File extension is in extensions list
![Task](http://static.miraheze.org/rosettacodewiki/thumb/b/ba/Rcode-button-task-crushed.png/64px-Rcode-button-task-crushed.png)
You are encouraged to solve this task according to the task description, using any language you may know.
Filename extensions are a rudimentary but commonly used way of identifying files types.
- Task
Given an arbitrary filename and a list of extensions, tell whether the filename has one of those extensions.
Notes:
- The check should be case insensitive.
- The extension must occur at the very end of the filename, and be immediately preceded by a dot (
.
). - You may assume that none of the given extensions are the empty string, and none of them contain a dot. Other than that they may be arbitrary strings.
- Extra credit:
- Allow extensions to contain dots. This way, users of your function/program have full control over what they consider as the extension in cases like:
archive.tar.gz
- Please state clearly whether or not your solution does this.
The following test cases all assume this list of extensions: zip
, rar
, 7z
, gz
, archive
, A##
Filename Result MyData.a##
true MyData.tar.Gz
true MyData.gzip
false MyData.7z.backup
false MyData...
false MyData
false
If your solution does the extra credit requirement, add tar.bz2
to the list of extensions, and check the following additional test cases:
Filename Result MyData_v1.0.tar.bz2
true MyData_v1.0.bz2
false
Checking if a file is in a certain category of file formats with known extensions (e.g. archive files, or image files) is a common problem in practice, and may be approached differently from extracting and outputting an arbitrary extension (see e.g. FileNameExtensionFilter
in Java).
It also requires less assumptions about the format of an extension, because the calling code can decide what extensions are valid.
For these reasons, this task exists in addition to the Extract file extension task.
- Related tasks
11l
<lang 11l>F is_ext(file_name, extensions)
R any(extensions.map(e -> @file_name.lowercase().ends_with(‘.’e.lowercase())))
F test(file_names, extensions)
L(file_name) file_names print(file_name.ljust(max(file_names.map(f_n -> f_n.len)))‘ ’String(is_ext(file_name, extensions)))
test([‘MyData.a##’, ‘MyData.tar.Gz’, ‘MyData.gzip’, ‘MyData.7z.backup’, ‘MyData...’, ‘MyData’], [‘zip’, ‘rar’, ‘7z’, ‘gz’, ‘archive’, ‘A##’, ‘tar.bz2’]) test([‘MyData_v1.0.tar.bz2’, ‘MyData_v1.0.bz2’], [‘tar.bz2’])</lang>
- Output:
MyData.a## 1B MyData.tar.Gz 1B MyData.gzip 0B MyData.7z.backup 0B MyData... 0B MyData 0B MyData_v1.0.tar.bz2 1B MyData_v1.0.bz2 0B
Action!
<lang Action!>CHAR FUNC ToLower(CHAR c)
IF c>='A AND c<='Z THEN c==+'a-'A FI
RETURN (c)
BYTE FUNC CheckExt(CHAR ARRAY file,ext)
BYTE i,j CHAR c1,c2
i=file(0) j=ext(0) IF i<j THEN RETURN (0) FI
WHILE j>0 DO c1=ToLower(file(i)) c2=ToLower(ext(j)) IF c1#c2 THEN RETURN (0) FI i==-1 j==-1 OD IF file(i)#'. THEN RETURN (0) FI
RETURN (1)
BYTE FUNC Check(CHAR ARRAY file CARD ARRAY exts BYTE count)
BYTE i
FOR i=0 TO count-1 DO IF CheckExt(file,exts(i)) THEN RETURN (1) FI OD
RETURN (0)
PROC Main()
CARD ARRAY exts(7),files(8) BYTE i
exts(0)="zip" exts(1)="rar" exts(2)="7z" exts(3)="gz" exts(4)="archive" exts(5)="A##" exts(6)="tar.bz2"
files(0)="MyData.a##" files(1)="MyData.tar.Gz" files(2)="MyData.gzip" files(3)="MyData.7z.backup" files(4)="MyData..." files(5)="MyData" files(6)="MyData_v1.0.tar.bz2" files(7)="MyData_v1.0.bz2"
FOR i=0 to 7 DO Print(files(i)) Print(" -> ") IF Check(files(i),exts,7) THEN PrintE("true") ELSE PrintE("false") FI OD
RETURN</lang>
- Output:
Screenshot from Atari 8-bit computer
MyData.a## -> true MyData.tar.Gz -> true MyData.gzip -> false MyData.7z.backup -> false MyData... -> false MyData -> false MyData_v1.0.tar.bz2 -> true MyData_v1.0.bz2 -> false
ALGOL 68
<lang algol68># returns the length of str # OP LENGTH = ( STRING str )INT: ( UPB str - LWB str ) + 1;
- returns TRUE if str ends with ending FALSE otherwise #
PRIO ENDSWITH = 9; OP ENDSWITH = ( STRING str, STRING ending )BOOL:
IF INT str length = LENGTH str; INT ending length = LENGTH ending; ending length > str length THEN # the ending is longer than the string # FALSE ELSE # the string is at least as long as the ending # str[ ( str length - ending length ) + 1 : AT 1 ] = ending FI # ENDSWITH # ;
- returns str cnverted to upper case #
OP TOUPPER = ( STRING str )STRING:
BEGIN STRING result := str; FOR s pos FROM LWB result TO UPB result DO result[ s pos ] := to upper( result[ s pos ] ) OD; result END # TOUPPER # ;
- tests whether file name has one of the extensions and returns #
- the index of the extension in extensions or LWB extensions - 1 #
- if it does not end with one of the extensions #
- the tests are not case-sensitive #
PROC has extension in list = ( STRING file name, []STRING extensions )INT:
BEGIN INT extension number := LWB extensions - 1; STRING upper name = TOUPPER file name; FOR pos FROM LWB extensions TO UPB extensions WHILE extension number < LWB extensions DO IF upper name ENDSWITH ( "." + TOUPPER extensions[ pos ] ) THEN # found the extension # extension number := pos FI OD; extension number END # has extension # ;
- test the has extension in list procedure #
PROC test has extension in list = ( STRING file name, []STRING extensions, BOOL expected result )VOID:
IF INT extension number = has extension in list( file name, extensions ); extension number < LWB extensions THEN # the file does not have one of the extensions # print( ( file name , " does not have an extension in the list " , IF expected result THEN "NOT AS EXPECTED" ELSE "" FI , newline ) ) ELSE # the file does have one of the extensions # print( ( file name , " has extension """ , extensions[ extension number ] , """ " , IF NOT expected result THEN "NOT AS EXPECTED" ELSE "" FI , newline ) ) FI # test has extension in list # ;
- the extensions for the task #
[]STRING task extensions = ( "zip", "rar", "7z", "gz", "archive", "A##" );
- test the file names in the standard task #
test has extension in list( "MyData.a##", task extensions, TRUE ); test has extension in list( "MyData.tar.Gz", task extensions, TRUE ); test has extension in list( "MyData.gzip", task extensions, FALSE ); test has extension in list( "MyData.7z.backup", task extensions, FALSE ); test has extension in list( "MyData...", task extensions, FALSE ); test has extension in list( "MyData", task extensions, FALSE );
- the extensions for the extra credit #
[]STRING ec extensions = ( "zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2" );
- test the file names in the extra credit #
test has extension in list( "MyData_v1.0.tar.bz2", ec extensions, TRUE ); test has extension in list( "MyData_v1.0.bz2", ec extensions, FALSE )</lang>
- Output:
MyData.a## has extension "A##" MyData.tar.Gz has extension "gz" MyData.gzip does not have an extension in the list MyData.7z.backup does not have an extension in the list MyData... does not have an extension in the list MyData does not have an extension in the list MyData_v1.0.tar.bz2 has extension "tar.bz2" MyData_v1.0.bz2 does not have an extension in the list
Arturo
<lang rebol>fileExtensions: map ["zip" "rar" "7z" "gz" "archive" "A##"] => ["." ++ lower]
hasExtension?: function [file][
in? extract.extension lower file fileExtensions
]
files: ["MyData.a##" "MyData.tar.Gz" "MyData.gzip" "MyData.7z.backup" "MyData..." "MyData"]
loop files 'file ->
print [file "=> hasExtension?:" hasExtension? file]</lang>
- Output:
MyData.a## => hasExtension?: true MyData.tar.Gz => hasExtension?: true MyData.gzip => hasExtension?: false MyData.7z.backup => hasExtension?: false MyData... => hasExtension?: false MyData => hasExtension?: false
AWK
This solution meets the extended criteria stated in the problem.
<lang AWK>
- syntax: GAWK -f FILE_EXTENSION_IS_IN_EXTENSIONS_LIST.AWK
BEGIN {
n = split("zip,rar,7z,gz,archive,A##,tar.bz2", arr, ",") for (i=1; i<=n; i++) { ext_arr[tolower(arr[i])] = "" } filenames = "MyData.a##,MyData.tar.Gz,MyData.gzip,MyData.7z.backup,MyData...,MyData,MyData_v1.0.tar.bz2,MyData_v1.0.bz2" n = split(filenames, fn_arr, ",") for (i=1; i<=n; i++) { ext_found = "" for (ext in ext_arr) { if (tolower(fn_arr[i]) ~ (".*\\." ext "$")) { ext_found = ext break } } ans = (ext_found == "") ? "is not in list" : ("is in list: " ext_found) printf("%s extension %s\n", fn_arr[i], ans) } exit(0)
}</lang>
- Output:
MyData.a## extension is in list: a## MyData.tar.Gz extension is in list: gz MyData.gzip extension is not in list MyData.7z.backup extension is not in list MyData... extension is not in list MyData extension is not in list MyData_v1.0.tar.bz2 extension is in list: tar.bz2 MyData_v1.0.bz2 extension is not in list
Batch File
This solution does not contain support for dots in extension names. <lang dos> @echo off setlocal enabledelayedexpansion
set "extensions=.zip .rar .7z .gz .archive .A##"
- loop
if "%~1"=="" exit /b set onlist=0
for %%i in (%extensions%) do if /i "%~x1"=="%%i" set onlist=1
if %onlist%==1 (
echo Filename: "%~1" ^| Extension: "%~x1" ^| TRUE
) else (
echo Filename: "%~1" ^| Extension: "%~x1" ^| FALSE
)
shift goto loop </lang>
- Output:
Filename: "MyData.a##" | Extension: ".a##" | TRUE Filename: "MyData.tar.Gz" | Extension: ".Gz" | TRUE Filename: "MyData.gzip" | Extension: ".gzip" | FALSE Filename: "MyData.7z.backup" | Extension: ".backup" | FALSE Filename: "MyData..." | Extension: "" | FALSE Filename: "MyData" | Extension: "" | FALSE
C
C: dots allowed
There is no magic in extensions: they are just trailing characters in names. <lang c>/*
* File extension is in extensions list (dots allowed). * * This problem is trivial because the so-called extension is simply the end * part of the name. */
- define _CRT_SECURE_NO_WARNINGS
- include <stdio.h>
- include <stdlib.h>
- include <ctype.h>
- include <locale.h>
- include <string.h>
- ifdef _Bool
- include <stdbool.h>
- else
- define bool int
- define true 1
- define false 0
- endif
/*
* The implemented algorithm is not the most efficient one: for N extensions * of length M it has the cost O(N * M). */
int checkFileExtension(char* fileName, char* fileExtensions) {
char* fileExtension = fileExtensions;
if ( *fileName ) { while ( *fileExtension ) { int fileNameLength = strlen(fileName); int extensionLength = strlen(fileExtension); if ( fileNameLength >= extensionLength ) { char* a = fileName + fileNameLength - extensionLength; char* b = fileExtension; while ( *a && toupper(*a++) == toupper(*b++) ) ; if ( !*a ) return true; } fileExtension += extensionLength + 1; } } return false;
}
void printExtensions(char* extensions) {
while( *extensions ) { printf("%s\n", extensions); extensions += strlen(extensions) + 1; }
}
bool test(char* fileName, char* extension, bool expectedResult) {
bool result = checkFileExtension(fileName,extension); bool returnValue = result == expectedResult; printf("%20s result: %-5s expected: %-5s test %s\n", fileName, result ? "true" : "false", expectedResult ? "true" : "false", returnValue ? "passed" : "failed" ); return returnValue;
}
int main(void) {
static char extensions[] = ".zip\0.rar\0.7z\0.gz\0.archive\0.A##\0.tar.bz2\0";
setlocale(LC_ALL,"");
printExtensions(extensions); printf("\n");
if ( test("MyData.a##", extensions,true ) && test("MyData.tar.Gz", extensions,true ) && test("MyData.gzip", extensions,false) && test("MyData.7z.backup", extensions,false) && test("MyData...", extensions,false) && test("MyData", extensions,false) && test("MyData_v1.0.tar.bz2",extensions,true ) && test("MyData_v1.0.bz2", extensions,false) && test("filename", extensions,false) ) printf("\n%s\n", "All tests passed."); else printf("\n%s\n", "Last test failed.");
printf("\n%s\n", "press enter"); getchar(); return 0;
}</lang>
- Output:
.zip .rar .7z .gz .archive .A## .tar.bz2 MyData.a## result: true expected: true test passed MyData.tar.Gz result: true expected: true test passed MyData.gzip result: false expected: false test passed MyData.7z.backup result: false expected: false test passed MyData... result: false expected: false test passed MyData result: false expected: false test passed MyData_v1.0.tar.bz2 result: true expected: true test passed MyData_v1.0.bz2 result: false expected: false test passed filename result: false expected: false test passed All tests passed. press enter
C: another solution
According to this, an extension is whatever comes after the last dot. Dotless filename won't match anything.
<lang c>#include <stdio.h>
- include <string.h>
- include <stdbool.h>
/* this should be the way we check if we can use posix/bsd strcasecmp */
- if !defined(_BSD_SOURCE) && !defined(_DEFAULT_SOURCE)
- include <ctype.h>
int strcasecmp(const char *s1, const char *s2) {
for(; tolower(*s1) == tolower(*s2); ++s1, ++s2) if(*s1 == 0) return 0; return *(unsigned char *)s1 < *(unsigned char *)s2 ? -1 : 1;
}
- else
- include <strings.h>
- endif
bool ext_is_in_list(const char *filename, const char *extlist[])
{
size_t i;
const char *ext = strrchr(filename, '.'); if (ext) { for (i = 0; extlist[i] != NULL; ++i) { if (strcasecmp(ext, extlist[i]) == 0)
return true;
} }
return false;
}
// testing
const char *fnames[] = {
"text.txt", "text.TXT", "test.tar.gz", "test/test2.exe", "test\\test2.exe", "test", "a/b/c\\d/foo", "foo.c", "foo.C", "foo.C++", "foo.c#", "foo.zkl", "document.pdf", NULL
};
const char *exts[] = {
".txt", ".gz", ".bat", ".c", ".c++", ".exe", ".pdf", NULL
};
int main(void) {
size_t i;
for (i = 0; fnames[i]; ++i) { printf("%s: %s\n", fnames[i],
ext_is_in_list(fnames[i], exts) ? "yes" : "no");
}
return 0;
} </lang>
C++
This solution allows extensions to contain dots. <lang cpp>#include <algorithm>
- include <cctype>
- include <iomanip>
- include <iostream>
- include <string>
- include <vector>
bool endsWithIgnoreCase(const std::string& str, const std::string& suffix) {
const size_t n1 = str.length(); const size_t n2 = suffix.length(); if (n1 < n2) return false; return std::equal(str.begin() + (n1 - n2), str.end(), suffix.begin(), [](char c1, char c2) { return std::tolower(static_cast<unsigned char>(c1)) == std::tolower(static_cast<unsigned char>(c2)); });
}
bool filenameHasExtension(const std::string& filename,
const std::vector<std::string>& extensions) { return std::any_of(extensions.begin(), extensions.end(), [&filename](const std::string& extension) { return endsWithIgnoreCase(filename, "." + extension); });
}
void test(const std::string& filename,
const std::vector<std::string>& extensions) { std::cout << std::setw(20) << std::left << filename << ": " << std::boolalpha << filenameHasExtension(filename, extensions) << '\n';
}
int main() {
const std::vector<std::string> extensions{"zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"}; test("MyData.a##", extensions); test("MyData.tar.Gz", extensions); test("MyData.gzip", extensions); test("MyData.7z.backup", extensions); test("MyData...", extensions); test("MyData", extensions); test("MyData_v1.0.tar.bz2", extensions); test("MyData_v1.0.bz2", extensions); return 0;
}</lang>
- Output:
MyData.a## : true MyData.tar.Gz : true MyData.gzip : false MyData.7z.backup : false MyData... : false MyData : false MyData_v1.0.tar.bz2 : true MyData_v1.0.bz2 : false
Clojure
<lang Clojure>(defn matches-extension [ext s]
(re-find (re-pattern (str "\\." ext "$")) (clojure.string/lower-case s)))
(defn matches-extension-list [ext-list s]
(some #(matches-extension % s) ext-list))</lang>
It is assumed that when extensions are "added to the system", they will be "normalized" to the expected (lower) case.
<lang Clojure>(defn normalize-extensions [ext-list]
(map clojure.string/lower-case ext-list))</lang>
- Output:
(def ext-list ["zip" "rar" "7z" "gz" "archive" "A##" "tar.bz2"]) (def exts (normalize-extensions ext-list)) (map (partial matches-extension-list exts) ["MyData.a##" "MyData.tar.Gz" "MyData.gzip" "MyData.7z.backup" "MyData..." "MyData" "MyData_v1.0.tar.bz2" "MyData_v1.0.bz2"]) (".a##" ".gz" nil nil nil nil ".tar.bz2" nil)
D
Variant 1
<lang d> import std.stdio; import std.string; import std.range; import std.algorithm;
void main() {
auto exts = ["zip", "rar", "7z", "gz", "archive", "A##"]; auto filenames = ["MyData.a##", "MyData.tar.Gz", "MyData.gzip", "MyData.7z.backup", "MyData...", "MyData"];
writeln("extensions: ", exts); writeln;
foreach(filename; filenames) { string extension = filename.drop(filename.lastIndexOf(".") + 1).toLower;
bool found; foreach(ext; exts) { if (extension == ext.toLower) { found = true; break; } }
writeln(filename, " : ", found); }
</lang>
- Output:
extensions: ["zip", "rar", "7z", "gz", "archive", "A##"] MyData.a## : true MyData.tar.Gz : true MyData.gzip : false MyData.7z.backup : false MyData... : false MyData : false
Variant 2
<lang d> import std.stdio; import std.string; import std.range; import std.algorithm;
void main() {
auto exts = ["zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"]; auto filenames = ["MyData.a##", "MyData.tar.Gz", "MyData.gzip", "MyData.7z.backup", "MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2"];
writeln("extensions: ", exts);
writeln; foreach(filename; filenames) { bool found; foreach(ext; exts) { if (filename.toLower.endsWith("." ~ ext.toLower)) { found = true; break; } }
writeln(filename, " : ", found); }
}
</lang>
- Output:
extensions: ["zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"] MyData.a## : true MyData.tar.Gz : true MyData.gzip : false MyData.7z.backup : false MyData... : false MyData : false MyData_v1.0.tar.bz2 : true MyData_v1.0.bz2 : false
Delphi
<lang Delphi> program File_extension_is_in_extensions_list;
{$APPTYPE CONSOLE}
uses
System.SysUtils;
const
exts: TArray<string> = ['zip', 'rar', '7z', 'gz', 'archive', 'A##', 'tar.bz2']; filenames: TArray<string> = ['MyData.a##', 'MyData.tar.Gz', 'MyData.gzip', 'MyData.7z.backup', 'MyData...', 'MyData', 'MyData_v1.0.tar.bz2', 'MyData_v1.0.bz2'];
begin
write('extensions: ['); for var ext in exts do begin write(ext, ' '); end; writeln(']'#10);
for var filename in filenames do begin var found := false; for var ext in exts do if (filename.toLower.endsWith('.' + ext.toLower)) then begin found := True; Break; end; writeln(filename: 20, ' : ', found); end;
readln;
end.</lang>
- Output:
extensions: [zip rar 7z gz archive A## tar.bz2 ] MyData.a## : TRUE MyData.tar.Gz : TRUE MyData.gzip : FALSE MyData.7z.backup : FALSE MyData... : FALSE MyData : FALSE MyData_v1.0.tar.bz2 : TRUE MyData_v1.0.bz2 : FALSE
Factor
This solution allows dots in file extensions. <lang factor>USING: formatting kernel qw sequences splitting unicode ; IN: rosetta-code.file-extension-list
CONSTANT: extensions qw{ zip rar 7z gz archive A## tar.bz2 } CONSTANT: filenames qw{
MyData.a## MyData.tar.Gz MyData.gzip MyData.7z.backup MyData... MyData MyData_v1.0.tar.bz2 MyData_v1.0.bz2
}
- ext-in-list? ( filename list -- ? )
[ >lower "." split ] dup [ map ] curry bi* [ tail? t = ] with find nip >boolean ;
extensions "List of file extensions: %[%s, %]\n\n" printf "File extension in extensions list?\n" printf filenames [
dup extensions ext-in-list? "%19s %u\n" printf
] each</lang>
- Output:
List of file extensions: { zip, rar, 7z, gz, archive, A##, tar.bz2 } File extension in extensions list? MyData.a## t MyData.tar.Gz t MyData.gzip f MyData.7z.backup f MyData... f MyData f MyData_v1.0.tar.bz2 t MyData_v1.0.bz2 f
Fortran
The plan is to use the extractor function for file name extensions that was defined in another problem to obtain the extension's text, then use that text to index a character string of approved extensions. These are defined with the period included, but no extension's text can include a period - all start with a period and continue with letters or digits only - so the specification of a list of such items need not mess about with quotes and commas and so forth. The deed is done via function EXTIN(FNAME,LIST), but there is a lot of support stuff in the absence of an existing library to call upon.
When the task was revised to include a # as a possible character in the file name extension part, the scan in FEXT that allowed only certain characters via GOODEXT required changing. One possibility was to increase the size of GOODEXT so as to encompass the three characters in ODDITIES, that includes a #. But it also includes a : (all this is from a different context) and in file names, under DOS, this character is special. So, all-in-all, it seemed better to retreat from exclusions and simply allow all characters, as per the original specification. This done, the function EXTIN that checked that the extension was one of a specified set seemed no longer restricted to file name extensions, so instead it became FOUND(TEXT,LIST) and the period, the only special character now, is used as the delimiter in LIST.
Petty details include the list employing capitals only, as the match is to not distinguish capital from lower case letters, so in the usual way the candidate extension's text is converted to capitals. The list could be subjected to UPCASE, but it is bad form to damage what might be a constant, and one possibly in read-only storage at that. An internal working copy could be made which would then be fed to UPCASE, except that this would be a waste on every invocation. A further trick involves appending a period to the candidate text so that for example ".JP" becomes ".JP." - otherwise a ".JP" would be found in the sequence ".JPG" which would be wrong, so as a result, the list of texts must have a period appended to its last entry, otherwise it would not be findable. Again, this could be done internally, via INDEX(LIST//".",EXT(1:L)//".")
at a run-time cost.
Some systems supply an UPCASE (or similar name) to convert text that hopefully would run faster than this example, which relies on searching for the position in a list of letters. A very common alternative is to calculate using character code numerical values, via something like<lang Fortran> IT = ICHAR(TEXT(I:I)) - ICHAR("a") !More symbols precede "a" than "A".
IF (IT.GE.0 .AND. IT.LE.25) TEXT(I:I) = CHAR(IT + ICHAR("A")) !In a-z? Convert!</lang> except that this relies on the letters having contiguous character codes, and in EBCDIC they don't - other symbols are mixed in. (Honest!) Faster still would be to use the character code to index an array of 256 pre-computed values.
A final annoyance is the presence of trailing spaces because character variables are of fixed size and so must be made "surely long enough" for the longest expectation. This may not cause trouble on output as spaces look just as blank as blank space, but they may well cause trouble in the internal tests. Thus integer function LSTNB reports the last non-blank, and so a test text can be presented with no trailing spaces, as in TEST(I)(1:LSTNB(TEST(I))) or similar. With Fortran 2003, there is a facility for redefining the sizes of character variables on-the-fly so that this problem can be evaded.
The MODULE protocol is employed for the convenience of not having to respecify the type of the functions in every calling routine, and also to facilitate the collection of types of characters. Otherwise, prior to F90 there would have to be various COMMON statements, or routines would each simply respecify whatever character sets they needed.<lang Fortran> MODULE TEXTGNASH !Some text inspection.
CHARACTER*10 DIGITS !Integer only. CHARACTER*11 DDIGITS !With a full stop masquerading as a decimal point. CHARACTER*13 SDDIGITS !Signed decimal digits. CHARACTER*4 EXPONENTISH !With exponent parts. CHARACTER*17 NUMBERISH !The complete mix. CHARACTER*16 HEXLETTERS !Extended for base sixteen. CHARACTER*62 DIGILETTERS !File nameish but no . CHARACTER*26 LITTLELETTERS,BIGLETTERS !These are well-known. CHARACTER*52 LETTERS !The union thereof. CHARACTER*66 NAMEISH !Allowing digits and . and _ as well. CHARACTER*3 ODDITIES !And allow these in names also. CHARACTER*1 CHARACTER(72) !Prepare a work area. EQUIVALENCE !Whose components can be fingered. 1 (CHARACTER( 1),EXPONENTISH,NUMBERISH), !Start with numberish symbols that are not nameish. 2 (CHARACTER( 5),SDDIGITS), !Since the sign symbols are not nameish. 3 (CHARACTER( 7),DDIGITS,NAMEISH), !Computerish names might incorporate digits and a . 4 (CHARACTER( 8),DIGITS,HEXLETTERS,DIGILETTERS), !A proper name doesn't start with a digit. 5 (CHARACTER(18),BIGLETTERS,LETTERS), !Just with a letter. 6 (CHARACTER(44),LITTLELETTERS), !The second set. 7 (CHARACTER(70),ODDITIES) !Tack this on the end. DATA EXPONENTISH /"eEdD"/ !These on the front. DATA SDDIGITS /"+-.0123456789"/ !Any of these can appear in a floating point number. DATA BIGLETTERS /"ABCDEFGHIJKLMNOPQRSTUVWXYZ"/ !Simple. DATA LITTLELETTERS /"abcdefghijklmnopqrstuvwxyz"/ !Subtly different. DATA ODDITIES /"_:#"/ !Allow these in names also. This strains := usage!
CHARACTER*62 GOODEXT !These are all the characters allowed EQUIVALENCE (CHARACTER(8),GOODEXT) !Starts with the first digit. INTEGER MEXT !A fixed bound. PARAMETER (MEXT = 28) !This is perfect. CONTAINS INTEGER FUNCTION LSTNB(TEXT) !Sigh. Last Not Blank.
Concocted yet again by R.N.McLean (whom God preserve) December MM. Code checking reveals that the Compaq compiler generates a copy of the string and then finds the length of that when using the latter-day intrinsic LEN_TRIM. Madness! Can't DO WHILE (L.GT.0 .AND. TEXT(L:L).LE.' ') !Control chars. regarded as spaces. Curse the morons who think it good that the compiler MIGHT evaluate logical expressions fully. Crude GO TO rather than a DO-loop, because compilers use a loop counter as well as updating the index variable. Comparison runs of GNASH showed a saving of ~3% in its mass-data reading through the avoidance of DO in LSTNB alone. Crappy code for character comparison of varying lengths is avoided by using ICHAR which is for single characters only. Checking the indexing of CHARACTER variables for bounds evoked astounding stupidities, such as calculating the length of TEXT(L:L) by subtracting L from L! Comparison runs of GNASH showed a saving of ~25-30% in its mass data scanning for this, involving all its two-dozen or so single-character comparisons, not just in LSTNB.
CHARACTER*(*),INTENT(IN):: TEXT !The bumf. If there must be copy-in, at least there need not be copy back. INTEGER L !The length of the bumf. L = LEN(TEXT) !So, what is it? 1 IF (L.LE.0) GO TO 2 !Are we there yet? IF (ICHAR(TEXT(L:L)).GT.ICHAR(" ")) GO TO 2 !Control chars are regarded as spaces also. L = L - 1 !Step back one. GO TO 1 !And try again. 2 LSTNB = L !The last non-blank, possibly zero. RETURN !Unsafe to use LSTNB as a variable. END FUNCTION LSTNB !Compilers can bungle it.
SUBROUTINE UPCASE(TEXT) !In the absence of an intrinsic...
Converts any lower case letters in TEXT to upper case... Concocted yet again by R.N.McLean (whom God preserve) December MM. Converting from a DO loop evades having both an iteration counter to decrement and an index variable to adjust. Could use the character code to index an array, instead of searching a sequence...
CHARACTER*(*) TEXT !The stuff to be modified. INTEGER I,L,IT !Fingers. L = LEN(TEXT) !Get a local value, in case LEN engages in oddities. I = L !Start at the end and work back.. 1 IF (I.LE.0) RETURN !Are we there yet? Comparison against zero should not require a subtraction. IT = INDEX(LITTLELETTERS,TEXT(I:I)) !Well? IF (IT .GT. 0) TEXT(I:I) = BIGLETTERS(IT:IT) !One to convert? I = I - 1 !Back one. GO TO 1 !Inspect.. END SUBROUTINE UPCASE !Easy. In EBCDIC, letters are NOT contiguous, and other symbols appear.
CHARACTER*(MEXT) FUNCTION FEXT(FNAME) !Return the file extension part. CHARACTER*(*) FNAME !May start with the file's path name blather. INTEGER L1,L2 !Fingers to the text. L2 = LEN(FNAME) !The last character of the file name. L1 = L2 !Starting at the end... 10 IF (L1.GT.0) THEN !Damnit, can't rely on DO WHILE(safe & test) IF (FNAME(L1:L1).NE.".") THEN !So do the two parts explicitly. L1 = L1 - 1 !Well, that was a valid character for an extension. GO TO 10 !So, move back one and try again. END IF !Until a period is found. L1 = L1 - 1 !Here. Thus include the period. GO TO 20 !And escape. END IF !Keep on moving back. L1 = L2 !If we're here, no period was found. 20 FEXT = FNAME(L1 + 1:L2) !The text of the extension. END FUNCTION FEXT !Possibly, blank.
LOGICAL FUNCTION FOUND(TEXT,LIST) !Is TEXT found in the LIST? CHARACTER*(*) TEXT !The text. CHARACTER*(*) LIST !A sequence, separated by the periods. Like ".EXE.TXT.etc." CHARACTER*(LEN(TEXT)) EXT !A scratchpad of sufficient size. L = LSTNB(TEXT) !Find its last non-blank. IF (L.LE.0) THEN !A null text? FOUND = .FALSE. !Yep. Can't be in the list. ELSE !Otherwise, EXT(1:L) = TEXT(1:L) !A copy I can damage. CALL UPCASE(EXT(1:L)) !Simplify. FOUND = INDEX(LIST,EXT(1:L)//".") .GT. 0 !Found somewhere? END IF !The period can't be a character in an extension name. END FUNCTION FOUND !So, possibilities collapse. END MODULE TEXTGNASH !Enough for this.
PROGRAM POKE USE TEXTGNASH INTEGER I,LEX,LFN INTEGER TESTS PARAMETER (TESTS = 12) CHARACTER*80 TEST(TESTS) !A collection. CHARACTER*(MEXT) EXT DATA TEST/ 1 "Picture.jpg", 2 "http://mywebsite.com/picture/image.png", 3 "myuniquefile.longextension", 4 "IAmAFilenameWithoutExtension", 5 "/path/to.my/file", 6 "file.odd_one", 7 "Mydata.a##", 8 "Mydata.tar.Gz", 9 "MyData.gzip", o "MyData.7z.backup", 1 "Mydata...", 2 "Mydata"/ CHARACTER*(*) IMAGE !A sequence of approved texts, delimited by . PARAMETER (IMAGE = ".ZIP.RAR.7Z.GZ.ARCHIVE.A##.") !All in capitals, and ending with a . too.
WRITE (6,1) IMAGE 1 FORMAT ("To note file name extensions that are amongst ",A,/ 1 "File name",40X,"Extension",7X,"Test")
DO I = 1,TESTS !Step through the candidates. LFN = LSTNB(TEST(I)) !Thus do without trailing spaces. EXT = FEXT(TEST(I)(1:LFN)) !Grab the file name's extension text. LEX = LSTNB(EXT) !More trailing spaces. WRITE (6,2) TEST(I)(1:LFN),EXT(1:LEX),FOUND(EXT(1:LEX),IMAGE) 2 FORMAT (A48,A16,L) !Produces tidy columns, aligned right. END DO !On to the next. END
</lang> The previous results were when only "image" style files were approved. The approval is no longer so restrictive.
To note file name extensions that are amongst .ZIP.RAR.7Z.GZ.ARCHIVE.A##. File name Extension Test Picture.jpg .jpg F http://mywebsite.com/picture/image.png .png F myuniquefile.longextension .longextension F IAmAFilenameWithoutExtension F /path/to.my/file .my/file F file.odd_one .odd_one F Mydata.a## .a## T Mydata.tar.Gz .Gz T MyData.gzip .gzip F MyData.7z.backup .backup F Mydata... . F Mydata F
The approval function relies on a period being special and that no extension contains one, as is stated in the specification. Thus, the likes of "tar.bz2" can't be added to the list of approved extensions. To do so would require some way of removing context dependency from within the list of approved tests, for instance by converting it to some sort of list of elements each of which has a length. So, if there were no more than 255 texts in a list, then character one would state their number, followed by the length of the first text (up to 255) then that number of characters, then the length of the second text, and so on. Then function FOUND would be fully general at the price of a more difficult initialisation of its list.
Similarly, the scan of a file name to find the extension part relies on no extension containing a period. If the caller were to determine the text of the extension (rather than using FEXT, which stops with the rightmost period) then whatever results could be presented to function FOUND without difficulty.
Users of Windows systems may have the option "Hide extensions for known file types" unticked, but even so, "shortcut" files will not have their file name extension of .lnk
shown...
Go
This allows extensions to include a dot and, in the case of success, displays the extension matched (ignoring case) in the list. In the case of failure, the actual (minimum) file extension is displayed. <lang go>package main
import (
"fmt" "strings"
)
var extensions = []string{"zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"}
func fileExtInList(filename string) (bool, string) {
filename2 := strings.ToLower(filename) for _, ext := range extensions { ext2 := "." + strings.ToLower(ext) if strings.HasSuffix(filename2, ext2) { return true, ext } } s := strings.Split(filename, ".") if len(s) > 1 { t := s[len(s)-1] if t != "" { return false, t } else { return false, "<empty>" } } else { return false, "<none>" }
}
func main() {
fmt.Println("The listed extensions are:") fmt.Println(extensions, "\n") tests := []string{ "MyData.a##", "MyData.tar.Gz", "MyData.gzip", "MyData.7z.backup", "MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2", } for _, test := range tests { ok, ext := fileExtInList(test) fmt.Printf("%-20s => %-5t (extension = %s)\n", test, ok, ext) }
}</lang>
- Output:
The listed extensions are: [zip rar 7z gz archive A## tar.bz2] MyData.a## => true (extension = A##) MyData.tar.Gz => true (extension = gz) MyData.gzip => false (extension = gzip) MyData.7z.backup => false (extension = backup) MyData... => false (extension = <empty>) MyData => false (extension = <none>) MyData_v1.0.tar.bz2 => true (extension = tar.bz2) MyData_v1.0.bz2 => false (extension = bz2)
Haskell
<lang Haskell>import Data.List import qualified Data.Char as Ch
toLower :: String -> String toLower = map Ch.toLower
isExt :: String -> [String] -> Bool isExt filename extensions = any (`elem` (tails . toLower $ filename)) $ map toLower extensions</lang>
The code defining isExt could be done point free: <lang Haskell>isExt filename = any (`elem` (tails . toLower $ filename)) . map toLower</lang>
Overcoming the one-liner urge on behalf of being more comprehensible would give: <lang Haskell>isExt filename extensions = any (`elem` allTails) lowerExtensions
where allTails = tails . toLower $ filename
lowerExtensions = map toLower extensions</lang>
Given definition handles composite extensions as well.
Testing:
<lang Haskell>main = mapM_ (\f -> putStr(f ++ "\t") >> print (f `isExt` extensions)) files
where files = [ "MyData.a##" , "MyData.tar.Gz" , "MyData.gzip" , "MyData.7z.backup" , "MyData..." , "MyData" , "MyData_v1.0.tar.bz2" , "MyData_v1.0.bz2" ] extensions = ["zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"]</lang>
- Output:
λ> main MyData.a## True MyData.tar.Gz True MyData.gzip True MyData.7z.backup False MyData... False MyData False MyData_v1.0.tar.bz2 True MyData_v1.0.bz2 False
We can also express this directly in terms of the isSuffix function, taking care not to reproduce the small glitch in the draft above, which shows a false positive for zip in .gzip (see task description bullet 2).
<lang haskell>import Data.List (find, isSuffixOf) import Data.Maybe (fromMaybe) import Data.Char (toLower)
extensionFound :: [String] -> String -> Maybe String
extensionFound xs fp = find (`isSuffixOf` fp) (('.' :) <$> xs)
-- TESTS --------------------------------------------------
main :: IO ()
main =
putStrLn $ fTable "Any matching extensions found:\n" id (fromMaybe "n/a") (extensionFound (lcased ["zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"])) (lcased [ "MyData.a##" , "MyData.tar.Gz" , "MyData.gzip" , "MyData.7z.backup" , "MyData..." , "MyData" , "MyData_v1.0.tar.bz2" , "MyData_v1.0.bz2" ])
-- STRINGS ------------------------------------------------
fTable :: String -> (a -> String) -> (b -> String) -> (a -> b) -> [a] -> String fTable s xShow fxShow f xs =
let w = maximum (length . xShow <$> xs) rjust n c = (drop . length) <*> (replicate n c ++) in unlines $ s : fmap (((++) . rjust w ' ' . xShow) <*> ((" -> " ++) . fxShow . f)) xs
lcased :: [String] -> [String] lcased = fmap (fmap toLower)</lang>
- Output:
Any matching extensions found: mydata.a## -> .a## mydata.tar.gz -> .gz mydata.gzip -> n/a mydata.7z.backup -> n/a mydata... -> n/a mydata -> n/a mydata_v1.0.tar.bz2 -> .tar.bz2 mydata_v1.0.bz2 -> n/a
J
Solution: <lang j>isSuffix=: -~&# = {:@I.@E. isExt=: ('.'&,&.>@[ ([: +./ isSuffix&(tolower@>)/) boxopen@])</lang>
Usage: <lang j> Exts=: <;._1 ' zip rar 7z gz archive A## tar.bz2'
TestFiles=: <;._1 ' MyData.a## MyData.tar.Gz MyData.gzip MyData.7z.backup MyData... MyData MyData_v1.0.tar.bz2 MyData_v1.0.bz2' Exts isExt TestFiles
1 1 0 0 0 0 1 0</lang>
Java
<lang java5>import java.util.Arrays; import java.util.Comparator;
public class FileExt{ public static void main(String[] args){ String[] tests = {"text.txt", "text.TXT", "test.tar.gz", "test/test2.exe", "test\\test2.exe", "test", "a/b/c\\d/foo"}; String[] exts = {".txt",".gz","",".bat"};
System.out.println("Extensions: " + Arrays.toString(exts) + "\n");
for(String test:tests){ System.out.println(test +": " + extIsIn(test, exts)); } }
public static boolean extIsIn(String test, String... exts){ int lastSlash = Math.max(test.lastIndexOf('/'), test.lastIndexOf('\\')); //whichever one they decide to use today String filename = test.substring(lastSlash + 1);//+1 to get rid of the slash or move to index 0 if there's no slash
//end of the name if no dot, last dot index otherwise int lastDot = filename.lastIndexOf('.') == -1 ? filename.length() : filename.lastIndexOf('.'); String ext = filename.substring(lastDot);//everything at the last dot and after is the extension
Arrays.sort(exts);//sort for the binary search
return Arrays.binarySearch(exts, ext, new Comparator<String>() { //just use the built-in binary search method @Override //it will let us specify a Comparator and it's fast enough public int compare(String o1, String o2) { return o1.compareToIgnoreCase(o2); } }) >= 0;//binarySearch returns negative numbers when it's not found } } </lang>
- Output:
Extensions: [.txt, .gz, , .bat] text.txt: true text.TXT: true test.tar.gz: true test/test2.exe: false test\test2.exe: false test: true a/b/c\d/foo: true
Using FileNameExtensionFilter
This version is the same as the main version only replace the definition for extIsIn
with:
<lang java5>public static boolean extIsIn(String test, String... exts){
for(int i = 0; i < exts.length; i++){
exts[i] = exts[i].replaceAll("\\.", "");
}
return (new FileNameExtensionFilter("extension test", exts)).accept(new File(test));
}</lang>
It would be one line if not for the dot requirement. FileNameExtensionFilter
requires that the extensions have no dots. It also requires that the extensions contain characters (i.e. not the empty string) so that test would need to be removed.
jq
<lang jq># Input: filename
- Output: if the filename ends with one of the extensions (ignoring case), output that extension; else output null.
- Assume that the list of file extensions consists of lower-case strings, including a leading period.
def has_extension(list):
def ascii_downcase: explode | map( if 65 <= . and . <= 90 then . + 32 else . end) | implode; rindex(".") as $ix | if $ix then (.[$ix:] | ascii_downcase) as $ext | if list | index($ext) then $ext else null end else null end;</lang>
Examples: <lang jq>("c:", "txt", "text.txt", "text.TXT", "foo.c", "foo.C++", "document.pdf") | has_extension([".txt", ".c"]) as $ext | if $ext then "\(.) has extension \($ext)"
else "\"\(.)\" does not have an admissible file extension" end</lang>
- Output:
<lang jq>$ jq -r -n -f File_extension_is_in_extensions_list.jq "c:" does not have an admissible file extension "txt" does not have an admissible file extension text.txt has extension .txt text.TXT has extension .txt foo.c has extension .c "foo.C++" does not have an admissible file extension "document.pdf" does not have an admissible file extension</lang>
Julia
<lang julia>isext(filename, extensions) = any(x -> endswith(lowercase(filename), lowercase(x)), "." .* extensions)
- Test
extensions = ["zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"] for f in ["MyData.a##", "MyData.tar.Gz", "MyData.gzip", "MyData.7z.backup", "MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2"]
@printf("%20s : %5s\n", f, isext(f, extensions))
end</lang>
- Output:
MyData.a## : true MyData.tar.Gz : true MyData.gzip : false MyData.7z.backup : false MyData... : false MyData : false MyData_v1.0.tar.bz2 : true MyData_v1.0.bz2 : false
Kotlin
<lang scala>// version 1.1
/* implicitly allows for extensions containing dots */ fun String.isFileExtensionListed(extensions: List<String>): Boolean {
return extensions.any { toLowerCase().endsWith("." + it.toLowerCase()) }
}
fun main(args: Array<String>) {
val extensions = listOf("zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2") val fileNames = listOf( "MyData.a##", "MyData.tar.Gz", "MyData.gzip", "MyData.7z.backup", "MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2" )
for (fileName in fileNames) { println("${fileName.padEnd(19)} -> ${fileName.isFileExtensionListed(extensions)}") }
}</lang>
- Output:
MyData.a## -> true MyData.tar.Gz -> true MyData.gzip -> false MyData.7z.backup -> false MyData... -> false MyData -> false MyData_v1.0.tar.bz2 -> true MyData_v1.0.bz2 -> false
Lua
<lang lua>-- Data declarations local extentions = {"zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"} local testCases = {
"MyData.a##", "MyData.tar.Gz", "MyData.gzip", "MyData.7z.backup", "MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2"
}
-- Return boolean of whether example has a file extension found in extList function extMatch (extList, example)
for _, extension in pairs(extList) do if example:lower():match("%." .. extension:lower() .. "$") then return true end end return false
end
-- Main procedure for _, case in pairs(testCases) do
print(case .. ": " .. tostring(extMatch(extentions, case)))
end</lang>
- Output:
MyData.a##: true MyData.tar.Gz: true MyData.gzip: false MyData.7z.backup: false MyData...: false MyData: false MyData_v1.0.tar.bz2: true MyData_v1.0.bz2: false
Mathematica / Wolfram Language
<lang Mathematica>ClearAll[CheckExtension] CheckExtension[fn_String, e : {_String ..}] := StringMatchQ[ToLowerCase[FileExtension[fn]], Alternatives @@ ToLowerCase[e]] exts = {"zip", "rar", "7z", "gz", "archive", "A##"}; CheckExtension["MyData.a##", exts] CheckExtension["MyData.tar.gz", exts] CheckExtension["MyData.gzip", exts] CheckExtension["MyData.7z.backup", exts] CheckExtension["MyData..", exts] CheckExtension["MyData", exts]</lang>
- Output:
True True False False False False
Nim
Task
For the task, it is possible to use the “splitFile” procedure from the standard module “os” as it split the extension at the last dot.
To build the extension list, we can use a compile time function: <lang Nim>import os, strutils
let fileNameList = ["MyData.a##", "MyData.tar.Gz", "MyData.gzip",
"MyData.7z.backup", "MyData...", "MyData"]
func buildExtensionList(extensions: varargs[string]): seq[string] {.compileTime.} =
for ext in extensions: result.add('.' & ext.toLowerAscii())
const ExtList = buildExtensionList("zip", "rar", "7z", "gz", "archive", "A##")
for fileName in fileNameList:
echo fileName, " → ", fileName.splitFile().ext.toLowerAscii() in ExtList</lang>
Another way consists to use “mapIt” from standard module “sequtils”: <lang Nim>import os, sequtils, strutils
let fileNameList = ["MyData.a##", "MyData.tar.Gz", "MyData.gzip",
"MyData.7z.backup", "MyData...", "MyData"]
const ExtList = mapIt(["zip", "rar", "7z", "gz", "archive", "A##"], '.' & it.toLowerAscii())
for fileName in fileNameList:
echo fileName, " → ", fileName.splitFile().ext.toLowerAscii() in ExtList</lang>
- Output:
MyData.a## → true MyData.tar.Gz → true MyData.gzip → false MyData.7z.backup → false MyData... → false MyData → false
Extra task
The “splitFile” procedure no longer works in this case. We have to use “endsWith” from the “strutils” module, which changes the logic:
<lang nim>import strutils, sequtils
let fileNameList = ["MyData.a##", "MyData.tar.Gz", "MyData.gzip",
"MyData.7z.backup", "MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2"]
const ExtList = mapIt(["zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"], '.' & it.toLowerAscii())
for fileName in fileNameList:
echo fileName, " → ", ExtList.anyIt(fileName.toLowerAscii().endsWith(it))</lang>
- Output:
MyData.a## → true MyData.tar.Gz → true MyData.gzip → false MyData.7z.backup → false MyData... → false MyData → false MyData_v1.0.tar.bz2 → true MyData_v1.0.bz2 → false
Objeck
<lang objeck> class FileExtension {
function : Main(args : String[]) ~ Nil { files := ["MyData.a##", "MyData.tar.Gz", "MyData.gzip", "MyData.7z.backup", "MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2"]; exts := ["zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"]; each(i : files) { HasExt(files[i], exts); }; }
function : HasExt(file : String, exts : String[]) ~ Nil { full_file := file->ToLower(); each(i : exts) { full_ext := "."; full_ext += exts[i]->ToLower(); if(full_file->EndsWith(full_ext)) {
IO.Console->Print(file)->Print(" has extension \"")->Print(exts[i])->PrintLine("\"");
return; }; };
IO.Console->Print(file)->PrintLine(" does not have an extension in the list"); }
}</lang>
- Output:
MyData.a## has extension "A##" MyData.tar.Gz has extension "gz" MyData.gzip does not have an extension in the list MyData.7z.backup does not have an extension in the list MyData... does not have an extension in the list MyData does not have an extension in the list MyData_v1.0.tar.bz2 has extension "tar.bz2" MyData_v1.0.bz2 does not have an extension in the list
PARI/GP
The examples were taken from the AWK code.
<lang parigp>lower(s)= {
my(v=Vecsmall(s)); for(i=1,#v, if(v[i]<91 && v[i]>64, v[i]+=32) ); \\Strchr(v); \\ Use to return a string rather than a t_VECSMALL v;
} checkExt(ext, file)= {
ext=apply(lower,ext); my(v=lower(file),e); for(i=1,#ext, e=ext[i]; if(#v>#e && v[#v-#e+1..#v]==e && v[#v-#e]==46, return(1) ) );
} ext=["txt","gz","bat","c","c++","exe","pdf"]; filenames=["c:","txt","text.txt","text.TXT","test.tar.gz","test/test2.exe","test","foo.c","foo.C","foo.C++","foo.c#","foo.zkl","document.pdf"]; select(f -> checkExt(ext, f), filenames)</lang>
- Output:
%1 = ["text.txt", "text.TXT", "test.tar.gz", "test/test2.exe", "foo.c", "foo.C", "foo.C++", "document.pdf"]
Perl
Does the extra credit requirement.
<lang perl>sub check_extension {
my ($filename, @extensions) = @_; my $extensions = join '|', map quotemeta, @extensions; scalar $filename =~ / \. (?: $extensions ) $ /xi
}</lang>
Testing: <lang perl>my @extensions = ('zip', 'rar', '7z', 'gz', 'archive', 'A##', 'tar.bz2'); my @files= (
'MyData.a##', 'MyData.tar.Gz', 'MyData.gzip', 'MyData.7z.backup', 'MyData...', 'MyData', 'MyData_v1.0.tar.bz2', 'MyData_v1.0.bz2'
); printf "%-19s - %s\n",
$_, check_extension($_, @extensions) ? 'true' : 'false' for @files;</lang>
- Output:
MyData.a## - true MyData.tar.Gz - true MyData.gzip - false MyData.7z.backup - false MyData... - false MyData - false MyData_v1.0.tar.bz2 - true MyData_v1.0.bz2 - false
PHP
This solution does support the extra credit in the task
<lang php> $allowed = ['zip', 'rar', '7z', 'gz', 'archive', 'A##', 'tar.bz2']; $lc_allowed = array_map('strtolower', $allowed);
$tests = [
['MyData.a##',true], ['MyData.tar.Gz',true], ['MyData.gzip',false], ['MyData.7z.backup',false], ['MyData...',false], ['MyData',false], ['archive.tar.gz', true]
];
foreach ($tests as $test) {
$ext = pathinfo($test[0], PATHINFO_EXTENSION); if (in_array(strtolower($ext), $lc_allowed)) { $result = 'true'; } else { $result = 'false'; } printf("%20s : %s \n", $test[0],$result);
} </lang>
- Output:
MyData.a## : true MyData.tar.Gz : true MyData.gzip : false MyData.7z.backup : false MyData... : false MyData : false archive.tar.gz : true
Phix
Note there is builtin, however get_file_extension("MyData_v1.0.tar.bz2") yields "bz2", since it scans right-to-left for the '.', and also it also yields "so" for "libglfw.so.3.1" (it saves the "1", and the "3", but when they are all-number it carries on scanning left and replaces if it finds another '.'). So to match the task requirements more precisely we shall write a custom version. <lang Phix>constant extensions = lower({"zip","rar","7z","gz","archive","A##","tar.bz2"})
global function get_known_extension(string filename)
filename = get_file_name(filename) for i=1 to length(filename) do if filename[i]='.' then string extension = lower(filename[i+1..$]) if find(extension,extensions) then return extension end if end if end for return ""
end function
constant tests = {"MyData.a##",
"MyData.tar.Gz", "MyData.gzip", "MyData.7z.backup", "MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2"}
for i=1 to length(tests) do
string ti = tests[i], ext = get_known_extension(ti) printf(1,"%-20s %-10s %s\n",{ti,ext,{"true","false"}[2-(find(ext,extensions)!=0)]})
end for</lang>
- Output:
MyData.a## a## true MyData.tar.Gz gz true MyData.gzip false MyData.7z.backup false MyData... false MyData false MyData_v1.0.tar.bz2 tar.bz2 true MyData_v1.0.bz2 false
Python
<lang Python> def isExt(fileName, extensions):
return True in map(fileName.lower().endswith, ("." + e.lower() for e in extensions))
</lang>
and we could also enrich the return value to a Maybe option type, returning Nothing if no file extension match is found, or Just the particular extension, if a match is found:
<lang python>Check for a specific set of file extensions
- extensionFound :: [Extension] -> FileName -> Maybe Extension
def extensionFound(xs):
Nothing if no matching extension is found, or Just the extension (drawn from xs, and a suffix of the filename, immediately following a dot character). return lambda fn: find(fn.lower().endswith)( ['.' + x.lower() for x in xs] )
- TEST ----------------------------------------------------
- main :: IO ()
def main():
Check filenames for a particular set of extensions.
# checkExtension :: FileName -> Maybe Extension def checkExtension(fn): return extensionFound([ 'zip', 'rar', '7z', 'gz', 'archive', 'A##', 'tar.bz2' ])(fn)
print( fTable(__doc__ + ':\n')(str)(str)( compose(fromMaybe('n/a'))(checkExtension) )([ 'MyData.a##', 'MyData.tar.Gz', 'MyData.gzip', 'MyData.7z.backup', 'MyData...', 'MyData', 'MyData_v1.0.tar.bz2', 'MyData_v1.0.bz2' ]) )
- GENERIC -------------------------------------------------
- Just :: a -> Maybe a
def Just(x):
Constructor for an inhabited Maybe (option type) value. return {'type': 'Maybe', 'Nothing': False, 'Just': x}
- Nothing :: Maybe a
def Nothing():
Constructor for an empty Maybe (option type) value. return {'type': 'Maybe', 'Nothing': True}
- compose (<<<) :: (b -> c) -> (a -> b) -> a -> c
def compose(g):
Right to left function composition. return lambda f: lambda x: g(f(x))
- find :: (a -> Bool) -> [a] -> Maybe a
def find(p):
Just the first element in the list that matches p, or Nothing if no elements match. def go(xs): for x in xs: if p(x): return Just(x) return Nothing() return lambda xs: go(xs)
- fromMaybe :: a -> Maybe a -> a
def fromMaybe(x):
The default value x if mb is Nothing, or the value contained in mb. return lambda mb: x if ( mb.get('Nothing') ) else mb.get('Just')
- DISPLAY -------------------------------------------------
- fTable :: String -> (a -> String) ->
- (b -> String) -> (a -> b) -> [a] -> String
def fTable(s):
Heading -> x display function -> fx display function -> f -> xs -> tabular string. def go(xShow, fxShow, f, xs): ys = [xShow(x) for x in xs] w = max(map(len, ys)) return s + '\n' + '\n'.join(map( lambda x, y: y.rjust(w, ' ') + ' -> ' + fxShow(f(x)), xs, ys )) return lambda xShow: lambda fxShow: lambda f: lambda xs: go( xShow, fxShow, f, xs )
- MAIN ---
if __name__ == '__main__':
main()</lang>
- Output:
Check for a specific set of file extensions: MyData.a## -> .a## MyData.tar.Gz -> .gz MyData.gzip -> n/a MyData.7z.backup -> n/a MyData... -> n/a MyData -> n/a MyData_v1.0.tar.bz2 -> .tar.bz2 MyData_v1.0.bz2 -> n/a
Racket
<lang racket>
- lang racket
(define extensions '(".zip"
".rar" ".7z" ".gz" ".archive" ".a##" ".tar.bz2"))
(define filenames '("MyData.a##"
"MyData.tar.Gz" "MyData.gzip" "MyData.7z.backup" "MyData..." "MyData" "MyData_v1.0.tar.bz2" "MyData_v1.0.bz2"))
(define (string-right s n)
(if (< (string-length s) n) s (substring s (- (string-length s) n))))
(define (file-extension-in-list? f lst)
(let ([lcase (string-downcase f)]) (ormap (lambda (x) (equal? (string-right lcase (string-length x)) x)) extensions)))
(for ((f (in-list filenames)))
(printf "~a ~a~%" (~a #:width 20 f) (file-extension-in-list? f extensions)))
</lang>
- Output:
MyData.a## #t MyData.tar.Gz #t MyData.gzip #f MyData.7z.backup #f MyData... #f MyData #f MyData_v1.0.tar.bz2 #t MyData_v1.0.bz2 #f
Raku
(formerly Perl 6)
Does the extra credit requirement.
<lang perl6>sub check-extension ($filename, *@extensions) {
so $filename ~~ /:i '.' @extensions $/
}
- Testing:
my @extensions = <zip rar 7z gz archive A## tar.bz2>; my @files= <
MyData.a## MyData.tar.Gz MyData.gzip MyData.7z.backup MyData... MyData MyData_v1.0.tar.bz2 MyData_v1.0.bz2
>; say "{$_.fmt: '%-19s'} - {check-extension $_, @extensions}" for @files;</lang>
- Output:
MyData.a## - True MyData.tar.Gz - True MyData.gzip - False MyData.7z.backup - False MyData... - False MyData - False MyData_v1.0.tar.bz2 - True MyData_v1.0.bz2 - False
REXX
This REXX version handles the extra credit requirement. <lang rexx>/*REXX pgm displays if a filename has a known extension (as per a list of extensions). */ $= 'zip rar 7z gz archive A## tar.bz2'; upper $ /*a list of "allowable" file extensions*/ parse arg fn /*obtain optional argument from the CL.*/ @.= /*define the default for the @. array.*/ if fn\= then @.1 = strip(fn) /*A filename specified? Then use it. */
else do; @.1 = "MyData.a##" /*No " " Else use list*/ @.2 = "MyData.tar.Gz" @.3 = "MyData.gzip" @.4 = "MyData.7z.backup" @.5 = "MyData..." @.6 = "MyData" @.7 = "MyData_v1.0.tar.bz2" @.8 = "MyData_v1.0.bz2" end
- = words($)
do j=1 while @.j\==; @@= @.j; upper @@ /*traipse through @ file extension list*/ do k=1 for # until right(@@, L)==x /*Search $ list, is extension in list? */ x= . || word($, k); L=length(x) /*construct the extension of the file. */ end /*k*/ /* [↓] display file, and a nay or yea.*/ say right(@.j, 40) ' ' right( word( "false true", 1 + (k<=#) ), 5) end /*j*/ /*stick a fork in it, we're all done. */</lang>
- output when using the default input:
MyData.a## true MyData.tar.Gz true MyData.gzip false MyData.7z.backup false MyData... false MyData false MyData_v1.0.tar.bz2 true MyData_v1.0.bz2 false
Ring
<lang ring>
- Project : File extension is in extensions list
extensions = [".zip", ".rar", ".7z", ".gz", ".archive", ".a##", ".tar.bz2"]
filenames = ["MyData.a##", "MyData.tar.gz", "MyData.gzip", "MyData.7z.backup",
"MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2"]
for n = 1 to len(filenames)
flag = 0 for m = 1 to len(extensions) if right(filenames[n], len(extensions[m])) = extensions[m] flag = 1 see filenames[n] + " -> " + extensions[m] + " -> " + " true" + nl exit ok next if flag = 0 see filenames[n] + " -> " + "false" + nl ok
next </lang> Output:
MyData.a## -> .a## -> true MyData.tar.gz -> .gz -> true MyData.gzip -> false MyData.7z.backup -> false MyData... -> false MyData -> false MyData_v1.0.tar.bz2 -> .tar.bz2 -> true MyData_v1.0.bz2 -> false
Ruby
<lang ruby>def is_ext(filename, extensions)
if filename.respond_to?(:each) filename.each do |fn| is_ext(fn, extensions) end else fndc = filename.downcase extensions.each do |ext| bool = fndc.end_with?(?. + ext.downcase) puts "%20s : %s" % [filename, bool] if bool end end
end </lang>
- Output:
is_ext ['MyData.a##', 'MyData.tar.Gz', 'MyData.gzip', 'MyData.7z.backup', 'MyData...', 'MyData', 'MyData.tar.bz2'], %w(zip rar 7z gz archive A## tar.bz2) #=> MyData.a## : true MyData.tar.Gz : true MyData.tar.bz2 : true
Rust
Does extra credit. <lang Rust>fn main() {
let exts = ["zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"]; let filenames = [ "MyData.a##", "MyData.tar.Gz", "MyData.gzip", "MyData.7z.backup", "MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2", ];
println!("extenstions: {:?}\n", exts);
for filename in filenames.iter() { let check = exts.iter().any(|ext| { filename .to_lowercase() .ends_with(&format!(".{}", ext.to_lowercase())) }); println!("{:20} {}", filename, check); }
} </lang>
- Output:
extensions: ["zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"] MyData.a## true MyData.tar.Gz true MyData.gzip false MyData.7z.backup false MyData... false MyData false MyData_v1.0.tar.bz2 true MyData_v1.0.bz2 false
Scala
<lang Scala> def isExt(fileName: String, extensions: List[String]): Boolean = {
extensions.map { _.toLowerCase }.exists { fileName.toLowerCase endsWith "." + _ } }
</lang>
Sidef
<lang ruby>func check_extension(filename, extensions) {
filename ~~ Regex('\.(' + extensions.map { .escape }.join('|') + ')\z', :i)
}</lang>
Testing: <lang ruby>var extensions = ['zip', 'rar', '7z', 'gz', 'archive', 'A##', 'tar.bz2']
var files = [
'MyData.a##', 'MyData.tar.Gz', 'MyData.gzip', 'MyData.7z.backup', 'MyData...', 'MyData', 'MyData_v1.0.tar.bz2', 'MyData_v1.0.bz2'
]
for file in files {
printf("%-19s - %s\n", file, check_extension(file, extensions))
}</lang>
- Output:
MyData.a## - true MyData.tar.Gz - true MyData.gzip - false MyData.7z.backup - false MyData... - false MyData - false MyData_v1.0.tar.bz2 - true MyData_v1.0.bz2 - false
Tcl
<lang tcl>
- This example includes the extra credit.
- With a slight variation, a matching suffix can be identified.
- Note that suffixes with two or more dots (ie a dot in suffix) are checked for each case.
- This way, filename.1.txt will match for txt, and filename3.tar.gz.1 will match for tar.gz.1 for example.
- Example input data:
set f_list [list \
"MyData.a##" \ MyData.tar.Gz \ MyData.gzip \ MyData.7z.backup \ "MyData..." \ MyData \ MyData_v1.0.tar.bz2 \ MyData_v1.0.bz2 ]
set suffix_input_list [list zip rar 7z gz archive "A##" tar.bz2 ]
- Prefix a dot to any suffix that does not begin with a dot.
set suffix_list [list ] foreach s $suffix_input_list {
if { [string range $s 0 0] ne "." } { set s2 "." } else { set s2 "" } append s2 $s lappend suffix_list [string tolower $s2]
}
- Check each filename
foreach filename0 $f_list {
set filename1 [string tolower [file tail $filename0]] set suffix1 [file extension $filename1] set file_suffix_list [list $suffix1] set filename2 [file rootname $filename1] set i 0 # i is an infinite loop breaker. In case there is some unforseen case.. while { $filename2 ne "" && $filename2 ne $filename1 && $i < 32} { # Another suffix is possible set suffix2 [file extension $filename2] if { $suffix2 ne "" } { # found another suffix append suffix2 $suffix1 lappend file_suffix_list $suffix2 } set suffix1 $suffix2 set filename1 $filename2 set filename2 [file rootname $filename2] incr i } set a_suffix_found_p 0 foreach file_suffix $file_suffix_list { if { $file_suffix in $suffix_list } { set a_suffix_found_p 1 } } puts -nonewline "${filename0}\t" if { $a_suffix_found_p } { puts "true" } else { puts "false" }
}
</lang>
- Output:
MyData.a## true MyData.tar.Gz true MyData.gzip false MyData.7z.backup false MyData... false MyData false MyData_v1.0.tar.bz2 true MyData_v1.0.bz2 false
Wren
<lang ecmascript>import "/str" for Str import "/fmt" for Fmt
var exts = ["zip", "rar", "7z", "gz", "archive", "A##", "tar.bz2"]
var tests = [
"MyData.a##", "MyData.tar.Gz", "MyData.gzip" , "MyData.7z.backup", "MyData...", "MyData", "MyData_v1.0.tar.bz2", "MyData_v1.0.bz2"
]
var ucExts = exts.map { |e| "." + Str.upper(e) } for (test in tests) {
var ucTest = Str.upper(test) var hasExt = false var i = 0 for (ext in ucExts) { hasExt = ucTest.endsWith(ext) if (hasExt) { Fmt.print("$-20s $s (extension: $s)", test, hasExt, exts[i]) break } i = i + 1 } if (!hasExt) Fmt.print("$-20s $-5s", test, hasExt)
}</lang>
- Output:
MyData.a## true (extension: A##) MyData.tar.Gz true (extension: gz) MyData.gzip false MyData.7z.backup false MyData... false MyData false MyData_v1.0.tar.bz2 true (extension: tar.bz2) MyData_v1.0.bz2 false
zkl
<lang zkl>fcn hasExtension(fnm){
var [const] extensions=T(".zip",".rar",".7z",".gz",".archive",".a##"); nm,ext:=File.splitFileName(fnm)[-2,*].apply("toLower"); if(extensions.holds(ext)) True; else if(ext==".bz2" and ".tar"==File.splitFileName(nm)[-1]) True; else False
} nms:=T("MyData.a##","MyData.tar.Gz","MyData.gzip","MyData.7z.backup",
"MyData...","MyData", "MyData_v1.0.tAr.bz2","MyData_v1.0.bz2");
foreach nm in (nms){ println("%20s : %s".fmt(nm,hasExtension(nm))); }</lang>
- Output:
MyData.a## : True MyData.tar.Gz : True MyData.gzip : False MyData.7z.backup : False MyData... : False MyData : False MyData_v1.0.tAr.bz2 : True MyData_v1.0.bz2 : False
- File System Operations
- String manipulation
- Programming Tasks
- Solutions by Programming Task
- 11l
- Action!
- ALGOL 68
- Arturo
- AWK
- Batch File
- C
- C++
- Clojure
- D
- Delphi
- System.SysUtils
- Factor
- Fortran
- Go
- Haskell
- J
- Java
- Jq
- Jq examples needing attention
- Examples needing attention
- Julia
- Kotlin
- Lua
- Mathematica
- Wolfram Language
- Nim
- Objeck
- PARI/GP
- PARI/GP examples needing attention
- Perl
- PHP
- Phix
- Python
- Racket
- Raku
- REXX
- Ring
- Ruby
- Rust
- Scala
- Sidef
- Tcl
- Wren
- Wren-str
- Wren-fmt
- Zkl