Address of a variable
Demonstrate how to get the address of a variable and how to set the address of a variable.
![Task](http://static.miraheze.org/rosettacodewiki/thumb/b/ba/Rcode-button-task-crushed.png/64px-Rcode-button-task-crushed.png)
You are encouraged to solve this task according to the task description, using any language you may know.
Basic Data Operation
This is a basic data operation. It represents a fundamental action on a basic data type.
You may see other such operations in the Basic Data Operations category, or:
Integer Operations
Arithmetic |
Comparison
Boolean Operations
Bitwise |
Logical
String Operations
Concatenation |
Interpolation |
Comparison |
Matching
Memory Operations
Pointers & references |
Addresses
- Task
360 Assembly
Get the Address
To get the address of a variable, use LA
(load address) instead of L
(load):
LA R3,I load address of I
...
I DS F
Set the Address
To set a variable dynamically at the same address of an other variable, use a DSECT
(dummy section):
USING MYDSECT,R12
LA R12,I set @J=@I
L R2,J now J is at the same location as I
...
I DS F
MYDSECT DSECT
J DS F
6502 Assembly
When programming in assembly language yourself, generally the addresses of variables are known in advance and chosen by the programmer rather than dynamically determined by the compiler. Loading values from RAM into memory requires the programmer to specify the address as the operand. This is true for zero-page memory, absolute memory addresses, and memory-mapped ports whose location is defined by the hardware manufacturer. Typically, the assembly programmer will use labels to ease this process, which get converted to memory addresses automatically when the program is assembled.
;;;;;;; zero page RAM memory addresses
CursorX equ $00
CursorY equ $01
temp equ $02
;;;;;;; memory-mapped hardware registers
BorderColor equ $D020
Joystick1 equ $DC01
Joystick2 equ $DC00
Rather than setting the address of a variable, in assembly the programmer stores a calculated quantity in an address. The terms "memory address" and "variable" are often used interchangably.
LDA #$20 ; load a constant into the accumulator
CLC
ADC #$50
ASL
SBC #$30 ; do some math
STA temp ; store the result in a temp variable (really a zero-page memory address).
6502 assemblers treat a number without a # in front as a memory address.
LDA #$30 ;load into the accumulator the constant value 0x30
LDA $30 ;load into the accumulator the value stored at memory address 0x0030.
The only exception to this rule is when defining bytes. These do not have # in front, but are treated as constants nonetheless:
byte $30,$20,$10,$00 ;these are constant numeric values, not memory addresses.
68000 Assembly
When programming in assembly language yourself, generally the addresses of variables are known in advance and chosen by the programmer rather than dynamically determined by the compiler. Therefore you pretty much always know a variable's address at all times.
UserRam equ $100000
Cursor_X equ UserRam ;$100000, byte length
Cursor_Y equ UserRam+1 ;$100001, byte length
SixteenBitData equ UserRam+2 ;$100002, word length (VASM doesn't allow labels to begin with numbers.)
ThirtyTwoBitData equ UserRam+4 ;$100004, long length
;GET THE ADDRESS
LEA ThirtyTwoBitData,A0 ;load $100004 into A0.
Setting a variable to an address is as simple as storing a desired value in memory. Assembly languages in general do not have automated memory management, so it is important to manage your memory well.
MOVE.L #$11223344,D0
MOVE.L D0,(A0) ; store D0 into ThirtyTwoBitData ($100004)
; HEXDUMP OF $100004:
; $100004: $11
; $100005: $22
; $100006: $33
; $100007: $44
8086 Assembly
When programming in assembly language yourself, generally a variable's address is determined in advance by the programmer. The 8086 differs compared to other machines of its era, where the actual numeric value of the address is not needed to get or set the address of a desired variable. In exchange, a little more work needs to be done to store or retrieve values to/from memory.
Get The Address
.model small
.stack 1024
.data
UserRam 256 DUP (0) ;define the next 256 bytes as user RAM, initialize them all to zero.
.code
mov ax, seg UserRam ;load into AX the segment where UserRam is stored.
mov es, ax ;load that value into the Extra Segment register
mov ax, offset UserRam ;load into AX the address of UserRam
mov di, ax ;load that value into the destination index register
The actual numeric value of the address isn't needed, as the label system takes care of that for us. A memory dump routine can show the contents of es:di
, displaying the actual memory location.
Set The Address
Like with other assembly languages, the terms "variable" and "memory address" are often interchangeable. Setting a variable to an address is just storing a value into memory. After the setup above has taken place, the programmer can store numbers into memory.
mov ax, 0FFFFh
mov [es:di],ax ;store 0xFFFF into the base address of UserRam.
Alternatively, this would also work:
.model small
.stack 1024
.data
UserRam 256 DUP (0) ;define the next 256 bytes as user RAM, initialize them all to zero.
.code
mov ax, @data ; load the data segment into ax
mov ds,ax ; point the data segment register to the data segment.
; (The 8086 can only load segment registers from ax, bx, cx, dx, or the pop command)
mov ax, 0FFFFh ; load the number 65535 (or -1 if you prefer) into ax.
mov word ptr [ds:UserRam] ; store this quantity in user ram.
AArch64 Assembly
/* ARM assembly AArch64 Raspberry PI 3B */
/* program adrvar.s */
/*************************************/
/* Constantes */
/*************************************/
.equ STDOUT, 1
.equ WRITE, 64
.equ EXIT, 93
/*************************************/
/* Initialized data */
/*************************************/
.data
szMessage: .asciz "Hello. \n" // message
szRetourLigne: .asciz "\n"
qValDeb: .quad 5 // value 5 in array of 8 bytes
/*************************************/
/* No Initialized data */
/*************************************/
.bss
qValeur: .skip 8 // reserve 8 bytes in memory
/*************************************/
/* Program code */
/*************************************/
.text
.global main
main:
ldr x0,=szMessage // adresse of message short program
bl affichageMess // call function
// or
ldr x0,qAdrszMessage // adresse of message big program (size code > 4K)
bl affichageMess // call function
ldr x1,=qValDeb // adresse of variable -> x1 short program
ldr x0,[x1] // value of iValdeb -> x0
ldr x1,qAdriValDeb // adresse of variable -> x1 big program
ldr x0,[x1] // value of iValdeb -> x0
/* set variables */
ldr x1,=qValeur // adresse of variable -> x1 short program
str x0,[x1] // value of x0 -> iValeur
ldr x1,qAdriValeur // adresse of variable -> x1 big program
str x0,[x1] // value of x0 -> iValeur
/* end of program */
mov x0,0 // return code
mov x8,EXIT // request to exit program
svc 0 // perform the system call
qAdriValDeb: .quad qValDeb
qAdriValeur: .quad qValeur
qAdrszMessage: .quad szMessage
qAdrszRetourLigne: .quad szRetourLigne
/******************************************************************/
/* String display with size compute */
/******************************************************************/
/* x0 contains string address (string ended with zero binary) */
affichageMess:
stp x0,x1,[sp,-16]! // save registers
stp x2,x8,[sp,-16]! // save registers
mov x2,0 // size counter
1: // loop start
ldrb w1,[x0,x2] // load a byte
cbz w1,2f // if zero -> end string
add x2,x2,#1 // else increment counter
b 1b // and loop
2: // x2 = string size
mov x1,x0 // string address
mov x0,STDOUT // output Linux standard
mov x8,WRITE // code call system "write"
svc 0 // call systeme Linux
ldp x2,x8,[sp],16 // restaur 2 registres
ldp x0,x1,[sp],16 // restaur 2 registres
ret // retour adresse lr x30
Action!
PROC Main()
BYTE v=[123]
PrintF("Value of variable: %B%E",v)
PrintF("Address of variable: %H%E",@v)
RETURN
- Output:
Screenshot from Atari 8-bit computer
Value of variable: 123 Address of variable: $249A
Ada
Get The Address
The_Address : System.Address;
I : Integer;
The_Address := I'Address;
Set The Address
Set the address of a variable to address A100 in hexadecimal
I : Integer;
for I'Address use 16#A100#;
Set the address of one variable to the address of another variable, creating an overlay.
I : Integer;
J : Integer;
for I'Address use J'Address;
ALGOL 68
Basically ALGOL 68 refuses to let the programmer access the memory directly. The language does allow "references" any variables. These references are effectively the address a particular variable. But the value of the actual address is not available for printing or any arithmetic.
[4]INT test := (222,444,666,888);
REF INT reference := test[3];
REF INT(reference) := reference + 111;
print(("test value is now: ",test))
- Output:
test value is now: +222 +444 +777 +888
The other reason specific addresses are using in languages like C to manipulate devices. For this purpose site are expected to implement channels for their programmers to use. To quote the ALGOL 68 Revised Report: A "channel" corresponds to one or more physical devices (e.g., a card reader, a card punch or a line printer, or even to a set up in nuclear physics the results of which are collected by the computer), or to a filestore maintained by the operating system[1].
To establish a channel with such a device there is a special standard procedure:
PROC establish = (REF FILE file, STRING idf, CHANNEL chan, INT p, l, c) INT: ~
Where the idf string is text describing which device to open, and possibly options. And chan is the actual device type. Standard CHANNELs in ALGOL 68 are stand in channel, stand out channel, and stand back channel. These determine the type of the pre opened stdio FILEs stand in, stand out, and stand back. A site would be expected to implement their own CHANNELs for network connections, database queries and particle accelerators etc.
Applesoft BASIC
Get the address
Get the address of the last variable used.
N = N : PRINT PEEK (131) + PEEK (132) * 256
Get (find) the address of a function.
0 DEF FN F(X) = 0
1 FOR A = PEEK(105) + PEEK(106) * 256 TO PEEK(107) + PEEK(108) * 256 STEP 7 : IF PEEK(A) <> ASC("F") + 128 OR PEEK(A + 1) <> 0 THEN NEXT A : A = 0 : PRINT "FN F NOT FOUND"
2 IF A THEN PRINT A
Set the address
Set the address where variables are stored, but clears all variables.
LOMEM: 4096
I% = I% : PRINT PEEK (131) + PEEK (132) * 256
Set the address and length of a string.
S$ = "HELLO" : POKE 768, PEEK (131) : POKE 769, PEEK (132) : A = PEEK(768) + PEEK(769) * 256
PRINT S$ : PRINT A "- " PEEK(A) " " PEEK(A + 1) + PEEK(A + 2) * 256
POKE 768, ASC("H") : POKE 769, ASC("I") : POKE A, 2: POKE A + 1, 0 : POKE A + 2, 3
PRINT S$ : PRINT A "- " PEEK(A) " " PEEK(A + 1) + PEEK(A + 2) * 256
Set the address of a function.
0 DEF FN F(X) = 1
1 DEF FN B(X) = 2
2 N$ = "F" : GOSUB 8 : FA = A
3 N$ = "B" : GOSUB 8 : BA = A
4 PRINT FN F(0)
5 POKE FA, PEEK(BA) : POKE FA + 1, PEEK(BA + 1)
6 PRINT FN F(0)
7 END
8 FOR A = PEEK(105) + PEEK(106) * 256 TO PEEK(107) + PEEK(108) * 256 STEP 7 : IF PEEK(A) = ASC(LEFT$(N$,1)) + 128 AND PEEK(A + 1) = ASC(MID$(N$ + CHR$(0), 2, 1)) THEN A = A + 2 : RETURN
9 NEXT A : PRINT "FN " N$ " NOT FOUND"
Argile
Get the address
use std, array (: array.arg also defines pointer operators :)
let var = 42
let ptr = &var (: value of ptr is address of var :)
print var (: prints 42 :)
(*ptr)++ (: increments value pointed by ptr :)
print var (: prints 43 :)
Set the address
Since we cannot set address of a variable, we use a macro that returns a reference.
use std, array
=:mac:= -> int& { * (0x400000 as int*) }
printf "%x\n" mac (: may crash depending on operating system :)
ARM Assembly
/* ARM assembly Raspberry PI */
/* program adrvar.s */
/* Constantes */
.equ STDOUT, 1
.equ WRITE, 4
.equ EXIT, 1
/* Initialized data */
.data
szMessage: .asciz "Hello. \n " @ message
szRetourLigne: .asciz "\n"
iValDeb: .int 5 @ value 5 in array of 4 bytes
/* No Initialized data */
.bss
iValeur: .skip 4 @ reserve 4 bytes in memory
.text
.global main
main:
ldr r0,=szMessage @ adresse of message short program
bl affichageMess @ call function
@ or
ldr r0,iAdrszMessage @ adresse of message big program (size code > 4K)
bl affichageMess @ call function
ldr r1,=iValDeb @ adresse of variable -> r1 short program
ldr r0,[r1] @ value of iValdeb -> r0
ldr r1,iAdriValDeb @ adresse of variable -> r1 big program
ldr r0,[r1] @ value of iValdeb -> r0
/* set variables */
ldr r1,=iValeur @ adresse of variable -> r1 short program
str r0,[r1] @ value of r0 -> iValeur
ldr r1,iAdriValeur @ adresse of variable -> r1 big program
str r0,[r1] @ value of r0 -> iValeur
/* end of program */
mov r0, #0 @ return code
mov r7, #EXIT @ request to exit program
swi 0 @ perform the system call
iAdriValDeb: .int iValDeb
iAdriValeur: .int iValeur
iAdrszMessage: .int szMessage
iAdrszRetourLigne: .int szRetourLigne
/******************************************************************/
/* affichage des messages avec calcul longueur */
/******************************************************************/
/* r0 contient l adresse du message */
affichageMess:
push {fp,lr} /* save des 2 registres */
push {r0,r1,r2,r7} /* save des autres registres */
mov r2,#0 /* compteur longueur */
1: /*calcul de la longueur */
ldrb r1,[r0,r2] /* recup octet position debut + indice */
cmp r1,#0 /* si 0 c est fini */
beq 1f
add r2,r2,#1 /* sinon on ajoute 1 */
b 1b
1: /* donc ici r2 contient la longueur du message */
mov r1,r0 /* adresse du message en r1 */
mov r0,#STDOUT /* code pour écrire sur la sortie standard Linux */
mov r7, #WRITE /* code de l appel systeme 'write' */
swi #0 /* appel systeme */
pop {r0,r1,r2,r7} /* restaur des autres registres */
pop {fp,lr} /* restaur des 2 registres */
bx lr /* retour procedure */
Arturo
x: 2
xInfo: info.get 'x
print [
"address of x:" xInfo\address
"->" from.hex xInfo\address
]
- Output:
address of x: 0x109EAC228 -> 4461347368
Astro
var num = 12
var pointer = ptr(num) # get pointer
print pointer # print address
@unsafe # bad idea!
pointer.addr = 0xFFFE # set the address
AutoHotkey
Getting or setting the address of a variable is not supported as a builtin function. However, you can get the address of contents pointed to by the variable structure var
msgbox % &var
Axe
Axe supports getting the address of a variable using the degree symbol:
°A→B
.B now contains the address of A
Axe does not support setting the address of a variable directly. However, it does support setting the value of a variable and then dereferencing it:
1234→A
1→{A}
This should usually be avoided because TI-OS does not use virtual memory. Writing to arbitrary memory locations can affect the stability of the operating system.
BaCon
'---get a variable's address
LOCAL x TYPE long
PRINT ADDRESS(x)
BASIC
Many BASICs, especially older flavors like QuickBASIC, lack the ability to set a variable's address (and indeed, they pretty much all lack the ability to work with pointers in any fashion).
'get a variable's address:
DIM x AS INTEGER, y AS LONG
y = VARPTR(x)
'can't set the address, but can access a given memory location... 1 byte at a time
DIM z AS INTEGER
z = PEEK(y)
z = z + (PEEK(y) * 256)
BBC BASIC
The original BBC BASIC doesn't provide an address-of operator, but BBC BASIC for Windows does:
REM get a variable's address:
y% = ^x%
REM can't set a variable's address, but can access a given memory location (4 bytes):
x% = !y%
With BBC BASIC on other platforms the address of a variable can be found by calling a short piece of machine code, see BeebWiki.
Beef
int i = 5;
int* p = &i;
Set the address:
int* p = (int*)((void*)0xDEADBEEF);
C / C++
Get the address
Note that void*
is a "pure" address which doesn't carry the type information anymore. If you need the type information (e.g. to recover the variable itself in a type safe manner), use a pointer to the appropriate type instead; in this case int*
.
int i;
void* address_of_i = &i;
C++ only: C++ allows overloading the &
operator. To bypass this, for example in generic code, use the library function addressof
:
#include <memory>
int i;
auto address_of_i = std::addressof(i);
Set the address
While C++ doesn't directly support putting a variable at a given address, the same effect can be achieved by creating a reference to that address:
int& i = *(int*)0xA100;
If the type of the variable requires initialization, it is necessary to use placement new:
#include <new>
struct S { int i = 0; S() {} };
auto& s = *new (reinterpret_cast<void*>(0xa100)) S;
Overlaying of variables is done with anonymous unions; however at global/namespace scope such variables have to be static (i.e. local to the current file):
static union
{
int i;
int j;
};
C++ only: An alternative (and cleaner) solution is to use references:
int i;
int& j = i;
Note that in this case, the variables can be non-static.
If the type of two overlaid variables is not sufficiently similar, then writes to one may not be reflected in reads from the other, even though they have the same address. This is because the optimizer is free to assume that variables of different types do not alias. To read or write a variable as a different type, use memcpy
:
#include <cstring>
inline float read_as_float(int const& i) { float f; memcpy(&f, &i, sizeof(f)); return f; }
int i = 0x0a112233;
float f = read_as_float(i);
C#
Use of pointers in C# is restricted to unsafe
sections of code, which is enabled in Microsoft's C# compiler with the commandline parameter /unsafe
or in Mono's C# compiler with -unsafe
(or --unsafe
in older versions).
Get the address
Note that void* is a "pure" address which doesn't carry the type information anymore. If you need the type information (e.g. to recover the variable itself in a type safe manner), use a pointer to the appropriate type instead; in this case int*.
unsafe
{
int i = 5;
void* address_of_i = &i;
}
COBOL
Pointers were added in COBOL 2002.
Get Address
data division.
working-storage section.
01 ptr usage pointer.
01 var pic x(64).
procedure division.
set ptr to address of var.
Set Address
Sets the address of a variable using the BASED
clause. There are other methods, in particular LINKAGE SECTION
variables.
OCOBOL*> Rosetta Code set address example
*> tectonics: cobc -x setaddr.cob && ./setaddr
program-id. setaddr.
data division.
working-storage section.
01 prealloc pic x(8) value 'somedata'.
01 var pic x(8) based.
procedure division.
set address of var to address of prealloc
display var end-display
goback.
end program setaddr.
Common Lisp
Simulated Address of Variable
Common Lisp has no means to take a simple address reference to a place (the Lisp term for any one of many types of assignable storage locations). For instance, to access the slot of a structure, we need the structure itself (which is essentially a pointer) and a symbol denoting the slot name. To access an array, we need that array object, and an index. To access a local variable, we need the closure object, which is only accessible to code within the lexical scope, which is a long-winded way of saying, we can only access a variable via an expression which is in the lexical scope of the variable.
Yet, thanks to Lisp macros and lexical closures, we can create reference values which behave like address of places. A tiny module for doing this is found in Lisppaste #71952 (now it's available here), required by the following example:
;;; Demonstration of references by swapping two variables using a function rather than a macro
;;; Needs http://paste.lisp.org/display/71952
(defun swap (ref-left ref-right)
;; without with-refs we would have to write this:
;; (psetf (deref ref-left) (deref ref-right)
;; (deref ref-right) (deref ref-left))
(with-refs ((l ref-left) (r ref-right))
(psetf l r r l)))
(defvar *x* 42)
(defvar *y* 0)
(swap (ref *x*) (ref *y*))
;; *y* -> 42
;; *x* -> 0
These references are completely safe to use. There is no way that a place can disappear, leaving a reference dangling, because if a reference is a live object, it prevents the object which contains the referenced place from becoming garbage. Also note that if two references are taken to the same memory location, they are two distinct objects. A function could be provided to test two references for referential equality (do they point to the same object).
Varible-Like Moniker for External Location
What does it mean to "set the address of a variable?" One interpretation of this task is: rather than let the programming language compiler or run-time allocate a named storage location in its usual ways, force the allocation of a variable at some particular memory location, such as a hardware register, or a variable in a foreign library. Lisp implementations have foreign function interfaces for doing this sort of thing.
Here is an example specific to CLISP running on either Linux or Cygwin. It creates a Lisp errno
variable which is located in the C Library's errno
.
The C Library's errno
is actually thread-specific, whose location is retrieved by calling a hidden function.
We wrap this function with a Lisp foreign call which is properly annotated as returning a C pointer to int. When we call this function, we get an object that behaves like a reference to that location. All we need then is a macro which looks like a storage location.
(use-package :ffi)
(defmacro def-libc-call-out (name &rest args)
`(def-call-out ,name
(:language :stdc)
#-cygwin(:library "libc.so.6")
#+cygwin (:library "cygwin1.dll")
,@args))
(progn
(def-libc-call-out errno-location
#-cygwin (:name "__errno_location")
#+cygwin (:name "__errno")
(:arguments)
(:return-type (c-pointer int)))
(defun get-errno ()
(let ((loc (errno-location)))
(foreign-value loc)))
(defun set-errno (value)
(let ((loc (errno-location)))
(setf (foreign-value loc) value)))
(defsetf get-errno set-errno)
(define-symbol-macro errno (get-errno)))
Test:
[1]> (setf errno 42) 42 [2]> errno 0 ;; Oops! the REPL itself executed a bunch of code which cleared errno [3]> (progn (delete-file "nonexistent") errno) 2 ;; Aha! 2 is ENOENT: No such file or directory
Component Pascal
BlackBox Component Builder
MODULE AddressVar;
IMPORT SYSTEM,StdLog;
VAR
x: INTEGER;
PROCEDURE Do*;
BEGIN
StdLog.String("ADR(x):> ");StdLog.IntForm(SYSTEM.ADR(x),StdLog.hexadecimal,8,'0',TRUE);StdLog.Ln
END Do;
BEGIN
x := 10;
END AddressVar.
Execute: ^Q AddressVar.Do
- Output:
ADR(x):> 653700D8H
Creative Basic
== Get ==
To get the address of a variable without using the Windows API:
DEF X:INT
DEF pPointer:POINTER
pPointer=X
----
To get the address of a variable using the Windows API Lstrcpy function called in Creative Basic:
(This may give users of another language without a native way to get the address of a variable to work around that problem.)
DEF Win:WINDOW
DEF Close:CHAR
DEF ScreenSizeX,ScreenSizeY,Col:INT
'***Map Function***
DECLARE "Kernel32",Lstrcpy(P1:POINTER,P2:POINTER),INT
'The pointers replace the VB3 variable type of Any.
'Note: This is translated from VB3 or earlier code, and "Ptr" is *not* a Creative Basic pointer.
DEF Ptr:INT
DEF X1:INT
DEF X2:STRING
X1=123
'***Call function***
Ptr=Lstrcpy(X1,X1)
GETSCREENSIZE(ScreenSizeX,ScreenSizeY)
WINDOW Win,0,0,ScreenSizeX,ScreenSizeY,@MINBOX|@MAXBOX|@SIZE|@MAXIMIZED,0,"Skel Win",MainHandler
'***Display address***
PRINT Win, "The address of x1 is: " + Hex$(Ptr)
X2="X2"
WAITUNTIL Close=1
CLOSEWINDOW Win
END
SUB MainHandler
SELECT @CLASS
CASE @IDCLOSEWINDOW
Close=1
ENDSELECT
RETURN
Note: The Windows Dev Center (http://msdn.microsoft.com/en-us/library/windows/desktop/ms647490%28v=vs.85%29.aspx) says
improper use of the Lstrcpy function may compromise security. A person is advised to see the Windows Dev site before using
the Lstrcopy function.
== Set ==
It appears to the author the closest one can come to setting the address of a variable is to set which bytes will be
used to store a variable in a reserved block of memory:
DEF pMem as POINTER
pMem = NEW(CHAR,1000) : 'Get 1000 bytes to play with
#<STRING>pMem = "Copy a string into memory"
pMem += 100
#<UINT>pMem = 34234: 'Use bytes 100-103 to store a UINT
DELETE pMem
D
Take the address of a variable:
int i;
int* ip = &i;
Using a numeric value:
int* ip = cast(int*)0xdeadf00d;
Locating a "regular" variable at a specific address is not possible.
The closest thing is passing a dereferenced pointer to a reference parameter.
void test(ref int i) {
import std.stdio;
writeln(&i);
}
void main() {
test(* (cast(int*)0xdeadf00d) );
}
Delphi
Turbo/Borland Pascal and Delphi (Object Pascal) support the @ (address of) operator and the var: [type] absolute declaration.
To get the address of any variable, structure, procedure or function use the @-operator:
var
i: integer;
p: ^integer;
begin
p := @i;
writeLn(p^);
end;
Note, (untyped) constants do not have an address in Pascal.
A variable can be declared as absolute i. e.: to reside at a specific address:
var
crtMode: integer absolute $0040;
str: string[100];
strLen: byte absolute str;
Draco
/* This code uses a CP/M-specific address to demonstrate fixed locations,
* so it will very likely only work under CP/M */
proc nonrec main() void:
/* When declaring a variable, you can let the compiler choose an address */
word var;
/* Or you can set the address manually using @, to a fixed address */
word memtop @ 0x6; /* CP/M stores the top of memory at 0x0006 */
/* or to the address of another variable, by naming that variable */
word var2 @ var; /* var2 will overlap var */
/* This works with both automatically and manually placed variables. */
word memtop2 @ memtop; /* same as "memtop2 @ 0x6" */
/* Once a variable is declared, you can't change its address at runtime. */
var := 1234; /* assign a value to var _and_ var2 */
/* The address of a variable can be retrieved using the & operator.
* However, this returns a pointer type, which is distinct from an
* integer type. To use it as a number, we have to coerce it to an integer
* first. */
writeln("var address=", pretend(&var,word):5, " value=", var:5);
writeln("memtop address=", pretend(&memtop,word):5, " value=", memtop:5);
writeln("var2 address=", pretend(&var2,word):5, " value=", var2:5);
writeln("memtop2 address=", pretend(&memtop2,word):5, " value=", memtop2:5)
corp
- Output:
var address= 276 value= 1234 memtop address= 6 value=58374 var2 address= 276 value= 1234 memtop2 address= 6 value=58374
ERRE
ERRE hasn't explicit pointers, but only a function that gets the address of a variable
........
A%=100
ADDR=VARPTR(A%)
.......
ADDR contains the value of the address of variable A (from 0 to 65535 because every ERRE module has a 64K address space). ERRE data types is 2 bytes-long for integer, 4 (5 with C-64) for reals and 8 for double-real variables. Using this address you can modify the variable's value without using an assignment statement:
PROGRAM POINTER
BEGIN
A%=100
ADDR=VARPTR(A%)
PRINT(A%) ! prints 100
POKE(ADDR,200)
PRINT(A%) ! prints 200
END PROGRAM
Note: With C-64 substitute POKE(ADDR,200) with POKE(ADDR+3,200).
FBSL
Unlike in other BASICs, pointers are readily available in FBSL in several ways although C-style pointer arithmetics is not supported.
1. A simple Variant variable may be dereferenced to point to any other FBSL entity from simple variables through arrays to class instances and COM objects with a ReferenceOf operator, e.g.
ReferenceOf a = b
whereby a is set to refer to the variable b.
2. Non-function entities' pointers can be both retrieved and set using a PointerOf operator which also has a shorthand alias @, e.g.
@a = @b
whereby a is set to refer to the variable b. Assignment through the PointerOf operator also accepts integer literals to set the variable's absolute address to.
3. Function pointers can be both retrieved and set using an AddressOf operator as in the following sample script. Assignment via AddressOf also accepts integer literals to set a function pointer to an absolute address.
#APPTYPE CONSOLE SUB Foo() PRINT "foo" END SUB SUB Bar() PRINT "bar" END SUB ADDRESSOF Foo = ADDRESSOF Bar Foo() // prints "bar" to the console PAUSE
4. Values at an absolute address or address read by a PointerOf operator plus a byte offset can be retrieved or set using the Peek()/Poke() and GetMem()/SetMem() functions.
Forth
Variables and created memory blocks return their address when referenced. The "fetch" operator @ could also be pronounced "dereference".
variable foo foo . \ some large number, an address 8 foo ! foo @ . \ 8
You can define a constant or value with an address, which then acts like a variable. This can be used to refer to fixed addresses (such as I/O ports), graphics buffers, or allocated memory.
$3F8 constant LPT1: 8 LPT1: !
100 cells allocate throw value buffer 42 buffer 20 cells + !
Fortran
program test_loc
implicit none
integer :: i
real :: r
i = loc(r)
print *, i
end program
Note: loc
is a common extension that is implemented
by e.g. the Intel Fortran Compiler, G95 and gfortran.
FreeBASIC
One can get the address of a variable using the @ operator:
' FB 1.05.0 Win64
Dim a As Integer = 3
Dim p As Integer Ptr = @a
Print a, p
To my knowledge, it is not possible to set the address of a variable to a specific address in FB though (as in C/C++) you can do something like this as a workaround:
Var p = Cast(Integer Ptr, 1375832)
*p = 42
Print p, *p
FutureBasic
window 1
short i = 575
ptr j
j = @i
printf @"Address of i = %ld",j
print @"Value of i = ";peek word(j)
HandleEvents
Output:
Adddress of i = 4330713552 Value of i = 575
Go
Go has pointers. Just like in C, you can "take the address" of an addressable value by using the &
operator, and access the value pointed to by a pointer using the *
operator.
Unlike in C, pointers are not readily convertible to integers and
there is no direct pointer arithmetic.
You may print out the address of a pointer, either using the Print function
on the pointer, or using the %p
format specifier
in formatted output (just like in C).
When rarely required, you can convert a pointer to an integer using the unsafe package.
It is not possible in Go to set the address of a variable, however you can assign an arbitrary value to a pointer and use/deference that pointer.
The following demonstrates getting the address of a variable and storing/printing it various ways. It also demonstrates accessing an arbitrary memory location (here the known address of a float) as an integer.
package main
import (
"fmt"
"unsafe"
)
func main() {
myVar := 3.14
myPointer := &myVar
fmt.Println("Address:", myPointer, &myVar)
fmt.Printf("Address: %p %p\n", myPointer, &myVar)
var addr64 int64
var addr32 int32
ptr := unsafe.Pointer(myPointer)
if unsafe.Sizeof(ptr) <= unsafe.Sizeof(addr64) {
addr64 = int64(uintptr(ptr))
fmt.Printf("Pointer stored in int64: %#016x\n", addr64)
}
if unsafe.Sizeof(ptr) <= unsafe.Sizeof(addr32) {
// Only runs on architectures where a pointer is <= 32 bits
addr32 = int32(uintptr(ptr))
fmt.Printf("Pointer stored in int32: %#08x\n", addr32)
}
addr := uintptr(ptr)
fmt.Printf("Pointer stored in uintptr: %#08x\n", addr)
fmt.Println("value as float:", myVar)
i := (*int32)(unsafe.Pointer(&myVar))
fmt.Printf("value as int32: %#08x\n", *i)
}
- Output:
On a 32 bit architecture:
Address: 0x3826c020 0x3826c020 Address: 0x3826c020 0x3826c020 Pointer stored in int64: 0x000000003826c020 Pointer stored in int32: 0x3826c020 Pointer stored in uintptr: 0x3826c020 value as float: 3.14 value as int32: 0x51eb851f
On a 64 bit architecture:
Address: 0xc208000170 0xc208000170 Address: 0xc208000170 0xc208000170 Pointer stored in int64: 0x000000c208000170 Pointer stored in uintptr: 0xc208000170 value as float: 3.14 value as int32: 0x51eb851f
IWBASIC
== Get ==
There are at least three ways to get the address of a variable in IWBASIC. The first is to use the address of operator:
DEF X:INT
PRINT &X
'This will print in the console window (after OPENCONSOLE is issued.)
'To Print in an open window the appropriate Window variable is specified, e.g., PRINT Win,&X.
The second is to use a pointer:
DEF X:INT
DEF pPointer:POINTER
pPointer=X
The third is to use the Windows API function Lstrcpy. That is done in the same way as the Creative Basic example;
however, the function would be declared as follows: DECLARE IMPORT,Lstrcpy(P1:POINTER,P2:POINTER),INT.
== Set ==
It appears to the author that the closest one can come to being able to assign an address to a variable is to set
which bytes will be used to store a variable in a block of reserved memory:
DEF pMem as POINTER
pMem = NEW(CHAR,1000) : 'Get 1000 bytes to play with
#<STRING>pMem = "Copy a string into memory"
pMem += 100
#<UINT>pMem = 34234: 'Use bytes 100-103 to store a UINT
DELETE pMem
J
J hides the details of pointers and memory allocation from the programmer, so it is rarely, if ever, necessary to do this. However, for those times when there is no better substitute, J provides access to these low-level details:
var =: 52 NB. Any variable (including data, functions, operators etc)
var_addr =: 15!:6<'var' NB. Get address
new_var =: 15!:7 var_addr NB. Set address
Java
There is no way to access addresses of variables in Java. However, the default hashCode() method defined in the Object class, "is typically implemented by converting the internal address of the object into an integer". Therefore, in some Java implementations at least, the hash code returned by Object.hashCode()
reflects at least part of the address of an object. For objects whose classes have overridden the hashCode()
method, you can still access the original hash code through the System.identityHashCode() function.
Julia
Julia provides a variety of ways to work with and manipulate raw address pointers (via the built-in Ptr
type), which are mostly used in practice for calling C library functions.
Julia has both mutable and immutable objects. Immutable objects are values, such as constants, bit-based values such as numeric 3, or immutable structs. Immutable objects may not have a single set location in memory, but instead might in some cases be created on demand by the compiled code. Mutable objects such as typical arrays and mutable structs, on the other hand, have addresses on the Julia heap that can be found with specific base Julia functions which use the Ptr
type.
To get the memory address of a Julia object, one can use pointer_from_objref(object)
, and the reverse is accomplished by unsafe_pointer_to_objref(ptr)
:
julia> x = [1, 2, 3]
julia> ptr = pointer_from_objref(x)
Ptr{Void} @0x000000010282e4a0
julia> unsafe_pointer_to_objref(ptr)
3-element Array{Int64,1}:
1
2
3
The latter is "unsafe" because it only works if ptr
refers to a valid heap-allocated "boxed" Julia object, which can only be safely allocated by Julia itself.
Another common use of pointers is for arrays of values, which are typically passed in low-level C-like libraries via pointers to contiguous sets of values in memory. This is accomplished in Julia by the pointer(A)
function, which returns a pointer to the data stored in a high-level Julia array A
. Given a pointer p
to values of a given type, the i
-th value (numbered starting at 1 for the value pointed to by p
) can be read or written by the low-level unsafe_load(p, i)
and unsafe_store!(p, val, i)
functions, or it can be converted back to a high-level Julia array type by the pointer_to_array(p, dimensions)
function:
julia> A = [1, 2.3, 4]
3-element Array{Float64,1}:
1.0
2.3
4.0
julia> p = pointer(A)
Ptr{Float64} @0x0000000113f70d60
julia> unsafe_load(p, 3)
4.0
julia> unsafe_store!(p, 3.14159, 3)
julia> A
3-element Array{Float64,1}:
1.0
2.3
3.14149
julia> pointer_to_array(p, (3,))
3-element Array{Float64,1}:
1.0
2.3
3.14149
Finally, an arbitrary integer can be converted to a pointer type with convert
, which allows an arbitrary address to be converted into and viewed as an array of an arbitrary type and read or written (although this can easily result in a crash if an invalid address is used). In the following example, we create a "new" length-two array B
at an address offset by 8 bytes from the address of the data in A
above, which will make it point to the second element of A
:
julia>
julia> q = convert(Ptr{Float64}, 0x0000000113f70d68)
Ptr{Float64} @0x0000000113f70d68
julia> B = pointer_to_array(q, (2,))
2-element Array{Float64,1}:
2.3
3.14149
Kotlin
Kotlin/JVM does not support pointers and so (apart from some jiggery-pokery with the sun.misc.Unsafe class) there is no way to obtain a variable's address.
However, Kotlin/Native which is currently (January 2018) available as a pre-release version does support pointers to enable it to interoperate with C code. The following program shows how to obtain the address of a variable which has been allocated on the native heap. It does not appear to be possible to allocate a variable at a particular address.
// Kotlin Native v0.5
import kotlinx.cinterop.*
fun main(args: Array<String>) {
val intVar = nativeHeap.alloc<IntVar>()
intVar.value = 42
with(intVar) { println("Value is $value, address is $rawPtr") }
nativeHeap.free(intVar)
}
- Output:
Sample output:
Value is 42, address is 0xc149f0
Lambdatalk
In Lambdatalk expressions are made of words and S-expressions. Words have no address, they stay unevaluated. S-expressions built with the [lambda, quote|', pair, array] keywords, are replaced by words [_LAMB_xx, _QUOT_xx, _PAIR_xx, _ARRA_xx] - where xx is any positive system computed integer - which are references to functions stored in four dictionaries, [LAMB, QUOT, PAIR, ARRA]. Users are not supposed to access these addresses. During the post-processing phase the addresses which have not been "consumed" by the evaluation are automatically evaluated to show the related values in a convenient way. For instance:
1) lambdas
{lambda {:x} {* :x :x}}
-> _LAMB_123
2) arrays
'{A.new hello world} // defining an array
-> _ARRA_123 // as replaced and used before post-processing
-> [hello,world] // if unused after post-processing
3) pairs
{pre
'{P.new hello world} // defining a pair
-> _PAIR_123 // as replaced and used before post-processing
-> (hello world) // if unused after post-processing
4) quotes
'{+ 1 2} // protecting an expression
-> _QUOT_124 // as replaced and protected before post-processing
-> {+ 1 2} // as displayed after post-processing
Lua
Pure/native Lua does not support true pointer operations. Memory management is automatic, and garbage-collected, so at best you can hold a temporary reference to the allocated memory. However the "virtual address" of complex types is discoverable (and is in fact how the internals deal with assignment, equality testing, etc), and userdata types typically reveal an actual physical address.
t = {}
print(t)
f = function() end
print(f)
c = coroutine.create(function() end)
print(c)
u = io.open("/dev/null","w")
print(u)
print(_G, _ENV) -- global/local environments (are same here)
print(string.format("%p %p %p", print, string, string.format)) -- themselves formatted as pointers
- Output:
table: 00000000001d93b0 function: 00000000001dcb30 thread: 00000000001de088 file (00007ffe2612fa90) table: 00000000001d1e80 table: 00000000001d1e80 0000000065b9cd60 00000000001d90b0 0000000065ba34f0
Maple
To obtain the address of any expression in Maple, use the builtin function addressof
.
> addressof( x );
18446884674469911422
The inverse operation is pointto
:
> pointto( 18446884674469911422 );
x
This works for any expression, not just variables:
> addressof( sin( x )^2 + cos( x )^2 );
18446884674469972158
> pointto( 18446884674469972158 );
2 2
sin(x) + cos(x)
Modula-2
Get Address
MODULE GetAddress;
FROM SYSTEM IMPORT ADR;
FROM InOut IMPORT WriteInt, WriteLn;
VAR var : INTEGER;
adr : LONGINT;
BEGIN
adr := ADR(var); (*get the address*)
WriteInt(adr, 0);
WriteLn;
END GetAddress.
Set Address
MODULE SetAddress;
CONST adress = 134664460;
VAR var [adress] : INTEGER;
BEGIN
(*do nothing*)
END SetAddress.
Nanoquery
Get Address
import native
a = 5
println format("0x%08x", native.address(a))
- Output:
0xc46be580
Set Address
We cannot directly modify the address of a variable that has already be created, but we can create a pointer and move it to point at a different address.
import native
a = 123
b = 456
ptr = native.address(a)
println native.object(ptr)
ptr = native.address(b)
println native.object(ptr)
- Output:
123 456
NewLISP
Get Address
(set 'a '(1 2 3))
(address a)
Nim
var x = 12
var xptr = addr(x) # Get address of variable
echo cast[int](xptr) # and print it
xptr = cast[ptr int](0xFFFE) # Set the address
Oberon-2
Get Address
VAR a: LONGINT; VAR b: INTEGER; b := 10; a := SYSTEM.ADR(b); (* Sets variable a to the address of variable b *)
Set Address
SYSTEM.PUT(a, b); (* Sets the address of b to the address of a *)
OCaml
OCaml is a high-level programming language, and thus does not expose the addresses of variables to the programmer.
However, it is kind of possible to get the address of the structure pointed to by a reference type. At runtime, every value in OCaml is a pointer to a "block" structure (i.e. boxed) except for int
(and things that can fit inside an int
, like char
, bool
, None
, datatypes with all no-arg constructors, etc.) which is a direct value (unboxed). For boxed types, it is possible to get this address by some tricky hacks.
An OCaml value is distinguished between an unboxed integer and a boxed type by the last (least significant) bit. If the bit is set (1), then the value is an integer, and the rest of the bits are the bits of the integer, shifted one bit to the left (that's why int
in OCaml can only represent 31 bits in 32-bit, and 63 bits in 64-bit). If the last bit is cleared (0), then the value is a pointer, and all the bits (including the last one) form the address.
To get the address, we re-interpret the boxed value as an integer; however, this will get the address divided by 2, since the integer only uses the upper 31 (or 63) bits. Therefore, we need to shift this number left by one to get the real address. However, int
cannot hold all the bits of the address, so if we shift we will lose a bit, so we use the nativeint
type to represent it instead:
let address_of (x:'a) : nativeint =
if Obj.is_block (Obj.repr x) then
Nativeint.shift_left (Nativeint.of_int (Obj.magic x)) 1 (* magic *)
else
invalid_arg "Can only find address of boxed values.";;
let () =
let a = 3.14 in
Printf.printf "%nx\n" (address_of a);;
let b = ref 42 in
Printf.printf "%nx\n" (address_of b);;
let c = 17 in
Printf.printf "%nx\n" (address_of c);; (* error, because int is unboxed *)
Odin
package main
main :: proc() {
i : int = 42
ip : ^int = &i // Get address of variable
address := uintptr(0xdeadf00d)
ip2 := cast(^int)address // Set the address
}
Oforth
In Oforth, addresses are not exposed.
Variables (like all Oforth metamodel) are objects. It is possible to retrieve the object corresponding to a variable and use #at and #put to change its value.
For instance, here, after creating and setting a variable A, we store the corresponding word into a variable B :
tvar: A
10 to A
tvar: B
#A to B
B .s
[1] (Variable) #A
>ok
12 B put
A .s
[1] (Integer) 12
[2] (Variable) #A
>ok
Ol
Otus Lisp has no means to take a simple address reference to a place (the Lisp term for any one of many types of assignable storage locations). It can be done only using the extension mechanism (ffi), but in any case this information can't be useful due to Garbage Collection (at any time the variable can be moved to other place that automatically makes invalid the got reference pointer).
ooRexx
ooRexx is a high-level programming language, and thus does not expose the addresses of variables to the programmer. Variables can be accessed by name using the VAR(), SYMBOL(), and VALUE() built-in functions.
OxygenBasic
'GETTING ADDRESS OF VARIABLE int a=1,b=2,c=3 print "Adrress of b: " @b 'SETTING ADDRESS OF INDIRECT (BYREF) VARIABLE int *aa,*bb,*cc @bb=@b 'setting address of bb to address of b print "Value of bb: " bb 'result: 2
Panoramic
== Get ==
adr(variable)
Example:
dim a
print adr(a)
== Set ==
Whether Panoramic is able to set the value of a variable may depend on what is meant by that. Panoramic implements the
poke command to set a byte from a value of 0 to 255 (inclusive). Panoramic also implements the peek command to get
the value of a byte, so it is possible to the following:
(A)
dim a
rem a variable with no post-fix is a real.
poke adr(a),57
rem the value of a variable being set by setting an address, the address of a in this instance.
(B)
dim a%,b%
rem % means integer.
b%=57
poke adr(a%),b%
rem b% being assigned to the address of a%, in this instance.
rem it is even possible to free b%
free b%
print a%
(C)
dim a,b
b=57
poke adr(a),b
b=peek(adr(a))
print b
rem the address of b being, in effect, set to the address of a, the address of a, in this instance.
rem Observations and further insight welcome.
''Note:'' An attempt to poke a real or an integer (Panoramic's only numeric types) value of less than 0 or of more than
255 will cause an error.
PARI/GP
In GP you can sent the address to built-in commands like issquare
issquare(n, &m)
but you cannot directly compute with it. You can view the address of a variable and other debugging information with the
\x
command.
In PARI you can use standard C commands.
Pascal
See Delphi
Perl
To get the address, get the reference to a variable, and either stringify it, or use Scalar::Util's refaddr() to get just the address. Also see Devel::Peek.
use Scalar::Util qw(refaddr);
print refaddr(\my $v), "\n"; # 140502490125712
Alternatively, the address (in hexadecimal) can be directly obtained with printf
:
printf "%p", $v; # 7fc949039590
Use Devel::Pointer::PP if you want to dereference a certain address in memory.
Changing the address of a variable is not easily possible, but see perlapi. Wanting to go against the automatic memory management is a sign that this is only used to hack around the deficiencies of dafter languages. I can imagine address munging is commonly used to make variable aliasing possible, but Perl already has a higher level syntax for that.
Simple reference (address) manipulation.
my $a = 12;
my $b = \$a; # get reference
$$b = $$b + 30; # access referenced value
print $a; # prints 42
Example how to make variable overlay.
my $a = 12;
our $b; # you can overlay only global variables (this line is only for strictness)
*b = \$a;
print $b; # prints 12
$b++;
print $a; # prints 13
Phix
Phix does not natively support pointers, but there are methods to do whatever you need.
You cannot set the address of a variable, but you can save it and use that to modify things.
Things get more complicated for floats/strings/sequences, particularly wrt reference counts,
but there are examples aplently, for pretty much everything, in the builtins/VM sources.
Since all hll variables are dword-aligned or better, a shr 2 loses no information and the
result can be safely stored in an integer, avoiding some nasty int/float conversions for
anything above #3FFFFFFF (on 32 bit, add another 8Fs on 64 bit).
Obviously extreme caution must be exercised, in the example below if you save the address
of V which is local to the address() procedure, and then exit said, you have a pointer to
memory that will be re-used for something completely different almost immediately.
Example is 32 and 64 bit compatible, which at this level needs twice the code, however the
compiler only omits the appropriate binary for the currently selected target architecture.
You can also use allocate/free with peek/poke to obtain similar effects.
procedure address() object V integer addr4 -- stored /4 (assuming dword aligned, which it will be) #ilASM{ [32] lea eax,[V] shr eax,2 mov [addr4],eax [64] lea rax,[V] shr rax,2 mov [addr4],rax [] } if machine_bits()=32 then poke4(addr4*4,123) elsif machine_bits()=64 then poke8(addr4*4,123) end if ?V if getc(0) then end if end procedure address()
- Output:
123
PicoLisp
The PicoLisp function 'adr' returns the address of a variable. A variable may be either a symbol or a cons pair in PicoLisp.
The returned address is a number representing an encoded pointer. For symbols, it is a negative number, and for cons pairs a positive number. The same function 'adr' can then be used to convert that pointer back to the original object.
: (setq X 7)
-> 7
: (adr 'X)
-> -2985527269106
: (val (adr -2985527269106))
-> 7
: (set (adr -2985527269106) '(a b c))
-> (a b c)
: X
-> (a b c)
PL/I
declare addr builtin; /* retrieve address of a variable */
declare ptradd builtin; /* pointer addition */
declare cstg builtin; /* retrieve length of the storage of a variable */
declare hbound builtin; /* retrieve the number of elements in an array */
declare p pointer;
declare i bin fixed(31) init(42);
p = addr(i); /* Obtain address of variable, stored in integer variable k */
/* how to read a string bit by bit - example for pointerAdd */
/* we built a pointer (movingPointer), which will move through the */
/* storage of a variable (exampleTxt). attached to the pointer is */
/* an array of bits (movingBit) - this means wherever the pointer */
/* is pointing to, this will also be the position of the array. */
/* only whole bytes can be addressed. to get down to the single bits, */
/* an array of 8 bits is used. */
declare exampleTxt char(16) init('Hello MainFrame!);
declare movingPointer pointer;
declare movingBit(8) bit(01) based(movingPointer);
declare walkOffset bin fixed(31);
declare walkBit bin fixed(31);
do walkOffset = 0 to cstg(exampleTxt)-1;
movingPointer = ptradd(addr(exampleTxt, walkOffset);
do walkBit = 1 to hbound(movingBit);
put skip list( 'bit at Byte ' !!walkOffset
!!' and position '!!walkBit
!!' is ' !!movingBit(walkBit));
end;
end;
PL/M
100H:
/* THERE IS NO STANDARD LIBRARY
THIS DEFINES SOME BASIC I/O USING CP/M */
BDOS: PROCEDURE (F,A); DECLARE F BYTE, A ADDRESS; GO TO 5; END BDOS;
EXIT: PROCEDURE; CALL BDOS(0,0); END EXIT;
PUT$CHAR: PROCEDURE (C); DECLARE C BYTE; CALL BDOS(2,C); END PUT$CHAR;
PRINT: PROCEDURE (S); DECLARE S ADDRESS; CALL BDOS(9,S); END PRINT;
NEWLINE: PROCEDURE; CALL PRINT(.(13,10,'$')); END NEWLINE;
/* PRINT 16-BIT HEX VALUE (POINTER) */
PRINT$HEX: PROCEDURE (N);
DECLARE N ADDRESS, (I, C) BYTE;
DO I=0 TO 3;
IF I <> 3 THEN C = SHR(N,12-4*I) AND 0FH;
ELSE C = N AND 0FH;
IF C >= 10 THEN C = C - 10 + 'A';
ELSE C = C + '0';
CALL PUT$CHAR(C);
END;
END PRINT$HEX;
/* OF COURSE WE WILL NEED SOME VALUES TO POINT AT TOO */
DECLARE FOO ADDRESS INITIAL (0F00H);
DECLARE BAR ADDRESS INITIAL (0BA1H);
/* OK, NOW ON TO THE DEMONSTRATION */
/* THE ADDRESS OF A VARIABLE CAN BE RETRIEVED BY PREPENDING IT WITH A
DOT, E.G.: */
CALL PRINT(.'FOO IS $'); CALL PRINT$HEX(FOO);
CALL PRINT(.' AND ITS ADDRESS IS $'); CALL PRINT$HEX(.FOO);
CALL NEWLINE;
CALL PRINT(.'BAR IS $'); CALL PRINT$HEX(BAR);
CALL PRINT(.' AND ITS ADDRESS IS $'); CALL PRINT$HEX(.BAR);
CALL NEWLINE;
/* PL/M DOES NOT HAVE C-STYLE POINTERS. INSTEAD IT HAS 'BASED' VARIABLES.
WHEN A VARIABLE IS DECLARED 'BASED', ITS ADDRESS IS STORED IN ANOTHER
VARIABLE.
NOTE HOWEVER THAT THE 'ADDRESS' DATATYPE IS SIMPLY A 16-BIT INTEGER,
AND DOES NOT INTRINSICALLY POINT TO ANYTHING.
THE FOLLOWING DECLARES A VARIABLE 'POINTER', WHICH WILL HOLD AN ADDRESS,
AND A VARIABLE 'VALUE' WHICH WILL BE LOCATED AT WHATEVER THE VALUE IN
'POINTER' IS. */
DECLARE POINTER ADDRESS;
DECLARE VALUE BASED POINTER ADDRESS;
/* WE CAN NOW ACCESS 'FOO' AND 'BAR' THROUGH 'VALUE' BY ASSIGNING THEIR
ADDRESSES TO 'POINTER'. */
POINTER = .FOO;
CALL PRINT(.'POINTER IS $'); CALL PRINT$HEX(POINTER);
CALL PRINT(.' AND VALUE IS $'); CALL PRINT$HEX(VALUE); CALL NEWLINE;
POINTER = .BAR;
CALL PRINT(.'POINTER IS $'); CALL PRINT$HEX(POINTER);
CALL PRINT(.' AND VALUE IS $'); CALL PRINT$HEX(VALUE); CALL NEWLINE;
/* MUTATION IS ALSO POSSIBLE OF COURSE */
VALUE = 0BA3H;
CALL PRINT(.'VALUE IS NOW $'); CALL PRINT$HEX(VALUE);
CALL PRINT(.' AND BAR IS NOW $'); CALL PRINT$HEX(BAR); CALL NEWLINE;
/* LASTLY, PL/M SUPPORTS ANONYMOUS CONSTANTS.
YOU CAN TAKE THE ADDRESS OF AN IMMEDIATE CONSTANT, AND PL/M
WILL STORE THE CONSTANT IN THE CONSTANT POOL AND GIVE YOU ITS
ADDRESS. THE CONSTANT MUST HOWEVER BE A BYTE OR A LIST OF BYTES. */
POINTER = .(0FEH,0CAH); /* NOTE THE DOT, AND THE LOW-ENDIAN 16-BIT VALUE */
CALL PRINT(.'POINTER IS $'); CALL PRINT$HEX(POINTER);
CALL PRINT(.' AND VALUE IS $'); CALL PRINT$HEX(VALUE); CALL NEWLINE;
/* NOTE THAT THIS IS ALSO HOW STRINGS WORK - SEE ALL THE DOTS IN FRONT
OF THE STRINGS IN THE 'PRINT' CALLS */
CALL EXIT;
EOF
- Output:
FOO IS 0F00 AND ITS ADDRESS IS 03FA BAR IS 0BA1 AND ITS ADDRESS IS 03FC POINTER IS 03FA AND VALUE IS 0F00 POINTER IS 03FC AND VALUE IS 0BA1 VALUE IS NOW 0BA3 AND BAR IS NOW 0BA3 POINTER IS 034D AND VALUE IS CAFE
PowerBASIC
'get a variable's address:
DIM x AS INTEGER, y AS LONG
y = VARPTR(x)
'can't set the address of a single variable, but can access memory locations
DIM z AS INTEGER
z = PEEK(INTEGER, y)
'or can do it one byte at a time
DIM zz(1) AS BYTE
zz(0) = PEEK(BYTE, y)
zz(1) = PEEK(BYTE, y + 1)
'(MAK creates an INTEGER, LONG, or QUAD out of the next smaller type)
z = MAK(INTEGER, zz(0), zz(1))
'*can* set the address of an array
DIM zzz(1) AS BYTE AT y
'zzz(0) = low byte of x, zzz(1) = high byte of x
PureBasic
Get the address of a variable using the '@' operator.
a.i = 5
MessageRequester("Address",Str(@a))
Set the address of a structured pointer. The pointer can be dereferenced to interact with it's data. Ensure that there is access to the memory address that is assigned to the pointer (i.e. part of allocated memory).
a.i = 5
*b.Integer = @a ;set *b equal to the address of variable a
*c.Integer = $A100 ;set *c to point at memory location $A100 (in hex)
MessageRequester("Address",Str(*b)) ;display the address being pointed at by *b
MessageRequester("Value",Str(*b\i)) ;de-reference the pointer *b to display the data being pointed at
Python
Python traditionally doesn't support low-level operations on memory addresses, except in the limited sense that one can use the mmap module where it's available, and manipulate offsets into memory map objects...including serializing other objects into and out of the memory mapping. New versions of Python support a ctypes module which permits some low level address operations on C-type objects (see C-types Reference for details).
The Python id() function returns a unique ID for any object. This just happens to be implemented as the base address of the object in C Python[2]; but that is not guaranteed by the semantics of the language and should not be considered a standard, nor used as such. But for comparison purposes the ID can be used as an address, since different extant objects will have different IDs.
foo = object() # Create (instantiate) an empty object
address = id(foo)
In addition some folks have written binary Python modules which implement "peek" and "poke" operations, but these are non-standard.
QB64
' Adapted from QB64wiki example a demo of _MEM type data and _MEM functions
Type points
x As Integer
y As Integer
z As Integer
End Type
Dim Shared m(3) As _MEM
Dim Shared Saved As points, first As points
m(1) = _Mem(first.x)
m(2) = _Mem(first.y)
m(3) = _Mem(first.z)
print "QB64 way to manage address of variable..."
first.x = 3: first.y = 5: first.z = 8
Print first.x, first.y, first.z
Save first
first.x = 30: first.y = 50: first.z = 80
Print first.x, first.y, first.z
RestoreIt
Print first.x, first.y, first.z
_MemFree m(1)
_MemFree m(2)
_MemFree m(3)
End
Sub Save (F As points)
Saved.x = F.x
Saved.y = F.y
Saved.z = F.z
End Sub
Sub RestoreIt
_MemPut m(1), m(1).OFFSET, Saved.x
_MemPut m(2), m(2).OFFSET, Saved.y
_MemPut m(3), m(3).OFFSET, Saved.z
End Sub
' Full demonstration of being together Qbasic and QB64 methods for accessing and modifying memory directly
Dim A As Integer, B As String, C(1 To 4) As Double
Print " OLD FASHION MODE OF QBASIC / QUICKBASIC"
Sleep 2: Cls
'Print
Print " GETTING ADDRESS OF VARIABLE"
Print "address of variable QuickBasic compatible in 16 bit OS is emulated in QB64"
Print "Qbasic and QuickBasic used as address a Segment and an Offset"
Print "and by cause many QBasic statements change addresses of variables "
Print "for reorganization of RAM it is higly reccomanded to use"
Print "immediately the address of variable got by Varptr and Varseg"
Print "address of A "; VarSeg(A); "-"; VarPtr(A)
Print "address of the first byte of string B "; VarSeg(B); "-"; VarPtr(B)
Print "address of the 2nd element of array C"; VarSeg(C(2)); "-"; VarPtr(C(2))
Print "address of string B from actual data Segment"; SAdd(B)
Print
Print "Direct access to ram video example "
Print " setting Text video ram as Segment": Def Seg = &HB800
Print "reading at offset 240 of text video ram "; Peek(240)
Print "changing at offset 240 of text video ram with"; Asc("@"); " from e to @"
Poke 240, Asc("@")
Print "changing foreground and background color of a character in text video ram "
Poke 241, Peek(241) Xor &B110111
Poke 265, Peek(265) Xor &B010101
Poke 267, Peek(267) Xor &B001010
Def Seg
Print
Print " CREATING VARIABLE AT A SPECIFIC ADDRESS"
Print " created variable D as single at "; VarSeg(d); "-"; VarPtr(d)
Print "Using the variable in normal way"
Print d
d = 100
Print d
Print " press any key to continue..."; Input$(1)
Cls
Print "Only QB64 methods... _MEM functions"
Dim M As _MEM
A = 2: Print "A is "; A
M = _Mem(A) ' it accesses to variable A
_MemPut M, M.OFFSET, 10 As INTEGER ' it modifies value of A
Print " and now A is "; A
Print "d is "; d
d = _MemGet(M, M.OFFSET, Integer) ' it gets value of A into d
Print "and now d is "; d
_MemFree M
End
R
With the library pryr
x <- 5
y <- x
pryr::address(x)
pryr::address(y)
y <- y + 1
pryr::address(x)
pryr::address(y)
Without any libraries
address <- function(obj) {
paste0("0x", substring(sub(" .*$","",capture.output(.Internal(inspect(obj)))),2))
}
x <- 5
y <- x
address(x)
address(y)
y <- y + 1
address(x)
address(y)
- Output:
[1] "0xbc60668" [1] "0xbc60668" [1] "0xbc60668" [1] "0xbcc1680"
Racket
#lang racket
(require ffi/unsafe)
(define (madness v) ; i'm so sorry
(cast v _racket _gcpointer))
To test that it is doing "sane" things, you can retrieve the value of the C short located at the pointer produced. Racket objects start with a 2-byte tag indicating their type. These calls should all produce fairly small numbers: the Racket source I'm looking at uses only the first 259 tag values. Small fixnums are stored directly in tagged pointers, so attempting this dereferencing on the pointer madness gives you from a fixnum will most likely segfault your process.
(ptr-ref (madness +) _short)
(ptr-ref (madness (/ 4 3)) _short)
(ptr-ref (madness 3.2) _short)
(ptr-ref (madness (sqrt -2)) _short)
(ptr-ref (madness #\a) _short)
(ptr-ref (madness 'foo) _short)
Raku
(formerly Perl 6)
my $x;
say $x.WHERE;
my $y := $x; # alias
say $y.WHERE; # same address as $x
say "Same variable" if $y =:= $x;
$x = 42;
say $y; # 42
- Output:
7857931379550584425
How you set the address of a variable (or any other object) is outside the purview of Raku, but the language supports pluggable object representations, and any given representation scheme could conceivably allow an existing address to be treated as an object candidate where that makes sense. Memory-mapped structs are not unreasonable and are likely to be supported on VMs that allow it.
RapidQ
Dim TheAddress as long
Dim SecVar as byte
Dim MyVar as byte
MyVar = 10
'Get the address of MyVar
TheAddress = varptr(MyVar)
'Set a new value on the address
MEMSET(TheAddress, 102, SizeOf(byte))
'Myvar is now = 102
showmessage "MyVar = " + str$(MyVar)
'...or copy from one address to another using:
MEMCPY(VarPtr(SecVar), TheAddress, SizeOf(byte))
'SecVar is now also = 102
showmessage "SecVar = " + str$(SecVar)
Retro
Retro is only able to directly access memory as 32-bit values within a linear address space.
Get The Address
'a var
&a
Set The Address
Create variable b and point it to address 100
'b var
#100 @Dictionary d:xt store
Byte Addressing
Retro includes a standard library allowing for creation and access of byte-level data. This is done using words which mask, unpack, and repack the bytes within the 32-bit cells.
To read the value at byte address 100:
'example/ByteAddressing.forth include
#100 b:fetch
Or to alter the value at byte address 100:
$e #100 b:store
REXX
REXX has no easy way of getting the address of variables within the langage itself, but since each
REXX variable can be accessed by name and its name passed to (say) subroutines [PROCEDUREs],
with the use of the VALUE and SYMBOL built-in functions (BIFs), it's possible to determine
the state of any variable (defined or not defined, its value, length of the variable's value).
It is possible to use the BIF (shown below) (at least, in the original REXX)
zzz = storage(xxx)
(but only in some REXX interpreters) to access the internal REXX pool of variables, but it
would depend on the (internal) REXX internal structure(s) and almost likely be not portable nor
useable across releases of REXX or the operating system. It would be necessary to follow a
pretty complex chain of pointers to just find the REXX pool of variables and the internal structure
may be pretty complicated and somewhat obscure. Going down this path is not for the faint of
heart.
Ruby
You can't access the address of a "variable" in Ruby. However, it may be possible to get the address of an object.
The Ruby object_id
method returns an object ID that is unique among active objects. It turns out that for the official Ruby implementation, the object ID is based on the address. For non-immediate objects (i.e. anything other than a Fixnum
, Symbol
, true
, false
, or nil
), the address can be obtained by shifting the object ID one to the left. For more information, see the source code for the object_id
method:[3].
For classes that do not override the to_s
method, the to_s
method also shows the address.
>foo = Object.new # => #<Object:0x10ae32000>
>id = foo.object_id # => 2238812160
>"%x" % (id << 1) # => "10ae32000"
Rust
It is not possible to change the memory address of an existing variable in Rust directly. However, you could make a copy of the value and then write it to a specific address.
let v1 = vec![vec![1,2,3]; 10];
println!("Original address: {:p}", &v1);
let mut v2;
// Override rust protections on reading from uninitialized memory
unsafe {v2 = mem::uninitialized();}
let addr = &mut v2 as *mut _;
// ptr::write() though it takes v1 by value, v1s destructor is not run when it goes out of
// scope, which is good since then we'd have a vector of free'd vectors
unsafe {ptr::write(addr, v1)}
println!("New address: {:p}", &v2);
Get the memory address of a variable:
let var = 1;
println!("address of var: {:p}", &var);
Get the value at a certain memory address:
let address: usize = 0x7ffc8f303130;
unsafe {
let val = *(address as *const usize);
println!("value at {}: {:?}", address, val);
}
Set the value at a certain memory address:
unsafe {
*(0x7ffc8f303130 as *mut usize) = 1;
// Note that this invokes undefined behavior if 0x7ffc8f303130 is uninitialized. In that case, std::ptr::write should be used.
std::ptr::write(0x7ffc8f303130 as *mut usize, 1);
}
Scala
There is no way to access addresses in Scala. It's governed by the Memory Management of the JVM controlling or knowing the addresses makes absolutely no sense in Scala.
Sidef
var n = 42;
say Sys.refaddr(\n); # prints the address of the variable
say Sys.refaddr(n); # prints the address of the object at which the variable points to
- Output:
42823224 37867184
Smalltalk
This task does not really make sense in Smalltalk: for one, all we could ask for is the address of an object, not a variable, which is a binding of a name to a value in a lexical scoping (similar to Scheme, Common Lisp and other managed languages). Second, the underlying memory management (garbage collector) is usually free to move objects around, and most implementations do so when objects are tenured or memory areas are defragmented (also similar). So its usefulness is limited to VM developers and debuggers ;-)
You asked for it, and here it is:
|p|
p := Point x:10 y:20.
ObjectMemory addressOf:p.
ObjectMemory collectGarbage.
ObjectMemory addressOf:p "may return another value"
to deal with non-Smalltalk objects, all Smalltalks provide libraries to pass-in and out parameters to foreign function calls (FFI). The underlying memory block will not be moved by the garbage collector and the address can be passed to external (eg. C, C++, asm) functions. For those, we can allocate a block of memory and fiddle around with its "address":
|ptr|
ptr := ExternalBytes new:10.
ptr address.
ptr byteAt:1 put: 16rFF.
However, there are "reference holders", similar to box-objects in scheme/lisp. In Smalltalk these are called "ValueHolder" and are heavily used in UI frameworks. Usually, they are used with the observer pattern as shown in the following example:
|holder|
holder := ValueHolder with:123.
holder onChangeSend:#someChange to:someone.
holder value: 234
Stata
See pointers in Stata help. It's not possible to set the address of a variable, but on can get the address of a variable or a function with the & operator.
a = 1
&a
function f(x) {
return(x+1)
}
&f()
Swift
class MyClass { }
func printAddress<T>(of pointer: UnsafePointer<T>) {
print(pointer)
}
func test() {
var x = 42
var y = 3.14
var z = "foo"
var obj = MyClass()
// Use a pointer to a variable on the stack and print its address.
withUnsafePointer(to: &x) { print($0) }
withUnsafePointer(to: &y) { print($0) }
withUnsafePointer(to: &z) { print($0) }
withUnsafePointer(to: &obj) { print($0) }
// Alternately:
printAddress(of: &x)
printAddress(of: &y)
printAddress(of: &z)
printAddress(of: &obj)
// Printing the address of an object that an object reference points to.
print(Unmanaged.passUnretained(obj).toOpaque())
}
test()
- Output:
0x00007fffe61bcac0 0x00007fffe61bcab8 0x00007fffe61bcaa0 0x00007fffe61bca98 0x00007fffe61bcac0 0x00007fffe61bcab8 0x00007fffe61bcaa0 0x00007fffe61bca98 0x000000000082e2f0
Tcl
It is highly unusual to want to directly manipulate the address of a variable in Tcl, as it is a thoroughly unsafe operation. Indeed, Tcl does not expose any mechanism to do so at the script level. However, Tcl does contain a C-level API function, Tcl_LinkVar, to arrange for a variable's value to always reflect the contents of a particular address in memory. (See Machine Address for an example of how to do that.)
However, that's not the only way of doing it. You can also use the critcl library to put C code directly inside a Tcl script and so work with addresses directly that way.
package require critcl
# This code assumes an ILP32 architecture, like classic x86 or VAX.
critcl::cproc peek {int addr} int {
union {
int i;
int *a;
} u;
u.i = addr;
return *u.a;
}
critcl::cproc poke {int addr int value} void {
union {
int i;
int *a;
} u;
u.i = addr;
*u.a = value;
}
package provide poker 1.0
Demonstrating:
package require poker
# Increment a memory location; this will probably crash if you try for real.
# We don't define how to get a good address, but it's not usually a problem
# for embedded programming...
set where 0x12340
poke $where [expr {[peek $where] + 1}]
Have great care with this sort of code; the damage you can do by writing to random locations is considerable and being able to read from anywhere could allow information to flow to otherwise unauthorized programs.
Toka
Get the Address
The default behaviour of a data element in Toka is to return its address. This makes obtaining the address trivial:
variable foo foo .
Set the Address
You can manually assign a name to any memory address (or other number), but you should make sure it's part of allocated memory first.
hex abcdef is-data foo foo .
VBA
The VarPtr function allows one to get the address of a variable. There are also functions to peek/poke values at a given address.
Option Explicit
Declare Sub GetMem1 Lib "msvbvm60" (ByVal ptr As Long, ByRef x As Byte)
Declare Sub GetMem2 Lib "msvbvm60" (ByVal ptr As Long, ByRef x As Integer)
Declare Sub GetMem4 Lib "msvbvm60" (ByVal ptr As Long, ByRef x As Long)
Declare Sub PutMem1 Lib "msvbvm60" (ByVal ptr As Long, ByVal x As Byte)
Declare Sub PutMem2 Lib "msvbvm60" (ByVal ptr As Long, ByVal x As Integer)
Declare Sub PutMem4 Lib "msvbvm60" (ByVal ptr As Long, ByVal x As Long)
Sub Test()
Dim a As Long, ptr As Long, s As Long
a = 12345678
'Get and print address
ptr = VarPtr(a)
Debug.Print ptr
'Peek
Call GetMem4(ptr, s)
Debug.Print s
'Poke
Call PutMem4(ptr, 87654321)
Debug.Print a
End Sub
Visual Basic .NET
Visual Basic uses managed memory that can be moved around at any time. If a memory address for a variable is needed, the address is created first and then its contents copied.
Get the Address
Allocates a stable address in unmanaged memory, copies a variable to it, then returns the address itself.
Dim x = 5 Dim ptrX As IntPtr ptrX = Marshal.AllocHGlobal(Marshal.SizeOf(GetType(Integer))) Marshal.StructureToPtr(5, ptrX, False) Dim addressX = ptrX.ToInt64
Set the Address
Sets the pointer to the address A100 in hex.
Dim ptrX As New IntPtr(&HA100)
Wart
addr.x
=> 27975840
addr
is guaranteed to provide a stable identifier for this session. The address is just a number like any other and you can perform all the arithmetic you like on it. However, there's no way to dereference an address back into a value, so this is not pointer arithmetic. The primary use of addr
is to check if two objects are the same and not just copies, like Common Lisp's eq
operator.
if (addr.x = addr.y)
..
As a result, Wart has only one way to compare values: by default two objects are considered equal if they are structurally isomorphic. (You can override it if you want a different behavior.)
Wren
In Wren, with the exception of the built-in types Num, Bool and Null which hold their values directly, variables always contain an 8 byte pointer to where their actual data is stored on the heap.
However, there is no way to get or set the address of a variable and, since memory management is completely automatic, it is difficult to think of circumstances where this would be useful.
You can, of course, assign a variable of one reference type to another which under the hood copies the pointer so that both variables access the same data store.
var a = [1, 2, 3, 4]
var b = a // now 'a' and 'b' both point to the same List data
b[3] = 5
System.print("'b' is %(b)")
System.print("'a' is %(a)") // the previous change is of course reflected in 'a' as well
var t = Object.same(a, b) // tells you whether 'a' and 'b' refer to the same object in memory
System.print("'a' and 'b' are the same object? %(t ? "yes" : "no")")
- Output:
'b' is [1, 2, 3, 5] 'a' is [1, 2, 3, 5] 'a' and 'b' are the same object? yes
X86 Assembly
For SVR4 Unix-like style assembler the address of a variable is its symbol. (On some systems the names of C language variables have an extra leading underscore.)
movl my_variable, %eax
For SVR4 style code destined for a shared library it's necessary to fetch the address from the global offset table to ensure position independent code. That table is found relative to the program counter using the special _GLOBAL_OFFSET_TABLE_
(or on some systems extra leading underscore __GLOBAL_OFFSET_TABLE_
). The C compiler normally does this in %ebx
but for hand-crafted assembler anything equivalent is possible.
call eip_to_eax
addl $_GLOBAL_OFFSET_TABLE_, %eax
movl my_variable@GOT(%eax), %eax
...
eip_to_eax:
movl (%esp), %eax
ret
XLISP
To get the address in the heap of a variable X
, use:
(%ADDRESS-OF X)
If by "setting the address" we mean compelling the system to store a variable at a particular address of our choosing, then there is no easy way to do that.
XPL0
It is easy to get the address of a variable (relative to the beginning of its data segment), but there is no way to set the address of a variable. However, pointers can be used to access specific addresses. The example shows how the pointer B(0) is used to access the variable A and set it to hex 1234ABCD. The Peek and Poke intrinsics can be used to access specific hardware addresses. The absolute hardware address of a program's data segment can be obtained using the GetReg intrinsic. The '@' operator works exactly like 'addr' for integers but returns a 'real' pointer, instead of a 32-bit relative address, when used on a 'real' variable.
include c:\cxpl\codes;
int A, B;
[B:= addr A;
HexOut(0, B); CrLf(0);
B(0):= $1234ABCD;
HexOut(0, A); CrLf(0);
]
- Output:
00000F48 1234ABCD
Yorick
Yorick has pointers, but they are typically used in an opaque fashion. Pointer arithmetic is not supported, not is referencing arbitrary memory locations. However, a pointer address may be copied to other variables. Here is an interactive example that illustrates some of this.
> foo = 1 > bar = &foo > bar 0x15f42c18 > baz = bar > *baz = 5 > *bar 5 > *baz 5
Z80 Assembly
A variable's address is known in advance if the programmer is writing the assembly code themselves. In order to load from a variable, the address must be specified as an operand. So "getting the address" doesn't really apply to Z80 Assembly.
Setting an address is just storing a register into memory. There are several ways to do this:
Specifying a Memory Location
Only the accumulator A
can do this. If you want to store another 8-bit register's contents directly into memory, you'll need to load that register's contents into A
first:
foo equ &C000
bar equ &C001
ld (foo),a ;store A into memory location &C000
ld a,b ;copy B to A
ld (bar),a ;store "B" into memory location &C001
Using BC or DE
Only the accumulator A
can do this. If you want to store another 8-bit register's contents into the address pointed to by BC or DE, you'll need to load that register's contents into A
first:
foo equ &C000
bar equ &C001
ld bc,foo ;notice the lack of parentheses here. This is important.
ld (bc),a
ld de,bar
ld (de),a
Using HL
The 8-bit registers A,B,C,D,E
can all do this. H and L cannot, unless the value being stored happens to equal that "half" of the memory location.
foo equ &C000
bar equ &C001
ld hl,foo
ld (hl),b ;store the contents of B into foo
;since bar just happens to equal foo+1, we can do this:
inc hl
ld (hl),c ;store the contents of C into bar
16-Bit Values into A Specified Memory Location
Storing a 16-Bit value is a little more complicated. The registers BC,DE,HL,IX,IY,SP
can all do this, with a specified memory location. The "low byte" of the register (C, E, L, IXL, IYL,
and the low byte of SP
) are stored at the memory location specified in parentheses, and the "high byte" of the register (B, D, H, IXH, IYH,
and the high byte of SP
) are stored in the memory location after that. The Game Boy/Sharp LR35902 can only do this with SP, and no other registers.
foo equ &C000
bar equ &C001
ld (foo),bc ;store C into "foo" and B into "bar"
Beware! In this example, the second instruction clobbers part of the first. It's important to be careful when storing 16-bit values into memory.
foo equ &C000
bar equ &C001
ld (foo),de ;store E into &C000 and D into &C001
ld (bar),bc ;store C into &C001 and B into &C002
Zig
const std = @import("std");
pub fn main() !void {
const stdout = std.io.getStdOut().writer();
var i: i32 = undefined;
var address_of_i: *i32 = &i;
try stdout.print("{x}\n", .{@ptrToInt(address_of_i)});
}