Start from a main routine
You are encouraged to solve this task according to the task description, using any language you may know.
Some languages (like Gambas and Visual Basic) support two startup modes. Applications written in these languages start with an open window that waits for events, and it is necessary to do some trickery to cause a main procedure to run instead. Data driven or event driven languages may also require similar trickery to force a startup procedure to run.
- Task
Demonstrate the steps involved in causing the application to run a main procedure, rather than an event driven window at startup.
Languages that always run from main() can be omitted from this task.
6502 Assembly
This depends entirely on the hardware.
- Apple ][: type
"BRUN PROG"
and press enter - Commodore 64: type
"LOAD"*",8,1
and press enter. This is how programs on floppy disks are loaded. Commodore 64 cartridges bypass this step entirely and boot immediately. - NES/Famicom: Executes
JMP ($FFFC)
at the start automatically, thus entering the main program.
It should be noted that nothing needs to be called "main" but generally speaking the "main" program is whatever execution flows into at the start.
8086 Assembly
Whether a program runs automatically from main or needs to be called depends entirely on the hardware, but in MS-DOS you have to type the name of the program you wish to run.
C:\>prog.exe
Ada
In Ada, the "Main" procedure doesn't have to follow a special naming scheme. Any parameterless procedure will do.
with Ada.Text_IO;
procedure Foo is
begin
Ada.Text_IO.Put_Line("Bar");
end Foo;
ALGOL 68
An Algol 68 program consists of a sequence of declarations and expressions. The expressions are executed and so form the main program.
BEGIN
print( ( "Hello, World!", newline ) )
END
Arturo
In Arturo, code is always read and executed from the top to the bottom of the script.
If we need a main
function in any case, we can of course create it and call it.
main: function [][
print "Yes, we are in main!"
]
main
- Output:
Yes, we are in main!
AutoHotkey
AutoHotkey always starts at the top of the script. A main() function can be called from there, or event hooks set.
AWK
The awk language is data driven. However, it does support the use of begin blocks, so we could use one of those to provide us with a main startup procedure:
BEGIN {
# This is our main startup procedure
print "Hello World!"
}
BASIC
GWBASIC
As is well known, GWBASIC cannot refer to anything with a name. Also, does not require an executable program to have a main() procedure. However, as in the other instances, there's nothing to stop you creating a subprocess and then calling it by its line number to start the program:
10 'SAVE "MAIN",A
20 GOSUB 100 ' Main
30 END
100 ' Sub Main
110 CLS
120 PRINT "This is the Main sub!"
130 RETURN
QBasic
QBasic does not require an executable program to have a main() procedure. However, there's nothing to stop you creating one and then calling it to start the program:
SUB main
PRINT "Hello from main!"
END SUB
main
BASIC256
BASIC256 does not require an executable program to have a main() procedure. However, there's nothing to stop you creating one and then calling it to start the program:
subroutine main()
print "Hello from main!"
end subroutine
call main()
Run BASIC
Run BASIC does not require an executable program to have a main() procedure. However, there's nothing to stop you creating one and then calling it to start the program:
sub main
print "Hello from main!"
end sub
call main
True BASIC
True BASIC does not require an executable program to have a main() procedure. However, there's nothing to stop you creating one and then calling it to start the program:
SUB main
PRINT "Hello from main!"
END SUB
CALL main
END
Yabasic
Yabasic does not require an executable program to have a main() procedure. However, there's nothing to stop you creating one and then calling it to start the program:
sub main()
print "Hello from main!"
end sub
main()
C
Code execution in C always starts at main(). Macros make possible programs such as the one below, although it's not the best way to write C code.
#include<stdio.h>
#define start main()
int start
{
printf("Hello World !");
return 0;
}
Hello World !
Clojure
Use Leiningen. It will allow you to describe many aspects of your project, including which namespace's -main function it should invoke at startup. When you use the 'lein new app' template, it will generate and configure a -main function for you. You can edit the project.clj to modify :main if you wish to start from some other point. For more details, read the documentation.
Component Pascal
In BlackBox Componente Builder any exported procedure without paramenter (command) can be invoked through commanders (CTRL-q ModuleName.command)
MODULE MainProcedure;
IMPORT StdLog;
PROCEDURE Do*;
BEGIN
StdLog.String("From Do");StdLog.Ln
END Do;
PROCEDURE Main*;
BEGIN
StdLog.String("From Main");StdLog.Ln
END Main;
END MainProcedure.
Execute:
^Q MainProcedure.Do
^Q MainProcedure.Main
Output:
From Do From Main
EasyLang
proc main . .
print "Hello from main!"
.
main
ed
ed starts in interactive mode, reading commands from standard input. However, one can put commands into a file and pipe the file contents into ed, which makes it similar to the script/main function.
Erlang
When started Erlang enters a REPL (read-eval-print loop). To call a function called main in the module m you do: erl -run m main argument1 argument 2 ...
Factor
Use MAIN:
to specify the starting point of a runnable vocabulary.
USE: io
IN: example
: hello ( -- ) "Hello, world!" print ;
MAIN: hello
This is optional for scripts and interactive development, but required to deploy a Factor program as an executable binary.
Forth
Forth still runs the interpreter when given a file to include in order to compile the source, but you can avoid the interactive interpreter by invoking an entry point ("main") then calling BYE to exit.
include foo.fs
...
: main ... ;
main bye
This pattern is also used (e.g. GNU Forth) to interpret a Forth snippet from the command line.
$ gforth -e "2 2 + . bye"
Furthermore, professional Forth systems like PFE and SwiftForth have a means to make a "turnkey" application which omits the interactive interpreter, suitable for installing on a third-party system. The command would take an entry point and target executable name:
' main turnkey app.exe
FreeBASIC
FreeBASIC does not require an executable program to have a main() procedure. However, there's nothing to stop you creating one and then calling it to start the program:
' FB 1.05.0 Win64
Sub main()
Print "Hello from main!"
End Sub
main
Sleep
- Output:
Hello from main!
Gambas
In Gambas, to make an application startup from a main routine:
- Create a new module called MMain
- In the MMain module, create a public sub called Main as follows:
PUBLIC SUB Main()
' This is the start of the program
END
- Right click the MMain module, then select Startup class from the context menu
Go
In Go all executable programs must have a main package which includes a function called main() with no parameters nor return value.
However, execution doesn't necessarily begin with main() itself. If there are top-level functions called init() with no parameters nor return value, these are executed first in declaration order and they can call other functions including main() itself.
Here's an example which illustrates this behavior. Note that main() gets called twice, first by the second init() function and then automatically by the runtime.
In practice, init() functions are generally used to initialize top-level variables which cannot (or cannot easily) be initialized in situ rather than to pre-empt the main() function in this way.
package main
import "fmt"
var count = 0
func foo() {
fmt.Println("foo called")
}
func init() {
fmt.Println("first init called")
foo()
}
func init() {
fmt.Println("second init called")
main()
}
func main() {
count++
fmt.Println("main called when count is", count)
}
- Output:
first init called foo called second init called main called when count is 1 main called when count is 2
J
J, by default, starts an event loop.
If a file name is specified on the command line, that file is executed before dropping into the event loop.
Thus, if the script issues an exit command, that will happen before the event loop executes.
If you want the script to exit even when it hits an error, you can use an immex phrase, which will be the first thing executed by the event loop, before it prompts.
jq
A jq program consists of a (possibly empty) sequence of directives and function definitions followed by a single (but possibly compound) jq expression that is evaluated in the context of the prior definitions. The jq expression can take many forms, such as a single JSON value, or a pipeline of filters. In particular, it could be the invocation of a previously defined function named main as in this example:
def main:
"Hello, World!";
main
The jq interpreter has two modes of operation: a data-driven mode (the default) and an autonomous mode (corresponding to the `-n` command-line option). In general, in the data-driven mode, the expression at the end of the jq program is evaluated once for each input, so that in the above example, the "Hello, World!" string would be emitted once for each input.
By contrast, if the `-n` command-line option is specified, then a single JSON `null` would be presented to the final expression, so that in the above example, the string would be emitted just once.
Julia
If the program, julia, is executed via the command line without a program filename argument, it will enter its REPL (Read–Evaluate-Print-Loop) by default, without executing any user code until that is entered via the REPL command line. If, instead, Julia is started with a Julia program filename as argument, it will execute that program and, after that program terminates, exit without seeking any REPL input.
Kotlin
The version of Kotlin which targets the JVM always starts from the main(args: Array<String>) function unless it is running in REPL mode when it simply executes lines of executable code in the order presented. The REPL is started by typing, kotlinc, without any parameters at the command prompt. For example:
- Output:
Welcome to Kotlin version 1.1.1 (JRE 1.8.0_121-b13) Type :help for help, :quit for quit >>> println("Look no main!") Look no main! >>> :quit
Logtalk
Logtalk applications don't run a main procedure at startup by default but there are several ways to accomplish that. One of them is to include an initialization/1 in a source file. The argument of this directive is a goal that will be proved when the source file is compiled and loaded. For example:
:- initialization(main).
The initialization/1 can also be used within entities (objects and categories) to automatically run entity-specific initializations when the container source file is compiled and loaded. In alternative, it's usually possible to pass a goal as a command-line argument when running the application executable (the details depending on the backend Prolog compiler being used).
Mathematica /Wolfram Language
Mathematica automatically starts a REPL (read-eval-print loop), which is a kind of event loop. If that is not desired, pass -run on the command line. Note that if Mathematica is called via MathLink from within an external program, then the main loop has to be defined, which will usually differ from the standard one.
Nim
Nim does not require a procedure called "main" for program execution, but programmers are free to create a procedure with that name.
proc main() = echo "Hello World!" main()
Oforth
If Oforth loads a file and this file does not launch anything, nothing happens but file interpretation, and oforth leaves.
For instance if file1.of is :
: main(n)
"Sleeping..." println
n sleep
"Awake and leaving." println ;
- Output:
>oforth file1.of
Nothing happens because oforth has nothing to perform.
If Oforth loads a file and this file launchs a function or method, it will be interpretred (and so, performed), and oforth leaves.
With this file (for instance file2.of) :
: main(n)
"Sleeping..." println
n sleep
"Awake and leaving." println ;
10000 main
- Output:
>oforth file2.of Sleeping... Awake and leaving.
The function is performed.
Another way is to load a file and to give what to run into the command line parameters. For instance, using file1.of
- Output:
>oforth --P"10000 mysleep" file1.of Sleeping... Awake and leaving.
Of course, "main" as function name to launch is not required : every name is ok.
PARI/GP
GP scripts start from the top of the script. PARI code starts from the main function.
Pascal
Pascal programs are mostly compiled and run a 'main' procedure automatically, this procedure is not explicitly named main. Units (separate files of code without a main procedure) have initialisation code which also runs automatically.
Perl
Same as Raku.
BEGIN {...} # as soon as parsed
CHECK {...} # end of compile time
INIT {...} # beginning of run time
END {...} # end of run time
Phix
Any code which is not part of a routine is considered 'main' code. If you want a main()
you have to explicitly invoke it.
procedure main() ... end procedure main()
PicoLisp
PicoLisp automatically starts a REPL (read-eval-print loop), which is a kind of event loop. If that is not desired, call (wait), or pass -wait on the command line. Per convention, the GUI event loop is started by calling (go), or by passing -go on the command line.
Processing
By default, Processing executes the given list of commands with no required main function/method. This is called "immediate mode."
println("hello world");
line(0, 0, width, height);
Most of the Processing API can be used in immediate mode--however, it has no event loop, so it cannot support animation, interaction (such as keyboard or mouse) or time-based media such as audio or video. Further, this mode cannot define new functions/methods, or classes. For example, this is invalid:
void hello() {
println("hello world");
}
hello();
In order to define functions or use these language features, setup() and/or draw() must be defined in a Processing sketch. These serve as the equivalent of a main() entrypoint. For example, this is a valid sketch:
void setup() {
hello();
}
void hello() {
println("hello world");
}
setup() -- or draw() if there is no setup() -- acts as an entrypoint to the sketch, with draw() also serving as an event loop that by default is called at 60fps.
PureBasic
PureBasic is procedural and any code which is not part of a procedure is considered 'main' code. This code also does not use any explicit syntax (i.e. a 'main' module) to cause it to execute and it always executes first.
Quackery
To run the Quackery shell (i.e. REPL) type quackery
in the OS monitor app.
To run a Quackery program from the monitor, type quackery [program-name].qky
To run a Quackery program from the Quackery shell, type $ "[program-name].qky" loadfile
.
To run the Quackery shell from a Quackery program, include the word shell
in the program.
To run a Quackery program from within a Quackery program, include the phrase $ "[program-name].qky" loadfile
in the program.
To run a Quackery program during compilation of a Quackery program, include the phrase [ $ "[program-name].qky" loadfile ] now!
in the program.
To run the Quackery shell from within the Quackery shell, type shell
.
To run the Quackery shell during compilation within the Quackery shell, type [ shell ] now!
.
Other variations are possible. To illustrate this, here is a program which, if typed in in the shell, or included in a .qky
file, will temporarily suspend compilation to interact with the user. constant
includes the functionality of now!
but treats the top item of the stack as if it were part of the program text.
[ say "Please use the shell to calculate a value" cr
say "and leave it on the stack. Type 'leave' when" cr
say "you have done this." cr
shell ] constant is my-value
Demonstrating this in the Quackery shell. Text after the duck's head prompt and the continuation ellipses is entered by the user.
> quackery Welcome to Quackery. Enter "leave" to leave the shell. Building extensions. /O> [ say "Please use the shell to calculate a value" cr ... say "and leave it on the stack. Type 'leave' when" cr ... say "you have done this." cr ... shell ] constant is my-value ... Please use the shell to calculate a value and leave it on the stack. Type 'leave' when you have done this. /O> 123 456 + ... leave ... Be seeing you. Stack empty. /O> my-value echo ... 579 Stack empty. /O> leave ... Auf wiedersehen. >
Racket
Racket can be configured to run a REPL, run a main function, or just run top-level expressions. A main function can be run by executing racket -tm program.rkt.
#/usr/bin/env racket -tm
#lang racket
(provide main)
(define (main . args) (displayln "Hello World!"))
Raku
(formerly Perl 6) When executed with the standard setting, Raku code always runs the mainline code automatically, followed by the MAIN function if you have one. However, it's possible to start up with an alternate setting that might want to create its own event loop or MAIN. In such cases you can always capture control at various phases with blocks that we call "phasers":
BEGIN {...} # as soon as parsed
CHECK {...} # end of compile time
INIT {...} # beginning of run time
END {...} # end of run time
REXX
The closest REXX has to this type of behavior is when a REXX program starts,
then executes (as per this discusion, say) an XEDIT session, and
then re-directs commands to the XEDIT session via the ADDRESS command.
XEDIT has native (built-in) support for the REXX language as a macro language.
The XEDIT mentioned above runs on the VM/CMS operating system.
/*REXX*/
address 'XEDIT'
.
.
.
[XEDIT commands here.]
.
.
.
Ring
func Main
see "Hello World!" + nl
Output:
Hello World!
Ruby
Every Ruby source file can declare blocks of code to be run as the file is being loaded (the BEGIN blocks) and after the program has finished executing (the END blocks). BEGIN and END Blocks
BEGIN {
# begin code
}
END {
# end code
}
A program may include multiple BEGIN and END blocks. BEGIN blocks are executed in the order they are encountered. END blocks are executed in reverse order.
Scala
No kidding and trickery
In Scala there are two concepts not available in another OO-languages e.g. Java. The concepts are object
and trait
. Both cannot have parameters. object
's are singletons (one and only one instance of a parameter-less class) and are static. Exactly the same as a main
. By use of the trait App
a main method is preprogrammed and brought in an object
which can be called on the command-line. There are more the one different object
's possible each can be called by his object name on the command-line. In the trait executionStart
field is initialized with the starting time. By submitting an -Dscala.time
argument on the command-line the execution time can be reported. The field executionStart
can also programmatically used.
- Example:
object PrimaryMain extends App {
Console.println("Hello World: " + (args mkString ", "))
}
object MainTheSecond extends App {
Console.println("Goodbye, World: " + (args mkString ", "))
}
sed
A sed
program repeats itself for each line of input, but your program can begin with commands that address line 1. (This requires that your input has a line 1. If your input is empty file, like /dev/null
, then it is impossible to run commands.)
# This code runs only for line 1.
1 {
i\
Explain-a-lot processed this file and
i\
replaced every period with three exclamation points!!!
i\
}
# This code runs for each line of input.
s/\./!!!/g
Seed7
Code execution in Seed7 always starts with main. This holds for text programs:
$ include "seed7_05.s7i";
const proc: main is func
begin
writeln("hello world");
end func;
And for grahical programs:
$ include "seed7_05.s7i";
include "draw.s7i";
include "keybd.s7i";
const proc: main is func
begin
screen(200, 200);
KEYBOARD := GRAPH_KEYBOARD;
ignore(getc(KEYBOARD));
end func;
Tcl
If a Tcl interpreter (such as tclsh or wish) is started without a script file, it will (typically) provide an interactive command prompt that supports read-eval-print-loop functionality. However, if a script file is supplied the file is executed and then the program either exits or, if Tk is in use, the application waits, servicing events, until the last window is deleted.
Visual Basic
In Visual Basic to make an application startup from a main routine:
- Create a new module called MMain.bas
- Create a new subroutine in the new module as follows:
SUB Main()
' This is the start of the program
END
- From the menu in the application development environment, choose: File, Project Options.
- Ensure that MMain.bas is selected, by clicking in the list
- From the pulldown list, choose "Sub Main"
- Click the OK button.
Visual Basic .NET
VB.NET console apps always start in Sub Main, but Windows Forms apps use the application framework by default, meaning the compiler generates a Sub Main that shows a selected startup form. To parse command-line parameters or cancel the application startup, either the appropriate methods in the MyApplication class can be overridden, or the application framework can be disabled, in which case it is allowed to set the startup object to be a method.
MyApplication
Comments copied from the metadata of System.Windows.Forms.dll.
OnInitialize can cancel startup by returning false, and the handler for Startup can cancel startup by setting e.Cancel to True.
Imports System.Collections.ObjectModel
Imports Microsoft.VisualBasic.ApplicationServices
Namespace My
' The following events are available for MyApplication:
' Startup: Raised when the application starts, before the startup form is created.
' Shutdown: Raised after all application forms are closed. This event is not raised if the application terminates abnormally.
' UnhandledException: Raised if the application encounters an unhandled exception.
' StartupNextInstance: Raised when launching a single-instance application and the application is already active.
' NetworkAvailabilityChanged: Raised when the network connection is connected or disconnected.
Partial Friend Class MyApplication
'''<summary>Sets the visual styles, text display styles, and current principal for the main application thread
'''(if the application uses Windows authentication), and initializes the splash screen, if defined.</summary>
'''<param name="commandLineArgs">A <see cref="ReadOnlyCollection(Of T)" /> of <see langword="String" />,
'''containing the command-line arguments as strings for the current application.</param>
'''<returns>A <see cref="T:System.Boolean" /> indicating if application startup should continue.</returns>
Protected Overrides Function OnInitialize(commandLineArgs As ReadOnlyCollection(Of String)) As Boolean
Console.WriteLine("oninitialize; args: " & String.Join(", ", commandLineArgs))
Return MyBase.OnInitialize(commandLineArgs)
End Function
' WindowsFormsApplicationBase.Startup occurs "when the application starts".
Private Sub MyApplication_Startup(sender As Object, e As StartupEventArgs) Handles Me.Startup
Console.WriteLine("startup; args: " & String.Join(", ", e.CommandLine))
End Sub
'''<summary>Provides the starting point for when the main application is ready to start running, after the
'''initialization is done.</summary>
Protected Overrides Sub OnRun()
Console.WriteLine("onrun")
MyBase.OnRun()
End Sub
End Class
End Namespace
- Output — for input
foo /bar baz "visual basic"
:
oninitialize; args: foo, /bar, baz, visual basic startup; args: foo, /bar, baz, visual basic onrun
Sub Main
In Visual Studio:
In project properties, create a Sub Main of the appropriate signature, uncheck 'Enable application framework', and set 'Startup object' to 'Sub Main'.
By editing vbproj:
Change
<MyType>WindowsForms</MyType>
to
<MyType>WindowsFormsWithCustomSubMain</MyType>
and
<StartupObject>[DEFAULT NAMESPACE OF APPLICATION].My.MyApplication</StartupObject>
to
<StartupObject>Sub Main</StartupObject>
Main can choose to not call Application.Run, in which case no form is created.
Module Main
Sub Main(args As String())
Console.WriteLine("main; args:" & String.Join(", ", args))
Application.Run(New Form1())
End Sub
End Module
- Output — for input
foo /bar baz "visual basic"
:
main; args:foo, /bar, baz, visual basic
V (Vlang)
main() is the usual entry point for a program.
fn main() {
println("hello world")
}
However, this can be skipped in one file programs, allowing Vlang to be used like a script.
println("hello world")
Wren
Wren doesn't have (or need) a main function. Scripts just run from top to bottom (after a bytecode compilation stage).
However, it's easy enough to create a main function and call that to start execution of the script.
var main = Fn.new {
System.print("Hello from the main function.")
}
main.call()
- Output:
Hello from the main function.
XBasic
Applications in XBasic always start from a Sub Main called FUNCTION Entry()
.
Nevertheless, to make an application start from a main routine:
- Create a new module called MMain
- Create a new function in the new module as follows:
FUNCTION main ()
'This is the beginning of the program
END FUNCTION
Press F1 to start the application
PROGRAM "Start from a main routine"
DECLARE FUNCTION Entry ()
DECLARE FUNCTION main ()
FUNCTION Entry ()
main ()
END FUNCTION
FUNCTION main ()
PRINT "Hello from main!"
END FUNCTION
END PROGRAM
XPL0
XPL0 programs are normally compiled and run from a main procedure, although this procedure is not explicitly named 'main'. It is possible to compile procedures without a main procedure that are later linked to a module with a main procedure. This feature was used frequently on old, slow 6502-based computers, such as the Apple II.
Z80 Assembly
This depends entirely on the hardware. WinAPE (an Amstrad CPC emulator) can run a program by typing call &addr
where addr
is the operand of the org
directive at the beginning of the source document.
In your source code:
org &8000
At the Amstrad CPC terminal, type this:
call &8000
zkl
In zkl there is no main per se, the constructor of the top most enclosing class (usually the file as files define a class) is run. This remains the same even when a gui front end is pasted on.
file foo.zkl:
"Hello".println()
forms an anonymous class whose constructor is a function with the above code. "zkl foo" does the expected.
ZX Spectrum Basic
On the ZX Spectrum, there is no main function as such. However a saved program can be made to start running from a particular line number by providing the line number as a parameter to the save command. The following example will save the program in memory so that it starts running from line 500:
SAVE "MYPROG" LINE 500: REM For a program with main code starting at line 500
- Programming Tasks
- Solutions by Programming Task
- 6502 Assembly
- 8086 Assembly
- Ada
- ALGOL 68
- Arturo
- AutoHotkey
- AWK
- BASIC
- GWBASIC
- QBasic
- BASIC256
- Run BASIC
- True BASIC
- Yabasic
- C
- Clojure
- Component Pascal
- EasyLang
- Ed
- Erlang
- Factor
- Forth
- FreeBASIC
- Gambas
- Go
- J
- Jq
- Julia
- Kotlin
- Logtalk
- Mathematica
- Wolfram Language
- Nim
- Oforth
- PARI/GP
- Pascal
- Perl
- Phix
- Phix/basics
- PicoLisp
- Processing
- PureBasic
- Quackery
- Racket
- Raku
- REXX
- Ring
- Ruby
- Scala
- Sed
- Seed7
- Tcl
- Visual Basic
- Visual Basic .NET
- V (Vlang)
- Wren
- XBasic
- XPL0
- Z80 Assembly
- Zkl
- ZX Spectrum Basic
- Axe/Omit
- BBC BASIC/Omit
- Bc/Omit
- Brlcad/Omit
- C sharp/Omit
- C++/Omit
- D/Omit
- Dc/Omit
- F Sharp/Omit
- GUISS/Omit
- Haskell/Omit
- Java/Omit
- NetRexx/Omit
- Plain English/Omit
- Python/Omit
- Rust/Omit
- Swift/Omit
- UNIX Shell/Omit
- XPL0/Omit
- Zkl/Omit
- Basic language learning
- Initialization