Append numbers at same position in strings
Append numbers at same position in strings is a draft programming task. It is not yet considered ready to be promoted as a complete task, for reasons that should be found in its talk page.
- Task
Let given three list:
list1 = [1,2,3,4,5,6,7,8,9]
list2 = [10,11,12,13,14,15,16,17,18]
list3 = [19,20,21,22,23,24,25,26,27]
Append numbers at same position in strings.
The result should be:
list = [11019,21120,31221,41322,51423,61524,71625,81726,91827]
11l
V list1 = [1, 2, 3, 4, 5, 6, 7, 8, 9]
V list2 = [10, 11, 12, 13, 14, 15, 16, 17, 18]
V list3 = [19, 20, 21, 22, 23, 24, 25, 26, 27]
print(zip(list1, list2, list3).map((n1, n2, n3) -> String(n1)‘’n2‘’n3))
- Output:
[11019, 21120, 31221, 41322, 51423, 61524, 71625, 81726, 91827]
Ada
with Ada.Text_Io;
with Ada.Strings.Fixed;
procedure Append_Numbers is
use Ada.Text_Io, Ada.Strings;
type List_Type is array (Positive range <>) of Natural;
procedure Put (List : List_Type) is
begin
Put ("[");
for E of List loop
Put (Natural'Image (E));
end loop;
Put ("]");
end Put;
List_1 : constant List_Type := ( 1, 2, 3, 4, 5, 6, 7, 8, 9);
List_2 : constant List_Type := (10, 11, 12, 13, 14, 15, 16, 17, 18);
List_3 : constant List_Type := (19, 20, 21, 22, 23, 24, 25, 26, 27);
List : List_Type (List_1'Range);
begin
for A in List'Range loop
List (A) := Natural'Value
(Fixed.Trim (Natural'Image (List_1 (A)), Left) &
Fixed.Trim (Natural'Image (List_2 (A)), Left) &
Fixed.Trim (Natural'Image (List_3 (A)), Left));
end loop;
Put (List); New_Line;
end Append_Numbers;
- Output:
[ 11019 21120 31221 41322 51423 61524 71625 81726 91827]
ALGOL 68
BEGIN # form a list of strings by concatenating numbers from 3 lists #
[]INT list1 = ( 1, 2, 3, 4, 5, 6, 7, 8, 9 )
, list2 = ( 10, 11, 12, 13, 14, 15, 16, 17, 18 )
, list3 = ( 19, 20, 21, 22, 23, 24, 25, 26, 27 )
;
[ LWB list1 : UPB list1 ]STRING result;
FOR i FROM LWB list1 TO UPB list1 DO
result[ i ] := whole( list1[ i ], 0 ) + whole( list2[ i ], 0 ) + whole( list3[ i ], 0 )
OD;
STRING prefix := "[ ";
FOR i FROM LWB result TO UPB result DO
print( ( prefix, result[ i ] ) );
prefix := ", "
OD;
print( ( " ]", newline ) )
END
- Output:
[ 11019, 21120, 31221, 41322, 51423, 61524, 71625, 81726, 91827 ]
APL
list1←1 2 3 4 5 6 7 8 9
list2←10 11 12 13 14 15 16 17 18
list3←19 20 21 22 23 24 25 26 27
append←⍎¨∘(,/)∘(⍕¨)∘(⍉↑)
append list1 list2 list3
- Output:
11019 21120 31221 41322 51423 61524 71625 81726 91827
AutoHotkey
list1 := [1,2,3,4,5,6,7,8,9]
list2 := [10,11,12,13,14,15,16,17,18]
list3 := [19,20,21,22,23,24,25,26,27]
list4 := []
for i, v in list1
list4.Push(v . list2[i] . list3[i])
for i, v in list4
result .= v ", "
MsgBox % "[" trim(result, ", ") "]"
- Output:
[11019, 21120, 31221, 41322, 51423, 61524, 71625, 81726, 91827]
AWK
# syntax: GAWK -f APPEND_NUMBERS_AT_SAME_POSITION_IN_STRINGS.AWK
BEGIN {
n1 = split("1,2,3,4,5,6,7,8,9",list1,",")
n2 = split("10,11,12,13,14,15,16,17,18",list2,",")
n3 = split("19,20,21,22,23,24,25,26,27",list3,",")
if (n1 != n2 || n1 != n3) {
print("error: arrays must be same length")
exit(1)
}
for (i=1; i<=n1; i++) {
list[i] = list1[i] list2[i] list3[i]
printf("%s ",list[i])
}
printf("\n")
exit(0)
}
- Output:
11019 21120 31221 41322 51423 61524 71625 81726 91827
C
#include<stdio.h>
#include<stdlib.h>
int main(void) {
int list[3][9], i;
for(i=0;i<27;i++) list[i/9][i%9]=1+i;
for(i=0;i<9;i++) printf( "%d%d%d ", list[0][i], list[1][i], list[2][i] );
return 0;
}
- Output:
11019 21120 31221 41322 51423 61524 71625 81726 91827
CLU
append = proc (lists: sequence[sequence[int]]) returns (sequence[int])
n_lists: int := sequence[sequence[int]]$size(lists)
n_items: int := sequence[int]$size(lists[1])
out_list: array[int] := array[int]$predict(1,n_items)
for i: int in int$from_to(1, n_items) do
item: string := ""
for j: int in int$from_to(1, n_lists) do
item := item || int$unparse(lists[j][i])
end
array[int]$addh(out_list, int$parse(item))
end
return(sequence[int]$a2s(out_list))
end append
start_up = proc ()
list1 = sequence[int]$[1,2,3,4,5,6,7,8,9]
list2 = sequence[int]$[10,11,12,13,14,15,16,17,18]
list3 = sequence[int]$[19,20,21,22,23,24,25,26,27]
lists = sequence[sequence[int]]$[list1,list2,list3]
po: stream := stream$primary_output()
for n: int in sequence[int]$elements(append(lists)) do
stream$puts(po, int$unparse(n) || " ")
end
end start_up
- Output:
11019 21120 31221 41322 51423 61524 71625 81726 91827
F#
// Append numbers at same position in strings. Nigel Galloway: December 29th., 2021
let rec fG n g l=seq{match n,g,l with (n::x,g::y,l::z)->yield int((string n)+(string g)+(string l)); yield! fG x y z |_->()}
fG [1;2;3;4;5;6;7;8;9] [10;11;12;13;14;15;16;17;18] [19;20;21;22;23;24;25;26;27] |> Seq.iter(printf "%d "); printfn ""
- Output:
11019 21120 31221 41322 51423 61524 71625 81726 91827
Factor
USING: kernel math.parser math.ranges present prettyprint
sequences ;
27 [1,b] 9 cut 9 cut [ [ present ] tri@ 3append dec> ] 3map .
- Output:
{ 11019 21120 31221 41322 51423 61524 71625 81726 91827 }
FreeBASIC
dim as integer list1(1 to 9) = {1,2,3,4,5,6,7,8,9}
dim as integer list2(1 to 9) = {10,11,12,13,14,15,16,17,18}
dim as integer list3(1 to 9) = {19,20,21,22,23,24,25,26,27}
dim as integer catlist(1 to 9)
dim as string temp
for i as uinteger = 1 to 9
temp = str(list1(i)) + str(list2(i)) + str(list3(i))
catlist(i) = val(temp)
print catlist(i);" ";
next i
- Output:
11019 21120 31221 41322 51423 61524 71625 81726 91827
Go
package main
import "fmt"
func main() {
list1 := [9]int{1, 2, 3, 4, 5, 6, 7, 8, 9}
list2 := [9]int{10, 11, 12, 13, 14, 15, 16, 17, 18}
list3 := [9]int{19, 20, 21, 22, 23, 24, 25, 26, 27}
var list [9]int
for i := 0; i < 9; i++ {
list[i] = list1[i]*1e4 + list2[i]*1e2 + list3[i]
}
fmt.Println(list)
}
- Output:
[11019 21120 31221 41322 51423 61524 71625 81726 91827]
jq
Works with gojq, the Go implementation of jq
def list1 : [ range(1;10) ];
def list2 : [ range(10; 19)];
def list3 : [ range(19; 28) ];
[list1, list2, list3]
| transpose
| map( map(tostring) | add | tonumber)
- Output:
[11019,21120,31221,41322,51423,61524,71625,81726,91827]
Julia
list1 = [1,2,3,4,5,6,7,8,9]
list2 = [10,11,12,13,14,15,16,17,18]
list3 = [19,20,21,22,23,24,25,26,27]
println([prod(string(n) for n in z) for z in zip(list1, list2, list3)]) # ["11019", "21120", "31221", "41322", "51423", "61524", "71625", "81726", "91827"]
Lambdatalk
Using a function returning an array
{def append_numbers
{def append_numbers.rec
{lambda {:a :b :c :d}
{if {A.empty? :a}
then :d
else {append_numbers.rec {A.rest :a} {A.rest :b} {A.rest :c}
{A.addlast! {A.first :a}{A.first :b}{A.first :c} :d}}
}}}
{lambda {:a :b :c}
{append_numbers.rec :a :b :c {A.new}}}}
-> append_numbers
{append_numbers
{A.new {S.serie 1 9}}
{A.new {S.serie 10 18}}
{A.new {S.serie 19 27}}}
-> [11019,21120,31221,41322,51423,61524,71625,81726,91827]
or a map returning a sequence
{S.map {{lambda {:a :b :c :i}
{A.get :i :a}{A.get :i :b}{A.get :i :c}}
{A.new {S.serie 1 9}}
{A.new {S.serie 10 18}}
{A.new {S.serie 19 27}}
} {S.serie 0 8}}
-> 11019 21120 31221 41322 51423 61524 71625 81726 91827
Mathematica / Wolfram Language
list1 = {1, 2, 3, 4, 5, 6, 7, 8, 9};
list2 = {10, 11, 12, 13, 14, 15, 16, 17, 18};
list3 = {19, 20, 21, 22, 23, 24, 25, 26, 27};
MapThread[
FromDigits@Flatten[IntegerDigits /@ {##}] &, {list1, list2, list3}]
- Output:
{11019,21120,31221,41322,51423,61524,71625,81726,91827}
Pascal
The following program requires (at least) an ISO 7185-compliant processor supporting features at level 1 (specifically “conformant array parameters” are being used).
program appendNumbersAtSamePositionInStrings(output);
type
wholeNumber = 0..maxInt;
var
i: integer;
{ Indices were chosen to ease up initialization in main block. }
list0: array[1..9] of wholeNumber;
list1: array[10..18] of wholeNumber;
list2: array[19..27] of wholeNumber;
{ Returns the number of digits necessary to express as decimal. }
function digitCount(i: wholeNumber): wholeNumber;
begin
{ Instead of an `if` branch you can simply write: }
i := i + ord(i = 0);
{ Remember: Argument to `ln` must be positive. }
digitCount := succ(trunc(ln(i) / ln(10)))
end;
{ Appends two list members in place. }
procedure append(
{ DI: Destination Index; SI: Source Index. }
var destination: array[diMin..diMax: integer] of wholeNumber;
source: array[siMin..siMax: integer] of wholeNumber
);
var
i, n: integer;
begin
{ Determine maximum index range. }
i := diMax - diMin;
if (siMax - siMin) < i then
begin
i := siMax - siMin
end;
{ NB: In Pascal `for`-loop-limits are evaluation exactly once only. }
for i := 0 to i do
begin
{ In Extended Pascal (ISO 10206) you could actually simply write: }
{ … := destination[diMin + i] * 10 pow digitCount(source[siMin + i]) }
for n := 1 to digitCount(source[siMin + i]) do
begin
destination[diMin + i] := destination[diMin + i] * 10
end;
destination[diMin + i] := destination[diMin + i] + source[siMin + i]
end
end;
{ Calls `append` twice. }
procedure appendTwo(
var destination: array[diMin..diMax: integer] of wholeNumber;
source0: array[si0Min..si0Max: integer] of wholeNumber;
source1: array[si1Min..si1Max: integer] of wholeNumber
);
begin
append(destination, source0);
append(destination, source1)
end;
{ === MAIN ============================================================= }
begin
for i := 1 to 9 do
begin
list0[i] := i
end;
for i := 10 to 18 do
begin
list1[i] := i
end;
for i := 19 to 27 do
begin
list2[i] := i
end;
appendTwo(list0, list1, list2);
for i := 1 to 9 do
begin
writeLn(list0[i])
end
end.
- Output:
11019 21120 31221 41322 51423 61524 71625 81726 91827
Perl
use strict;
use warnings;
my @a = < 1 2 3 4 5 6 7 8 9>;
my @b = <10 11 12 13 14 15 16 17 18>;
my @c = <19 20 21 22 23 24 25 26 27>;
my @d = <1 2 2 2 2 2 2 2 2 >;
my @e = < 9 0 1 2 3 4 5 6 7>;
my @f = (\@a, \@b, \@d, \@e);
# for just the three given lists
print $a[$_] . $b[$_] . $c[$_] . ' ' for 0..$#a; print "\n";
# for arbitrary number of lists
for my $i (0 .. $#{$f[0]}) {
map {print $f[$_][$i] } 0 .. $#f and print ' '
}
print "\n";
- Output:
11019 21120 31221 41322 51423 61524 71625 81726 91827 11019 21120 31221 41322 51423 61524 71625 81726 91827
Phix
printf(1,"%V%V\n",repeat(apply(apply(true,vslice,{{sq_mul({tagset(9),tagset(18,10),tagset(27,19)},{1e4,1e2,1})},tagset(9)}),sum),2))
- Output:
{11019,21120,31221,41322,51423,61524,71625,81726,91827}{11019,21120,31221,41322,51423,61524,71625,81726,91827}
Python
list1 = [1, 2, 3, 4, 5, 6, 7, 8, 9]
list2 = [10, 11, 12, 13, 14, 15, 16, 17, 18]
list3 = [19, 20, 21, 22, 23, 24, 25, 26, 27]
print([
''.join(str(n) for n in z) for z
in zip(list1, list2, list3)
])
which is also expressible as a map:
print(list(map(
lambda x, y, z: f'{x}{y}{z}',
[1, 2, 3, 4, 5, 6, 7, 8, 9],
[10, 11, 12, 13, 14, 15, 16, 17, 18],
[19, 20, 21, 22, 23, 24, 25, 26, 27]
)))
- Output:
['11019', '21120', '31221', '41322', '51423', '61524', '71625', '81726', '91827']
Raku
Not really seeing why we need to show the result twice but that's what the requirement is... ¯\_(ツ)_/¯ (I find myself making that gesture often in response to Calmosofts tasks.)
say [[Z~] [1,2,3,4,5,6,7,8,9], [10,11,12,13,14,15,16,17,18], [19,20,21,22,23,24,25,26,27]] xx 2;
- Output:
([11019 21120 31221 41322 51423 61524 71625 81726 91827] [11019 21120 31221 41322 51423 61524 71625 81726 91827])
Ring
load "stdlib.ring"
list1 = [1,2,3,4,5,6,7,8,9]
list2 = [10,11,12,13,14,15,16,17,18]
list3 = [19,20,21,22,23,24,25,26,27]
list = []
for n = 1 to len(list1)
str1 = string(list1[n])
str2 = string(list2[n])
str3 = string(list3[n])
str = str1 + str2 + str3
add(list,str)
next
showArray(list)
func showArray(array)
txt = ""
see "["
for n = 1 to len(array)
txt = txt + array[n] + ","
next
txt = left(txt,len(txt)-1)
txt = txt + "]"
see txt
- Output:
list = [11019,21120,31221,41322,51423,61524,71625,81726,91827][11019,21120,31221,41322,51423,61524,71625,81726,91827]
Ruby
list1 = (1..9) .to_a
list2 = (10..18).to_a
list3 = (19..27).to_a
p list = [list1, list2, list3].transpose.map{|trio| trio.join.to_i }
- Output:
[11019, 21120, 31221, 41322, 51423, 61524, 71625, 81726, 91827]
Sidef
var lists = [
[1,2,3,4,5,6,7,8,9],
[10,11,12,13,14,15,16,17,18],
[19,20,21,22,23,24,25,26,27],
]
say lists.zip.map_2d {|*a| a.join.to_i }
- Output:
[11019, 21120, 31221, 41322, 51423, 61524, 71625, 81726, 91827]
Vlang
fn main() {
list1 := [1, 2, 3, 4, 5, 6, 7, 8, 9]!
list2 := [10, 11, 12, 13, 14, 15, 16, 17, 18]!
list3 := [19, 20, 21, 22, 23, 24, 25, 26, 27]!
mut list := [9]int{}
for i in 0..9 {
list[i] = list1[i]*int(1e4) + list2[i]*int(1e2) + list3[i]
}
println(list)
}
- Output:
[11019, 21120, 31221, 41322, 51423, 61524, 71625, 81726, 91827]
Wren
var list1 = (1..9).toList
var list2 = (10..18).toList
var list3 = (19..27).toList
var list = (0..8).map { |i| 1e4*list1[i] + 100*list2[i] + list3[i] }.toList
System.print(list)
- Output:
[11019, 21120, 31221, 41322, 51423, 61524, 71625, 81726, 91827]
XPL0
intI;forI:=1to9do[IntOut(0,I*10000+(I+9)*100+I+18);ChOut(0,^ )]
- Output:
11019 21120 31221 41322 51423 61524 71625 81726 91827