Sieve of Eratosthenes
The Sieve of Eratosthenes is a simple algorithm that finds the prime numbers up to a given integer. Implement this algorithm, with the only allowed optimization that the outer loop can stop at the square root of the limit, and the inner loop may start at the square of the prime just found. That means especially that you shouldn't optimize by using pre-computed wheels, i.e. don't assume you need only to cross out odd numbers (wheel based on 2), numbers equal to 1 or 5 modulo 6 (wheel based on 2 and 3), or similar wheels based on low primes.
![Task](http://static.miraheze.org/rosettacodewiki/thumb/b/ba/Rcode-button-task-crushed.png/64px-Rcode-button-task-crushed.png)
You are encouraged to solve this task according to the task description, using any language you may know.
If there's an easy way to add such a wheel based optimization, implement this as an alternative version.
- Note
- It is important that the sieve algorithm be the actual algorithm used to find prime numbers for the task.
- Cf
68000 Assembly
Algorithm somewhat optimized: array omits 1, 2, all higher odd numbers. Optimized for storage: uses bit array for prime/composite flags.
Some of the macro code is derived from the examples included with EASy68K. See 68000 "100 Doors" listing for additional information. <lang 68000>*-----------------------------------------------------------
- Title : BitSieve
- Written by : G. A. Tippery
- Date : 2014-Feb-24, 2013-Dec-22
- Description: Prime number sieve
- -----------------------------------------------------------
ORG $1000
- ---- Generic macros ---- **
PUSH MACRO MOVE.L \1,-(SP) ENDM
POP MACRO MOVE.L (SP)+,\1 ENDM
DROP MACRO ADDQ #4,SP ENDM
PUTS MACRO ** Print a null-terminated string w/o CRLF ** ** Usage: PUTS stringaddress ** Returns with D0, A1 modified MOVEQ #14,D0 ; task number 14 (display null string) LEA \1,A1 ; address of string TRAP #15 ; display it ENDM
GETN MACRO MOVEQ #4,D0 ; Read a number from the keyboard into D1.L. TRAP #15 ENDM
- ---- Application-specific macros ---- **
val MACRO ; Used by bit sieve. Converts bit address to the number it represents. ADD.L \1,\1 ; double it because odd numbers are omitted ADDQ #3,\1 ; add offset because initial primes (1, 2) are omitted ENDM
- ** ================================================================================ **
- ** Integer square root routine, bisection method **
- ** IN: D0, should be 0<D0<$1000 (65536) -- higher values MAY work, no guarantee
- ** OUT: D1
SquareRoot:
MOVEM.L D2-D4,-(SP) ; save registers needed for local variables
- DO == n
- D1 == a
- D2 == b
- D3 == guess
- D4 == temp
- a = 1;
- b = n;
MOVEQ #1,D1 MOVE.L D0,D2
- do {
REPEAT
- guess = (a+b)/2;
MOVE.L D1,D3 ADD.L D2,D3 LSR.L #1,D3
- if (guess*guess > n) { // inverse function of sqrt is square
MOVE.L D3,D4 MULU D4,D4 ; guess^2 CMP.L D0,D4 BLS .else
- b = guess;
MOVE.L D3,D2 BRA .endif
- } else {
.else:
- a = guess;
MOVE.L D3,D1
- } //if
.endif:
- } while ((b-a) > 1); ; Same as until (b-a)<=1 or until (a-b)>=1
MOVE.L D2,D4 SUB.L D1,D4 ; b-a UNTIL.L D4 <LE> #1 DO.S
- return (a) ; Result is in D1
- } //LongSqrt()
MOVEM.L (SP)+,D2-D4 ; restore saved registers RTS
- ** ================================================================================ **
- ======================================================================= **
-
- Prime-number Sieve of Eratosthenes routine using a big bit field for flags **
- Enter with D0 = size of sieve (bit array)
- Prints found primes 10 per line
- Returns # prime found in D6
- Register usage:
- D0 == n
- D1 == prime
- D2 == sqroot
- D3 == PIndex
- D4 == CIndex
- D5 == MaxIndex
- D6 == PCount
- A0 == PMtx[0]
- On return, all registers above except D0 are modified. Could add MOVEMs to save and restore D2-D6/A0.
- ------------------------ **
GetBit: ** sub-part of Sieve subroutine ** ** Entry: bit # is on TOS ** Exit: A6 holds the byte number, D7 holds the bit number within the byte ** Note: Input param is still on TOS after return. Could have passed via a register, but
** wanted to practice with stack. :)
MOVE.L (4,SP),D7 ; get value from (pre-call) TOS ASR.L #3,D7 ; /8 MOVEA D7,A6 ; byte # MOVE.L (4,SP),D7 ; get value from (pre-call) TOS AND.L #$7,D7 ; bit # RTS
- ------------------------ **
Sieve: MOVE D0,D5 SUBQ #1,D5 JSR SquareRoot ; sqrt D0 => D1 MOVE.L D1,D2 LEA PArray,A0 CLR.L D3
PrimeLoop: MOVE.L D3,D1 val D1 MOVE.L D3,D4 ADD.L D1,D4
CxLoop: ; Goes through array marking multiples of d1 as composite numbers CMP.L D5,D4 BHI ExitCx PUSH D4 ; set D7 as bit # and A6 as byte pointer for D4'th bit of array JSR GetBit DROP BSET D7,0(A0,A6.L) ; set bit to mark as composite number ADD.L D1,D4 ; next number to mark BRA CxLoop ExitCx: CLR.L D1 ; Clear new-prime-found flag ADDQ #1,D3 ; Start just past last prime found PxLoop: ; Searches for next unmarked (not composite) number CMP.L D2,D3 ; no point searching past where first unmarked multiple would be past end of array BHI ExitPx ; if past end of array TST.L D1 BNE ExitPx ; if flag set, new prime found PUSH D3 ; check D3'th bit flag JSR GetBit ; sets D7 as bit # and A6 as byte pointer DROP ; drop TOS BTST D7,0(A0,A6.L) ; read bit flag BNE IsSet ; If already tagged as composite MOVEQ #-1,D1 ; Set flag that we've found a new prime IsSet: ADDQ #1,D3 ; next PIndex BRA PxLoop ExitPx: SUBQ #1,D3 ; back up PIndex TST.L D1 ; Did we find a new prime #? BNE PrimeLoop ; If another prime # found, go process it
; fall through to print routine
- ------------------------ **
- Print primes found
- D4 == Column count
- Print header and assumed primes (#1, #2)
PUTS Header ; Print string @ Header, no CR/LF
MOVEQ #2,D6 ; Start counter at 2 because #1 and #2 are assumed primes MOVEQ #2,D4
MOVEQ #0,D3 PrintLoop: CMP.L D5,D3 BHS ExitPL PUSH D3 JSR GetBit ; sets D7 as bit # and A6 as byte pointer DROP ; drop TOS BTST D7,0(A0,A6.L) BNE NotPrime
- printf(" %6d", val(PIndex)
MOVE.L D3,D1 val D1 AND.L #$0000FFFF,D1 MOVEQ #6,D2 MOVEQ #20,D0 ; display signed RJ TRAP #15 ADDQ #1,D4 ADDQ #1,D6
- *** Display formatting ***
- if((PCount % 10) == 0) printf("\n");
CMP #10,D4 BLO NoLF PUTS CRLF MOVEQ #0,D4 NoLF: NotPrime: ADDQ #1,D3 BRA PrintLoop ExitPL: RTS
- ======================================================================= **
N EQU 5000 ; *** Size of boolean (bit) array *** SizeInBytes EQU (N+7)/8
START: ; first instruction of program MOVE.L #N,D0 ; # to test JSR Sieve
- printf("\n %d prime numbers found.\n", D6); ***
PUTS Summary1,A1 MOVE #3,D0 ; Display signed number in D1.L in decimal in smallest field. MOVE.W D6,D1 TRAP #15 PUTS Summary2,A1
SIMHALT ; halt simulator
- ======================================================================= **
- Variables and constants here
ORG $2000 CR EQU 13 LF EQU 10 CRLF DC.B CR,LF,$00
PArray: DCB.B SizeInBytes,0
Header: DC.B CR,LF,LF,' Primes',CR,LF,' ======',CR,LF DC.B ' 1 2',$00
Summary1: DC.B CR,LF,' ',$00 Summary2: DC.B ' prime numbers found.',CR,LF,$00
END START ; last line of source</lang>
ACL2
<lang Lisp>(defun nats-to-from (n i)
(declare (xargs :measure (nfix (- n i)))) (if (zp (- n i)) nil (cons i (nats-to-from n (+ i 1)))))
(defun remove-multiples-up-to-r (factor limit xs i)
(declare (xargs :measure (nfix (- limit i)))) (if (or (> i limit) (zp (- limit i)) (zp factor)) xs (remove-multiples-up-to-r factor limit (remove i xs) (+ i factor))))
(defun remove-multiples-up-to (factor limit xs)
(remove-multiples-up-to-r factor limit xs (* factor 2)))
(defun sieve-r (factor limit)
(declare (xargs :measure (nfix (- limit factor)))) (if (zp (- limit factor)) (nats-to-from limit 2) (remove-multiples-up-to factor (+ limit 1) (sieve-r (1+ factor) limit))))
(defun sieve (limit)
(sieve-r 2 limit))</lang>
Ada
<lang Ada>with Ada.Text_IO, Ada.Command_Line;
procedure Eratos is
Last: Positive := Positive'Value(Ada.Command_Line.Argument(1)); Prime: array(1 .. Last) of Boolean := (1 => False, others => True); Base: Positive := 2; Cnt: Positive;
begin
loop exit when Base * Base > Last; if Prime(Base) then Cnt := Base + Base; loop exit when Cnt > Last; Prime(Cnt) := False; Cnt := Cnt + Base; end loop; end if; Base := Base + 1; end loop; Ada.Text_IO.Put("Primes less or equal" & Positive'Image(Last) &" are:"); for Number in Prime'Range loop if Prime(Number) then Ada.Text_IO.Put(Positive'Image(Number)); end if; end loop;
end Eratos;</lang>
Output:
> ./eratos 31 Primes less or equal 31 are : 2 3 5 7 11 13 17 19 23 29 31
ALGOL 68
<lang algol68>BOOL prime = TRUE, non prime = FALSE; PROC eratosthenes = (INT n)[]BOOL: (
[n]BOOL sieve; FOR i TO UPB sieve DO sieve[i] := prime OD; INT m = ENTIER sqrt(n); sieve[1] := non prime; FOR i FROM 2 TO m DO IF sieve[i] = prime THEN FOR j FROM i*i BY i TO n DO sieve[j] := non prime OD FI OD; sieve
);
print((eratosthenes(80),new line))</lang>
Output:
FTTFTFTFFFTFTFFFTFTFFFTFFFFFTFTFFFFFTFFFTFTFFFTFFFFFTFFFFFTFTFFFFFTFFFTFTFFFFFTF
AutoHotkey
Search autohotkey.com: of Eratosthenes
Source: AutoHotkey forum by Laszlo
<lang autohotkey>
MsgBox % "12345678901234567890`n" Sieve(20)
Sieve(n) { ; Sieve of Eratosthenes => string of 0|1 chars, 1 at position k: k is prime
Static zero := 48, one := 49 ; Asc("0"), Asc("1") VarSetCapacity(S,n,one) NumPut(zero,S,0,"char") i := 2 Loop % sqrt(n)-1 { If (NumGet(S,i-1,"char") = one) Loop % n//i If (A_Index > 1) NumPut(zero,S,A_Index*i-1,"char") i += 1+(i>2) } Return S
} </lang>
AutoIt
<lang autoit>
- include <Array.au3>
$M = InputBox("Integer", "Enter biggest Integer") Global $a[$M], $r[$M], $c = 1 For $i = 2 To $M -1 If Not $a[$i] Then $r[$c] = $i $c += 1 For $k = $i To $M -1 Step $i $a[$k] = True Next EndIf Next $r[0] = $c - 1 ReDim $r[$c] _ArrayDisplay($r) </lang>
AWK
An initial array holds all numbers 2..max (which is entered on stdin); then all products of integers are deleted from it; the remaining are displayed in the unsorted appearance of a hash table.
$ awk '{for(i=2;i<=$1;i++) a[i]=1; > for(i=2;i<=sqrt($1);i++) for(j=2;j<=$1;j++) delete a[i*j]; > for(i in a) printf i" "}' 100 71 53 17 5 73 37 19 83 47 29 7 67 59 11 97 79 89 31 13 41 23 2 61 43 3
The following variant does not unset non-primes, but set them to 0, to preserve order in output:
$ awk '{for(i=2;i<=$1;i++) a[i]=1; > for(i=2;i<=sqrt($1);i++) for(j=2;j<=$1;j++) a[i*j]=0; > for(i=2;i<=$1;i++) if(a[i])printf i" "}' 100 2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97
BASIC
<lang freebasic> DIM n AS Integer, k AS Integer, limit AS Integer
INPUT "Enter number to search to: "; limit DIM flags(limit) AS Integer
FOR n = 2 TO SQR(limit)
IF flags(n) = 0 THEN FOR k = n*n TO limit STEP n flags(k) = 1 NEXT k END IF
NEXT n
' Display the primes FOR n = 2 TO limit
IF flags(n) = 0 THEN PRINT n; ", ";
NEXT n </lang>
Applesoft BASIC
<lang basic> 10 INPUT "ENTER NUMBER TO SEARCH TO: ";LIMIT 20 DIM FLAGS(LIMIT) 30 FOR N = 2 TO SQR (LIMIT) 40 IF FLAGS(N) < > 0 GOTO 80 50 FOR K = N * N TO LIMIT STEP N 60 FLAGS(K) = 1 70 NEXT K 80 NEXT N 90 REM DISPLAY THE PRIMES 100 FOR N = 2 TO LIMIT 110 IF FLAGS(N) = 0 THEN PRINT N;", "; 120 NEXT N </lang>
Locomotive Basic
<lang locobasic> 10 DEFINT a-z 20 INPUT "Limit";limit 30 DIM f(limit) 40 FOR n=2 TO SQR(limit) 50 IF f(n)=1 THEN 90 60 FOR k=n*n TO limit STEP n 70 f(k)=1 80 NEXT k 90 NEXT n 100 FOR n=2 TO limit 110 IF f(n)=0 THEN PRINT n;","; 120 NEXT </lang>
ZX Spectrum Basic
<lang basic> 10 INPUT "Enter number to search to: ";l 20 DIM p(l) 30 FOR n=2 TO SQR l 40 IF p(n)<>0 THEN NEXT n 50 FOR k=n*n TO l STEP n 60 LET p(k)=1 70 NEXT k 80 NEXT n 90 REM Display the primes 100 FOR n=2 TO l 110 IF p(n)=0 THEN PRINT n;", "; 120 NEXT n </lang>
BBC BASIC
<lang bbcbasic> limit% = 100000
DIM sieve% limit% prime% = 2 WHILE prime%^2 < limit% FOR I% = prime%*2 TO limit% STEP prime% sieve%?I% = 1 NEXT REPEAT prime% += 1 : UNTIL sieve%?prime%=0 ENDWHILE REM Display the primes: FOR I% = 1 TO limit% IF sieve%?I% = 0 PRINT I%; NEXT</lang>
bash
See solutions at UNIX Shell.
Befunge
2>:3g" "-!v\ g30 < |!`"O":+1_:.:03p>03g+:"O"`| @ ^ p3\" ":< 2 234567890123456789012345678901234567890123456789012345678901234567890123456789
Bracmat
This solution does not use an array. Instead, numbers themselves are used as variables. The numbers that are not prime are set (to the silly value "nonprime"). Finally all numbers up to the limit are tested for being initialised. The uninitialised (unset) ones must be the primes. <lang bracmat>( ( eratosthenes
= n j i . !arg:?n & 1:?i & whl ' ( (1+!i:?i)^2:~>!n:?j & ( !!i | whl ' ( !j:~>!n & nonprime:?!j & !j+!i:?j ) ) ) & 1:?i & whl ' ( 1+!i:~>!n:?i & (!!i|put$(!i " ")) ) )
& eratosthenes$100 )</lang> Output:
2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97
C
Plain sieve, without any optimizations:
<lang c>
- include <stdlib.h>
- include <math.h>
char* eratosthenes (int n, int *c) {
char* sieve; int i, j, m;
if (n < 2) { *c = 0; return NULL; }
*c = n-1; /* primes count */ m = (int) sqrt ((double) n);
/* calloc initializes to zero */ sieve = calloc (n+1, sizeof(char)); sieve[0] = 1; sieve[1] = 1; for (i = 2; i <= m; i++) { if (sieve[i] == 0) { for (j = i*i; j <= n; j += i) { if (sieve[j] == 0) { sieve[j] = 1; --(*c); } } } } return sieve;
} </lang>
Possible optimizations include sieving only odd numbers (or more complex wheels), packing the sieve into bits to improve locality (and allow larger sieves), etc.
C++
<lang cpp> // yield all prime numbers less than limit. template<class UnaryFunction> void primesupto(int limit, UnaryFunction yield) {
std::vector<bool> is_prime(limit, true); const int sqrt_limit = static_cast<int>(std::sqrt(limit)); for (int n = 2; n <= sqrt_limit; ++n) if (is_prime[n]) {
yield(n);
for (unsigned k = n*n, ulim = static_cast<unsigned>(limit); k < ulim; k += n)
//NOTE: "unsigned" is used to avoid an overflow in `k+=n` for `limit` near INT_MAX
is_prime[k] = false;
}
for (int n = sqrt_limit + 1; n < limit; ++n) if (is_prime[n])
yield(n); } </lang>
Full program:
<lang cpp>/**
$ g++ -I/path/to/boost sieve.cpp -o sieve && sieve 10000000 */
- include <inttypes.h> // uintmax_t
- include <limits>
- include <cmath>
- include <iostream>
- include <sstream>
- include <vector>
- include <boost/lambda/lambda.hpp>
int main(int argc, char *argv[])
{
using namespace std; using namespace boost::lambda;
int limit = 10000; if (argc == 2) { stringstream ss(argv[--argc]); ss >> limit;
if (limit < 1 or ss.fail()) { cerr << "USAGE:\n sieve LIMIT\n\nwhere LIMIT in the range [1, "
<< numeric_limits<int>::max() << ")" << endl;
return 2; } }
// print primes less then 100 primesupto(100, cout << _1 << " "); cout << endl;
// find number of primes less then limit and their sum int count = 0; uintmax_t sum = 0; primesupto(limit, (var(sum) += _1, var(count) += 1));
cout << "limit sum pi(n)\n" << limit << " " << sum << " " << count << endl;
} </lang>
C#
<lang csharp>using System; using System.Collections; using System.Collections.Generic; using System.Linq; using System.Text;
namespace sieve {
class Program { static void Main(string[] args) { int maxprime = int.Parse(args[0]); ArrayList primelist = sieve(maxprime);
foreach (int prime in primelist) Console.WriteLine(prime);
Console.WriteLine("Count = " + primelist.Count); Console.ReadLine(); }
static ArrayList sieve(int arg_max_prime) { BitArray al = new BitArray(arg_max_prime, true);
int lastprime = 1; int lastprimeSquare = 1;
while (lastprimeSquare <= arg_max_prime) { lastprime++;
while (!(bool)al[lastprime]) lastprime++;
lastprimeSquare = lastprime * lastprime;
for (int i = lastprimeSquare; i < arg_max_prime; i += lastprime) if (i > 0) al[i] = false; }
ArrayList sieve_2_return = new ArrayList();
for (int i = 2; i < arg_max_prime; i++) if (al[i]) sieve_2_return.Add(i);
return sieve_2_return; } }
}</lang>
Chapel
This solution uses nested iterators to create new wheels at run time: <lang chapel>// yield prime and remove all multiples of it from children sieves iter sieve(prime):int {
yield prime;
var last = prime; label candidates for candidate in sieve(prime+1) do { for composite in last..candidate by prime do {
// candidate is a multiple of this prime if composite == candidate then { // remember size of last composite last = composite; // and try the next candidate continue candidates; } }
// candidate cannot need to be removed by this sieve // yield to parent sieve for checking yield candidate; }
}</lang>
The topmost sieve needs to be started with 2 (the smallest prime): <lang chapel>config const N = 30; for p in sieve(2) {
write(" ", p); if p > N then { writeln(); break; }
}</lang>
Clojure
Calculates primes up to but not including n. <lang lisp>(defn primes-up-to [n]
(let [n (int n)] "Returns a list of all primes from 2 to n" (let [root (int (Math/round (Math/floor (Math/sqrt n))))] (loop [i (int 3) a (int-array n) result (transient [2])] (if (>= i n) (persistent! result) (recur (+ i (int 2)) (if (<= i root) (loop [arr a inc (+ i i) j (* i i)] (if (>= j n) arr (recur (do (aset arr j (int 1)) arr) inc (+ j inc)))) a) (if (zero? (aget a i)) (conj! result i) result)))))))</lang>
This code is not very idiomatic, looks very much like a procedural language. Here is a non-lazy version: <lang lisp>(defn primes [max-prime]
(let [new-sieve (fn [] (let [v (reduce conj (vector-of :boolean) (range (inc max-prime)))] (assoc (assoc v 0 false) 1 false))),
sieve (fn [S] (loop [s S, n 2] (let [n**2 (* n n)] (if (<= n**2 max-prime) (recur (if (s n) (reduce #(assoc %1 %2 false) s (range n**2 (inc max-prime) n)) s) (inc n)) s)))),
bitset-contents (fn [S] (map second (filter first (map vector S (range (count S))))))]
(bitset-contents (sieve (new-sieve)))))</lang>
Or as a lazy sequence (slightly faster): <lang lisp>(defn primes
"Computes all prime numbers up to a given number using sieve of Eratosthenes" [number] (loop [candidates (range 2 number) primes [2]] (let [toremove (range (last primes) number (last primes))] (let [newcandidates (remove (set toremove) candidates)] (if (> (last primes) (math/sqrt number)) (concat primes newcandidates) (recur newcandidates (concat primes [(first newcandidates)])))))))</lang>
CMake
<lang cmake>function(eratosthenes var limit)
# Check for integer overflow. With CMake using 32-bit signed integer, # this check fails when limit > 46340. if(NOT limit EQUAL 0) # Avoid division by zero. math(EXPR i "(${limit} * ${limit}) / ${limit}") if(NOT limit EQUAL ${i}) message(FATAL_ERROR "limit is too large, would cause integer overflow") endif() endif()
# Use local variables prime_2, prime_3, ..., prime_${limit} as array. # Initialize array to y => yes it is prime. foreach(i RANGE 2 ${limit}) set(prime_${i} y) endforeach(i)
# Gather a list of prime numbers. set(list) foreach(i RANGE 2 ${limit}) if(prime_${i}) # Append this prime to list. list(APPEND list ${i})
# For each multiple of i, set n => no it is not prime. # Optimization: start at i squared. math(EXPR square "${i} * ${i}") if(NOT square GREATER ${limit}) # Avoid fatal error. foreach(m RANGE ${square} ${limit} ${i}) set(prime_${m} n) endforeach(m) endif() endif(prime_${i}) endforeach(i) set(${var} ${list} PARENT_SCOPE)
endfunction(eratosthenes)</lang>
<lang cmake># Print all prime numbers through 100. eratosthenes(primes 100) message(STATUS "${primes}")</lang>
COBOL
<lang cobol>*> Please ignore the asterisks in the first column of the next comments,
- > which are kludges to get syntax highlighting to work.
IDENTIFICATION DIVISION. PROGRAM-ID. Sieve-Of-Eratosthenes.
DATA DIVISION. WORKING-STORAGE SECTION.
01 Max-Number USAGE UNSIGNED-INT. 01 Max-Prime USAGE UNSIGNED-INT.
01 Num-Group. 03 Num-Table PIC X VALUE "P" OCCURS 1 TO 10000000 TIMES DEPENDING ON Max-Number INDEXED BY Num-Index. 88 Is-Prime VALUE "P" FALSE "N". 01 Current-Prime USAGE UNSIGNED-INT.
01 I USAGE UNSIGNED-INT.
PROCEDURE DIVISION. DISPLAY "Enter the limit: " WITH NO ADVANCING ACCEPT Max-Number DIVIDE Max-Number BY 2 GIVING Max-Prime
- *> Set Is-Prime of all non-prime numbers to false.
SET Is-Prime (1) TO FALSE PERFORM UNTIL Max-Prime < Current-Prime
- *> Set current-prime to next prime.
ADD 1 TO Current-Prime PERFORM VARYING Num-Index FROM Current-Prime BY 1 UNTIL Is-Prime (Num-Index) END-PERFORM MOVE Num-Index TO Current-Prime
- *> Set Is-Prime of all multiples of current-prime to
- *> false, starting from current-prime sqaured.
COMPUTE Num-Index = Current-Prime ** 2 PERFORM UNTIL Max-Number < Num-Index SET Is-Prime (Num-Index) TO FALSE SET Num-Index UP BY Current-Prime END-PERFORM END-PERFORM
- *> Display the prime numbers.
PERFORM VARYING Num-Index FROM 1 BY 1 UNTIL Max-Number < Num-Index IF Is-Prime (Num-Index) DISPLAY Num-Index END-IF END-PERFORM
GOBACK .</lang>
Common Lisp
<lang lisp>(defun sieve-of-eratosthenes (maximum)
(let ((sieve (make-array (1+ maximum) :element-type 'bit :initial-element 0))) (loop for candidate from 2 to maximum when (zerop (bit sieve candidate)) collect candidate and do (loop for composite from (expt candidate 2) to maximum by candidate do (setf (bit sieve composite) 1)))))</lang>
Working with odds only (above twice speedup), and only test divide up to the square root of the maximum:
<lang lisp>(defun sieve-odds (maximum) "sieve for odd numbers"
(cons 2 (let ((maxi (ash (1- maximum) -1)) (stop (ash (isqrt maximum) -1))) (let ((sieve (make-array (1+ maxi) :element-type 'bit :initial-element 0))) (loop for i from 1 to maxi when (zerop (sbit sieve i)) collect (1+ (ash i 1)) and when (<= i stop) do (loop for j from (ash (* i (1+ i)) 1) to maxi by (1+ (ash i 1)) do (setf (sbit sieve j) 1)))))))</lang>
While formally a wheel, odds are uniformly spaced and do not require any special processing except for value translation. Wheels proper aren't uniformly spaced and are thus trickier.
D
Simpler Version
Prints all numbers less than the limit. <lang d>import std.stdio, std.algorithm, std.range, std.functional;
uint[] sieve(in uint limit) {
if (limit < 2) return []; auto composite = new bool[limit];
foreach (immutable uint n; 2 .. cast(uint)(limit ^^ 0.5) + 1) if (!composite[n]) for (uint k = n * n; k < limit; k += n) composite[k] = true;
//return iota(2, limit).filter!(not!composite)().array(); return iota(2, limit).filter!(i => !composite[i])().array();
}
void main() {
writeln(sieve(50));
}</lang>
- Output:
[2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47]
Faster Version
This version uses an array of bits (instead of booleans, that are represented with one byte), and skips even numbers. The output is the same. <lang d>import std.stdio, std.math, std.array;
size_t[] sieve(in size_t m) pure nothrow {
if (m < 3) return null; immutable size_t n = m - 1; enum size_t bpc = size_t.sizeof * 8; auto F = new size_t[((n + 2) / 2) / bpc + 1]; F[] = size_t.max;
size_t isSet(in size_t i) nothrow { immutable size_t offset = i / bpc; immutable size_t mask = 1 << (i % bpc); return F[offset] & mask; }
void resetBit(in size_t i) nothrow { immutable size_t offset = i / bpc; immutable size_t mask = 1 << (i % bpc); if ((F[offset] & mask) != 0) F[offset] = F[offset] ^ mask; }
for (size_t i = 3; i <= sqrt(real(n)); i += 2) if (isSet((i - 3) / 2)) for (size_t j = i * i; j <= n; j += 2 * i) resetBit((j - 3) / 2);
Appender!(size_t[]) result; result ~= 2; for (size_t i = 3; i <= n; i += 2) if (isSet((i - 3) / 2)) result ~= i; return result.data;
}
void main() {
50.sieve.writeln;
}</lang>
Extensible Version
The output is the same. <lang d>import std.algorithm, std.bitmanip;
/// Extensible Sieve of Eratosthenes. struct IsPrime {
//__gshared static BitArray multiples = [true, true, false]; __gshared static BitArray multiples;
/*nothrow*/ static this() { multiples.init([true, true, false]); }
static bool opCall(in size_t n) /*nothrow*/ { if (n >= multiples.length) { // Extend the sieve. immutable oldLen = multiples.length; // Not nothrow. immutable newMax = max((oldLen - 1) * 2, n); multiples.length = newMax + 1; foreach (immutable p; 2 .. oldLen) if (!multiples[p]) for (size_t i = p * ((oldLen + p) / p); i < newMax + 1; i += p) multiples[i] = true; foreach (immutable i; oldLen .. newMax + 1) if (!multiples[i]) for (size_t j = i * 2; j < newMax + 1; j += i) multiples[j] = true; }
return !multiples[n]; }
}
version (sieve_of_eratosthenes3_main) {
import std.stdio, std.range;
void main() { 50.iota.filter!IsPrime.writeln; }
}</lang>
Dart
<lang dart>// helper function to pretty print an Iterable String iterableToString(Iterable seq) {
String str = "["; Iterator i = seq.iterator(); while(i.hasNext()) { str += i.next(); if(i.hasNext()) { str += ","; } } return str + "]";
}
main() {
int limit = 1000; Set<int> sieve = new Set<int>();
for(int i = 2; i <= limit; i++) { sieve.add(i); } for(int i = 2; i * i <= limit; i++) { if(sieve.contains(i)) { for(int j = i * i; j <= limit; j += i) { sieve.remove(j); } } } var sortedValues = new List<int>.from(sieve); sortedValues.sort((int arg1, int arg2) { return arg1.compareTo(arg2); }); print(iterableToString(sortedValues)); Expect.equals(168, sieve.length);
}</lang> Output:
[2,3,5,7,11,13,17,19,23,29,31,37,41,43,47,53,59,61,67,71,73,79,83,89,97,101,103,107,109,113,127,131,137,139,149,151,157,163,167,173,179,181,191,193,197,199,211,223,227,229,233,239,241,251,257,263,269,271,277,281,283,293,307,311,313,317,331,337,347,349,353,359,367,373,379,383,389,397,401,409,419,421,431,433,439,443,449,457,461,463,467,479,487,491,499,503,509,521,523,541,547,557,563,569,571,577,587,593,599,601,607,613,617,619,631,641,643,647,653,659,661,673,677,683,691,701,709,719,727,733,739,743,751,757,761,769,773,787,797,809,811,821,823,827,829,839,853,857,859,863,877,881,883,887,907,911,919,929,937,941,947,953,967,971,977,983,991,997]
DWScript
<lang delphi>function Primes(limit : Integer) : array of Integer; var
n, k : Integer; sieve := new Boolean[limit+1];
begin
for n := 2 to Round(Sqrt(limit)) do begin if not sieve[n] then begin for k := n*n to limit step n do sieve[k] := True; end; end; for k:=2 to limit do if not sieve[k] then Result.Add(k);
end;
var r := Primes(50); var i : Integer; for i:=0 to r.High do
PrintLn(r[i]);</lang>
Dylan
With outer to sqrt and inner to p^2 optimizations: <lang dylan>define method primes(n)
let limit = floor(n ^ 0.5) + 1; let sieve = make(limited(<simple-vector>, of: <boolean>), size: n + 1, fill: #t); let last-prime = 2;
while (last-prime < limit) for (x from last-prime ^ 2 to n by last-prime) sieve[x] := #f; end for; block (found-prime) for (n from last-prime + 1 below limit) if (sieve[n] = #f) last-prime := n; found-prime() end; end; last-prime := limit; end block; end while;
for (x from 2 to n) if (sieve[x]) format-out("Prime: %d\n", x); end; end;
end;</lang>
E
E's standard library doesn't have a step-by-N numeric range, so we'll define one, implementing the standard iteration protocol.
def rangeFromBelowBy(start, limit, step) { return def stepper { to iterate(f) { var i := start while (i < limit) { f(null, i) i += step } } } }
The sieve itself:
def eratosthenes(limit :(int > 2), output) { def composite := [].asSet().diverge() for i ? (!composite.contains(i)) in 2..!limit { output(i) composite.addAll(rangeFromBelowBy(i ** 2, limit, i)) } }
Example usage:
? eratosthenes(12, println) # stdout: 2 # 3 # 5 # 7 # 11
eC
Note: this is not a Sieve of Eratosthenes; it is just trial division. <lang cpp> public class FindPrime {
Array<int> primeList { [ 2 ], minAllocSize = 64 }; int index;
index = 3;
bool HasPrimeFactor(int x) { int max = (int)floor(sqrt((double)x)); for(i : primeList) { if(i > max) break; if(x % i == 0) return true; } return false; }
public int GetPrime(int x) { if(x > primeList.count - 1) { for (; primeList.count != x; index += 2) if(!HasPrimeFactor(index)) { if(primeList.count >= primeList.minAllocSize) primeList.minAllocSize *= 2; primeList.Add(index); } } return primeList[x-1]; }
}
class PrimeApp : Application {
FindPrime fp { }; void Main() { int num = argc > 1 ? atoi(argv[1]) : 1; PrintLn(fp.GetPrime(num)); }
} </lang>
Eiffel
<lang eiffel>class
APPLICATION
create
make
feature
make -- Run application. do across primes_through (100) as ic loop print (ic.item.out + " ") end end primes_through (a_limit: INTEGER): LINKED_LIST [INTEGER] -- Prime numbers through `a_limit' require valid_upper_limit: a_limit >= 2 local l_tab: ARRAY [BOOLEAN] do create Result.make create l_tab.make_filled (True, 2, a_limit) across l_tab as ic loop if ic.item then Result.extend (ic.target_index) across ((ic.target_index * ic.target_index) |..| l_tab.upper).new_cursor.with_step (ic.target_index) as id loop l_tab [id.item] := False end end end end
end</lang>
Output:
2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97
Erlang
<lang Erlang> -module( sieve_of_eratosthenes ).
-export( [primes_upto/1] ).
primes_upto( N ) -> Ns = lists:seq( 2, N ), Dict = dict:from_list( [{X, potential_prime} || X <- Ns] ), {Upto_sqrt_ns, _T} = lists:split( erlang:round(math:sqrt(N)), Ns ), {N, Prime_dict} = lists:foldl( fun find_prime/2, {N, Dict}, Upto_sqrt_ns ), lists:sort( dict:fetch_keys(Prime_dict) ).
find_prime( N, {Max, Dict} ) -> find_prime( dict:find(N, Dict), N, {Max, Dict} ).
find_prime( error, _N, Acc ) -> Acc; find_prime( {ok, _Value}, N, {Max, Dict} ) -> {Max, lists:foldl( fun dict:erase/2, Dict, lists:seq(N*N, Max, N) )}. </lang>
- Output:
35> sieve_of_eratosthenes:primes_upto( 20 ). [2,3,5,7,11,13,17,19]
Euphoria
<lang euphoria>constant limit = 1000 sequence flags,primes flags = repeat(1, limit) for i = 2 to sqrt(limit) do
if flags[i] then for k = i*i to limit by i do flags[k] = 0 end for end if
end for
primes = {} for i = 2 to limit do
if flags[i] = 1 then primes &= i end if
end for ? primes</lang>
Output:
{2,3,5,7,11,13,17,19,23,29,31,37,41,43,47,53,59,61,67,71,73,79,83,89, 97,101,103,107,109,113,127,131,137,139,149,151,157,163,167,173,179, 181,191,193,197,199,211,223,227,229,233,239,241,251,257,263,269,271, 277,281,283,293,307,311,313,317,331,337,347,349,353,359,367,373,379, 383,389,397,401,409,419,421,431,433,439,443,449,457,461,463,467,479, 487,491,499,503,509,521,523,541,547,557,563,569,571,577,587,593,599, 601,607,613,617,619,631,641,643,647,653,659,661,673,677,683,691,701, 709,719,727,733,739,743,751,757,761,769,773,787,797,809,811,821,823, 827,829,839,853,857,859,863,877,881,883,887,907,911,919,929,937,941, 947,953,967,971,977,983,991,997}
F#
Functional
#light let not_divisible_by n = List.filter (fun m -> m % n <> 0) let sieve max = let rec sieve_aux = function | [] -> [] | x :: xs as l -> if x * x > max then l else x :: sieve_aux (not_divisible_by x xs) sieve_aux [2 .. max]
Forth
: prime? ( n -- ? ) here + c@ 0= ; : composite! ( n -- ) here + 1 swap c! ; : sieve ( n -- ) here over erase 2 begin 2dup dup * > while dup prime? if 2dup dup * do i composite! dup +loop then 1+ repeat drop ." Primes: " 2 do i prime? if i . then loop ; 100 sieve
Fortran
<lang fortran>program sieve
implicit none integer, parameter :: i_max = 100 integer :: i logical, dimension (i_max) :: is_prime
is_prime = .true. is_prime (1) = .false. do i = 2, int (sqrt (real (i_max))) if (is_prime (i)) is_prime (i * i : i_max : i) = .false. end do do i = 1, i_max if (is_prime (i)) write (*, '(i0, 1x)', advance = 'no') i end do write (*, *)
end program sieve</lang> Output: <lang>2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97</lang> Optimised using a pre-computed wheel based on 2: <lang fortran>program sieve_wheel_2
implicit none integer, parameter :: i_max = 100 integer :: i logical, dimension (i_max) :: is_prime
is_prime = .true. is_prime (1) = .false. is_prime (4 : i_max : 2) = .false. do i = 3, int (sqrt (real (i_max))), 2 if (is_prime (i)) is_prime (i * i : i_max : 2 * i) = .false. end do do i = 1, i_max if (is_prime (i)) write (*, '(i0, 1x)', advance = 'no') i end do write (*, *)
end program sieve_wheel_2</lang> Output: <lang>2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97</lang>
GAP
<lang gap>Eratosthenes := function(n)
local sieve, cur, mul; sieve := [1 .. n]*0; sieve[1] := 1; cur := 1; while cur <= n do if sieve[cur] = 0 then mul := cur*cur; while mul <= n do sieve[mul] := 1; mul := mul + cur; od; fi; cur := cur + 1; od; return Filtered([1 .. n], x -> sieve[x] = 0);
end;
Eratosthenes(100);
- [ 2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97 ]</lang>
GLBasic
<lang GLBasic>// Sieve of Eratosthenes (find primes) // GLBasic implementation
GLOBAL n%, k%, limit%, flags%[]
limit = 100 // search primes up to this number
DIM flags[limit+1] // GLBasic arrays start at 0
FOR n = 2 TO SQR(limit)
IF flags[n] = 0 FOR k = n*n TO limit STEP n flags[k] = 1 NEXT ENDIF
NEXT
// Display the primes FOR n = 2 TO limit
IF flags[n] = 0 THEN STDOUT n + ", "
NEXT
KEYWAIT </lang>
Go
<lang go>package main
import (
"fmt"
)
func main() {
const limit = 201 // means sieve numbers < 201
// sieve c := make([]bool, limit) // c for composite. false means prime candidate c[1] = true // 1 not considered prime p := 2 for { // first allowed optimization: outer loop only goes to sqrt(limit) p2 := p * p if p2 >= limit { break } // second allowed optimization: inner loop starts at sqr(p) for i := p2; i < limit; i += p { c[i] = true // it's a composite
} // scan to get next prime for outer loop for { p++ if !c[p] { break } } }
// sieve complete. now print a representation. for n := 1; n < limit; n++ { if c[n] { fmt.Print(" .") } else { fmt.Printf("%3d", n) } if n%20 == 0 { fmt.Println("") } }
}</lang> Output:
. 2 3 . 5 . 7 . . . 11 . 13 . . . 17 . 19 . . . 23 . . . . . 29 . 31 . . . . . 37 . . . 41 . 43 . . . 47 . . . . . 53 . . . . . 59 . 61 . . . . . 67 . . . 71 . 73 . . . . . 79 . . . 83 . . . . . 89 . . . . . . . 97 . . . 101 .103 . . .107 .109 . . .113 . . . . . . . . . . . . .127 . . .131 . . . . .137 .139 . . . . . . . . .149 .151 . . . . .157 . . . . .163 . . .167 . . . . .173 . . . . .179 . 181 . . . . . . . . .191 .193 . . .197 .199 .
A fairly odd sieve tree method: <lang go>package main import "fmt"
type xint uint64 type xgen func()(xint)
func primes() func()(xint) { pp, psq := make([]xint, 0), xint(25)
var sieve func(xint, xint)xgen sieve = func(p, n xint) xgen { m, next := xint(0), xgen(nil) return func()(r xint) { if next == nil { r = n if r <= psq { n += p return }
next = sieve(pp[0] * 2, psq) // chain in pp = pp[1:] psq = pp[0] * pp[0]
m = next() } switch { case n < m: r, n = n, n + p case n > m: r, m = m, next() default: r, n, m = n, n + p, next() } return } }
f := sieve(6, 9) n, p := f(), xint(0)
return func()(xint) { switch { case p < 2: p = 2 case p < 3: p = 3 default: for p += 2; p == n; { p += 2 if p > n { n = f() } } pp = append(pp, p) } return p } }
func main() {
for i, p := 0, primes(); i < 100000; i++ {
fmt.Println(p())
}
}</lang>
Example with channels:
<lang go>
package main
import ( "fmt" )
func filter(n int, in chan int) chan int { out := make(chan int) go func() { for i := range in { if i%n != 0 { out <- i } } close(out) }()
return out }
func ints(max int) chan int { out := make(chan int) go func() { for i := 2; i <= max; i++ { out <- i } close(out) }()
return out }
func main() { ch := ints(201) for { i := <-ch if i == 0 { break } fmt.Println(i) ch = filter(i, ch) } } </lang>
Groovy
This solution uses a BitSet for compactness and speed, but in Groovy, BitSet has full List semantics. It also uses both the "square root of the boundary" shortcut and the "square of the prime" shortcut. <lang groovy>def sievePrimes = { bound ->
def isPrime = new BitSet(bound) isPrime[0..1] = false isPrime[2..<bound] = true (2..(Math.sqrt(bound))).each { pc -> if (isPrime[pc]) { ((pc**2)..<bound).step(pc) { isPrime[it] = false } } } (0..<bound).findAll { isPrime[it] }
}</lang>
Test: <lang groovy>println sievePrimes(100)</lang>
Output:
[2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97]
GW-BASIC
<lang qbasic>10 INPUT "ENTER NUMBER TO SEARCH TO: ";LIMIT 20 DIM FLAGS(LIMIT) 30 FOR N = 2 TO SQR (LIMIT) 40 IF FLAGS(N) < > 0 GOTO 80 50 FOR K = N * N TO LIMIT STEP N 60 FLAGS(K) = 1 70 NEXT K 80 NEXT N 90 REM DISPLAY THE PRIMES 100 FOR N = 2 TO LIMIT 110 IF FLAGS(N) = 0 THEN PRINT N;", "; 120 NEXT N</lang>
Haskell
Mutable unboxed arrays, odds only
Mutable array of unboxed Bool
s indexed by Int
s, representing odds only:
<lang haskell>import Control.Monad (forM_, when) import Control.Monad.ST import Data.Array.ST import Data.Array.Unboxed
sieveUO :: Int -> UArray Int Bool sieveUO top = runSTUArray $ do
let m = (top-1) `div` 2 r = floor . sqrt $ fromIntegral top + 1 sieve <- newArray (1,m) True -- :: ST s (STUArray s Int Bool) forM_ [1..r `div` 2] $ \i -> do -- prime(i) = 2i+1 isPrime <- readArray sieve i -- ((2i+1)^2-1)`div`2 = 2i(i+1) when isPrime $ do forM_ [2*i*(i+1), 2*i*(i+2)+1..m] $ \j -> do writeArray sieve j False return sieve
primesToUO :: Int -> [Int] primesToUO top | top > 1 = 2 : [2*i + 1 | (i,True) <- assocs $ sieveUO top]
| otherwise = []</lang>
This represents odds only in the array. Empirical orders of growth is in n primes produced, and improving for bigger n s. Memory consumption is low (array seems to be packed) and growing about linearly with n.
Immutable arrays
This is the most straightforward: <lang haskell>import Data.Array.Unboxed
primesToA m = sieve 3 (array (3,m) [(i,odd i) | i<-[3..m]] :: UArray Int Bool)
where sieve p a | p*p > m = 2 : [i | (i,True) <- assocs a] | a!p = sieve (p+2) $ a//[(i,False) | i <- [p*p, p*p+2*p..m]] | otherwise = sieve (p+2) a</lang>
Its performance sharply depends on compiler optimizations. Compiled with -O2 flag in the presence of the explicit type signature, it is very fast in producing first few million primes. (//)
is an array update operator.
Immutable arrays, by segments
Works by segments between consecutive primes' squares. Should be the fastest of non-monadic code: <lang haskell>import Data.Array.Unboxed
primesSA = 2 : prs ()
where prs () = 3 : sieve 3 [] (prs ()) sieve x fs (p:ps) = [i*2 + x | (i,True) <- assocs a] ++ sieve (p*p) fs2 ps where q = (p*p-x)`div`2 fs2 = (p,0) : [(s, rem (y-q) s) | (s,y) <- fs] a :: UArray Int Bool a = accumArray (\ b c -> False) True (1,q-1) [(i,()) | (s,y) <- fs, i <- [y+s, y+s+s..q]]</lang>
Basic list-based sieve
Straightforward implementation of the sieve of Ertosthenes in its original bounded form: <lang haskell>primesTo m = 2 : eratos [3,5..m] where
eratos (p : xs) | p*p>m = p : xs | True = p : eratos (xs `minus` [p*p, p*p+2*p..m])
minus a@(x:xs) b@(y:ys) = case compare x y of
LT -> x : minus xs b EQ -> minus xs ys GT -> minus a ys
minus a b = a </lang>
Its time complexity is similar to that of optimal trial division because of limitations of Haskell linked lists, where (minus a b)
takes time proportional to length(union a b)
and not (length b)
as achieved in imperative setting with direct-access memory. Uses ordered list representation of sets.
Unbounded list based sieve
Basic version's (((a-b)-c)- ... )
workflow can be rearranged into (a-(b+(c+ ... )))
. This is the idea behind Richard Bird's unbounded code presented in M. O'Neill's article.
<lang haskell>primes = _Y $ ((2:) . minus [3..]
. foldr (\x-> (x*x :) . union [x*x+x, x*x+2*x..]) [])
_Y g = g (_Y g) -- non-sharing multistage fixpoint combinator -- = let x = g x in g x -- sharing two-stage fixpoint combinator
union a@(x:xs) b@(y:ys) = case compare x y of
LT -> x : union xs b EQ -> x : union xs ys GT -> y : union a ys</lang>
List-based tree-merging incremental sieve
Linear merging structure can be further replaced with indefinitely deepening to the right tree-like structure (a-(b+((c+d)+( ((e+f)+(g+h)) + ... ))))
.
This finds primes in gaps between composites, and composites as union of the multiples of primes, merging in a tree-like fashion all the streams of primes' multiples, running with empirical orders of growth of about ~ n1.2 (for producing first few million primes), similarly to priority-queue–based version of M. O'Neill's, and with very low space complexity too (not counting the produced sequence of course): <lang haskell>primes :: [Int] primes = 2 : _Y ((3 :) . gaps 5 . _U . map(\p-> [p*p, p*p+2*p..]))
gaps k s@(x:xs) | k < x = k : gaps (k+2) s -- ~= ([k,k+2..] \\ s), when
| otherwise = gaps (k+2) xs -- k<=x && null(s \\ [k,k+2..])
_U ((x:xs):t) = x : (union xs . _U . pairs) t -- ~= nub . sort . concat
where pairs (xs:ys:t) = union xs ys : pairs t</lang>
Here's the test entry on Ideone.com, a comparison with more versions, and a similar code with wheel optimization.
HicEst
<lang hicest>REAL :: N=100, sieve(N)
sieve = $ > 1 ! = 0 1 1 1 1 ... DO i = 1, N^0.5
IF( sieve(i) ) THEN DO j = i^2, N, i sieve(j) = 0 ENDDO ENDIF
ENDDO
DO i = 1, N
IF( sieve(i) ) WRITE() i
ENDDO </lang>
Icon and Unicon
<lang Icon> procedure main()
sieve(100) end
procedure sieve(n) local p,i,j p:=list(n, 1) every i:=2 to sqrt(n) & j:= i+i to n by i & p[i] == 1 do p[j] := 0 every write(i:=2 to n & p[i] == 1 & i) end</lang>
Alternatively using sets <lang Icon> procedure main()
sieve(100) end
procedure sieve(n) primes := set() every insert(primes,1 to n) every member(primes,i := 2 to n) do every delete(primes,i + i to n by i) delete(primes,1) every write(!sort(primes))
end</lang>
J
sieve=: 3 : 0 m=. <.%:y z=. $0 b=. y{.1 while. m>:j=. 1+b i. 0 do. b=. b+.y$(-j){.1 z=. z,j end. z,1+I.-.b )
"Wheels" may be implemented as follows:
sieve1=: 3 : 0 m=. <.%:y z=. y (>:#]) 2 3 5 7 b=. 1,}.y$+./(*/z)$&>(-z){.&.>1 while. m>:j=. 1+b i. 0 do. b=. b+.y$(-j){.1 z=. z,j end. z,1+I.-.b )
The use of 2 3 5 7 as wheels provides a 20% time improvement for n=1000 and 2% for n=1e6 .
Java
<lang java5>import java.util.LinkedList;
public class Sieve{
public static LinkedList<Integer> sieve(int n){ if(n < 2) return new LinkedList<Integer>(); LinkedList<Integer> primes = new LinkedList<Integer>(); LinkedList<Integer> nums = new LinkedList<Integer>();
for(int i = 2;i <= n;i++){ //unoptimized nums.add(i); }
while(nums.size() > 0){ int nextPrime = nums.remove(); for(int i = nextPrime * nextPrime;i <= n;i += nextPrime){ nums.removeFirstOccurrence(i); } primes.add(nextPrime); } return primes; }
}</lang>
To optimize by testing only odd numbers, replace the loop marked "unoptimized" with these lines: <lang java5>nums.add(2); for(int i = 3;i <= n;i += 2){
nums.add(i);
}</lang>
Version using a BitSet: <lang java5>import java.util.LinkedList; import java.util.BitSet;
public class Sieve{
public static LinkedList<Integer> sieve(int n){ LinkedList<Integer> primes = new LinkedList<Integer>(); BitSet nonPrimes = new BitSet(n+1); for (int p = 2; p <= n ; p = nonPrimes.nextClearBit(p+1)) { for (int i = p * p; i <= n; i += p) nonPrimes.set(i); primes.add(p); } return primes; }
}</lang>
JavaScript
<lang javascript>function erasthenes(limit) {
var primes = []; if (limit >= 2) { var nums = new Array(limit-1); for (var i = 2; i <= limit; i++) nums[i-2] = i;
var last_prime; var idx = 0; while ((last_prime = nums[idx]) <= Math.sqrt(limit)) { if (last_prime != null) for (var i = idx + last_prime; i < limit - 1; i += last_prime) nums[i] = null; idx++; } for (var i = 0; i < nums.length; i++) if (nums[i] != null) primes.push(nums[i]); } return primes;
}
var primes = erasthenes(100);
if (typeof print == "undefined")
print = (typeof WScript != "undefined") ? WScript.Echo : alert;
print(primes); </lang> outputs:
2,3,5,7,11,13,17,19,23,29,31,37,41,43,47,53,59,61,67,71,73,79,83,89,97
Liberty BASIC
<lang lb> 'Notice that arrays are globally visible to functions.
'The sieve() function uses the flags() array. 'This is a Sieve benchmark adapted from BYTE 1985 ' May, page 286
size = 7000 dim flags(7001) start = time$("ms") print sieve(size); " primes found." print "End of iteration. Elapsed time in milliseconds: "; time$("ms")-start end
function sieve(size) for i = 0 to size if flags(i) = 0 then prime = i + i + 3 k = i + prime while k <= size flags(k) = 1 k = k + prime wend sieve = sieve + 1 end if next i end function</lang>
Logo
to sieve :limit make "a (array :limit 2) ; initialized to empty lists make "p [] for [i 2 :limit] [ if empty? item :i :a [ queue "p :i for [j [:i * :i] :limit :i] [setitem :j :a :i] ] ] output :p end print sieve 100 ; 2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97
Lua
<lang lua>function erato(n)
local t = {0, 2} for i = 3, n, 2 do t[i], t[i+1] = i, 0 end for i = 3, math.sqrt(n) do for j = i*i, n, 2*i do t[j] = 0 end end return t
end</lang>
Lucid
prime where prime = 2 fby (n whenever isprime(n)); n = 3 fby n+2; isprime(n) = not(divs) asa divs or prime*prime > N where N is current n; divs = N mod prime eq 0; end; end
recursive
sieve( N ) where N = 2 fby N + 1; sieve( i ) = i fby sieve ( i whenever i mod first i ne 0 ) ; end
M4
<lang M4> define(`lim',100)dnl define(`for',
`ifelse($#,0, ``$0, `ifelse(eval($2<=$3),1, `pushdef(`$1',$2)$5`'popdef(`$1')$0(`$1',eval($2+$4),$3,$4,`$5')')')')dnl
for(`j',2,lim,1,
`ifdef(a[j], `', `j for(`k',eval(j*j),lim,j, `define(a[k],1)')')')
</lang>
Output:
2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97
Mathematica
<lang Mathematica> Eratosthenes[n_] := Module[
{numbers = Range[n]},
Do[If[numbersi != 0, Do[numbersi j = 0, {j, 2, n/i}]], {i, 2, Sqrt[n]}]; Select[numbers, # > 1 &]];
Eratosthenes[100] </lang>
MATLAB
<lang MATLAB>function primeList = sieveOfEratosthenes(lastNumber)
list = (2:lastNumber); %Construct list of numbers primeList = []; %Preallocate prime list while( list(1)^2 <lastNumber ) primeList = [primeList list(1)]; %add prime to the prime list list( mod(list,list(1))==0 ) = []; %filter out all multiples of the current prime end primeList = [primeList list]; %The rest of the numbers in the list are primes
end</lang>
Sample Output: <lang MATLAB>sieveOfEratosthenes(30)
ans =
2 3 5 7 11 13 17 19 23 29</lang>
Somewhat optimized
<lang MATLAB> function P = erato(x) % Sieve of Eratosthenes: returns all primes between 2 and x
P = [0 2:x] ; % Create vector with all ints between 2 and x where % position 1 is hard-coded as 0 since 1 is not a prime.
for (n=2:sqrt(x)) % All primes factors lie between 2 and sqrt(x). if P(n) % If the current value is not 0 (i.e. a prime), P((2*n):n:x) = 0 ; % then replace all further multiples of it with 0. end end % At this point P is a vector with only primes and zeroes.
P = P(P ~= 0) ; % Remove all zeroes from P, leaving only the primes.
return </lang>
The optimization lies in fewer steps in the for loop, use of MATLAB's built-in array operations and no modulo calculation.
Limitation: your machine has to be able to allocate enough memory for an array of length x.
Maxima
<lang maxima>sieve(n):=block(
[a:makelist(true,n),i:1,j], a[1]:false, do ( i:i+1, unless a[i] do i:i+1, if i*i>n then return(sublist_indices(a,identity)), for j from i*i step i while j<=n do a[j]:false )
)$ </lang>
MAXScript
fn eratosthenes n = ( multiples = #() print 2 for i in 3 to n do ( if (findItem multiples i) == 0 then ( print i for j in (i * i) to n by i do ( append multiples j ) ) ) ) eratosthenes 100
Modula-3
Regular version
<lang modula3> MODULE Prime EXPORTS Main;
IMPORT IO;
CONST LastNum = 1000;
VAR a: ARRAY [2..LastNum] OF BOOLEAN;
BEGIN
FOR i := FIRST(a) TO LAST(a) DO a[i] := TRUE; END;
FOR i := FIRST(a) TO LAST(a) DO IF a[i] THEN IO.PutInt(i); IO.Put(" "); FOR j := FIRST(a) TO LAST(a) DO IF j MOD i = 0 THEN a[j] := FALSE; END; END; END; END; IO.Put("\n");
END Prime. </lang>
Advanced version
This version uses more "advanced" types. <lang modula3>(* From the CM3 examples folder (comments removed). *)
MODULE Sieve EXPORTS Main;
IMPORT IO;
TYPE
Number = [2..1000]; Set = SET OF Number;
VAR
prime: Set := Set {FIRST(Number) .. LAST(Number)};
BEGIN
FOR i := FIRST(Number) TO LAST(Number) DO IF i IN prime THEN IO.PutInt(i); IO.Put(" ");
FOR j := i TO LAST(Number) BY i DO prime := prime - Set{j}; END; END; END; IO.Put("\n");
END Sieve.</lang>
MUMPS
<lang MUMPS>ERATO1(HI)
;performs the Sieve of Erotosethenes up to the number passed in. ;This version sets an array containing the primes SET HI=HI\1 KILL ERATO1 ;Don't make it new - we want it to remain after we quit the function NEW I,J,P FOR I=2:1:(HI**.5)\1 FOR J=I*I:I:HI SET P(J)=1 FOR I=2:1:HI S:'$DATA(P(I)) ERATO1(I)=I KILL I,J,P QUIT</lang>
Example:
USER>SET MAX=100,C=0 DO ERATO1^ROSETTA(MAX) USER>WRITE !,"PRIMES BETWEEN 1 AND ",MAX,! FOR SET I=$ORDER(ERATO1(I)) Q:+I<1 WRITE I,", " PRIMES BETWEEN 1 AND 100 2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73,79, 83, 89, 97,
NetRexx
Version 1 (slow)
<lang Rexx>/* NetRexx */
options replace format comments java crossref savelog symbols binary
parse arg loWatermark hiWatermark . if loWatermark = | loWatermark = '.' then loWatermark = 1 if hiWatermark = | hiWatermark = '.' then hiWatermark = 200
do
if \loWatermark.datatype('w') | \hiWatermark.datatype('w') then - signal NumberFormatException('arguments must be whole numbers') if loWatermark > hiWatermark then - signal IllegalArgumentException('the start value must be less than the end value')
seive = sieveOfEratosthenes(hiWatermark) primes = getPrimes(seive, loWatermark, hiWatermark).strip
say 'List of prime numbers from' loWatermark 'to' hiWatermark 'via a "Sieve of Eratosthenes" algorithm:' say ' 'primes.changestr(' ', ',') say ' Count of primes:' primes.words
catch ex = Exception
ex.printStackTrace
end
return
method sieveOfEratosthenes(hn = long) public static binary returns Rexx
sv = Rexx(isTrue) sv[1] = isFalse ix = long jx = long
loop ix = 2 while ix * ix <= hn if sv[ix] then loop jx = ix * ix by ix while jx <= hn sv[jx] = isFalse end jx end ix
return sv
method getPrimes(seive = Rexx, lo = long, hi = long) private constant binary returns Rexx
primes = Rexx() loop p_ = lo to hi if \seive[p_] then iterate p_ primes = primes p_ end p_
return primes
method isTrue public constant binary returns boolean
return 1 == 1
method isFalse public constant binary returns boolean
return \isTrue
</lang>
- Output
List of prime numbers from 1 to 200 via a "Sieve of Eratosthenes" algorithm: 2,3,5,7,11,13,17,19,23,29,31,37,41,43,47,53,59,61,67,71,73,79,83,89,97,101,103,107,109,113,127,131,137,139,149,151,157,163,167,173,179,181,191,193,197,199 Count of primes: 46
Version 2 (significantly, i.e. 10 times faster)
<lang NetRexx>/* NetRexx ************************************************************
- Essential improvements:Use boolean instead of Rexx for sv
- and remove methods isTrue and isFalse
- 24.07.2012 Walter Pachl courtesy Kermit Kiser
- /
options replace format comments java crossref savelog symbols binary
parse arg loWatermark hiWatermark . if loWatermark = | loWatermark = '.' then loWatermark = 1 if hiWatermark = | hiWatermark = '.' then hiWatermark = 200000
startdate=Date Date() do
if \loWatermark.datatype('w') | \hiWatermark.datatype('w') then - signal NumberFormatException('arguments must be whole numbers') if loWatermark > hiWatermark then - signal IllegalArgumentException(- 'the start value must be less than the end value') sieve = sieveOfEratosthenes(hiWatermark) primes = getPrimes(sieve, loWatermark, hiWatermark).strip if hiWatermark = 200 Then do say 'List of prime numbers from' loWatermark 'to' hiWatermark say ' 'primes.changestr(' ', ',') end
catch ex = Exception
ex.printStackTrace
end enddate=Date Date() Numeric Digits 20 say (enddate.getTime-startdate.getTime)/1000 'seconds elapsed' say ' Count of primes:' primes.words
return
method sieveOfEratosthenes(hn = int) -
public static binary returns boolean[] true = boolean 1 false = boolean 0 sv = boolean[hn+1] sv[1] = false
ix = int jx = int
loop ix=2 to hn sv[ix]=true end ix
loop ix = 2 while ix * ix <= hn if sv[ix] then loop jx = ix * ix by ix while jx <= hn sv[jx] = false end jx end ix
return sv
method getPrimes(sieve = boolean[], lo = int, hi = int) -
private constant binary Returns Rexx p_ = int primes = Rexx() loop p_ = lo to hi if \sieve[p_] then iterate p_ primes = primes p_ end p_
return primes</lang>
Nial
primes is sublist [ each (2 = sum eachright (0 = mod) [pass,count]), pass ] rest count
Using it
|primes 10 =2 3 5 7
Nimrod
Based on one of Python solutions: <lang nimrod>import math, strutils
var is_prime: seq[Bool] = @[] is_prime.add(False) is_prime.add(False)
iterator iprimes_upto(limit: int): int =
for n in high(is_prime) .. limit+2: is_prime.add(True) for n in 2 .. limit + 1: if is_prime[n]: yield n for i in countup((n *% n), limit+1, n): # start at ``n`` squared try: is_prime[i] = False except EInvalidIndex: break
echo("Primes are:")
for x in iprimes_upto(200):
write(stdout, x, " ")
writeln(stdout,"")</lang>
- Output:
Primes are: 2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97 101 103 107 109 113 127 131 137 139 149 151 157 163 167 173 179 181 191 193 197 199
Niue
<lang Niue>[ dup 2 < ] '<2 ; [ 1 + 'count ; [ <2 [ , ] when ] count times ] 'fill-stack ;
0 'n ; 0 'v ;
[ .clr 0 'n ; 0 'v ; ] 'reset ; [ len 1 - n - at 'v ; ] 'set-base ; [ n 1 + 'n ; ] 'incr-n ; [ mod 0 = ] 'is-factor ; [ dup * ] 'sqr ;
[ set-base
v sqr 2 at > not [ [ dup v = not swap v is-factor and ] remove-if incr-n run ] when ] 'run ;
[ fill-stack run ] 'sieve ;
( tests )
10 sieve .s ( => 2 3 5 7 9 ) reset newline 30 sieve .s ( => 2 3 5 7 11 13 17 19 23 29 ) </lang>
Oberon-2
<lang oberon2>MODULE Primes;
IMPORT Out, Math;
CONST N = 1000;
VAR a: ARRAY N OF BOOLEAN; i, j, m: INTEGER;
BEGIN
(* Set all elements of a to TRUE. *) FOR i := 1 TO N - 1 DO a[i] := TRUE; END;
(* Compute square root of N and convert back to INTEGER. *) m := ENTIER(Math.Sqrt(N));
FOR i := 2 TO m DO IF a[i] THEN FOR j := 2 TO (N - 1) DIV i DO a[i*j] := FALSE; END; END; END;
(* Print all the elements of a that are TRUE. *) FOR i := 2 TO N - 1 DO IF a[i] THEN Out.Int(i, 4); END; END; Out.Ln;
END Primes.</lang>
OCaml
Imperative
<lang ocaml>let sieve n =
let is_prime = Array.create n true in let limit = truncate(sqrt (float n)) in for i = 2 to pred limit do if is_prime.(i) then let j = ref (i*i) in try while true do is_prime.(!j) <- false; j := !j + i; done with _ -> () done; (is_prime)</lang>
<lang ocaml>let primes n =
let _, primes = Array.fold_left (fun (i,acc) -> function | true -> (i+1, i::acc) | false -> (i+1, acc)) (0, []) (sieve n) in List.tl(List.tl(List.rev primes))</lang>
in the top-level:
# primes 100 ;; - : int list = [2; 3; 5; 7; 11; 13; 17; 19; 23; 29; 31; 37; 41; 43; 47; 53; 59; 61; 67; 71; 73; 79; 83; 89; 97]
Functional
<lang ocaml>(* first define some iterators *)
- let fold_iter f init a b =
let rec aux acc i = if i > b then (acc) else aux (f acc i) (succ i) in aux init a ;;
val fold_iter : ('a -> int -> 'a) -> 'a -> int -> int -> 'a = <fun>
- let fold_step f init a b step =
let rec aux acc i = if i > b then (acc) else aux (f acc i) (i + step) in aux init a ;;
val fold_step : ('a -> int -> 'a) -> 'a -> int -> int -> int -> 'a = <fun>
(* remove a given value from a list *)
- let remove li v =
let rec aux acc = function | hd::tl when hd = v -> (List.rev_append acc tl) | hd::tl -> aux (hd::acc) tl | [] -> li in aux [] li ;;
val remove : 'a list -> 'a -> 'a list = <fun>
(* the main function *)
- let primes n =
let li = (* create a list [from 2; ... until n] *) List.rev(fold_iter (fun acc i -> (i::acc)) [] 2 n) in let limit = truncate(sqrt(float n)) in fold_iter (fun li i -> if List.mem i li (* test if (i) is prime *) then (fold_step remove li (i*i) n i) else li) li 2 (pred limit) ;;
val primes : int -> int list = <fun>
- primes 200 ;;
- : int list = [2; 3; 5; 7; 11; 13; 17; 19; 23; 29; 31; 37; 41; 43; 47; 53; 59; 61; 67; 71;
73; 79; 83; 89; 97; 101; 103; 107; 109; 113; 127; 131; 137; 139; 149; 151; 157; 163; 167; 173; 179; 181; 191; 193; 197; 199]</lang>
Another functional version
This uses zero to denote struck-out numbers. It is slightly inefficient as it strikes-out multiples above p rather than p2
<lang ocaml># let rec strike_nth k n l = match l with
| [] -> [] | h :: t -> if k = 0 then 0 :: strike_nth (n-1) n t else h :: strike_nth (k-1) n t;;
val strike_nth : int -> int -> int list -> int list = <fun>
- let primes n =
let limit = truncate(sqrt(float n)) in let rec range a b = if a > b then [] else a :: range (a+1) b in let rec sieve_primes l = match l with | [] -> [] | 0 :: t -> sieve_primes t | h :: t -> if h > limit then List.filter ((<) 0) l else h :: sieve_primes (strike_nth (h-1) h t) in sieve_primes (range 2 n) ;;
val primes : int -> int list = <fun>
- primes 200;;
- : int list = [2; 3; 5; 7; 11; 13; 17; 19; 23; 29; 31; 37; 41; 43; 47; 53; 59; 61; 67; 71;
73; 79; 83; 89; 97; 101; 103; 107; 109; 113; 127; 131; 137; 139; 149; 151; 157; 163; 167; 173; 179; 181; 191; 193; 197; 199]</lang>
Oz
<lang oz>declare
fun {Sieve N} S = {Array.new 2 N true} M = {Float.toInt {Sqrt {Int.toFloat N}}} in for I in 2..M do
if S.I then for J in I*I..N;I do S.J := false end end
end S end
fun {Primes N} S = {Sieve N} in for I in 2..N collect:C do
if S.I then {C I} end
end end
in
{Show {Primes 30}}</lang>
PARI/GP
<lang parigp>Eratosthenes(lim)={
my(v=Vectorsmall(lim\1,unused,1)); forprime(p=2,sqrt(lim), forstep(i=p^2,lim,p, v[i]=0 ) ); for(i=1,lim,if(v[i],print1(i", ")))
};</lang>
An alternate version:
<lang parigp>Sieve(n)= { v=vector(n,unused,1); for(i=2,sqrt(n),
if(v[i], forstep(j=i^2,n,i,v[j]=0)));
for(i=2,n,if(v[i],print1(i))) };</lang>
Pascal
Note: Some Pascal implementations put quite low limits on the size of a set (e.g. Turbo Pascal doesn't allow more than 256 members). To compile on such an implementation, reduce the constant PrimeLimit accordingly. <lang pascal> program primes(output)
const
PrimeLimit = 1000;
var
primes: set of 1 .. PrimeLimit; n, k: integer; needcomma: boolean;
begin
{ calculate the primes } primes := [2 .. PrimeLimit]; for n := 1 to trunc(sqrt(PrimeLimit)) do begin if n in primes then begin k := n*n; while k < PrimeLimit do begin primes := primes - [k]; k := k + n end end end;
{ output the primes } needcomma := false; for n := 1 to PrimeLimit do if n in primes then begin if needcomma then write(', '); write(n); needcomma := true end
end. </lang>
Perl
<lang perl>$max= $ARGV[0]; @primes= (); @tested= (1); $j= 1; while ($j < $max) {
next if $tested[$j++]; push @primes, $j; for ($k= $j; $k <= $max; $k+=$j) { $tested[$k-1]= 1; }
} print "@primes\n";</lang>
A version similar to the above, but much faster: <lang perl>sub simple_sieve {
my($max) = @_; return () if $max < 2; return (2) if $max < 3;
my @c; for(my $t=3; $t*$t<=$max; $t+=2) { if (!$c[$t]) { for(my $s=$t*$t; $s<=$max; $s+=$t*2) { $c[$s]++ } } } my @primes = (2); for(my $t=3; $t<=$max; $t+=2) { $c[$t] || push @primes, $t; } @primes;
}</lang>
Using vectors and optimizing away odds. Not much slower than the above, but using 200x less memory: <lang perl>sub dj_vector {
my($end) = @_; return () if $end < 2; return (2) if $end < 3; $end-- if ($end & 1) == 0; # Ensure end is odd
my ($sieve, $n, $limit, $s_end) = ( , 3, int(sqrt($end)), $end >> 1 ); while ( $n <= $limit ) { for (my $s = ($n*$n) >> 1; $s <= $s_end; $s += $n) { vec($sieve, $s, 1) = 1; } do { $n += 2 } while vec($sieve, $n >> 1, 1) != 0; } my @primes = (2); do { push @primes, 2*$_+1 if !vec($sieve,$_,1) } for (1..int(($end-1)/2)); @primes;
}</lang>
The fastest non-segmented pure Perl sieve, using strings for low memory. About 2x faster than the fast array version with 5.16.0 or later, about 10x faster than the golfed versions below. Uses much less memory than array versions. <lang perl>sub dj_string {
my($end) = @_; return () if $end < 2; return (2) if $end < 3; $end-- if ($end & 1) == 0; my $s_end = $end >> 1;
my $whole = int( ($end>>1) / 15); # prefill with 3 and 5 marked my $sieve = '100010010010110' . '011010010010110' x $whole; substr($sieve, ($end>>1)+1) = ; my ($n, $limit) = ( 7, int(sqrt($end)) ); while ( $n <= $limit ) { for (my $s = ($n*$n) >> 1; $s <= $s_end; $s += $n) { substr($sieve, $s, 1) = '1'; } do { $n += 2 } while substr($sieve, $n>>1, 1); } # If you just want the count, it's very fast: # my $count = 1 + $sieve =~ tr/0//; my @primes = (2, 3, 5); $n = 7-2; foreach my $s (split("0", substr($sieve, 3), -1)) { $n += 2 + 2 * length($s); push @primes, $n if $n <= $end; } @primes;
}</lang>
Golfing a bit, at the expense of speed: <lang perl>sub sieve{ my (@s, $i); grep { not $s[ $i = $_ ] and do { $s[ $i += $_ ]++ while $i <= $_[0]; 1 } } 2..$_[0] }
print join ", " => sieve 100; </lang>
Or with bit strings (much slower than the vector version above): <lang perl>sub sieve{ my ($s, $i); grep { not vec $s, $i = $_, 1 and do { (vec $s, $i += $_, 1) = 1 while $i <= $_[0]; 1 } } 2..$_[0] }
print join ", " => sieve 100; </lang>
A short recursive version: <lang perl>sub erat {
my $p = shift; return $p, $p**2 > $_[$#_] ? @_ : erat(grep $_%$p, @_)
}
print join ', ' => erat 2..100000; </lang>
Regexp:<lang perl>sub sieve { my ($s, $p) = "." . ("x" x shift);
1 while ++$p and $s =~ /^(.{$p,}?)x/g and $p = length($1) and $s =~ s/(.{$p})./${1}./g and substr($s, $p, 1) = "x"; $s }
print sieve(1000);</lang>
Here's an incremental version, which allows one to create a tied array of primes: <lang perl>use strict; use warnings; package Tie::SieveOfEratosthenes;
sub TIEARRAY { my $class = shift; bless \$class, $class; }
- If set to true, produces copious output. Observing this output
- is an excellent way to gain insight into how the algorithm works.
use constant DEBUG => 0;
- If set to true, causes the code to skip over even numbers,
- improving runtime. It does not alter the output content, only the speed.
use constant WHEEL2 => 0;
BEGIN {
# This is loosely based on the Python implementation of this task, # specifically the "Infinite generator with a faster algorithm"
my @primes = (2, 3); my $ps = WHEEL2 ? 1 : 0; my $p = $primes[$ps]; my $q = $p*$p; my $incr = WHEEL2 ? 2 : 1; my $candidate = $primes[-1] + $incr; my %sieve;
print "Initial: p = $p, q = $q, candidate = $candidate\n" if DEBUG;
sub FETCH { my $n = pop; return if $n < 0; return $primes[$n] if $n <= $#primes; OUTER: while( 1 ) {
# each key in %sieve is a composite number between # p and p-squared. Each value in %sieve is $incr x the prime # which acted as a 'seed' for that key. We use the value # to step through multiples of the seed-prime, until we find # an empty slot in %sieve. while( my $s = delete $sieve{$candidate} ) { print "$candidate a multiple of ".($s/$incr).";\t\t" if DEBUG; my $composite = $candidate + $s; $composite += $s while exists $sieve{$composite}; print "The next stored multiple of ".($s/$incr)." is $composite\n" if DEBUG; $sieve{$composite} = $s; $candidate += $incr; }
print "Candidate $candidate is not in sieve\n" if DEBUG;
while( $candidate < $q ) { print "$candidate is prime\n" if DEBUG; push @primes, $candidate; $candidate += $incr; next OUTER if exists $sieve{$candidate}; }
die "Candidate = $candidate, p = $p, q = $q" if $candidate > $q; print "Candidate $candidate is equal to $p squared;\t" if DEBUG;
# Thus, it is now time to add p to the sieve, my $step = $incr * $p; my $composite = $q + $step; $composite += $step while exists $sieve{$composite}; print "The next multiple of $p is $composite\n" if DEBUG; $sieve{$composite} = $step;
# and fetch out a new value for p from our primes array. $p = $primes[++$ps]; $q = $p * $p;
# And since $candidate was equal to some prime squared, # it's obviously composite, and we need to increment it. $candidate += $incr; print "p is $p, q is $q, candidate is $candidate\n" if DEBUG; } continue { return $primes[$n] if $n <= $#primes; } }
}
if( !caller ) { tie my (@prime_list), 'Tie::SieveOfEratosthenes'; my $limit = $ARGV[0] || 100; my $line = ""; for( my $count = 0; $prime_list[$count] < $limit; ++$count ) { $line .= $prime_list[$count]. ", "; next if length($line) <= 70; if( $line =~ tr/,// > 1 ) { $line =~ s/^(.*,) (.*, )/$2/; print $1, "\n"; } else { print $line, "\n"; $line = ""; } } $line =~ s/, \z//; print $line, "\n" if $line; }
1; </lang>
Perl 6
<lang perl6>sub sieve( Int $limit ) {
my @is-prime = False, False, True xx $limit - 1;
gather for @is-prime.kv -> $number, $is-prime { if $is-prime { take $number; @is-prime[$_] = False if $_ %% $number for $number**2 .. $limit; } }
}
(sieve 100).join(",").say;</lang>
A recursive version: <lang perl6>multi erat(Int $N) { erat 2 .. $N } multi erat(@a where @a[0] > sqrt @a[*-1]) { @a } multi erat(@a) { @a[0], erat(@a.grep: * % @a[0]) } say erat 100;</lang>
Of course, upper limits are for wusses. Here's a version using infinite streams, that just keeps going until you ^C it (works under Niecza):
<lang perl6>role Filter[Int $factor] {
method next { repeat until $.value % $factor { callsame } }
}
class Stream {
has Int $.value is rw = 1; method next { ++$.value } method filter { self but Filter[$.value] }
}
.next, say .value for Stream.new, *.filter ... *;</lang>
PHP
<lang php> function iprimes_upto($limit) {
for ($i = 2; $i < $limit; $i++) {
$primes[$i] = true;
} for ($n = 2; $n < $limit; $n++) {
if ($primes[$n]) { for ($i = $n*$n; $i < $limit; $i += $n) { $primes[$i] = false; } }
} return $primes;
} </lang>
PicoLisp
<lang PicoLisp>(de sieve (N)
(let Sieve (range 1 N) (set Sieve) (for I (cdr Sieve) (when I (for (S (nth Sieve (* I I)) S (nth (cdr S) I)) (set S) ) ) ) (filter bool Sieve) ) )</lang>
Output:
: (sieve 100) -> (2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97)
PL/I
<lang PL/I> eratos: proc options (main) reorder;
dcl i fixed bin (31); dcl j fixed bin (31); dcl n fixed bin (31); dcl sn fixed bin (31);
dcl hbound builtin; dcl sqrt builtin;
dcl sysin file; dcl sysprint file;
get list (n); sn = sqrt(n);
begin;
dcl primes(n) bit (1) aligned init ((*)((1)'1'b));
i = 2;
do while(i <= sn); do j = i ** 2 by i to hbound(primes, 1); /* Adding a test would just slow down processing! */ primes(j) = '0'b; end;
do i = i + 1 to sn until(primes(i)); end; end;
do i = 2 to hbound(primes, 1); if primes(i) then put data(i); end;
end; end eratos; </lang>
Pop11
define eratostenes(n); lvars bits = inits(n), i, j; for i from 2 to n do if bits(i) = 0 then printf('' >< i, '%s\n'); for j from 2*i by i to n do 1 -> bits(j); endfor; endif; endfor; enddefine;
PowerShell
Basic procedure
It outputs immediately so that the number can be used by the pipeline. <lang PowerShell>function Sieve ( [int] $num ) {
$isprime = @{} 2..$num | Where-Object { $isprime[$_] -eq $null } | ForEach-Object { $_ $isprime[$_] = $true $i=$_*$_ for ( ; $i -le $num; $i += $_ ) { $isprime[$i] = $false } }
}</lang>
Processing
Calculate the primes up to 1000000 with Processing, including a visualisation of the process. As an additional visual effect, the layout of the pixel could be changed from the line-by-line layout to a spiral-like layout starting in the middle of the screen. <lang java>int maxx,maxy; int max; boolean[] sieve;
void plot(int pos, boolean active) {
set(pos%maxx,pos/maxx, active?#000000:#ffffff);
}
void setup() {
size(1000, 1000, P2D); frameRate(2); maxx=width; maxy=height; max=width*height; sieve=new boolean[max+1]; sieve[1]=false; plot(0,false); plot(1,false); for(int i=2;i<=max;i++) { sieve[i]=true; plot(i,true); }
}
int i=2;
void draw() {
if(!sieve[i]) { while(i*i<max && !sieve[i]) { i++; } } if(sieve[i]) { print(i+" "); for(int j=i*i;j<=max;j+=i) { if(sieve[j]) { sieve[j]=false; plot(j,false); } } } if(i*i<max) { i++; } else { noLoop(); println("finished"); }
}</lang>
Prolog
using facts as a set of non-prime numbers
Builds a set of non-prime numbers (multiples of already visited numbers) pretty much the same way as imperative languages, by counting up in increments of p for each prime p (or 2p for odd primes). Works with SWI-Prolog.
<lang Prolog>sieve(N, [2|PS]) :- % PS is list of odd primes up to N
retractall(mult(_)), sieve_O(3,N,PS).
sieve_O(I,N,PS) :- % sieve odds from I up to N to get PS
I =< N, !, I1 is I+2, ( mult(I) -> sieve_O(I1,N,PS) ; ( I =< N / I -> ISq is I*I, DI is 2*I, add_mults(DI,ISq,N) ; true ), PS = [I|T], sieve_O(I1,N,T) ).
sieve_O(I,N,[]) :- I > N.
add_mults(DI,I,N) :-
I =< N, !, ( mult(I) -> true ; assert(mult(I)) ), I1 is I+DI, add_mults(DI,I1,N).
add_mults(_,I,N) :- I > N.</lang>
Using a priority queue
Uses a ariority queue, from the paper "The Genuine Sieve of Eratosthenes" by Melissa O'Neill. Works with YAP (Yet Another Prolog)
<lang Prolog>?- use_module(library(heaps)).
prime(2). prime(N) :- prime_heap(N, _).
prime_heap(3, H) :- list_to_heap([9-6], H). prime_heap(N, H) :-
prime_heap(M, H0), N0 is M + 2, next_prime(N0, H0, N, H).
next_prime(N0, H0, N, H) :-
\+ min_of_heap(H0, N0, _), N = N0, Composite is N*N, Skip is N+N, add_to_heap(H0, Composite, Skip, H).
next_prime(N0, H0, N, H) :-
min_of_heap(H0, N0, _), adjust_heap(H0, N0, H1), N1 is N0 + 2, next_prime(N1, H1, N, H).
adjust_heap(H0, N, H) :-
min_of_heap(H0, N, _), get_from_heap(H0, N, Skip, H1), Composite is N + Skip, add_to_heap(H1, Composite, Skip, H2), adjust_heap(H2, N, H).
adjust_heap(H, N, H) :-
\+ min_of_heap(H, N, _).</lang>
PureBasic
Basic procedure
<lang PureBasic>For n=2 To Sqr(lim)
If Nums(n)=0 m=n*n While m<=lim Nums(m)=1 m+n Wend EndIf
Next n</lang>
Working example
<lang PureBasic>Dim Nums.i(0) Define l, n, m, lim
If OpenConsole()
; Ask for the limit to search, get that input and allocate a Array Print("Enter limit for this search: ") lim=Val(Input()) ReDim Nums(lim) ; Use a basic Sieve of Eratosthenes For n=2 To Sqr(lim) If Nums(n)=#False m=n*n While m<=lim Nums(m)=#True m+n Wend EndIf Next n ;Present the result to our user PrintN(#CRLF$+"The Prims up to "+Str(lim)+" are;") m=0: l=Log10(lim)+1 For n=2 To lim If Nums(n)=#False Print(RSet(Str(n),l)+" ") m+1 If m>72/(l+1) m=0: PrintN("") EndIf EndIf Next Print(#CRLF$+#CRLF$+"Press ENTER to exit"): Input() CloseConsole()
EndIf</lang>
Output may look like;
Enter limit for this search: 750 The Prims up to 750 are; 2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97 101 103 107 109 113 127 131 137 139 149 151 157 163 167 173 179 181 191 193 197 199 211 223 227 229 233 239 241 251 257 263 269 271 277 281 283 293 307 311 313 317 331 337 347 349 353 359 367 373 379 383 389 397 401 409 419 421 431 433 439 443 449 457 461 463 467 479 487 491 499 503 509 521 523 541 547 557 563 569 571 577 587 593 599 601 607 613 617 619 631 641 643 647 653 659 661 673 677 683 691 701 709 719 727 733 739 743 Press ENTER to exit
Python
Using list lookup
<lang python>def eratosthenes(n):
multiples = [] for i in xrange(2, n+1): if i not in multiples: print i for j in xrange(i*i, n+1, i): multiples.append(j)
eratosthenes(100)</lang>
Using set lookup
The version below uses a set to store the multiples. set objects are much faster (usually O(log n)) than lists (O(n)) for checking if a given object is a member. Using the set.update method avoids explicit iteration in the interpreter, giving a further speed improvement.
<lang python>def eratosthenes2(n):
multiples = set() for i in xrange(2, n+1): if i not in multiples: print i multiples.update(xrange(i*i, n+1, i))
eratosthenes2(100)</lang>
Using array lookup
The version below uses array lookup to test for primality. The function primes_upto() is a straightforward implementation of Sieve of Eratosthenesalgorithm. It returns prime numbers less than or equal to limit. <lang python>def primes_upto(limit):
is_prime = [False] * 2 + [True] * (limit - 1) for n in xrange(int(limit**0.5 + 1.5)): # stop at ``sqrt(limit)`` if is_prime[n]: for i in xrange(n*n, limit+1, n): is_prime[i] = False return [i for i, prime in enumerate(is_prime) if prime]</lang>
Using generator
<lang python>def iprimes_upto(limit):
is_prime = [False] * 2 + [True] * (limit - 1) for n in range(limit + 1): if is_prime[n]: yield n for i in range(n*n, limit+1, n): # start at ``n`` squared is_prime[i] = False</lang>
Example: <lang python>>>> list(iprimes_upto(15)) [2, 3, 5, 7, 11, 13]</lang>
Using numpy
Below code adapted from literateprograms.org using numpy <lang python>import numpy def primes_upto2(limit):
is_prime = numpy.ones(limit + 1, dtype=numpy.bool) for n in xrange(2, int(limit**0.5 + 1.5)): if is_prime[n]: is_prime[n*n::n] = 0 return numpy.nonzero(is_prime)[0][2:]</lang>
Performance note: there is no point to add wheels here, due to execution of p[n*n::n] = 0 and nonzero() takes us almost all time.
Using wheels
Version with wheel based optimization: <lang python>from numpy import array, bool_, multiply, nonzero, ones, put, resize
def makepattern(smallprimes):
pattern = ones(multiply.reduce(smallprimes), dtype=bool_) pattern[0] = 0 for p in smallprimes: pattern[p::p] = 0 return pattern
def primes_upto3(limit, smallprimes=(2,3,5,7,11)):
sp = array(smallprimes) if limit <= sp.max(): return sp[sp <= limit] # isprime = resize(makepattern(sp), limit + 1) isprime[:2] = 0; put(isprime, sp, 1) # for n in range(sp.max() + 2, int(limit**0.5 + 1.5), 2): if isprime[n]: isprime[n*n::n] = 0 return nonzero(isprime)[0]</lang>
Examples: <lang python>>>> primes_upto3(10**6, smallprimes=(2,3)) # Wall time: 0.17 array([ 2, 3, 5, ..., 999961, 999979, 999983]) >>> primes_upto3(10**7, smallprimes=(2,3)) # Wall time: 2.13 array([ 2, 3, 5, ..., 9999971, 9999973, 9999991]) >>> primes_upto3(15) array([ 2, 3, 5, 7, 11, 13]) >>> primes_upto3(10**7, smallprimes=primes_upto3(15)) # Wall time: 1.31 array([ 2, 3, 5, ..., 9999971, 9999973, 9999991]) >>> primes_upto2(10**7) # Wall time: 1.39 <-- version without wheels array([ 2, 3, 5, ..., 9999971, 9999973, 9999991]) >>> primes_upto3(10**7) # Wall time: 1.30 array([ 2, 3, 5, ..., 9999971, 9999973, 9999991])</lang> The above-mentioned examples demonstrate that the given wheel based optimization does not show significant performance gain.
Infinite generator
A generator that will generate primes indefinitely (perhaps until it runs out of memory).
<lang python>import heapq
- generates all prime numbers
def sieve():
# priority queue of the sequences of non-primes # the priority queue allows us to get the "next" non-prime quickly nonprimes = [] i = 2 while True: if nonprimes and i == nonprimes[0][0]: # non-prime while nonprimes[0][0] == i: # for each sequence that generates this number, # have it go to the next number (simply add the prime) # and re-position it in the priority queue x = nonprimes[0] x[0] += x[1] heapq.heapreplace(nonprimes, x) else: # prime # insert a 2-element list into the priority queue: # [current multiple, prime] # the first element allows sorting by value of current multiple # we start with i^2 heapq.heappush(nonprimes, [i*i, i]) yield i i += 1</lang>
Example:
>>> foo = sieve() >>> for i in range(8): ... print(next(foo)) ... 2 3 5 7 11 13 17 19
Infinite generator with a faster algorithm
The adding of each discovered prime's incremental step info to the mapping should be postponed until the prime's square is seen amongst the candidate numbers, as it is useless before that point. This drastically reduces the space complexity from O(n)
to O(sqrt(n/log(n)))
, in n
primes produced, and also lowers the run time complexity quite low (this test entry shows about O(n^1.08)
empirical order of growth which is very close to the theoretical value of O(n log(n) log(log(n)))
, in n
primes produced):
<lang python>def primes():
yield 2 ; yield 3 ; yield 5 ; yield 7 ; ps = (p for p in primes()) # additional primes supply p = ps.next() and ps.next() # discard 2, then get 3 q = p*p # 9 - square of next prime to be put sieve = {} # into sieve dict n = 9 # the candidate number while True: if n not in sieve: # is not a multiple of previously recorded primes if n < q: # n is prime yield n else: add(sieve, q + 2*p, 2*p) # n==p*p: for prime p, under p*p + 2*p, p = ps.next() # add 2*p as incremental step q = p*p else: s = sieve.pop(n) add(sieve, n + s, s) n += 2 # work on odds only
def add(sieve,next,step):
while next in sieve: # ensure each entry is unique next += step sieve[next] = step # next non-marked multiple of a prime
import itertools def primes_up_to(limit):
return list(itertools.takewhile(lambda p: p <= limit, primes()))</lang>
R
This code is vectorised, so it runs quickly for n < one million. The allocation of the primes vector means memory usage is too high for n much larger than that. <lang R> sieve <- function(n) {
n <- as.integer(n) if(n > 1e6) stop("n too large") primes <- rep(TRUE, n) primes[1] <- FALSE last.prime <- 2L for(i in last.prime:floor(sqrt(n))) { primes[seq.int(2L*last.prime, n, last.prime)] <- FALSE last.prime <- last.prime + min(which(primes[(last.prime+1):n])) } which(primes)
}
sieve(1000) </lang>
Racket
Imperative versions
<lang Racket>
- lang racket
- ugly imperative version
(define (sieve n)
(define non-primes '()) (define primes '()) (for ([i (in-range 2 (add1 n))]) (unless (member i non-primes) (set! primes (cons i primes)) (for ([j (in-range (* i i) (add1 n) i)]) (set! non-primes (cons j non-primes))))) (reverse primes))
(sieve 100) </lang>
<lang Racket>
- lang racket
- a little nicer, but still imperative
(define (sieve n)
(define primes (make-vector (add1 n) #t)) (for* ([i (in-range 2 (add1 n))] #:when (vector-ref primes i) [j (in-range (* i i) (add1 n) i)]) (vector-set! primes j #f)) (for/list ([n (in-range 2 (add1 n))] #:when (vector-ref primes n)) n))
(sieve 100) </lang>
Infinite list using laziness
<lang Racket>
- lang lazy
- infinite list using lazy racket (see the language above)
(define nats (cons 1 (map add1 nats))) (define (sift n l) (filter (λ(x) (not (zero? (modulo x n)))) l)) (define (sieve l) (cons (first l) (sieve (sift (first l) (rest l))))) (define primes (sieve (rest nats)))
(define (take-upto n l)
(if (<= (car l) n) (cons (car l) (take-upto n (cdr l))) '()))
(!! (take-upto 100 primes)) </lang>
Infinite list using threads and channels
<lang Racket>
- lang racket
- infinite list using threads and channels (similar to newsqueak)
(define-syntax (bg-loop stx)
(syntax-case stx () [(_ expr ...) (with-syntax ([out! (datum->syntax stx 'out!)]) #'(let ([out (make-channel)]) (define (out! x) (channel-put out x)) (thread (λ() (let loop () expr ... (loop)))) out))]))
(define nats (bg-loop (for ([i (in-naturals 1)]) (out! i)))) (define (filter pred? c)
(bg-loop (define x (channel-get c)) (when (pred? x) (out! x))))
(define (sift n c)
(filter (λ(x) (not (zero? (modulo x n)))) c))
(define (sieve c)
(bg-loop (define x (channel-get c)) (out! x) (set! c (sift x c))))
(define primes (begin (channel-get nats) (sieve nats)))
(define (take-upto n c)
(let loop () (let ([x (channel-get c)]) (if (<= x n) (cons x (loop)) '()))))
(take-upto 100 primes) </lang>
Infinite list using generators
<lang Racket>
- lang racket
- yet another variation of the same algorithm, this time using generators
(require racket/generator)
(define nats (generator () (for ([i (in-naturals 1)]) (yield i)))) (define (filter pred g)
(generator () (for ([i (in-producer g #f)] #:when (pred i)) (yield i))))
(define (sift n g) (filter (λ(x) (not (zero? (modulo x n)))) g)) (define (sieve g)
(generator () (let loop ([g g]) (let ([x (g)]) (yield x) (loop (sift x g))))))
(define primes (begin (nats) (sieve nats)))
(define (take-upto n p)
(let loop () (let ([x (p)]) (if (<= x n) (cons x (loop)) '()))))
(take-upto 100 primes) </lang>
REXX
no wheel version
The first three REXX versions makes use of a sparse stemmed array: [@.].
As the stemmed array gets heavily populated, the number of entries may slow down the REXX interpreter
substantially, depending upon the efficacy of the hashing technique being used for REXX variables (setting/retrieving).
<lang REXX>/*REXX program generates primes via the sieve of Eratosthenes algorithm.*/
parse arg H .; if H== then H=200 /*let the highest # be specified.*/
w = length(H); prime=right('prime',20) /*W is used for formatting output*/
@.=1 /*assume all numbers are prime. */
- =0 /*number of primes found so far. */
do j=2 to H /*all integers up to H inclusive.*/ if @.j then do; #=#+1 /*Prime? Then bump prime counter*/ say prime right(#,w) " ───► " right(j,w) /*show.*/ do m=j*j to H by j; @.m=0; end /*odd multiples*/ end /*plain*/ /*[↑] strike odd multiples ¬prime*/ end /*j*/ /*stick a fork in it, we're done.*/</lang>
output when using the input default of 200
prime 1 ───► 2 prime 2 ───► 3 prime 3 ───► 5 prime 4 ───► 7 prime 5 ───► 11 prime 6 ───► 13 prime 7 ───► 17 prime 8 ───► 19 prime 9 ───► 23 prime 10 ───► 29 prime 11 ───► 31 prime 12 ───► 37 prime 13 ───► 41 prime 14 ───► 43 prime 15 ───► 47 prime 16 ───► 53 prime 17 ───► 59 prime 18 ───► 61 prime 19 ───► 67 prime 20 ───► 71 prime 21 ───► 73 prime 22 ───► 79 prime 23 ───► 83 prime 24 ───► 89 prime 25 ───► 97 prime 26 ───► 101 prime 27 ───► 103 prime 28 ───► 107 prime 29 ───► 109 prime 30 ───► 113 prime 31 ───► 127 prime 32 ───► 131 prime 33 ───► 137 prime 34 ───► 139 prime 35 ───► 149 prime 36 ───► 151 prime 37 ───► 157 prime 38 ───► 163 prime 39 ───► 167 prime 40 ───► 173 prime 41 ───► 179 prime 42 ───► 181 prime 43 ───► 191 prime 44 ───► 193 prime 45 ───► 197 prime 46 ───► 199
wheel version with optional prime list suppression
This version skips striking the even numbers (as being not prime).
Also supported is the suppression of listing the primes if the H (high limit) is negative.
Also added is a final message indicating the number of primes found.
<lang rexx>/*REXX pgm gens primes via a wheeled sieve of Eratosthenes algorithm.*/
parse arg H .; if H== then H=200 /*high# can be specified on C.L. */
tell=h>0; H=abs(H); w=length(H) /*neg H suppresses prime listing.*/
if 2<=H & tell then say right(1,w+20)'st prime ───► ' right(2,w)
skip=0 /*skips top part sieve striking. */
@.=1 /*assume all numbers are prime. */
- =1 /*number of primes found so far. */
do j=3 by 2 to H /*odd integers up to H inclusive.*/ if @.j then do; #=#+1 /*Prime? Then bump prime counter*/ if tell then say right(#,w+20)th(#) 'prime ───► ' right(j,w) if skip then iterate /*should the top part be skipped?*/ if j*j>H then skip=1 /*indicate skipping if j > √ H. */ do m=j*j to H by j+j; @.m=0; end /*odd multiples.*/ end /*plain*/ /*[↑] strike odd multiples ¬prime*/ end /*j*/
say; say right(#,w+20+2) 'prime's(#) "found." exit /*stick a fork in it, we're done.*/ /*──────────────────────────────────S subroutine────────────────────────*/ s: if arg(1)==1 then return arg(3); return word(arg(2) 's',1) /*plural*/ /*──────────────────────────────────TH subroutine───────────────────────*/ th: procedure;parse arg x;x=abs(x);return word('th st nd rd',1+x//10*(x//100%10\==1)*(x//10<4))</lang> output when using the input default of 200
1st prime ───► 2 2nd prime ───► 3 3rd prime ───► 5 4th prime ───► 7 5th prime ───► 11 6th prime ───► 13 7th prime ───► 17 8th prime ───► 19 9th prime ───► 23 10th prime ───► 29 11th prime ───► 31 12th prime ───► 37 13th prime ───► 41 14th prime ───► 43 15th prime ───► 47 16th prime ───► 53 17th prime ───► 59 18th prime ───► 61 19th prime ───► 67 20th prime ───► 71 21st prime ───► 73 22nd prime ───► 79 23rd prime ───► 83 24th prime ───► 89 25th prime ───► 97 26th prime ───► 101 27th prime ───► 103 28th prime ───► 107 29th prime ───► 109 30th prime ───► 113 31st prime ───► 127 32nd prime ───► 131 33rd prime ───► 137 34th prime ───► 139 35th prime ───► 149 36th prime ───► 151 37th prime ───► 157 38th prime ───► 163 39th prime ───► 167 40th prime ───► 173 41st prime ───► 179 42nd prime ───► 181 43rd prime ───► 191 44th prime ───► 193 45th prime ───► 197 46th prime ───► 199 46 primes found.
output when using the input of: -1000
168 primes found.
output when using the input of: -10000
1229 primes found.
output when using the input of: -100000
9592 primes found.
output when using the input of: -1000000
78498 primes found.
output when using the input of: -10000000
664579 primes found.
output when using the input of: -100000000
13 +++ @.m=0 Error 5 running "C:\sieve_of_Eratosthenes.rex", line 13: System resources exhausted
The above shows one of the weaknesses of this implementation of the Sieve of Eratosthenes: it must keep an array of all (if not most) values which is used to strike out composite numbers.
The System resources exhausted error can be delayed by implementing further optimization to the wheel version.
wheel version
This version skips striking the even numbers (as being not prime).
It also uses a short-circuit test for striking out composites ≤ √target.
<lang rexx>/*REXX pgm gens primes via a wheeled sieve of Eratosthenes algorithm.*/
parse arg H .; if H== then H=200 /*high# can be specified on C.L. */
w=length(H); prime=right('prime',20) /*W is used for formatting output*/
if 2<=H then say prime right(1,w) " ───► " right(2,w)
skip=0 /*skips top part sieve striking. */
@.=1 /*assume all numbers are prime. */
- =1 /*number of primes found so far. */
do j=3 by 2 to H /*odd integers up to H inclusive.*/ if @.j then do; #=#+1 /*Prime? Then bump prime counter*/ say prime right(#,w) " ───► " right(j,w) /*show.*/ if skip then iterate /*should the top part be skipped?*/ if j*j>H then skip=1 /*indicate skipping if j > √ H. */ do m=j*j to H by j+j; @.m=0; end /*odd multiples.*/ end /*plain*/ /*[↑] strike odd multiples ¬prime*/ end /*j*/ /*stick a fork in it, we're done.*/</lang>
output is identical to the first (non-wheel) version; program execution is twice as fast as the non-wheel version.
The addition of the short-circuit test makes it about another 20% faster.
Wheel Version restructured
<lang rexx>/*REXX program generates primes via sieve of Eratosthenes algorithm.
- 21.07.2012 Walter Pachl derived from above Rexx version
- avoid symbols @ and # (not supported by ooRexx)
- avoid negations (think positive)
- /
highest=200 /*define highest number to use. */ is_prime.=1 /*assume all numbers are prime. */ w=length(highest) /*width of the biggest number, */ /* it's used for aligned output.*/ Do j=3 To highest By 2, /*strike multiples of odd ints. */ While j*j<=highest /* up to sqrt(highest) */ If is_prime.j Then Do Do jm=j*3 To highest By j+j /*start with next odd mult. of J */ is_prime.jm=0 /*mark odd mult. of J not prime. */ End End End np=0 /*number of primes shown */ Call tell 2 Do n=3 To highest By 2 /*list all the primes found. */ If is_prime.n Then Do Call tell n End End Exit
tell: Parse Arg prime
np=np+1 Say ' prime number' right(np,w) " --> " right(prime,w) Return</lang>
output is identical to the above versions.
Program execution time is slightly worse than that of the wheel version above
(tested with highest=2000000 and suppressed output: 2.4 seconds vs. 2.3 seconds).
Ruby
eratosthenes starts with nums = [nil, nil, 2, 3, 4, 5, ..., n]
, then marks ( the nil setting ) multiples of 2, 3, 5, 7, ...
there, then returns all non-nil numbers which are the primes.
<lang ruby>def eratosthenes(n)
nums = [nil, nil, *2..n] (2..Math.sqrt(n)).each do |i| (i**2..n).step(i){|m| nums[m] = nil} if nums[i] end nums.compact
end
p eratosthenes(100)</lang>
[2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97]
With a wheel
eratosthenes2 adds more optimizations, but the code is longer.
- The array
nums
only tracks odd numbers (skips multiples of 2). - The array
nums
holds booleans instead of integers, and every multiple of 3 beginsfalse
. - The outer loop skips multiples of 2 and 3.
- Both inner loops skip multiples of 2 and 3.
<lang ruby>def eratosthenes2(n)
# For odd i, if i is prime, nums[i >> 1] is true. # Set false for all multiples of 3. nums = [true, false, true] * ((n + 5) / 6) nums[0] = false # 1 is not prime. nums[1] = true # 3 is prime.
# Outer loop and both inner loops are skipping multiples of 2 and 3. # Outer loop checks i * i > n, same as i > Math.sqrt(n). i = 5 until (m = i * i) > n if nums[i >> 1] i_times_2 = i << 1 i_times_4 = i << 2 while m <= n nums[m >> 1] = false m += i_times_2 nums[m >> 1] = false m += i_times_4 # When i = 5, skip 45, 75, 105, ... end end i += 2 if nums[i >> 1] m = i * i i_times_2 = i << 1 i_times_4 = i << 2 while m <= n nums[m >> 1] = false m += i_times_4 # When i = 7, skip 63, 105, 147, ... nums[m >> 1] = false m += i_times_2 end end i += 4 end
primes = [2] nums.each_index {|i| primes << (i * 2 + 1) if nums[i]} primes.pop while primes.last > n primes
end
p eratosthenes2(100)</lang>
This simple benchmark compares eratosthenes with eratosthenes2.
<lang ruby>require 'benchmark' Benchmark.bmbm {|x|
x.report("eratosthenes") { eratosthenes(1_000_000) } x.report("eratosthenes2") { eratosthenes2(1_000_000) }
}</lang>
eratosthenes2 runs about 4 times faster than eratosthenes.
With the standard library
MRI 1.9.x implements the sieve of Eratosthenes at file prime.rb, class EratosthensesSeive
(around line 421). This implementation optimizes for space, by packing the booleans into 16-bit integers. It also hardcodes all primes less than 256.
<lang ruby>require 'prime' p Prime::EratosthenesGenerator.new.take_while {|i| i <= 100}</lang>
Run BASIC
<lang runbasic>input "Gimme the limit:"; limit dim flags(limit) for i = 2 to limit
for k = i*i to limit step i flags(k) = 1 next k
if flags(i) = 0 then print i;", "; next i</lang>
Gimme the limit:?100 2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97,
Rust
Sieve of Eratosthenes - No optimization
<lang rust>use std::vec; use std::num; use std::iter;
fn int_sqrt(n: uint) -> uint {
num::sqrt(n as f64) as uint
}
fn simple_sieve(limit: uint) -> ~[uint] {
if limit < 2 { return ~[]; } let mut primes = vec::from_elem(limit + 1, true);
for prime in iter::range_inclusive(2, int_sqrt(limit) + 1) { if primes[prime] { for multiple in iter::range_step(prime * prime, limit + 1, prime) { primes[multiple] = false } } } iter::range_inclusive(2, limit).filter(|&n| primes[n]).collect()
}
fn main() {
println!("{:?}", simple_sieve(100))
}</lang>
- Output:
~[2u, 3u, 5u, 7u, 11u, 13u, 17u, 19u, 23u, 29u, 31u, 37u, 41u, 43u, 47u, 53u, 59u, 61u, 67u, 71u, 73u, 79u, 83u, 89u, 97u]
Scala
Genuine Eratosthenes sieve
<lang Scala>def sieveOfEratosthenes(nTo: Int) = {
val primes = collection.mutable.BitSet.empty.par ++ (2 +: (3 to nTo by 2)) for { candidate <- 3 until Math.sqrt(nTo).toInt if primes contains candidate } primes --= candidate * candidate to nTo by candidate primes
} // BitSet toList is shuffled.
println(sieveOfEratosthenes(101).toList.sorted)</lang>
- Output:
List(2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97, 101)
Sub-optimal tail recursive trial division
Not a sieve of Eratosthenes. Tries to divide by all primes below number instead of those not greater than the square root of the number. <lang Scala> import scala.annotation.tailrec
/* * Sieve of primes: returns all primes between 2 and nTo including. */ def sieve(nTo: Int): Seq[Int] = { @tailrec def inner(i: Int, primes: Seq[Int]): Seq[Int] = { if (i > nTo) primes else { if (primes exists (i % _ == 0)) inner(i + 2, primes) else inner(i + 2, primes :+ i) } } if (nTo < 2) Seq.empty else inner(3, Seq(2)) }
// Print the resulting list in a table. val lineLength = 30 for (l <- 0 to 599 by lineLength) { @tailrec def inner(primes: Seq[Int], pos: Int, endPos: Int, acc: String): String = { if (pos >= endPos) acc else inner(primes, pos + 1, endPos, acc + (if (primes contains pos) f"$pos%3d" else f"${'.'}%3s")) }
println(inner(sieve(599), l, l + lineLength, ""))
}</lang>
- Output:
. . 2 3 . 5 . 7 . . . 11 . 13 . . . 17 . 19 . . . 23 . . . . . 29 . 31 . . . . . 37 . . . 41 . 43 . . . 47 . . . . . 53 . . . . . 59 . 61 . . . . . 67 . . . 71 . 73 . . . . . 79 . . . 83 . . . . . 89 . . . . . . . 97 . . .101 .103 . . .107 .109 . . .113 . . . . . . . . . . . . .127 . . .131 . . . . .137 .139 . . . . . . . . .149 .151 . . . . .157 . . . . .163 . . .167 . . . . .173 . . . . .179 .181 . . . . . . . . .191 .193 . . .197 .199 . . . . . . . . . . .211 . . . . . . . . . . .223 . . .227 .229 . . .233 . . . . .239 .241 . . . . . . . . .251 . . . . .257 . . . . .263 . . . . .269 .271 . . . . .277 . . .281 .283 . . . . . . . . .293 . . . . . . . . . . . . .307 . . .311 .313 . . .317 . . . . . . . . . . . . .331 . . . . .337 . . . . . . . . .347 .349 . . .353 . . . . .359 . . . . . . .367 . . . . .373 . . . . .379 . . .383 . . . . .389 . . . . . . .397 . . .401 . . . . . . .409 . . . . . . . . .419 .421 . . . . . . . . .431 .433 . . . . .439 . . .443 . . . . .449 . . . . . . .457 . . .461 .463 . . .467 . . . . . . . . . . .479 . . . . . . .487 . . .491 . . . . . . .499 . . .503 . . . . .509 . . . . . . . . . . .521 .523 . . . . . . . . . . . . . . . . .541 . . . . .547 . . . . . . . . .557 . . . . .563 . . . . .569 .571 . . . . .577 . . . . . . . . .587 . . . . .593 . . . . .599
The "unfaithful sieve" using Streams
Using Streams, the "unfaithful sieve", i.e. sub-optimal trial division sieve. Not a sieve of Eratosthenes. <lang scala>import scala.language.postfixOps
def sieve(nums: Stream[Int]): Stream[Int] = Stream.cons(nums.head, sieve((nums.tail) filter (_ % nums.head != 0))) val primes = 2 #:: sieve(Stream.from(3, 2))
println(primes take 10 toList) // //List(2, 3, 5, 7, 11, 13, 17, 19, 23, 29) println(primes takeWhile (_ < 30) toList) //List(2, 3, 5, 7, 11, 13, 17, 19, 23, 29)</lang>
- Output:
Both println statements give the same results
List(2, 3, 5, 7, 11, 13, 17, 19, 23, 29)
Scheme
<lang scheme>; Tail-recursive solution : (define (sieve n)
(define (aux u v) (let ((p (car v))) (if (> (* p p) n) (let rev-append ((u u) (v v)) (if (null? u) v (rev-append (cdr u) (cons (car u) v)))) (aux (cons p u) (let wheel ((u '()) (v (cdr v)) (a (* p p))) (cond ((null? v) (reverse u)) ((= (car v) a) (wheel u (cdr v) (+ a p))) ((> (car v) a) (wheel u v (+ a p))) (else (wheel (cons (car v) u) (cdr v) a)))))))) (aux '(2) (let range ((v '()) (k (if (odd? n) n (- n 1)))) (if (< k 3) v (range (cons k v) (- k 2))))))
- > (sieve 100)
- (2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97)
- > (length (sieve 10000000))
- 664579</lang>
<lang scheme>; Simpler solution, with the penalty that none of 'iota, 'strike or 'sieve is tail-recursive : (define (iota start stop stride)
(if (> start stop) (list) (cons start (iota (+ start stride) stop stride))))
(define (strike lst start stride)
(cond ((null? lst) lst) ((= (car lst) start) (strike (cdr lst) (+ start stride) stride)) ((> (car lst) start) (strike lst (+ start stride) stride)) (else (cons (car lst) (strike (cdr lst) start stride)))))
(define (primes limit)
(let ((stop (sqrt limit))) (define (sieve lst) (let ((p (car lst))) (if (> p stop) lst (cons p (sieve (strike (cdr lst) (* p p) p)))))) (sieve (iota 2 limit 1))))
(display (primes 100)) (newline)</lang> Output: <lang>(2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97)</lang> Optimised using a pre-computed wheel based on 2 (i.e. odds only): <lang scheme>(define (primes-wheel-2 limit)
(let ((stop (sqrt limit))) (define (sieve lst) (let ((p (car lst))) (if (> p stop) lst (cons p (sieve (strike (cdr lst) (* p p) (* 2 p))))))) (cons 2 (sieve (iota 3 limit 2)))))
(display (primes-wheel-2 100)) (newline)</lang> Output: <lang>(2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97)</lang>
Vector-based (faster), works with R RS: <lang scheme>; initialize v to vector of sequential integers (define (initialize! v)
(define (iter v n) (if (>= n (vector-length v)) (values) (begin (vector-set! v n n) (iter v (+ n 1))))) (iter v 0))
- set every nth element of vector v to 0,
- starting with element m
(define (strike! v m n)
(cond ((>= m (vector-length v)) (values)) (else (begin (vector-set! v m 0) (strike! v (+ m n) n)))))
- lowest non-zero index of vector v >= n
(define (nextprime v n)
(if (zero? (vector-ref v n)) (nextprime v (+ n 1)) (vector-ref v n)))
- remove elements satisfying pred? from list lst
(define (remove pred? lst)
(cond ((null? lst) '()) ((pred? (car lst))(remove pred? (cdr lst))) (else (cons (car lst) (remove pred? (cdr lst))))))
- the sieve itself
(define (sieve n)
(define stop (sqrt n)) (define (iter v p) (cond ((> p stop) v) (else (begin (strike! v (* p p) p) (iter v (nextprime v (+ p 1))))))) (let ((v (make-vector (+ n 1)))) (initialize! v) (vector-set! v 1 0) ; 1 is not a prime (remove zero? (vector->list (iter v 2)))))</lang>
Seed7
The program below computes the number of primes between 1 and 10000000: <lang seed7>$ include "seed7_05.s7i";
const func set of integer: eratosthenes (in integer: n) is func
result var set of integer: sieve is EMPTY_SET; local var integer: i is 0; var integer: j is 0; begin sieve := {2 .. n}; for i range 2 to sqrt(n) do if i in sieve then for j range i ** 2 to n step i do excl(sieve, j); end for; end if; end for; end func;
const proc: main is func
begin writeln(card(eratosthenes(10000000))); end func;</lang>
Original source: [1]
SNOBOL4
Using strings instead of arrays, and the square/sqrt optimizations.
<lang SNOBOL4> define('sieve(n)i,j,k,p,str,res') :(sieve_end) sieve i = lt(i,n - 1) i + 1 :f(sv1)
str = str (i + 1) ' ' :(sieve)
sv1 str break(' ') . j span(' ') = :f(return)
sieve = sieve j ' ' sieve = gt(j ^ 2,n) sieve str :s(return) ;* Opt1 res = str (arb ' ') @p ((j ^ 2) ' ') ;* Opt2 str len(p) . res = ;* Opt2
sv2 str break(' ') . k span(' ') = :f(sv3)
res = ne(remdr(k,j),0) res k ' ' :(sv2)
sv3 str = res :(sv1) sieve_end
- # Test and display
output = sieve(100)
end</lang>
Output:
2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97
Tcl
<lang tcl>package require Tcl 8.5
proc sieve n {
if {$n < 2} {return {}} # create a container to hold the sequence of numbers. # use a dictionary for its speedy access (like an associative array) # and for its insertion order preservation (like a list) set nums [dict create] for {set i 2} {$i <= $n} {incr i} { # the actual value is never used dict set nums $i "" } set primes [list] while {[set nextPrime [lindex [dict keys $nums] 0]] <= sqrt($n)} { dict unset nums $nextPrime for {set i [expr {$nextPrime ** 2}]} {$i <= $n} {incr i $nextPrime} { dict unset nums $i } lappend primes $nextPrime } return [concat $primes [dict keys $nums]]
}
puts [sieve 100] ;# 2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97</lang>
UNIX Shell
With array
<lang bash>#!/usr/bin/zsh
function primes() { typeset -a a typeset i j
a[1]="" for (( i = 2; i <= $1; i++ )); do a[$i]=$i done
for (( i = 2; i * i <= $1; i++ )); do if [[ ! -z $a[$i] ]]; then for (( j = i * i; j <= $1; j += i )); do a[$j]="" done fi done print $a }
primes 1000</lang>
<lang bash>function primes { typeset a i=2 j m=$1 # No for (( ... )) loop in pdksh. Use while loop. while (( i <= m )); do a[$i]=$i (( i++ )) done
i=2 while (( j = i * i, j <= m )); do if [[ -n ${a[$i]} ]]; then while (( j <= m )); do unset a[$j] (( j += i )) done fi (( i++ )) done # No print command in bash. Use echo command. echo ${a[*]} }
primes 1000</lang>
Both scripts output a single long line.
2 3 5 7 11 13 17 19 23 ... 971 977 983 991 997
Using variables as fake array
Bourne Shell and Almquist Shell have no arrays. This script works with bash or dash (standard shell in Ubuntu), but uses no specifics of the shells, so it works with plain Bourne Shell as well.
<lang bash>#! /bin/sh
LIMIT=1000
- As a workaround for missing arrays, we use variables p2, p3, ...,
- p$LIMIT, to represent the primes. Values are true or false.
- eval p$i=true # Set value.
- eval \$p$i # Run command: true or false.
- A previous version of this script created a temporary directory and
- used files named 2, 3, ..., $LIMIT to represent the primes. We now use
- variables so that a killed script does not leave extra files. About
- performance, variables are about as slow as files.
i=2 while [ $i -le $LIMIT ] do
eval p$i=true # was touch $i i=`expr $i + 1`
done
i=2 while
j=`expr $i '*' $i` [ $j -le $LIMIT ]
do
if eval \$p$i # was if [ -f $i ] then while [ $j -le $LIMIT ] do eval p$j=false # was rm -f $j j=`expr $j + $i` done fi i=`expr $i + 1`
done
- was echo `ls|sort -n`
echo `i=2
while [ $i -le $LIMIT ]; do eval \\$p$i && echo $i i=\`expr $i + 1\` done`</lang>
With piping
This version works by piping 1s and 0s through sed. The string of 1s and 0s represents the array of primes.
<lang bash># Fill $1 characters with $2. fill () { # This pipeline would begin # head -c $1 /dev/zero | ... # but some systems have no head -c. Use dd. dd if=/dev/zero bs=$1 count=1 2>/dev/null | tr '\0' $2 }
filter () { # Use sed to put an 'x' after each multiple of $1, remove # first 'x', and mark non-primes with '0'. sed -e s/$2/\&x/g -e s/x// -e s/.x/0/g | { if expr $1 '*' $1 '<' $3 > /dev/null; then filter `expr $1 + 1` .$2 $3 else cat fi } }
- Generate a sequence of 1s and 0s indicating primality.
oz () { fill $1 1 | sed s/1/0/ | filter 2 .. $1 }
- Echo prime numbers from 2 to $1.
prime () { # Escape backslash inside backquotes. sed sees one backslash. echo `oz $1 | sed 's/./&\\ /g' | grep -n 1 | sed s/:1//` }
prime 1000</lang>
C Shell
<lang csh># Sieve of Eratosthenes: Echoes all prime numbers through $limit. @ limit = 80
if ( ( $limit * $limit ) / $limit != $limit ) then echo limit is too large, would cause integer overflow. exit 1 endif
- Use $prime[2], $prime[3], ..., $prime[$limit] as array of booleans.
- Initialize values to 1 => yes it is prime.
set prime=( `repeat $limit echo 1` )
- Find and echo prime numbers.
@ i = 2 while ( $i <= $limit ) if ( $prime[$i] ) then echo $i
# For each multiple of i, set 0 => no it is not prime. # Optimization: start at i squared. @ m = $i * $i while ( $m <= $limit ) set prime[$m] = 0 @ m += $i end endif @ i += 1 end</lang>
Ursala
with no optimizations <lang Ursala>#import nat
sieve = ~<{0,1}&& iota; @NttPX ~&r->lx ^/~&rhPlC remainder@rlX~|@r</lang> test program: <lang Ursala>#cast %nL
example = sieve 50</lang> output:
<2,3,5,7,11,13,17,19,23,29,31,37,41,43,47>
Vala
Without any optimizations: <lang vala> using Gee;
ArrayList<int> primes(int limit){ var sieve = new ArrayList<bool>(); var prime_list = new ArrayList<int>();
for(int i = 0; i <= limit; i++){ sieve.add(true); }
sieve[0] = false; sieve[1] = false;
for (int i = 2; i <= limit/2; i++){ if (sieve[i] != false){ for (int j = 2; i*j <= limit; j++){ sieve[i*j] = false; } } }
for (int i = 0; i < sieve.size; i++){ if (sieve[i] != false){ prime_list.add(i); } }
return prime_list; } // end primes
public static void main(){ var prime_list = primes(50);
foreach(var prime in prime_list) stdout.printf("%s ", prime.to_string());
stdout.printf("\n"); } </lang>
Output:
2 3 5 7 11 13 17 19 23 29 31 37 41 43 47
Vedit macro language
This implementation uses an edit buffer as an array for flags. After the macro has been run, you can see how the primes are located in the array. Primes are marked with 'P' and non-primes with '-'. The first character position represents number 0.
#10 = Get_Num("Enter number to search to: ", STATLINE) Buf_Switch(Buf_Free) // Use edit buffer as flags array Ins_Text("--") // 0 and 1 are not primes Ins_Char('P', COUNT, #10-1) // init rest of the flags to "prime" for (#1 = 2; #1*#1 < #10; #1++) { Goto_Pos(#1) if (Cur_Char=='P') { // this is a prime number for (#2 = #1*#1; #2 <= #10; #2 += #1) { Goto_Pos(#2) Ins_Char('-', OVERWRITE) } } }
Sample output showing numbers in range 0 to 599.
--PP-P-P---P-P---P-P---P-----P-P-----P---P-P---P-----P-----P -P-----P---P-P-----P---P-----P-------P---P-P---P-P---P------ -------P---P-----P-P---------P-P-----P-----P---P-----P-----P -P---------P-P---P-P-----------P-----------P---P-P---P-----P -P---------P-----P-----P-----P-P-----P---P-P---------P------ -------P---P-P---P-------------P-----P---------P-P---P-----P -------P-----P-----P---P-----P-------P---P-------P---------P -P---------P-P-----P---P-----P-------P---P-P---P-----------P -------P---P-------P---P-----P-----------P-P---------------- -P-----P---------P-----P-----P-P-----P---------P-----P-----P
Visual Basic .NET
<lang vbnet>Dim n As Integer, k As Integer, limit As Integer Console.WriteLine("Enter number to search to: ") limit = Console.ReadLine Dim flags(limit) As Integer For n = 2 To Math.Sqrt(limit)
If flags(n) = 0 Then For k = n * n To limit Step n flags(k) = 1 Next k End If
Next n
' Display the primes For n = 2 To limit
If flags(n) = 0 Then Console.WriteLine(n) End If
Next n</lang>
Vorpal
<lang vorpal> self.print_primes = method(m){
p = new() p.fill(0, m, 1, true)
count = 0 i = 2 while(i < m){ if(p[i] == true){ p.fill(i+i, m, i, false) count = count + 1 } i = i + 1 } ('primes: ' + count + ' in ' + m).print() for(i = 2, i < m, i = i + 1){ if(p[i] == true){ ( + i + ', ').put() } } .print()
}
self.print_primes(100) </lang> Result:
primes: 25 in 100 2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97,
XPL0
<lang XPL0>include c:\cxpl\codes; \intrinsic 'code' declarations int Size, Prime, I, Kill; char Flag; [Size:= IntIn(0); Flag:= Reserve(Size+1); for I:= 2 to Size do Flag(I):= true; for I:= 2 to Size do
if Flag(I) then \found a prime [Prime:= I; IntOut(0, Prime); CrLf(0); Kill:= Prime + Prime; \first multiple to kill while Kill <= Size do [Flag(Kill):= false; \zero a non-prime Kill:= Kill + Prime; \next multiple ]; ];
]</lang>
Example output:
20 2 3 5 7 11 13 17 19