current directory objFSO.CreateFolder(".\docs") objFSO.CreateTextFile(".\docs\output.txt")
'root directory objFSO.CreateFolder("\docs") objFSO.CreateTextFile("\docs\output.txt") </lang>
Vedit macro language
When closing a file, Vedit saves it only if it has been modified. Therefore, in order to create an empty file, we first insert a character in the file and then delete it. <lang vedit>// In current directory File_Open("input.txt") Ins_Char(' ') Del_Char(-1) Buf_Close() File_Mkdir("docs")
// In the root directory File_Open("/input.txt") Ins_Char(' ') Del_Char(-1) Buf_Close() File_Mkdir("/docs")</lang>
Visual Basic .NET
Platform: .NET
<lang vbnet> 'Current Directory IO.Directory.CreateDirectory("docs") IO.File.Create("output.txt").Close()
'Root
IO.Directory.CreateDirectory("\docs") IO.File.Create("\output.txt").Close()
'Root, platform independent
IO.Directory.CreateDirectory(IO.Path.DirectorySeparatorChar & "docs") IO.File.Create(IO.Path.DirectorySeparatorChar & "output.txt").Close()</lang>
Visual Objects
//Use Library System Library <lang visualfoxpro> DirMake(String2Psz("c:\docs")) FCreate("c:\docs\output.txt", FC_NORMAL) </lang>
Wren
To create a file in the root, assuming you have the necessary privileges, just change "output.txt" to "/output.txt" in the following script.
Wren does not currently support the creation of directories. <lang ecmascript>import "io" for File
// file is closed automatically after creation File.create("output.txt") {}
// check size System.print("%(File.size("output.txt")) bytes")</lang>
- Output:
0 bytes
X86 Assembly
<lang asm>
- syscall numbers for readability.
- ]
%define sys_mkdir 39 %define sys_creat 8
section .data fName db 'doc/output.txt',0 rfName db '/output.txt',0 dName db 'doc',0
err_msg db "Something went wrong! :[",0xa err_len equ $-err_msg
section .text global _start
_start:
nop mov ebx, dName ; Directory name mov eax, sys_mkdir ; Specify sys_mkdir call mov ecx, 0750o ; permission (rwxr-x---) int 0x80 ; Make kernel call
mov ebx, fName ; File name mov eax, sys_creat ; Specify sys_creat call mov ecx, 0640o ; permission (rw-r-----) int 0x80 ; Make kernel call test eax, eax ; eax AND eax js _ragequit ; If EAX is less than zero
; THEN Display Message Error
mov ebx, rfName ; File name Root mov eax, sys_creat ; Specify sys_creat call mov ecx, 0777o ; permission (rwxrwxrwx) int 0x80 ; Make kernel call cmp eax, 0 jle _exit ; IF EAX is less or equal than zero
; THEN jump to EXIT ; ELSE Display Message Error
_ragequit: mov edx, err_len ; Pass offset of the message error mov ecx, err_msg ; Pass the length of the message error mov eax, 4 ; Specify sys_write call mov ebx, 2 ; Specify File Descriptor 2: Error Output int 0x80 ; Make kernel call
_exit: push 0x1 mov eax, 1 ; Code for Exit Syscall push eax int 0x80 ; Make kernel call ret </lang>
XPL0
XPL0 does not currently create directories. To create a file in the root directory, assuming you have permission, insert a slash at the beginning, like this: /output.txt
<lang XPL0> int FD; FD:= FOpen("output.txt", 1); </lang>
Yabasic
<lang yabasic>open "output.txt" for writing as #1 close #1
system("mkdir " + "f:\docs") if open(2, "f:\docs\output.txt") then
print "Subdirectory or file already exists"
else
open "f:\docs\output.txt" for writing as #2 close #2
end if</lang>
zkl
Works on Unix and Windows <lang zkl>$ ls -l docs ls: cannot access docs: No such file or directory $ zkl zkl: fcn createOutputTxt(dir){ dir=dir+"/docs"; File.mkdir(dir); File(dir+"/output.txt","w") } Void zkl: createOutputTxt(".") File(./docs/output.txt) zkl: createOutputTxt("/") Stack trace for VM#1 ():
Cmd.createOutputTxt@mkdir addr:16 args(1) reg(0) Cmd.__constructor@createOutputTxt addr:9 args(0) reg(0) R startup.__constructor addr:2271 args(0) reg(1) ER startup.__constructor addr:2207 args(0) reg(22)
Exception thrown: IOError(File.mkdir(//docs): Permission denied) zkl: ^D $ ls -l docs total 0 -rw-r--r-- 1 craigd craigd 0 Oct 27 22:08 output.txt </lang>
ZX Spectrum Basic
The ZX Spectrum saves to a tape recorder and does not have subdirectories. Here we create an empty file named OUTPUT of zero bytes. We can use any start address, because the file is empty. Here we write zero bytes from address 16384:
<lang zxbasic>SAVE "OUTPUT" CODE 16384,0</lang>
- Programming Tasks
- File System Operations
- Simple
- 11l
- 4DOS Batch
- AArch64 Assembly
- Action!
- Ada
- Aikido
- Aime
- ALGOL 68
- APL
- AppleScript
- ARM Assembly
- Arturo
- AutoHotkey
- AWK
- Axe
- BASIC
- BaCon
- Commodore BASIC
- Batch File
- BBC BASIC
- Blue
- Bracmat
- C
- C sharp
- C++
- ChucK
- Clojure
- COBOL
- Common Lisp
- Component Pascal
- Crystal
- D
- Dc
- DCL
- Delphi
- E
- EchoLisp
- Elena
- Elixir
- Emacs Lisp
- Erlang
- ERRE
- Euphoria
- F Sharp
- Factor
- Fancy
- Forth
- Fortran
- FreeBASIC
- Friendly interactive shell
- FunL
- Gambas
- Go
- Groovy
- Haskell
- HicEst
- I
- Icon
- Unicon
- J
- Java
- JavaScript
- JCL
- Julia
- K
- Kotlin
- LabVIEW
- Lasso
- LFE
- Liberty BASIC
- Lingo
- Little
- Lua
- M2000 Interpreter
- Maple
- Mathematica
- Wolfram Language
- MATLAB
- Octave
- Maxima
- MAXScript
- Mercury
- Mirah
- Modula-3
- Nanoquery
- Nemerle
- NetRexx
- Nim
- Objeck
- Objective-C
- OCaml
- Oz
- PARI/GP
- Pascal
- Perl
- Phix
- PHP
- PicoLisp
- Pike
- PL/I
- PowerShell
- ProDOS
- PureBasic
- Python
- R
- Racket
- Raku
- Raven
- REBOL
- Retro
- REXX
- Ring
- Ruby
- Run BASIC
- Rust
- Scala
- Scheme
- Seed7
- SenseTalk
- Sidef
- Slate
- Smalltalk
- SNOBOL4
- SQL PL
- SQLite
- Standard ML
- Stata
- Tcl
- Toka
- TUSCRIPT
- UNIX Shell
- TI-83 BASIC/Omit
- TI-89 BASIC/Omit
- Befunge/Omit
- Ursa
- VBA
- VBScript
- Vedit macro language
- Visual Basic .NET
- Visual Objects
- SmileBASIC/Omit
- Wren
- X86 Assembly
- XPL0
- Yabasic
- Zkl
- ZX Spectrum Basic