Map range
You are encouraged to solve this task according to the task description, using any language you may know.
Given two ranges:
- and
- ;
- then a value in range
- is linearly mapped to a value in range
where:
- Task
Write a function/subroutine/... that takes two ranges and a real number, and returns the mapping of the real number from the first to the second range.
Use this function to map values from the range [0, 10]
to the range [-1, 0].
- Extra credit
Show additional idiomatic ways of performing the mapping, using tools available to the language.
ACL2
<lang Lisp>(defun mapping (a1 a2 b1 b2 s)
(+ b1 (/ (* (- s a1) (- b2 b1)) (- a2 a1))))
(defun map-each (a1 a2 b1 b2 ss)
(if (endp ss) nil (cons (mapping a1 a2 b1 b2 (first ss)) (map-each a1 a2 b1 b2 (rest ss)))))
(map-each 0 10 -1 0 '(0 1 2 3 4 5 6 7 8 9 10))
- (-1 -9/10 -4/5 -7/10 -3/5 -1/2 -2/5 -3/10 -1/5 -1/10 0)
</lang>
Ada
<lang Ada>with Ada.Text_IO; procedure Map is
type First_Range is new Float range 0.0 .. 10.0; type Second_Range is new Float range -1.0 .. 0.0; function Translate (Value : First_Range) return Second_Range is B1 : Float := Float (Second_Range'First); B2 : Float := Float (Second_Range'Last); A1 : Float := Float (First_Range'First); A2 : Float := Float (First_Range'Last); Result : Float; begin Result := B1 + (Float (Value) - A1) * (B2 - B1) / (A2 - A1); return Second_Range (Result); end; function Translate (Value : Second_Range) return First_Range is B1 : Float := Float (First_Range'First); B2 : Float := Float (First_Range'Last); A1 : Float := Float (Second_Range'First); A2 : Float := Float (Second_Range'Last); Result : Float; begin Result := B1 + (Float (Value) - A1) * (B2 - B1) / (A2 - A1); return First_Range (Result); end; Test_Value : First_Range := First_Range'First;
begin
loop Ada.Text_IO.Put_Line (First_Range'Image (Test_Value) & " maps to: " & Second_Range'Image (Translate (Test_Value))); exit when Test_Value = First_Range'Last; Test_Value := Test_Value + 1.0; end loop;
end Map;</lang>
- Output:
0.00000E+00 maps to: -1.00000E+00 1.00000E+00 maps to: -9.00000E-01 2.00000E+00 maps to: -8.00000E-01 3.00000E+00 maps to: -7.00000E-01 4.00000E+00 maps to: -6.00000E-01 5.00000E+00 maps to: -5.00000E-01 6.00000E+00 maps to: -4.00000E-01 7.00000E+00 maps to: -3.00000E-01 8.00000E+00 maps to: -2.00000E-01 9.00000E+00 maps to: -1.00000E-01 1.00000E+01 maps to: 0.00000E+00
ALGOL 68
<lang algol68># maps a real s in the range [ a1, a2 ] to the range [ b1, b2 ] #
- there are no checks that s is in the range or that the ranges are valid #
PROC map range = ( REAL s, a1, a2, b1, b2 )REAL:
b1 + ( ( s - a1 ) * ( b2 - b1 ) ) / ( a2 - a1 );
- test the mapping #
FOR i FROM 0 TO 10 DO
print( ( whole( i, -2 ), " maps to ", fixed( map range( i, 0, 10, -1, 0 ), -8, 2 ), newline ) )
OD</lang>
- Output:
0 maps to -1.00 1 maps to -0.90 2 maps to -0.80 3 maps to -0.70 4 maps to -0.60 5 maps to -0.50 6 maps to -0.40 7 maps to -0.30 8 maps to -0.20 9 maps to -0.10 10 maps to 0.00
AppleScript
<lang applescript>-- rangeMap :: (Num, Num) -> (Num, Num) -> Num -> Num on rangeMap(a, b)
script on |λ|(s) set {a1, a2} to a set {b1, b2} to b b1 + ((s - a1) * (b2 - b1)) / (a2 - a1) end |λ| end script
end rangeMap
-- TEST ---------------------------------------------------
on run
set mapping to rangeMap({0, 10}, {-1, 0}) set xs to enumFromTo(0, 10) set ys to map(mapping, xs) set zs to map(approxRatio(0), ys) unlines(zipWith3(formatted, xs, ys, zs))
end run
-- DISPLAY ------------------------------------------------
-- formatted :: Int -> Float -> Ratio -> String on formatted(x, m, r)
set fract to showRatio(r) set {n, d} to splitOn("/", fract) (justifyRight(2, space, x as string) & " -> " & ¬ justifyRight(4, space, m as string)) & " = " & ¬ justifyRight(2, space, n) & "/" & d
end formatted
-- GENERIC ABSTRACTIONS -----------------------------------
-- https://github.com/RobTrew/prelude-applescript
-- Absolute value. -- abs :: Num -> Num on abs(x)
if 0 > x then -x else x end if
end abs
-- approxRatio :: Real -> Real -> Ratio on approxRatio(epsilon)
script on |λ|(n) if {real, integer} contains (class of epsilon) and 0 < epsilon then set e to epsilon else set e to 1 / 10000 end if script gcde on |λ|(e, x, y) script _gcd on |λ|(a, b) if b < e then a else |λ|(b, a mod b) end if end |λ| end script |λ|(abs(x), abs(y)) of _gcd end |λ| end script set c to |λ|(e, 1, n) of gcde ratio((n div c), (1 div c)) end |λ| end script
end approxRatio
-- enumFromTo :: Int -> Int -> [Int] on enumFromTo(m, n)
if m ≤ n then set lst to {} repeat with i from m to n set end of lst to i end repeat return lst else return {} end if
end enumFromTo
-- gcd :: Int -> Int -> Int on gcd(a, b)
set x to abs(a) set y to abs(b) repeat until y = 0 if x > y then set x to x - y else set y to y - x end if end repeat return x
end gcd
-- justifyLeft :: Int -> Char -> String -> String on justifyLeft(n, cFiller, strText)
if n > length of strText then text 1 thru n of (strText & replicate(n, cFiller)) else strText end if
end justifyLeft
-- justifyRight :: Int -> Char -> String -> String on justifyRight(n, cFiller, strText)
if n > length of strText then text -n thru -1 of ((replicate(n, cFiller) as text) & strText) else strText end if
end justifyRight
-- length :: [a] -> Int on |length|(xs)
set c to class of xs if list is c or string is c then length of xs else (2 ^ 29 - 1) -- (maxInt - simple proxy for non-finite) end if
end |length|
-- Lift 2nd class handler function into 1st class script wrapper -- mReturn :: First-class m => (a -> b) -> m (a -> b) on mReturn(f)
if class of f is script then f else script property |λ| : f end script end if
end mReturn
-- map :: (a -> b) -> [a] -> [b] on map(f, xs)
tell mReturn(f) set lng to length of xs set lst to {} repeat with i from 1 to lng set end of lst to |λ|(item i of xs, i, xs) end repeat return lst end tell
end map
-- minimum :: Ord a => [a] -> a on minimum(xs)
set lng to length of xs if lng < 1 then return missing value set m to item 1 of xs repeat with x in xs set v to contents of x if v < m then set m to v end repeat return m
end minimum
-- ratio :: Int -> Int -> Ratio Int on ratio(x, y)
script go on |λ|(x, y) if 0 ≠ y then if 0 ≠ x then set d to gcd(x, y) {type:"Ratio", n:(x div d), d:(y div d)} else {type:"Ratio", n:0, d:1} end if else missing value end if end |λ| end script go's |λ|(x * (signum(y)), abs(y))
end ratio
-- Egyptian multiplication - progressively doubling a list, appending -- stages of doubling to an accumulator where needed for binary -- assembly of a target length -- replicate :: Int -> a -> [a] on replicate(n, a)
set out to {} if n < 1 then return out set dbl to {a} repeat while (n > 1) if (n mod 2) > 0 then set out to out & dbl set n to (n div 2) set dbl to (dbl & dbl) end repeat return out & dbl
end replicate
-- showRatio :: Ratio -> String on showRatio(r)
(n of r as string) & "/" & (d of r as string)
end showRatio
-- signum :: Num -> Num on signum(x)
if x < 0 then -1 else if x = 0 then 0 else 1 end if
end signum
-- splitOn :: String -> String -> [String] on splitOn(pat, src)
set {dlm, my text item delimiters} to ¬ {my text item delimiters, pat} set xs to text items of src set my text item delimiters to dlm return xs
end splitOn
-- take :: Int -> [a] -> [a] -- take :: Int -> String -> String on take(n, xs)
set c to class of xs if list is c then if 0 < n then items 1 thru min(n, length of xs) of xs else {} end if else if string is c then if 0 < n then text 1 thru min(n, length of xs) of xs else "" end if else if script is c then set ys to {} repeat with i from 1 to n set v to xs's |λ|() if missing value is v then return ys else set end of ys to v end if end repeat return ys else missing value end if
end take
-- unlines :: [String] -> String on unlines(xs)
set {dlm, my text item delimiters} to ¬ {my text item delimiters, linefeed} set str to xs as text set my text item delimiters to dlm str
end unlines
-- zipWith3 :: (a -> b -> c -> d) -> [a] -> [b] -> [c] -> [d] on zipWith3(f, xs, ys, zs)
set lng to minimum({length of xs, length of ys, length of zs}) if 1 > lng then return {} set lst to {} tell mReturn(f) repeat with i from 1 to lng set end of lst to |λ|(item i of xs, item i of ys, item i of zs) end repeat return lst end tell
end zipWith3</lang>
- Output:
0 -> -1.0 = -1/1 1 -> -0.9 = -9/10 2 -> -0.8 = -4/5 3 -> -0.7 = -7/10 4 -> -0.6 = -3/5 5 -> -0.5 = -1/2 6 -> -0.4 = -2/5 7 -> -0.3 = -3/10 8 -> -0.2 = -1/5 9 -> -0.1 = -1/10 10 -> 0.0 = 0/1
AutoHotkey
<lang AutoHotkey> mapRange(a1, a2, b1, b2, s) { return b1 + (s-a1)*(b2-b1)/(a2-a1) }
out := "Mapping [0,10] to [-1,0] at intervals of 1:`n"
Loop 11 out .= "f(" A_Index-1 ") = " mapRange(0,10,-1,0,A_Index-1) "`n" MsgBox % out </lang>
Axiom
Axiom provides a Segment domain for intervals. The following uses a closure for a mapRange function over fields, which provides for some generality. <lang Axiom>)abbrev package TESTP TestPackage TestPackage(R:Field) : with
mapRange: (Segment(R), Segment(R)) -> (R->R) == add mapRange(fromRange, toRange) == (a1,a2,b1,b2) := (lo fromRange,hi fromRange,lo toRange,hi toRange) (x:R):R +-> b1+(x-a1)*(b2-b1)/(a2-a1)</lang>
Use:<lang Axiom>f := mapRange(1..10,a..b) [(xi,f xi) for xi in 1..10]</lang>
- Output:
b + 8a 2b + 7a b + 2a 4b + 5a 5b + 4a [(1,a), (2,------), (3,-------), (4,------), (5,-------), (6,-------), 9 9 3 9 9 2b + a 7b + 2a 8b + a (7,------), (8,-------), (9,------), (10,b)] 3 9 9 Type: List(Tuple(Fraction(Polynomial(Integer))))
AWK
<lang AWK>
- syntax: GAWK -f MAP_RANGE.AWK
BEGIN {
a1 = 0 a2 = 10 b1 = -1 b2 = 0 for (i=a1; i<=a2; i++) { printf("%g maps to %g\n",i,map_range(a1,a2,b1,b2,i)) } exit(0)
} function map_range(a1,a2,b1,b2,num) {
return b1 + ((num-a1) * (b2-b1) / (a2-a1))
} </lang>
- Output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
BASIC
BBC BASIC
<lang bbcbasic> @% = 5 : REM Column width
DIM range{l, h} DIM A{} = range{}, B{} = range{} A.l = 0 : A.h = 10 B.l = -1 : B.h = 0 FOR n = 0 TO 10 PRINT n " maps to " FNmaprange(A{}, B{}, n) NEXT END DEF FNmaprange(a{}, b{}, s) = b.l + (s - a.l) * (b.h - b.l) / (a.h - a.l)</lang>
- Output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
Commodore BASIC
<lang commodorebasic>10 REM MAP RANGE 20 REM COMMODORE BASIC 2.0 30 REM ================================ 40 A1 = 0 : A2 = 10 50 B1 = -1 : B2 = 0 60 DEF FN MR(S)=B1+(S-A1)*(B2-B1)/(A2-A1) 70 FOR S=0 TO 10 80 PRINT S;"MAPS TO ";FN MR(S) 90 NEXT</lang>
- Output:
0 MAPS TO -1 1 MAPS TO -.9 2 MAPS TO -.8 3 MAPS TO -.7 4 MAPS TO -.6 5 MAPS TO -.5 6 MAPS TO -.4 7 MAPS TO -.3 8 MAPS TO -.2 9 MAPS TO -.1 10 MAPS TO 0
IS-BASIC
<lang IS-BASIC>100 PROGRAM "MapRange.bas" 110 LET A1=0:LET A2=10 120 LET B1=-1:LET B2=0 130 DEF MR(S)=B1+(S-A1)*(B2-B1)/(A2-A1) 140 FOR I=0 TO 10 150 PRINT I;"maps to ";MR(I) 160 NEXT</lang>
bc
<lang bc>/* map s from [a, b] to [c, d] */ define m(a, b, c, d, s) { return (c + (s - a) * (d - c) / (b - a)) }
scale = 6 /* division to 6 decimal places */ "[0, 10] => [-1, 0] " for (i = 0; i <= 10; i += 2) { /*
* If your bc(1) has a print statement, you can try
* print i, " => ", m(0, 10, -1, 0, i), "\n" */ i; " => "; m(0, 10, -1, 0, i) } quit</lang>
- Output:
[0, 10] => [-1, 0] 0 => -1.000000 2 => -.800000 4 => -.600000 6 => -.400000 8 => -.200000 10 => 0.000000
Bracmat
<lang bracmat>( ( mapRange
= a1,a2,b1,b2,s . !arg:(?a1,?a2.?b1,?b2.?s) & !b1+(!s+-1*!a1)*(!b2+-1*!b1)*(!a2+-1*!a1)^-1 )
& out$"Mapping [0,10] to [-1,0] at intervals of 1:" & 0:?n & whl
' ( !n:~>10 & out$("f(" !n ") = " flt$(mapRange$(0,10.-1,0.!n),2)) & 1+!n:?n )
);</lang>
- Output:
Mapping [0,10] to [-1,0] at intervals of 1: f( 0 ) = -1,00*10E0 f( 1 ) = -9,00*10E-1 f( 2 ) = -8,00*10E-1 f( 3 ) = -7,00*10E-1 f( 4 ) = -6,00*10E-1 f( 5 ) = -5,00*10E-1 f( 6 ) = -4,00*10E-1 f( 7 ) = -3,00*10E-1 f( 8 ) = -2,00*10E-1 f( 9 ) = -1,00*10E-1 f( 10 ) = 0
C
<lang C>#include <stdio.h>
double mapRange(double a1,double a2,double b1,double b2,double s) { return b1 + (s-a1)*(b2-b1)/(a2-a1); }
int main() { int i; puts("Mapping [0,10] to [-1,0] at intervals of 1:");
for(i=0;i<=10;i++) { printf("f(%d) = %g\n",i,mapRange(0,10,-1,0,i)); }
return 0; } </lang>
- Output:
Mapping [0,10] to [-1,0] at intervals of 1: f(0) = -1 f(1) = -0.9 f(2) = -0.8 f(3) = -0.7 f(4) = -0.6 f(5) = -0.5 f(6) = -0.4 f(7) = -0.3 f(8) = -0.2 f(9) = -0.1 f(10) = 0
C#
<lang csharp>using System; using System.Linq;
public class MapRange {
public static void Main() { foreach (int i in Enumerable.Range(0, 11)) Console.WriteLine($"{i} maps to {Map(0, 10, -1, 0, i)}"); } static double Map(double a1, double a2, double b1, double b2, double s) => b1 + (s - a1) * (b2 - b1) / (a2 - a1);
}</lang>
- Output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
C++
This example defines a template function to handle the mapping, using two std::pair objects to define the source and destination ranges. It returns the provided value mapped into the target range.
It's not written efficiently; certainly, there can be fewer explicit temporary variables. The use of the template offers a choice in types for precision and accuracy considerations, though one area for improvement might be to allow a different type for intermediate calculations.
<lang cpp>#include <iostream>
- include <utility>
template<typename tVal> tVal map_value(std::pair<tVal,tVal> a, std::pair<tVal, tVal> b, tVal inVal) {
tVal inValNorm = inVal - a.first; tVal aUpperNorm = a.second - a.first; tVal normPosition = inValNorm / aUpperNorm;
tVal bUpperNorm = b.second - b.first; tVal bValNorm = normPosition * bUpperNorm; tVal outVal = b.first + bValNorm;
return outVal;
}
int main() {
std::pair<float,float> a(0,10), b(-1,0);
for(float value = 0.0; 10.0 >= value; ++value) std::cout << "map_value(" << value << ") = " << map_value(a, b, value) << std::endl;
return 0;
}</lang>
- Output:
map_value(0) = -1 map_value(1) = -0.9 map_value(2) = -0.8 map_value(3) = -0.7 map_value(4) = -0.6 map_value(5) = -0.5 map_value(6) = -0.4 map_value(7) = -0.3 map_value(8) = -0.2 map_value(9) = -0.1 map_value(10) = 0
Clojure
<lang clojure> (defn maprange [[a1 a2] [b1 b2] s] (+ b1 (/ (* (- s a1) (- b2 b1)) (- a2 a1))))
> (doseq [s (range 11)]
(printf "%2s maps to %s\n" s (maprange [0 10] [-1 0] s)))
0 maps to -1 1 maps to -9/10 2 maps to -4/5 3 maps to -7/10 4 maps to -3/5 5 maps to -1/2 6 maps to -2/5 7 maps to -3/10 8 maps to -1/5 9 maps to -1/10
10 maps to 0 </lang>
COBOL
<lang cobol> IDENTIFICATION DIVISION.
PROGRAM-ID. demo-map-range.
DATA DIVISION. WORKING-STORAGE SECTION. 01 i USAGE FLOAT-LONG.
01 mapped-num USAGE FLOAT-LONG.
01 a-begin USAGE FLOAT-LONG VALUE 0. 01 a-end USAGE FLOAT-LONG VALUE 10.
01 b-begin USAGE FLOAT-LONG VALUE -1. 01 b-end USAGE FLOAT-LONG VALUE 0.
01 i-display PIC --9.9. 01 mapped-display PIC --9.9.
PROCEDURE DIVISION. PERFORM VARYING i FROM 0 BY 1 UNTIL i > 10 CALL "map-range" USING CONTENT a-begin, a-end, b-begin, b-end, i, REFERENCE mapped-num COMPUTE i-display ROUNDED = i COMPUTE mapped-display ROUNDED = mapped-num DISPLAY FUNCTION TRIM(i-display) " maps to " FUNCTION TRIM(mapped-display) END-PERFORM . END PROGRAM demo-map-range.
IDENTIFICATION DIVISION. PROGRAM-ID. map-range.
DATA DIVISION. LINKAGE SECTION. 01 a-begin USAGE FLOAT-LONG. 01 a-end USAGE FLOAT-LONG.
01 b-begin USAGE FLOAT-LONG. 01 b-end USAGE FLOAT-LONG.
01 val-to-map USAGE FLOAT-LONG.
01 ret USAGE FLOAT-LONG.
PROCEDURE DIVISION USING a-begin, a-end, b-begin, b-end, val-to-map, ret. COMPUTE ret = b-begin + ((val-to-map - a-begin) * (b-end - b-begin) / (a-end - a-begin)) . END PROGRAM map-range.</lang>
The output is identical to the output of the Common Lisp example.
CoffeeScript
<lang CoffeeScript > mapRange = (a1,a2,b1,b2,s) ->
t = b1 + ((s-a1)*(b2 - b1)/(a2-a1))
for s in [0..10]
console.log("#{s} maps to #{mapRange(0,10,-1,0,s)}")
</lang>
- Output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.30000000000000004 8 maps to -0.19999999999999996 9 maps to -0.09999999999999998 10 maps to 0
Common Lisp
<lang lisp>(defun map-range (a1 a2 b1 b2 s)
(+ b1 (/ (* (- s a1)
(- b2 b1)) (- a2 a1))))
(loop
for i from 0 to 10 do (format t "~F maps to ~F~C" i
(map-range 0 10 -1 0 i) #\Newline))</lang>
- Output:
0.0 maps to -1.0 1.0 maps to -0.9 2.0 maps to -0.8 3.0 maps to -0.7 4.0 maps to -0.6 5.0 maps to -0.5 6.0 maps to -0.4 7.0 maps to -0.3 8.0 maps to -0.2 9.0 maps to -0.1 10.0 maps to 0.0
D
<lang d>double mapRange(in double[] a, in double[] b, in double s) pure nothrow @nogc {
return b[0] + ((s - a[0]) * (b[1] - b[0]) / (a[1] - a[0]));
}
void main() {
import std.stdio;
immutable r1 = [0.0, 10.0]; immutable r2 = [-1.0, 0.0]; foreach (immutable s; 0 .. 11) writefln("%2d maps to %5.2f", s, mapRange(r1, r2, s));
}</lang>
- Output:
0 maps to -1.00 1 maps to -0.90 2 maps to -0.80 3 maps to -0.70 4 maps to -0.60 5 maps to -0.50 6 maps to -0.40 7 maps to -0.30 8 maps to -0.20 9 maps to -0.10 10 maps to 0.00
EchoLisp
EchoLisp provides several native interpolation functions: smoothstep, s-curve, .. and linear which performs linear interpolation. <lang scheme> (lib 'plot) ;; interpolation functions (lib 'compile)
- rational version
(define (q-map-range x xmin xmax ymin ymax) (+ ymin (/ ( * (- x xmin) (- ymax ymin)) (- xmax xmin))))
- float version
(define (map-range x xmin xmax ymin ymax) (+ ymin (// ( * (- x xmin) (- ymax ymin)) (- xmax xmin))))
- accelerate it
(compile 'map-range "-vf")
(q-map-range 4 0 10 -1 0)
→ -3/5
(map-range 4 0 10 -1 0)
→ -0.6
(linear 4 0 10 -1 0) ;; native
→ -0.6
(for [(x (in-range 0 10))] (writeln x (q-map-range x 0 10 -1 0) (map-range x 0 10 -1 0)))
0 -1 -1 1 -9/10 -0.9 2 -4/5 -0.8 3 -7/10 -0.7 4 -3/5 -0.6 5 -1/2 -0.5 6 -2/5 -0.4 7 -3/10 -0.3 8 -1/5 -0.2 9 -1/10 -0.1 </lang>
Elixir
<lang elixir>defmodule RC do
def map_range(a1 .. a2, b1 .. b2, s) do b1 + (s - a1) * (b2 - b1) / (a2 - a1) end
end
Enum.each(0..10, fn s ->
:io.format "~2w map to ~7.3f~n", [s, RC.map_range(0..10, -1..0, s)]
end)</lang>
- Output:
0 map to -1.000 1 map to -0.900 2 map to -0.800 3 map to -0.700 4 map to -0.600 5 map to -0.500 6 map to -0.400 7 map to -0.300 8 map to -0.200 9 map to -0.100 10 map to 0.000
Emacs Lisp
<lang lisp>(defun maprange (a1 a2 b1 b2 s)
(+ b1 (/ (* (- s a1) (- b2 b1)) (- a2 a1))))
(dotimes (i 10)
(princ (maprange 0.0 10.0 -1.0 0.0 i)) (terpri))</lang>
Erlang
<lang erlang>-module(map_range). -export([map_value/3]).
map_value({A1,A2},{B1,B2},S) ->
B1 + (S - A1) * (B2 - B1) / (A2 - A1).
</lang>
ERRE
<lang ERRE>PROGRAM RANGE
BEGIN
AL=0 AH=10 BL=-1 BH=0 FOR N=0 TO 10 DO RANGE=BL+(N-AL)*(BH-BL)/(AH-AL) WRITE("### maps to ##.##";N;RANGE)
! PRINT(N;" maps to ";RANGE)
END FOR
END PROGRAM </lang>
- Output:
0 maps to -1.00 1 maps to -0.90 2 maps to -0.80 3 maps to -0.70 4 maps to -0.60 5 maps to -0.50 6 maps to -0.40 7 maps to -0.30 8 maps to -0.20 9 maps to -0.10 10 maps to 0.00
Euphoria
<lang euphoria>function map_range(sequence a, sequence b, atom s)
return b[1]+(s-a[1])*(b[2]-b[1])/(a[2]-a[1])
end function
for i = 0 to 10 do
printf(1, "%2g maps to %4g\n", {i, map_range({0,10},{-1,0},i)})
end for</lang>
- Output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
Factor
<lang factor>USE: locals
- map-range ( a1 a2 b1 b2 x -- y )
x a1 - b2 b1 - * a2 a1 - / b1 + ;</lang>
Or: <lang factor>USING: locals infix ;
- map-range ( a1 a2 b1 b2 x -- y )
[infix b1 + (x - a1) * (b2 - b1) / (a2 - a1) infix] ;</lang>
Test run: <lang factor>10 iota [| x | 0 10 -1 0 x map-range ] map . ! { -1 -9/10 -4/5 -7/10 -3/5 -1/2 -2/5 -3/10 -1/5 -1/10 }</lang>
Fantom
<lang fantom> class FRange {
const Float low const Float high // in constructing a range, ensure the low value is smaller than high new make (Float low, Float high) { this.low = ( low <= high ? low : high ) this.high = ( low <= high ? high : low ) }
// return range as a string override Str toStr () { "[$low,$high]" } // return a point in given range interpolated into this range Float remap (Float point, FRange given) { this.low + (point - given.low) * (this.high - this.low) / (given.high - given.low) }
}
class Main {
public static Void main () { range1 := FRange (0f, 10f) range2 := FRange (-1f, 0f) 11.times |Int n| { m := range2.remap (n.toFloat, range1) echo ("Value $n in ${range1} maps to $m in ${range2}") } }
} </lang>
- Output:
Value 0 in [0.0,10.0] maps to -1.0 in [-1.0,0.0] Value 1 in [0.0,10.0] maps to -0.9 in [-1.0,0.0] Value 2 in [0.0,10.0] maps to -0.8 in [-1.0,0.0] Value 3 in [0.0,10.0] maps to -0.7 in [-1.0,0.0] Value 4 in [0.0,10.0] maps to -0.6 in [-1.0,0.0] Value 5 in [0.0,10.0] maps to -0.5 in [-1.0,0.0] Value 6 in [0.0,10.0] maps to -0.4 in [-1.0,0.0] Value 7 in [0.0,10.0] maps to -0.30000000000000004 in [-1.0,0.0] Value 8 in [0.0,10.0] maps to -0.19999999999999996 in [-1.0,0.0] Value 9 in [0.0,10.0] maps to -0.09999999999999998 in [-1.0,0.0] Value 10 in [0.0,10.0] maps to 0.0 in [-1.0,0.0]
Forth
<lang forth>\ linear interpolation
- lerp ( b2 b1 a2 a1 s -- t )
fover f- frot frot f- f/ frot frot fswap fover f- frot f* f+ ;
- test 11 0 do 0e -1e 10e 0e i s>f lerp f. loop ;</lang>
There is less stack shuffling if you use origin and range instead of endpoints for intervals. (o = a1, r = a2-a1)
<lang forth>: lerp ( o2 r2 r1 o1 s -- t ) fswap f- fswap f/ f* f+ ;
- test 11 0 do -1e 1e 10e 0e i s>f lerp f. loop ;</lang>
Fortran
<lang fortran>program Map
implicit none real :: t integer :: i
do i = 0, 10 t = Maprange((/0.0, 10.0/), (/-1.0, 0.0/), real(i)) write(*,*) i, " maps to ", t end do
contains
function Maprange(a, b, s)
real :: Maprange real, intent(in) :: a(2), b(2), s Maprange = (s-a(1)) * (b(2)-b(1)) / (a(2)-a(1)) + b(1)
end function Maprange end program Map</lang>
Go
Basic task <lang go>package main
import "fmt"
type rangeBounds struct {
b1, b2 float64
}
func mapRange(x, y rangeBounds, n float64) float64 {
return y.b1 + (n - x.b1) * (y.b2 - y.b1) / (x.b2 - x.b1)
}
func main() {
r1 := rangeBounds{0, 10} r2 := rangeBounds{-1, 0} for n := float64(0); n <= 10; n += 2 { fmt.Println(n, "maps to", mapRange(r1, r2, n)) }
}</lang>
- Output:
0 maps to -1 2 maps to -0.8 4 maps to -0.6 6 maps to -0.4 8 maps to -0.19999999999999996 10 maps to 0
Extra credit
First, a function literal replaces the mapping function specified by the basic task. This allows a simpler parameter signature and also allows things to be precomputed for efficiency. newMapRange checks the direction of the first range and if it is decreasing, reverses both ranges. This simplifies an out-of-range check in the function literal. Also, the slope and intercept of the linear function are computed. This allows the range mapping to use the slope intercept formula which is computationally more efficient that the two point formula.
Second, ", ok" is a Go idiom. It takes advantage of Go's multiple return values and multiple assignment to return a success/failure disposition. In the case of this task, the result t is undefined if the input s is out of range. <lang go>package main
import "fmt"
type rangeBounds struct {
b1, b2 float64
}
func newRangeMap(xr, yr rangeBounds) func(float64) (float64, bool) {
// normalize direction of ranges so that out-of-range test works if xr.b1 > xr.b2 { xr.b1, xr.b2 = xr.b2, xr.b1 yr.b1, yr.b2 = yr.b2, yr.b1 } // compute slope, intercept m := (yr.b2 - yr.b1) / (xr.b2 - xr.b1) b := yr.b1 - m*xr.b1 // return function literal return func(x float64) (y float64, ok bool) { if x < xr.b1 || x > xr.b2 { return 0, false // out of range } return m*x + b, true }
}
func main() {
rm := newRangeMap(rangeBounds{0, 10}, rangeBounds{-1, 0}) for s := float64(-2); s <= 12; s += 2 { t, ok := rm(s) if ok { fmt.Printf("s: %5.2f t: %5.2f\n", s, t) } else { fmt.Printf("s: %5.2f out of range\n", s) } }
}</lang>
- Output:
s: -2.00 out of range s: 0.00 t: -1.00 s: 2.00 t: -0.80 s: 4.00 t: -0.60 s: 6.00 t: -0.40 s: 8.00 t: -0.20 s: 10.00 t: 0.00 s: 12.00 out of range
Groovy
<lang groovy> def mapRange(a1, a2, b1, b2, s) {
b1 + ((s - a1) * (b2 - b1)) / (a2 - a1)
}
(0..10).each { s ->
println(s + " in [0, 10] maps to " + mapRange(0, 10, -1, 0, s) + " in [-1, 0].")
} </lang>
- Output:
0 in [0, 10] maps to -1 in [-1, 0]. 1 in [0, 10] maps to -0.9 in [-1, 0]. 2 in [0, 10] maps to -0.8 in [-1, 0]. 3 in [0, 10] maps to -0.7 in [-1, 0]. 4 in [0, 10] maps to -0.6 in [-1, 0]. 5 in [0, 10] maps to -0.5 in [-1, 0]. 6 in [0, 10] maps to -0.4 in [-1, 0]. 7 in [0, 10] maps to -0.3 in [-1, 0]. 8 in [0, 10] maps to -0.2 in [-1, 0]. 9 in [0, 10] maps to -0.1 in [-1, 0]. 10 in [0, 10] maps to 0 in [-1, 0].
Haskell
Rather than handling only floating point numbers, the mapping function takes any number implementing the Fractional typeclass, which in our example also includes exact Rational numbers. <lang haskell>import Data.Ratio import Text.Printf (PrintfType, printf)
-- Map a value from the range [a1,a2] to the range [b1,b2]. We don't check -- for empty ranges. mapRange
:: Fractional a => (a, a) -> (a, a) -> a -> a
mapRange (a1, a2) (b1, b2) s = b1 + (s - a1) * (b2 - b1) / (a2 - a1)
main :: IO () main -- Perform the mapping over floating point numbers.
= do putStrLn "---------- Floating point ----------" mapM_ (\n -> prtD n . mapRange (0, 10) (-1, 0) $ fromIntegral n) [0 .. 10] -- Perform the same mapping over exact rationals. putStrLn "---------- Rationals ----------" mapM_ (\n -> prtR n . mapRange (0, 10) (-1, 0) $ n % 1) [0 .. 10] where prtD :: PrintfType r => Integer -> Double -> r prtD = printf "%2d -> %6.3f\n" prtR :: PrintfType r => Integer -> Rational -> r prtR n x = printf "%2d -> %s\n" n (show x)</lang>
- Output:
---------- Floating point ---------- 0 -> -1.000 1 -> -0.900 2 -> -0.800 3 -> -0.700 4 -> -0.600 5 -> -0.500 6 -> -0.400 7 -> -0.300 8 -> -0.200 9 -> -0.100 10 -> 0.000 ---------- Rationals ---------- 0 -> (-1) % 1 1 -> (-9) % 10 2 -> (-4) % 5 3 -> (-7) % 10 4 -> (-3) % 5 5 -> (-1) % 2 6 -> (-2) % 5 7 -> (-3) % 10 8 -> (-1) % 5 9 -> (-1) % 10 10 -> 0 % 1
Icon and Unicon
<lang Unicon> record Range(a, b)
- note, we force 'n' to be real, which means recalculation will
- be using real numbers, not integers
procedure remap (range1, range2, n : real)
if n < range2.a | n > range2.b then fail # n out of given range return range1.a + (n - range2.a) * (range1.b - range1.a) / (range2.b - range2.a)
end
procedure range_string (range)
return "[" || range.a || ", " || range.b || "]"
end
procedure main ()
range1 := Range (0, 10) range2 := Range (-1, 0) # if i is out of range1, then 'remap' fails, so only valid changes are written every i := -2 to 12 do { if m := remap (range2, range1, i) then write ("Value " || i || " in " || range_string (range1) || " maps to " || m || " in " || range_string (range2)) }
end </lang>
Icon does not permit the type declaration, as Unicon does. For Icon, replace 'remap' with:
<lang Icon> procedure remap (range1, range2, n)
n *:= 1.0 if n < range2.a | n > range2.b then fail # n out of given range return range1.a + (n - range2.a) * (range1.b - range1.a) / (range2.b - range2.a)
end </lang>
- Output:
Value 0 in [0, 10] maps to -1.0 in [-1, 0] Value 1 in [0, 10] maps to -0.9 in [-1, 0] Value 2 in [0, 10] maps to -0.8 in [-1, 0] Value 3 in [0, 10] maps to -0.7 in [-1, 0] Value 4 in [0, 10] maps to -0.6 in [-1, 0] Value 5 in [0, 10] maps to -0.5 in [-1, 0] Value 6 in [0, 10] maps to -0.4 in [-1, 0] Value 7 in [0, 10] maps to -0.3 in [-1, 0] Value 8 in [0, 10] maps to -0.2 in [-1, 0] Value 9 in [0, 10] maps to -0.1 in [-1, 0] Value 10 in [0, 10] maps to 0.0 in [-1, 0]
J
<lang j>maprange=:2 :0
'a1 a2'=.m 'b1 b2'=.n b1+((y-a1)*b2-b1)%a2-a1
) NB. this version defers all calculations to runtime, but mirrors exactly the task formulation</lang>
Or
<lang j>maprange=:2 :0
'a1 a2'=.m 'b1 b2'=.n b1 + ((b2-b1)%a2-a1) * -&a1
) NB. this version precomputes the scaling ratio</lang>
Example use:
<lang j> 2 4 maprange 5 11 (2.718282 3 3.141592) 7.15485 8 8.42478</lang>
or
<lang j> adjust=:2 4 maprange 5 11 NB. save the derived function as a named entity
adjust 2.718282 3 3.141592
7.15485 8 8.42478</lang>
Required example:
<lang j> 0 10 maprange _1 0 i.11 _1 _0.9 _0.8 _0.7 _0.6 _0.5 _0.4 _0.3 _0.2 _0.1 0</lang>
Java
<lang java>public class Range { public static void main(String[] args){ for(float s = 0;s <= 10; s++){ System.out.println(s + " in [0, 10] maps to "+ mapRange(0, 10, -1, 0, s)+" in [-1, 0]."); } }
public static double mapRange(double a1, double a2, double b1, double b2, double s){ return b1 + ((s - a1)*(b2 - b1))/(a2 - a1); } }</lang>
- Output:
0.0 in [0, 10] maps to -1.0 in [-1, 0]. 1.0 in [0, 10] maps to -0.9 in [-1, 0]. 2.0 in [0, 10] maps to -0.8 in [-1, 0]. 3.0 in [0, 10] maps to -0.7 in [-1, 0]. 4.0 in [0, 10] maps to -0.6 in [-1, 0]. 5.0 in [0, 10] maps to -0.5 in [-1, 0]. 6.0 in [0, 10] maps to -0.4 in [-1, 0]. 7.0 in [0, 10] maps to -0.30000000000000004 in [-1, 0]. 8.0 in [0, 10] maps to -0.19999999999999996 in [-1, 0]. 9.0 in [0, 10] maps to -0.09999999999999998 in [-1, 0]. 10.0 in [0, 10] maps to 0.0 in [-1, 0].
The differences in 7, 8, and 9 come from double math. Similar issues show even when using float types.
JavaScript
ES5
<lang JavaScript>// Javascript doesn't have built-in support for ranges // Insted we use arrays of two elements to represent ranges var mapRange = function(from, to, s) {
return to[0] + (s - from[0]) * (to[1] - to[0]) / (from[1] - from[0]);
};
var range = [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10]; for (var i = 0; i < range.length; i++) {
range[i] = mapRange([0, 10], [-1, 0], range[i]);
}
console.log(range);</lang>
- Output:
[-1, -0.9, -0.8, -0.7, -0.6, -0.5, -0.4, -0.30000000000000004, -0.19999999999999996, -0.09999999999999998, 0]
Extra credit
Here we will use the ECMAScript 5 support for map and the _.range function from Underscore.js.
<lang JavaScript>var mapRange = function(from, to, s) {
// mapRange expects ranges generated by _.range var a1 = from[0]; var a2 = from[from.length - 1]; var b1 = to[0]; var b2 = to[to.length - 1]; return b1 + (s - a1) * (b2 - b1) / (a2 - a1);
};
// The range function is exclusive var fromRange = _.range(0, 11); var toRange = _.range(-1, 1);
// .map constructs a new array fromRange = fromRange.map(function(s) {
return mapRange(fromRange, toRange, s);
});
console.log(fromRange);</lang>
- Output:
[-1, -0.9, -0.8, -0.7, -0.6, -0.5, -0.4, -0.30000000000000004, -0.19999999999999996, -0.09999999999999998, 0]
ES6
Composing a solution from generic abstractions: <lang javascript>(() => {
'use strict';
// main :: IO () const main = () => {
// rangeMap :: (Num, Num) -> (Num, Num) -> Num -> Num const rangeMap = (a, b) => s => { const [a1, a2] = a; const [b1, b2] = b; // Scaling up an order, and then down, to bypass a potential, // precision issue with negative numbers. return (((((b2 - b1) * (s - a1)) / (a2 - a1)) * 10) + (10 * b1)) / 10; };
const mapping = rangeMap([0, 10], [-1, 0]), xs = enumFromTo(0, 10), ys = map(mapping, xs), zs = map(approxRatio(), ys);
const formatted = (x, m, r) => { const fract = showRatio(r), [n, d] = splitOn('/', fract); return justifyRight(2, ' ', x.toString()) + ' -> ' + justifyRight(4, ' ', m.toString()) + ' = ' + justifyRight(2, ' ', n.toString()) + '/' + d.toString(); };
console.log( unlines(zipWith3(formatted, xs, ys, zs)) ); };
// GENERIC FUNCTIONS ----------------------------
// abs :: Num -> Num const abs = Math.abs;
// Epsilon - > Real - > Ratio // approxRatio :: Real -> Real -> Ratio const approxRatio = eps => n => { const gcde = (e, x, y) => { const _gcd = (a, b) => (b < e ? a : _gcd(b, a % b)); return _gcd(abs(x), abs(y)); }, c = gcde(Boolean(eps) ? eps : (1 / 10000), 1, abs(n)), r = ratio(quot(abs(n), c), quot(1, c)); return { type: 'Ratio', n: r.n * signum(n), d: r.d }; };
// enumFromTo :: Int -> Int -> [Int] const enumFromTo = (m, n) => Array.from({ length: 1 + n - m }, (_, i) => m + i)
// gcd :: Int -> Int -> Int const gcd = (x, y) => { const _gcd = (a, b) => (0 === b ? a : _gcd(b, a % b)), abs = Math.abs; return _gcd(abs(x), abs(y)); };
// justifyRight :: Int -> Char -> String -> String const justifyRight = (n, cFiller, s) => n > s.length ? ( s.padStart(n, cFiller) ) : s;
// Returns Infinity over objects without finite length // this enables zip and zipWith to choose the shorter // argument when one is non-finite, like cycle, repeat etc
// length :: [a] -> Int const length = xs => Array.isArray(xs) ? xs.length : Infinity;
// map :: (a -> b) -> [a] -> [b] const map = (f, xs) => xs.map(f);
// quot :: Int -> Int -> Int const quot = (n, m) => Math.floor(n / m);
// ratio :: Int -> Int -> Ratio Int const ratio = (x, y) => { const go = (x, y) => 0 !== y ? (() => { const d = gcd(x, y); return { type: 'Ratio', 'n': quot(x, d), // numerator 'd': quot(y, d) // denominator }; })() : undefined; return go(x * signum(y), abs(y)); };
// showRatio :: Ratio -> String const showRatio = nd => nd.n.toString() + '/' + nd.d.toString();
// signum :: Num -> Num const signum = n => 0 > n ? -1 : (0 < n ? 1 : 0);
// splitOn :: String -> String -> [String] const splitOn = (pat, src) => src.split(pat);
// unlines :: [String] -> String const unlines = xs => xs.join('\n');
// zipWith3 :: (a -> b -> c -> d) -> [a] -> [b] -> [c] -> [d] const zipWith3 = (f, xs, ys, zs) => Array.from({ length: Math.min(length(xs), length(ys), length(zs)) }, (_, i) => f(xs[i], ys[i], zs[i]));
// MAIN --- return main();
})();</lang>
- Output:
0 -> -1 = -1/1 1 -> -0.9 = -9/10 2 -> -0.8 = -4/5 3 -> -0.7 = -7/10 4 -> -0.6 = -3/5 5 -> -0.5 = -1/2 6 -> -0.4 = -2/5 7 -> -0.3 = -3/10 8 -> -0.2 = -1/5 9 -> -0.1 = -1/10 10 -> 0 = 0/1
jq
In jq, it is generally preferable to define functions as parameterized filters. In the present case, since the task calls for defining a map, the signature maprange(a;b), where a and b are the two ranges, is appropriate. <lang jq># The input is the value to be mapped.
- The ranges, a and b, should each be an array defining the
- left-most and right-most points of the range.
def maprange(a; b):
b[0] + (((. - a[0]) * (b[1] - b[0])) / (a[1] - a[0])) ;</lang>
Example 1: a single value
6 | maprange([0,10]; [-1, 0])
produces:
-0.4
Example 2: a stream of values <lang jq>range(0;11) | maprange([0,10]; [-1, 0])</lang> produces:
-1 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.30000000000000004 -0.19999999999999996 -0.09999999999999998 0
Extra credit
To avoid repeating the same arithmetic, we shall define a filter that handles an array of values all at once, using an inner function and map/1: <lang jq>def maprange_array(a; b):
def _helper(a0; b0; factor): b0 + (. - a0) * factor;
a[0] as $a | b[0] as $b | ((b[1] - b[0]) / (a[1] - a[0])) as $factor | map(_helper( $a; $b; $factor) );</lang>
Example:
[range(0;11)] | maprange_array([0,10]; [-1, 0])
Julia
<lang julia>function maprange(s, a, b)
a₁, a₂ = minimum(a), maximum(a) b₁, b₂ = minimum(b), maximum(b) return b₁ + (s - a₁) * (b₂ - b₁) / (a₂ - a₁)
end
@show maprange(6, 1:10, -1:0) @show maprange(0:10, 0:10, -1:0)</lang>
- Output:
maprange(6, 1:10, -1:0) = -0.4444444444444444 maprange(0:10, 0:10, -1:0) = -1.0:0.1:0.0
K
<lang K> f:{[a1;a2;b1;b2;s] b1+(s-a1)*(b2-b1)%(a2-a1)}
+(a; f[0;10;-1;0]'a:!11)
((0;-1.0)
(1;-0.9) (2;-0.8) (3;-0.7) (4;-0.6) (5;-0.5) (6;-0.4) (7;-0.3) (8;-0.2) (9;-0.1) (10;0.0))</lang>
Kotlin
<lang scala>// version 1.0.6
class FloatRange(override val start: Float, override val endInclusive: Float) : ClosedRange<Float>
fun mapRange(range1: FloatRange, range2: FloatRange, value: Float): Float {
if (value !in range1) throw IllegalArgumentException("value is not within the first range") if (range1.endInclusive == range1.start) throw IllegalArgumentException("first range cannot be single-valued") return range2.start + (value - range1.start) * (range2.endInclusive - range2.start) / (range1.endInclusive - range1.start)
}
fun main(args: Array<String>) {
for (i in 0..10) { val mappedValue = mapRange(FloatRange(0.0f, 10.0f), FloatRange(-1.0f, 0.0f), i.toFloat()) println(String.format("%2d maps to %+4.2f", i, mappedValue)) }
}</lang>
- Output:
0 maps to -1.00 1 maps to -0.90 2 maps to -0.80 3 maps to -0.70 4 maps to -0.60 5 maps to -0.50 6 maps to -0.40 7 maps to -0.30 8 maps to -0.20 9 maps to -0.10 10 maps to +0.00
Lasso
<lang Lasso>define map_range( a1, a2, b1, b2, number ) => (decimal(#b1) + (decimal(#number) - decimal(#a1)) * (decimal(#b2) - decimal(#b1)) / (decimal(#a2) - decimal(#a1))) -> asstring(-Precision = 1)
with number in generateSeries(1,10) do {^
#number
': '
map_range( 0, 10, -1, 0, #number)
'
'
^}'</lang>
- Output:
0: -1.0 1: -0.9 2: -0.8 3: -0.7 4: -0.6 5: -0.5 6: -0.4 7: -0.3 8: -0.2 9: -0.1 10: 0.0
Logo
<lang logo>to interpolate :s :a1 :a2 :b1 :b2
output (:s-:a1) / (:a2-:a1) * (:b2-:b1) + :b1
end
for [i 0 10] [print interpolate :i 0 10 -1 0]</lang>
Lua
<lang lua>function map_range( a1, a2, b1, b2, s )
return b1 + (s-a1)*(b2-b1)/(a2-a1)
end
for i = 0, 10 do
print( string.format( "f(%d) = %f", i, map_range( 0, 10, -1, 0, i ) ) )
end</lang>
Maple
<lang Maple> Map:=proc(a1,a2,b1,b2,s); return (b1+((s-a1)*(b2-b1)/(a2-a1))); end proc;
for i from 0 to 10 do printf("%a maps to ",i); printf("%a\n",Map(0,10,-1,0,i)); end do; </lang>
Mathematica
Such a function is already built in <lang Mathematica> Rescale[#,{0,10},{-1,0}]&/@Range[0,10] </lang>
- Output:
{-1., -0.9, -0.8, -0.7, -0.6, -0.5, -0.4, -0.3, -0.2, -0.1, 0.}
Maxima
<lang maxima>maprange(a, b, c, d) := buildq([e: ratsimp(('x - a)*(d - c)/(b - a) + c)],
lambda([x], e))$
f: maprange(0, 10, -1, 0);</lang>
Nemerle
<lang Nemerle>using System; using System.Console;
module Maprange {
Maprange(a : double * double, b : double * double, s : double) : double { def (a1, a2) = a; def (b1, b2) = b; b1 + (((s - a1) * (b2 - b1))/(a2 - a1)) } Main() : void { foreach (i in [0 .. 10]) WriteLine("{0, 2:f0} maps to {1:f1}", i, Maprange((0.0, 10.0), (-1.0, 0.0), i)); }
}</lang>
NetRexx
<lang netrexx>/* NetRexx */ options replace format comments java crossref savelog symbols nobinary
A = [ 0.0, 10.0 ] B = [ -1.0, 0.0 ] incr = 1.0
say 'Mapping ['A[0]',' A[1]'] to ['B[0]',' B[1]'] in increments of' incr':' loop sVal = A[0] to A[1] by incr
say ' f('sVal.format(3, 3)') =' mapRange(A, B, sVal).format(4, 3) end sVal
return
method mapRange(a = Rexx[], b = Rexx[], s_) public static
return mapRange(a[0], a[1], b[0], b[1], s_)
method mapRange(a1, a2, b1, b2, s_) public static
t_ = b1 + ((s_ - a1) * (b2 - b1) / (a2 - a1)) return t_
</lang>
- Output:
Mapping [0.0, 10.0] to [-1.0, 0.0] in increments of 1.0: f( 0.000) = -1.000 f( 1.000) = -0.900 f( 2.000) = -0.800 f( 3.000) = -0.700 f( 4.000) = -0.600 f( 5.000) = -0.500 f( 6.000) = -0.400 f( 7.000) = -0.300 f( 8.000) = -0.200 f( 9.000) = -0.100 f( 10.000) = 0.000
Nim
<lang nim>import strutils
type FloatRange = tuple[s,e: float]
proc mapRange(a,b: FloatRange, s): float =
b.s + (s - a.s) * (b.e - b.s) / (a.e - a.s)
for i in 0..10:
let m = mapRange((0.0,10.0), (-1.0, 0.0), float(i)) echo i, " maps to ", formatFloat(m, precision = 0)</lang>
- Output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
Objeck
<lang objeck> bundle Default {
class Range { function : MapRange(a1:Float, a2:Float, b1:Float, b2:Float, s:Float) ~ Float { return b1 + (s-a1)*(b2-b1)/(a2-a1); }
function : Main(args : String[]) ~ Nil { "Mapping [0,10] to [-1,0] at intervals of 1:"->PrintLine(); for(i := 0.0; i <= 10.0; i += 1;) { IO.Console->Print("f(")->Print(i->As(Int))->Print(") = ")->PrintLine(MapRange(0.0, 10.0, -1.0, 0.0, i)); }; } }
} </lang>
- Output:
Mapping [0,10] to [-1,0] at intervals of 1: f(0) = -1 f(1) = -0.9 f(2) = -0.8 f(3) = -0.7 f(4) = -0.6 f(5) = -0.5 f(6) = -0.4 f(7) = -0.3 f(8) = -0.2 f(9) = -0.1 f(10) = 0
OCaml
<lang ocaml>let map_range (a1, a2) (b1, b2) s =
b1 +. ((s -. a1) *. (b2 -. b1) /. (a2 -. a1))
let () =
print_endline "Mapping [0,10] to [-1,0] at intervals of 1:"; for i = 0 to 10 do Printf.printf "f(%d) = %g\n" i (map_range (0.0, 10.0) (-1.0, 0.0) (float i)) done</lang>
- Output:
Mapping [0,10] to [-1,0] at intervals of 1: f(0) = -1 f(1) = -0.9 f(2) = -0.8 f(3) = -0.7 f(4) = -0.6 f(5) = -0.5 f(6) = -0.4 f(7) = -0.3 f(8) = -0.2 f(9) = -0.1 f(10) = 0
If range mapping is used in a heavy computational task we can reduce the number of calculations made using partial application and currying:
<lang ocaml>let map_range (a1, a2) (b1, b2) =
let v = (b2 -. b1) /. (a2 -. a1) in function s -> b1 +. ((s -. a1) *. v)
let () =
print_endline "Mapping [0,10] to [-1,0] at intervals of 1:"; let p = (map_range (0.0, 10.0) (-1.0, 0.0)) in for i = 0 to 10 do Printf.printf "f(%d) = %g\n" i (p (float i)) done</lang>
Oforth
<lang Oforth>: mapRange(p1, p2, s)
s p1 first - p2 second p2 first - * p1 second p1 first - asFloat / p2 first + ;</lang>
- Output:
Interval newFromToStep(0, 10, 0.5) map(#[ mapRange([0, 10], [ -1, 0 ])]) println [-1, -0.95, -0.9, -0.85, -0.8, -0.75, -0.7, -0.65, -0.6, -0.55, -0.5, -0.45, -0.4, -0.35, -0.3, -0.25, -0.2, -0.15, -0.1, -0.05, 0]
PARI/GP
Usage (e.g.): map([1,10],[0,5],8.) <lang parigp>map(r1,r2,x)=r2[1]+(x-r1[1])*(r2[2]-r2[1])/(r1[2]-r1[1])</lang>
Pascal
<lang pascal>Program Map(output);
function MapRange(fromRange, toRange: array of real; value: real): real;
begin MapRange := (value-fromRange[0]) * (toRange[1]-toRange[0]) / (fromRange[1]-fromRange[0]) + toRange[0]; end;
var
i: integer;
begin
for i := 0 to 10 do writeln (i, ' maps to: ', MapRange([0.0, 10.0], [-1.0, 0.0], i):4:2);
end.</lang>
- Output:
:> ./MapRange 0 maps to: -1.00 1 maps to: -0.90 2 maps to: -0.80 3 maps to: -0.70 4 maps to: -0.60 5 maps to: -0.50 6 maps to: -0.40 7 maps to: -0.30 8 maps to: -0.20 9 maps to: -0.10 10 maps to: 0.00
improvement doing many calculations
Tested with freepascal_32 2.6.4 .Pushing all data over the stack takes quite a long time. Precaltulating the scalefactor helps too.
Time relation doing 1E7 calculations
Org/ const / tMr
double : 267/177/107 .. 25/16/10
extended: 363/193/123 .. 30/15/10
Output as above. <lang pascal>Program Map(output);
type
real = double; tRange = Array [0..1] of real; tMapRec = record mrFrom, mrTo : tRange; mrScale : real end;
function InitRange(rfrom,rTo:real):tRange; begin
InitRange[0] :=rfrom; InitRange[1] :=rTo;
end;
function InitMapRec(const fromRange, toRange: tRange):tMapRec; begin
With InitMapRec do Begin mrFrom := fromRange; mrTo := toRange; mrScale := (toRange[1]-toRange[0]) / (fromRange[1]-fromRange[0]); end;
end;
function MapRecRange(const value: real;var MR :tMapRec): real; begin
with MR do MapRecRange := (value-mrFrom[0]) * mrScale + mrTo[0];
end;
function MapRange(const value: real;const fromRange, toRange: tRange): real; begin
MapRange := (value-fromRange[0]) * (toRange[1]-toRange[0]) / (fromRange[1]-fromRange[0]) + toRange[0];
end;
var
value:real; rFrom,rTo : tRange; mr : tMapRec; i: LongInt;
begin
rFrom:= InitRange( 0, 10); rTo := InitRange( -1, 0); mr:= InitMapRec(rFrom,rTo);
for i := 0 to 10 do Begin value := i; writeln (i:4, ' maps to: ', MapRange(value,rFrom, rTo):10:6, MapRecRange(value,mr):10:6); end;
end.</lang>
Perl
<lang Perl>#!/usr/bin/perl -w use strict ;
sub mapValue {
my ( $range1 , $range2 , $number ) = @_ ; return ( $range2->[ 0 ] + (( $number - $range1->[ 0 ] ) * ( $range2->[ 1 ] - $range2->[ 0 ] ) ) / ( $range1->[ -1 ] - $range1->[ 0 ] ) ) ;
} my @numbers = 0..10 ; my @interval = ( -1 , 0 ) ; print "The mapped value for $_ is " . mapValue( \@numbers , \@interval , $_ ) . " !\n" foreach @numbers ; </lang>
- Output:
The mapped value for 0 is -1 ! The mapped value for 1 is -0.9 ! The mapped value for 2 is -0.8 ! The mapped value for 3 is -0.7 ! The mapped value for 4 is -0.6 ! The mapped value for 5 is -0.5 ! The mapped value for 6 is -0.4 ! The mapped value for 7 is -0.3 ! The mapped value for 8 is -0.2 ! The mapped value for 9 is -0.1 ! The mapped value for 10 is 0 !
Perl 6
<lang perl6>sub the_function(Range $a, Range $b, $s) {
my ($a1, $a2) = $a.bounds; my ($b1, $b2) = $b.bounds; return $b1 + (($s-$a1) * ($b2-$b1) / ($a2-$a1));
}
for ^11 -> $x { say "$x maps to {the_function(0..10, -1..0, $x)}" }</lang>
%perl6 map_range.p6 0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
A more idiomatic way would be to return a closure that does the mapping without have to supply the ranges every time: <lang perl6>sub getmapper(Range $a, Range $b) {
my ($a1, $a2) = $a.bounds; my ($b1, $b2) = $b.bounds; return -> $s { $b1 + (($s-$a1) * ($b2-$b1) / ($a2-$a1)) }
}
my &mapper = getmapper(0 .. 10, -1 .. 0); for ^11 -> $x {say "$x maps to &mapper($x)"}</lang>
Phix
<lang Phix>function MapRange(atom s, a1, a2, b1, b2)
return b1+(s-a1)*(b2-b1)/(a2-a1)
end function
for i=0 to 10 by 2 do
printf(1,"%2d : %g\n",{i,MapRange(i,0,10,-1,0)})
end for</lang>
- Output:
0 : -1 2 : -0.8 4 : -0.6 6 : -0.4 8 : -0.2 10 : 0
PicoLisp
<lang PicoLisp>(scl 1)
(de mapRange (Val A1 A2 B1 B2)
(+ B1 (*/ (- Val A1) (- B2 B1) (- A2 A1))) )
(for Val (range 0 10.0 1.0)
(prinl (format (mapRange Val 0 10.0 -1.0 0) *Scl) ) )</lang>
- Output:
-1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0
PL/I
<lang pli> map: procedure options (main); /* 24/11/2011 */
declare (a1, a2, b1, b2) float; declare d fixed decimal (3,1);
do d = 0 to 10 by 0.9, 10; put skip edit ( d, ' maps to ', map(0, 10, -1, 0, d) ) (f(5,1), a, f(10,6)); end;
map: procedure (a1, a2, b1, b2, s) returns (float);
declare (a1, a2, b1, b2, s) float; return (b1 + (s - a1)*(b2 - b1) / (a2 - a1) );
end map; end map; </lang>
- Output:
0.0 maps to -1.000000 0.9 maps to -0.910000 1.8 maps to -0.820000 2.7 maps to -0.730000 3.6 maps to -0.640000 4.5 maps to -0.550000 5.4 maps to -0.460000 6.3 maps to -0.370000 7.2 maps to -0.280000 8.1 maps to -0.190000 9.0 maps to -0.100000 9.9 maps to -0.010000 10.0 maps to 0.000000
PowerShell
<lang PowerShell> function Group-Range {
[CmdletBinding()] [OutputType([PSCustomObject])] Param ( [Parameter(Mandatory=$true, Position=0)] [ValidateCount(2,2)] [double[]] $Range1,
[Parameter(Mandatory=$true, Position=1)] [ValidateCount(2,2)] [double[]] $Range2,
[Parameter(Mandatory=$true, ValueFromPipeline=$true, Position=2)] [double] $Map )
Process { foreach ($number in $Map) { [PSCustomObject]@{ Index = $number Mapping = $Range2[0] + ($number - $Range1[0]) * ($Range2[0] - $Range2[1]) / ($Range1[0] - $Range1[1]) } } }
} </lang> <lang PowerShell> 0..10 | Group-Range (0,10) (-1,0) </lang>
- Output:
Index Mapping ----- ------- 0 -1 1 -0.9 2 -0.8 3 -0.7 4 -0.6 5 -0.5 6 -0.4 7 -0.3 8 -0.2 9 -0.1 10 0
PureBasic
<lang purebasic>Structure RR
a.f b.f
EndStructure
Procedure.f MapRange(*a.RR, *b.RR, s)
Protected.f a1, a2, b1, b2 a1=*a\a: a2=*a\b b1=*b\a: b2=*b\b ProcedureReturn b1 + ((s - a1) * (b2 - b1) / (a2 - a1))
EndProcedure
- - Test the function
If OpenConsole()
Define.RR Range1, Range2 Range1\a=0: Range1\b=10 Range2\a=-1:Range2\b=0 ; For i=0 To 10 PrintN(RSet(Str(i),2)+" maps to "+StrF(MapRange(@Range1, @Range2, i),1)) Next
EndIf</lang>
0 maps to -1.0 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0.0
Python
<lang python>>>> def maprange( a, b, s): (a1, a2), (b1, b2) = a, b return b1 + ((s - a1) * (b2 - b1) / (a2 - a1))
>>> for s in range(11): print("%2g maps to %g" % (s, maprange( (0, 10), (-1, 0), s)))
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1
10 maps to 0</lang>
Because of Pythons strict, dynamic, typing rules for numbers the same function can give answers as fractions: <lang python>>>> from fractions import Fraction >>> for s in range(11): print("%2g maps to %s" % (s, maprange( (0, 10), (-1, 0), Fraction(s))))
0 maps to -1 1 maps to -9/10 2 maps to -4/5 3 maps to -7/10 4 maps to -3/5 5 maps to -1/2 6 maps to -2/5 7 maps to -3/10 8 maps to -1/5 9 maps to -1/10
10 maps to 0 >>> </lang>
Racket
<lang Racket>
- lang racket
(define (make-range-map a1 a2 b1 b2)
;; returns a mapping function, doing computing the differences in ;; advance so it's fast (let ([a (- a2 a1)] [b (- b2 b1)]) (λ(s) (exact->inexact (+ b1 (/ (* (- s a1) b) a))))))
(define map (make-range-map 0 10 -1 0)) (for ([i (in-range 0 11)]) (printf "~a --> ~a\n" i (map i))) </lang>
- Output:
0 --> -1.0 1 --> -0.9 2 --> -0.8 3 --> -0.7 4 --> -0.6 5 --> -0.5 6 --> -0.4 7 --> -0.3 8 --> -0.2 9 --> -0.1 10 --> 0.0
REXX
(The first three REXX versions don't differ idiomatically that much, but differ mostly just in style.)
The first three versions support different increments (the inc variable) and an A range that is decreasing in values
(that is, the 2nd number [usually the high] in the range is less than the first number in the range [usually the low]). Also,
the BY (increment) is automatically adjusted (either upwards or downwards). Also,
both sets of numbers in the
output are aligned (vertically).
version 1
<lang rexx>/*REXX program maps and displays a range of numbers from one range to another range.*/ rangeA = 0 10 /*or: rangeA = ' 0 10 ' */ rangeB = -1 0 /*or: rangeB = " -1 0 " */ parse var rangeA L H inc= 1
do j=L to H by inc * (1 - 2 * sign(H<L) ) /*BY: either +inc or -inc */ say right(j, 9) ' maps to ' mapR(rangeA, rangeB, j) end /*j*/
exit /*stick a fork in it, we're done.*/ /*──────────────────────────────────────────────────────────────────────────────────────*/ mapR: procedure; parse arg a1 a2,b1 b2,s;$=b1+(s-a1)*(b2-b1)/(a2-a1);return left(,$>=0)$</lang>
- output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
version 2
This version demonstrates an increment (inc) of 1/2 instead of the usual unity.
Note that this REXX version also uses a different rangeA numbers (they are reversed). <lang rexx>/*REXX program maps and displays a range of numbers from one range to another range.*/ rangeA = 10 0 /*or: rangeA = ' 0 10 ' */ rangeB = -1 0 /*or: rangeB = " -1 0 " */ parse var rangeA L H inc= 1/2
do j=L to H by inc * (1 - 2 * sign(H<L) ) /*BY: either +inc or -inc */ say right(j, 9) ' maps to ' mapR(rangeA, rangeB, j) end /*j*/
exit /*stick a fork in it, we're done.*/ /*──────────────────────────────────────────────────────────────────────────────────────*/ mapR: procedure; parse arg a1 a2,b1 b2,s;$=b1+(s-a1)*(b2-b1)/(a2-a1);return left(,$>=0)$</lang>
- output:
0 maps to 0 0.5 maps to -0.05 1.0 maps to -0.1 1.5 maps to -0.15 2.0 maps to -0.2 2.5 maps to -0.25 3.0 maps to -0.3 3.5 maps to -0.35 4.0 maps to -0.4 4.5 maps to -0.45 5.0 maps to -0.5 5.5 maps to -0.55 6.0 maps to -0.6 6.5 maps to -0.65 7.0 maps to -0.7 7.5 maps to -0.75 8.0 maps to -0.8 8.5 maps to -0.85 9.0 maps to -0.9 9.5 maps to -0.95 10.0 maps to -1
version 3
This REXX version used a function that calculates and also displays the range mapping. <lang rexx>/*REXX program maps and displays a range of numbers from one range to another range.*/ rangeA = 0 10 rangeB = -1 0 inc = 1 call mapR rangeA, rangeB, inc exit /*stick a fork in it, we're all done. */ /*──────────────────────────────────────────────────────────────────────────────────────*/ mapR: procedure; parse arg a1 a2, b1 b2, inc /* [↓] BY is either +inc or -inc.*/
do s=a1 to a2 by inc * (1 - 2 * sign(a2 < a1) ) t= b1 + (s-a1) * (b2-b1) / (a2-a1) say right(s, 9) ' maps to' left(, t>=0) t end /*s*/ return /* [↑] LEFT··· aligns non─negative #'s*/</lang>
- output is identical to the 1st REXX version.
Version 4
<lang rexx>/*REXX program maps a number from one range to another range. */ /* 31.10.2013 Walter Pachl */ /* 'translated' from an older version 1 without using Procedure */
do j=0 to 10 say right(j,3) ' maps to ' mapRange(0,10,-1,0,j) end
exit /*──────────────────────────────────MAPRANGE subroutine─────────────────*/ mapRange: return arg(3)+(arg(5)-arg(1))*(arg(4)-arg(3))/(arg(2)-arg(1)) /* Arguments are arg a1,a2,b1,b2,x */</lang>
- Output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
Ring
<lang ring>
- Project : Map range
decimals(1) al = 0 ah = 10 bl = -1 bh = 0 for n = 0 to 10
see "" + n + " maps to " + maprange(al, bl, n) + nl
next
func maprange(al, bl, s)
return bl + (s - al) * (bh - bl) / (ah - al)
</lang> Output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
Ruby
<lang ruby>def map_range(a, b, s)
af, al, bf, bl = a.first, a.last, b.first, b.last bf + (s - af)*(bl - bf).quo(al - af)
end
(0..10).each{|s| puts "%s maps to %g" % [s, map_range(0..10, -1..0, s)]}</lang>
Numeric#quo does floating point division.
- Output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
To use rational arithmetic, delete s *= 1.0
and either require 'rational'
, or use Ruby 1.9 (which has Rational in the core library).
<lang ruby>(0..10).each do |s|
puts "%s maps to %s" % [s, map_range(0..10, -1..0, s)]
end</lang>
- Output:
using rational arithmetic
0 maps to -1/1 1 maps to -9/10 2 maps to -4/5 3 maps to -7/10 4 maps to -3/5 5 maps to -1/2 6 maps to -2/5 7 maps to -3/10 8 maps to -1/5 9 maps to -1/10 10 maps to 0/1
Rust
<lang rust>use std::f64;
fn map_range(from_range: (f64, f64), to_range: (f64, f64), s: f64) -> f64 {
to_range.0 + (s - from_range.0) * (to_range.1 - to_range.0) / (from_range.1 - from_range.0)
}
fn main() {
let input: Vec<f64> = vec![0.0, 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0]; let result = input.into_iter() .map(|x| map_range((0.0, 10.0), (-1.0, 0.0), x)) .collect::<Vec<f64>>(); print!("{:?}", result);
}</lang>
- Output:
[-1, -0.9, -0.8, -0.7, -0.6, -0.5, -0.4, -0.30000000000000004, -0.19999999999999996, -0.09999999999999998, 0]
Scala
<lang scala>def mapRange(a1:Double, a2:Double, b1:Double, b2:Double, x:Double):Double=b1+(x-a1)*(b2-b1)/(a2-a1)
for(i <- 0 to 10)
println("%2d in [0, 10] maps to %5.2f in [-1, 0]".format(i, mapRange(0,10, -1,0, i)))</lang>
- Output:
0 in [0, 10] maps to -1,00 in [-1, 0] 1 in [0, 10] maps to -0,90 in [-1, 0] 2 in [0, 10] maps to -0,80 in [-1, 0] 3 in [0, 10] maps to -0,70 in [-1, 0] 4 in [0, 10] maps to -0,60 in [-1, 0] 5 in [0, 10] maps to -0,50 in [-1, 0] 6 in [0, 10] maps to -0,40 in [-1, 0] 7 in [0, 10] maps to -0,30 in [-1, 0] 8 in [0, 10] maps to -0,20 in [-1, 0] 9 in [0, 10] maps to -0,10 in [-1, 0] 10 in [0, 10] maps to 0,00 in [-1, 0]
Seed7
<lang seed7>$ include "seed7_05.s7i";
include "float.s7i";
const func float: mapRange (in float: a1, in float: a2, in float: b1, in float: b2, ref float: s) is
return b1 + (s-a1)*(b2-b1)/(a2-a1);
const proc: main is func
local var integer: number is 0; begin writeln("Mapping [0,10] to [-1,0] at intervals of 1:"); for number range 0 to 10 do writeln("f(" <& number <& ") = " <& mapRange(0.0, 10.0, -1.0, 0.0, flt(number)) digits 1); end for; end func;</lang>
- Output:
Mapping [0,10] to [-1,0] at intervals of 1: f(0) = -1.0 f(1) = -0.9 f(2) = -0.8 f(3) = -0.7 f(4) = -0.6 f(5) = -0.5 f(6) = -0.4 f(7) = -0.3 f(8) = -0.2 f(9) = -0.1 f(10) = 0.0
Sidef
<lang ruby>func map_range(a, b, x) {
var (a1, a2, b1, b2) = (a.bounds, b.bounds); x-a1 * b2-b1 / a2-a1 + b1;
}
var a = 0..10; var b = -1..0;
for x in a {
say "#{x} maps to #{map_range(a, b, x)}";
}</lang>
- Output:
0 maps to -1 1 maps to -0.9 2 maps to -0.8 3 maps to -0.7 4 maps to -0.6 5 maps to -0.5 6 maps to -0.4 7 maps to -0.3 8 maps to -0.2 9 maps to -0.1 10 maps to 0
Stata
The following program will map a variable to a new variable. It accepts if and in conditions.
<lang stata>program define maprange version 15.1 syntax varname(numeric) [if] [in], /// from(numlist min=2 max=2) to(numlist min=2 max=2) /// GENerate(name) [REPLACE] tempname a b c d h sca `a'=`:word 1 of `from sca `b'=`:word 2 of `from sca `c'=`:word 1 of `to sca `d'=`:word 2 of `to sca `h'=(`d'-`c')/(`b'-`a') cap confirm variable `generate' if "`replace'"=="replace" & !_rc { qui replace `generate'=(`varlist'-`a')*`h'+`c' `if' `in' } else { if "`replace'"=="replace" { di in gr `"(note: variable `generate' not found)"' } qui gen `generate'=(`varlist'-`a')*`h'+`c' `if' `in' } end</lang>
Example
<lang stata>clear set obs 11 gen x=_n-1 maprange x if mod(x,2)==0, gen(y) from(0 10) to(-10 10) maprange x if mod(x,2)!=0, gen(y) from(0 10) to(-100 100) replace list</lang>
Output
+----------+ | x y | |----------| 1. | 0 -10 | 2. | 1 -80 | 3. | 2 -6 | 4. | 3 -40 | 5. | 4 -2 | |----------| 6. | 5 0 | 7. | 6 2 | 8. | 7 40 | 9. | 8 6 | 10. | 9 80 | |----------| 11. | 10 10 | +----------+
Swift
<lang Swift>import Foundation
func mapRanges(_ r1: ClosedRange<Double>, _ r2: ClosedRange<Double>, to: Double) -> Double {
let num = (to - r1.lowerBound) * (r2.upperBound - r2.lowerBound) let denom = r1.upperBound - r1.lowerBound return r2.lowerBound + num / denom
}
for i in 0...10 {
print(String(format: "%2d maps to %5.2f", i, mapRanges(0...10, -1...0, to: Double(i))))
}</lang>
- Output:
0 maps to -1.00 1 maps to -0.90 2 maps to -0.80 3 maps to -0.70 4 maps to -0.60 5 maps to -0.50 6 maps to -0.40 7 maps to -0.30 8 maps to -0.20 9 maps to -0.10 10 maps to 0.00
Tcl
<lang tcl>package require Tcl 8.5 proc rangemap {rangeA rangeB value} {
lassign $rangeA a1 a2 lassign $rangeB b1 b2 expr {$b1 + ($value - $a1)*double($b2 - $b1)/($a2 - $a1)}
}</lang> Demonstration (using a curried alias to bind the ranges mapped from and to): <lang tcl>interp alias {} demomap {} rangemap {0 10} {-1 0} for {set i 0} {$i <= 10} {incr i} {
puts [format "%2d -> %5.2f" $i [demomap $i]]
}</lang>
- Output:
0 -> -1.00 1 -> -0.90 2 -> -0.80 3 -> -0.70 4 -> -0.60 5 -> -0.50 6 -> -0.40 7 -> -0.30 8 -> -0.20 9 -> -0.10 10 -> 0.00
Ursala
The function f
is defined using pattern matching and substitution, taking a pair of pairs of interval endpoints and a number as parameters, and returning a number.
<lang Ursala>#import flo
f((("a1","a2"),("b1","b2")),"s") = plus("b1",div(minus("s","a1"),minus("a2","a1")))
- cast %eL
test = f* ((0.,10.),(-1.,0.))-* ari11/0. 10.</lang>
- Output:
< -1.000000e+00, -9.000000e-01, -8.000000e-01, -7.000000e-01, -6.000000e-01, -5.000000e-01, -4.000000e-01, -3.000000e-01, -2.000000e-01, -1.000000e-01, 0.000000e+00>
A more idiomatic way is to define f as a second order function <lang Ursala>f(("a1","a2"),("b1","b2")) "s" = ...</lang> with the same right hand side as above, so that it takes a pair of intervals and returns a function mapping numbers in one interval to numbers in the other.
An even more idiomatic way is to use the standard library function plin
, which takes an arbitrarily long list of interval endpoints and returns a piecewise linear interpolation function.
Vala
<lang vala>double map_range(double[] a, double[] b, double s) {
return b[0] + ((s - a[0]) * (b[1] - b[0]) / (a[1] - a[0]));
}
void main() {
const double[] r1 = {0.0, 10.0}; const double[] r2 = {-1.0, 0.0}; for (int s = 0; s < 11; s++) print("%2d maps to %5.2f\n", s, map_range(r1, r2, (double)s));
}</lang>
- Output:
0 maps to -1.00 1 maps to -0.90 2 maps to -0.80 3 maps to -0.70 4 maps to -0.60 5 maps to -0.50 6 maps to -0.40 7 maps to -0.30 8 maps to -0.20 9 maps to -0.10 10 maps to 0.00
WDTE
<lang WDTE>let mapRange r1 r2 s =>
+ (at r2 0) (/ (* (- s (at r1 0) ) (- (at r2 1) (at r2 0) ) ) (- (at r1 1) (at r1 0) ) ) ;
let s => import 'stream'; let str => import 'strings';
s.range 10 -> s.map (@ enum v => [v; mapRange [0; 10] [-1; 0] v]) -> s.map (@ print v => str.format '{} -> {}' (at v 0) (at v 1) -- io.writeln io.stdout) -> s.drain
- </lang>
- Output:
0 -> -1 1 -> -0.9 2 -> -0.8 3 -> -0.7 4 -> -0.6 5 -> -0.5 6 -> -0.4 7 -> -0.3 8 -> -0.2 9 -> -0.1
XPL0
<lang XPL0>include c:\cxpl\codes;
func real Map(A1, A2, B1, B2, S); real A1, A2, B1, B2, S; return B1 + (S-A1)*(B2-B1)/(A2-A1);
int I; [for I:= 0 to 10 do
[if I<10 then ChOut(0, ^ ); IntOut(0, I); RlOut(0, Map(0., 10., -1., 0., float(I))); CrLf(0); ];
]</lang>
- Output:
0 -1.00000 1 -0.90000 2 -0.80000 3 -0.70000 4 -0.60000 5 -0.50000 6 -0.40000 7 -0.30000 8 -0.20000 9 -0.10000 10 0.00000
Yabasic
<lang Yabasic>sub MapRange(s, a1, a2, b1, b2)
return b1+(s-a1)*(b2-b1)/(a2-a1)
end sub
for i = 0 to 10 step 2
print i, " : ", MapRange(i,0,10,-1,0)
next</lang>
zkl
<lang zkl>fcn mapRange([(a1,a2)], [(b1,b2)], s) // a1a2 is List(a1,a2)
{ b1 + ((s - a1) * (b2 - b1) / (a2 - a1)) }
r1:=T(0.0, 10.0); r2:=T(-1.0, 0.0); foreach s in ([0.0 .. 10]){
"%2d maps to %5.2f".fmt(s,mapRange(r1,r2, s)).println();
}</lang>
- Output:
0 maps to -1.00 1 maps to -0.90 2 maps to -0.80 3 maps to -0.70 4 maps to -0.60 5 maps to -0.50 6 maps to -0.40 7 maps to -0.30 8 maps to -0.20 9 maps to -0.10 10 maps to 0.00
- Programming Tasks
- Solutions by Programming Task
- ACL2
- Ada
- ALGOL 68
- AppleScript
- AutoHotkey
- Axiom
- AWK
- BASIC
- BBC BASIC
- Commodore BASIC
- IS-BASIC
- Bc
- Bracmat
- C
- C sharp
- C++
- Clojure
- COBOL
- CoffeeScript
- Common Lisp
- D
- EchoLisp
- Elixir
- Emacs Lisp
- Erlang
- ERRE
- Euphoria
- Factor
- Fantom
- Forth
- Fortran
- Go
- Groovy
- Haskell
- Icon
- Unicon
- J
- Java
- JavaScript
- Underscore.js
- Jq
- Julia
- K
- Kotlin
- Lasso
- Logo
- Lua
- Maple
- Mathematica
- Maxima
- Nemerle
- NetRexx
- Nim
- Objeck
- OCaml
- Oforth
- PARI/GP
- Pascal
- Perl
- Perl 6
- Phix
- PicoLisp
- PL/I
- PowerShell
- PureBasic
- Python
- Racket
- REXX
- Ring
- Ruby
- Rust
- Scala
- Seed7
- Sidef
- Stata
- Swift
- Tcl
- Ursala
- Vala
- WDTE
- XPL0
- Yabasic
- Zkl