Extreme floating point values
You are encouraged to solve this task according to the task description, using any language you may know.
The IEEE floating point specification defines certain 'extreme' floating point values such as minus zero, -0.0, a value distinct from plus zero; not a number, NaN; and plus and minus infinity.
The task is to use expressions involving other 'normal' floating point values in your language to calculate these, (and maybe other), extreme floating point values in your language and assign them to variables. Print the values of these variables if possible; and show some arithmetic with these values and variables. If your language can directly enter these extreme floating point values then show it.
C.f:
- What Every Computer Scientist Should Know About Floating-Point Arithmetic
- Infinity
- Detect division by zero
- Literals/Floating point
Ada
The language specifies model floating-point numbers independent of the underlying hardware. Even if the machine numbers are IEEE 754, the user-defined floating-point numbers are guaranteed to have no IEEE 754 semantics. In particular, their values do not include any non-numeric ideals. Constraint_Error exception is propagated when the result of a numeric operation assigned to a floating-point variable is not in the range (the range is always numeric).
For performance reasons, the built-in floating-point types like Float and Long_Float are allowed to have IEEE 754 semantics if the machine numbers are IEEE 754. But the language provides means to exclude all non numbers from these types by defining a subtype with an explicit range: <lang Ada> subtype Consistent_Float is Float range Float'Range; -- No IEEE ideals </lang> In general in properly written Ada programs variables may not become invalid when standard numeric operations are applied. The language also provides the attribute 'Valid to verify values obtained from unsafe sources e.g. from input, unchecked conversions etc.
As stated above on a machine where Float is implemented by an IEEE 754 machine number, IEEE 754 is permitted leak through. The following program illustrates how this leak can be exploited: <lang Ada> with Ada.Text_IO; use Ada.Text_IO;
procedure IEEE is -- Non portable, bad, never do this!
Zero : Float := 0.0; PInf : Float := 1.0 / Zero; NInf : Float := -PInf; PZero : Float := 1.0 / PInf; NZero : Float := 1.0 / NInf; NaN : Float := 0.0 / Zero;
begin
Put_Line (" -oo = " & Float'Image (NInf)); Put_Line (" +oo = " & Float'Image (PInf)); Put_Line (" NaN = " & Float'Image (NaN)); Put_Line (" -0 = " & Float'Image (NZero));
Put_Line (" -oo < first " & Boolean'Image (NInf < Float'First)); Put_Line (" +oo > last " & Boolean'Image (PInf > Float'Last)); Put_Line (" NaN = NaN " & Boolean'Image (NaN = NaN)); Put_Line (" -0 = 0 " & Boolean'Image (NZero = 0.0)); Put_Line (" +0 = 0 " & Boolean'Image (PZero = 0.0)); Put_Line (" +0 < least positive " & Boolean'Image (PZero < Float'Succ (Zero))); Put_Line (" -0 > biggest negative " & Boolean'Image (NZero > Float'Pred (Zero)));
-- Validness checks Put_Line ("Valid -oo is " & Boolean'Image (NInf'Valid)); Put_Line ("Valid +oo is " & Boolean'Image (PInf'Valid)); Put_Line ("Valid NaN is " & Boolean'Image (NaN'Valid));
end IEEE; </lang> The expression -1.0 / 0.0 were non-numeric and thus could not be used. To fool the compiler the variable Zero is used, which circumvents type checks giving desired broken result.
- Output:
-oo = -Inf******* +oo = +Inf******* NaN = NaN******** -0 = -0.00000E+00 -oo < first TRUE +oo > last TRUE NaN = NaN FALSE -0 = 0 TRUE +0 = 0 TRUE +0 < least positive TRUE -0 > biggest negative TRUE Valid -oo is FALSE Valid +oo is FALSE Valid NaN is FALSE
AWK
The One True Awk (nawk) uses the native floating-point numbers. We can get the extreme values if these are IEEE numbers. (If you run Awk on a VAX, there are no signed zeros, infinities nor NaN on a VAX.)
Awk raises a fatal error if a program divides by zero. If a call to exp(x), log(x) and sqrt(x) goes out of range, Awk displays a warning and changes the result to 1. Therefore tricks like 1 / 0, or log(0), or sqrt(-1), will not provide the extreme values. There remains some loopholes. Awk never checks for overflow, so we can still get positive or negative infinity. When we have infinity, we can get NaN.
<lang awk>BEGIN { # This requires 1e400 to overflow to infinity. nzero = -0 nan = 0 * 1e400 pinf = 1e400 ninf = -1e400
print "nzero =", nzero print "nan =", nan print "pinf =", pinf print "ninf =", ninf print
# When y == 0, sign of x decides if atan2(y, x) is 0 or pi. print "atan2(0, 0) =", atan2(0, 0) print "atan2(0, pinf) =", atan2(0, pinf) print "atan2(0, nzero) =", atan2(0, nzero) print "atan2(0, ninf) =", atan2(0, ninf) print
# From least to most: ninf, -1e200, 1e200, pinf. print "ninf * -1 =", ninf * -1 print "pinf * -1 =", pinf * -1 print "-1e200 > ninf?", (-1e200 > ninf) ? "yes" : "no" print "1e200 < pinf?", (1e200 < pinf) ? "yes" : "no" print
# NaN spreads from input to output. print "nan test:", (1 + 2 * 3 - 4) / (-5.6e7 + nan)
# NaN never equals anything. These tests should print "no". print "nan == nan?", (nan == nan) ? "yes" : "no" print "nan == 42?", (nan == 42) ? "yes" : "no" }</lang>
- Output:
from nawk version 2010
$ awk -f extreme.awk nzero = -0 nan = nan pinf = inf ninf = -inf atan2(0, 0) = 0 atan2(0, pinf) = 0 atan2(0, nzero) = 3.14159 atan2(0, ninf) = 3.14159 nan test: nan nan == nan? yes nan == 42? yes
The last two lines are wrong. IEEE says that NaN != NaN (and also NaN != 42). The problem is that Awk assumes a == b unless (a - b) < 0 or (a - b) > 0; but NaN - NaN (or NaN - 42) is NaN, and NaN < 0 is false, and NaN > 0 is false, so Awk supposes that NaN == NaN (or NaN == 42) is true.
- Output:
from gawk version 3.1.7
nzero = 0 nan = NaN pinf = Inf ninf = NaN atan2(0, 0) = 0 atan2(0, pinf) = 0 atan2(0, nzero) = 0 atan2(0, ninf) = 3.14159 ninf * -1 = Inf pinf * -1 = NaN -1e200 > ninf? yes 1e200 < pinf? yes nan test: NaN nan == nan? no nan == 42? no
The attempts to use negative zero have failed. GNU awk uses both integers and floating point; GNU awk converted negative zero to an integer and lost the negative sign.
NaN works. Negative infinity seems to work, except when printing. Whenever GNU awk tries to print negative infinity, it prints "NaN".
bc
bc numbers are very different from IEEE floating-point numbers. bc numbers have a variable number of digits. They can always have more digits (until bc has no memory, runs too slow or crashes), so there is no overflow, and no way to reach infinity.
bc also has no negative zero, and no NaN.
$ bc # trying for negative zero -0 0 # trying to underflow to negative zero -1 / 2 0 # trying for NaN (not a number) 0 / 0 dc: divide by zero 0 sqrt(-1) dc: square root of negative number dc: stack empty dc: stack empty
C
<lang C>#include <stdio.h>
int main() {
double inf = 1/0.0; double minus_inf = -1/0.0; double minus_zero = -1/ inf ; double nan = 0.0/0.0;
printf("positive infinity: %f\n",inf); printf("negative infinity: %f\n",minus_inf); printf("negative zero: %f\n",minus_zero); printf("not a number: %f\n",nan);
/* some arithmetic */
printf("+inf + 2.0 = %f\n",inf + 2.0); printf("+inf - 10.1 = %f\n",inf - 10.1); printf("+inf + -inf = %f\n",inf + minus_inf); printf("0.0 * +inf = %f\n",0.0 * inf); printf("1.0/-0.0 = %f\n",1.0/minus_zero); printf("NaN + 1.0 = %f\n",nan + 1.0); printf("NaN + NaN = %f\n",nan + nan);
/* some comparisons */
printf("NaN == NaN = %s\n",nan == nan ? "true" : "false"); printf("0.0 == -0.0 = %s\n",0.0 == minus_zero ? "true" : "false");
return 0;
}</lang>
- Output:
positive infinity: inf negative infinity: -inf negative zero: -0.000000 not a number: -nan +inf + 2.0 = inf +inf - 10.1 = inf +inf + -inf = -nan 0.0 * +inf = -nan 1.0/-0.0 = -inf NaN + 1.0 = -nan NaN + NaN = -nan NaN == NaN = false 0.0 == -0.0 = true
- Output:
using MinGW with gcc 4.5.2 on Windows 7
positive infinity: 1.#INF00 negative infinity: -1.#INF00 negative zero: -0.000000 not a number: -1.#IND00 +inf + 2.0 = 1.#INF00 +inf - 10.1 = 1.#INF00 +inf + -inf = -1.#IND00 0.0 * +inf = -1.#IND00 1.0/-0.0 = -1.#INF00 NaN + 1.0 = -1.#IND00 NaN + NaN = -1.#IND00 NaN == NaN = false 0.0 == -0.0 = true
- Output:
using icpc version 12.1.4 (gcc version 4.6.0 compatibility) on Ubuntu 12.04 (64 bit)
positive infinity: inf negative infinity: -inf negative zero: -0.000000 not a number: -nan +inf + 2.0 = inf +inf - 10.1 = inf +inf + -inf = -nan 0.0 * +inf = 0.000000 1.0/-0.0 = -inf NaN + 1.0 = -nan NaN + NaN = -nan NaN == NaN = false 0.0 == -0.0 = true
Some values may be directly defined in various headers. Following code also shows some of those values' bit patterns (most significant bit first for each byte). It should be pretty portable. <lang c>#include <stdio.h>
- include <values.h>
- include <math.h>
char * bits(double v) { static char s[sizeof(double) * (CHARBITS + 1)]; int n, i, j; unsigned char *c = (void*)&v; for (i = n = 0; i < sizeof(double); i++) { for (j = 1 << (CHARBITS - 1); j; j >>= 1) s[n++] = (c[i] & j) ? '1' : '.'; s[n++] = ' '; } s[n-1] = 0; return s; }
int main(void) { double x[] = { 1.0, -1.0, 1.0/256, 0.0, // "normal" values -0.0, INFINITY, -INFINITY, NAN, -NAN, // special DBL_MAX, DBL_MIN // not required by task }; int i;
for (i = 0; i < sizeof(x) / sizeof(x[0]); i++) printf("%s | %g\n", bits(x[i]), x[i]);
return 0; }</lang>
Clojure
<lang clojure> (def neg-inf (/ -1.0 0.0)) ; Also Double/NEGATIVE_INFINITY (def inf (/ 1.0 0.0)) ; Also Double/POSITIVE_INFINITY (def nan (/ 0.0 0.0)) ; Also Double/NaN (def neg-zero (/ -2.0 Double/POSITIVE_INFINITY)) ; Also -0.0 (println " Negative inf: " neg-inf) (println " Positive inf: " inf) (println " NaN: " nan) (println " Negative 0: " neg-zero) (println " inf + -inf: " (+ inf neg-inf)) (println " NaN == NaN: " (= Double/NaN Double/NaN)) (println "NaN equals NaN: " (.equals Double/NaN Double/NaN)) </lang>
- Output:
Negative inf: -Infinity Positive inf: Infinity NaN: NaN Negative 0: -0.0 inf + -inf: NaN NaN == NaN: false NaN equals NaN: true
D
D V.2 has a pretty comprehensive approach to floating point values, and unlike Ada embraces IEEE 754. This program shows only part of the floating point features supported by D and its Phobos standard library. <lang d>// Compile this module without -O
import std.stdio: writeln, writefln; import std.string: format; import std.math: NaN, getNaNPayload;
void show(T)() {
static string toHex(T x) { string result; auto ptr = cast(ubyte*)&x; foreach_reverse (immutable i; 0 .. T.sizeof) result ~= format("%02x", ptr[i]); return result; }
enum string name = T.stringof; writeln("Computed extreme ", name, " values:");
T zero = 0.0; T pos_inf = T(1.0) / zero; writeln(" ", name, " +oo = ", pos_inf);
T neg_inf = -pos_inf; writeln(" ", name, " -oo = ", neg_inf);
T pos_zero = T(1.0) / pos_inf; writeln(" ", name, " +0 (pos_zero) = ", pos_zero);
T neg_zero = T(1.0) / neg_inf; writeln(" ", name, " -0 = ", neg_zero);
T nan = zero / pos_zero; writefln(" " ~ name ~ " zero / pos_zero = %f %s", nan, toHex(nan)); writeln();
writeln("Some ", T.stringof, " properties and literals:"); writeln(" ", name, " +oo = ", T.infinity); writeln(" ", name, " -oo = ", -T.infinity); writeln(" ", name, " +0 = ", T(0.0)); writeln(" ", name, " -0 = ", T(-0.0)); writefln(" " ~ name ~ " nan = %f %s", T.nan, toHex(T.nan)); writefln(" " ~ name ~ " init = %f %s", T.init, toHex(T.init)); writeln(" ", name, " epsilon = ", T.epsilon); writeln(" ", name, " max = ", T.max); writeln(" ", name, " -max = ", -T.max); writeln(" ", name, " min_normal = ", -T.min_normal); writeln("-----------------------------");
}
void main() {
show!float; show!double; show!real;
writeln("Largest possible payload for float, double and real NaNs:"); immutable float f1 = NaN(0x3F_FFFF); writeln(getNaNPayload(f1));
immutable double f2 = NaN(0x3_FFFF_FFFF_FFFF); writeln(getNaNPayload(f2));
immutable real f3 = NaN(0x3FFF_FFFF_FFFF_FFFF); writeln(getNaNPayload(f3));
}</lang>
- Output:
Computed extreme float values: float +oo = inf float -oo = -inf float +0 = 0 float -0 = -0 float init = -nan ffc00000 Some float properties and literals: float +oo = inf float -oo = -inf float +0 = 0 float -0 = -0 float nan = nan 7fc00000 float init = nan 7fa00000 float epsilon = 1.19209e-07 float max = 3.40282e+38 float -max = -3.40282e+38 float min_normal = -1.17549e-38 ----------------------------- Computed extreme double values: double +oo = inf double -oo = -inf double +0 = 0 double -0 = -0 double init = -nan fff8000000000000 Some double properties and literals: double +oo = inf double -oo = -inf double +0 = 0 double -0 = -0 double nan = nan 7ff8000000000000 double init = nan 7ff4000000000000 double epsilon = 2.22045e-16 double max = 1.79769e+308 double -max = -1.79769e+308 double min_normal = -2.22507e-308 ----------------------------- Computed extreme real values: real +oo = inf real -oo = -inf real +0 = 0 real -0 = -0 real init = -nan ffffc000000000000000 Some real properties and literals: real +oo = inf real -oo = -inf real +0 = 0 real -0 = -0 real nan = nan 7fffc000000000000000 real init = nan 7fffa000000000000000 real epsilon = 1.0842e-19 real max = 1.18973e+4932 real -max = -1.18973e+4932 real min_normal = -3.3621e-4932 ----------------------------- Largest possible payload for float, double and real NaNs: 4194303 1125899906842623 4610560118520545279
If you compile it with -O you get results like:
Computed extreme float values: float +oo = 2.9411e-36 float -oo = -2.9411e-36 float +0 (pos_zero) = 3.40008e+35 float -0 = -3.40008e+35 float zero / pos_zero = 0.000000 00000000 Some float properties and literals: float +oo = inf float -oo = -inf float +0 = 0 float -0 = -0 float nan = nan 7fc00000 float init = nan 7fa00000 float epsilon = 1.19209e-07 float max = 3.40282e+38 float -max = -3.40282e+38 float min_normal = -1.17549e-38 ----------------------------- Computed extreme double values: double +oo = 2.04581e-275 double -oo = -2.04581e-275 double +0 (pos_zero) = 4.88804e+274 double -0 = -4.88804e+274 double zero / pos_zero = 0.000000 0000000000000000 Some double properties and literals: double +oo = inf double -oo = -inf double +0 = 0 double -0 = -0 double nan = nan 7ff8000000000000 double init = nan 7ff4000000000000 double epsilon = 2.22045e-16 double max = 1.79769e+308 double -max = -1.79769e+308 double min_normal = -2.22507e-308 ----------------------------- Computed extreme real values: real +oo = 1.81242e-4933 real -oo = -1.81242e-4933 real +0 (pos_zero) = inf real -0 = -inf real zero / pos_zero = 0.000000 00000000000000000000 Some real properties and literals: real +oo = inf real -oo = -inf real +0 = 0 real -0 = -0 real nan = nan 7fffc000000000000000 real init = nan 7fffa000000000000000 real epsilon = 1.0842e-19 real max = 1.18973e+4932 real -max = -1.18973e+4932 real min_normal = -3.3621e-4932 ----------------------------- Largest possible payload for float, double and real NaNs: 4194303 1125899906842623 4610560118520545279
Among other things, it is possible to trap FP hardware exceptions: <lang d>import std.math: FloatingPointControl;
void main() {
// Enable hardware exceptions for division by zero, overflow // to infinity, invalid operations, and uninitialized // floating-point variables. FloatingPointControl fpc; fpc.enableExceptions(FloatingPointControl.severeExceptions);
double f0 = 0.0; double y1 = f0 / f0; // generates hardware exception // unless it's compiled with -O)
}</lang>
- Output:
object.Error: Invalid Floating Point Operation
Delphi
Tested on Delphi 2009:
<lang Delphi>program Floats;
{$APPTYPE CONSOLE}
uses
SysUtils;
var
PlusInf, MinusInf, NegZero, NotANum: Double;
begin
PlusInf:= 1.0/0.0; MinusInf:= -1.0/0.0; NegZero:= -1.0/PlusInf; NotANum:= 0.0/0.0;
Writeln('Positive Infinity: ', PlusInf); // +Inf Writeln('Negative Infinity: ', MinusInf); // -Inf Writeln('Negative Zero: ', NegZero); // -0.0 Writeln('Not a Number: ', NotANum); // Nan
// allowed arithmetic
Writeln('+Inf + 2.0 = ', PlusInf + 2.0); // +Inf Writeln('+Inf - 10.1 = ', PlusInf - 10.1); // +Inf Writeln('NaN + 1.0 = ', NotANum + 1.0); // Nan Writeln('NaN + NaN = ', NotANum + NotANum); // Nan
// throws exception
try Writeln('+inf + -inf = ', PlusInf + MinusInf); // EInvalidOp Writeln('0.0 * +inf = ', 0.0 * PlusInf); // EInlalidOp Writeln('1.0/-0.0 = ', 1.0 / NegZero); // EZeroDivide except on E:Exception do Writeln(E.Classname, ': ', E.Message); end;
Readln;
end.</lang>
Eiffel
<lang Eiffel> class APPLICATION inherit ARGUMENTS create make
feature {NONE} -- Initialization
make -- Run application. local negInf, posInf, negZero, nan: REAL_64 do negInf := -1. / 0. -- also {REAL_64}.negative_infinity posInf := 1. / 0. -- also {REAL_64}.positive_infinity negZero := -1. / posInf nan := 0. / 0. -- also {REAL_64}.nan
print("Negative Infinity: ") print(negInf) print("%N") print("Positive Infinity: ") print(posInf) print("%N") print("Negative Zero: ") print(negZero) print("%N") print("NaN: ") print(nan) print("%N%N")
print("1.0 + Infinity = ") print((1.0 + posInf)) print("%N") print("1.0 - Infinity = ") print((1.0 - posInf)) print("%N") print("-Infinity + Infinity = ") print((negInf + posInf)) print("%N") print("-0.0 * Infinity = ") print((negZero * posInf)) print("%N") print("NaN + NaN = ") print((nan + nan)) print("%N") print("(NaN = NaN) = ") print((nan = nan)) print("%N") print("(0.0 = -0.0) = ") print((0.0 = negZero)) print("%N") end end</lang>
- Output:
Negative Infinity: -Infinity Positive Infinity: Infinity Negative Zero: -0 NaN: NaN 1.0 + Infinity = Infinity 1.0 - Infinity = -Infinity -Infinity + Infinity = NaN -0.0 * Infinity = NaN NaN + NaN = NaN (NaN = NaN) = False (0.0 = -0.0) = True
Euphoria
<lang Euphoria>constant inf = 1E400 constant minus_inf = -inf constant nan = 0*inf
printf(1,"positive infinity: %f\n", inf) printf(1,"negative infinity: %f\n", minus_inf) printf(1,"not a number: %f\n", nan)
-- some arithmetic
printf(1,"+inf + 2.0 = %f\n", inf + 2.0) printf(1,"+inf - 10.1 = %f\n", inf - 10.1) printf(1,"+inf + -inf = %f\n", inf + minus_inf) printf(1,"0.0 * +inf = %f\n", 0.0 * inf) printf(1,"NaN + 1.0 = %f\n", nan + 1.0) printf(1,"NaN + NaN = %f\n", nan + nan)</lang>
- Output:
positive infinity: inf negative infinity: -inf not a number: -nan +inf + 2.0 = inf +inf - 10.1 = inf +inf + -inf = -nan 0.0 * +inf = -nan NaN + 1.0 = -nan NaN + NaN = -nan
Forth
<lang forth> 1e 0e f/ f. \ inf -1e 0e f/ f. \ inf (output bug: should say "-inf") -1e 0e f/ f0< . \ -1 (true, it is -inf)
0e 0e f/ f. \ nan
-1e 0e f/ 1/f f0< . \ 0 (false, can't represent IEEE negative zero)</lang>
Go
<lang go>package main
import (
"fmt" "math"
)
func main() {
// compute "extreme values" from non-extreme values var zero float64 // zero is handy. var negZero, posInf, negInf, nan float64 // values to compute. negZero = zero * -1 posInf = 1 / zero negInf = -1 / zero nan = zero / zero
// print extreme values stored in variables fmt.Println(negZero, posInf, negInf, nan)
// directly obtain extreme values fmt.Println(math.Float64frombits(1<<63), math.Inf(1), math.Inf(-1), math.NaN())
// validate some arithmetic on extreme values fmt.Println() validateNaN(negInf+posInf, "-Inf + Inf") validateNaN(0*posInf, "0 * Inf") validateNaN(posInf/posInf, "Inf / Inf") // mod is specifically named in "What every computer scientist..." // Go math package doc lists many special cases for other package functions. validateNaN(math.Mod(posInf, 1), "Inf % 1") validateNaN(1+nan, "1 + NaN") validateZero(1/posInf, "1 / Inf") validateGT(posInf, math.MaxFloat64, "Inf > max value") validateGT(-math.MaxFloat64, negInf, "-Inf < max neg value") validateNE(nan, nan, "NaN != NaN") validateEQ(negZero, 0, "-0 == 0")
}
func validateNaN(n float64, op string) {
if math.IsNaN(n) { fmt.Println(op, "-> NaN") } else { fmt.Println("!!! Expected NaN from", op, " Found", n) }
}
func validateZero(n float64, op string) {
if n == 0 { fmt.Println(op, "-> 0") } else { fmt.Println("!!! Expected 0 from", op, " Found", n) }
}
func validateGT(a, b float64, op string) {
if a > b { fmt.Println(op) } else { fmt.Println("!!! Expected", op, " Found not true.") }
}
func validateNE(a, b float64, op string) {
if a == b { fmt.Println("!!! Expected", op, " Found not true.") } else { fmt.Println(op) }
}
func validateEQ(a, b float64, op string) {
if a == b { fmt.Println(op) } else { fmt.Println("!!! Expected", op, " Found not true.") }
}</lang>
- Output:
-0 +Inf -Inf NaN -0 +Inf -Inf NaN -Inf + Inf -> NaN 0 * Inf -> NaN Inf / Inf -> NaN Inf % 1 -> NaN 1 + NaN -> NaN 1 / Inf -> 0 Inf > max value -Inf < max neg value NaN != NaN -0 == 0
Groovy
Solution: <lang groovy>def negInf = -1.0d / 0.0d; //also Double.NEGATIVE_INFINITY def inf = 1.0d / 0.0d; //also Double.POSITIVE_INFINITY def nan = 0.0d / 0.0d; //also Double.NaN def negZero = -2.0d / inf;
println(" Negative inf: " + negInf); println(" Positive inf: " + inf); println(" NaN: " + nan); println(" Negative 0: " + negZero); println(" inf + -inf: " + (inf + negInf)); println(" 0 * NaN: " + (0 * nan)); println(" NaN == NaN: " + (nan == nan)); println("NaN equals NaN: " + (nan.equals(nan)));</lang>
- Output:
Negative inf: -Infinity Positive inf: Infinity NaN: NaN Negative 0: -0.0 inf + -inf: NaN 0 * NaN: NaN NaN == NaN: true NaN equals NaN: true
Note that the Groovy implementation of 'equals' incorrectly allows that "NaN == NaN" is true. In a correct IEEE implementation NaN is never equal to anything, including itself.
Icon and Unicon
Icon and Unicon don't define minimum or maximum values of reals, or a negative 0.0. Real numbers are implemented as C doubles and the behavior could vary somewhat from platform to platform. Both explicitly check for divide by zero and treat it as a runtime error (201), so it's not clear how you could produce one of these with the possible exception of the value being introduced through externally called code.
J
Extreme values <lang j> Inf=: _
NegInf=: __ NB. Negative zero cannot be represented in J. NaN=. _.</lang>
The numeric atom _.
(Indeterminate) is provided as a means for dealing with NaN in data from sources outside J.
J itself generates NaN errors rather than NaN values and recommends that _.
be removed from data as soon as possible because, by definition, they will produce inconsistent results in contexts where value is important.
Extreme values from expressions <lang j> (1 % 0) , (_1 % 0) _ __
(1e234 * 1e234) , (_1e234 * 1e234)
_ __
_ + __ NB. generates NaN error, rather than NaN
|NaN error | _ +__
_ - _ NB. generates NaN error, rather than NaN
|NaN error | _ -_
%_
0
%__ NB. Under the covers, the reciprocal of NegInf produces NegZero, but this fact isn't exposed to the user, who just sees zero
0 </lang>
Some arithmetic <lang j> _ + _ _
__ + __
__
Inf + 0
_
NegInf * 0
0</lang>
Java
<lang java>public class Extreme {
public static void main(String[] args) { double negInf = -1.0 / 0.0; //also Double.NEGATIVE_INFINITY double inf = 1.0 / 0.0; //also Double.POSITIVE_INFINITY double nan = 0.0 / 0.0; //also Double.NaN double negZero = -2.0 / inf;
System.out.println("Negative inf: " + negInf); System.out.println("Positive inf: " + inf); System.out.println("NaN: " + nan); System.out.println("Negative 0: " + negZero); System.out.println("inf + -inf: " + (inf + negInf)); System.out.println("0 * NaN: " + (0 * nan)); System.out.println("NaN == NaN: " + (nan == nan)); }
}</lang>
- Output:
Negative inf: -Infinity Positive inf: Infinity NaN: NaN Negative 0: -0.0 inf + -inf: NaN 0 * NaN: NaN NaN == NaN: false
jq
jq uses IEEE 754 64-bit numbers, and certain numeric expressions yield the exceptional floating point values in the usual way. However, since JSON does not support such values, jq currently prints the NaN value as null, and the infinite value as a very large float, so some care is required in interpreting the printed values.
For example, here are two expressions and the result of displaying their values: <lang jq>0/0 #=> null 1e1000 #=> 1.7976931348623157e+308</lang>
If your jq does not already have `infinite` and `nan` defined as built-in functions, they can be defined as follows:
<lang jq>def infinite: 1e1000; def nan: 0/0;</lang>
Here are some further expressions with their results:
<lang jq>-0 #=> -0 0 == -0 # => true infinite == infinite #=> true infinite == -(-infinite) #=> true (infinite + infinite) == infinite #=> true 1/infinite #=> 0
nan == nan #=> false # N.B.</lang>
Since `==` cannot be used to check if a value is IEEE NaN, jq 1.5 provides the builtin function `isnan` for doing so: <lang jq>nan | isnan #=> true infinite | isnan #=> false</lang>
Exceptional values can be assigned to jq variables in the usual way: <lang jq>infinite as $inf | 1 / $inf #=> 0 -0 as $z | $z #=> -0</lang>
Mathematica
<lang mathematica>Column@{ReleaseHold[
Function[expression, Row@{HoldForm@InputForm@expression, " = ", Quiet@expression}, HoldAll] /@ Hold[1./0., 0./0., Limit[-Log[x], x -> 0], Limit[Log[x], x -> 0], Infinity + 1, Infinity + Infinity, 2 Infinity, Infinity - Infinity, 0 Infinity, ComplexInfinity + 1, ComplexInfinity + ComplexInfinity, 2 ComplexInfinity, 0 ComplexInfinity, Indeterminate + 1, 0 Indeterminate]]}</lang>
- Output:
1./0. = ComplexInfinity 0./0. = Indeterminate Limit[-Log[x], x -> 0] = ∞ Limit[Log[x], x -> 0] = -∞ Infinity + 1 = ∞ Infinity + Infinity = ∞ 2*Infinity = ∞ Infinity - Infinity = Indeterminate 0*Infinity = Indeterminate ComplexInfinity + 1 = ComplexInfinity ComplexInfinity + ComplexInfinity = Indeterminate 2*ComplexInfinity = ComplexInfinity 0*ComplexInfinity = Indeterminate Indeterminate + 1 = Indeterminate 0*Indeterminate = Indeterminate
Maxima
With ordinary floating point numbers, 1.0 / 0.0
, 0.0 / 0.0
or 1e300^2
all throw an exception.
However, Maxima has big floats and knows how to manage the inf
, minf
and infinity
symbols
(resp. positive, negative and complex infinity), with the function limit
. It also has zeroa
and zerob
for positive and negative infinitesimal (though their usage is quite obscure),
and und
for undefined value.
MUMPS
ANSI MUMPS
The 1995 Standard MUMPS (X11.1–1995) implementations do not deal with floating point numbers following IEEE 754. Attempting to use a number over the precision of the system results in a <MAXNUMBER> error:
USER>write 3e145 30000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 USER>write 3e146 <MAXNUMBER>
Intersystems Caché
Caché has the function $DOUBLE which complies with the IEEE 754 standard. The negative zero is indistinguishable from positive zero by operations. The special values evaluate to 0 when converted to a number in a later operation. <lang MUMPS> EXTREMES
NEW INF,NINF,ZERO,NOTNUM,NEGZERO SET INF=$DOUBLE(3.0E310),NINF=$DOUBLE(-3.0E310),ZERO=$DOUBLE(0),NOTNUM=$DOUBLE(INF-INF),NEGZERO=$DOUBLE(ZERO*-1) WRITE "Infinity: ",INF,! WRITE "Infinity ",$SELECT($ISVALIDNUM(INF):"is a number",1:"is not a number"),! WRITE "Negative Infinity: ",NINF,! WRITE "Negative Infinity ",$SELECT($ISVALIDNUM(NINF):"is a number",1:"is not a number"),! WRITE "Zero: ",ZERO,! WRITE "Zero ",$SELECT($ISVALIDNUM(ZERO):"is a number",1:"is not a number"),! WRITE "Negative Zero: ",NEGZERO,! WRITE "Negative Zero ",$SELECT($ISVALIDNUM(NEGZERO):"is a number",1:"is not a number"),! WRITE "Not a Number: ",NOTNUM,! WRITE "Not a Number ",$SELECT($ISVALIDNUM(NOTNUM):"is a number",1:"is not a number"),! KILL INF,NINF,ZERO,NONNUM,NEGZERO QUIT
</lang>
- Output:
USER>d EXTREMES^ROSETTA Infinity: INF Infinity is not a number Negative Infinity: -INF Negative Infinity is not a number Zero: 0 Zero is a number Negative Zero: 0 Negative Zero is a number Not a Number: NAN Not a Number is not a number
NetRexx
While NetRexx native support for numbers allows for very large decimal precision, the Java primitives (int, long, float, double etc.), can use the constants and methods provided for "extreme" values:
<lang NetRexx>/* NetRexx */ options replace format comments java crossref symbols binary
negInf = double -1.0 / 0.0; knegInf = Double.NEGATIVE_INFINITY inf = double 1.0 / 0.0; kinf = Double.POSITIVE_INFINITY nan = double 0.0 / 0.0; knan = Double.NaN negZero = double -2.0 / inf; knegZero = -2.0 / Double.POSITIVE_INFINITY
say "Negative inf: " Rexx(negInf).right(10) '|' knegInf say "Positive inf: " Rexx(inf).right(10) '|' kinf say "NaN: " Rexx(nan).right(10) '|' knan say "Negative 0: " Rexx(negZero).right(10) '|' knegZero say "inf + -inf: " Rexx(inf + negInf).right(10) '|' (kinf + knegInf) say "0 * NaN: " Rexx(0 * nan).right(10) '|' (0 * knan) say "NaN == NaN: " Rexx(nan == nan).right(10) '|' (knan == knan)
return </lang>
- Output:
Negative inf: Infinity | Infinity Positive inf: Infinity | Infinity NaN: NaN | NaN Negative 0: 0 | 0 inf + -inf: NaN | NaN 0 * NaN: NaN | NaN NaN == NaN: 0 | 0
Nim
<lang nim>echo 1e234 * 1e234 # inf echo 1e234 * -1e234 # -inf echo 1 / inf # 0 echo inf + -inf # -nan echo nan # nan
echo nan == nan # false echo 0.0 == -0.0 # true echo 0.0 * nan # nan echo nan * 0.0 # nan echo 0.0 * inf # -nan echo inf * 0.0 # -nan</lang>
OCaml
<lang ocaml># infinity;; - : float = infinity
- neg_infinity;;
- : float = neg_infinity
- nan;;
- : float = nan
- -0.;;
- : float = -0.
- -. 0.;;
- : float = -0.
- 1. /. 0.;;
- : float = infinity
- -1. /. 0.;;
- : float = neg_infinity
- -. infinity;;
- : float = neg_infinity
- infinity +. neg_infinity;;
- : float = nan
- 0. /. 0.;;
- : float = nan
- infinity /. infinity;;
- : float = nan
- nan = nan;;
- : bool = false
- nan == nan;;
- : bool = true
- 0. *. infinity;;
- : float = nan
- 0. = -0.;;
- : bool = true
- 0. == -0.;;
- : bool = false</lang>
Oforth
In Oforth, the only 'extreme' floating point values are PInfinity (+oo) and NInfinity (-oo).
- Output:
>10.0 1000.0 powf PInfinity == println 1 ok >10.0 1000.0 powf neg NInfinity == println 1 ok
Oz
<lang oz>declare Inf = 1.0e234 * 1.0e234 MinusInf = 1.0e234 * ~1.0e234 Zero = 1.0 / Inf MinusZero = 1.0 / MinusInf NaN = 0.0 / 0.0
{System.showInfo "infinite: "#Inf} {System.showInfo "-infinite: "#MinusInf} {System.showInfo "0: "#Zero} {System.showInfo "-0: "#MinusZero} %% seems to be identical to Zero {System.showInfo "NaN: "#NaN}
{System.showInfo "inf + -inf: "#Inf+MinusInf} {System.showInfo "NaN * 0: "#NaN*0.0} {System.showInfo "0 * NaN: "#0.0*NaN} {System.showInfo "inf * 0: "#Inf*0.0} {System.showInfo "0 * inf: "#0.0*Inf}
{Show NaN == NaN} %% shows 'true' ! {Show Zero == MinusZero}
{Show 1.0/0.0 == Inf} %% true {Show 1.0/~0.0 == MinusInf} %% true</lang>
- Output:
<lang oz>infinite: 1.#INF -infinite: -1.#INF 0: 0.0 -0: 0.0 NaN: -1.#IND inf + -inf: -1.#IND NaN * 0: -1.#IND 0 * NaN: -1.#IND inf * 0: -1.#IND 0 * inf: -1.#IND true true true true</lang>
PARI/GP
PARI t_REALs are not IEEE floating-point numbers; in particular they cannot store NaN or infinite values. (The latter have their own type, t_INFINITY, with values +oo
and -oo
.)
PARI t_REAL numbers have a maximum value of
32-bit | 161,614,249 decimal digits | |
---|---|---|
64-bit | 694,127,911,065,419,642 decimal digits |
where is the machine epsilon at the selected precision. The minimum value is the opposite of the maximum value (reverse the sign bit).
Pascal
See Delphi
Perl
Perl numbers have three formats (integer, floating-point, string) and perlnumber explains the automatic conversions. Arithmetic tends to convert numbers to integers.
To get negative zero, one must negate a floating-point zero, not an integer zero.
So -0 is "0", -0.0 is "-0", but -(1.0 - 1.0) is again "0" because the result of 1.0 - 1.0 is an integer zero.
Stringification of minus zero may or may not keep the sign in the string, depending on the platform and Perl version.
If the sign is important, use printf "%f"
instead ("%g"
won't work: it gives "0").
Division by zero, sqrt(-1) and log(0) are fatal errors. To get infinity and NaN, use corresponding string and force a numeric conversion by adding zero to it, or prepending a "+" or "-": <lang perl>#!/usr/bin/perl use strict; use warnings;
my $nzero = -0.0; my $nan = 0 + "nan"; my $pinf = +"inf"; my $ninf = -"inf";
printf "\$nzero = %.1f\n", $nzero; print "\$nan = $nan\n"; print "\$pinf = $pinf\n"; print "\$ninf = $ninf\n\n";
printf "atan2(0, 0) = %g\n", atan2(0, 0); printf "atan2(0, \$nzero) = %g\n", atan2(0, $nzero); printf "sin(\$pinf) = %g\n", sin($pinf); printf "\$pinf / -1 = %g\n", $pinf / -1; printf "\$ninf + 1e100 = %g\n\n", $ninf + 1e100;
printf "nan test: %g\n", (1 + 2 * 3 - 4) / (-5.6e7 * $nan); printf "nan == nan? %s\n", ($nan == $nan) ? "yes" : "no"; printf "nan == 42? %s\n", ($nan == 42) ? "yes" : "no";</lang>
- Output:
$nzero = -0.0 $nan = nan $pinf = inf $ninf = -inf atan2(0, 0) = 0 atan2(0, $nzero) = 3.14159 sin($pinf) = nan $pinf / -1 = -inf $ninf + 1e100 = -inf nan test: nan nan == nan? no nan == 42? no
Here is a rare example of NaN and infinity for an integer type. Math::BigInt, a module that comes with Perl, provides integers of arbitrary sizes, but also has NaN, positive infinity, and negative infinity. There is no negative zero.
<lang perl>#!/usr/bin/perl use strict; use warnings;
use Math::BigInt;
my $nan = Math::BigInt->bnan(); my $pinf = Math::BigInt->binf(); my $ninf = Math::BigInt->binf('-');
print "\$nan = $nan\n"; print "\$pinf = $pinf\n"; print "\$ninf = $ninf\n\n";
my $huge = Math::BigInt->new("123456789"); $huge->bmul($huge)->bmul($huge)->bmul($huge);
print "\$huge = $huge\n"; printf "\$ninf + \$huge = %s\n", $ninf->copy()->badd($huge); printf "\$pinf - \$huge = %s\n", $pinf->copy()->bsub($huge); printf "\$nan * \$huge = %s\n", $nan->copy()->bmul($huge); printf "\$nan == \$nan? %s\n", defined($nan->bcmp($nan)) ? "maybe" : "no"; printf "\$nan == \$huge? %s\n", defined($nan->bcmp($huge)) ? "maybe" : "no";</lang>
- Output:
$nan = NaN $pinf = inf $ninf = -inf $huge = 53965948844821664748141453212125737955899777414752273389058576481 $ninf + $huge = -inf $pinf - $huge = inf $nan * $huge = NaN $nan == $nan? no $nan == $huge? no
Perl 6
<lang Perl6>print qq:to 'END' positive infinity: {Inf} negative infinity: {-Inf} negative zero: {-0e0} not a number: {NaN} +Inf + 2.0 = {Inf + 2} +Inf - 10.1 = {Inf - 10.1} +Inf + -Inf = {Inf + -Inf} 0 * +Inf = {0 * Inf} NaN + 1.0 = {NaN + 1.0} NaN + NaN = {NaN + NaN} NaN == NaN = {NaN == NaN} 0.0 == -0.0 = {0e0 == -0e0} END</lang>
0e0
is used to have floating point number.
Simply using 0.0
makes rational number that doesn't recognize -0
.
qq:to
is heredoc syntax, where qq
means
that variables and closures (between braces) are interpolated.
- Output:
positive infinity: Inf negative infinity: -Inf negative zero: -0 not a number: NaN +Inf + 2.0 = Inf +Inf - 10.1 = Inf +Inf + -Inf = NaN 0 * +Inf = NaN NaN + 1.0 = NaN NaN + NaN = NaN NaN == NaN = False 0.0 == -0.0 = True
Phix
<lang Phix>constant inf = 1e300*1e300, -- (works on both 32 and 64 bit)
ninf = -inf, nan = -(inf/inf), nzero = -1/inf -- (not supported)
printf(1," inf: %f\n",{inf}) printf(1," ninf: %f\n",{ninf}) printf(1," nan: %f\n",{nan}) printf(1,"*nzero: %f\n",{nzero}) printf(1," inf+2: %f\n",{inf+2}) printf(1," inf+ninf: %f\n",{inf+ninf}) printf(1," 0*inf: %f\n",{0*inf}) printf(1," nan+1: %f\n",{nan+1}) printf(1," nan+nan: %f\n",{nan+nan}) printf(1," inf>1e300: %d\n",{inf>1e300}) printf(1," ninf<1e300: %d\n",{ninf<-1e300}) printf(1,"*nan=nan: %d\n",{nan=nan}) printf(1," nan=42: %d\n",{nan=42}) printf(1,"*nan<0: %d\n",{nan<0}) printf(1," nan>0: %d\n",{nan>0})</lang>
- Output:
inf: inf ninf: -inf nan: nan *nzero: 0.000000 inf+2: inf inf+ninf: -nan 0*inf: -nan nan+1: nan nan+nan: nan inf>1e300: 1 ninf<1e300: 1 *nan=nan: 1 nan=42: 0 *nan<0: 1 nan>0: 0
The * lines are wrong. negative zero is not supported, and might not be practical. nan=nan should be false (0), as should nan<0. division by 0 is a fatal error.
If you fancy having a go at getting nan to work properly (x86 assembly required), see builtins\VM\pJcc.e (search for nan, 4 places, marked with --DEV this may be the wrong thing to do entirely) and also (if you succeed) test\t41infan.exw will need a few corrections.
If you fancy having a go at negative zero support (ditto), your first stop should be :%pStoreFlt in builtins\VM\pHeap.e and use whatever the test is for -0.0 there. I would be happiest if apps that needed support of -0.0 had to explicitly call something in pHeap.e to set a flag to enable any new code.
PicoLisp
PicoLisp has only very limited built-in floating point support, and handles the rest by calling native (typically C) libraries. Minus zero and negative infinity cannot be represented, while NaN is represented by NIL <lang PicoLisp>(load "@lib/math.l")
- (exp 1000.0) # Too large for IEEE floats
-> T
- (+ 1 2 NIL 3) # NaN propagates
-> NIL</lang>
PureBasic
<lang PureBasic>Define.f If OpenConsole()
inf = 1/None minus_inf = -1/None minus_zero = -1/inf nan = None/None PrintN("positive infinity: "+StrF(inf)) PrintN("negative infinity: "+StrF(minus_inf)) PrintN("positive zero: "+StrF(None)) PrintN("negative zero: "+StrF(minus_zero)) ; handles as 0.0 PrintN("not a number: "+StrF(nan)) PrintN("Arithmetics") PrintN("+inf + 2.0 = "+StrF(inf + 2.0)) PrintN("+inf - 10.1 = "+StrF(inf - 10.1)) PrintN("+inf + -inf = "+StrF(inf + minus_inf)) PrintN("0.0 * +inf = "+StrF(0.0 * inf)) PrintN("1.0/-0.0 = "+StrF(1.0/minus_zero)) PrintN("NaN + 1.0 = "+StrF(nan + 1.0)) PrintN("NaN + NaN = "+StrF(nan + nan)) PrintN("Logics") If IsInfinity(inf): PrintN("Variabel 'Infinity' is infinite"): EndIf If IsNAN(nan): PrintN("Variable 'nan' is not a number"): EndIf Print(#CRLF$+"Press ENTER to EXIT"): Input()
EndIf</lang>
positive infinity: +Infinity negative infinity: -Infinity positive zero: 0.0000000000 negative zero: 0.0000000000 not a number: -1.#IND000000 Arithmetics +inf + 2.0 = +Infinity +inf - 10.1 = +Infinity +inf + -inf = -1.#IND000000 0.0 * +inf = -1.#IND000000 1.0/-0.0 = -Infinity NaN + 1.0 = -1.#IND000000 NaN + NaN = -1.#IND000000 Logics Variabel 'Infinity' is infinite Variable 'nan' is not a number Press ENTER to EXIT
Python
<lang python>>>> # Extreme values from expressions >>> inf = 1e234 * 1e234 >>> _inf = 1e234 * -1e234 >>> _zero = 1 / _inf >>> nan = inf + _inf >>> inf, _inf, _zero, nan (inf, -inf, -0.0, nan) >>> # Print >>> for value in (inf, _inf, _zero, nan): print (value)
inf -inf -0.0 nan >>> # Extreme values from other means >>> float('nan') nan >>> float('inf') inf >>> float('-inf') -inf >>> -0. -0.0 >>> # Some arithmetic >>> nan == nan False >>> nan is nan True >>> 0. == -0. True >>> 0. is -0. False >>> inf + _inf nan >>> 0.0 * nan nan >>> nan * 0.0 nan >>> 0.0 * inf nan >>> inf * 0.0 nan</lang>
<lang python>>>> # But note! >>> 1 / -0.0
Traceback (most recent call last):
File "<pyshell#106>", line 1, in <module> 1 / -0.0
ZeroDivisionError: float division by zero >>> # (Not minus infinity)</lang>
R
<lang r># 0 and -0 are recognized but are both printed as simply 0. 1/c(0, -0, Inf, -Inf, NaN)
- Inf -Inf 0 0 NaN</lang>
Racket
<lang Racket>#lang racket (define division-by-zero (/ 1.0 0.0)) ;+inf.0 (define negative-inf (- (/ 1.0 0.0))) ;-inf.0 (define zero 0.0) ;0.0 (define negative-zero (- 0.0)) ;-0.0 (define nan (/ 0.0 0.0)) ;+nan.0
(displayln division-by-zero) (displayln negative-inf) (displayln zero) (displayln negative-zero) (displayln nan)
(+ zero negative-zero) ;0.0 (- negative-inf division-by-zero) ; +nan.0 (+ zero nan) ; +nan.0 (= nan +nan.0) ;#f </lang>
This values can be assigned to a variable just as normal values
Ruby
<lang ruby>inf = 1.0 / 0.0 #=> Infinity nan = 0.0 / 0.0 #=> NaN
expression = [
"1.0 / 0.0", "-1.0 / 0.0", "0.0 / 0.0", "- 0.0", "inf + 1", "5 - inf", "inf * 5", "inf / 5", "inf * 0", "1.0 / inf", "-1.0 / inf", "inf + inf", "inf - inf", "inf * inf", "inf / inf", "inf * 0.0", " 0 < inf", "inf == inf", "nan + 1", "nan * 5", "nan - nan", "nan * inf", "- nan", "nan == nan", "nan > 0", "nan < 0", "nan == 0", "nan <=> 0.0", "0.0 == -0.0",
]
expression.each do |exp|
puts "%15s => %p" % [exp, eval(exp)]
end</lang>
- Output:
1.0 / 0.0 => Infinity -1.0 / 0.0 => -Infinity 0.0 / 0.0 => NaN - 0.0 => -0.0 inf + 1 => Infinity 5 - inf => -Infinity inf * 5 => Infinity inf / 5 => Infinity inf * 0 => NaN 1.0 / inf => 0.0 -1.0 / inf => -0.0 inf + inf => Infinity inf - inf => NaN inf * inf => Infinity inf / inf => NaN inf * 0.0 => NaN 0 < inf => true inf == inf => true nan + 1 => NaN nan * 5 => NaN nan - nan => NaN nan * inf => NaN - nan => NaN nan == nan => false nan > 0 => false nan < 0 => false nan == 0 => false nan <=> 0.0 => nil 0.0 == -0.0 => true
Scala
<lang Scala>object ExtremeFloatingPoint extends App {
val negInf = -1.0 / 0.0 //also Double.NegativeInfinity val inf = 1.0 / 0.0 // //also Double.PositiveInfinity val nan = 0.0 / 0.0 // //also Double.NaN val negZero = -2.0 / inf
println("Value: Result: Infinity? Whole?") println(f"Negative inf: ${negInf}%9s ${negInf.isInfinity}%9s ${negInf.isWhole}%9s") println(f"Positive inf: ${inf}%9s ${inf.isInfinity}%9s ${inf.isWhole}%9s") println(f"NaN: ${nan}%9s ${nan.isInfinity}%9s ${nan.isWhole}%9s") println(f"Negative 0: ${negZero}%9s ${negZero.isInfinity}%9s ${negZero.isWhole}%9s") println(f"inf + -inf: ${inf + negInf}%9s ${(inf + negInf).isInfinity}%9s ${(inf + negInf).isWhole}%9s") println(f"0 * NaN: ${0 * nan}%9s ${(inf + negInf).isInfinity}%9s ${(inf + negInf).isWhole}%9s") println(f"NaN == NaN: ${nan == nan}%9s")
}</lang>
- Output:
Value: Result: Infinity? Whole? Negative inf: -Infinity true false Positive inf: Infinity true false NaN: NaN false false Negative 0: -0.0 false true inf + -inf: NaN false false 0 * NaN: NaN false false NaN == NaN: false
Scheme
<lang Scheme>(define infinity (/ 1.0 0.0)) (define minus-infinity (- infinity)) (define zero 0.0) (define minus-zero (- zero)) (define not-a-number (/ 0.0 0.0))
(equal? (list infinity minus-infinity zero minus-zero not-a-number)
(list +inf.0 -inf.0 0.0 -0.0 +nan.0))
- #t
</lang>
Seed7
The type float works according to IEEE 754. Constants like Infinity and NaN are predefined in the library float.s7i. A zero is always written without sign (e.g.: write(-0.0) writes 0.0, and write(-0.004 digits 2); writes 0.00). To recognize negative zero the function isNegativeZero can be used. NaN can be checked with isNaN.
<lang seed7>$ include "seed7_05.s7i";
include "float.s7i";
const proc: main is func
begin writeln("positive infinity: " <& Infinity); writeln("negative infinity: " <& -Infinity); writeln("negative zero: " <& -0.0); writeln("not a number: " <& NaN);
# some arithmetic writeln("+Infinity + 2.0 = " <& Infinity + 2.0); writeln("+Infinity - 10.1 = " <& Infinity - 10.1); writeln("+Infinity + -Infinity = " <& Infinity + -Infinity); writeln("0.0 * +Infinity = " <& 0.0 * Infinity); writeln("1.0/-0.0 = " <& 1.0 / -0.0); writeln("NaN + 1.0 = " <& NaN + 1.0); writeln("NaN + NaN = " <& NaN + NaN);
# some comparisons writeln("NaN = NaN = " <& NaN = NaN); writeln("isNaN(NaN) = " <& isNaN(NaN)); writeln("0.0 = -0.0 = " <& 0.0 = -0.0); writeln("isNegativeZero(-0.0) = " <& isNegativeZero(-0.0)); writeln("isNegativeZero(0.0) = " <& isNegativeZero(0.0)); end func;</lang>
- Output:
positive infinity: Infinity negative infinity: -Infinity negative zero: 0.0 not a number: NaN +Infinity + 2.0 = Infinity +Infinity - 10.1 = Infinity +Infinity + -Infinity = NaN 0.0 * +Infinity = NaN 1.0/-0.0 = -Infinity NaN + 1.0 = NaN NaN + NaN = NaN NaN = NaN = FALSE isNaN(NaN) = TRUE 0.0 = -0.0 = TRUE isNegativeZero(-0.0) = TRUE isNegativeZero(0.0) = FALSE
Swift
<lang swift>let negInf = -1.0 / 0.0 let inf = 1.0 / 0.0 //also Double.infinity let nan = 0.0 / 0.0 //also Double.NaN let negZero = -2.0 / inf
println("Negative inf: \(negInf)") println("Positive inf: \(inf)") println("NaN: \(nan)") println("Negative 0: \(negZero)") println("inf + -inf: \(inf + negInf)") println("0 * NaN: \(0 * nan)") println("NaN == NaN: \(nan == nan)")</lang>
- Output:
Negative inf: -inf Positive inf: inf NaN: nan Negative 0: -0.0 inf + -inf: nan 0 * NaN: nan NaN == NaN: false
Tcl
Tcl includes support in expressions for all IEEE “extreme” values except for NaN, which it throws a catchable exception on encountering numerically. Moreover, all can be just written directly as literals (they are parsed case-insensitively). For example, see this log of an interactive session: <lang tcl>% package require Tcl 8.5 8.5.2 % expr inf+1 Inf % set inf_val [expr {1.0 / 0.0}] Inf % set neginf_val [expr {-1.0 / 0.0}] -Inf % set negzero_val [expr {1.0 / $neginf_val}] -0.0 % expr {0.0 / 0.0} domain error: argument not in valid range % expr nan domain error: argument not in valid range % expr {1/-inf} -0.0</lang> It is possible to introduce a real NaN though numeric computation, but only by using the mechanisms for dealing with external binary data (it being judged better to just deal with it in that case rather than throwing an exception): <lang tcl>% binary scan [binary format q nan] q nan 1 % puts $nan NaN % # Show that it is a real NaN in there % expr {$nan+0} can't use non-numeric floating-point value as operand of "+"</lang>
- Programming Tasks
- Solutions by Programming Task
- Irrational numbers
- BBC BASIC/Omit
- Golfscript/Omit
- Retro/Omit
- Ada
- AWK
- Bc
- C
- Clojure
- D
- Delphi
- Eiffel
- Euphoria
- Forth
- Go
- Groovy
- Icon
- Unicon
- J
- Java
- Jq
- Mathematica
- Maxima
- MUMPS
- NetRexx
- Nim
- OCaml
- Oforth
- Oz
- PARI/GP
- Pascal
- Perl
- Perl 6
- Phix
- PicoLisp
- PureBasic
- Python
- R
- Racket
- Ruby
- Scala
- Scheme
- Seed7
- Swift
- Tcl