Möbius function: Difference between revisions
m Made Version 1 runnable under ooRexx, added timings, added some runs. |
|||
(6 intermediate revisions by the same user not shown) | |||
Line 2,268: | Line 2,268: | ||
{{out|output}} |
{{out|output}} |
||
Output note: note the use of a |
Output note: note the use of a asterisk (*) to signify that a "null" is being shown (for the 0<sup>th</sup> entry).<br> |
||
First run (Regina, no parameters) |
First run (Regina, no parameters) |
||
<pre> |
<pre> |
||
Line 2,282: | Line 2,282: | ||
0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 |
0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 |
||
0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1 |
0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1 |
||
0. |
0.001 seconds |
||
</pre> |
</pre> |
||
Second run (Regina, parameters 100000 100199) |
Second run (Regina, parameters 100000 100199) |
||
Line 2,297: | Line 2,297: | ||
0 0 -1 -1 0 1 1 -1 0 -1 0 1 0 1 1 0 0 -1 -1 0 |
0 0 -1 -1 0 1 1 -1 0 -1 0 1 0 1 1 0 0 -1 -1 0 |
||
0 -1 1 -1 0 -1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 1 |
0 -1 1 -1 0 -1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 1 |
||
1. |
1.145 seconds |
||
</pre> |
</pre> |
||
Third run (Regina, parameters 1000000 1000199) |
Third run (Regina, parameters 1000000 1000199) |
||
Line 2,312: | Line 2,312: | ||
0 0 -1 -1 0 1 1 1 0 1 0 -1 0 -1 1 0 0 1 1 0 |
0 0 -1 -1 0 1 1 1 0 1 0 -1 0 -1 1 0 0 1 1 0 |
||
0 1 1 -1 0 1 0 -1 0 1 -1 1 0 -1 1 0 0 0 -1 -1 |
0 1 1 -1 0 1 0 -1 0 1 -1 1 0 -1 1 0 0 0 -1 -1 |
||
32.700 seconds |
|||
</pre> |
</pre> |
||
===Version 2=== |
===Version 2=== |
||
'''Libraries:''' [[Mathematics.hel|How to use]]<br> |
|||
Under construction. |
|||
'''Library:''' [[Mathematics.rex#Numbers|Numbers]]<br> |
|||
'''Library:''' [[Mathematics.rex#Functions|Functions]]<br> |
|||
Scrolling thru the various solutions of this task, I see 2 main approaches. First, a customized and optimized solution, often containing some code that is also used in prime factorization. Second, a solution taking advantage of the presence of fancy (Bignum) fast libraries with function as Factors, IsPrime etc.<br> |
|||
REXX does not have any useful libraries for the task. So I created my own (see above). I wanted to show here that even in REXX a neat structured way of programming is possible. |
|||
Let's go back to the definition of the Moebius function: |
|||
μ(1) is defined to be 1.<br> |
|||
μ(n) = 1 if n is a square-free positive integer with an even number of prime factors.<br> |
|||
μ(n) = −1 if n is a square-free positive integer with an odd number of prime factors.<br> |
|||
μ(n) = 0 if n has a squared prime factor. |
|||
So what do we need? A procedure delivering the number of prime factors and the number of unique prime factors. If these 2 numbers are equal, than n is square-free otherwise not. Consider following program: |
|||
<syntaxhighlight lang="rexx"> |
|||
/*REXX pgm computes & shows a value grid of the Möbius function for a range of integers.*/ |
|||
call time('r') |
|||
parse arg LO HI grp . /*obtain optional arguments from the CL*/ |
|||
numeric digits 100 |
|||
if LO=='' | LO=="," then LO= 0 /*Not specified? Then use the default.*/ |
|||
if HI=='' | HI=="," then HI= 199 /* " " " " " " */ |
|||
if grp=='' | grp=="," then grp= 20 /* " " " " " " */ |
|||
/* ______ */ |
|||
say center(' The Moebius sequence from ' LO " --> " HI" ", max(50, grp*3), '=') /*title*/ |
|||
dd='' /*variable holds output grid of GRP #s.*/ |
|||
do j=LO to HI; dd= dd right( moebius(j), 2) /*process some numbers from LO --> HI.*/ |
|||
if words(dd)==grp then do; say substr(dd, 2); dd='' /*show grid if fully populated,*/ |
|||
end /* and nullify it for more #s.*/ |
|||
end /*j*/ /*for small grids, using wordCnt is OK.*/ |
|||
if dd\=='' then say substr(dd, 2) /*handle any residual numbers not shown*/ |
|||
say format(time('e'),,3) 'seconds' |
|||
exit /*stick a fork in it, we're all done. */ |
|||
Moebius: |
|||
-- Moebius sequence |
|||
procedure expose glob. |
|||
arg x |
|||
-- Validity |
|||
if \ Whole(x) then |
|||
return 'X' |
|||
if x < 0 then |
|||
return 'X' |
|||
-- Special value |
|||
if x = 0 then |
|||
return '*' |
|||
-- Using # of (unique) prime factors |
|||
call Factors(x) |
|||
call Ufactors(x) |
|||
if glob.factor.0 = glob.ufactor.0 then |
|||
if even(glob.factor.0) then |
|||
return 1 |
|||
else |
|||
return -1 |
|||
else |
|||
return 0 |
|||
include Functions |
|||
include Numbers |
|||
</syntaxhighlight> |
|||
The task is solved in the small procedure Moebius. But this procedure needs a little more... check library Numbers. |
|||
It seems there's a LOT of overhead in this program:<br> |
|||
Procedure (U)Factors not only counts (unique) factors, but also delivers then.<br> |
|||
It performs a primality check to avoid attempts to factorize a prime number.<br> |
|||
The primality test (Miller-Rabin) needs a random generator (Rand) and modular exponentiation (Powermod).<br> |
|||
And there are 2 minor procedures: integer check (Whole) en even number check (Even)... |
|||
Why use such an approach? Well, I like to have standard components 'building blocks', useable in different contexts. And I take the overhead for granted, because it saves a lot of coding effort and duplicate code. |
|||
{{out}} |
|||
Now let's check the correctness and performance of Version 2.<br> |
|||
Run 1 (Regina no parameters) |
|||
<pre> |
|||
========== The Moebius sequence from 0 --> 199 ========== |
|||
* 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 |
|||
0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 |
|||
0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 |
|||
0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 |
|||
0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 |
|||
0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 |
|||
0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 |
|||
0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 |
|||
0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 |
|||
0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1 |
|||
0.003 seconds |
|||
</pre> |
|||
Run 2 (Regina, parameters 100000 100199) |
|||
<pre> |
|||
====== The Moebius sequence from 100000 --> 100199 ====== |
|||
0 1 1 -1 0 1 -1 1 0 0 1 1 0 1 1 -1 0 0 -1 -1 |
|||
0 1 -1 1 0 0 0 1 0 1 1 1 0 1 -1 0 0 -1 -1 1 |
|||
0 1 1 -1 0 1 1 1 0 -1 0 1 0 0 -1 1 0 -1 0 1 |
|||
0 -1 0 1 0 1 1 0 0 -1 -1 0 0 -1 1 0 0 1 -1 0 |
|||
0 1 -1 -1 0 -1 1 1 0 0 -1 1 0 -1 1 -1 0 1 0 1 |
|||
0 -1 1 -1 0 1 1 0 0 -1 -1 -1 0 1 -1 1 0 1 -1 -1 |
|||
0 1 -1 1 0 0 -1 1 0 -1 -1 1 0 1 0 -1 0 -1 1 1 |
|||
0 1 1 0 0 1 -1 -1 0 1 0 -1 0 -1 1 1 0 1 -1 1 |
|||
0 0 -1 -1 0 1 1 -1 0 -1 0 1 0 1 1 0 0 -1 -1 0 |
|||
0 -1 1 -1 0 -1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 1 |
|||
0.006 seconds |
|||
</pre> |
|||
Run 3 (Regina, parameters 1000000 1000199) |
|||
<pre> |
|||
===== The Moebius sequence from 1000000 --> 1000199 ===== |
|||
0 1 -1 -1 0 1 -1 1 0 1 1 1 0 -1 -1 1 0 0 1 1 |
|||
0 1 -1 1 0 0 0 1 0 -1 -1 1 0 -1 1 0 0 -1 1 -1 |
|||
0 0 1 -1 0 1 -1 1 0 1 0 -1 0 0 1 -1 0 1 1 -1 |
|||
0 1 0 1 0 0 -1 1 0 1 1 0 0 -1 -1 0 0 -1 -1 1 |
|||
0 -1 1 -1 0 1 1 1 0 0 0 1 0 -1 1 1 0 1 0 -1 |
|||
0 1 -1 -1 0 -1 -1 0 0 1 1 1 0 1 1 1 0 -1 -1 -1 |
|||
0 -1 -1 1 0 0 -1 1 0 -1 1 -1 0 -1 0 -1 0 -1 1 0 |
|||
0 1 0 0 0 1 1 1 0 1 0 -1 0 1 -1 -1 0 1 -1 -1 |
|||
0 0 -1 -1 0 1 1 1 0 1 0 -1 0 -1 1 0 0 1 1 0 |
|||
0 1 1 -1 0 1 0 -1 0 1 -1 1 0 -1 1 0 0 0 -1 -1 |
|||
0.014 seconds |
|||
</pre> |
|||
Run 4 (Regina, parameters 1000000000000 1000000000199) |
|||
<pre> |
|||
The Moebius sequence from 1000000000000 --> 1000000000199 |
|||
0 -1 -1 -1 0 -1 1 1 0 -1 0 1 0 1 -1 1 0 0 -1 -1 |
|||
0 1 1 1 0 0 0 -1 0 -1 -1 -1 0 1 0 0 0 1 1 -1 |
|||
0 1 -1 1 0 1 1 -1 0 1 0 -1 0 0 -1 1 0 1 1 1 |
|||
0 -1 0 -1 0 1 1 -1 0 -1 1 0 0 1 -1 0 0 -1 -1 1 |
|||
0 1 1 0 0 -1 -1 -1 0 0 -1 -1 0 1 -1 -1 0 1 0 -1 |
|||
0 1 1 -1 0 1 -1 0 0 1 0 1 0 -1 -1 1 0 1 1 -1 |
|||
0 -1 1 1 0 0 -1 1 0 -1 1 0 0 1 0 -1 0 1 -1 -1 |
|||
0 1 -1 0 0 1 -1 1 0 1 0 -1 0 -1 1 1 0 0 -1 1 |
|||
0 0 -1 -1 0 -1 1 1 0 -1 0 1 0 -1 1 0 0 -1 1 0 |
|||
0 0 -1 0 0 1 1 -1 0 -1 -1 -1 0 -1 1 1 0 0 -1 1 |
|||
4.519 seconds |
|||
</pre> |
|||
For small Moebius numbers, Version 1 outperforms Version 2, but for bigger number the latter is much, MUCH faster. |
|||
=={{header|Ring}}== |
=={{header|Ring}}== |
Latest revision as of 08:06, 20 August 2024
![Task](http://static.miraheze.org/rosettacodewiki/thumb/b/ba/Rcode-button-task-crushed.png/64px-Rcode-button-task-crushed.png)
You are encouraged to solve this task according to the task description, using any language you may know.
The classical Möbius function: μ(n) is an important multiplicative function in number theory and combinatorics.
There are several ways to implement a Möbius function.
A fairly straightforward method is to find the prime factors of a positive integer n, then define μ(n) based on the sum of the primitive factors. It has the values {−1, 0, 1} depending on the factorization of n:
- μ(1) is defined to be 1.
- μ(n) = 1 if n is a square-free positive integer with an even number of prime factors.
- μ(n) = −1 if n is a square-free positive integer with an odd number of prime factors.
- μ(n) = 0 if n has a squared prime factor.
- Task
-
- Write a routine (function, procedure, whatever) μ(n) to find the Möbius number for a positive integer n.
- Use that routine to find and display here, on this page, at least the first 99 terms in a grid layout. (Not just one long line or column of numbers.)
- See also
- Related Tasks
11l
F isPrime(n)
I n < 2
R 0B
L(i) 2 .. n
I i * i <= n & n % i == 0
R 0B
R 1B
F mobius(n)
I n == 1
R 1
V p = 0
L(i) 1 .. n
I n % i == 0 & isPrime(i)
I n % (i * i) == 0
R 0
E
p = p + 1
I p % 2 != 0
R -1
E
R 1
print(‘Mobius numbers from 1..99:’)
L(i) 1..99
print(f:‘{mobius(i):4}’, end' ‘’)
I i % 20 == 0
print()
- Output:
Mobius numbers from 1..99: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0
ALGOL 68
BEGIN
# show the first 199 values of the moebius function #
INT sq root = 1 000;
INT mu max = sq root * sq root;
[ 1 : mu max ]INT mu;
FOR i FROM LWB mu TO UPB mu DO mu[ i ] := 1 OD;
FOR i FROM 2 TO sq root DO
IF mu[ i ] = 1 THEN
# for each factor found, swap + and - #
FOR j FROM i BY i TO UPB mu DO mu[ j ] *:= -i OD;
FOR j FROM i * i BY i * i TO UPB mu DO mu[ j ] := 0 OD
FI
OD;
FOR i FROM 2 TO UPB mu DO
IF mu[ i ] = i THEN mu[ i ] := 1
ELIF mu[ i ] = -i THEN mu[ i ] := -1
ELIF mu[ i ] < 0 THEN mu[ i ] := 1
ELIF mu[ i ] > 0 THEN mu[ i ] := -1
# ELSE mu[ i ] = 0 so no change #
FI
OD;
print( ( "First 199 terms of the möbius function are as follows:", newline, " " ) );
FOR i TO 199 DO
print( ( whole( mu[ i ], -4 ) ) );
IF ( i + 1 ) MOD 20 = 0 THEN print( ( newline ) ) FI
OD
END
- Output:
First 199 terms of the möbius function are as follows: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Amazing Hopper
#include <basico.h>
#proto cálculodeMobius(_X_)
#synon _cálculodeMobius calcularMobius
algoritmo
imprimir ("Mobius numbers from 1..199\n")
i=0, s=1
iterar grupo( ++i, #(i<=199), calcular Mobius (i), \
solo si (#( iszero(s%20) ), NL;s=0 ), imprimir, ++s )
saltar
terminar
subrutinas
cálculo de Mobius (n)
si( #(n==0) ) ; tomar '" "'
sino si( #(n==1) ); tomar '" 1"'
sino; p=0
iterar para (i=1, #(i<=n+1), ++i)
si ( #( iszero(n%i) && isprime(i)) )
cuando ( #( iszero(n%(i*i)) ) ){
tomar '" 0"'; ir a (herejía) /* ¡! */
} ++p
fin si
siguiente
tomar si ( es impar(p), " -1", " 1" )
fin si
/* ¡Dios! ¡Purifica esta mierda! ----+ */
/* | */
herejía: /* <----------------------+ */
retornar
- Output:
Mobius numbers from 1..199 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Arturo
mobius: function [n][
if n=0 -> return ""
if n=1 -> return 1
f: factors.prime n
if f <> unique f -> return 0
if? odd? size f -> return neg 1
else -> return 1
]
loop split.every:20 map 0..199 => mobius 'a ->
print map a => [pad to :string & 3]
- Output:
1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
AutoHotkey
loop 100
result .= SubStr(" " Möbius(A_Index), -1) . (Mod(A_Index, 10) ? " " : "`n")
MsgBox, 262144, , % result
return
Möbius(n){
if n=1
return 1
x := prime_factors(n)
c := x.Count()
sq := []
for i, v in x
if sq[v]
return 0
else
sq[v] := 1
return (c/2 = floor(c/2)) ? 1 : -1
}
prime_factors(n) {
if (n <= 3)
return [n]
ans := [], done := false
while !done {
if !Mod(n, 2)
ans.push(2), n /= 2
else if !Mod(n, 3)
ans.push(3), n /= 3
else if (n = 1)
return ans
else {
sr := sqrt(n), done := true, i := 6
while (i <= sr+6) {
if !Mod(n, i-1) { ; is n divisible by i-1?
ans.push(i-1), n /= i-1, done := false
break
}
if !Mod(n, i+1) { ; is n divisible by i+1?
ans.push(i+1), n /= i+1, done := false
break
}
i += 6
}}}
ans.push(Format("{:d}", n))
return ans
}
- Output:
1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0
AWK
# syntax: GAWK -f MOBIUS_FUNCTION.AWK
# converted from Java
BEGIN {
printf("first 199 terms of the mobius sequence:\n ")
for (n=1; n<200; n++) {
printf("%3d",mobius(n))
if ((n+1) % 20 == 0) {
printf("\n")
}
}
exit(0)
}
function mobius(n, i,j,mu_max) {
if (n in MU) {
return(MU[n])
}
mu_max = 1000000
for (i=0; i<mu_max; i++) { # populate array
MU[i] = 1
}
for (i=2; i<=int(sqrt(mu_max)); i++ ) {
if (MU[i] == 1) {
for (j=i; j<=mu_max; j+=i) { # for each factor found, swap + and -
MU[j] *= -i
}
for (j=i*i; j<=mu_max; j+=i*i) { # square factor = 0
MU[j] = 0
}
}
}
for (i=2; i<=mu_max; i++) {
if (MU[i] == i) {
MU[i] = 1
}
else if (MU[i] == -i) {
MU[i] = -1
}
else if (MU[i] < 0) {
MU[i] = 1
}
else if (MU[i] > 0) {
MU[i] = -1
}
}
return(MU[n])
}
- Output:
first 199 terms of the mobius sequence: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
BASIC
Applesoft BASIC
10 HOME
20 FOR t = 0 TO 9
30 FOR u = 1 TO 10
40 n = 10*t+u
50 GOSUB 130
60 IF STR$(m) = "0" THEN PRINT " 0";
70 IF STR$(m) = "1" THEN PRINT " 1";
80 IF STR$(m) = "-1" THEN PRINT " -1";
90 NEXT u
100 PRINT
110 NEXT t
120 END
130 IF n = 1 THEN m = 1 : RETURN
140 m = 1 : f = 2
150 IF (n-INT(n/(f*f))*(f*f)) = 0 THEN m = 0 : RETURN
160 IF (n-INT(n/(f))*(f)) = 0 THEN GOSUB 200
170 f = f+1
180 IF f <= n THEN GOTO 150
190 RETURN
200 m = -m
210 n = n/f
220 RETURN
230 END
- Output:
Same as GW-BASIC entry.
BASIC256
function mobius(n)
if n = 1 then return 1
for d = 2 to int(sqr(n))
if n mod d = 0 then
if n mod (d*d) = 0 then return 0
return -mobius(n/d)
end if
next d
return -1
end function
outstr$ = " . "
for i = 1 to 200
if mobius(i) >= 0 then outstr$ += " "
outstr$ += string(mobius(i)) + " "
if i mod 10 = 9 then
print outstr$
outstr$ = ""
end if
next i
end
- Output:
Igual que la entrada de FreeBASIC.
Chipmunk Basic
10 CLS
20 FOR t = 0 TO 9
30 FOR u = 1 TO 10
40 n = 10 * t + u
50 GOSUB 110
60 PRINT USING "## "; m;
70 NEXT u
80 PRINT
90 NEXT t
100 END
110 IF n = 1 THEN m = 1: RETURN
120 m = 1: f = 2
130 IF n MOD (f * f) = 0 THEN m = 0: RETURN
140 IF n MOD f = 0 THEN GOSUB 180
150 f = f + 1
160 IF f <= n THEN GOTO 130
170 RETURN
180 m = -m
190 n = n / f
200 RETURN
210 END
- Output:
Same as GW-BASIC entry.
FreeBASIC
function mobius( n as uinteger ) as integer
if n = 1 then return 1
for d as uinteger = 2 to int(sqr(n))
if n mod d = 0 then
if n mod (d*d) = 0 then return 0
return -mobius(n/d)
end if
next d
return -1
end function
dim as string outstr = " . "
for i as uinteger = 1 to 200
if mobius(i)>=0 then outstr += " "
outstr += str(mobius(i))+" "
if i mod 10 = 9 then
print outstr
outstr = ""
end if
next i
- Output:
. 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
FutureBasic
local fn IsPrime( n as long ) as BOOL
BOOL result = YES
long i
if ( n < 2 ) then result = NO : exit fn
for i = 2 to n + 1
if ( i * i <= n ) and ( n mod i == 0 )
result = NO : exit fn
end if
next
end fn = result
local fn Mobius( n as long ) as long
long i, p = 0, result = 0
if ( n == 1 ) then result = 1 : exit fn
for i = 1 to n + 1
if ( n mod i == 0 ) and ( fn IsPrime( i ) == YES )
if ( n mod ( i * i ) == 0 )
result = 0 : exit fn
else
p++
end if
end if
next
if( p mod 2 != 0 )
result = -1
else
result = 1
end if
end fn = result
window 1, @"Möbius function", (0,0,600,300)
printf @"First 100 terms of Mobius sequence:"
long i
for i = 1 to 100
printf @"%2ld\t", fn Mobius(i)
if ( i mod 20 == 0 ) then print
next
HandleEvents
- Output:
First 100 terms of Mobius sequence: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0
Gambas
Public Sub Main()
Dim outstr As String = " . "
For i As Integer = 1 To 200
If mobius(i) >= 0 Then outstr &= " "
outstr &= Str(mobius(i)) & " "
If i Mod 10 = 9 Then
Print outstr
outstr = ""
End If
Next
End
Function mobius(n As Integer) As Integer
If n = 1 Then Return 1
For d As Integer = 2 To Int(Sqr(n))
If n Mod d = 0 Then
If n Mod (d * d) = 0 Then Return 0
Return -mobius(n / d)
End If
Next
Return -1
End Function
- Output:
Same as FreeBASIC entry.
GW-BASIC
10 FOR T = 0 TO 9
20 FOR U = 1 TO 10
30 N = 10*T + U
40 GOSUB 100
50 PRINT USING "## ";M;
60 NEXT U
70 PRINT
80 NEXT T
90 END
100 IF N = 1 THEN M = 1 : RETURN
110 M = 1 : F = 2
120 IF N MOD (F*F) = 0 THEN M = 0 : RETURN
130 IF N MOD F = 0 THEN GOSUB 170
140 F = F + 1
150 IF F <= N THEN GOTO 120
160 RETURN
170 M = -M
180 N = N/F
190 RETURN
- Output:
1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0
Minimal BASIC
10 REM Moebius function
20 FOR T = 0 TO 9
30 FOR U = 1 TO 10
40 LET N = 10*T+U
50 GOSUB 110
60 PRINT M;" ";
70 NEXT U
80 PRINT
90 NEXT T
100 END
110 LET M = 1
120 IF N = 1 THEN 230
130 LET F = 2
140 LET F2 = F*F
150 IF INT(N/F2)*F2 <> N THEN 180
160 LET M = 0
170 GOTO 230
180 IF INT(N/F)*F <> N THEN 210
190 LET M = -M
200 LET N = N/F
210 LET F = F+1
220 IF F <= N THEN 140
230 RETURN
MSX Basic
The GW-BASIC solution works without any changes.
PureBasic
Procedure.i mobius(n)
If n = 1:
ProcedureReturn 1
EndIf
For d = 2 To Int(Sqr(n))
If Mod(n, d) = 0:
If Mod(n, d * d) = 0:
ProcedureReturn 0
EndIf
ProcedureReturn -mobius(n / d)
EndIf
Next d
ProcedureReturn -1
EndProcedure
OpenConsole()
outstr$ = " . "
For i = 1 To 200
If mobius(i) >= 0:
outstr$ = outstr$ + " "
EndIf
outstr$ = outstr$ + Str(mobius(i)) + " "
If Mod(i, 10) = 9:
PrintN(outstr$)
outstr$ = ""
EndIf
Next i
PrintN(#CRLF$ + "Press ENTER to exit"): Input()
CloseConsole()
- Output:
Same as FreeBASIC entry.
Tiny BASIC
Tiny BASIC is not suited for printing tables, so this is limited to prompting for a single number and calculating its Mobius number.
PRINT "Enter an integer"
INPUT N
IF N < 0 THEN LET N = -N
IF N < 2 THEN GOTO 100 + N
LET C = 1
LET F = 2
10 IF ((N/F)/F)*F*F = N THEN GOTO 100
IF (N/F)*F = N THEN GOTO 30
20 LET F = F + 1
IF F<=N THEN GOTO 10
GOTO 100 + C
30 LET N = N / F
LET C = -C
GOTO 20
99 PRINT "-1"
END
100 PRINT "0"
END
101 PRINT "1"
END
XBasic
PROGRAM "Möbius function"
VERSION "0.0000"
IMPORT "xma"
DECLARE FUNCTION Entry ()
DECLARE FUNCTION mobius (n)
FUNCTION Entry ()
outstr$ = " . "
FOR i = 1 TO 200
IF mobius(i) >= 0 THEN outstr$ = outstr$
outstr$ = outstr$ + STR$(mobius(i)) + " "
IF i MOD 10 = 9 THEN
PRINT outstr$
outstr$ = ""
END IF
NEXT i
END FUNCTION
FUNCTION mobius (n)
IF n = 1 THEN RETURN 1
FOR d = 2 TO INT(SQRT(n))
IF n MOD d = 0 THEN
IF n MOD (d*d) = 0 THEN RETURN 0
RETURN -mobius(n/d)
END IF
NEXT d
RETURN -1
END FUNCTION
END PROGRAM
- Output:
Same as FreeBASIC entry.
Yabasic
outstr$ = " . "
for i = 1 to 200
if mobius(i) >= 0 then outstr$ = outstr$ + " " : fi
outstr$ = outstr$ + str$(mobius(i)) + " "
if mod(i, 10) = 9 then
print outstr$
outstr$ = ""
end if
next i
end
sub mobius(n)
if n = 1 then return 1 : fi
for d = 2 to int(sqr(n))
if mod(n, d) = 0 then
if mod(n, (d*d)) = 0 then return 0 : fi
return -mobius(n/d)
end if
next d
return -1
end sub
C
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main() {
const int MU_MAX = 1000000;
int i, j;
int *mu;
int sqroot;
sqroot = (int)sqrt(MU_MAX);
mu = malloc((MU_MAX + 1) * sizeof(int));
for (i = 0; i < MU_MAX;i++) {
mu[i] = 1;
}
for (i = 2; i <= sqroot; i++) {
if (mu[i] == 1) {
// for each factor found, swap + and -
for (j = i; j <= MU_MAX; j += i) {
mu[j] *= -i;
}
// square factor = 0
for (j = i * i; j <= MU_MAX; j += i * i) {
mu[j] = 0;
}
}
}
for (i = 2; i <= MU_MAX; i++) {
if (mu[i] == i) {
mu[i] = 1;
} else if (mu[i] == -i) {
mu[i] = -1;
} else if (mu[i] < 0) {
mu[i] = 1;
} else if (mu[i] > 0) {
mu[i] = -1;
}
}
printf("First 199 terms of the möbius function are as follows:\n ");
for (i = 1; i < 200; i++) {
printf("%2d ", mu[i]);
if ((i + 1) % 20 == 0) {
printf("\n");
}
}
free(mu);
return 0;
}
- Output:
First 199 terms of the m÷bius function are as follows: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
C++
#include <iomanip>
#include <iostream>
#include <vector>
constexpr int MU_MAX = 1'000'000;
std::vector<int> MU;
int mobiusFunction(int n) {
if (!MU.empty()) {
return MU[n];
}
// Populate array
MU.resize(MU_MAX + 1, 1);
int root = sqrt(MU_MAX);
for (int i = 2; i <= root; i++) {
if (MU[i] == 1) {
// for each factor found, swap + and -
for (int j = i; j <= MU_MAX; j += i) {
MU[j] *= -i;
}
// square factor = 0
for (int j = i * i; j <= MU_MAX; j += i * i) {
MU[j] = 0;
}
}
}
for (int i = 2; i <= MU_MAX; i++) {
if (MU[i] == i) {
MU[i] = 1;
} else if (MU[i] == -i) {
MU[i] = -1;
} else if (MU[i] < 0) {
MU[i] = 1;
} else if (MU[i] > 0) {
MU[i] = -1;
}
}
return MU[n];
}
int main() {
std::cout << "First 199 terms of the möbius function are as follows:\n ";
for (int n = 1; n < 200; n++) {
std::cout << std::setw(2) << mobiusFunction(n) << " ";
if ((n + 1) % 20 == 0) {
std::cout << '\n';
}
}
return 0;
}
- Output:
First 199 terms of the m÷bius function are as follows: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
D
import std.math;
import std.stdio;
immutable MU_MAX = 1_000_000;
int mobiusFunction(int n) {
static initialized = false;
static int[MU_MAX + 1] MU;
if (initialized) {
return MU[n];
}
// populate array
MU[] = 1;
int root = cast(int) sqrt(cast(real) MU_MAX);
for (int i = 2; i <= root; i++) {
if (MU[i] == 1) {
// for each factor found, swap + and -
for (int j = i; j <= MU_MAX; j += i) {
MU[j] *= -i;
}
// square factor = 0
for (int j = i * i; j <= MU_MAX; j += i * i) {
MU[j] = 0;
}
}
}
for (int i = 2; i <= MU_MAX; i++) {
if (MU[i] == i) {
MU[i] = 1;
} else if (MU[i] == -i) {
MU[i] = -1;
} else if (MU[i] < 0) {
MU[i] = 1;
} else if (MU[i] > 0) {
MU[i] = -1;
}
}
initialized = true;
return MU[n];
}
void main() {
writeln("First 199 terms of the möbius function are as follows:");
write(" ");
for (int n = 1; n < 200; n++) {
writef("%2d ", mobiusFunction(n));
if ((n + 1) % 20 == 0) {
writeln;
}
}
}
- Output:
First 199 terms of the m├╢bius function are as follows: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Delphi
Rather than being clever and trying to perform the task in the smallest number of lines possible, this solution breaks the problem down into its fundamental pieces and solves each one in a separate subroutine. This programming style makes the code easier understand, debug and enhance the code. While the technique is not necessary on simple problems like this, it is essential for larger and more complex programs.
function IsPrime(N: int64): boolean;
{Fast, optimised prime test}
var I,Stop: int64;
begin
if (N = 2) or (N=3) then Result:=true
else if (n <= 1) or ((n mod 2) = 0) or ((n mod 3) = 0) then Result:= false
else
begin
I:=5;
Stop:=Trunc(sqrt(N+0.0));
Result:=False;
while I<=Stop do
begin
if ((N mod I) = 0) or ((N mod (I + 2)) = 0) then exit;
Inc(I,6);
end;
Result:=True;
end;
end;
function GetNextPrime(var Start: integer): integer;
{Get the next prime number after Start}
{Start is passed by "reference," so the
{original variable is incremented}
begin
repeat Inc(Start)
until IsPrime(Start);
Result:=Start;
end;
type TIntArray = array of integer;
procedure StoreNumber(N: integer; var IA: TIntArray);
{Expand and store number in array}
begin
SetLength(IA,Length(IA)+1);
IA[High(IA)]:=N;
end;
procedure GetPrimeFactors(N: integer; var Facts: TIntArray);
{Get all the prime factors of a number}
var I: integer;
begin
I:=2;
repeat
begin
if (N mod I) = 0 then
begin
StoreNumber(I,Facts);
N:=N div I;
end
else GetNextPrime(I);
end
until N=1;
end;
function HasDuplicates(IA: TIntArray): boolean;
{Look for duplicates factors in array}
var I: integer;
begin
Result:=True;
for I:=0 to Length(IA)-1 do
if IA[I]=IA[I+1] then exit;
Result:=False;
end;
function Moebius(N: integer): integer;
{Get moebius function of number}
var I: integer;
var Factors: TIntArray;
var Even,Square: boolean;
begin
{Collect all prime factors}
SetLength(Factors,0);
GetPrimeFactors(N,Factors);
{Are there an even number of factors?}
Even:=(Length(Factors) and 1)=0;
{If there are duplicates, there are perfect squares}
Square:=HasDuplicates(Factors);
{Return the Moebius function value}
if Square then Result:=0
else if Even then Result:=1
else Result:=-1;
end;
procedure TestMoebiusFactors(Memo: TMemo);
{Test Moebius function for 1..200-1}
var N,M: integer;
var S: string;
begin
S:='';
for N:=1 to 199 do
begin
M:=Moebius(N);
S:=S+Format('%3d',[M]);
if (N mod 20)=19 then S:=S+#$0D#$0A
end;
Memo.Text:=S;
end;
- Output:
1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
EasyLang
mu_max = 100000
sqroot = floor sqrt mu_max
#
for i to mu_max
mu[] &= 1
.
for i = 2 to sqroot
if mu[i] = 1
for j = i step i to mu_max
mu[j] *= -i
.
for j = i * i step i * i to mu_max
mu[j] = 0
.
.
.
for i = 2 to mu_max
if mu[i] = i
mu[i] = 1
elif mu[i] = -i
mu[i] = -1
elif mu[i] < 0
mu[i] = 1
elif mu[i] > 0
mu[i] = -1
.
.
numfmt 0 3
for i = 1 to 100
write mu[i]
if i mod 10 = 0
print ""
.
.
F#
This task uses Extensible Prime Generator (F#)
// Möbius function. Nigel Galloway: January 31st., 2021
let fN g=let n=primes32()
let rec fN i g e l=match (l/g,l%g,e) with (1,0,false)->i
|(n,0,false)->fN (0-i) g true n
|(_,0,true) ->0
|_ ->fN i (Seq.head n) false l
fN -1 (Seq.head n) false g
let mobius=seq{yield 1; yield! Seq.initInfinite((+)2>>fN)}
mobius|>Seq.take 500|>Seq.chunkBySize 25|>Seq.iter(fun n->Array.iter(printf "%3d") n;printfn "")
- Output:
1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1 0 1 1 1 0 1 1 0 0 1 1 -1 0 1 1 1 0 1 1 1 0 1 -1 -1 0 0 1 -1 0 -1 -1 -1 0 -1 0 1 0 1 -1 -1 0 -1 0 0 0 0 -1 1 0 1 0 -1 0 1 1 -1 0 -1 -1 1 0 0 1 -1 0 1 -1 1 0 -1 0 -1 0 -1 1 0 0 -1 1 0 0 -1 -1 -1 0 -1 -1 1 0 0 -1 1 0 -1 0 1 0 0 1 1 0 1 1 1 0 1 0 -1 0 1 -1 -1 0 -1 1 0 0 -1 -1 1 0 1 -1 1 0 0 1 1 0 1 1 -1 0 0 1 1 0 -1 0 1 0 1 0 0 0 -1 1 -1 0 -1 0 0 0 -1 -1 1 0 -1 1 -1 0 0 1 0 0 1 -1 -1 0 0 -1 1 0 -1 -1 0 0 1 0 -1 0 1 1 -1 0 -1 1 0 0 -1 1 1 0 1 1 1 0 -1 1 -1 0 -1 -1 1 0 0 -1 1 0 -1 -1 1 0 1 0 1 0 1 -1 -1 0 -1 1 0 0 0 -1 1 0 -1 -1 -1 0 -1 -1 -1 0 1 -1 -1 0 0 -1 -1 0 1 1 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 -1 1 -1 0 -1 1 -1 0 1 -1 1 0 1 -1 0 0 0 1 -1 0 1 1 -1 0 1 0 -1 0 1 0 -1 0 1 -1 0 0 1 -1 -1 0
Factor
The mobius
word exists in the math.extras
vocabulary. See the implementation here.
USING: formatting grouping io math.extras math.ranges sequences ;
"First 199 terms of the Möbius sequence:" print
199 [1,b] [ mobius ] map " " prefix 20 group
[ [ "%3s" printf ] each nl ] each
- Output:
First 199 terms of the Möbius sequence: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Fortran
program moebius
use iso_fortran_env, only: output_unit
integer, parameter :: mu_max=1000000, line_break=20
integer, parameter :: sqroot=int(sqrt(real(mu_max)))
integer :: i, j
integer, dimension(mu_max) :: mu
mu = 1
do i = 2, sqroot
if (mu(i) == 1) then
do j = i, mu_max, i
mu(j) = mu(j) * (-i)
end do
do j = i**2, mu_max, i**2
mu(j) = 0
end do
end if
end do
do i = 2, mu_max
if (mu(i) == i) then
mu(i) = 1
else if (mu(i) == -i) then
mu(i) = -1
else if (mu(i) < 0) then
mu(i) = 1
else if (mu(i) > 0) then
mu(i) = -1
end if
end do
write(output_unit,*) "The first 199 terms of the Möbius sequence are:"
write(output_unit,'(3x)', advance="no") ! Alignment of first number
do i = 1, 199
write(output_unit,'(I2,x)', advance="no") mu(i)
if (modulo(i+1, line_break) == 0) write(output_unit,*)
end do
end program moebius
- Output:
The first 199 terms of the Möbius sequence are: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Go
package main
import "fmt"
func möbius(to int) []int {
if to < 1 {
to = 1
}
mobs := make([]int, to+1) // all zero by default
primes := []int{2}
for i := 1; i <= to; i++ {
j := i
cp := 0 // counts prime factors
spf := false // true if there is a square prime factor
for _, p := range primes {
if p > j {
break
}
if j%p == 0 {
j /= p
cp++
}
if j%p == 0 {
spf = true
break
}
}
if cp == 0 && i > 2 {
cp = 1
primes = append(primes, i)
}
if !spf {
if cp%2 == 0 {
mobs[i] = 1
} else {
mobs[i] = -1
}
}
}
return mobs
}
func main() {
mobs := möbius(199)
fmt.Println("Möbius sequence - First 199 terms:")
for i := 0; i < 200; i++ {
if i == 0 {
fmt.Print(" ")
continue
}
if i%20 == 0 {
fmt.Println()
}
fmt.Printf(" % d", mobs[i])
}
}
- Output:
Möbius sequence - First 199 terms: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Haskell
import Data.List (intercalate)
import Data.List.Split (chunksOf)
import Data.Vector.Unboxed (toList)
import Math.NumberTheory.ArithmeticFunctions.Moebius (Moebius(..),
sieveBlockMoebius)
import System.Environment (getArgs, getProgName)
import System.IO (hPutStrLn, stderr)
import Text.Read (readMaybe)
-- Calculate the Möbius function, μ(n), for a sequence of values starting at 1.
moebiusBlock :: Word -> [Moebius]
moebiusBlock = toList . sieveBlockMoebius 1
showMoebiusBlock :: Word -> [Moebius] -> String
showMoebiusBlock cols = intercalate "\n" . map (concatMap showMoebius) .
chunksOf (fromIntegral cols)
where showMoebius MoebiusN = " -1"
showMoebius MoebiusZ = " 0"
showMoebius MoebiusP = " 1"
main :: IO ()
main = do
prog <- getProgName
args <- map readMaybe <$> getArgs
case args of
[Just cols, Just n] ->
putStrLn ("μ(n) for 1 ≤ n ≤ " ++ show n ++ ":\n") >>
putStrLn (showMoebiusBlock cols $ moebiusBlock n)
_ -> hPutStrLn stderr $ "Usage: " ++ prog ++ " num-columns maximum-number"
- Output:
μ(n) for 1 ≤ n ≤ 200: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1 0
J
Implementation:
mu=: */@:-@~:@q:
Explanation: q: n
gives the list of prime factors of n. (This is an empty list for the number 1, is 2 2 5 5
for the number 100, and is 2 2 2 3 5
for the number 120.)
In this context ~:
replaces each prime factor either by 1, if it is its first occurrence, or by 0, if it is a repetition (e.g. 2 2 5 5
→ 1 0 1 0
). Then, -
simply negates this list (e.g. 1 0 1 0
→ _1 0 _1 0
), and finally */
multiplies all list elements to get the desired result.
Task example:
mu >: i. 10 20
1 _1 _1 0 _1 1 _1 0 0 1 _1 0 _1 1 1 0 _1 0 _1 0
1 1 _1 0 0 1 0 0 _1 _1 _1 0 1 1 1 0 _1 1 1 0
_1 _1 _1 0 0 1 _1 0 0 0 1 0 _1 0 1 0 1 1 _1 0
_1 1 0 0 1 _1 _1 0 1 _1 _1 0 _1 1 0 0 1 _1 _1 0
0 1 _1 0 1 1 1 0 _1 0 1 0 1 1 1 0 _1 0 0 0
_1 _1 _1 0 _1 1 _1 0 _1 _1 1 0 _1 _1 1 0 0 1 1 0
0 1 1 0 0 0 _1 0 1 _1 _1 0 1 1 0 0 _1 _1 _1 0
1 1 1 0 1 1 0 0 _1 0 _1 0 0 _1 1 0 _1 1 1 0
1 0 _1 0 _1 1 _1 0 0 _1 0 0 _1 _1 0 0 1 1 _1 0
_1 _1 1 0 1 _1 1 0 0 _1 _1 0 _1 1 _1 0 _1 0 _1 0
Java
public class MöbiusFunction {
public static void main(String[] args) {
System.out.printf("First 199 terms of the möbius function are as follows:%n ");
for ( int n = 1 ; n < 200 ; n++ ) {
System.out.printf("%2d ", möbiusFunction(n));
if ( (n+1) % 20 == 0 ) {
System.out.printf("%n");
}
}
}
private static int MU_MAX = 1_000_000;
private static int[] MU = null;
// Compute mobius function via sieve
private static int möbiusFunction(int n) {
if ( MU != null ) {
return MU[n];
}
// Populate array
MU = new int[MU_MAX+1];
int sqrt = (int) Math.sqrt(MU_MAX);
for ( int i = 0 ; i < MU_MAX ; i++ ) {
MU[i] = 1;
}
for ( int i = 2 ; i <= sqrt ; i++ ) {
if ( MU[i] == 1 ) {
// for each factor found, swap + and -
for ( int j = i ; j <= MU_MAX ; j += i ) {
MU[j] *= -i;
}
// square factor = 0
for ( int j = i*i ; j <= MU_MAX ; j += i*i ) {
MU[j] = 0;
}
}
}
for ( int i = 2 ; i <= MU_MAX ; i++ ) {
if ( MU[i] == i ) {
MU[i] = 1;
}
else if ( MU[i] == -i ) {
MU[i] = -1;
}
else if ( MU[i] < 0 ) {
MU[i] = 1;
}
else if ( MU[i] > 0 ) {
MU[i] = -1;
}
}
return MU[n];
}
}
- Output:
First 199 terms of the möbius function are as follows: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
jq
Works with gojq, the Go implementation of jq
Using a Sieve
Adapted from C
# Input: a non-negative integer, $n
# Output: an array of size $n + 1 such that the nth-mobius number is .[$n]
# i.e. $n|mobius_array[-1]
# For example, the first mobius number could be evaluated by 1|mobius_array[-1].
def mobius_array:
. as $n
| ($n|sqrt) as $sqrt
| reduce range(2; 1 + $sqrt) as $i ([range(0; $n + 1) | 1];
if .[$i] == 1
then # for each factor found, swap + and -
reduce range($i; $n + 1; $i) as $j (.; .[$j] *= -$i)
| ($i*$i) as $isq # square factor = 0
| reduce range($isq; $n + 1; $isq) as $j (.; .[$j] = 0 )
else .
end )
| reduce range(2; 1 + $n) as $i (.;
if .[$i] == $i then .[$i] = 1
elif .[$i] == -$i then .[$i] = -1
elif .[$i] < 0 then .[$i] = 1
elif .[$i] > 0 then .[$i] = -1
else .[$i] = 0 # avoid "-0"
end);
# For one-off computations:
def mu($n): $n | mobius_array[-1];
The Task
def nwise($n):
def n: if length <= $n then . else .[0:$n] , (.[$n:] | n) end;
n;
def task:
def pp: if . >=0 then " \(.)" else tostring end;
(199 | mobius_array) as $mu
| "The first 199 Möbius numbers are:",
([" ", (range(1; 200) | $mu[.] | pp )]
| nwise(20)
| join(" ") ) ;
task
- Output:
The first 199 Möbius numbers are: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Prime Factors
Note that the following solution to the task at hand (computing a range of Mobius numbers is inefficient as it does not cache the primes array. Preliminaries
# relatively_prime(previous) tests whether the input integer is prime
# relative to the primes in the array "previous":
def relatively_prime(previous):
. as $in
| (previous|length) as $plen
# state: [found, ix]
| [false, 0]
| until( .[0] or .[1] >= $plen;
[ ($in % previous[.[1]]) == 0, .[1] + 1] )
| .[0] | not ;
# Emit a stream in increasing order of all primes (from 2 onwards)
# that are less than or equal to mx:
def primes(mx):
# The helper function, next, has arity 0 for tail recursion optimization;
# it expects its input to be the array of previously found primes:
def next:
. as $previous
| ($previous | .[length-1]) as $last
| if ($last >= mx) then empty
else ((2 + $last)
| until( relatively_prime($previous) ; . + 2)) as $nextp
| if $nextp <= mx
then $nextp, (( $previous + [$nextp] ) | next)
else empty
end
end;
if mx <= 1 then empty
elif mx == 2 then 2
else (2, 3, ([2,3] | next))
end ;
# Return an array of the distinct prime factors of . in increasing order
def prime_factors:
# Return an array of prime factors of . given that "primes"
# is an array of relevant primes:
def pf($primes):
if . <= 1 then []
else . as $in
| if ($in | relatively_prime($primes)) then [$in]
else reduce $primes[] as $p
([];
if ($in % $p) != 0 then .
else . + [$p] + (($in / $p) | pf($primes))
end)
end
| unique
end;
if . <= 1 then []
else . as $in
| pf( [ primes( (1+$in) | sqrt | floor) ] )
end;
Mu
def isSquareFree:
. as $n
| 2
| until ( (. * . > $n) or . == 0;
if ($n % (.*.) == 0) then 0 # i.e. stop
elif . > 2 then . + 2
else . + 1
end )
| . != 0;
def mu:
. as $n
| if . < 1 then "Argument to mu must be a positive integer" | error
elif . == 1 then 1
else if isSquareFree
then if ((prime_factors|length) % 2 == 0) then 1
else -1
end
else 0
end
end;
The Task
def nwise($n):
def n: if length <= $n then . else .[0:$n] , (.[$n:] | n) end;
n;
def task:
def pp: if . >=0 then " \(.)" else tostring end;
"The first 199 Möbius numbers are:",
([" ", (range(1; 200) | mu | pp )]
| nwise(20)
| join(" ") ) ;
task
- Output:
As above.
Julia
using Primes
# modified from reinermartin's PR at https://github.com/JuliaMath/Primes.jl/pull/70/files
function moebius(n::Integer)
@assert n > 0
m(p, e) = p == 0 ? 0 : e == 1 ? -1 : 0
reduce(*, m(p, e) for (p, e) in factor(n) if p ≥ 0; init=1)
end
μ(n) = moebius(n)
print("First 199 terms of the Möbius sequence:\n ")
for n in 1:199
print(lpad(μ(n), 3), n % 20 == 19 ? "\n" : "")
end
- Output:
First 199 terms of the Möbius sequence: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Kotlin
import kotlin.math.sqrt
fun main() {
println("First 199 terms of the möbius function are as follows:")
print(" ")
for (n in 1..199) {
print("%2d ".format(mobiusFunction(n)))
if ((n + 1) % 20 == 0) {
println()
}
}
}
private const val MU_MAX = 1000000
private var MU: IntArray? = null
// Compute mobius function via sieve
private fun mobiusFunction(n: Int): Int {
if (MU != null) {
return MU!![n]
}
// Populate array
MU = IntArray(MU_MAX + 1)
val sqrt = sqrt(MU_MAX.toDouble()).toInt()
for (i in 0 until MU_MAX) {
MU!![i] = 1
}
for (i in 2..sqrt) {
if (MU!![i] == 1) {
// for each factor found, swap + and -
for (j in i..MU_MAX step i) {
MU!![j] *= -i
}
// square factor = 0
for (j in i * i..MU_MAX step i * i) {
MU!![j] = 0
}
}
}
for (i in 2..MU_MAX) {
when {
MU!![i] == i -> {
MU!![i] = 1
}
MU!![i] == -i -> {
MU!![i] = -1
}
MU!![i] < 0 -> {
MU!![i] = 1
}
MU!![i] > 0 -> {
MU!![i] = -1
}
}
}
return MU!![n]
}
- Output:
First 199 terms of the möbius function are as follows: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Lua
function buildArray(size, value)
local tbl = {}
for i=1, size do
table.insert(tbl, value)
end
return tbl
end
MU_MAX = 1000000
sqroot = math.sqrt(MU_MAX)
mu = buildArray(MU_MAX, 1)
for i=2, sqroot do
if mu[i] == 1 then
-- for each factor found, swap + and -
for j=i, MU_MAX, i do
mu[j] = mu[j] * -i
end
-- square factor = 0
for j=i*i, MU_MAX, i*i do
mu[j] = 0
end
end
end
for i=2, MU_MAX do
if mu[i] == i then
mu[i] = 1
elseif mu[i] == -i then
mu[i] = -1
elseif mu[i] < 0 then
mu[i] = 1
elseif mu[i] > 0 then
mu[i] = -1
end
end
print("First 199 terms of the mobius function are as follows:")
io.write(" ")
for i=1, 199 do
io.write(string.format("%2d ", mu[i]))
if (i + 1) % 20 == 0 then
print()
end
end
- Output:
First 199 terms of the mobius function are as follows: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Mathematica /Wolfram Language
Grid[Partition[MoebiusMu[Range[99]], UpTo[10]]]
- Output:
1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0
Nim
Uses the prime decomposition method from https://rosettacode.org/wiki/Prime_decomposition#Nim
import std/[math, sequtils, strformat]
func getStep(n: int): int {.inline.} =
result = 1 + n shl 2 - n shr 1 shl 1
func primeFac(n: int): seq[int] =
var
maxq = int(sqrt(float(n)))
d = 1
q: int = 2 + (n and 1) # Start with 2 or 3 according to oddity.
while q <= maxq and n %% q != 0:
q = getStep(d)
inc d
if q <= maxq:
let q1 = primeFac(n /% q)
let q2 = primeFac(q)
result = concat(q2, q1, result)
else:
result.add(n)
func squareFree(num: int): bool =
let fact = primeFac num
for i in fact:
if fact.count(i) > 1:
return false
return true
func mobius(num: int): int =
if num == 1: return num
let fact = primeFac num
for i in fact:
## check if it has a squared prime factor
if fact.count(i) == 2:
return 0
if num.squareFree:
if fact.len mod 2 == 0:
return 1
else:
return -1
when isMainModule:
echo "The first 199 möbius numbers are:"
for i in 1..199:
stdout.write fmt"{mobius(i):4}"
if i mod 20 == 0:
echo "" # print newline
- Output:
The first 199 möbius numbers are: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1 0
PARI/GP
{
for(i = 1, 99,
print1(moebius(i) " ");
if(i % 10 == 0, print("\n"););
);
}
- Output:
1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0
Pascal
See Mertens_function#Pascal
Perl
use utf8;
use strict;
use warnings;
use feature 'say';
use List::Util 'uniq';
sub prime_factors {
my ($n, $d, @factors) = (shift, 1);
while ($n > 1 and $d++) {
$n /= $d, push @factors, $d until $n % $d;
}
@factors
}
sub μ {
my @p = prime_factors(shift);
@p == uniq(@p) ? 0 == @p%2 ? 1 : -1 : 0;
}
my @möebius;
push @möebius, μ($_) for 1 .. (my $upto = 199);
say "Möbius sequence - First $upto terms:\n" .
(' 'x4 . sprintf "@{['%4d' x $upto]}", @möebius) =~ s/((.){80})/$1\n/gr;
- Output:
Möbius sequence - First 199 terms: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Phix
with javascript_semantics function Moebius(integer n) if n=1 then return 1 end if sequence f = prime_factors(n,true) for i=2 to length(f) do if f[i] = f[i-1] then return 0 end if end for return iff(odd(length(f))?-1:+1) end function sequence s = {" ."} for i=1 to 199 do s = append(s,sprintf("%3d",Moebius(i))) end for puts(1,join_by(s,1,20," "))
- Output:
. 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Python
Everything verbatim from: https://www.geeksforgeeks.org/program-mobius-function/
All code by: Manish Shaw
Method 1
We iterate through all numbers i smaller than or equal to N. For every number we check if it divides N. If yes, we check if it’s also prime. If both conditions are satisfied, we check if its square also divides N. If yes, we return 0. If the square doesn’t divide, we increment count of prime factors. Finally, we return 1 if there are an even number of prime factors and return -1 if there are odd number of prime factors.
# Python Program to evaluate
# Mobius def M(N) = 1 if N = 1
# M(N) = 0 if any prime factor
# of N is contained twice
# M(N) = (-1)^(no of distinct
# prime factors)
# Python Program to
# evaluate Mobius def
# M(N) = 1 if N = 1
# M(N) = 0 if any
# prime factor of
# N is contained twice
# M(N) = (-1)^(no of
# distinct prime factors)
# def to check if
# n is prime or not
def isPrime(n) :
if (n < 2) :
return False
for i in range(2, n + 1) :
if (i * i <= n and n % i == 0) :
return False
return True
def mobius(N) :
# Base Case
if (N == 1) :
return 1
# For a prime factor i
# check if i^2 is also
# a factor.
p = 0
for i in range(1, N + 1) :
if (N % i == 0 and
isPrime(i)) :
# Check if N is
# divisible by i^2
if (N % (i * i) == 0) :
return 0
else :
# i occurs only once,
# increase f
p = p + 1
# All prime factors are
# contained only once
# Return 1 if p is even
# else -1
if(p % 2 != 0) :
return -1
else :
return 1
# Driver Code
print("Mobius numbers from 1..99:")
for i in range(1, 100):
print(f"{mobius(i):>4}", end = '')
if i % 20 == 0: print()
# This code is contributed by
# Manish Shaw(manishshaw1)
- Output:
Mobius numbers from 1..99: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0
Method 2 (Efficient)
The idea is based on efficient program to print all prime factors of a given number. The interesting thing is, we do not need inner while loop here because if a number divides more than once, we can immediately return 0.
- BUGS ! mu(1): computes -1, correct 1
- BUGS ! mu(2): computes 1, correct -1
- BUGS ! mu(105): computes 1, correct -1
- BUGS ! ...
- Some other programs say: "Translation of Python", probably of this one.
# Python Program to evaluate
# Mobius def M(N) = 1 if N = 1
# M(N) = 0 if any prime factor
# of N is contained twice
# M(N) = (-1)^(no of distinct
# prime factors)
import math
# def to check if n
# is prime or not
def isPrime(n) :
if (n < 2) :
return False
for i in range(2, n + 1) :
if (n % i == 0) :
return False
i = i * i
return True
def mobius(n) :
p = 0
# Handling 2 separately
if (n % 2 == 0) :
n = int(n / 2)
p = p + 1
# If 2^2 also
# divides N
if (n % 2 == 0) :
return 0
# Check for all
# other prime factors
for i in range(3, int(math.sqrt(n)) + 1) :
# If i divides n
if (n % i == 0) :
n = int(n / i)
p = p + 1
# If i^2 also
# divides N
if (n % i == 0) :
return 0
i = i + 2
if(p % 2 == 0) :
return -1
else :
return 1
# Driver Code
print("Mobius numbers from 1..99:")
for i in range(1, 100):
print(f"{mobius(i):>4}", end = '')
# This code is contributed by
# Manish Shaw(manishshaw1)
- Output:
Mobius numbers from 1..99: -1 1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0
Quackery
primefactors
is defined at Prime decomposition#Quackery.
[ false swap
behead swap
[ witheach
[ tuck != if
done
dip not
conclude ] ]
drop ] is square ( [ --> b )
[ 1 & ] is odd ( n --> b )
[ dup 1 = if done
primefactors
dup square iff
[ drop 0 ] done
size odd iff
-1 else 1 ] is mobius ( n --> n )
say "First 199 terms:" cr
say " "
199 times
[ i^ 1+ mobius
dup -1 > if sp
echo
i^ 1+ 20 mod
19 = iff cr
else [ sp sp ] ]
- Output:
First 199 terms: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Raku
(formerly Perl 6)
Möbius number is not defined for n == 0. Raku arrays are indexed from 0 so store a blank value at position zero to keep n and μ(n) aligned.
use Prime::Factor;
sub μ (Int \n) {
return 0 if n %% (4|9|25|49|121);
my @p = prime-factors(n);
+@p == +@p.unique ?? +@p %% 2 ?? 1 !! -1 !! 0
}
my @möbius = lazy flat '', 1, (2..*).hyper.map: &μ;
# The Task
put "Möbius sequence - First 199 terms:\n",
@möbius[^200]».fmt('%3s').batch(20).join: "\n";
- Output:
Möbius sequence - First 199 terms: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
REXX
Version 1
Note that the Möbius function is also spelled Mobius and/or Moebius, and it is also known as the mu function, where mu is the Greek symbol μ.
Programming note: This REXX version supports the specifying of the low and high values to be generated,
as well as the group size for the grid (it can be specified as 1 which will show a vertical list).
A null value will be shown as a asterisk (*) when showing the Möbius value of for zero (this can be changed in the 2nd line of the mobius function).
The above "feature" was added to make the grid to be aligned with other solutions.
The function to compute some prime numbers is a bit of an overkill, but the goal was to keep it general (in case of larger/higher ranges for a Möbius sequence).
/*REXX pgm computes & shows a value grid of the Möbius function for a range of integers.*/
call time('r')
parse arg LO HI grp . /*obtain optional arguments from the CL*/
numeric digits 100
if LO=='' | LO=="," then LO= 0 /*Not specified? Then use the default.*/
if HI=='' | HI=="," then HI= 199 /* " " " " " " */
if grp=='' | grp=="," then grp= 20 /* " " " " " " */
/* uuuuuuuuuuuu */
call genP HI /*generate primes up to the v HI */
say center(' The Moebius sequence from ' LO " --> " HI" ", max(50, grp*3), '=') /*title*/
dd='' /*variable holds output grid of GRP hhs.*/
do j=LO to HI; dd= dd right( moebius(j), 2) /*process some numbers from LO --> HI.*/
if words(dd)==grp then do; say substr(dd, 2); dd='' /*show grid if fully populated,*/
end /* and nullify it for more hhs.*/
end /*j*/ /*for small grids, using wordCnt is OK.*/
if dd\=='' then say substr(dd, 2) /*handle any residual numbers not shown*/
say format(time('e'),,3) 'seconds'
exit /*stick a fork in it, we're all done. */
/*--------------------------------------------------------------------------------------*/
moebius: procedure expose aa.; parse arg x /*obtain a integer to be tested for mu.*/
if x<1 then return '*' /*special? Then return symbol for null.*/
hh= 0 /*start with a value of zero. */
do k=1; p= aa.k /*get the Kth (pre-generated) prime.*/
if p>x then leave /*prime (P) > X? Then we're done. */
if p*p>x then do; hh= hh+1; leave /*prime (P**2 > X? Bump hh and leave.*/
end
if x//p==0 then do; hh= hh+1 /*X divisible by P? Bump mu number. */
x= x % p /* Divide by prime. */
if x//p==0 then return 0 /*X÷by P? Then return zero*/
end
end /*k*/ /*hh (below) is almost always small, <9*/
if hh//2==0 then return 1 /*Is hh even? Then return postive 1 */
return -1 /* " " odd? " " negative 1. */
/*--------------------------------------------------------------------------------------*/
genP: aa.1=2; aa.2=3; aa.3=5; aa.4=7; aa.5=11; aa.6= 13; nP=6 /*assign low primes; hh primes.*/
do lim=nP until lim*lim>=HI /*only keep primes up to the sqrt(HI).*/
end /*lim*/
do j=aa.nP+4 by 2 to HI /*only find odd primes from here on. */
parse var j '' -1 uu;if uu==5 then iterate /*Is last digit a "5"? Then not prime*/
if j// 3==0 then iterate /*is J divisible by 3? " " " */
if j// 7==0 then iterate /* " " " " 7? " " " */
if j//11==0 then iterate /* " " " " 11? " " " */
if j//13==0 then iterate /* " " " " 13? " " " */
do k=7 while k*k<=j /*divide by some generated odd primes. */
if j // aa.k==0 then iterate j /*Is J divisible by P? Then not prime*/
end /*k*/ /* [?] a prime (J) has been found. */
nP= nP+1; if nP<=HI then aa.nP= j /*bump prime count; assign prime to aa.*/
end /*j*/; return
- output:
Output note: note the use of a asterisk (*) to signify that a "null" is being shown (for the 0th entry).
First run (Regina, no parameters)
========== The Moebius sequence from 0 --> 199 ========== * 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1 0.001 seconds
Second run (Regina, parameters 100000 100199)
====== The Moebius sequence from 100000 --> 100199 ====== 0 1 1 -1 0 1 -1 1 0 0 1 1 0 1 1 -1 0 0 -1 -1 0 1 -1 1 0 0 0 1 0 1 1 1 0 1 -1 0 0 -1 -1 1 0 1 1 -1 0 1 1 1 0 -1 0 1 0 0 -1 1 0 -1 0 1 0 -1 0 1 0 1 1 0 0 -1 -1 0 0 -1 1 0 0 1 -1 0 0 1 -1 -1 0 -1 1 1 0 0 -1 1 0 -1 1 -1 0 1 0 1 0 -1 1 -1 0 1 1 0 0 -1 -1 -1 0 1 -1 1 0 1 -1 -1 0 1 -1 1 0 0 -1 1 0 -1 -1 1 0 1 0 -1 0 -1 1 1 0 1 1 0 0 1 -1 -1 0 1 0 -1 0 -1 1 1 0 1 -1 1 0 0 -1 -1 0 1 1 -1 0 -1 0 1 0 1 1 0 0 -1 -1 0 0 -1 1 -1 0 -1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 1 1.145 seconds
Third run (Regina, parameters 1000000 1000199)
===== The Moebius sequence from 1000000 --> 1000199 ===== 0 1 -1 -1 0 1 -1 1 0 1 1 1 0 -1 -1 1 0 0 1 1 0 1 -1 1 0 0 0 1 0 -1 -1 1 0 -1 1 0 0 -1 1 -1 0 0 1 -1 0 1 -1 1 0 1 0 -1 0 0 1 -1 0 1 1 -1 0 1 0 1 0 0 -1 1 0 1 1 0 0 -1 -1 0 0 -1 -1 1 0 -1 1 -1 0 1 1 1 0 0 0 1 0 -1 1 1 0 1 0 -1 0 1 -1 -1 0 -1 -1 0 0 1 1 1 0 1 1 1 0 -1 -1 -1 0 -1 -1 1 0 0 -1 1 0 -1 1 -1 0 -1 0 -1 0 -1 1 0 0 1 0 0 0 1 1 1 0 1 0 -1 0 1 -1 -1 0 1 -1 -1 0 0 -1 -1 0 1 1 1 0 1 0 -1 0 -1 1 0 0 1 1 0 0 1 1 -1 0 1 0 -1 0 1 -1 1 0 -1 1 0 0 0 -1 -1 32.700 seconds
Version 2
Libraries: How to use
Library: Numbers
Library: Functions
Scrolling thru the various solutions of this task, I see 2 main approaches. First, a customized and optimized solution, often containing some code that is also used in prime factorization. Second, a solution taking advantage of the presence of fancy (Bignum) fast libraries with function as Factors, IsPrime etc.
REXX does not have any useful libraries for the task. So I created my own (see above). I wanted to show here that even in REXX a neat structured way of programming is possible.
Let's go back to the definition of the Moebius function:
μ(1) is defined to be 1.
μ(n) = 1 if n is a square-free positive integer with an even number of prime factors.
μ(n) = −1 if n is a square-free positive integer with an odd number of prime factors.
μ(n) = 0 if n has a squared prime factor.
So what do we need? A procedure delivering the number of prime factors and the number of unique prime factors. If these 2 numbers are equal, than n is square-free otherwise not. Consider following program:
/*REXX pgm computes & shows a value grid of the Möbius function for a range of integers.*/
call time('r')
parse arg LO HI grp . /*obtain optional arguments from the CL*/
numeric digits 100
if LO=='' | LO=="," then LO= 0 /*Not specified? Then use the default.*/
if HI=='' | HI=="," then HI= 199 /* " " " " " " */
if grp=='' | grp=="," then grp= 20 /* " " " " " " */
/* ______ */
say center(' The Moebius sequence from ' LO " --> " HI" ", max(50, grp*3), '=') /*title*/
dd='' /*variable holds output grid of GRP #s.*/
do j=LO to HI; dd= dd right( moebius(j), 2) /*process some numbers from LO --> HI.*/
if words(dd)==grp then do; say substr(dd, 2); dd='' /*show grid if fully populated,*/
end /* and nullify it for more #s.*/
end /*j*/ /*for small grids, using wordCnt is OK.*/
if dd\=='' then say substr(dd, 2) /*handle any residual numbers not shown*/
say format(time('e'),,3) 'seconds'
exit /*stick a fork in it, we're all done. */
Moebius:
-- Moebius sequence
procedure expose glob.
arg x
-- Validity
if \ Whole(x) then
return 'X'
if x < 0 then
return 'X'
-- Special value
if x = 0 then
return '*'
-- Using # of (unique) prime factors
call Factors(x)
call Ufactors(x)
if glob.factor.0 = glob.ufactor.0 then
if even(glob.factor.0) then
return 1
else
return -1
else
return 0
include Functions
include Numbers
The task is solved in the small procedure Moebius. But this procedure needs a little more... check library Numbers.
It seems there's a LOT of overhead in this program:
Procedure (U)Factors not only counts (unique) factors, but also delivers then.
It performs a primality check to avoid attempts to factorize a prime number.
The primality test (Miller-Rabin) needs a random generator (Rand) and modular exponentiation (Powermod).
And there are 2 minor procedures: integer check (Whole) en even number check (Even)...
Why use such an approach? Well, I like to have standard components 'building blocks', useable in different contexts. And I take the overhead for granted, because it saves a lot of coding effort and duplicate code.
- Output:
Now let's check the correctness and performance of Version 2.
Run 1 (Regina no parameters)
========== The Moebius sequence from 0 --> 199 ========== * 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1 0.003 seconds
Run 2 (Regina, parameters 100000 100199)
====== The Moebius sequence from 100000 --> 100199 ====== 0 1 1 -1 0 1 -1 1 0 0 1 1 0 1 1 -1 0 0 -1 -1 0 1 -1 1 0 0 0 1 0 1 1 1 0 1 -1 0 0 -1 -1 1 0 1 1 -1 0 1 1 1 0 -1 0 1 0 0 -1 1 0 -1 0 1 0 -1 0 1 0 1 1 0 0 -1 -1 0 0 -1 1 0 0 1 -1 0 0 1 -1 -1 0 -1 1 1 0 0 -1 1 0 -1 1 -1 0 1 0 1 0 -1 1 -1 0 1 1 0 0 -1 -1 -1 0 1 -1 1 0 1 -1 -1 0 1 -1 1 0 0 -1 1 0 -1 -1 1 0 1 0 -1 0 -1 1 1 0 1 1 0 0 1 -1 -1 0 1 0 -1 0 -1 1 1 0 1 -1 1 0 0 -1 -1 0 1 1 -1 0 -1 0 1 0 1 1 0 0 -1 -1 0 0 -1 1 -1 0 -1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 1 0.006 seconds
Run 3 (Regina, parameters 1000000 1000199)
===== The Moebius sequence from 1000000 --> 1000199 ===== 0 1 -1 -1 0 1 -1 1 0 1 1 1 0 -1 -1 1 0 0 1 1 0 1 -1 1 0 0 0 1 0 -1 -1 1 0 -1 1 0 0 -1 1 -1 0 0 1 -1 0 1 -1 1 0 1 0 -1 0 0 1 -1 0 1 1 -1 0 1 0 1 0 0 -1 1 0 1 1 0 0 -1 -1 0 0 -1 -1 1 0 -1 1 -1 0 1 1 1 0 0 0 1 0 -1 1 1 0 1 0 -1 0 1 -1 -1 0 -1 -1 0 0 1 1 1 0 1 1 1 0 -1 -1 -1 0 -1 -1 1 0 0 -1 1 0 -1 1 -1 0 -1 0 -1 0 -1 1 0 0 1 0 0 0 1 1 1 0 1 0 -1 0 1 -1 -1 0 1 -1 -1 0 0 -1 -1 0 1 1 1 0 1 0 -1 0 -1 1 0 0 1 1 0 0 1 1 -1 0 1 0 -1 0 1 -1 1 0 -1 1 0 0 0 -1 -1 0.014 seconds
Run 4 (Regina, parameters 1000000000000 1000000000199)
The Moebius sequence from 1000000000000 --> 1000000000199 0 -1 -1 -1 0 -1 1 1 0 -1 0 1 0 1 -1 1 0 0 -1 -1 0 1 1 1 0 0 0 -1 0 -1 -1 -1 0 1 0 0 0 1 1 -1 0 1 -1 1 0 1 1 -1 0 1 0 -1 0 0 -1 1 0 1 1 1 0 -1 0 -1 0 1 1 -1 0 -1 1 0 0 1 -1 0 0 -1 -1 1 0 1 1 0 0 -1 -1 -1 0 0 -1 -1 0 1 -1 -1 0 1 0 -1 0 1 1 -1 0 1 -1 0 0 1 0 1 0 -1 -1 1 0 1 1 -1 0 -1 1 1 0 0 -1 1 0 -1 1 0 0 1 0 -1 0 1 -1 -1 0 1 -1 0 0 1 -1 1 0 1 0 -1 0 -1 1 1 0 0 -1 1 0 0 -1 -1 0 -1 1 1 0 -1 0 1 0 -1 1 0 0 -1 1 0 0 0 -1 0 0 1 1 -1 0 -1 -1 -1 0 -1 1 1 0 0 -1 1 4.519 seconds
For small Moebius numbers, Version 1 outperforms Version 2, but for bigger number the latter is much, MUCH faster.
Ring
mobStr = " . "
for i = 1 to 200
if mobius(i) >= 0
mobStr + = " "
ok
temp = string(mobius(i))
if left(temp,2) = "-0"
temp = right(temp,len(temp)-1)
ok
mobStr += temp + " "
if i % 10 = 9
see mobStr + nl
mobStr = " "
ok
next
func mobius(n)
if n = 1
return 1
ok
for d = 2 to ceil(sqrt(n))
if n % d = 0
if n % (d*d) = 0
return 0
ok
return -mobius(n/d)
ok
next
return -1
Output:
. 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
RPL
RPL does not allow that a function returns something whilst in the middle of a branch, so we have to play here with index saturation and flag use to mimic the short returns that many other languages accept.
RPL code | Comment |
---|---|
≪
IF DUP 1 ≠ THEN → n
≪ -1
2 n √ FOR d
IF n d MOD NOT THEN
1 CF IF n d SQ MOD NOT THEN
n 'd' STO DROP 0 1 SF END
IF 1 FC? THEN
DROP n d / n 'd' STO MU NEG END
END
NEXT
≫ END
≫ 'MU' STO
|
MU ( n -- µ(n) )
if n = 1 then return 1
// default return value put in stack
for d as uinteger = 2 to int(sqr(n))
if n mod d = 0 then
if n mod (d*d) = 0 then
return 0 // and set flag
// if flag not set,
return -mobius(n/d)
end if
next d
|
≪ 1 100 FOR li "" li DUP 19 + FOR j "-0+" j MU 2 + DUP SUB + NEXT 20 STEP ≫ EVAL
- Output:
5: "+--0-+-00+-0-++0-0-0" 4: "++-00+00---0+++0-++0" 3: "---00+-000+0-0+0++-0" 2: "-+00+--0+--0-+00+--0" 1: "0+-0+++0-0+0+++0-000"
Improvement of an implementation found on the MoHPC forum
« CASE DUP 1 ≤ THEN END FACTOR DUP TYPE 9 ≠ THEN DROP -1 END DUP →STR "^" POS THEN DROP 0 END SIZE 1 + 2 / 1 SWAP 2 MOD { NEG } IFT END » 'MU' STO « 1 100 FOR j j 20 MOD 1 == "" IFT "-0+" j MU 2 + DUP SUB + NEXT » 'TASK' STO
Same output.
Ruby
require 'prime'
def μ(n)
pd = n.prime_division
return 0 unless pd.map(&:last).all?(1)
pd.size.even? ? 1 : -1
end
([" "] + (1..199).map{|n|"%2s" % μ(n)}).each_slice(20){|line| puts line.join(" ") }
- Output:
1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Rust
fn moebius(mut x: u64) -> i8 {
let mut prime_count = 0;
// If x is divisible by the given factor this macro counts the factor and divides it out.
// It then returns zero if x is still divisible by the factor.
macro_rules! divide_x_by {
($factor:expr) => {
if x % $factor == 0 {
x /= $factor;
prime_count += 1;
if x % $factor == 0 {
return 0;
}
}
};
}
// Handle 2 and 3 separately,
divide_x_by!(2);
divide_x_by!(3);
// then use a wheel sieve to check the remaining factors <= √x.
for i in (5..=isqrt(x)).step_by(6) {
divide_x_by!(i);
divide_x_by!(i + 2);
}
// There can exist one prime factor larger than √x,
// in that case we can check if x is still larger than one, and then count it.
if x > 1 {
prime_count += 1;
}
if prime_count % 2 == 0 {
1
} else {
-1
}
}
/// Returns the largest integer smaller than or equal to `√n`
const fn isqrt(n: u64) -> u64 {
if n <= 1 {
n
} else {
let mut x0 = u64::pow(2, n.ilog2() / 2 + 1);
let mut x1 = (x0 + n / x0) / 2;
while x1 < x0 {
x0 = x1;
x1 = (x0 + n / x0) / 2;
}
x0
}
}
fn main() {
const ROWS: u64 = 10;
const COLS: u64 = 20;
println!(
"Values of the Möbius function, μ(x), for x between 0 and {}:",
COLS * ROWS
);
for i in 0..ROWS {
for j in 0..=COLS {
let x = COLS * i + j;
let μ = moebius(x);
if μ >= 0 {
// Print an extra space if there's no minus sign in front of the output
// in order to align the numbers in a nice grid.
print!(" ");
}
print!("{μ} ");
}
println!();
}
let x = u64::MAX;
println!("\nμ({x}) = {}", moebius(x));
}
- Output:
Values of the Möbius function, μ(x), for x between 0 and 200: 0 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1 0 μ(18446744073709551615) = -1
Sidef
Built-in:
say moebius(53) #=> -1
say moebius(54) #=> 0
say moebius(55) #=> 1
Simple implementation:
func μ(n) {
var f = n.factor_exp.map { .tail }
f.any { _ > 1 } ? 0 : ((-1)**f.sum)
}
with (199) { |n|
say "Values of the Möbius function for numbers in the range 1..#{n}:"
[' '] + (1..n->map(μ)) -> each_slice(20, {|*line|
say line.map { '%2s' % _ }.join(' ')
})
}
- Output:
Values of the Möbius function for numbers in the range 1..199: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
Wren
import "./fmt" for Fmt
import "./math" for Int
var isSquareFree = Fn.new { |n|
var i = 2
while (i * i <= n) {
if (n%(i*i) == 0) return false
i = (i > 2) ? i + 2 : i + 1
}
return true
}
var mu = Fn.new { |n|
if (n < 1) Fiber.abort("Argument must be a positive integer")
if (n == 1) return 1
var sqFree = isSquareFree.call(n)
var factors = Int.primeFactors(n)
if (sqFree && factors.count % 2 == 0) return 1
if (sqFree) return -1
return 0
}
System.print("The first 199 Möbius numbers are:")
for (i in 0..9) {
for (j in 0..19) {
if (i == 0 && j == 0) {
System.write(" ")
} else {
Fmt.write("$ 3d ", mu.call(i*20 + j))
}
}
System.print()
}
- Output:
The first 199 Möbius numbers are: 1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
XPL0
func Mobius(N);
int N, Cnt, F, K;
[Cnt:= 0;
F:= 2; K:= 0;
repeat if rem(N/F) = 0 then
[Cnt:= Cnt+1;
N:= N/F;
K:= K+1;
if K >= 2 then return 0;
]
else [F:= F+1; K:= 0];
until F > N;
return if Cnt&1 then -1 else 1;
];
int N;
[Format(3, 0);
Text(0, " ");
for N:= 1 to 199 do
[RlOut(0, float(Mobius(N)));
if rem(N/20) = 19 then CrLf(0);
];
]
- Output:
1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
zkl
fcn mobius(n){
pf:=primeFactors(n);
sq:=pf.filter1('wrap(f){ (n % (f*f))==0 }); // False if square free
if(sq==False){ if(pf.len().isEven) 1 else -1 }
else 0
}
fcn primeFactors(n){ // Return a list of prime factors of n
acc:=fcn(n,k,acc,maxD){ // k is 2,3,5,7,9,... not optimum
if(n==1 or k>maxD) acc.close();
else{
q,r:=n.divr(k); // divr-->(quotient,remainder)
if(r==0) return(self.fcn(q,k,acc.write(k),q.toFloat().sqrt()));
return(self.fcn(n,k+1+k.isOdd,acc,maxD)) # both are tail recursion
}
}(n,2,Sink(List),n.toFloat().sqrt());
m:=acc.reduce('*,1); // mulitply factors
if(n!=m) acc.append(n/m); // opps, missed last factor
else acc;
}
[1..199].apply(mobius)
.pump(Console.println, T(Void.Read,19,False),
fcn{ vm.arglist.pump(String,"%3d".fmt) });
- Output:
1 -1 -1 0 -1 1 -1 0 0 1 -1 0 -1 1 1 0 -1 0 -1 0 1 1 -1 0 0 1 0 0 -1 -1 -1 0 1 1 1 0 -1 1 1 0 -1 -1 -1 0 0 1 -1 0 0 0 1 0 -1 0 1 0 1 1 -1 0 -1 1 0 0 1 -1 -1 0 1 -1 -1 0 -1 1 0 0 1 -1 -1 0 0 1 -1 0 1 1 1 0 -1 0 1 0 1 1 1 0 -1 0 0 0 -1 -1 -1 0 -1 1 -1 0 -1 -1 1 0 -1 -1 1 0 0 1 1 0 0 1 1 0 0 0 -1 0 1 -1 -1 0 1 1 0 0 -1 -1 -1 0 1 1 1 0 1 1 0 0 -1 0 -1 0 0 -1 1 0 -1 1 1 0 1 0 -1 0 -1 1 -1 0 0 -1 0 0 -1 -1 0 0 1 1 -1 0 -1 -1 1 0 1 -1 1 0 0 -1 -1 0 -1 1 -1 0 -1 0 -1
- Programming Tasks
- Prime Numbers
- 11l
- ALGOL 68
- Amazing Hopper
- Arturo
- AutoHotkey
- AWK
- BASIC
- Applesoft BASIC
- BASIC256
- Chipmunk Basic
- FreeBASIC
- FutureBasic
- Gambas
- GW-BASIC
- Minimal BASIC
- MSX Basic
- PureBasic
- Tiny BASIC
- XBasic
- Yabasic
- C
- C++
- D
- Delphi
- SysUtils,StdCtrls
- EasyLang
- F Sharp
- Factor
- Fortran
- Go
- Haskell
- J
- Java
- Jq
- Julia
- Kotlin
- Lua
- Mathematica
- Wolfram Language
- Nim
- PARI/GP
- Pascal
- Perl
- Phix
- Python
- Quackery
- Raku
- REXX
- Ring
- RPL
- Ruby
- Rust
- Sidef
- Wren
- Wren-fmt
- Wren-math
- XPL0
- Zkl