Towers of Hanoi: Difference between revisions

From Rosetta Code
Content added Content deleted
Line 2,356: Line 2,356:
<lang rust>
<lang rust>
fn move(n: int, from: int, to: int, via: int) {
fn move(n: int, from: int, to: int, via: int) {
if (n > 0) {
if n > 0 {
move(n - 1, from, via, to);
move(n - 1, from, via, to);
println!("Move disk from pole {:d} to pole {:d}", from, to);
println!("Move disk from pole {:d} to pole {:d}", from, to);

Revision as of 01:48, 28 April 2014

Task
Towers of Hanoi
You are encouraged to solve this task according to the task description, using any language you may know.

In this task, the goal is to solve the Towers of Hanoi problem with recursion.

ActionScript

<lang actionscript>public function move(n:int, from:int, to:int, via:int):void { 

   if (n > 0)
   {
       move(n - 1, from, via, to);
       trace("Move disk from pole " + from + " to pole " + to);
       move(n - 1, via, to, from);
   }

}</lang>

Ada

<lang ada>with Ada.Text_Io; use Ada.Text_Io;

procedure Towers is 

  type Pegs is (Left, Center, Right);
  procedure Hanoi (Ndisks : Natural; Start_Peg : Pegs := Left; End_Peg : Pegs := Right; Via_Peg : Pegs := Center) is
  begin
     if Ndisks > 0 then
        Hanoi(Ndisks - 1, Start_Peg, Via_Peg, End_Peg);
        Put_Line("Move disk" & Natural'Image(Ndisks) & " from " & Pegs'Image(Start_Peg) & " to " & Pegs'Image(End_Peg));
        Hanoi(Ndisks - 1, Via_Peg, End_Peg, Start_Peg);
     end if;
  end Hanoi;

begin 

  Hanoi(4);

end Towers;</lang>

Agena

<lang agena>move := proc(n::number, src::number, dst::number, via::number) is 

  if n > 0 then
     move(n - 1, src, via, dst)
     print(src & ' to ' & dst)
     move(n - 1, via, dst, src)
  fi

end

move(4, 1, 2, 3)</lang>

ALGOL 68

<lang algol68>PROC move = (INT n, from, to, via) VOID: 

 IF n > 0 THEN
   move(n - 1, from, via, to);
   printf(($"Move disk from pole "g" to pole "gl$, from, to));
   move(n - 1, via, to, from)
 FI

main: ( 

 move(4, 1,2,3)

)</lang>

AmigaE

<lang amigae>PROC move(n, from, to, via) 

 IF n > 0
   move(n-1, from, via, to)
   WriteF('Move disk from pole \d to pole \d\n', from, to)
   move(n-1, via, to, from)
 ENDIF

ENDPROC

PROC main() 

 move(4, 1,2,3)

ENDPROC</lang>

AppleScript

<lang applescript>global moves --this is so the handler 'hanoi' can see the 'moves' variable set moves to "" hanoi(4, "peg A", "peg C", "peg B")

on hanoi(ndisks, fromPeg, toPeg, withPeg) 

   if ndisks is greater than 0 then
       hanoi(ndisks - 1, fromPeg, withPeg, toPeg)
       set moves to moves & "Move disk " & ndisks & " from " & fromPeg & " to " & toPeg & return
       hanoi(ndisks - 1, withPeg, toPeg, fromPeg)
   end if
   return moves

end hanoi</lang>

AutoHotkey

<lang AutoHotkey>move(n, from, to, via) ;n = # of disks, from = start pole, to = end pole, via = remaining pole { 

 if (n = 1)
 {
   msgbox , Move disk from pole %from% to pole %to% 
 }
 else
 {
   move(n-1, from, via, to)
   move(1, from, to, via)
   move(n-1, via, to, from)
 }

} move(64, 1, 3, 2)</lang>

AutoIt

<lang AutoIt>Func move($n, $from, $to, $via) If ($n = 1) Then ConsoleWrite(StringFormat("Move disk from pole "&$from&" To pole "&$to&"\n")) Else move($n - 1, $from, $via, $to) move(1, $from, $to, $via) move($n - 1, $via, $to, $from) EndIf EndFunc

move(4, 1,2,3)</lang>

AWK

Translation of: Logo

<lang AWK>$ awk 'func hanoi(n,f,t,v){if(n>0){hanoi(n-1,f,v,t);print(f,"->",t);hanoi(n-1,v,t,f)}} BEGIN{hanoi(4,"left","middle","right")}'</lang>

Output:
left -> right
left -> middle
right -> middle
left -> right
middle -> left
middle -> right
left -> right
left -> middle
right -> middle
right -> left
middle -> left
right -> middle
left -> right
left -> middle
right -> middle

BASIC

Using a Subroutine

Works with: FreeBASIC
Works with: RapidQ

<lang freebasic>SUB move (n AS Integer, fromPeg AS Integer, toPeg AS Integer, viaPeg AS Integer) 

   IF n>0 THEN
       move n-1, fromPeg, viaPeg, toPeg
       PRINT "Move disk from "; fromPeg; " to "; toPeg
       move n-1, viaPeg, toPeg, fromPeg
   END IF

END SUB

move 4,1,2,3</lang>

Using GOSUBs

Here's an example of implementing recursion in an old BASIC that only has global variables:

Works with: Applesoft BASIC
Works with: Commodore BASIC

<lang gwbasic>10 DIM N(1024), F(1024), T(1024), V(1024): REM STACK PER PARAMETER 20 SP = 0: REM STACK POINTER 30 N(SP) = 4: REM START WITH 4 DISCS 40 F(SP) = 1: REM ON PEG 1 50 T(SP) = 2: REM MOVE TO PEG 2 60 V(SP) = 3: REM VIA PEG 3 70 GOSUB 100 80 END 90 REM MOVE SUBROUTINE 100 IF N(SP) = 0 THEN RETURN 110 OS = SP: REMEMBER STACK POINTER 120 SP = SP + 1: REM INCREMENT STACK POINTER 130 N(SP) = N(OS) - 1: REM MOVE N-1 DISCS 140 F(SP) = F(OS)  : REM FROM START PEG 150 T(SP) = V(OS)  : REM TO VIA PEG 160 V(SP) = T(OS)  : REM VIA TO PEG 170 GOSUB 100 180 OS = SP - 1: REM OS WILL HAVE CHANGED 190 PRINT "MOVE DISC FROM"; F(OS); "TO"; T(OS) 200 N(SP) = N(OS) - 1: REM MOVE N-1 DISCS 210 F(SP) = V(OS)  : REM FROM VIA PEG 220 T(SP) = T(OS)  : REM TO DEST PEG 230 V(SP) = F(OS)  : REM VIA FROM PEG 240 GOSUB 100 250 SP = SP - 1  : REM RESTORE STACK POINTER FOR CALLER 260 RETURN</lang>

BASIC256

<lang BASIC256>call move(4,1,2,3) print "Towers of Hanoi puzzle completed!" end

subroutine move (n, fromPeg, toPeg, viaPeg) 

   if n>0 then
       call move(n-1, fromPeg, viaPeg, toPeg)
       print "Move disk from "+fromPeg+" to "+toPeg
       call move(n-1, viaPeg, toPeg, fromPeg)
   end if

end subroutine</lang>

Output:
Move disk from 1 to 3
Move disk from 1 to 2
Move disk from 3 to 2
Move disk from 1 to 3
Move disk from 2 to 1
Move disk from 2 to 3
Move disk from 1 to 3
Move disk from 1 to 2
Move disk from 3 to 2
Move disk from 3 to 1
Move disk from 2 to 1
Move disk from 3 to 2
Move disk from 1 to 3
Move disk from 1 to 2
Move disk from 3 to 2
Towers of Hanoi puzzle completed!

BBC BASIC

Works with: BBC BASIC for Windows

<lang bbcbasic> DIM Disc$(13),Size%(3) 

     FOR disc% = 1 TO 13
       Disc$(disc%) = STRING$(disc%," ")+STR$disc%+STRING$(disc%," ")
       IF disc%>=10 Disc$(disc%) = MID$(Disc$(disc%),2)
       Disc$(disc%) = CHR$17+CHR$(128+disc%-(disc%>7))+Disc$(disc%)+CHR$17+CHR$128
     NEXT disc%
     
     MODE 3
     OFF
     ndiscs% = 13
     FOR n% = ndiscs% TO 1 STEP -1
       PROCput(n%,1)
     NEXT
     INPUT TAB(0,0) "Press Enter to start" dummy$
     PRINT TAB(0,0) SPC(20);
     PROChanoi(ndiscs%,1,2,3)
     VDU 30
     END
     
     DEF PROChanoi(a%,b%,c%,d%)
     IF a%=0 ENDPROC
     PROChanoi(a%-1,b%,d%,c%)
     PROCtake(a%,b%)
     PROCput(a%,c%)
     PROChanoi(a%-1,d%,c%,b%)
     ENDPROC
     
     DEF PROCput(disc%,peg%)
     PRINTTAB(13+26*(peg%-1)-disc%,20-Size%(peg%))Disc$(disc%);
     Size%(peg%) = Size%(peg%)+1
     ENDPROC
     
     DEF PROCtake(disc%,peg%)
     Size%(peg%) = Size%(peg%)-1
     PRINTTAB(13+26*(peg%-1)-disc%,20-Size%(peg%))STRING$(2*disc%+1," ");
     ENDPROC</lang>

Bracmat

<lang bracmat>( ( move 

 =   n from to via
   .   !arg:(?n,?from,?to,?via)
     & (   !n:>0
         & move$(!n+-1,!from,!via,!to)
         & out$("Move disk from pole " !from " to pole " !to)
         & move$(!n+-1,!via,!to,!from)
       | 
       )
 )

& move$(4,1,2,3) );</lang> Output: 

Move disk from pole  1  to pole  3
Move disk from pole  1  to pole  2
Move disk from pole  3  to pole  2
Move disk from pole  1  to pole  3
Move disk from pole  2  to pole  1
Move disk from pole  2  to pole  3
Move disk from pole  1  to pole  3
Move disk from pole  1  to pole  2
Move disk from pole  3  to pole  2
Move disk from pole  3  to pole  1
Move disk from pole  2  to pole  1
Move disk from pole  3  to pole  2
Move disk from pole  1  to pole  3
Move disk from pole  1  to pole  2
Move disk from pole  3  to pole  2

C

<lang c>#include <stdio.h>

void move(int n, int from, int to, int via) { 

 if (n > 0) {
   move(n - 1, from, via, to);
   printf("Move disk from pole %d to pole %d\n", from, to);
   move(n - 1, via, to, from);
 }

} int main() { 

 move(4, 1,2,3);
 return 0;

}</lang>

Animate it for fun:<lang c>#include <stdio.h>

  1. include <stdlib.h>
  2. include <unistd.h>

typedef struct { int *x, n; } tower; tower *new_tower(int cap) { tower *t = calloc(1, sizeof(tower) + sizeof(int) * cap); t->x = (int*)(t + 1); return t; }

tower *t[3]; int height;

void text(int y, int i, int d, const char *s) { printf("\033[%d;%dH", height - y + 1, (height + 1) * (2 * i + 1) - d); while (d--) printf("%s", s); }

void add_disk(int i, int d) { t[i]->x[t[i]->n++] = d; text(t[i]->n, i, d, "==");

usleep(100000); fflush(stdout); }

int remove_disk(int i) { int d = t[i]->x[--t[i]->n]; text(t[i]->n + 1, i, d, " "); return d; }

void move(int n, int from, int to, int via) { if (!n) return;

move(n - 1, from, via, to); add_disk(to, remove_disk(from)); move(n - 1, via, to, from); }

int main(int c, char *v[]) { puts("\033[H\033[J");

if (c <= 1 || (height = atoi(v[1])) <= 0) height = 8; for (c = 0; c < 3; c++) t[c] = new_tower(height); for (c = height; c; c--) add_disk(0, c);

move(height, 0, 2, 1);

text(1, 0, 1, "\n"); return 0; }</lang>

C#

<lang csharp>public void move(int n, int from, int to, int via) { 

  if (n == 1) {
    System.Console.WriteLine("Move disk from pole " + from + " to pole " + to);
  } else {
    move(n - 1, from, via, to);
    move(1, from, to, via);
    move(n - 1, via, to, from);
  }
}</lang>

C++

Works with: g++

<lang cpp>void move(int n, int from, int to, int via) { 

 if (n == 1) {
   std::cout << "Move disk from pole " << from << " to pole " << to << std::endl;
 } else {
   move(n - 1, from, via, to);
   move(1, from, to, via);
   move(n - 1, via, to, from);
 }

}</lang>

Clojure

<lang lisp>(defn towers-of-hanoi [n from to via] 

 (if (= n 1)
   (println (format "Move from %s to %s" from to))
   (do
     (towers-of-hanoi (dec n) from via to)
     (println (format "Move from %s to %s" from to))
     (recur (dec n) via to from))))</lang>

COBOL

Translation of: C
Works with: OpenCOBOL version 2.0

<lang cobol> >>SOURCE FREE IDENTIFICATION DIVISION. PROGRAM-ID. towers-of-hanoi.

PROCEDURE DIVISION. 

   CALL "move-disk" USING 4, 1, 2, 3
   .

END PROGRAM towers-of-hanoi.

IDENTIFICATION DIVISION. PROGRAM-ID. move-disk RECURSIVE.

DATA DIVISION. LINKAGE SECTION. 01 n PIC 9 USAGE COMP. 01 from-pole PIC 9 USAGE COMP. 01 to-pole PIC 9 USAGE COMP. 01 via-pole PIC 9 USAGE COMP.

PROCEDURE DIVISION USING n, from-pole, to-pole, via-pole. 

   IF n > 0
      SUBTRACT 1 FROM n
      CALL "move-disk" USING CONTENT n, from-pole, via-pole, to-pole
      DISPLAY "Move disk from pole " from-pole " to pole " to-pole
      CALL "move-disk" USING CONTENT n, via-pole, to-pole, from-pole
   END-IF
   .

END PROGRAM move-disk.</lang>

CoffeeScript

<lang coffeescript>hanoi = (ndisks, start_peg=1, end_peg=3) -> 

 if ndisks
   staging_peg = 1 + 2 + 3 - start_peg - end_peg
   hanoi(ndisks-1, start_peg, staging_peg)
   console.log "Move disk #{ndisks} from peg #{start_peg} to #{end_peg}"
   hanoi(ndisks-1, staging_peg, end_peg)

hanoi(4)</lang>

Common Lisp

<lang lisp>(defun move (n from to via) 

 (cond ((= n 1)
        (format t "Move from ~A to ~A.~%" from to))
       (t
        (move (- n 1) from via to)
        (format t "Move from ~A to ~A.~%" from to)
        (move (- n 1) via to from))))</lang>

D

Recursive Version

<lang d>import std.stdio;

void hanoi(in int n, in char from, in char to, in char via) { 

   if (n > 0) {
       hanoi(n - 1, from, via, to);
       writefln("Move disk %d from %s to %s", n, from, to);
       hanoi(n - 1, via, to, from);
   }

}

void main() { 

   hanoi(3, 'L', 'M', 'R');

}</lang>

Output:
Move disk 1 from L to M
Move disk 2 from L to R
Move disk 1 from M to R
Move disk 3 from L to M
Move disk 1 from R to L
Move disk 2 from R to M
Move disk 1 from L to M

Fast Iterative Version

See: The shortest and "mysterious" TH algorithm <lang d>// Code found and then improved by Glenn C. Rhoads, // then some more by M. Kolar (2000). void main(in string[] args) { 

   import core.stdc.stdio, std.conv, std.typetuple;

   immutable size_t n = (args.length > 1) ? args[1].to!size_t : 3;
   size_t[3] p = [(1 << n) - 1, 0, 0];

   // Show the start configuration of the pegs.
   '|'.putchar;
   foreach_reverse (immutable i; 1 .. n + 1)
       printf(" %d", i);
   "\n|\n|".puts;

   foreach (immutable size_t x; 1 .. (1 << n)) {
       {
           immutable size_t i1 = x & (x - 1);
           immutable size_t fr = (i1 + i1 / 3) & 3;
           immutable size_t i2 = (x | (x - 1)) + 1;
           immutable size_t to = (i2 + i2 / 3) & 3;

           size_t j = 1;
           for (size_t w = x; !(w & 1); w >>= 1, j <<= 1) {}

           // Now j is not the number of the disk to move,
           // it contains the single bit to be moved:
           p[fr] &= ~j;
           p[to] |= j;
       }

       // Show the current configuration of pegs.
       foreach (immutable size_t k; TypeTuple!(0, 1, 2)) {
           "\n|".printf;
           size_t j = 1 << n;
           foreach_reverse (immutable size_t w; 1 .. n + 1) {
               j >>= 1;
               if (j & p[k])
                   printf(" %zd", w);
           }
       }
       '\n'.putchar;
   }

}</lang>

Output:
| 3 2 1
|
|

| 3 2
|
| 1

| 3
| 2
| 1

| 3
| 2 1
|

|
| 2 1
| 3

| 1
| 2
| 3

| 1
|
| 3 2

|
|
| 3 2 1

Dart

<lang dart>main() { 

 moveit(from,to) {
   print("move ${from} ---> ${to}");
 }

 hanoi(height,toPole,fromPole,usePole) {
   if (height>0) {
     hanoi(height-1,usePole,fromPole,toPole);  
     moveit(fromPole,toPole);
     hanoi(height-1,toPole,usePole,fromPole);
   }
 }

 hanoi(3,3,1,2);

}</lang>

The same as above, with optional static type annotations and styled according to http://www.dartlang.org/articles/style-guide/ <lang dart>main() { 

 String say(String from, String to) => "$from ---> $to"; 

 hanoi(int height, int toPole, int fromPole, int usePole) {
   if (height > 0) {
     hanoi(height - 1, usePole, fromPole, toPole);  
     print(say(fromPole.toString(), toPole.toString()));
     hanoi(height - 1, toPole, usePole, fromPole);
   }
 }

 hanoi(3, 3, 1, 2);

}</lang>

Output:
move 1 ---> 3
move 1 ---> 2
move 3 ---> 2
move 1 ---> 3
move 2 ---> 1
move 2 ---> 3
move 1 ---> 3

Dc

From Here 

 [ # move(from, to)
    n           # print from
    [ --> ]n    # print " --> "
    p           # print to\n
    sw          # p doesn't pop, so get rid of the value
 ]sm
 
 [ # init(n)
    sw          # tuck n away temporarily
    9           # sentinel as bottom of stack
    lw          # bring n back
    1           # "from" tower's label
    3           # "to" tower's label
    0           # processed marker
 ]si
 
 [ # Move()
    lt          # push to
    lf          # push from
    lmx         # call move(from, to)
 ]sM
 
 [ # code block <d>
    ln          # push n
    lf          # push from
    lt          # push to
    1           # push processed marker 1
    ln          # push n
    1           # push 1
    -           # n - 1
    lf          # push from
    ll          # push left
    0           # push processed marker 0
 ]sd
 
 [ # code block <e>
    ln          # push n
    1           # push 1
    -           # n - 1
    ll          # push left
    lt          # push to
    0           # push processed marker 0
 ]se
 
 [ # code block <x>
    ln 1 =M
    ln 1 !=d
 ]sx
 
 [ # code block <y>
    lMx
    lex
 ]sy
 
 [ # quit()
    q           # exit the program
 ]sq
 
 [ # run()
    d 9 =q      # if stack empty, quit()
    sp          # processed
    st          # to
    sf          # from
    sn          # n
    6           #
    lf          #
    -           #
    lt          #
    -           # 6 - from - to
    sl          #
    lp 0 =x     #
    lp 0 !=y    #
    lrx         # loop
 ]sr
 
 5lix # init(n)
 lrx # run()

E

<lang e>def move(out, n, fromPeg, toPeg, viaPeg) { 

   if (n.aboveZero()) {
       move(out, n.previous(), fromPeg, viaPeg, toPeg)
       out.println(`Move disk $n from $fromPeg to $toPeg.`)
       move(out, n.previous(), viaPeg, toPeg, fromPeg)
   }

}

move(stdout, 4, def left {}, def right {}, def middle {})</lang>

Emacs Lisp

Translation of: Common Lisp

<lang lisp> (defun move (n from to via) 

 (cond ((= n 1)
        (print (format "Move from %S to %S" from to)))
       (t

(progn (move (- n 1) from via to) (print (format "Move from %S to %S" from to)) (move (- n 1) via to from))))) </lang>

Erlang

<lang erlang>move(1, F, T, _V) -> 

 io:format("Move from ~p to ~p~n", [F, T]);

move(N, F, T, V) -> 

 move(N-1, F, V, T), 
 move(1  , F, T, V),
 move(N-1, V, T, F).</lang>

Euphoria

<lang euphoria>procedure move(integer n, sequence From, sequence To, sequence Via) 

   if n>0 then
       move(n-1, From, Via, To)
       printf(1, "Move disk %d from the %s pole to the %s pole\n", {n, From, To})
       move(n-1, Via, To, From)
   end if

end procedure

move(3, "left", "right", "middle")</lang>

Output:
Move disk 1 from the left pole to the right pole
Move disk 2 from the left pole to the middle pole
Move disk 1 from the right pole to the middle pole
Move disk 3 from the left pole to the right pole
Move disk 1 from the middle pole to the left pole
Move disk 2 from the middle pole to the right pole
Move disk 1 from the left pole to the right pole

Ezhil

<lang Python>

  1. (C) 2013 Ezhil Language Project
  2. Tower of Hanoi – recursive solution

நிரல்பாகம் ஹோனாய்(வட்டுகள், முதல்அச்சு, இறுதிஅச்சு,வட்டு) 

 @(வட்டுகள் == 1 ) ஆனால்
    பதிப்பி  “வட்டு ” + str(வட்டு) + “ஐ \t  (” + str(முதல்அச்சு) + “  —> ” +  str(இறுதிஅச்சு)+ “) அச்சிற்கு நகர்த்துக.”
 இல்லை

 @( ["இ", "அ",  "ஆ"]  இல் அச்சு ) ஒவ்வொன்றாக
         @( (முதல்அச்சு != அச்சு)  && (இறுதிஅச்சு  != அச்சு) ) ஆனால்
             நடு = அச்சு
         முடி
 முடி

   # solve problem for n-1 again between src and temp pegs                      
   ஹோனாய்(வட்டுகள்-1,   முதல்அச்சு,நடு,வட்டுகள்-1)

   # move largest disk from src to destination
   ஹோனாய்(1, முதல்அச்சு, இறுதிஅச்சு,வட்டுகள்)

   # solve problem for n-1 again between different pegs
   ஹோனாய்(வட்டுகள்-1, நடு, இறுதிஅச்சு,வட்டுகள்-1)
 முடி

முடி

ஹோனாய்(4,”அ”,”ஆ”,0) </lang>

F#

<lang fsharp>#light let rec hanoi num start finish = 

 match num with
 | 0 -> [ ]
 | _ -> let temp = (6 - start - finish)
        (hanoi (num-1) start temp) @ [ start, finish ] @ (hanoi (num-1) temp finish)

[<EntryPoint>] let main args = 

 (hanoi 4 1 2) |> List.iter (fun pair -> match pair with
                                         | a, b -> printf "Move disc from %A to %A\n" a b)
 0</lang>

FALSE

<lang false>["Move disk from "$!\" to "$!\" "]p: { to from } [n;0>[n;1-n: @\ h;! @\ p;! \@ h;! \@ n;1+n:]?]h: { via to from } 4n:["right"]["middle"]["left"]h;!%%%</lang>

Factor

<lang factor>USING: formatting kernel locals math ; IN: rosettacode.hanoi

move ( from to -- )
   "%d->%d\n" printf ;
hanoi ( n from to other -- )
   n 0 > [
       n 1 - from other to hanoi
       from to move
       n 1 - other to from hanoi
   ] when ;</lang>

In the REPL: 

( scratchpad ) 3 1 3 2 hanoi
1->3
1->2
3->2
1->3
2->1
2->3
1->3

Forth

With locals: <lang forth>CREATE peg1 ," left " CREATE peg2 ," middle " CREATE peg3 ," right "

.$ COUNT TYPE ;
MOVE-DISK
 LOCALS| via to from n | 
 n 1 =
 IF   CR ." Move disk from " from .$ ." to " to .$ 
 ELSE n 1- from via to RECURSE 
      1    from to via RECURSE 
      n 1- via to from RECURSE 
 THEN ;</lang>

Without locals, executable pegs: <lang forth>: left ." left" ;

right ." right" ;
middle ." middle" ;
move-disk ( v t f n -- v t f )
 dup 0= if drop exit then
 1-       >R
 rot swap R@ ( t v f n-1 ) recurse
 rot swap
 2dup cr ." Move disk from " execute ."  to " execute
 swap rot R> ( f t v n-1 ) recurse
 swap rot ;
hanoi ( n -- )
 1 max >R ['] right ['] middle ['] left R> move-disk drop drop drop ;</lang>

Fortran

Works with: Fortran version 90 and later

<lang fortran>PROGRAM TOWER 

 CALL Move(4, 1, 2, 3)

CONTAINS 

 RECURSIVE SUBROUTINE Move(ndisks, from, to, via)
   INTEGER, INTENT (IN) :: ndisks, from, to, via
  
   IF (ndisks == 1) THEN
      WRITE(*, "(A,I1,A,I1)") "Move disk from pole ", from, " to pole ", to
   ELSE
      CALL Move(ndisks-1, from, via, to)
      CALL Move(1, from, to, via)
      CALL Move(ndisks-1, via, to, from)
   END IF
 END SUBROUTINE Move

END PROGRAM TOWER</lang>

GAP

<lang gap>Hanoi := function(n) local move; move := function(n, a, b, c) # from, through, to if n = 1 then Print(a, " -> ", c, "\n"); else move(n - 1, a, c, b); move(1, a, b, c); move(n - 1, b, a, c); fi; end; move(n, "A", "B", "C"); end;

Hanoi(1);

  1. A -> C

Hanoi(2);

  1. A -> B
  2. A -> C
  3. B -> C

Hanoi(3);

  1. A -> C
  2. A -> B
  3. C -> B
  4. A -> C
  5. B -> A
  6. B -> C
  7. A -> C</lang>

Go

<lang go>package main

import "fmt"

// a towers of hanoi solver just has one method, play type solver interface { 

   play(int)

}

func main() { 

   var t solver    // declare variable of solver type
   t = new(towers) // type towers must satisfy solver interface
   t.play(4)

}

// towers is example of type satisfying solver interface type towers struct { 

   // an empty struct.  some other solver might fill this with some
   // data representation, maybe for algorithm validation, or maybe for
   // visualization.

}

// play is sole method required to implement solver type func (t *towers) play(n int) { 

   // drive recursive solution, per task description
   t.moveN(n, 1, 2, 3)

}

// recursive algorithm func (t *towers) moveN(n, from, to, via int) { 

   if n > 0 {
       t.moveN(n-1, from, via, to)
       t.move1(from, to)
       t.moveN(n-1, via, to, from)
   }

}

// example function prints actions to screen. // enhance with validation or visualization as needed. func (t *towers) move1(from, to int) { 

   fmt.Println("move disk from rod", from, "to rod", to)

}</lang>

In other words:

<lang go>package main

import "fmt"

func main() { move(3, "A", "B", "C") }

func move(n uint64, a, b, c string) { if n > 0 { move(n-1, a, c, b) fmt.Println("Move disk from " + a + " to " + c) move(n-1, b, a, c) } }</lang>

Groovy

Unlike most solutions here this solution manipulates more-or-less actual stacks of more-or-less actual rings. <lang groovy>def tail = { list, n -> def m = list.size(); list[([m - n, 0].max())..<m] }

final STACK = [A:[],B:[],C:[]].asImmutable()

def report = { it -> } def check = { it -> }

def moveRing = { from, to -> to << from.pop(); report(); check(to) }

def moveStack moveStack = { from, to, using = STACK.values().find { !(it.is(from) || it.is(to)) } -> 

   if (!from) return
   def n = from.size()
   moveStack(tail(from, n-1), using, to)
   moveRing(from, to)
   moveStack(tail(using, n-1), to, from)

}</lang> Test program: <lang groovy>enum Ring { 

   S('°'), M('o'), L('O'), XL('( )');
   private sym
   private Ring(sym) { this.sym=sym }
   String toString() { sym }

}

report = { STACK.each { k, v -> println "${k}: ${v}" }; println() } check = { to -> assert to == ([] + to).sort().reverse() }

Ring.values().reverseEach { STACK.A << it } report() check(STACK.A) moveStack(STACK.A, STACK.C)</lang>

Output: 

A: [( ), O, o, °]
B: []
C: []

A: [( ), O, o]
B: [°]
C: []

A: [( ), O]
B: [°]
C: [o]

A: [( ), O]
B: []
C: [o, °]

A: [( )]
B: [O]
C: [o, °]

A: [( ), °]
B: [O]
C: [o]

A: [( ), °]
B: [O, o]
C: []

A: [( )]
B: [O, o, °]
C: []

A: []
B: [O, o, °]
C: [( )]

A: []
B: [O, o]
C: [( ), °]

A: [o]
B: [O]
C: [( ), °]

A: [o, °]
B: [O]
C: [( )]

A: [o, °]
B: []
C: [( ), O]

A: [o]
B: [°]
C: [( ), O]

A: []
B: [°]
C: [( ), O, o]

A: []
B: []
C: [( ), O, o, °]

Haskell

Most of the programs on this page use an imperative approach (i.e., print out movements as side effects during program execution). Haskell favors a purely functional approach, where you would for example return a (lazy) list of movements from a to b via c: <lang haskell>hanoi :: Integer -> a -> a -> a -> [(a, a)] hanoi 0 _ _ _ = [] hanoi n a b c = hanoi (n-1) a c b ++ [(a,b)] ++ hanoi (n-1) c b a</lang> One can use this function to produce output, just like the other programs: <lang haskell>hanoiIO n = mapM_ f $ hanoi n 1 2 3 where 

 f (x,y) = putStrLn $ "Move " ++ show x ++ " to " ++ show y</lang>

Or, instead one can of course also program imperatively, using the IO monad directly: <lang haskell>hanoiM :: Integer -> IO () hanoiM n = hanoiM' n 1 2 3 where 

 hanoiM' 0 _ _ _ = return ()
 hanoiM' n a b c = do
   hanoiM' (n-1) a c b
   putStrLn $ "Move " ++ show a ++ " to " ++ show b
   hanoiM' (n-1) c b a</lang>

Icon and Unicon

The following is based on a solution in the Unicon book. <lang Icon>procedure main(arglist) hanoi(arglist[1]) | stop("Usage: hanoi n\n\rWhere n is the number of disks to move.") end

  1. procedure hanoi(n:integer, needle1:1, needle2:2) # unicon shorthand for icon code 1,2,3 below

procedure hanoi(n, needle1, needle2) #: solve towers of hanoi by moving n disks from needle 1 to needle2 via other local other

n := integer(0 < n) | runerr(n,101) # 1 ensure integer (this also ensures it's positive too) /needle1 := 1 # 2 default /needle2 := 2 # 3 default

if n = 1 then 

  write("Move disk from ", needle1, " to ", needle2)

else { 

  other := 6 - needle1 - needle2         # clever but somewhat un-iconish way to find other
  hanoi(n-1, needle1, other)             
  write("Move disk from ", needle1, " to ", needle2)
  hanoi(n-1, other, needle2)

} return end</lang>

Inform 7

<lang inform7>Hanoi is a room.

A disk is a kind of supporter.

A post is a kind of supporter. A post is always fixed in place.

The left post, the middle post, and the right post are posts in Hanoi.

A disk is a kind of supporter. The red disk is a disk on the left post. The orange disk is a disk on the red disk. The yellow disk is a disk on the orange disk. The green disk is a disk on the yellow disk.

Definition: a disk is topmost if nothing is on it.

When play begins: move 4 disks from the left post to the right post via the middle post.

To move (N - number) disk/disks from (FP - post) to (TP - post) via (VP - post): if N > 0: move N - 1 disks from FP to VP via TP; say "Moving a disk from [FP] to [TP]..."; let D be a random topmost disk enclosed by FP; if a topmost disk (called TD) is enclosed by TP, now D is on TD; otherwise now D is on TP; move N - 1 disks from VP to TP via FP.</lang>

Io

<lang io>hanoi := method(n, from, to, via, 

 if (n == 1) then (
   writeln("Move from ", from, " to ", to)
 ) else (
   hanoi(n - 1, from, via, to  )
   hanoi(1    , from, to , via )
   hanoi(n - 1, via , to , from)
 )

)</lang>

Ioke

<lang ioke> = method(n, f, u, t, 

 if(n < 2,
   "#{f} --> #{t}" println,

   H(n - 1, f, t, u)
   "#{f} --> #{t}" println
   H(n - 1, u, f, t)
 )

)

hanoi = method(n, 

 H(n, 1, 2, 3)

)</lang>

J

Solutions <lang j>H =: i.@,&2 ` (({&0 2 1,0 2,{&1 0 2)@$:@<:) @. * NB. tacit using anonymous recursion</lang>

Example use:

<lang j> H 3 0 2 0 1 2 1 0 2 1 2 1 0 2 0</lang> The result is a 2-column table; a row i,j is interpreted as: move a disk (the top disk) from peg i to peg j . Or, using explicit rather than implicit code: <lang j>H1=: monad define NB. explicit equivalent of H 

 if. y do.
   ({&0 2 1 , 0 2 , {&1 0 2) H1 y-1
 else.
   i.0 2
 end.

)</lang> The usage here is the same: 

   H1 2
0 1
0 2
1 2
Alternative solution

If a textual display is desired, similar to some of the other solutions here (counting from 1 instead of 0, tracking which disk is on the top of the stack, and of course formatting the result for a human reader instead of providing a numeric result): <lang J>hanoi=: monad define 

 moves=. H y
 disks=.  $~` ((],[,]) $:@<:) @.* y
 ('move disk ';' from peg ';' to peg ');@,."1 ":&.>disks,.1+moves

)</lang>

Demonstration:

<lang J> hanoi 3 move disk 1 from peg 1 to peg 3 move disk 2 from peg 1 to peg 2 move disk 1 from peg 3 to peg 2 move disk 3 from peg 1 to peg 3 move disk 1 from peg 2 to peg 1 move disk 2 from peg 2 to peg 3 move disk 1 from peg 1 to peg 3</lang>

Java

<lang java>public void move(int n, int from, int to, int via) { 

 if (n == 1) {
   System.out.println("Move disk from pole " + from + " to pole " + to);
 } else {
   move(n - 1, from, via, to);
   move(1, from, to, via);
   move(n - 1, via, to, from);
 }

}</lang>

JavaScript

<lang javascript>function move(n, a, b, c) { if (n > 0) { move(n-1, a, c, b); console.log("Move disk from " + a + " to " + c); move(n-1, b, a, c); } } move(4, "A", "B", "C");</lang>

Joy

From here <lang joy>DEFINE hanoi == [[rolldown] infra] dip 

               [ [ [null] [pop pop] ] 
                 [ [dup2 [[rotate] infra] dip pred] 
                   [ [dup rest put] dip 
                     [[swap] infra] dip pred ] 
                   [] ] ] 
               condnestrec.</lang>

Using it (5 is the number of disks.) <lang joy>[source destination temp] 5 hanoi.</lang>

K

<lang K> h:{[n;a;b;c]if[n>0;_f[n-1;a;c;b];`0:,//$($n,":",$a,"->",$b,"\n");_f[n-1;c;b;a]]} 

  h[4;1;2;3]

1:1->3 2:1->2 1:3->2 3:1->3 1:2->1 2:2->3 1:1->3 4:1->2 1:3->2 2:3->1 1:2->1 3:3->2 1:1->3 2:1->2 1:3->2</lang> The disk to move in the i'th step is the same as the position of the leftmost 1 in the binary representation of 1..2^n. <lang K> s:();{[n;a;b;c]if[n>0;_f[n-1;a;c;b];s,:n;_f[n-1;c;b;a]]}[4;1;2;3];s 1 2 1 3 1 2 1 4 1 2 1 3 1 2 1 

  1_{*1+&|x}'a:(2_vs!_2^4)

1 2 1 3 1 2 1 4 1 2 1 3 1 2 1</lang>


Lasso

<lang Lasso>#!/usr/bin/lasso9

define towermove( disks::integer, a,b,c ) => { if(#disks > 0) => { towermove(#disks - 1, #a, #c, #b ) stdoutnl("Move disk from " + #a + " to " + #c) towermove(#disks - 1, #b, #a, #c ) } }

towermove((integer($argv -> second || 3)), "A", "B", "C")</lang> Called from command line: <lang Lasso>./towers</lang> Output: 

Move disk from A to C
Move disk from A to B
Move disk from C to B
Move disk from A to C
Move disk from B to A
Move disk from B to C
Move disk from A to C

Called from command line: <lang Lasso>./towers 4</lang> Output: 

Move disk from A to B
Move disk from A to C
Move disk from B to C
Move disk from A to B
Move disk from C to A
Move disk from C to B
Move disk from A to B
Move disk from A to C
Move disk from B to C
Move disk from B to A
Move disk from C to A
Move disk from B to C
Move disk from A to B
Move disk from A to C
Move disk from B to C

Liberty BASIC

This looks much better with a GUI interface. <lang lb> source$ ="A" 

   via$    ="B"
   target$ ="C"

   call hanoi 4, source$, target$, via$        '   ie call procedure to move legally 4 disks from peg A to peg C via peg B

   wait

   sub hanoi numDisks, source$, target$, via$
       if numDisks =0 then
           exit sub
       else
           call hanoi numDisks -1, source$, via$, target$
           print " Move disk "; numDisks; " from peg "; source$; " to peg "; target$
           call hanoi numDisks -1, via$, target$, source$
       end if
   end sub

   end</lang>

<lang logo>to move :n :from :to :via 

 if :n = 0 [stop]
 move :n-1 :from :via :to
 (print [Move disk from] :from [to] :to)
 move :n-1 :via :to :from

end move 4 "left "middle "right</lang>

Logtalk

<lang logtalk>:- object(hanoi). 

   :- public(run/1).
   :- mode(run(+integer), one).
   :- info(run/1, [
       comment is 'Solves the towers of Hanoi problem for the specified number of disks.',
       argnames is ['Disks']]).

   run(Disks) :-
       move(Disks, left, middle, right).

   move(1, Left, _, Right):-
       !,
       report(Left, Right).
   move(Disks, Left, Aux, Right):-
       Disks2 is Disks - 1,
       move(Disks2, Left, Right, Aux),
       report(Left, Right),
       move(Disks2, Aux, Left, Right).

   report(Pole1, Pole2):-
       write('Move a disk from '),
       writeq(Pole1),
       write(' to '),
       writeq(Pole2),
       write('.'),
       nl.
- end_object.</lang>

Lua

<lang Lua>function move(n, src, dst, via) 

   if n > 0 then
       move(n - 1, src, via, dst)
       print(src, 'to', dst)
       move(n - 1, via, dst, src)
   end

end

move(4, 1, 2, 3)</lang>

Mathematica

<lang mathematica>Hanoi[0, from_, to_, via_] := Null Hanoi[n_Integer, from_, to_, via_] := 

 (Hanoi[n-1, from, via, to];
  Print["Move disk from pole ", from, " to ", to, "."];
  Hanoi[n-1, via, from, to])</lang>

MATLAB

This is a direct translation from the Python example given in the Wikipedia entry for the Tower of Hanoi puzzle. <lang MATLAB>function towerOfHanoi(n,A,C,B) 

   if (n~=0)
       towerOfHanoi(n-1,A,B,C);
       disp(sprintf('Move plate %d from tower %d to tower %d',[n A C]));
       towerOfHanoi(n-1,B,C,A);
   end

end</lang>

Sample output:

<lang MATLAB>towerOfHanoi(3,1,3,2) Move plate 1 from tower 1 to tower 3 Move plate 2 from tower 1 to tower 2 Move plate 1 from tower 3 to tower 2 Move plate 3 from tower 1 to tower 3 Move plate 1 from tower 2 to tower 1 Move plate 2 from tower 2 to tower 3 Move plate 1 from tower 1 to tower 3</lang>

МК-61/52

<lang>^ 2 x^y П0 <-> 2 / {x} x#0 16 3 П3 2 П2 БП 20 3 П2 2 П3 1 П1 ПП 25 КППB ПП 28 КППA ПП 31 КППB ПП 34 КППA ИП1 ИП3 КППC ИП1 ИП2 КППC ИП3 ИП2 КППC ИП1 ИП3 КППC ИП2 ИП1 КППC ИП2 ИП3 КППC ИП1 ИП3 КППC В/О ИП1 ИП2 БП 62 ИП2 ИП1 КППC ИП1 ИП2 ИП3 П1 -> П3 -> П2 В/О 1 0 / + С/П КИП0 ИП0 x=0 89 3 3 1 ИНВ ^ ВП 2 С/П В/О</lang>

Instruction: РA = 56; РB = 60; РC = 72; N В/О С/П, where 2 <= N <= 7.

Modula-3

<lang modula3>MODULE Hanoi EXPORTS Main;

FROM IO IMPORT Put; FROM Fmt IMPORT Int;

PROCEDURE doHanoi(n, from, to, using: INTEGER) = 

 BEGIN
   IF n > 0 THEN
     doHanoi(n - 1, from, using, to);
     Put("move " & Int(from) & " --> " & Int(to) & "\n");
     doHanoi(n - 1, using, to, from);
   END;
 END doHanoi;

BEGIN 

 doHanoi(4, 1, 2, 3);

END Hanoi.</lang>

Nemerle

<lang Nemerle>using System; using System.Console;

module Towers { 

   Hanoi(n : int, from = 1, to = 3, via = 2) : void
   {
       when (n > 0)
       {
           Hanoi(n - 1, from, via, to);
           WriteLine("Move disk from peg {0} to peg {1}", from, to);
           Hanoi(n - 1, via, to, from);
       }
   }
   
   Main() : void
   {
       Hanoi(4)
   }

}</lang>

NetRexx

<lang NetRexx>/* NetRexx */ options replace format comments java crossref symbols binary

runSample(arg) return

-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ method runSample(arg) private static 

 parse arg discs .
 if discs = , discs < 1 then discs = 4
 say 'Minimum moves to solution:' 2 ** discs - 1
 moves = move(discs)
 say 'Solved in' moves 'moves.'
 return

-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ method move(discs = int 4, towerFrom = int 1, towerTo = int 2, towerVia = int 3, moves = int 0) public static 

 if discs == 1 then do
   moves = moves + 1
   say 'Move disc from peg' towerFrom 'to peg' towerTo '- Move No:' Rexx(moves).right(5)
   end
 else do
   moves = move(discs - 1, towerFrom, towerVia, towerTo, moves)
   moves = move(1, towerFrom, towerTo, towerVia, moves)
   moves = move(discs - 1, towerVia, towerTo, towerFrom, moves)
   end
 return moves

</lang>

Output:
Minimum moves to solution: 15
Move disc from peg 1 to peg 3 - Move No:     1
Move disc from peg 1 to peg 2 - Move No:     2
Move disc from peg 3 to peg 2 - Move No:     3
Move disc from peg 1 to peg 3 - Move No:     4
Move disc from peg 2 to peg 1 - Move No:     5
Move disc from peg 2 to peg 3 - Move No:     6
Move disc from peg 1 to peg 3 - Move No:     7
Move disc from peg 1 to peg 2 - Move No:     8
Move disc from peg 3 to peg 2 - Move No:     9
Move disc from peg 3 to peg 1 - Move No:    10
Move disc from peg 2 to peg 1 - Move No:    11
Move disc from peg 3 to peg 2 - Move No:    12
Move disc from peg 1 to peg 3 - Move No:    13
Move disc from peg 1 to peg 2 - Move No:    14
Move disc from peg 3 to peg 2 - Move No:    15
Solved in 15 moves.

NewLISP

<lang lisp>(define (move n from to via) (if (> n 0) (move (- n 1) from via to (print "move disk from pole " from " to pole " to "\n") (move (- n 1) via to from))))

(move 4 1 2 3)</lang>

Nimrod

<lang Python>proc hanoi(disks: int, fromTower: string, toTower: string, viaTower: string) = 

 if disks != 0:
   hanoi(disks - 1, fromTower, viaTower, toTower)
   echo("Move disk ", disks, " from ", fromTower, " to ", toTower)
   hanoi(disks - 1, viaTower, toTower, fromTower)

hanoi(4, "1", "2", "3")</lang>

Output:
Move disk 1 from 1 to 3
Move disk 2 from 1 to 2
Move disk 1 from 3 to 2
Move disk 3 from 1 to 3
Move disk 1 from 2 to 1
Move disk 2 from 2 to 3
Move disk 1 from 1 to 3
Move disk 4 from 1 to 2
Move disk 1 from 3 to 2
Move disk 2 from 3 to 1
Move disk 1 from 2 to 1
Move disk 3 from 3 to 2
Move disk 1 from 1 to 3
Move disk 2 from 1 to 2
Move disk 1 from 3 to 2

Objective-C

From here

Works with: GNUstep

It should be compatible with XCode/Cocoa on MacOS too.

The Interface - TowersOfHanoi.h: <lang objc>#import <Foundation/NSObject.h>

@interface TowersOfHanoi: NSObject { int pegFrom; int pegTo; int pegVia; int numDisks; }

-(void) setPegFrom: (int) from andSetPegTo: (int) to andSetPegVia: (int) via andSetNumDisks: (int) disks; -(void) movePegFrom: (int) from andMovePegTo: (int) to andMovePegVia: (int) via andWithNumDisks: (int) disks; @end</lang> The Implementation - TowersOfHanoi.m: <lang objc>#import "TowersOfHanoi.h" @implementation TowersOfHanoi

-(void) setPegFrom: (int) from andSetPegTo: (int) to andSetPegVia: (int) via andSetNumDisks: (int) disks { pegFrom = from; pegTo = to; pegVia = via; numDisks = disks; }

-(void) movePegFrom: (int) from andMovePegTo: (int) to andMovePegVia: (int) via andWithNumDisks: (int) disks { if (disks == 1) { 

           printf("Move disk from pole %i to pole %i\n", from, to);
       } else {
			[self movePegFrom: from andMovePegTo: via andMovePegVia: to andWithNumDisks: disks-1];

[self movePegFrom: from andMovePegTo: to andMovePegVia: via andWithNumDisks: 1]; [self movePegFrom: via andMovePegTo: to andMovePegVia: from andWithNumDisks: disks-1]; 

       }

}

@end</lang> Test code: TowersTest.m: <lang objc>#import <stdio.h>

  1. import "TowersOfHanoi.h"

int main( int argc, const char *argv[] ) { @autoreleasepool {

TowersOfHanoi *tower = [[TowersOfHanoi alloc] init];

int from = 1; int to = 3; int via = 2; int disks = 3;

[tower setPegFrom: from andSetPegTo: to andSetPegVia: via andSetNumDisks: disks];

[tower movePegFrom: from andMovePegTo: to andMovePegVia: via andWithNumDisks: disks];

} return 0; }</lang>

OCaml

<lang ocaml>let rec hanoi n a b c = 

 if n <> 0 then begin
   hanoi (pred n) a c b;
   Printf.printf "Move disk from pole %d to pole %d\n" a b;
   hanoi (pred n) c b a
 end

let () = 

 hanoi 4 1 2 3</lang>

Octave

<lang octave>function hanoimove(ndisks, from, to, via) 

 if ( ndisks == 1 )
   printf("Move disk from pole %d to pole %d\n", from, to);
 else
   hanoimove(ndisks-1, from, via, to);
   hanoimove(1, from, to, via);
   hanoimove(ndisks-1, via, to, from);
 endif

endfunction

hanoimove(4, 1, 2, 3);</lang>

Oz

<lang oz>declare 

 proc {TowersOfHanoi N From To Via}
    if N > 0 then
       {TowersOfHanoi N-1 From Via To}
       {System.showInfo "Move from "#From#" to "#To}
       {TowersOfHanoi N-1 Via To From}
    end
 end

in 

 {TowersOfHanoi 4 left middle right}</lang>

Pascal

Works with: Free Pascal version 2.0.4

I think it is standard pascal, except for the constant array "strPole". I am not sure if constant arrays are part of the standard. However, as far as I know, they are a "de facto" standard in every compiler. <lang pascal>program Hanoi; type 

 TPole = (tpLeft, tpCenter, tpRight);

const 

 strPole:array[TPole] of string[6]=('left','center','right');

procedure MoveStack (const Ndisks : integer; const Origin,Destination,Auxiliary:TPole);
begin
 if Ndisks >0 then begin
    MoveStack(Ndisks - 1, Origin,Auxiliary, Destination );
    Writeln('Move disk ',Ndisks ,' from ',strPole[Origin],' to ',strPole[Destination]);
    MoveStack(Ndisks - 1, Auxiliary, Destination, origin);
 end;
end;

begin 

MoveStack(4,tpLeft,tpCenter,tpRight);

end.</lang> A little longer, but clearer for my taste <lang pascal>program Hanoi; type 

 TPole = (tpLeft, tpCenter, tpRight);

const 

 strPole:array[TPole] of string[6]=('left','center','right');

procedure MoveOneDisk(const DiskNum:integer; const Origin,Destination:TPole);
begin
 Writeln('Move disk ',DiskNum,' from ',strPole[Origin],' to ',strPole[Destination]);
end;

procedure MoveStack (const Ndisks : integer; const Origin,Destination,Auxiliary:TPole);
begin
 if Ndisks =1 then
      MoveOneDisk(1,origin,Destination)
 else begin
      MoveStack(Ndisks - 1, Origin,Auxiliary, Destination );
      MoveOneDisk(Ndisks,origin,Destination);
      MoveStack(Ndisks - 1, Auxiliary, Destination, origin);
 end;
end;

begin 

MoveStack(4,tpLeft,tpCenter,tpRight);

end.</lang>

Perl

<lang perl>sub hanoi { 

   my ($n, $from, $to, $via) = (@_, 1, 2, 3);

   if ($n == 1) {
       print "Move disk from pole $from to pole $to.\n";
   } else {
       hanoi($n - 1, $from, $via, $to);
       hanoi(1, $from, $to, $via);
       hanoi($n - 1, $via, $to, $from);
   };

};</lang>

Perl 6

<lang perl6>subset Peg of Int where 1|2|3;

multi hanoi (0, Peg $a, Peg $b, Peg $c) { } multi hanoi (Int $n, Peg $a = 1, Peg $b = 2, Peg $c = 3) { 

   hanoi $n - 1, $a, $c, $b;
   say "Move $a to $b.";
   hanoi $n - 1, $c, $b, $a;

}</lang>

PHL

Translation of: C

<lang phl>module hanoi;

extern printf;

@Void move(@Integer n, @Integer from, @Integer to, @Integer via) [ if (n > 0) { move(n - 1, from, via, to); printf("Move disk from pole %d to pole %d\n", from, to); move(n - 1, via, to, from); } ]

@Integer main [ move(4, 1,2,3); return 0; ]</lang>

PHP

Translation of: Java

<lang php>function move($n,$from,$to,$via) { 

   if ($n === 1) {
       print("Move disk from pole $from to pole $to");
   } else {
       move($n-1,$from,$via,$to);
       move(1,$from,$to,$via);
       move($n-1,$via,$to,$from);
   }

}</lang>

PicoLisp

<lang PicoLisp>(de move (N A B C) # Use: (move 3 'left 'center 'right) 

  (unless (=0 N)
     (move (dec N) A C B)
     (println 'Move 'disk 'from A 'to B)
     (move (dec N) C B A) ) )</lang>

Pop11

<lang pop11>define hanoi(n, src, dst, via); if n > 0 then 

   hanoi(n - 1, src, via, dst);
   'Move disk ' >< n >< ' from ' >< src >< ' to ' >< dst >< '.' =>
   hanoi(n - 1, via, dst, src);

endif; enddefine;

hanoi(4, "left", "middle", "right");</lang>

PL/I

Translation of: Fortran

<lang pli>tower: proc options (main); 

  call Move (4,1,2,3);

Move: procedure (ndiscs, from, to, via) recursive; 

  declare (ndiscs, from, to, via) fixed binary;

  if ndiscs = 1 then
     put skip edit ('Move disc from pole ', trim(from), ' to pole ',
        trim(to) ) (a);
  else
     do;
        call Move (ndiscs-1, from, via, to);
        call Move (1, from, to, via);
        call Move (ndiscs-1, via, to, from);
     end;

end Move;

end tower;</lang>

PostScript

A million-page document, each page showing one move. <lang PostScript>%!PS-Adobe-3.0 %%BoundingBox: 0 0 300 300

/plate { 

       exch 100 mul 50 add exch th mul 10 add moveto
       dup s mul neg 2 div 0 rmoveto
       dup s mul 0 rlineto
       0 th rlineto
       s neg mul 0 rlineto
       closepath gsave .5 setgray fill grestore 0 setgray stroke

} def

/drawtower { 

       0 1 2 { /x exch def /y 0 def
               tower x get {
                       dup 0 gt { x y plate /y y 1 add def } {pop} ifelse
               } forall
       } for showpage

} def

/apop { [ exch aload pop /last exch def ] last } def /apush{ [ 3 1 roll aload pop counttomark -1 roll ] } def

/hanoi { 

       0 dict begin /from /mid /to /h 5 -1 2 { -1 roll def } for
       h 1 eq {        
               tower from get apop tower to get apush
               tower to 3 -1 roll put
               tower from 3 -1 roll put
               drawtower
       } {     
               /h h 1 sub def
               from to mid h hanoi
               from mid to 1 hanoi
               mid from to h hanoi
       } ifelse
       end

} def


/n 12 def /s 90 n div def /th 180 n div def /tower [ [n 1 add -1 2 { } for ] [] [] ] def

drawtower 0 1 2 n hanoi

%%EOF</lang>

Prolog

From Programming in Prolog by W.F. Clocksin & C.S. Mellish <lang prolog>hanoi(N) :- move(N,left,center,right).

move(0,_,_,_) :- !. move(N,A,B,C) :- 

   M is N-1,
   move(M,A,C,B),
   inform(A,B),
   move(M,C,B,A).

inform(X,Y) :- write([move,a,disk,from,the,X,pole,to,Y,pole]), nl.</lang>

PureBasic

Algorithm according to http://en.wikipedia.org/wiki/Towers_of_Hanoi <lang PureBasic>Procedure Hanoi(n, A.s, C.s, B.s) 

 If n
   Hanoi(n-1, A, B, C)
   PrintN("Move the plate from "+A+" to "+C)
   Hanoi(n-1, B, C, A)
 EndIf

EndProcedure</lang> Full program <lang PureBasic>Procedure Hanoi(n, A.s, C.s, B.s) 

 If n
   Hanoi(n-1, A, B, C)
   PrintN("Move the plate from "+A+" to "+C)
   Hanoi(n-1, B, C, A)
 EndIf

EndProcedure

If OpenConsole() 

 Define n=3
 PrintN("Moving "+Str(n)+" pegs."+#CRLF$)
 Hanoi(n,"Left Peg","Middle Peg","Right Peg")
 PrintN(#CRLF$+"Press ENTER to exit."): Input()

EndIf</lang>

Output:
Moving 3 pegs.

Move the plate from Left Peg to Middle Peg
Move the plate from Left Peg to Right Peg
Move the plate from Middle Peg to Right Peg
Move the plate from Left Peg to Middle Peg
Move the plate from Right Peg to Left Peg
Move the plate from Right Peg to Middle Peg
Move the plate from Left Peg to Middle Peg

Press ENTER to exit.

Python

<lang python>def hanoi(ndisks, startPeg=1, endPeg=3): 

   if ndisks:
       hanoi(ndisks-1, startPeg, 6-startPeg-endPeg)
       print "Move disk %d from peg %d to peg %d" % (ndisks, startPeg, endPeg)
       hanoi(ndisks-1, 6-startPeg-endPeg, endPeg)

hanoi(ndisks=4)</lang>

R

Translation of: Octave

<lang rsplus>hanoimove <- function(ndisks, from, to, via) { 

 if ( ndisks == 1 )
   cat("move disk from", from, "to", to, "\n")
 else {
   hanoimove(ndisks-1, from, via, to)
   hanoimove(1, from, to, via)
   hanoimove(ndisks-1, via, to, from)
 }

}

hanoimove(4,1,2,3)</lang>


Racket

<lang racket>

  1. lang racket

(define (hanoi n a b c) 

 (when (> n 0)
   (hanoi (- n 1) a c b)
   (printf "Move ~a to ~a\n" a b)
   (hanoi (- n 1) c b a)))

(hanoi 4 'left 'middle 'right) </lang>

Rascal

Translation of: Python

<lang rascal>public void hanoi(ndisks, startPeg, endPeg){ if(ndisks>0){ hanoi(ndisks-1, startPeg, 6 - startPeg - endPeg); println("Move disk <ndisks> from peg <startPeg> to peg <endPeg>"); hanoi(ndisks-1, 6 - startPeg - endPeg, endPeg); } }</lang> Output <lang rascal>rascal>hanoi(4,1,3) Move disk 1 from peg 1 to peg 2 Move disk 2 from peg 1 to peg 3 Move disk 1 from peg 2 to peg 3 Move disk 3 from peg 1 to peg 2 Move disk 1 from peg 3 to peg 1 Move disk 2 from peg 3 to peg 2 Move disk 1 from peg 1 to peg 2 Move disk 4 from peg 1 to peg 3 Move disk 1 from peg 2 to peg 3 Move disk 2 from peg 2 to peg 1 Move disk 1 from peg 3 to peg 1 Move disk 3 from peg 2 to peg 3 Move disk 1 from peg 1 to peg 2 Move disk 2 from peg 1 to peg 3 Move disk 1 from peg 2 to peg 3 ok</lang>

Raven

Translation of: Python

<lang raven>define hanoi use ndisks, startpeg, endpeg 

  ndisks 0 > if
     6 startpeg - endpeg - startpeg ndisks 1 - hanoi
     endpeg startpeg ndisks "Move disk %d from peg %d to peg %d\n" print 
     endpeg 6 startpeg - endpeg - ndisks 1 - hanoi

define dohanoi use ndisks 

  # startpeg=1, endpeg=3
  3 1 ndisks hanoi
  1. 4 disks

4 dohanoi </lang>

Output:
raven hanoi.rv 
Move disk 1 from peg 1 to peg 2
Move disk 2 from peg 1 to peg 3
Move disk 1 from peg 2 to peg 3
Move disk 3 from peg 1 to peg 2
Move disk 1 from peg 3 to peg 1
Move disk 2 from peg 3 to peg 2
Move disk 1 from peg 1 to peg 2
Move disk 4 from peg 1 to peg 3
Move disk 1 from peg 2 to peg 3
Move disk 2 from peg 2 to peg 1
Move disk 1 from peg 3 to peg 1
Move disk 3 from peg 2 to peg 3
Move disk 1 from peg 1 to peg 2
Move disk 2 from peg 1 to peg 3
Move disk 1 from peg 2 to peg 3

REBOL

<lang REBOL>REBOL [ Title: "Towers of Hanoi" Author: oofoe Date: 2009-12-08 URL: http://rosettacode.org/wiki/Towers_of_Hanoi ]

hanoi: func [ {Begin moving the golden disks from one pole to the next. Note: when last disk moved, the world will end.} disks [integer!] "Number of discs on starting pole." /poles "Name poles." from to via ][ 

   if disks = 0 [return]

if not poles [from: 'left to: 'middle via: 'right] 

   hanoi/poles disks - 1 from via to

print [from "->" to] 

   hanoi/poles disks - 1 via to from

]

hanoi 4</lang>

Output:
left -> right
left -> middle
right -> middle
left -> right
middle -> left
middle -> right
left -> right
left -> middle
right -> middle
right -> left
middle -> left
right -> middle
left -> right
left -> middle
right -> middle

Retro

<lang Retro>4 elements a b c n

vars !c !b !a !n ;
hanoi ( num from to via -- )
 vars
 @n 0 <>
 [
   @n @a @b @c
   @n 1- @a @c @b hanoi
   vars
   @b @a "\nMove a ring from %d to %d" puts
   @n 1- @c @b @a hanoi
 ] ifTrue ;

4 1 3 2 hanoi</lang>

REXX

simple text moves

<lang rexx>/*REXX program to show the moves to solve the Tower of Hanoi (3 disks). */ arg z . /*get possible specification of Z*/ if z== then z=3 /*Not given? Use default 3 towers*/ move=0 /*number of ring moves so far. */ call mov 1,3,z /*move top ring, then recurse... */ say say 'The minimum number of moves to solve a' z "ring Tower of Hanoi is" 2**z-1 exit /*stick a fork in it, we're done.*/ /*─────────────────────────────MOV subroutine───────────────────────────*/ mov: procedure expose move; arg #1, #2, #3 if #3==1 then call dsk #1, #2 

        else do
             call mov #1,        6-#1-#2,   #3-1
             call mov #1,        #2,        1
             call mov 6-#1-#2,   #2,        #3-1
             end

return /*─────────────────────────────DSK subroutine───────────────────────────*/ dsk: move=move+1 say 'step' right(move,length(moves))": move disk " arg(1) '──►' arg(2) return</lang>

Output:
step 1:  move disk  1 ──► 3
step 2:  move disk  1 ──► 2
step 3:  move disk  3 ──► 2
step 4:  move disk  1 ──► 3
step 5:  move disk  2 ──► 1
step 6:  move disk  2 ──► 3
step 7:  move disk  1 ──► 3

The minimum number of moves to solve a 3 ring Tower of Hanoi is 7.

output when the following was entered (to solve with four disks): 4 

step  1:  move disk  1 ──► 2
step  2:  move disk  1 ──► 3
step  3:  move disk  2 ──► 3
step  4:  move disk  1 ──► 2
step  5:  move disk  3 ──► 1
step  6:  move disk  3 ──► 2
step  7:  move disk  1 ──► 2
step  8:  move disk  1 ──► 3
step  9:  move disk  2 ──► 3
step 10:  move disk  2 ──► 1
step 11:  move disk  3 ──► 1
step 12:  move disk  2 ──► 3
step 13:  move disk  1 ──► 2
step 14:  move disk  1 ──► 3
step 15:  move disk  2 ──► 3

The minimum number of moves to solve a 4 ring Tower of Hanoi is 15.

pictorial moves

This version pictorially shows the moves for solving the Town of Hanoi.

Quite a bit of code has been dedicated to showing a picture of the towers with the disks on them, and the movement of the disk (the move). Coloring of the rings is attempted with dithering.

In addition, it shows each move in a countdown manner (the last move is move #1).

No attempt is mode to explain this version of the REXX program 'cause of the complexity and somewhat obtuse features of the REXX language, the smallest of which is support for ASCII and EBCDIC "graphic" characters. It may not be obvious, but whenever a ring is moved from one tower to another, it is always the top ring that is moved. <lang rexx>/*REXX program shows pictorial moves to solve Tower of Hanoi (3 disks). */ arg z .; if z== then z=3 sw=80; wp=sw%3-1; blanks=centre(,wp) c.1=sw%3%2 c.2=sw%2-1 c.3=sw-1-c.1-1 move=0; totmoves=2**z-1; movek=totmoves; lentot=length(totmoves) @abc='abcdefghijklmnopqrstuvwxyz' ebcdic= 'f0'x==0 if ebcdic then do 

              bar='bf'x;ar='df'x;boxen='db9f9caf'x;tl='ac'x;tr='bf'x;bl='ab'x;br='bb'x;vert='fa'x;down='9a'x
              end
         else do
              bar='c4'x;ar='10'x;boxen='b0b1b2db'x;tl='da'x;tr='bf'x;bl='c0'x;br='d9'x;vert='b3'x;down='19'x
              end

verts=vert || vert downs=down || down Tcorners=tl || tr Bcorners=bl || br box=left(boxen,1); boxchars=boxen || @abc bararrow=bar || bar || ar $.=0; $.1=z; k=z; kk=k+k 

 do j=1 for z
 @.3.j=blanks;   @.2.j=blanks
 @.1.j=centre(copies(box,kk),wp)
 if z<=length(boxchars) then @.1.j=,
                             translate(@.1.j,substr(boxchars,kk%2,1),box)
 kk=kk-2
 end   /*j*/

call showtowers; call mov 1,3,z say say "The minimum number of moves for a" z 'ring Tower of Hanoi is' totmoves exit /*─────────────────────────────MOV subroutine───────────────────────────*/ mov: if arg(3)==1 then call rng arg(1) arg(2) 

                 else do
                      call mov arg(1),6-arg(1)-arg(2),arg(3)-1
                      call mov arg(1),arg(2),1
                      call mov 6-arg(1)-arg(2),arg(2),arg(3)-1
                      end

return /*─────────────────────────────RNG subroutine───────────────────────────*/ rng: parse arg from dest; move=move+1; pp= if from==1 then do 

               pp=overlay(bl,pp,c.1)
               pp=overlay(bar,pp,c.1+1,c.dest-c.1-1,bar)
               pp=pp || tr
               end

if from==3 then do 

               pp=overlay(br,pp,c.3)
               pp=overlay(bar,pp,c.dest+1,c.3-c.dest-1,bar)
               pp=overlay(tl,pp,c.dest)
               end

if from==2 then do 

               lpost=min(2,dest)
               hpost=max(2,dest)
               if dest==1 then do
                               pp=overlay(tl,pp,c.1)
                               pp=overlay(bar,pp,c.1+1,c.2-c.1-1,bar)
                               pp=pp || br
                               end
               if dest==3 then do
                               pp=overlay(bl,pp,c.2)
                               pp=overlay(bar,pp,c.2+1,c.3-c.2-1,bar)
                               pp=pp || tr
                               end
               end

say translate(pp,verts,Bcorners||Tcorners||bar); say overlay(movek,pp,1) say translate(pp,verts,Tcorners||Bcorners||bar) say translate(pp,downs,Tcorners||Bcorners||bar) movek=movek-1 $.from=$.from-1; $.dest=$.dest+1; _f=$.from+1; _t=$.dest @.dest._t=@.from._f; @.from._f=blanks call showtowers return /*─────────────────────────────SHOWTOWERS subroutine────────────────────*/ showtowers: do j=z to 1 by -1 

             _p=@.1.j  @.2.j  @.3.j;   if _p\= then say _p
             end    /*j*/

return</lang>

Output:
           ░░
          ▒▒▒▒
         ▓▓▓▓▓▓
            │
7           └───────────────────────────────────────────────────┐
                                                                │
                                                                ↓
          ▒▒▒▒
         ▓▓▓▓▓▓                                                ░░
            │
6           └─────────────────────────┐
                                      │
                                      ↓
         ▓▓▓▓▓▓                     ▒▒▒▒                       ░░
                                                                │
5                                     ┌─────────────────────────┘
                                      │
                                      ↓
                                     ░░
         ▓▓▓▓▓▓                     ▒▒▒▒
            │
4           └───────────────────────────────────────────────────┐
                                                                │
                                                                ↓
                                     ░░
                                    ▒▒▒▒                     ▓▓▓▓▓▓
                                      │
3           ┌─────────────────────────┘
            │
            ↓
           ░░                       ▒▒▒▒                     ▓▓▓▓▓▓
                                      │
2                                     └─────────────────────────┐
                                                                │
                                                                ↓
                                                              ▒▒▒▒
           ░░                                                ▓▓▓▓▓▓
            │
1           └───────────────────────────────────────────────────┐
                                                                │
                                                                ↓
                                                               ░░
                                                              ▒▒▒▒
                                                             ▓▓▓▓▓▓

The minimum number of moves for a 3 ring Tower of Hanoi is 7

Ruby

<lang ruby>def move(num_disks, start=0, target=1, using=2) 

 if num_disks == 1
  @towers[target] << @towers[start].pop
   puts "Move disk from #{start} to #{target} : #{@towers}"
 else
   move(num_disks-1, start, using, target)
   move(1,           start, target, using)
   move(num_disks-1, using, target, start)
 end

end

n = 5 @towers = [[*1..n].reverse, [], []] move(n)</lang>

Output:
Move disk from 0 to 1 : [[5, 4, 3, 2], [1], []]
Move disk from 0 to 2 : [[5, 4, 3], [1], [2]]
Move disk from 1 to 2 : [[5, 4, 3], [], [2, 1]]
Move disk from 0 to 1 : [[5, 4], [3], [2, 1]]
Move disk from 2 to 0 : [[5, 4, 1], [3], [2]]
Move disk from 2 to 1 : [[5, 4, 1], [3, 2], []]
Move disk from 0 to 1 : [[5, 4], [3, 2, 1], []]
Move disk from 0 to 2 : [[5], [3, 2, 1], [4]]
Move disk from 1 to 2 : [[5], [3, 2], [4, 1]]
Move disk from 1 to 0 : [[5, 2], [3], [4, 1]]
Move disk from 2 to 0 : [[5, 2, 1], [3], [4]]
Move disk from 1 to 2 : [[5, 2, 1], [], [4, 3]]
Move disk from 0 to 1 : [[5, 2], [1], [4, 3]]
Move disk from 0 to 2 : [[5], [1], [4, 3, 2]]
Move disk from 1 to 2 : [[5], [], [4, 3, 2, 1]]
Move disk from 0 to 1 : [[], [5], [4, 3, 2, 1]]
Move disk from 2 to 0 : [[1], [5], [4, 3, 2]]
Move disk from 2 to 1 : [[1], [5, 2], [4, 3]]
Move disk from 0 to 1 : [[], [5, 2, 1], [4, 3]]
Move disk from 2 to 0 : [[3], [5, 2, 1], [4]]
Move disk from 1 to 2 : [[3], [5, 2], [4, 1]]
Move disk from 1 to 0 : [[3, 2], [5], [4, 1]]
Move disk from 2 to 0 : [[3, 2, 1], [5], [4]]
Move disk from 2 to 1 : [[3, 2, 1], [5, 4], []]
Move disk from 0 to 1 : [[3, 2], [5, 4, 1], []]
Move disk from 0 to 2 : [[3], [5, 4, 1], [2]]
Move disk from 1 to 2 : [[3], [5, 4], [2, 1]]
Move disk from 0 to 1 : [[], [5, 4, 3], [2, 1]]
Move disk from 2 to 0 : [[1], [5, 4, 3], [2]]
Move disk from 2 to 1 : [[1], [5, 4, 3, 2], []]
Move disk from 0 to 1 : [[], [5, 4, 3, 2, 1], []]

or <lang ruby># solve(source, via, target)

  1. Example:
  2. solve([5, 4, 3, 2, 1], [], [])
  3. Note this will also solve randomly placed disks,
  4. "place all disk in target with legal moves only".

def solve(*towers) 

 # total number of disks
 disks = towers.inject(0){|sum, tower| sum+tower.length}
 x=0 # sequence number
 p towers # initial trace
 # have we solved the puzzle yet?
 while towers.last.length < disks do
   x+=1 # assume the next step
   from = (x&x-1)%3
   to = ((x|(x-1))+1)%3
   # can we actually take from tower?
   if top = towers[from].last
     bottom = towers[to].last
     # is the move legal?
     if !bottom || bottom > top
       # ok, do it!
       towers[to].push(towers[from].pop)
       p towers # trace
     end
   end
 end

end

solve([5, 4, 3, 2, 1], [], [])</lang>

Output:
[[5, 4, 3, 2, 1], [], []]
[[5, 4, 3, 2], [], [1]]
[[5, 4, 3], [2], [1]]
[[5, 4, 3], [2, 1], []]
[[5, 4], [2, 1], [3]]
[[5, 4, 1], [2], [3]]
[[5, 4, 1], [], [3, 2]]
[[5, 4], [], [3, 2, 1]]
[[5], [4], [3, 2, 1]]
[[5], [4, 1], [3, 2]]
[[5, 2], [4, 1], [3]]
[[5, 2, 1], [4], [3]]
[[5, 2, 1], [4, 3], []]
[[5, 2], [4, 3], [1]]
[[5], [4, 3, 2], [1]]
[[5], [4, 3, 2, 1], []]
[[], [4, 3, 2, 1], [5]]
[[1], [4, 3, 2], [5]]
[[1], [4, 3], [5, 2]]
[[], [4, 3], [5, 2, 1]]
[[3], [4], [5, 2, 1]]
[[3], [4, 1], [5, 2]]
[[3, 2], [4, 1], [5]]
[[3, 2, 1], [4], [5]]
[[3, 2, 1], [], [5, 4]]
[[3, 2], [], [5, 4, 1]]
[[3], [2], [5, 4, 1]]
[[3], [2, 1], [5, 4]]
[[], [2, 1], [5, 4, 3]]
[[1], [2], [5, 4, 3]]
[[1], [], [5, 4, 3, 2]]
[[], [], [5, 4, 3, 2, 1]]

Run BASIC

<lang runbasic>a = move(4, "1", "2", "3") function move(n, a$, b$, c$) if n > 0 then a = move(n-1, a$, c$, b$) print "Move disk from " ; a$ ; " to " ; c$ a = move(n-1, b$, a$, c$) end if end function</lang> 

Move disk from 1 to 3
Move disk from 1 to 2
Move disk from 3 to 2
Move disk from 1 to 3
Move disk from 2 to 1
Move disk from 2 to 3
Move disk from 1 to 3
Move disk from 1 to 2
Move disk from 3 to 2
Move disk from 3 to 1
Move disk from 2 to 1
Move disk from 3 to 2
Move disk from 1 to 3
Move disk from 1 to 2
Move disk from 3 to 2

Rust

Translation of: C

<lang rust> fn move(n: int, from: int, to: int, via: int) { 

 if n > 0 {
   move(n - 1, from, via, to);
   println!("Move disk from pole {:d} to pole {:d}", from, to);
   move(n - 1, via, to, from);
 }

}

fn main() { 

 move(4, 1,2,3);

} </lang>

Sather

Translation of: Fortran

<lang sather>class MAIN is 

 move(ndisks, from, to, via:INT) is
   if ndisks = 1 then
     #OUT + "Move disk from pole " + from + " to pole " + to + "\n";
   else
     move(ndisks-1, from, via, to);
     move(1, from, to, via);
     move(ndisks-1, via, to, from);
   end;
 end;

 main is
   move(4, 1, 2, 3);
 end;

end;</lang>

Scala

<lang scala>def move(n: Int, from: Int, to: Int, via: Int) : Unit = { 

   if (n == 1) {
     Console.println("Move disk from pole " + from + " to pole " + to)
   } else {
     move(n - 1, from, via, to)
     move(1, from, to, via)
     move(n - 1, via, to, from)
   }
 }</lang>

This next example is from http://gist.github.com/66925 it is a translation to Scala of a Prolog solution and solves the problem at compile time <lang scala>object TowersOfHanoi { 

 import scala.reflect.Manifest
 
 def simpleName(m:Manifest[_]):String = {
   val name = m.toString
   name.substring(name.lastIndexOf('$')+1)
 }
 
 trait Nat
 final class _0 extends Nat
 final class Succ[Pre<:Nat] extends Nat

 type _1 = Succ[_0]
 type _2 = Succ[_1]
 type _3 = Succ[_2]
 type _4 = Succ[_3]

 case class Move[N<:Nat,A,B,C]()

 implicit def move0[A,B,C](implicit a:Manifest[A],b:Manifest[B]):Move[_0,A,B,C] = {
       System.out.println("Move from "+simpleName(a)+" to "+simpleName(b));null
 }

 implicit def moveN[P<:Nat,A,B,C](implicit m1:Move[P,A,C,B],m2:Move[_0,A,B,C],m3:Move[P,C,B,A])
  :Move[Succ[P],A,B,C] = null
 
 def run[N<:Nat,A,B,C](implicit m:Move[N,A,B,C]) = null
 
 case class Left()
 case class Center()
 case class Right()
 
 def main(args:Array[String]){
   run[_2,Left,Right,Center]
 }

}</lang>

Scheme

<lang scheme>(define (hanoi n a b c) 

 (if (> n 0)
   (begin
     (hanoi (- n 1) a c b)
     (display "Move disk from pole ")
     (display a)
     (display " to pole ")
     (display b)
     (newline)
     (hanoi (- n 1) c b a))))

(hanoi 4 1 2 3)</lang>

Seed7

<lang seed7>const proc: hanoi (in integer: disk, in string: source, in string: dest, in string: via) is func 

 begin
   if disk > 0 then
     hanoi(pred(disk), source, via, dest);
     writeln("Move disk " <& disk <& " from " <& source <& " to " <& dest);
     hanoi(pred(disk), via, dest, source);
   end if;
 end func;</lang>

SNOBOL4

<lang SNOBOL4>* # Note: count is global 

       define('hanoi(n,src,trg,tmp)') :(hanoi_end)

hanoi hanoi = eq(n,0) 1 :s(return) 

       hanoi(n - 1, src, tmp, trg)
       count = count + 1
       output = count ': Move disc from ' src ' to ' trg
       hanoi(n - 1, tmp, trg, src) :(return)

hanoi_end

  • # Test with 4 discs
       hanoi(4,'A','C','B')

end</lang>

Output:
1: Move disc from A to B
2: Move disc from A to C
3: Move disc from B to C
4: Move disc from A to B
5: Move disc from C to A
6: Move disc from C to B
7: Move disc from A to B
8: Move disc from A to C
9: Move disc from B to C
10: Move disc from B to A
11: Move disc from C to A
12: Move disc from B to C
13: Move disc from A to B
14: Move disc from A to C
15: Move disc from B to C

Tcl

The use of interp alias shown is a sort of closure: keep track of the number of moves required <lang tcl>interp alias {} hanoi {} do_hanoi 0

proc do_hanoi {count n {from A} {to C} {via B}} { 

   if {$n == 1} {
       interp alias {} hanoi {} do_hanoi [incr count]
       puts "$count: move from $from to $to"
   } else {
       incr n -1
       hanoi $n $from $via $to
       hanoi 1  $from $to $via
       hanoi $n $via $to $from
   }

}

hanoi 4</lang>

Output:
1: move from A to B
2: move from A to C
3: move from B to C
4: move from A to B
5: move from C to A
6: move from C to B
7: move from A to B
8: move from A to C
9: move from B to C
10: move from B to A
11: move from C to A
12: move from B to C
13: move from A to B
14: move from A to C
15: move from B to C

TI-83 BASIC

TI-83 BASIC lacks recursion, so technically this task is impossible, however here is a version that uses an iterative method. <lang ti-83b>PROGRAM:TOHSOLVE 0→A 1→B 0→C 0→D 0→M 1→R While A<1 or A>7 Input "No. of rings=?",A End randM(A+1,3)→[C] [[1,2][1,3][2,3]]→[E]

Fill(0,[C]) For(I,1,A,1) I?[C](I,1) End ClrHome While [C](1,3)≠1 and [C](1,2)≠1

For(J,1,3) For(I,1,A) If [C](I,J)≠0:Then Output(I+1,3J,[C](I,J)) End End End While C=0 Output(1,3B," ") 1→I [E](R,2)→J While [C](I,J)=0 and I≤A I+1→I End [C](I,J)→D 1→I [E](R,1)→J While [C](I,J)=0 and I≤A I+1→I End If (D<[C](I,J) and D≠0) or [C](I,J)=0:Then [E](R,2)→B Else [E](R,1)→B End

1→I While [C](I,B)=0 and I≤A I+1→I End If I≤A:Then [C](I,B)→C 0→[C](I,B) Output(I+1,3B," ") End Output(1,3B,"V") End

While C≠0 Output(1,3B," ") If B=[E](R,2):Then [E](R,1)→B Else [E](R,2)→B End

1→I While [C](I,B)=0 and I≤A I+1→I End If [C](I,B)=0 or [C](I,B)>C:Then C→[C](I-1,B) 0→C M+1→M End End Output(1,3B,"V") R+1→R If R=4:Then:1→R:End

End </lang>

Toka

<lang toka>value| sa sb sc n | [ to sc to sb to sa to n ] is vars! [ ( num from to via -- ) 

 vars!
 n 0 <>
 [
   n sa sb sc 
   n 1- sa sc sb recurse
   vars!
   ." Move a ring from " sa . ." to " sb . cr
   n 1- sc sb sa recurse
 ] ifTrue

] is hanoi</lang>

TSE SAL

<lang TSESAL>// library: program: run: towersofhanoi: recursive: sub <description></description> <version>1.0.0.0.0</version> <version control></version control> (filenamemacro=runprrsu.s) [kn, ri, tu, 07-02-2012 19:54:23] PROC PROCProgramRunTowersofhanoiRecursiveSub( INTEGER totalDiskI, STRING fromS, STRING toS, STRING viaS, INTEGER bufferI ) 

IF ( totalDiskI == 0 )
 RETURN()
ENDIF
PROCProgramRunTowersofhanoiRecursiveSub( totalDiskI - 1, fromS, viaS, toS, bufferI )
AddLine( Format( "Move disk", " ", totalDiskI, " ", "from peg", " ", "'", fromS, "'", " ", "to peg", " ", "'", toS, "'" ), bufferI )
PROCProgramRunTowersofhanoiRecursiveSub( totalDiskI - 1, viaS, toS, fromS, bufferI )

END

// library: program: run: towersofhanoi: recursive <description></description> <version>1.0.0.0.6</version> <version control></version control> (filenamemacro=runprtre.s) [kn, ri, tu, 07-02-2012 19:40:45] PROC PROCProgramRunTowersofhanoiRecursive( INTEGER totalDiskI, STRING fromS, STRING toS, STRING viaS ) 

INTEGER bufferI = 0
PushPosition()
bufferI = CreateTempBuffer()
PopPosition()
PROCProgramRunTowersofhanoiRecursiveSub( totalDiskI, fromS, toS, viaS, bufferI )
GotoBufferId( bufferI )

END

PROC Main() STRING s1[255] = "4" IF ( NOT ( Ask( "program: run: towersofhanoi: recursive: totalDiskI = ", s1, _EDIT_HISTORY_ ) ) AND ( Length( s1 ) > 0 ) ) RETURN() ENDIF 

PROCProgramRunTowersofhanoiRecursive( Val( s1 ), "source", "target", "via" )

END</lang>

UNIX Shell

Works with: bash

<lang bash>#!/bin/bash

move() { 

 local n="$1"
 local from="$2"
 local to="$3"
 local via="$4"

 if "$n" == "1" 
 then
   echo "Move disk from pole $from to pole $to"
 else
   move $(($n - 1)) $from $via $to
   move 1 $from $to $via
   move $(($n - 1)) $via $to $from
 fi

}

move $1 $2 $3 $4</lang>

Ursala

<lang Ursala>#import nat

move = ~&al^& ^rlPlrrPCT/~&arhthPX ^|W/~& ^|G/predecessor ^/~&htxPC ~&zyxPC

  1. show+

main = ^|T(~&,' -> '--)* move/4 <'start','end','middle'></lang>

Output:
start -> middle
start -> end
middle -> end
start -> middle
end -> start
end -> middle
start -> middle
start -> end
middle -> end
middle -> start
end -> start
middle -> end
start -> middle
start -> end
middle -> end

Vedit macro language

This implementation outputs the results in current edit buffer. <lang vedit>#1=1; #2=2; #3=3; #4=4 // move 4 disks from 1 to 2 Call("MOVE_DISKS") Return

// Move disks // #1 = from, #2 = to, #3 = via, #4 = number of disks //

MOVE_DISKS:

if (#4 > 0) { 

   Num_Push(1,4)
       #9=#2; #2=#3; #3=#9; #4--       // #1 to #3 via #2
       Call("MOVE_DISKS")
   Num_Pop(1,4)

   Ins_Text("Move a disk from ")       // move one disk
   Num_Ins(#1, LEFT+NOCR)
   Ins_Text(" to ")
   Num_Ins(#2, LEFT)

   Num_Push(1,4)
       #9=#1; #1=#3; #3 = #9; #4--     // #3 to #2 via #1
       Call("MOVE_DISKS")
   Num_Pop(1,4)

} Return</lang>

Visual Basic .NET

<lang vbnet>Module TowersOfHanoi 

   Sub MoveTowerDisks(ByVal disks As Integer, ByVal fromTower As Integer, ByVal toTower As Integer, ByVal viaTower As Integer)
       If disks > 0 Then
           MoveTowerDisks(disks - 1, fromTower, viaTower, toTower)
           System.Console.WriteLine("Move disk {0} from {1} to {2}", disks, fromTower, toTower)
           MoveTowerDisks(disks - 1, viaTower, toTower, fromTower)
       End If
   End Sub

   Sub Main()
       MoveTowerDisks(4, 1, 2, 3)
   End Sub

End Module</lang>

XPL0

<lang XPL0>code Text=12;

proc MoveTower(Discs, From, To, Using); int Discs, From, To, Using; [if Discs > 0 then 

   [MoveTower(Discs-1, From, Using, To);
   Text(0, "Move from ");  Text(0, From);
   Text(0, " peg to ");  Text(0, To);  Text(0, " peg.^M^J");
   MoveTower(Discs-1, Using, To, From);
   ];

];

MoveTower(3, "left", "right", "center")</lang>

Output: 

Move from left peg to right peg.
Move from left peg to center peg.
Move from right peg to center peg.
Move from left peg to right peg.
Move from center peg to left peg.
Move from center peg to right peg.
Move from left peg to right peg.

XSLT

<lang xml><xsl:template name="hanoi"> <xsl:param name="n"/> <xsl:param name="from">left</xsl:param> <xsl:param name="to">middle</xsl:param> <xsl:param name="via">right</xsl:param> 

 <xsl:if test="$n > 0">
   <xsl:call-template name="hanoi">
     <xsl:with-param name="n"    select="$n - 1"/>
     <xsl:with-param name="from" select="$from"/>
     <xsl:with-param name="to"   select="$via"/>
     <xsl:with-param name="via"  select="$to"/>
   </xsl:call-template>
   <fo:block>
     <xsl:text>Move disk from </xsl:text>
     <xsl:value-of select="$from"/>
     <xsl:text> to </xsl:text>
     <xsl:value-of select="$to"/>
   </fo:block>
   <xsl:call-template name="hanoi">
     <xsl:with-param name="n"    select="$n - 1"/>
     <xsl:with-param name="from" select="$via"/>
     <xsl:with-param name="to"   select="$to"/>
     <xsl:with-param name="via"  select="$from"/>
   </xsl:call-template>
 </xsl:if>

</xsl:template></lang> 

<xsl:call-template name="hanoi"><xsl:with-param name="n" select="4"/></xsl:call-template>

XQuery

<lang xquery>declare function local:hanoi($disk as xs:integer, $from as xs:integer, 

   $to as xs:integer, $via as xs:integer) as element()*

{ 

 if($disk > 0)
 then (
   local:hanoi($disk - 1, $from, $via, $to),
   <move disk='{$disk}'><from>{$from}</from><to>{$to}</to></move>,
   local:hanoi($disk - 1, $via, $to, $from)
 ) 
 else ()

};

<hanoi> { 

 local:hanoi(4, 1, 2, 3)

} </hanoi></lang>

Output:

<lang xml><?xml version="1.0" encoding="UTF-8"?> <hanoi> 

  <move disk="1">
     <from>1</from>
     <to>3</to>
  </move>
  <move disk="2">
     <from>1</from>
     <to>2</to>
  </move>
  <move disk="1">
     <from>3</from>
     <to>2</to>
  </move>
  <move disk="3">
     <from>1</from>
     <to>3</to>
  </move>
  <move disk="1">
     <from>2</from>
     <to>1</to>
  </move>
  <move disk="2">
     <from>2</from>
     <to>3</to>
  </move>
  <move disk="1">
     <from>1</from>
     <to>3</to>
  </move>
  <move disk="4">
     <from>1</from>
     <to>2</to>
  </move>
  <move disk="1">
     <from>3</from>
     <to>2</to>
  </move>
  <move disk="2">
     <from>3</from>
     <to>1</to>
  </move>
  <move disk="1">
     <from>2</from>
     <to>1</to>
  </move>
  <move disk="3">
     <from>3</from>
     <to>2</to>
  </move>
  <move disk="1">
     <from>1</from>
     <to>3</to>
  </move>
  <move disk="2">
     <from>1</from>
     <to>2</to>
  </move>
  <move disk="1">
     <from>3</from>
     <to>2</to>
  </move>

</hanoi></lang> to>{$to}

Retrieved from "https://rosettacode.org/wiki/Towers_of_Hanoi?oldid=14326"