View source for Van der Corput sequence

{{task}}
When counting integers in binary, if you put a (binary) point to the right of the count then the column immediately to the left denotes a digit with a multiplier of <math>2^0</math>; the digit in the next column to the left has a multiplier of <math>2^1</math>; and so on.

So in the following table:
<pre>  0.
  1.
 10.
 11.
 ...</pre>
the binary number "<code>10</code>" is <math>1 \times 2^1 + 0 \times 2^0</math>.

You can also have binary digits to the right of the “point”, just as in the decimal number system. In that case, the digit in the place immediately to the right of the point has a weight of <math>2^{-1}</math>, or <math>1/2</math>. 
The weight for the second column to the right of the point is <math>2^{-2}</math> or <math>1/4</math>. And so on.

If you take the integer binary count of the first table, and ''reflect'' the digits about the binary point, you end up with '''the van der Corput sequence of numbers in base 2'''.

<pre>  .0
  .1
  .01
  .11
  ...</pre>

The third member of the sequence, binary <code>0.01</code>, is therefore <math>0 \times 2^{-1} + 1 \times 2^{-2}</math> or <math>1/4</math>.

<br> [[File:Van der corput distribution.png|400|thumb|right|Distribution of 2500 points each: Van der Corput (top) vs pseudorandom]] Members of the sequence lie within the interval <math>0 \leq x < 1</math>. Points within the sequence tend to be evenly distributed which is a useful trait to have for [[wp:Monte Carlo method|Monte Carlo simulations]]. 
This sequence is also a superset of the numbers representable by the "fraction" field of [[wp:IEEE 754-1985|an old IEEE floating point standard]]. In that standard, the "fraction" field represented the fractional part of a binary number beginning with "1." e.g. 1.101001101.

'''Hint'''

A ''hint'' at a way to generate members of the sequence is to modify a routine used to change the base of an integer:
<syntaxhighlight lang="python">>>> def base10change(n, base):
	digits = []
	while n:
		n,remainder = divmod(n, base)
		digits.insert(0, remainder)
	return digits

>>> base10change(11, 2)
[1, 0, 1, 1]</syntaxhighlight>
the above showing that <code>11</code> in decimal is <math>1\times 2^3 + 0\times 2^2 + 1\times 2^1 + 1\times 2^0</math>.<br>
Reflected this would become <code>.1101</code> or <math>1\times 2^{-1} + 1\times 2^{-2} + 0\times 2^{-3} + 1\times 2^{-4}</math>


;Task description:
* Create a function/method/routine that given ''n'', generates the ''n'''th term of the van der Corput sequence in base 2.
* Use the function to compute ''and display'' the first ten members of the sequence. (The first member of the sequence is for ''n''=0).

* As a stretch goal/extra credit, compute and show members of the sequence for bases other than 2.



;See also:
* [http://www.puc-rio.br/marco.ind/quasi_mc.html#low_discrep The Basic Low Discrepancy Sequences]
* [[Non-decimal radices/Convert]]
* [[wp:Van der Corput sequence|Van der Corput sequence]]
<br><br>

=={{header|11l}}==
{{trans|Python}}

<syntaxhighlight lang="11l">F vdc(=n, base = 2)
   V (vdc, denom) = (0.0, 1)
   L n != 0
      denom *= base
      (n, V remainder) = divmod(n, base)
      vdc += Float(remainder) / denom
   R vdc

print((0.<10).map(i -> vdc(i)))
print((0.<10).map(i -> vdc(i, 3)))</syntaxhighlight>

{{out}}
<pre>
[0, 0.5, 0.25, 0.75, 0.125, 0.625, 0.375, 0.875, 0.0625, 0.5625]
[0, 0.333333, 0.666667, 0.111111, 0.444444, 0.777778, 0.222222, 0.555556, 0.888889, 0.037037]
</pre>

=={{header|360 Assembly}}==
{{trans|BBC BASIC}}
The program uses two ASSIST macros (XDECO,XPRNT) to keep the code as short as possible. 
<syntaxhighlight lang="360asm">*        Van der Corput sequence   31/01/2017
VDCS     CSECT
         USING  VDCS,R13           base register
         B      72(R15)            skip savearea
         DC     17F'0'             savearea
         STM    R14,R12,12(R13)    prolog
         ST     R13,4(R15)         " <-
         ST     R15,8(R13)         " ->
         LR     R13,R15            " addressability
         ZAP    B,=P'2'            b=2  (base)
         ZAP    M,=P'-1'           m=-1
         SR     R6,R6              i=0
LOOPI    CH     R6,=H'10'          do i=0 to 10
         BH     ELOOPI
         AP     M,=P'1'            w=m+1
         ZAP    V,=P'0'            v=0
         ZAP    S,=P'1'            s=1
         ZAP    N,M                n=m
WHILE    CP     N,=P'0'            do while n<>0
         BE     EWHILE
         MP     S,B                s=s*b
         ZAP    PL16,N             n
         DP     PL16,B             n/b
         ZAP    W,PL16+8(8)        w=n mod b 
         MP     W,=P'100000'       *100000
         ZAP    PL16,W             w
         DP     PL16,S             w/s
         ZAP    W,PL16(8)          w=w/s
         AP     V,W                v=v+(n mod b)*100000/s
         ZAP    PL16,N             n
         DP     PL16,B             n/b
         ZAP    N,PL16(8)          n=n/b
         B      WHILE
EWHILE   XDECO  R6,XDEC            edit i
         MVC    PG+0(3),XDEC+9     output i
         MVC    PG+3(3),=C' 0.'
         UNPK   Z,V                unpack v
         OI     Z+L'Z-1,X'F0'      edit v
         MVC    PG+6(5),Z+11       output v  (v/100000)
         XPRNT  PG,L'PG            print buffer
         LA     R6,1(R6)           i=i+1
         B      LOOPI
ELOOPI   L      R13,4(0,R13)       epilog 
         LM     R14,R12,12(R13)    " restore
         XR     R15,R15            " rc=0
         BR     R14                exit
B        DS     PL8
M        DS     PL8
V        DS     PL8
S        DS     PL8
N        DS     PL8
W        DS     PL8                packed 
Z        DS     ZL16               zoned
PL16     DS     PL16               packed max
PG       DC     CL80' '            buffer
XDEC     DS     CL12               work area for xdeco
         YREGS
         END    VDCS</syntaxhighlight>
{{out}}
<pre>
  0 0.00000
  1 0.50000
  2 0.25000
  3 0.75000
  4 0.12500
  5 0.62500
  6 0.37500
  7 0.87500
  8 0.06250
  9 0.56250
 10 0.31250
</pre>

=={{header|Action!}}==
{{libheader|Action! Tool Kit}}
<syntaxhighlight lang="action!">INCLUDE "D2:REAL.ACT" ;from the Action! Tool Kit

PROC Generate(INT value,base REAL POINTER res)
  REAL denom,rbase,r1,r2

  IntToReal(0,res)
  IntToReal(1,denom)
  IntToReal(base,rbase)
  WHILE value#0
  DO
    RealMult(denom,rbase,r1)
    RealAssign(r1,denom)
    IntToReal(value MOD base,r1)
    RealDiv(r1,denom,r2)
    RealAdd(res,r2,r1)
    RealAssign(r1,res)
    value==/base
  OD
RETURN

PROC Main()
  INT value,base
  REAL res

  Put(125) PutE() ;clear the screen
  FOR base=2 TO 5
  DO
    PrintF("Base %I:%E",base)
    FOR value=0 TO 9
    DO
      Generate(value,base,res)
      PrintR(res) Put(32)
    OD
    PutE() PutE()
  OD
RETURN</syntaxhighlight>
{{out}}
[https://gitlab.com/amarok8bit/action-rosetta-code/-/raw/master/images/Van_der_Corput_sequence.png Screenshot from Atari 8-bit computer]
<pre>
Base 2:
0 .5 .25 .75 .125 .625 .375 .875 .0625 .5625

Base 3:
0 .3333333333 .6666666666 .1111111111 .4444444444 .7777777777 .2222222222 .5555555555 .8888888888 .037037037

Base 4:
0 .25 .5 .75 .0625 .3125 .5625 .8125 .125 .375

Base 5:
0 .2 .4 .6 .8 .04 .24 .44 .64 .84
</pre>

=={{header|ActionScript}}==
This implementation uses logarithms to computes the nth term of the sequence at any base. Numbers in the output are rounded to 6 decimal places to hide any floating point inaccuracies.
<syntaxhighlight lang="actionscript3">
package {
	
    import flash.display.Sprite;
    import flash.events.Event;
    
    public class VanDerCorput extends Sprite {
        
        public function VanDerCorput():void {
            if (stage) init();
            else addEventListener(Event.ADDED_TO_STAGE, init);
        }
        
        private function init(e:Event = null):void {
            
            removeEventListener(Event.ADDED_TO_STAGE, init);
            
            var base2:Vector.<Number> = new Vector.<Number>(10, true);
            var base3:Vector.<Number> = new Vector.<Number>(10, true);
            var base4:Vector.<Number> = new Vector.<Number>(10, true);
            var base5:Vector.<Number> = new Vector.<Number>(10, true);
            var base6:Vector.<Number> = new Vector.<Number>(10, true);
            var base7:Vector.<Number> = new Vector.<Number>(10, true);
            var base8:Vector.<Number> = new Vector.<Number>(10, true);
            
            var i:uint;
            
            for ( i = 0; i < 10; i++ ) {
                base2[i] = Math.round( _getTerm(i, 2) * 1000000 ) / 1000000;
                base3[i] = Math.round( _getTerm(i, 3) * 1000000 ) / 1000000;
                base4[i] = Math.round( _getTerm(i, 4) * 1000000 ) / 1000000;
                base5[i] = Math.round( _getTerm(i, 5) * 1000000 ) / 1000000;
                base6[i] = Math.round( _getTerm(i, 6) * 1000000 ) / 1000000;
                base7[i] = Math.round( _getTerm(i, 7) * 1000000 ) / 1000000;
                base8[i] = Math.round( _getTerm(i, 8) * 1000000 ) / 1000000;
            }
            
            trace("Base 2: " + base2.join(', '));
            trace("Base 3: " + base3.join(', '));
            trace("Base 4: " + base4.join(', '));
            trace("Base 5: " + base5.join(', '));
            trace("Base 6: " + base6.join(', '));
            trace("Base 7: " + base7.join(', '));
            trace("Base 8: " + base8.join(', '));
            
        }
        
        private function _getTerm(n:uint, base:uint = 2):Number {
            
            var r:Number = 0, p:uint, digit:uint;
            var baseLog:Number = Math.log(base);
            
            while ( n > 0 ) {
                p = Math.pow( base, uint(Math.log(n) / baseLog) );
                
                digit = n / p;
                n %= p;
                r += digit / (p * base);
            }
            
            return r;
            
        }
        
    }

}
</syntaxhighlight>
{{out}}
<pre>
Base 2: 0, 0.5, 0.25, 0.75, 0.125, 0.625, 0.375, 0.875, 0.0625, 0.5625
Base 3: 0, 0.333333, 0.666667, 0.111111, 0.444444, 0.777778, 0.222222, 0.555556, 0.888889, 0.037037
Base 4: 0, 0.25, 0.5, 0.75, 0.0625, 0.3125, 0.5625, 0.8125, 0.125, 0.375
Base 5: 0, 0.2, 0.4, 0.6, 0.8, 0.04, 0.24, 0.44, 0.64, 0.84
Base 6: 0, 0.166667, 0.333333, 0.5, 0.666667, 0.833333, 0.027778, 0.194444, 0.361111, 0.527778
Base 7: 0, 0.142857, 0.285714, 0.428571, 0.571429, 0.714286, 0.857143, 0.020408, 0.163265, 0.306122
Base 8: 0, 0.125, 0.25, 0.375, 0.5, 0.625, 0.75, 0.875, 0.015625, 0.140625
</pre>

=={{header|Ada}}==
<syntaxhighlight lang="ada">with Ada.Text_IO;

procedure Main is
   package Float_IO is new Ada.Text_IO.Float_IO (Float);
   function Van_Der_Corput (N : Natural; Base : Positive := 2) return Float is
      Value    : Natural  := N;
      Result   : Float    := 0.0;
      Exponent : Positive := 1;
   begin
      while Value > 0 loop
         Result   := Result +
                     Float (Value mod Base) / Float (Base ** Exponent);
         Value    := Value / Base;
         Exponent := Exponent + 1;
      end loop;
      return Result;
   end Van_Der_Corput;
begin
   for Base in 2 .. 5 loop
      Ada.Text_IO.Put ("Base" & Integer'Image (Base) & ":");
      for N in 1 .. 10 loop
         Ada.Text_IO.Put (' ');
         Float_IO.Put (Item => Van_Der_Corput (N, Base), Exp => 0);
      end loop;
      Ada.Text_IO.New_Line;
   end loop;
end Main;</syntaxhighlight>

{{out}}
<pre>Base 2:  0.50000  0.25000  0.75000  0.12500  0.62500  0.37500  0.87500  0.06250  0.56250  0.31250
Base 3:  0.33333  0.66667  0.11111  0.44444  0.77778  0.22222  0.55556  0.88889  0.03704  0.37037
Base 4:  0.25000  0.50000  0.75000  0.06250  0.31250  0.56250  0.81250  0.12500  0.37500  0.62500
Base 5:  0.20000  0.40000  0.60000  0.80000  0.04000  0.24000  0.44000  0.64000  0.84000  0.08000</pre>

=={{header|ALGOL 68}}==
{{Trans|C}}
<syntaxhighlight lang="algol68">
BEGIN # show members of the van der Corput sequence in various bases         #
      # translated from the C sample                                         #

    # sets num and denom to the numerator and denominator of the nth member  #
    # of the van der Corput sequence in the specified base                   #
    PROC vc = ( INT nth, base,  REF INT num, denom )VOID:
         BEGIN
            INT p := 0, q := 1, n := nth;

            WHILE n /= 0 DO
                p    *:= base +:= n MOD base;
                q    *:= base;
                n OVERAB base
            OD;

            num   := p;  
            denom := q;

            # reduce the numerrator and denominator by their gcd             #
            WHILE p /= 0 DO n := p; p := q MOD p; q := n OD;
            num   OVERAB q;
            denom OVERAB q
         END # vc # ;

    # task                                                                   #
    FOR b FROM 2 TO 5 DO
        print( ( "base ", whole( b, 0 ), ":" ) );
        FOR i FROM 0 TO 9 DO
            INT d, n;
            vc( i, b, n, d );
            IF n /= 0
            THEN print( ( "  ", whole( n, 0 ), "/", whole( d, 0 ) ) )
            ELSE print( ( "  0" ) )
            FI
        OD;
        print( ( newline ) )
    OD
END
</syntaxhighlight>
{{out}}
<pre>
base 2:  0  1/2  1/4  3/4  1/8  5/8  3/8  7/8  1/16  9/16
base 3:  0  1/3  2/3  1/9  4/9  7/9  2/9  5/9  8/9  1/27
base 4:  0  1/4  1/2  3/4  1/16  5/16  9/16  13/16  1/8  3/8
base 5:  0  1/5  2/5  3/5  4/5  1/25  6/25  11/25  16/25  21/25
</pre>

=={{header|Arturo}}==

<syntaxhighlight lang="arturo">corput: function [num, base][
    result: to :rational 0
    b: 1 // base
    n: num
    while [not? zero? n][
        result: result + b * n % base
        n: n / base
        b: b // base
    ]
    return result
]

loop 2..5 'bs ->
    print ["Base" bs ":" join.with:", " to [:string] map 1..10 'z -> corput z bs]</syntaxhighlight>

{{out}}

<pre>Base 2 : 1/2, 1/4, 3/4, 1/8, 5/8, 3/8, 7/8, 1/16, 9/16, 5/16 
Base 3 : 1/3, 2/3, 1/9, 4/9, 7/9, 2/9, 5/9, 8/9, 1/27, 10/27 
Base 4 : 1/4, 1/2, 3/4, 1/16, 5/16, 9/16, 13/16, 1/8, 3/8, 5/8 
Base 5 : 1/5, 2/5, 3/5, 4/5, 1/25, 6/25, 11/25, 16/25, 21/25, 2/25</pre>

=={{header|AutoHotkey}}==
{{works with|AutoHotkey_L}}
<syntaxhighlight lang="autohotkey">SetFormat, FloatFast, 0.5
for i, v in [2, 3, 4, 5, 6] {
    seq .= "Base " v ": "
    Loop, 10
        seq .= VanDerCorput(A_Index - 1, v) (A_Index = 10 ? "`n" : ", ")
}
MsgBox, % seq

VanDerCorput(n, b, r=0) {
    while n
        r += Mod(n, b) * b ** -A_Index, n := n // b
    return, r
}</syntaxhighlight>
{{out}}
<pre>Base 2: 0, 0.50000, 0.25000, 0.75000, 0.12500, 0.62500, 0.37500, 0.87500, 0.06250, 0.56250
Base 3: 0, 0.33333, 0.66667, 0.11111, 0.44444, 0.77778, 0.22222, 0.55555, 0.88889, 0.03704
Base 4: 0, 0.25000, 0.50000, 0.75000, 0.06250, 0.31250, 0.56250, 0.81250, 0.12500, 0.37500
Base 5: 0, 0.20000, 0.40000, 0.60000, 0.80000, 0.04000, 0.24000, 0.44000, 0.64000, 0.84000
Base 6: 0, 0.16667, 0.33333, 0.50000, 0.66667, 0.83333, 0.02778, 0.19445, 0.36111, 0.52778</pre>

=={{header|AWK}}==
<syntaxhighlight lang="awk">
# syntax: GAWK -f VAN_DER_CORPUT_SEQUENCE.AWK
# converted from BBC BASIC
BEGIN {
    printf("base")
    for (i=0; i<=9; i++) {
      printf(" %7d",i)
    }
    printf("\n")
    for (base=2; base<=5; base++) {
      printf("%-4s",base)
      for (i=0; i<=9; i++) {
        printf(" %7.5f",vdc(i,base))
      }
      printf("\n")
    }
    exit(0)
}
function vdc(n,b,  s,v) {
    s = 1
    while (n) {
      s *= b
      v += (n % b) / s
      n /= b
      n = int(n)
    }
    return(v)
}
</syntaxhighlight>
<p>Output:</p>
<pre>
base       0       1       2       3       4       5       6       7       8       9
2    0.00000 0.50000 0.25000 0.75000 0.12500 0.62500 0.37500 0.87500 0.06250 0.56250
3    0.00000 0.33333 0.66667 0.11111 0.44444 0.77778 0.22222 0.55556 0.88889 0.03704
4    0.00000 0.25000 0.50000 0.75000 0.06250 0.31250 0.56250 0.81250 0.12500 0.37500
5    0.00000 0.20000 0.40000 0.60000 0.80000 0.04000 0.24000 0.44000 0.64000 0.84000
</pre>

=={{header|BASIC}}==
{{trans|C}}
<syntaxhighlight lang="basic">10 DEFINT A-Z
20 FOR B=2 TO 5
30 PRINT USING "BASE #:";B;
40 FOR I=0 TO 9
50 P=0: Q=1: N=I
60 IF N=0 GOTO 110
70 P=P*B+N MOD B
80 Q=Q*B
90 N=N\B
100 GOTO 60
110 X=P: Y=Q
120 IF P=0 GOTO 150
130 N=P: P=Q MOD P: Q=N
140 GOTO 120
150 X=X\Q
160 Y=Y\Q
170 IF X=0 THEN PRINT "   0"; ELSE PRINT USING "  ##/##";X;Y;
180 NEXT I
190 PRINT
200 NEXT B</syntaxhighlight>
{{out}}
<pre>BASE 2:   0   1/ 2   1/ 4   3/ 4   1/ 8   5/ 8   3/ 8   7/ 8   1/16   9/16
BASE 3:   0   1/ 3   2/ 3   1/ 9   4/ 9   7/ 9   2/ 9   5/ 9   8/ 9   1/27
BASE 4:   0   1/ 4   1/ 2   3/ 4   1/16   5/16   9/16  13/16   1/ 8   3/ 8
BASE 5:   0   1/ 5   2/ 5   3/ 5   4/ 5   1/25   6/25  11/25  16/25  21/25</pre>

==={{header|BASIC256}}===
<syntaxhighlight lang="basic256">function num_base$(number, base)
	if base > 9 then
		print "base not handled by function"
		pause 5
		return ""
	end if

	ans$ = ""

	while number <> 0
		n = (number mod base)
		ans$ = string(n) + ans$
		number = number \ base
	end while

	if ans$ = "" then ans$ = "0"

	return "." + ans$
end function

for k = 2 to 5
	print "Base = "; k
	for l = 0 to 12
		print ljust(num_base$(l, k), 6);
	next l
	print : print
next k
end</syntaxhighlight>

==={{header|Yabasic}}===
<syntaxhighlight lang="yabasic">sub num_base$(number, base)
    if _base_ > 9 then
        print "base not handled by function"
        sleep 5000
        return ""
    end if
       
    while number <> 0
        n = mod(number, base)
        ans$ = str$(n) + ans$
        number = int(number / base)
    wend
    
    if ans$ = "" then ans$ = "0" : fi
    
    return "." + ans$
end sub

for k = 2 to 5
    print "Base = ", k
    for l = 0 to 12
        print left$(num_base$(l, k), 7), "  ";
    next l
    print : print
next k
end</syntaxhighlight>


=={{header|BBC BASIC}}==
{{works with|BBC BASIC for Windows}}
<syntaxhighlight lang="bbcbasic">      @% = &20509
      FOR base% = 2 TO 5
        PRINT "Base " ; STR$(base%) ":"
        FOR number% = 0 TO 9
          PRINT FNvdc(number%, base%);
        NEXT
        PRINT
      NEXT
      END
      
      DEF FNvdc(n%, b%)
      LOCAL v, s%
      s% = 1
      WHILE n%
        s% *= b%
        v += (n% MOD b%) / s%
        n% DIV= b%
      ENDWHILE
      = v</syntaxhighlight>
{{out}}
<pre>
Base 2:
  0.00000  0.50000  0.25000  0.75000  0.12500  0.62500  0.37500  0.87500  0.06250  0.56250
Base 3:
  0.00000  0.33333  0.66667  0.11111  0.44444  0.77778  0.22222  0.55556  0.88889  0.03704
Base 4:
  0.00000  0.25000  0.50000  0.75000  0.06250  0.31250  0.56250  0.81250  0.12500  0.37500
Base 5:
  0.00000  0.20000  0.40000  0.60000  0.80000  0.04000  0.24000  0.44000  0.64000  0.84000
</pre>

=={{header|bc}}==
This solution hardcodes the literal <tt>10</tt> because [[Literals/Integer#bc|numeric literals in bc]] can use any base from 2 to 16. This solution only works with integer bases from 2 to 16.

<syntaxhighlight lang="bc">/*
 * Return the _n_th term of the van der Corput sequence.
 * Uses the current _ibase_.
 */
define v(n) {
	auto c, r, s

	s = scale
	scale = 0  /* to use integer division */

	/*
	 * c = count digits of n
	 * r = reverse the digits of n
	 */
	for (0; n != 0; n /= 10) {
		c += 1
		r = (10 * r) + (n % 10)
	}

	/* move radix point to left of digits */
	scale = length(r) + 6
	r /= 10 ^ c

	scale = s
	return r
}

t = 10
for (b = 2; b <= 4; b++) {
	"base "; b
	obase = b
	for (i = 0; i < 10; i++) {
		ibase = b
		"  "; v(i)
		ibase = t
	}
	obase = t
}
quit</syntaxhighlight>

Some of the calculations are not exact, because bc performs calculations using base 10. So the program prints a result like <tt>.202222221</tt> (base 3) when the exact result would be <tt>.21</tt> (base 3).

{{out}}
<pre style="overflow: auto; height: 15em;">base 2
  0.00000000000000
  .10000000000000
  .01000000000000
  .11000000000000
  .00100000000000
  .10100000000000
  .01100000000000
  .11100000000000
  .00010000000000
  .10010000000000
base 3
  0.000000000
  .022222222
  .122222221
  .002222222
  .102222222
  .202222221
  .012222222
  .112222221
  .212222221
  .000222222
base 4
  0.0000000
  .1000000
  .2000000
  .3000000
  .0100000
  .1100000
  .2100000
  .310000000
  .0200000
  .1200000</pre>

=={{header|BCPL}}==
{{trans|C}}
<syntaxhighlight lang="bcpl">get "libhdr"

let corput(n, base, num, denom) be
$(  let p = 0 and q = 1
    until n=0
    $(  p := p * base + n rem base
        q := q * base
        n := n / base
    $)
    
    !num := p
    !denom := q
    
    until p=0
    $(  n := p
        p := q rem p
        q := n
    $)
    
    !num := !num / q
    !denom := !denom / q
$)

let writefrac(num, denom) be
    test num=0 
        do writes("  0")
        or writef("  %N/%N", num, denom)
   
let start() be
$(  let num = ? and denom = ?
    for base=2 to 5
    $(  writef("base %N:", base)
        for i=0 to 9
        $(  corput(i, base, @num, @denom)
            writefrac(num, denom)
        $)
        wrch('*N')
    $)
$)</syntaxhighlight>
{{out}}
<pre>base 2:  0  1/2  1/4  3/4  1/8  5/8  3/8  7/8  1/16  9/16
base 3:  0  1/3  2/3  1/9  4/9  7/9  2/9  5/9  8/9  1/27
base 4:  0  1/4  1/2  3/4  1/16  5/16  9/16  13/16  1/8  3/8
base 5:  0  1/5  2/5  3/5  4/5  1/25  6/25  11/25  16/25  21/25</pre>

=={{header|C}}==
<syntaxhighlight lang="c">#include <stdio.h>

void vc(int n, int base, int *num, int *denom)
{
        int p = 0, q = 1;

        while (n) {
                p = p * base + (n % base);
                q *= base;
                n /= base;
        }

        *num = p;  
        *denom = q;

        while (p) { n = p; p = q % p; q = n; }
        *num /= q;
        *denom /= q;
}

int main()
{
        int d, n, i, b;
        for (b = 2; b < 6; b++) {
                printf("base %d:", b);
                for (i = 0; i < 10; i++) {
                        vc(i, b, &n, &d);
                        if (n) printf("  %d/%d", n, d);
                        else   printf("  0");
                }
                printf("\n");
        }

        return 0;
}</syntaxhighlight>
{{out}}
<pre>base 2:  0  1/2  1/4  3/4  1/8  5/8  3/8  7/8  1/16  9/16
base 3:  0  1/3  2/3  1/9  4/9  7/9  2/9  5/9  8/9  1/27
base 4:  0  1/4  1/2  3/4  1/16  5/16  9/16  13/16  1/8  3/8
base 5:  0  1/5  2/5  3/5  4/5  1/25  6/25  11/25  16/25  21/25</pre>

=={{header|C sharp}}==

This is based on the C version.<br/>
It uses LINQ and enumeration over a collection 
to package the sequence and make it easy to use.
Note that the iterator returns a generic Tuple 
whose items are the numerator and denominator for the item.

<syntaxhighlight lang="csharp">
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;

namespace VanDerCorput
{
    /// <summary>
    /// Computes the Van der Corput sequence for any number base.
    /// The numbers in the sequence vary from zero to one, including zero but excluding one.
    /// The sequence possesses low discrepancy.
    /// Here are the first ten terms for bases 2 to 5:
    /// 
    /// base 2:  0  1/2  1/4  3/4  1/8  5/8  3/8  7/8  1/16  9/16
    /// base 3:  0  1/3  2/3  1/9  4/9  7/9  2/9  5/9  8/9  1/27
    /// base 4:  0  1/4  1/2  3/4  1/16  5/16  9/16  13/16  1/8  3/8
    /// base 5:  0  1/5  2/5  3/5  4/5  1/25  6/25  11/25  16/25  21/25
    /// </summary>
    /// <see cref="http://rosettacode.org/wiki/Van_der_Corput_sequence"/>
    public class VanDerCorputSequence: IEnumerable<Tuple<long,long>>
    {
        /// <summary>
        /// Number base for the sequence, which must bwe two or more.
        /// </summary>
        public int Base { get; private set; }

        /// <summary>
        /// Maximum number of terms to be returned by iterator.
        /// </summary>
        public long Count { get; private set; }

        /// <summary>
        /// Construct a sequence for the given base.
        /// </summary>
        /// <param name="iBase">Number base for the sequence.</param>
        /// <param name="count">Maximum number of items to be returned by the iterator.</param>
        public VanDerCorputSequence(int iBase, long count = long.MaxValue) {
            if (iBase < 2)
                throw new ArgumentOutOfRangeException("iBase", "must be two or greater, not the given value of " + iBase);
            Base = iBase;
            Count = count;
        }

        /// <summary>
        /// Compute nth term in the Van der Corput sequence for the base specified in the constructor.
        /// </summary>
        /// <param name="n">The position in the sequence, which may be zero or any positive number.</param>
        /// This number is always an integral power of the base.</param>
        /// <returns>The Van der Corput sequence value expressed as a Tuple containing a numerator and a denominator.</returns>
        public Tuple<long,long> Compute(long n)
        {
            long p = 0, q = 1;
            long numerator, denominator;
            while (n != 0)
            {
                p = p * Base + (n % Base);
                q *= Base;
                n /= Base;
            }
            numerator = p;
            denominator = q;
            while (p != 0) 
            { 
                n = p; 
                p = q % p; 
                q = n; 
            }
            numerator /= q;
            denominator /= q;
            return new Tuple<long,long>(numerator, denominator);
        }

        /// <summary>
        /// Compute nth term in the Van der Corput sequence for the given base.
        /// </summary>
        /// <param name="iBase">Base to use for the sequence.</param>
        /// <param name="n">The position in the sequence, which may be zero or any positive number.</param>
        /// <returns>The Van der Corput sequence value expressed as a Tuple containing a numerator and a denominator.</returns>
        public static Tuple<long, long> Compute(int iBase, long n)
        {
            var seq = new VanDerCorputSequence(iBase);
            return seq.Compute(n);
        }

        /// <summary>
        /// Iterate over the Van Der Corput sequence.
        /// The first value in the sequence is always zero, regardless of the base.
        /// </summary>
        /// <returns>A tuple whose items are the Van der Corput value given as a numerator and denominator.</returns>
        public IEnumerator<Tuple<long, long>> GetEnumerator()
        {
            long iSequenceIndex = 0L;
            while (iSequenceIndex < Count)
            {
                yield return Compute(iSequenceIndex);
                iSequenceIndex++;
            }
        }

        System.Collections.IEnumerator System.Collections.IEnumerable.GetEnumerator()
        {
            return GetEnumerator();
        }
    }

    class Program
    {
        static void Main(string[] args)
        {
            TestBasesTwoThroughFive();

            Console.WriteLine("Type return to continue...");
            Console.ReadLine();
        }

        static void TestBasesTwoThroughFive()
        {
            foreach (var seq in Enumerable.Range(2, 5).Select(x => new VanDerCorputSequence(x, 10))) // Just the first 10 elements of the each sequence
            {
                Console.Write("base " + seq.Base + ":");
                foreach(var vc in seq) 
                    Console.Write(" " + vc.Item1 + "/" + vc.Item2);
                Console.WriteLine();
            }
        }
    }
}

</syntaxhighlight>

{{out}}
<pre>base 2: 0/1 1/2 1/4 3/4 1/8 5/8 3/8 7/8 1/16 9/16
base 3: 0/1 1/3 2/3 1/9 4/9 7/9 2/9 5/9 8/9 1/27
base 4: 0/1 1/4 1/2 3/4 1/16 5/16 9/16 13/16 1/8 3/8
base 5: 0/1 1/5 2/5 3/5 4/5 1/25 6/25 11/25 16/25 21/25
base 6: 0/1 1/6 1/3 1/2 2/3 5/6 1/36 7/36 13/36 19/36
Type return to continue...</pre>

=={{header|C++}}==
{{trans|Raku}}
<syntaxhighlight lang="cpp">#include <cmath>
#include <iostream>

double vdc(int n, double base = 2)
{
    double vdc = 0, denom = 1;
    while (n)
    {
        vdc += fmod(n, base) / (denom *= base);
        n /= base; // note: conversion from 'double' to 'int'
    }
    return vdc;
}

int main() 
{
    for (double base = 2; base < 6; ++base)
    {
        std::cout << "Base " << base << "\n";
        for (int n = 0; n < 10; ++n)
        {
            std::cout << vdc(n, base) << " ";
        }
        std::cout << "\n\n";
    }
}</syntaxhighlight>
{{out}}
<pre>
Base 2
0 0.5 0.25 0.75 0.125 0.625 0.375 0.875 0.0625 0.5625 

Base 3
0 0.333333 0.666667 0.111111 0.444444 0.777778 0.222222 0.555556 0.888889 0.037037 

Base 4
0 0.25 0.5 0.75 0.0625 0.3125 0.5625 0.8125 0.125 0.375 

Base 5
0 0.2 0.4 0.6 0.8 0.04 0.24 0.44 0.64 0.84 
</pre>

=={{header|Clojure}}==
<syntaxhighlight lang="clojure">(defn van-der-corput
  "Get the nth element of the van der Corput sequence."
  ([n]
   ;; Default base = 2
   (van-der-corput n 2))
  ([n base]
   (let [s (/ 1 base)]  ;; A multiplicand to shift to the right of the decimal.
     ;; We essentially want to reverse the digits of n and put them after the
     ;; decimal point. So, we repeatedly pull off the lowest digit of n, scale
     ;; it to the right of the decimal point, and accumulate that.
     (loop [sum 0
            n n
            scale s]
       (if (zero? n)
         sum  ;; Base case: no digits left, so we're done.
         (recur (+ sum (* (rem n base) scale))  ;; Accumulate the least digit
                (quot n base)                   ;; Drop a digit of n
                (* scale s)))))))               ;; Move farther past the decimal

(clojure.pprint/print-table
  (cons :base (range 10))  ;; column headings
  (for [base (range 2 6)]  ;; rows
    (into {:base base}
          (for [n (range 10)]  ;; table entries
            [n (van-der-corput n base)]))))</syntaxhighlight>

{{out}}
<pre>| :base | 0 |   1 |   2 |   3 |    4 |    5 |    6 |     7 |     8 |     9 |
|-------+---+-----+-----+-----+------+------+------+-------+-------+-------|
|     2 | 0 | 1/2 | 1/4 | 3/4 |  1/8 |  5/8 |  3/8 |   7/8 |  1/16 |  9/16 |
|     3 | 0 | 1/3 | 2/3 | 1/9 |  4/9 |  7/9 |  2/9 |   5/9 |   8/9 |  1/27 |
|     4 | 0 | 1/4 | 1/2 | 3/4 | 1/16 | 5/16 | 9/16 | 13/16 |   1/8 |   3/8 |
|     5 | 0 | 1/5 | 2/5 | 3/5 |  4/5 | 1/25 | 6/25 | 11/25 | 16/25 | 21/25 |</pre>

=={{header|CLU}}==
{{trans|C}}
<syntaxhighlight lang="clu">vc = proc (n, base: int) returns (int, int)
    p: int := 0
    q: int := 1
    while n ~= 0 do
        p := p * base + n // base
        q := q * base
        n := n / base
    end
    num: int := p
    denom: int := q
    while p ~= 0 do
        p, q := q // p, p
    end
    return(num/q, denom/q) 
end vc

print_frac = proc (po: stream, num, denom: int)
    if num=0 then
        stream$puts(po, "   0")
    else
        stream$puts(po, " ")
        stream$putright(po, int$unparse(num), 2)
        stream$puts(po, "/")
        stream$putright(po, int$unparse(denom), 2)
    end
end print_frac

start_up = proc ()
    po: stream := stream$primary_output()
    for base: int in int$from_to(2,5) do
        stream$puts(po, "base " || int$unparse(base) || ":")
        for i: int in int$from_to(0, 9) do
            n, d: int := vc(i, base)
            print_frac(po, n, d)
        end
        stream$putl(po, "")
    end
end start_up</syntaxhighlight>
{{out}}
<pre>base 2:   0  1/ 2  1/ 4  3/ 4  1/ 8  5/ 8  3/ 8  7/ 8  1/16  9/16
base 3:   0  1/ 3  2/ 3  1/ 9  4/ 9  7/ 9  2/ 9  5/ 9  8/ 9  1/27
base 4:   0  1/ 4  1/ 2  3/ 4  1/16  5/16  9/16 13/16  1/ 8  3/ 8
base 5:   0  1/ 5  2/ 5  3/ 5  4/ 5  1/25  6/25 11/25 16/25 21/25</pre>

=={{header|Common Lisp}}==
<syntaxhighlight lang="lisp">(defun van-der-Corput (n base)
  (loop for d = 1 then (* d base) while (<= d n)
	finally
	(return (/ (parse-integer
		     (reverse (write-to-string n :base base))
		     :radix base)
		   d))))

(loop for base from 2 to 5 do
      (format t "Base ~a: ~{~6a~^~}~%" base
	      (loop for i to 10 collect (van-der-Corput i base))))</syntaxhighlight>
{{out}}
<pre>Base 2: 0     1/2   1/4   3/4   1/8   5/8   3/8   7/8   1/16  9/16  5/16  
Base 3: 0     1/3   2/3   1/9   4/9   7/9   2/9   5/9   8/9   1/27  10/27 
Base 4: 0     1/4   1/2   3/4   1/16  5/16  9/16  13/16 1/8   3/8   5/8   
Base 5: 0     1/5   2/5   3/5   4/5   1/25  6/25  11/25 16/25 21/25 2/25</pre>

=={{header|Cowgol}}==
{{trans|C}}
<syntaxhighlight lang="cowgol">include "cowgol.coh";

sub vc(n: uint16, base: uint16): (num: uint16, denom: uint16) is
    var p: uint16 := 0;
    var q: uint16 := 1;
    
    while n != 0 loop
        p := p * base + n % base;
        q := q * base;
        n := n / base;
    end loop;
    
    num := p;
    denom := q;
    
    while p != 0 loop
        n := p;
        p := q % p;
        q := n;
    end loop;
    
    num := num / q;
    denom := denom / q;
end sub;

sub printfrac(num: uint16, denom: uint16) is
    if num == 0 then
        print("  0");
    else
        print("  ");
        print_i16(num);
        print("/");
        print_i16(denom);
    end if;
end sub;

var i: uint16;
var base: uint16;
var num: uint16;
var denom: uint16;

base := 2;
while base < 6 loop
    print("base ");
    print_i16(base);
    print(":");
    i := 0;
    while i < 10 loop
        (num, denom) := vc(i, base);
        printfrac(num, denom);
        i := i + 1;
    end loop;
    print_nl();
    base := base + 1;
end loop;</syntaxhighlight>
{{out}}
<pre>base 2:  0  1/2  1/4  3/4  1/8  5/8  3/8  7/8  1/16  9/16
base 3:  0  1/3  2/3  1/9  4/9  7/9  2/9  5/9  8/9  1/27
base 4:  0  1/4  1/2  3/4  1/16  5/16  9/16  13/16  1/8  3/8
base 5:  0  1/5  2/5  3/5  4/5  1/25  6/25  11/25  16/25  21/25</pre>

=={{header|D}}==
<syntaxhighlight lang="d">double vdc(int n, in double base=2.0) pure nothrow @safe @nogc {
    double vdc = 0.0, denom = 1.0;
    while (n) {
        denom *= base;
        vdc += (n % base) / denom;
        n /= base;
    }
    return vdc;
}

void main() {
    import std.stdio, std.algorithm, std.range;

    foreach (immutable b; 2 .. 6)
        writeln("\nBase ", b, ": ", 10.iota.map!(n => vdc(n, b)));
}</syntaxhighlight>
{{out}}
<pre>Base 2: [0, 0.5, 0.25, 0.75, 0.125, 0.625, 0.375, 0.875, 0.0625, 0.5625]

Base 3: [0, 0.333333, 0.666667, 0.111111, 0.444444, 0.777778, 0.222222, 0.555556, 0.888889, 0.037037]

Base 4: [0, 0.25, 0.5, 0.75, 0.0625, 0.3125, 0.5625, 0.8125, 0.125, 0.375]

Base 5: [0, 0.2, 0.4, 0.6, 0.8, 0.04, 0.24, 0.44, 0.64, 0.84]</pre>

=={{header|Delphi}}==
{{works with|Delphi|6.0}}
{{libheader|SysUtils,StdCtrls}}


<syntaxhighlight lang="Delphi">

function VanDerCorput(N,Base: integer): double;
{Calculate binary value for numbers right of decimal}
var Value,Exponent,Digit: integer;
begin
Value:= N; Result:= 0; Exponent:= -1;
{D1 * Base^-1 + D2 * Base^-2 + D3 * Base^-3}
while Value > 0 do
	begin
	{Get digit in specified base}
	Digit:=Value mod Base;
	{Digit * Base^-Exponent}
	Result:=Result + Digit * Power(Base,Exponent);
	{Divide by base to put next digit in place}
	Value:= Value div Base;
	{Next exponent}
	Dec(Exponent);
	end;
end;


procedure ShowVanDerCorput(Memo: TMemo);
{Show Vander Coput numbers for bases 2..8 and items 1..9 }
var Base,N: integer;
var V: double;
var S: string;
begin
S:='';
for Base:=2 to 8 do
	begin
	S:=S+Format('Base %D:',[Base]);
	for N:=1 to 10 do
		begin
		V:=VanDerCorput(N,Base);
		S:=S+Format(' %1.5f',[V]);
		end;
	S:=S+CRLF;
	end;
Memo.Lines.Add(S);
end;




</syntaxhighlight>
{{out}}
<pre>
Base 2: 0.50000 0.25000 0.75000 0.12500 0.62500 0.37500 0.87500 0.06250 0.56250 0.31250
Base 3: 0.33333 0.66667 0.11111 0.44444 0.77778 0.22222 0.55556 0.88889 0.03704 0.37037
Base 4: 0.25000 0.50000 0.75000 0.06250 0.31250 0.56250 0.81250 0.12500 0.37500 0.62500
Base 5: 0.20000 0.40000 0.60000 0.80000 0.04000 0.24000 0.44000 0.64000 0.84000 0.08000
Base 6: 0.16667 0.33333 0.50000 0.66667 0.83333 0.02778 0.19444 0.36111 0.52778 0.69444
Base 7: 0.14286 0.28571 0.42857 0.57143 0.71429 0.85714 0.02041 0.16327 0.30612 0.44898
Base 8: 0.12500 0.25000 0.37500 0.50000 0.62500 0.75000 0.87500 0.01563 0.14063 0.26563

Elapsed Time: 1.344 ms.
</pre>


=={{header|EasyLang}}==
<syntaxhighlight lang="text">
func vdc b n .
   s = 1
   while n > 0
      s *= b
      m = n mod b
      v += m / s
      n = n div b
   .
   return v
.
for b = 2 to 5
   write "base " & b & ":"
   for n range0 10
      write " " & vdc b n
   .
   print ""
.
</syntaxhighlight>

{{out}}
<pre>base 2: 0 0.50 0.25 0.75 0.12 0.62 0.38 0.88 0.06 0.56
base 3: 0 0.33 0.67 0.11 0.44 0.78 0.22 0.56 0.89 0.04
base 4: 0 0.25 0.50 0.75 0.06 0.31 0.56 0.81 0.12 0.38
base 5: 0 0.20 0.40 0.60 0.80 0.04 0.24 0.44 0.64 0.84</pre>

=={{header|EDSAC order code}}==
Base 2 only, extra credit not attempted.

EDSAC's fixed-point arithmetic makes this task in base 2 fairly straightforward. If, as usual, a 17-bit integer n is stored as n/(2^16), then to find the n'th term in the van der Corput sequence we just reverse the order of bits after the binary point. E.g. 13 is stored as 0.0000000000001101, so the 13th term is 0.1011000000000000 = 11/16. Similarly for 35-bit numbers. The demo program contains subroutines for both formats.
<syntaxhighlight lang="edsac">
[Van der Corput sequence for Rosetta Code.
 EDSAC solution, Initial Orders 2.]

[Library subroutine M3 - prints header at load time and is then overwritten.
 Here, the last character sets the teleprinter to figures.]
            PFGKIFAFRDLFUFOFE@A6FG@E8FEZPF
            *VAN!DER!CORPUT!SEQUENCE@&#17A*BIT!!!#35A*BIT@&#
            ..PZ [blank tape then re-sync]

[Define load addresses]
            T55K P100F  [V parameter: van der Corput subroutines]
            T51K P64F   [G parameter: print subroutine]
            T47K P400F  [M parameter: main routine]

[Subroutines to return n'th element of van der Corput sequence.
 17-bit version: Call by GV, pass n in 0F (not preserved), result in 4F.
 35-bit version: Call by G1V, pass n in 0D (not preserved), result in 4D.]
            E25K TV GK
            G2@  [jump to 17-bit version]
            G25@ [jump to 35-bit version]
[17-bit version.
 On EDSAC, it's a matter of reversing the bits after the binary point
 To save time, we use a table to reverse the 16 bits in groups of 4.]
      [2]   A3F T24@    [plant return link as usual]
            H5 6@       [set mult reg to 0...01111 binary]
            A55@ T4F    [set marker bit 0...01 in result]
      [7]   A4F L4F T4F [shift result 4 left]
            CF          [acc := next 4 bits of n]
            LD          [shift into address field]
            A58@ T14@   [plant A order to load from table]
     [14]   AF          [{planted) load bits from table]
            A4F         [add to result]
            G22@        [jump out if marker bit has reached sign bit]
            T4F         [update result]
            AF R4F TF   [shift n 4 right]
            E7@         [always loop back]
     [22]   S57@        [done, remove marker bit]
            T4F         [store final result]
     [24]   ZF          [(planted) jump to return to caller]

[35-bit version. Very similar to the 17-bit version, except that
 after reversing 8 groups of 4, there are 2 bits left over,
 which require separate treatment.]
     [25]   A3F T54@    [plant return link as usual]
            H56@        [set mult reg to 0...01111 binary]
            YF L2F      [set marker bit 0...0100 in result]
     [30]   L4F T4D     [shift result 4 left]
            CF LD A58@ T36@ AF A4F T4F [update from table as in 17-bit version]
            ADR4FTD     [shift n 4 right]
            A4D         [load result]
            E30@        [if marker bit hasn't reached sign bit, loop back]
[Last 2 bits]
     [44]   L1FT4D      [shift result 2 right]
            CF LD A58@ T50@ [plant A order as in 17-bit version]
     [50]   AF          [Planted) load bits from table]
            R1F A4F T4F [shift table entry 2 right and add to result]
     [54]   ZF          [(planted) jump to return to caller]
[Constants]
     [55]   PD          [17-bit 1]
     [56]   P7D         [17-bit 15]
     [57]   K4096F      [17-bit 10...0 binary]
     [58]   A59@        [order to load from table{0}]
[Table to reverse group of 4 bits, e.g. table{0010b} = 0100b]
     [59]   PFP4FP2FP6FP1FP5FP3FP7FPDP4DP2DP6DP1DP5DP3DP7D

[Library subroutine P1 to print number in range 0 <= x < 1.
 Caller must print leading '0.' if required. 21 storage locations.]
            E25K TG
            GKA18@U17@S20@T5@H19@PFT5@VDUFOFFFSFL4FTDA5@A2FG6@EFU3FJFM1F

[Main routine]
            E25K TM GK
      [0]   PF PF       [n, 35 bits, must be at even address]
      [2]   PF          [negative count of terms]
      [3]   P10F        [<=== EDIT number of terms, in address field]
      [4]   PD          [17-bit integer 1]
      [5]   MF          [dot (in figures mode)]
      [6]   @F          [carriage return]
      [7]   &F          [line feed]
      [8]   !F          [space character]
      [9]   K4096F      [null character]

[Enter with acc = 0]
     [10]   T#@         [n := 0]
            S3@ T2@     [initialize negative count]
     [13]   A@ TF       [pass 17-bit n in 0F]
     [15]   A15@ GV     [call 17-bit van der Corput routine]
            TD          [clear 0D, including sandwich bit]
            A4F T1F     [extend 17-bit result to 35 bits in 0D]
            O4@ O5@     [print '0.']
     [22]   A22@ GG P5F [print result to 5 decimals]
            O8@ O8@     [print 2 spaces]
            A#@ TD      [pass 35-bit n in 0D]
     [29]   A29@ G1V    [call 35-bit van der Corput routine]
            A4D TD      [pass result in 0D]
            O4@ O5@     [print '0.']
     [35]   A35@ GG P10F [print result to 10 decimals]
            O6@ O7@     [print CR LF]
            A2@ A2F     [inc negative count]
            E48@        [jump out if count = 0]
            T2@         [update count]
            A@ A4@ T@   [inc n]
            E13@        [loop back]
     [48]   O9@         [print null to flush teleprinter buffer]
            ZF          [stop]

            E10Z        [define entry point]
            PF          [acc = 0 on entry]
[end]
</syntaxhighlight>
{{out}}
<pre>
VAN DER CORPUT SEQUENCE
17-BIT   35-BIT
0.00000  0.0000000000
0.50000  0.5000000000
0.25000  0.2500000000
0.75000  0.7500000000
0.12500  0.1250000000
0.62500  0.6250000000
0.37500  0.3750000000
0.87500  0.8750000000
0.06250  0.0625000000
0.56250  0.5625000000
</pre>

=={{header|Ela}}==
<syntaxhighlight lang="ela">open random number list
 
vdc bs n = vdc' 0.0 1.0 n
  where vdc' v d n 
          | n > 0 = vdc' v' d' n'
          | else  = v
          where 
            d' = d * bs
            rem = n % bs
            n' = truncate (n / bs)
            v' = v + rem / d'</syntaxhighlight>

Test (with base 2.0, using non-strict map function on infinite list):

<syntaxhighlight lang="ela">take 10 <| map' (vdc 2.0) [1..]</syntaxhighlight>

{{out}}
<pre>[0.5,0.25,0.75,0.125,0.625,0.375,0.875,0.0625,0.5625,0.3125]</pre>

=={{header|Elixir}}==
{{works with|Elixir|1.1}}
<syntaxhighlight lang="elixir">defmodule Van_der_corput do
  def sequence( n, base \\ 2 ) do
    "0." <> (Integer.to_string(n, base) |> String.reverse )
  end
  
  def float( n, base \\ 2 ) do
    Integer.digits(n, base) |> Enum.reduce(0, fn i,acc -> (i + acc) / base end)
  end
  
  def fraction( n, base \\ 2 ) do
    str = Integer.to_string(n, base) |> String.reverse
    denominator = Enum.reduce(1..String.length(str), 1, fn _,acc -> acc*base end)
    reduction( String.to_integer(str, base), denominator )
  end
  
  defp reduction( 0, _ ), do: "0"
  defp reduction( numerator, denominator ) do
    gcd = gcd( numerator, denominator )
    "#{ div(numerator, gcd) }/#{ div(denominator, gcd) }"
  end
  
  defp gcd( a, 0 ), do: a
  defp gcd( a, b ), do: gcd( b, rem(a, b) )
end

funs = [ {"Float(Base):",     &Van_der_corput.sequence/2},
         {"Float(Decimal):",  &Van_der_corput.float/2   },
         {"Fraction:",        &Van_der_corput.fraction/2} ]
Enum.each(funs, fn {title, fun} ->
  IO.puts title
  Enum.each(2..5, fn base ->
    IO.puts "  Base #{ base }: #{ Enum.map_join(0..9, ", ", &fun.(&1, base)) }"
  end)
end)</syntaxhighlight>

{{out}}
<pre>
Float(Base):
  Base 2: 0.0, 0.1, 0.01, 0.11, 0.001, 0.101, 0.011, 0.111, 0.0001, 0.1001
  Base 3: 0.0, 0.1, 0.2, 0.01, 0.11, 0.21, 0.02, 0.12, 0.22, 0.001
  Base 4: 0.0, 0.1, 0.2, 0.3, 0.01, 0.11, 0.21, 0.31, 0.02, 0.12
  Base 5: 0.0, 0.1, 0.2, 0.3, 0.4, 0.01, 0.11, 0.21, 0.31, 0.41
Float(Decimal):
  Base 2: 0.0, 0.5, 0.25, 0.75, 0.125, 0.625, 0.375, 0.875, 0.0625, 0.5625
  Base 3: 0.0, 0.3333333333333333, 0.6666666666666666, 0.1111111111111111, 0.4444444444444444, 0.7777777777777778, 0.2222222222222222, 0.5555555555555555, 0.8888888888888888, 0.037037037037037035
  Base 4: 0.0, 0.25, 0.5, 0.75, 0.0625, 0.3125, 0.5625, 0.8125, 0.125, 0.375
  Base 5: 0.0, 0.2, 0.4, 0.6, 0.8, 0.04, 0.24, 0.44000000000000006, 0.64, 0.8400000000000001
Fraction:
  Base 2: 0, 1/2, 1/4, 3/4, 1/8, 5/8, 3/8, 7/8, 1/16, 9/16
  Base 3: 0, 1/3, 2/3, 1/9, 4/9, 7/9, 2/9, 5/9, 8/9, 1/27
  Base 4: 0, 1/4, 1/2, 3/4, 1/16, 5/16, 9/16, 13/16, 1/8, 3/8
  Base 5: 0, 1/5, 2/5, 3/5, 4/5, 1/25, 6/25, 11/25, 16/25, 21/25
</pre>

=={{header|Erlang}}==
I liked the bc output-in-same-base, but think this is the way it should look.
<syntaxhighlight lang="erlang">
-module( van_der_corput ).

-export( [sequence/1, sequence/2, task/0] ).

sequence( N ) -> sequence( N, 2 ).

sequence( 0, _Base ) -> 0.0;
sequence( N, Base ) -> erlang:list_to_float( "0." ++ lists:flatten([erlang:integer_to_list(X) || X <- sequence_loop(N, Base)]) ).

task() -> [task(X) || X <- lists:seq(2, 5)].



sequence_loop( 0, _Base ) -> [];
sequence_loop( N, Base ) ->
	New_n = N div Base,
	Digit = N rem Base,
	[Digit | sequence_loop( New_n, Base )].

task( Base ) ->
	io:fwrite( "Base ~p:", [Base] ),
	[io:fwrite( " ~p", [sequence(X, Base)] ) || X <- lists:seq(0, 9)],
	io:fwrite( "~n" ).
</syntaxhighlight>
{{out}}
<pre>
34> van_der_corput:task().
Base 2: 0.0 0.1 0.01 0.11 0.001 0.101 0.011 0.111 0.0001 0.1001
Base 3: 0.0 0.1 0.2 0.01 0.11 0.21 0.02 0.12 0.22 0.001
Base 4: 0.0 0.1 0.2 0.3 0.01 0.11 0.21 0.31 0.02 0.12
Base 5: 0.0 0.1 0.2 0.3 0.4 0.01 0.11 0.21 0.31 0.41
</pre>

=={{header|ERRE}}==
<syntaxhighlight lang="erre">PROGRAM VAN_DER_CORPUT

!
! for rosettacode.org
!

PROCEDURE VDC(N%,B%->RES)
      LOCAL V,S%
      S%=1
      WHILE N%>0 DO
        S%*=B%
        V+=(N% MOD B%)/S%
        N%=N% DIV B%
      END WHILE
      RES=V
END PROCEDURE

BEGIN
      FOR BASE%=2 TO 5 DO
        PRINT("Base";STR$(BASE%);":")
        FOR NUMBER%=0 TO 9 DO
          VDC(NUMBER%,BASE%->RES)
          WRITE("#.##### ";RES;)
        END FOR
        PRINT
      END FOR
END PROGRAM</syntaxhighlight>
{{out}}
<pre>
Base 2:
 0.00000 0.50000 0.25000 0.75000 0.12500 0.62500 0.37500 0.87500 0.06250 0.56250
Base 3:
 0.00000 0.33333 0.66667 0.11111 0.44444 0.77778 0.22222 0.55556 0.88889 0.03704
Base 4:
 0.00000 0.25000 0.50000 0.75000 0.06250 0.31250 0.56250 0.81250 0.12500 0.37500
Base 5:
 0.00000 0.20000 0.40000 0.60000 0.80000 0.04000 0.24000 0.44000 0.64000 0.84000
</pre>

=={{header|Euphoria}}==
{{trans|D}}
<syntaxhighlight lang="euphoria">function vdc(integer n, atom base)
    atom vdc, denom, rem
    vdc = 0
    denom = 1
    while n do
        denom *= base
        rem = remainder(n,base)
        n = floor(n/base)
        vdc += rem / denom
    end while
    return vdc
end function

for i = 2 to 5 do
    printf(1,"Base %d\n",i)
    for j = 0 to 9 do
        printf(1,"%g ",vdc(j,i))
    end for
    puts(1,"\n\n")
end for</syntaxhighlight>

{{out}}
<pre>Base 2
0 0.5 0.25 0.75 0.125 0.625 0.375 0.875 0.0625 0.5625

Base 3
0 0.333333 0.666667 0.111111 0.444444 0.777778 0.222222 0.555556 0.888889 0.037037

Base 4
0 0.25 0.5 0.75 0.0625 0.3125 0.5625 0.8125 0.125 0.375

Base 5
0 0.2 0.4 0.6 0.8 0.04 0.24 0.44 0.64 0.84

</pre>

=={{header|F_Sharp|F#}}==
<syntaxhighlight lang="fsharp">open System

let vdc n b =
    let rec loop n denom acc =
        if n > 0l then
            let m, remainder = Math.DivRem(n, b)
            loop m (denom * b) (acc + (float remainder) / (float (denom * b)))
        else acc
    loop n 1 0.0
     

[<EntryPoint>]
let main argv =
    printfn "%A" [ for n in 0 .. 9 -> (vdc n 2) ]
    printfn "%A" [ for n in 0 .. 9 -> (vdc n 5) ]
    0</syntaxhighlight>
{{out}}
<pre>[0.0; 0.5; 0.25; 0.75; 0.125; 0.625; 0.375; 0.875; 0.0625; 0.5625]
[0.0; 0.2; 0.4; 0.6; 0.8; 0.04; 0.24; 0.44; 0.64; 0.84]</pre>

=={{header|Factor}}==
{{works with|Factor|0.98}}
<syntaxhighlight lang="factor">USING: formatting fry io kernel math math.functions math.parser
math.ranges sequences ;
IN: rosetta-code.van-der-corput

: vdc ( n base -- x )
    [ >base string>digits <reversed> ]
    [ nip '[ 1 + neg _ swap ^ * ] ] 2bi map-index sum ;

: vdc-demo ( -- )
    2 5 [a,b] [
        dup "Base %d: " printf 10 <iota>
        [ swap vdc "%-5u " printf ] with each nl
    ] each ;

MAIN: vdc-demo</syntaxhighlight>
{{out}}
<pre>
Base 2: 0     1/2   1/4   3/4   1/8   5/8   3/8   7/8   1/16  9/16  
Base 3: 0     1/3   2/3   1/9   4/9   7/9   2/9   5/9   8/9   1/27  
Base 4: 0     1/4   1/2   3/4   1/16  5/16  9/16  13/16 1/8   3/8   
Base 5: 0     1/5   2/5   3/5   4/5   1/25  6/25  11/25 16/25 21/25 
</pre>

=={{header|Forth}}==
<syntaxhighlight lang="forth">: fvdc ( base n -- f )
  0e 1e ( F: vdc denominator )
  begin dup while
    over s>d d>f f*
    over /mod  ( base rem n )
    swap s>d d>f fover f/
    frot f+ fswap
  repeat 2drop fdrop ;

: test  10 0 do 2 i fvdc cr f. loop ;</syntaxhighlight>

{{out}}
<pre>test
0.
0.5
0.25
0.75
0.125
0.625
0.375
0.875
0.0625
0.5625  ok</pre>

=={{header|Fortran}}==
This is straightforward once one remembers that the obvious scheme for extracting digits from a number produces them from the low-order end to the high-order end. This reversal is normally annoying, but here a "reflection" ''is'' desired. The source is old-style, except for using F90's ability to have a function (or subroutine) name appear on its END statement with this checked by the compiler. Because the MODULE protocol introduced by F90 is not bothered with, the type of the function has to be declared in all routines invoking it if the default type based on the form of the name does not suffice. Single precision suffices, but the F90 compiler moans that the type of the function itself has not been explicitly declared. Ah well. <syntaxhighlight lang="fortran">      FUNCTION VDC(N,BASE)	!Calculates a Van der Corput number...
Converts 1234 in decimal to 4321 in V, and P = 10000.
       INTEGER N	!For this integer,
       INTEGER BASE	!In this base.
       INTEGER I	!A copy of N that can be damaged.
       INTEGER P	!Successive powers of BASE.
       INTEGER V	!Accumulates digits.
        P = 1		! = BASE**0
        V = 0		!Start with no digits, as if N = 0.
        I = N		!Here we go.
        DO WHILE (I .NE. 0)	!While something remains,
          V = V*BASE + MOD(I,BASE)	!Extract its low-order digit.
          I = I/BASE			!Reduce it by a power.
          P = P*BASE			!And track the power.
        END DO			!Thus extract the digits in reverse order: right-to-left.
        VDC = V/FLOAT(P)	!The power is one above the highest digit.
      END FUNCTION VDC	!Numerology is weird.

      PROGRAM POKE
      INTEGER FIRST,LAST	!Might as well document some constants.
      PARAMETER (FIRST = 0,LAST = 9)	!Thus, the first ten values.
      INTEGER I,BASE		!Steppers.
      REAL VDC			!Stop the compiler moaning about undeclared items.

      WRITE (6,1) FIRST,LAST,(I, I = FIRST,LAST)	!Announce.
    1 FORMAT ("Calculates values ",I0," to ",I0," of the ",
     1 "Van der Corput sequence, in various bases."/
     2 "Base",666I9)

      DO BASE = 2,13	!A selection of bases.
        WRITE (6,2) BASE,(VDC(I,BASE), I = FIRST,LAST)	!Show the specified span.
    2   FORMAT (I4,666F9.6)	!Aligns with FORMAT 1.
      END DO		!On to the next base.

      END</syntaxhighlight>
Output: six-digit precision is about the most that single precision offers.
<pre>
Calculates values 0 to 9 of the Van der Corput sequence, in various bases.
Base        0        1        2        3        4        5        6        7        8        9
   2 0.000000 0.500000 0.250000 0.750000 0.125000 0.625000 0.375000 0.875000 0.062500 0.562500
   3 0.000000 0.333333 0.666667 0.111111 0.444444 0.777778 0.222222 0.555556 0.888889 0.037037
   4 0.000000 0.250000 0.500000 0.750000 0.062500 0.312500 0.562500 0.812500 0.125000 0.375000
   5 0.000000 0.200000 0.400000 0.600000 0.800000 0.040000 0.240000 0.440000 0.640000 0.840000
   6 0.000000 0.166667 0.333333 0.500000 0.666667 0.833333 0.027778 0.194444 0.361111 0.527778
   7 0.000000 0.142857 0.285714 0.428571 0.571429 0.714286 0.857143 0.020408 0.163265 0.306122
   8 0.000000 0.125000 0.250000 0.375000 0.500000 0.625000 0.750000 0.875000 0.015625 0.140625
   9 0.000000 0.111111 0.222222 0.333333 0.444444 0.555556 0.666667 0.777778 0.888889 0.012346
  10 0.000000 0.100000 0.200000 0.300000 0.400000 0.500000 0.600000 0.700000 0.800000 0.900000
  11 0.000000 0.090909 0.181818 0.272727 0.363636 0.454545 0.545455 0.636364 0.727273 0.818182
  12 0.000000 0.083333 0.166667 0.250000 0.333333 0.416667 0.500000 0.583333 0.666667 0.750000
  13 0.000000 0.076923 0.153846 0.230769 0.307692 0.384615 0.461538 0.538462 0.615385 0.692308
</pre>

=={{header|FreeBASIC}}==
<syntaxhighlight lang="freebasic">' version 03-12-2016
' compile with: fbc -s console

Function num_base(number As ULongInt, _base_ As UInteger) As String

    If _base_ > 9 Then
        Print "base not handled by function"
        Sleep 5000
        Return ""
    End If

    Dim As ULongInt n
    Dim As String ans

    While number <> 0
        n = number Mod _base_
        ans = Str(n) + ans
        number = number \ _base_
    Wend
    
    If ans = "" Then ans = "0"
    
    Return "." + ans

End Function

' ------=< MAIN >=------

Dim As ULong k, l
For k = 2 To 5
    Print "Base = "; k
    For l = 0 To 12
        Print left(num_base(l, k) + "      ",6);
    Next
    Print : print
Next

' empty keyboard buffer
While Inkey <> "" : Wend
Print : Print "hit any key to end program"
Sleep
End</syntaxhighlight>
{{out}}
<pre>Base = 2
.0    .1    .10   .11   .100  .101  .110  .111  .1000 .1001 .1010 .1011 .1100 

Base = 3
.0    .1    .2    .10   .11   .12   .20   .21   .22   .100  .101  .102  .110  

Base = 4
.0    .1    .2    .3    .10   .11   .12   .13   .20   .21   .22   .23   .30   

Base = 5
.0    .1    .2    .3    .4    .10   .11   .12   .13   .14   .20   .21   .22</pre>

=={{header|Fōrmulæ}}==

{{FormulaeEntry|page=https://formulae.org/?script=examples/Van_der_Corput_sequence}}

'''Solution'''

[[File:Fōrmulæ - Van der Corput sequence 01.png]]

'''Case 1. Van der Corput sequences for numbers 0 .. 25, in bases 2 to 10'''

[[File:Fōrmulæ - Van der Corput sequence 02.png]]

[[File:Fōrmulæ - Van der Corput sequence 03.png]]

'''Case 2. Numerical values'''

[[File:Fōrmulæ - Van der Corput sequence 04.png]]

[[File:Fōrmulæ - Van der Corput sequence 05.png]]

'''Case 3. A plot of Van der Corput sequence for values 0 to 500, in base 10'''

[[File:Fōrmulæ - Van der Corput sequence 06.png]]

[[File:Fōrmulæ - Van der Corput sequence 07.png]]

=={{header|Go}}==
<syntaxhighlight lang="go">package main

import "fmt"

func v2(n uint) (r float64) {
    p := .5
    for n > 0 {
        if n&1 == 1 {
            r += p
        }
        p *= .5
        n >>= 1
    }
    return
}

func newV(base uint) func(uint) float64 {
    invb := 1 / float64(base)
    return func(n uint) (r float64) {
        p := invb
        for n > 0 {
            r += p * float64(n%base)
            p *= invb
            n /= base
        }
        return
    }
}

func main() {
    fmt.Println("Base 2:")
    for i := uint(0); i < 10; i++ {
        fmt.Println(i, v2(i))
    }
    fmt.Println("Base 3:")
    v3 := newV(3)
    for i := uint(0); i < 10; i++ {
        fmt.Println(i, v3(i))
    }
}</syntaxhighlight>
{{out}}
<pre>
Base 2:
0 0
1 0.5
2 0.25
3 0.75
4 0.125
5 0.625
6 0.375
7 0.875
8 0.0625
9 0.5625
Base 3:
0 0
1 0.3333333333333333
2 0.6666666666666666
3 0.1111111111111111
4 0.4444444444444444
5 0.7777777777777777
6 0.2222222222222222
7 0.5555555555555556
8 0.8888888888888888
9 0.037037037037037035
</pre>

=={{header|Haskell}}==
The function <tt>vdc</tt> returns the n<sup>th</sup> exact, arbitrary precision van der Corput number for any base &ge; 2 and any n.  (A reasonable value is returned for negative values of n.)
<syntaxhighlight lang="haskell">import Data.Ratio (Rational(..), (%), numerator, denominator)
import Data.List (unfoldr)
import Text.Printf (printf)
 
-- A wrapper type for Rationals to make them look nicer when we print them.
newtype Rat =
  Rat Rational
 
instance Show Rat where
  show (Rat n) = show (numerator n) <> ('/' : show (denominator n))
 
-- Convert a list of base b digits to its corresponding number.  
-- We assume the digits are valid base b numbers and that 
-- their order is from least to most significant.  
digitsToNum :: Integer -> [Integer] -> Integer
digitsToNum b = foldr1 (\d acc -> b * acc + d)
 
-- Convert a number to the list of its base b digits.  
-- The order will be from least to most significant.
numToDigits :: Integer -> Integer -> [Integer]
numToDigits _ 0 = [0]
numToDigits b n = unfoldr step n
  where
    step 0 = Nothing
    step m =
      let (q, r) = m `quotRem` b
      in Just (r, q)
 
-- Return the n'th element in the base b van der Corput sequence.  
-- The base must be ≥ 2.
vdc :: Integer -> Integer -> Rat
vdc b n
  | b < 2 = error "vdc: base must be ≥ 2"
  | otherwise =
    let ds = reverse $ numToDigits b n
    in Rat (digitsToNum b ds % b ^ length ds)
 
-- Each base followed by a specified range of van der Corput numbers.
printVdcRanges :: ([Integer], [Integer]) -> IO ()
printVdcRanges (bases, nums) =
  mapM_
    putStrLn
    [ printf "Base %d:" b <> concatMap (printf " %5s" . show) rs
    | b <- bases 
    , let rs = map (vdc b) nums ]
 
main :: IO ()
main = do
  -- Small bases:
  printVdcRanges ([2, 3, 4, 5], [0 .. 9])
  putStrLn []
 
  -- Base 123:
  printVdcRanges ([123], [50,100 .. 300])</syntaxhighlight>
{{out}}
<pre>Base 2:   0/1   1/2   1/4   3/4   1/8   5/8   3/8   7/8  1/16  9/16
Base 3:   0/1   1/3   2/3   1/9   4/9   7/9   2/9   5/9   8/9  1/27
Base 4:   0/1   1/4   1/2   3/4  1/16  5/16  9/16 13/16   1/8   3/8
Base 5:   0/1   1/5   2/5   3/5   4/5  1/25  6/25 11/25 16/25 21/25

Base 123: 50/123 100/123 3322/15129 9472/15129 494/15129 6644/15129</pre>

=={{header|Icon}} and {{header|Unicon}}==
The following solution works in both Icon and Unicon:
<syntaxhighlight lang="unicon">procedure main(A)
    base := integer(get(A)) | 2
    every writes(round(vdc(0 to 9,base),10)," ")
    write()
end

procedure vdc(n, base)
    e := 1.0
    x := 0.0
    while x +:= 1(((0 < n) % base) / (e *:= base), n /:= base)
    return x
end

procedure round(n,d)
    places := 10 ^ d
    return real(integer(n*places + 0.5)) / places
end</syntaxhighlight>

and a sample run is:

<pre>->vdc
0.0 0.5 0.25 0.75 0.125 0.625 0.375 0.875 0.0625 0.5625 
->vdc 3
0.0 0.3333333333 0.6666666667 0.1111111111 0.4444444444 0.7777777778 0.2222222222 0.5555555556 0.8888888889 0.037037037 
->vdc 5
0.0 0.2 0.4 0.6 0.8 0.04 0.24 0.44 0.64 0.84 
->vdc 123
0.0 0.0081300813 0.0162601626 0.0243902439 0.0325203252 0.0406504065 0.0487804878 0.0569105691 0.0650406504 0.07317073170000001 
-></pre>

An alternate, Unicon-specific implementation of <tt>vdc</tt> patterned after the functional Raku
solution is:
<syntaxhighlight lang="unicon">procedure vdc(n, base)
    s1 := create |((0 < 1(.n, n /:= base)) % base)
    s2 := create 2(e := 1.0, |(e *:= base))
    every (result := 0) +:= |s1() / s2()
    return result
end</syntaxhighlight>
It produces the same output as shown above.

=={{header|J}}==
'''Solution:'''
<syntaxhighlight lang="j">vdc=: ([ %~ %@[ #. #.inv)"0 _</syntaxhighlight>
'''Examples:'''
<syntaxhighlight lang="j">   2 vdc i.10                NB. 1st 10 nums of Van der Corput sequence in base 2
0 0.5 0.25 0.75 0.125 0.625 0.375 0.875 0.0625 0.5625
   2x vdc i.10               NB. as above but using rational nums
0 1r2 1r4 3r4 1r8 5r8 3r8 7r8 1r16 9r16
   2 3 4 5x vdc i.10         NB. 1st 10 nums of Van der Corput sequence in bases 2 3 4 5
0 1r2 1r4 3r4  1r8  5r8  3r8   7r8  1r16  9r16
0 1r3 2r3 1r9  4r9  7r9  2r9   5r9   8r9  1r27
0 1r4 1r2 3r4 1r16 5r16 9r16 13r16   1r8   3r8
0 1r5 2r5 3r5  4r5 1r25 6r25 11r25 16r25 21r25</syntaxhighlight>

In other words: use the left argument as the "base" to structure the sequence numbers into digits ("base 2", etc.).  Then use the reciprocal of the left argument as the "base" to re-represent this sequence and divide that result by the left argument to get the Van der Corput sequence number.

=={{header|Java}}==
{{trans|Raku}}
Using <code>(denom *= 2)</code> as the denominator is not a recommended way of doing things since it is not clear when the multiplication and assignment happen. 
Comparing this to the "++" operator, it looks like it should do the doubling and assignment second. Comparing it to the "++" operator used as a preincrement operator, it looks like it should do the doubling and assignment first. 
Comparing it to the behavior of parentheses, it looks like it should do the doubling and assignment first. Luckily for us, it works the same in Java as in Raku (doubling and assignment first). It was kept the Raku way to help with the comparison. 
Normally, we would initialize denom to 2 (since that is the denominator of the leftmost digit), use it alone in the vdc sum, and then double it after.
<syntaxhighlight lang="java">public class VanDerCorput{
	public static double vdc(int n){
		double vdc = 0;
		int denom = 1;
		while(n != 0){
			vdc += n % 2.0 / (denom *= 2);
			n /= 2;
		}
		return vdc;
	}
	
	public static void main(String[] args){
		for(int i = 0; i <= 10; i++){
			System.out.println(vdc(i));
		}
	}
}</syntaxhighlight>
{{out}}
<pre>0.0
0.5
0.25
0.75
0.125
0.625
0.375
0.875
0.0625
0.5625
0.3125</pre>

=={{header|jq}}== 
{{ works with|jq|1.4}}

The neat thing about the following implementation of vdc(base) is that it shows how the task can be accomplished in two separate steps without the need to construct an intermediate array.
<syntaxhighlight lang="jq"># vdc(base) converts an input decimal integer to a decimal number based on the van der
# Corput sequence using base 'base', e.g. (4 | vdc(2)) is 0.125.
#
def vdc(base):

  # The helper function converts a stream of residuals to a decimal,
  # e.g. if base is 2, then decimalize( (0,0,1) ) yields 0.125
  def decimalize(stream):
    reduce stream as $d   # state: [accumulator, power]
      ( [0, 1/base];
       .[1] as $power | [ .[0] + ($d * $power), $power / base] )
    | .[0];

  if . == 0 then 0
  else decimalize(recurse( if . == 0 then empty else ./base | floor end ) % base)
  end ;</syntaxhighlight>
'''Example:'''
<syntaxhighlight lang="jq">def round(n):
  (if . < 0 then -1 else 1 end) as $s
  | $s*10*.*n | if (floor%10)>4 then (.+5) else . end | ./10 | floor/n | .*$s;

range(2;6) | . as $base | "Base \(.): \( [ range(0;11) | vdc($base)|round(1000) ] )"</syntaxhighlight>
{{out}}
<syntaxhighlight lang="sh">
$ jq -n -f -c -r van_der_corput_sequence.jq
Base 2: [0,0.5,0.25,0.75,0.125,0.625,0.375,0.875,0.063,0.563,0.313]
Base 3: [0,0.333,0.667,0.111,0.444,0.778,0.222,0.556,0.889,0.037,0.37]
Base 4: [0,0.25,0.5,0.75,0.063,0.313,0.563,0.813,0.125,0.375,0.625]
Base 5: [0,0.2,0.4,0.6,0.8,0.04,0.24,0.44,0.64,0.84,0.08]</syntaxhighlight>

=={{header|Julia}}==
<syntaxhighlight lang="julia">using Printf

vandercorput(num::Integer, base::Integer) = sum(d * Float64(base) ^ -ex for (ex, d) in enumerate(digits(num, base = base)))

for base in 2:9
    @printf("%10s %i:", "Base", base)
    for num in 0:9 @printf("%7.3f", vandercorput(num, base)) end
    println(" [...]")
end</syntaxhighlight>

{{out}}
<pre>      Base 2:  0.000  0.500  0.250  0.750  0.125  0.625  0.375  0.875  0.063  0.563...
      Base 3:  0.000  0.333  0.667  0.111  0.444  0.778  0.222  0.556  0.889  0.037...
      Base 4:  0.000  0.250  0.500  0.750  0.063  0.313  0.563  0.813  0.125  0.375...
      Base 5:  0.000  0.200  0.400  0.600  0.800  0.040  0.240  0.440  0.640  0.840...
      Base 6:  0.000  0.167  0.333  0.500  0.667  0.833  0.028  0.194  0.361  0.528...
      Base 7:  0.000  0.143  0.286  0.429  0.571  0.714  0.857  0.020  0.163  0.306...
      Base 8:  0.000  0.125  0.250  0.375  0.500  0.625  0.750  0.875  0.016  0.141...
      Base 9:  0.000  0.111  0.222  0.333  0.444  0.556  0.667  0.778  0.889  0.012...
</pre>

=={{header|Kotlin}}==
{{trans|C}}
<syntaxhighlight lang="scala">// version 1.1.2

data class Rational(val num: Int, val denom: Int)

fun vdc(n: Int, base: Int): Rational {
    var p = 0
    var q = 1
    var nn = n
    while (nn != 0) {
        p = p * base + nn % base
        q *= base
        nn /= base
    }
    val num = p
    val denom = q
    while (p != 0) {
        nn = p
        p = q % p
        q = nn
    }
    return Rational(num / q, denom / q)
}

fun main(args: Array<String>) {
    for (b in 2..5) {
        print("base $b:")
        for (i in 0..9) {
            val(num, denom) = vdc(i, b)
            if (num != 0) print("  $num/$denom")
            else print("  0")
        }
        println()
    }
}</syntaxhighlight>

{{out}}
<pre>
base 2:  0  1/2  1/4  3/4  1/8  5/8  3/8  7/8  1/16  9/16
base 3:  0  1/3  2/3  1/9  4/9  7/9  2/9  5/9  8/9  1/27
base 4:  0  1/4  1/2  3/4  1/16  5/16  9/16  13/16  1/8  3/8
base 5:  0  1/5  2/5  3/5  4/5  1/25  6/25  11/25  16/25  21/25
</pre>

=={{header|Lua}}==
<syntaxhighlight lang="lua">function vdc(n, base)
    local digits = {}
    while n ~= 0 do
        local m = math.floor(n / base)
        table.insert(digits, n - m * base)
        n = m
    end
    m = 0
    for p, d in pairs(digits) do
        m = m + math.pow(base, -p) * d
    end
    return m
end</syntaxhighlight>

Alternative version, prints the sequence elements as fractions - based on the Algol 68 sample.
<syntaxhighlight lang="lua">
function vdc( nth, base ) -- returns the numerator & denominator of the sequence element n in base
    local p, q, n = 0, 1, nth
    while n ~= 0 do
        p = p * base
        p = p + n % base;
        q = q * base;
        n = math.floor( n / base )
    end
    local num, denom = p, q;
    -- reduce the numerator and denominator by their gcd
    while p ~= 0 do
        n = p
        p = q % p
        q = n 
    end
    num   = math.floor( num   / q )
    denom = math.floor( denom / q )
    return num, denom
end
for b = 2,5 do
    io.write( "base ", b, ": " )
    for n = 0,9 do
        local num, denom = vdc( n, b )
        io.write( " ", num ) if num ~= 0 then io.write( "/", denom ) end
    end
    io.write( "\n" )
end
</syntaxhighlight>

{{out}}
<pre>
base 2:  0 1/2 1/4 3/4 1/8 5/8 3/8 7/8 1/16 9/16
base 3:  0 1/3 2/3 1/9 4/9 7/9 2/9 5/9 8/9 1/27
base 4:  0 1/4 1/2 3/4 1/16 5/16 9/16 13/16 1/8 3/8
base 5:  0 1/5 2/5 3/5 4/5 1/25 6/25 11/25 16/25 21/25
</pre>

=={{header|Maple}}==

<syntaxhighlight lang="maple">Halton:=proc(n,b)
  local i:=n,k:=1,s:=0,r;
  while i>0 do
    k/=b;
    i:=iquo(i,b,'r');
    s+=k*r
  od;
  s
end;

map(Halton,[$1..10],2);
# [1/2, 1/4, 3/4, 1/8, 5/8, 3/8, 7/8, 1/16, 9/16, 5/16]

map(Halton,[$1..10],3);
# [1/3, 2/3, 1/9, 4/9, 7/9, 2/9, 5/9, 8/9, 1/27, 10/27]

map(Halton,[$1..10],4);
# [1/4, 1/2, 3/4, 1/16, 5/16, 9/16, 13/16, 1/8, 3/8, 5/8]

map(Halton,[$1..10],5);
[1/5, 2/5, 3/5, 4/5, 1/25, 6/25, 11/25, 16/25, 21/25, 2/25]</syntaxhighlight>

=={{header|Mathematica}}/{{header|Wolfram Language}}==
<syntaxhighlight lang="mathematica">VanDerCorput[n_,base_:2]:=Table[
  FromDigits[{Reverse[IntegerDigits[k,base]],0},base],
{k,n}]
VanDerCorput[10,2]
VanDerCorput[10,3]
VanDerCorput[10,4]
VanDerCorput[10,5]
</syntaxhighlight>
{{out}}
<pre>{1/2,1/4,3/4,1/8,5/8,3/8,7/8,1/16,9/16,5/16}
{1/3, 2/3, 1/9, 4/9, 7/9, 2/9, 5/9, 8/9, 1/27, 10/27}
{1/4, 1/2, 3/4, 1/16, 5/16, 9/16, 13/16, 1/8, 3/8, 5/8}
{1/5, 2/5, 3/5, 4/5, 1/25, 6/25, 11/25, 16/25, 21/25, 2/25}</pre>

=={{header|MATLAB}} / {{header|Octave}}== 

<syntaxhighlight lang="matlab">    function x = corput (n)
    b = dec2bin(1:n)-'0';   % generate sequence of binary numbers from 1 to n
    l = size(b,2);          % get number of binary digits 
    w = (1:l)-l-1;          % 2.^w are the weights
    x = b * ( 2.^w');       % matrix times vector multiplication for 
    end;  </syntaxhighlight>

{{out}}
<pre> corput(10)
 ans =

   0.500000
   0.250000
   0.750000
   0.125000
   0.625000
   0.375000
   0.875000
   0.062500
   0.562500
   0.312500</pre>

=={{header|Maxima}}== 

Define two helper functions
<syntaxhighlight lang="maxima">/* convert a decimal integer to a list of digits in base `base' */
dec2digits(d, base):= block([digits: []],
  while (d>0) do block([newdi: mod(d, base)],
    digits: cons(newdi, digits),
    d: round( (d - newdi) / base)),
  digits)$

dec2digits(123, 10);
/* [1, 2, 3] */
dec2digits(  8,  2);
/* [1, 0, 0, 0] */</syntaxhighlight>

<syntaxhighlight lang="maxima">/* convert a list of digits in base `base' to a decimal integer */
digits2dec(l, base):= block([s: 0, po: 1],
  for di in reverse(l) do (s: di*po + s, po: po*base),
  s)$

digits2dec([1, 2, 3], 10);
/* 123 */
digits2dec([1, 0, 0, 0], 2);
/* 8 */</syntaxhighlight>

The main function
<syntaxhighlight lang="maxima">vdc(n, base):= makelist(
  digits2dec(
    dec2digits(k, base),
    1/base) / base,
  k, n);

vdc(10, 2);
/*
                        1  1  3  1  5  3  7  1   9   5
(%o123)                [-, -, -, -, -, -, -, --, --, --]
                        2  4  4  8  8  8  8  16  16  16
*/

vdc(10, 5);
/*
                      1  2  3  4  1   6   11  16  21  2
(%o124)              [-, -, -, -, --, --, --, --, --, --]
                      5  5  5  5  25  25  25  25  25  25
*/</syntaxhighlight>           

<tt>digits2dec</tt> can by used with symbols to produce the same example as in
the task description
<syntaxhighlight lang="maxima">
/* 11 in decimal is */
digits: digits2dec([box(1), box(0), box(1), box(1)], box(2));
aux: expand(digits2dec(digits, 1/base) / base)$
simp: false$
/* reflected this would become ... */
subst(box(2), base, aux);
simp: true$

/*

                         3          2
                      """  """   """  """   """ """   """
(%o126)               "2"  "1" + "2"  "0" + "2" "1" + "1"
                      """  """   """  """   """ """   """

                      - 4          - 3          - 2          - 1
               """ """      """ """      """ """      """ """
(%o129)        "1" "2"    + "0" "2"    + "1" "2"    + "1" "2"
               """ """      """ """      """ """      """ """

*/</syntaxhighlight>

=={{header|Modula-2}}==
<syntaxhighlight lang="modula2">MODULE Sequence;
FROM FormatString IMPORT FormatString;
FROM Terminal IMPORT WriteString,WriteLn,ReadChar;

PROCEDURE vc(n,base : INTEGER; VAR num,denom : INTEGER);
VAR p,q : INTEGER;
BEGIN
    p := 0;
    q := 1;

    WHILE n#0 DO
        p := p * base + (n MOD base);
        q := q * base;
        n := n DIV base
    END;

    num := p;
    denom := q;

    WHILE p#0 DO
        n := p;
        p := q MOD p;
        q := n
    END;

    num := num DIV q;
    denom := denom DIV q
END vc;

VAR
    buf : ARRAY[0..31] OF CHAR;
    d,n,i,b : INTEGER;
BEGIN
    FOR b:=2 TO 5 DO
        FormatString("base %i:", buf, b);
        WriteString(buf);
        FOR i:=0 TO 9 DO
            vc(i,b,n,d);
            IF n#0 THEN
                FormatString("  %i/%i", buf, n, d);
                WriteString(buf)
            ELSE
                WriteString("  0")
            END
        END;
        WriteLn
    END;

    ReadChar
END Sequence.</syntaxhighlight>

=={{header|Nim}}==
Using the “rationals” module of the standard library.
<syntaxhighlight lang="nim">import rationals, strutils, sugar

type Fract = Rational[int]

proc corput(n: int; base: Positive): Fract =
  result = 0.toRational
  var b = 1 // base
  var n = n
  while n != 0:
    result += n mod base * b
    n = n div base
    b /= base

for base in 2..5:
  let list = collect(newSeq, for n in 1..10: corput(n, base))
  echo "Base $#: ".format(base), list.join(" ")</syntaxhighlight>

{{out}}
<pre>Base 2: 1/2 1/4 3/4 1/8 5/8 3/8 7/8 1/16 9/16 5/16
Base 3: 1/3 2/3 1/9 4/9 7/9 2/9 5/9 8/9 1/27 10/27
Base 4: 1/4 1/2 3/4 1/16 5/16 9/16 13/16 1/8 3/8 5/8
Base 5: 1/5 2/5 3/5 4/5 1/25 6/25 11/25 16/25 21/25 2/25</pre>

=={{header|PARI/GP}}==
<syntaxhighlight lang="parigp">VdC(n)=n=binary(n);sum(i=1,#n,if(n[i],1.>>(#n+1-i)));
VdC(n)=sum(i=1,#binary(n),if(bittest(n,i-1),1.>>i)); \\ Alternate approach
vector(10,n,VdC(n))</syntaxhighlight>
{{out}}
<pre>[0.500000000, 0.250000000, 0.750000000, 0.125000000, 0.625000000, 0.375000000, 0.875000000, 0.0625000000, 0.562500000, 0.312500000]</pre>

=={{header|Pascal}}==
Tested with Free Pascal 
<syntaxhighlight lang="pascal">Program VanDerCorput;
{$IFDEF FPC}
  {$MODE DELPHI}
{$ELSE}
  {$APPTYPE CONSOLE}
{$ENDIF}

type
  tvdrCallback = procedure (nom,denom: NativeInt);

{ Base=2
function rev2(n,Pot:NativeUint):NativeUint;
var
  r : Nativeint;
begin
  r := 0;
  while Pot > 0 do
  Begin
    r := r shl 1 OR (n AND 1);
    n := n shr 1;
    dec(Pot);
  end;
  rev2 := r;
end;
}

function reverse(n,base,Pot:NativeUint):NativeUint;
var
  r,c : Nativeint;
begin
  r := 0;
//No need to test n> 0 in this special case, n starting in upper half
  while Pot > 0 do
  Begin
    c := n div base;
    r := n+(r-c)*base;
    n := c;
    dec(Pot);
  end;
  reverse := r;
end;

procedure VanDerCorput(base,count:NativeUint;f:tvdrCallback);
//calculates count nominater and denominater of Van der Corput sequence
// to base 
var
 Pot,
 denom,nom,
 i : NativeUint;
Begin
  denom := 1;
  Pot := 0;
  while count > 0 do
  Begin
    IF Pot = 0 then
      f(0,1);
    //start in upper half
    i := denom;
    inc(Pot);
    denom := denom *base;

    repeat
      nom := reverse(i,base,Pot);
      IF count > 0 then
        f(nom,denom)
      else
        break;
      inc(i);
      dec(count);
    until i >= denom;
  end;
end;

procedure vdrOutPut(nom,denom: NativeInt);
Begin
  write(nom,'/',denom,'  ');
end;

var
 i : NativeUint;
Begin
  For i := 2 to 5 do
  Begin
    write(' Base ',i:2,' :');
    VanDerCorput(i,9,@vdrOutPut);
    writeln;
  end;
end.
</syntaxhighlight>
;output:
<pre> Base  2 :0/1  1/2  1/4  3/4  1/8  5/8  3/8  7/8  1/16  9/16  
 Base  3 :0/1  1/3  2/3  1/9  4/9  7/9  2/9  5/9  8/9  1/27  
 Base  4 :0/1  1/4  2/4  3/4  1/16  5/16  9/16  13/16  2/16  6/16  
 Base  5 :0/1  1/5  2/5  3/5  4/5  1/25  6/25  11/25  16/25  21/25</pre>

=={{header|Perl}}==
{{trans|Raku}}
<syntaxhighlight lang="perl">sub vdc {
    my @value = shift;
    my $base = shift // 2;
    use integer;
    push @value, $value[-1] / $base while $value[-1] > 0;
    my ($x, $sum) = (1, 0);
    no integer;
    $sum += ($_ % $base) / ($x *= $base) for @value;
    return $sum;
}

for my $base ( 2 .. 5 ) {
    print "base $base: ", join ' ', map { vdc($_, $base) } 0 .. 10;
    print "\n";
}</syntaxhighlight>

=={{header|Phix}}==
Not entirely sure what to print, so decided to print in three different ways.<br>
It struck me straightaway that the VdC of say 123 is 321/1000, which seems trivial in any base or desired format.
<!--<syntaxhighlight lang="phix">(phixonline)-->
 <span style="color: #008080;">enum</span> <span style="color: #000000;">BASE</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">FRAC</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">DECIMAL</span>
 <span style="color: #008080;">constant</span> <span style="color: #000000;">DESC</span> <span style="color: #0000FF;">=</span> <span style="color: #0000FF;">{</span><span style="color: #008000;">"Base"</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"Fraction"</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"Decimal"</span><span style="color: #0000FF;">}</span>
  
 <span style="color: #008080;">function</span> <span style="color: #000000;">vdc</span><span style="color: #0000FF;">(</span><span style="color: #004080;">integer</span> <span style="color: #000000;">n</span><span style="color: #0000FF;">,</span> <span style="color: #004080;">atom</span> <span style="color: #000000;">base</span><span style="color: #0000FF;">,</span> <span style="color: #004080;">integer</span> <span style="color: #000000;">flag</span><span style="color: #0000FF;">)</span>
 <span style="color: #004080;">object</span> <span style="color: #000000;">res</span> <span style="color: #0000FF;">=</span> <span style="color: #008000;">""</span>
 <span style="color: #004080;">atom</span> <span style="color: #000000;">num</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">0</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">denom</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">1</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">digit</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">g</span>
     <span style="color: #008080;">while</span> <span style="color: #000000;">n</span> <span style="color: #008080;">do</span>
         <span style="color: #000000;">denom</span> <span style="color: #0000FF;">*=</span> <span style="color: #000000;">base</span>
         <span style="color: #000000;">digit</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">remainder</span><span style="color: #0000FF;">(</span><span style="color: #000000;">n</span><span style="color: #0000FF;">,</span><span style="color: #000000;">base</span><span style="color: #0000FF;">)</span>
         <span style="color: #000000;">n</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">floor</span><span style="color: #0000FF;">(</span><span style="color: #000000;">n</span><span style="color: #0000FF;">/</span><span style="color: #000000;">base</span><span style="color: #0000FF;">)</span>
         <span style="color: #008080;">if</span> <span style="color: #000000;">flag</span><span style="color: #0000FF;">=</span><span style="color: #000000;">BASE</span> <span style="color: #008080;">then</span>
             <span style="color: #000000;">res</span> <span style="color: #0000FF;">&=</span> <span style="color: #000000;">digit</span><span style="color: #0000FF;">+</span><span style="color: #008000;">'0'</span>
         <span style="color: #008080;">else</span>
             <span style="color: #000000;">num</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">num</span><span style="color: #0000FF;">*</span><span style="color: #000000;">base</span><span style="color: #0000FF;">+</span><span style="color: #000000;">digit</span>
         <span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
     <span style="color: #008080;">end</span> <span style="color: #008080;">while</span>
     <span style="color: #008080;">if</span> <span style="color: #000000;">flag</span><span style="color: #0000FF;">=</span><span style="color: #000000;">FRAC</span> <span style="color: #008080;">then</span>
         <span style="color: #000000;">g</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">gcd</span><span style="color: #0000FF;">(</span><span style="color: #000000;">num</span><span style="color: #0000FF;">,</span><span style="color: #000000;">denom</span><span style="color: #0000FF;">)</span>
         <span style="color: #008080;">return</span> <span style="color: #0000FF;">{</span><span style="color: #000000;">num</span><span style="color: #0000FF;">/</span><span style="color: #000000;">g</span><span style="color: #0000FF;">,</span><span style="color: #000000;">denom</span><span style="color: #0000FF;">/</span><span style="color: #000000;">g</span><span style="color: #0000FF;">}</span>
     <span style="color: #008080;">elsif</span> <span style="color: #000000;">flag</span><span style="color: #0000FF;">=</span><span style="color: #000000;">DECIMAL</span> <span style="color: #008080;">then</span>
         <span style="color: #008080;">return</span> <span style="color: #000000;">num</span><span style="color: #0000FF;">/</span><span style="color: #000000;">denom</span>
     <span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
     <span style="color: #008080;">return</span> <span style="color: #0000FF;">{</span><span style="color: #008080;">iff</span><span style="color: #0000FF;">(</span><span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">res</span><span style="color: #0000FF;">)=</span><span style="color: #000000;">0</span><span style="color: #0000FF;">?</span><span style="color: #008000;">"0"</span><span style="color: #0000FF;">:</span><span style="color: #008000;">"0."</span><span style="color: #0000FF;">&</span><span style="color: #000000;">res</span><span style="color: #0000FF;">)}</span>
 <span style="color: #008080;">end</span> <span style="color: #008080;">function</span>
  
 <span style="color: #008080;">procedure</span> <span style="color: #000000;">show_vdc</span><span style="color: #0000FF;">(</span><span style="color: #004080;">integer</span> <span style="color: #000000;">flag</span><span style="color: #0000FF;">,</span> <span style="color: #004080;">string</span> <span style="color: #000000;">fmt</span><span style="color: #0000FF;">)</span>
 <span style="color: #004080;">object</span> <span style="color: #000000;">v</span>
     <span style="color: #008080;">for</span> <span style="color: #000000;">i</span><span style="color: #0000FF;">=</span><span style="color: #000000;">2</span> <span style="color: #008080;">to</span> <span style="color: #000000;">5</span> <span style="color: #008080;">do</span>
         <span style="color: #7060A8;">printf</span><span style="color: #0000FF;">(</span><span style="color: #000000;">1</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"%s %d: "</span><span style="color: #0000FF;">,{</span><span style="color: #000000;">DESC</span><span style="color: #0000FF;">[</span><span style="color: #000000;">flag</span><span style="color: #0000FF;">],</span><span style="color: #000000;">i</span><span style="color: #0000FF;">})</span>
         <span style="color: #008080;">for</span> <span style="color: #000000;">j</span><span style="color: #0000FF;">=</span><span style="color: #000000;">0</span> <span style="color: #008080;">to</span> <span style="color: #000000;">9</span> <span style="color: #008080;">do</span>
             <span style="color: #000000;">v</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">vdc</span><span style="color: #0000FF;">(</span><span style="color: #000000;">j</span><span style="color: #0000FF;">,</span><span style="color: #000000;">i</span><span style="color: #0000FF;">,</span><span style="color: #000000;">flag</span><span style="color: #0000FF;">)</span>
             <span style="color: #008080;">if</span> <span style="color: #000000;">flag</span><span style="color: #0000FF;">=</span><span style="color: #000000;">FRAC</span> <span style="color: #008080;">and</span> <span style="color: #000000;">v</span><span style="color: #0000FF;">[</span><span style="color: #000000;">1</span><span style="color: #0000FF;">]=</span><span style="color: #000000;">0</span> <span style="color: #008080;">then</span>
                 <span style="color: #7060A8;">printf</span><span style="color: #0000FF;">(</span><span style="color: #000000;">1</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"0 "</span><span style="color: #0000FF;">)</span>
             <span style="color: #008080;">else</span>
                 <span style="color: #7060A8;">printf</span><span style="color: #0000FF;">(</span><span style="color: #000000;">1</span><span style="color: #0000FF;">,</span><span style="color: #000000;">fmt</span><span style="color: #0000FF;">,</span><span style="color: #000000;">v</span><span style="color: #0000FF;">)</span>
             <span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
         <span style="color: #008080;">end</span> <span style="color: #008080;">for</span>
         <span style="color: #7060A8;">puts</span><span style="color: #0000FF;">(</span><span style="color: #000000;">1</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"\n"</span><span style="color: #0000FF;">)</span>
     <span style="color: #008080;">end</span> <span style="color: #008080;">for</span>
 <span style="color: #008080;">end</span> <span style="color: #008080;">procedure</span>
  
 <span style="color: #000000;">show_vdc</span><span style="color: #0000FF;">(</span><span style="color: #000000;">BASE</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"%s "</span><span style="color: #0000FF;">)</span>
 <span style="color: #000000;">show_vdc</span><span style="color: #0000FF;">(</span><span style="color: #000000;">FRAC</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"%d/%d "</span><span style="color: #0000FF;">)</span>
 <span style="color: #000000;">show_vdc</span><span style="color: #0000FF;">(</span><span style="color: #000000;">DECIMAL</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"%g "</span><span style="color: #0000FF;">)</span>
<!--</syntaxhighlight>-->
{{out}}
<pre>
Base 2: 0 0.1 0.01 0.11 0.001 0.101 0.011 0.111 0.0001 0.1001
Base 3: 0 0.1 0.2 0.01 0.11 0.21 0.02 0.12 0.22 0.001
Base 4: 0 0.1 0.2 0.3 0.01 0.11 0.21 0.31 0.02 0.12
Base 5: 0 0.1 0.2 0.3 0.4 0.01 0.11 0.21 0.31 0.41
Fraction 2: 0 1/2 1/4 3/4 1/8 5/8 3/8 7/8 1/16 9/16
Fraction 3: 0 1/3 2/3 1/9 4/9 7/9 2/9 5/9 8/9 1/27
Fraction 4: 0 1/4 1/2 3/4 1/16 5/16 9/16 13/16 1/8 3/8
Fraction 5: 0 1/5 2/5 3/5 4/5 1/25 6/25 11/25 16/25 21/25
Decimal 2: 0 0.5 0.25 0.75 0.125 0.625 0.375 0.875 0.0625 0.5625
Decimal 3: 0 0.333333 0.666667 0.111111 0.444444 0.777778 0.222222 0.555556 0.888889 0.037037
Decimal 4: 0 0.25 0.5 0.75 0.0625 0.3125 0.5625 0.8125 0.125 0.375
Decimal 5: 0 0.2 0.4 0.6 0.8 0.04 0.24 0.44 0.64 0.84
</pre>

=={{header|PicoLisp}}==
<syntaxhighlight lang="picolisp">(scl 6)

(de vdc (N B)
   (default B 2)
   (let (R 0  A 1.0)
      (until (=0 N)
         (inc 'R (* (setq A (/ A B)) (% N B)))
         (setq N (/ N B)) )
      R ) )

(for B (2 3 4)
   (prinl "Base: " B)
   (for N (range 0 9)
      (prinl N ": " (round (vdc N B) 4)) ) )</syntaxhighlight>
{{out}}
<pre style="height:20em;overflow:scroll">Base: 2
0: 0.0000
1: 0.5000
2: 0.2500
3: 0.7500
4: 0.1250
5: 0.6250
6: 0.3750
7: 0.8750
8: 0.0625
9: 0.5625
Base: 3
0: 0.0000
1: 0.3333
2: 0.6667
3: 0.1111
4: 0.4444
5: 0.7778
6: 0.2222
7: 0.5556
8: 0.8889
9: 0.0370
Base: 4
0: 0.0000
1: 0.2500
2: 0.5000
3: 0.7500
4: 0.0625
5: 0.3125
6: 0.5625
7: 0.8125
8: 0.1250
9: 0.3750</pre>

=={{header|PL/I}}==
<syntaxhighlight lang="text">
vdcb: procedure (an) returns (bit (31)); /* 6 July 2012 */
   declare an fixed binary (31);
   declare (n, i) fixed binary (31);
   declare v bit (31) varying;

   n = an; v = ''b;
   do i = 1 by 1 while (n > 0);
      if iand(n, 1) = 1 then v = v || '1'b; else v = v || '0'b;
      n = isrl(n, 1);
   end;
   return (v);
end vdcb;

   declare i fixed binary (31);

   do i = 0 to 10;
      put skip list ('0.' || vdcb(i));
   end;
</syntaxhighlight>
{{out}}
<pre>
0.0000000000000000000000000000000 
0.1000000000000000000000000000000 
0.0100000000000000000000000000000 
0.1100000000000000000000000000000 
0.0010000000000000000000000000000 
0.1010000000000000000000000000000 
0.0110000000000000000000000000000 
0.1110000000000000000000000000000 
0.0001000000000000000000000000000 
0.1001000000000000000000000000000 
0.0101000000000000000000000000000 
</pre>

=={{header|Prolog}}==
=== Example solution ===
<syntaxhighlight lang="prolog">% vdc( N, Base, Out )
% Out = the Van der Corput representation of N in given Base
vdc( 0, _, [] ).
vdc( N, Base, Out ) :-
    Nr is mod(N, Base),
    Nq is N // Base,
    vdc( Nq, Base, Tmp ),
    Out = [Nr|Tmp].
 
% Writes every element of a list to stdout; no newlines
write_list( [] ).
write_list( [H|T] ) :-
    write( H ),
    write_list( T ).

% Writes the Nth Van der Corput item.
print_vdc( N, Base ) :-
    vdc( N, Base, Lst ),
    write('0.'),
    write_list( Lst ).
print_vdc( N ) :-
    print_vdc( N, 2 ).
 
% Prints the first N+1 elements of the Van der Corput
% sequence, each to its own line
print_some( 0, _ ) :-
    write( '0.0' ).
print_some( N, Base ) :-
    M is N - 1,
    print_some( M, Base ),
    nl,
    print_vdc( N, Base ).
print_some( N ) :-
    print_some( N, 2 ).

test :-
   writeln('First 10 members in base 2:'),
   print_some( 9 ),
   nl,
   write('7th member in base 4 (stretch goal) => '),
   print_vdc( 7, 4 ).
</syntaxhighlight>

{{out}} (result of test):
<pre>
First 10 members in base 2:
0.0
0.1
0.01
0.11
0.001
0.101
0.011
0.111
0.0001
0.1001
7th member in base 4 (stretch goal) => 0.31
true .
</pre>

=== Solution with generator ===
<syntaxhighlight lang="prolog">
% g(B,N,X):- consecutively generate in X the first N elements of the sequence based on {0, 1, ..., B}

g(_,N,[L|_]-_,X):- N > 1, atomic_list_concat(['0.'|L],X).
g(B,N,[L|Ls]-Xs,X):- N > 2, M is N-1, findall([I|L], between(0,B,I), T), append(T,Ys,Xs), g(B,M,Ls-Ys,X).
g(_,N,'0.0'):- N > 0.
g(B,N,X):- N > 0, findall([I], between(1,B,I), T), T \= [], append(T,Ys,Xs), g(B,N,Xs-Ys,X).
</syntaxhighlight>
{{out}}
<pre>
?- g(2,10,X).   
X = '0.0' ;
X = '0.1' ;
X = '0.2' ;
X = '0.01' ;
...
X = '0.001' ;
false.

?- time(findall(X, g(1,1000000,X), T)).
% 23,000,011 inferences, 5.938 CPU in 6.083 seconds (98% CPU, 3873686 Lips)
T = ['0.0', '0.1', '0.01', '0.11', '0.001', '0.101', '0.011', '0.111', '0.0001'|...].
</pre>

=={{header|PureBasic}}==
<syntaxhighlight lang="purebasic">Procedure.d nBase(n.i,b.i)
  Define r.d,s.i=1  
  While n
    s*b
    r+(Mod(n,b)/s)
    n=Int(n/b)
  Wend  
  ProcedureReturn r    
EndProcedure

Define.i b,c
OpenConsole("van der Corput - Sequence")
For b=2 To 5
  Print("Base "+Str(b)+": ")
  For c=0 To 9    
    Print(StrD(nBase(c,b),5)+~"\t")
  Next
  PrintN("")
Next
Input()</syntaxhighlight>
{{out}}
<pre>Base 2: 0.00000 0.50000 0.25000 0.75000 0.12500 0.62500 0.37500 0.87500 0.06250 0.56250
Base 3: 0.00000 0.33333 0.66667 0.11111 0.44444 0.77778 0.22222 0.55556 0.88889 0.03704
Base 4: 0.00000 0.25000 0.50000 0.75000 0.06250 0.31250 0.56250 0.81250 0.12500 0.37500
Base 5: 0.00000 0.20000 0.40000 0.60000 0.80000 0.04000 0.24000 0.44000 0.64000 0.84000</pre>

=={{header|Python}}==
(Python3.x)

The multi-base sequence generator 
<syntaxhighlight lang="python">def vdc(n, base=2):
    vdc, denom = 0,1
    while n:
        denom *= base
        n, remainder = divmod(n, base)
        vdc += remainder / denom
    return vdc</syntaxhighlight>

'''Sample output'''

Base 2 and then 3:
<syntaxhighlight lang="python">>>> [vdc(i) for i in range(10)]
[0, 0.5, 0.25, 0.75, 0.125, 0.625, 0.375, 0.875, 0.0625, 0.5625]
>>> [vdc(i, 3) for i in range(10)]
[0, 0.3333333333333333, 0.6666666666666666, 0.1111111111111111, 0.4444444444444444, 0.7777777777777777, 0.2222222222222222, 0.5555555555555556, 0.8888888888888888, 0.037037037037037035]
>>> </syntaxhighlight>

===As fractions===
We can get the output as rational numbers if we use the fraction module 
(and change its string representation to look like a fraction):
<syntaxhighlight lang="python">>>> from fractions import Fraction
>>> Fraction.__repr__ = lambda x: '%i/%i' % (x.numerator, x.denominator)
>>> [vdc(i, base=Fraction(2)) for i in range(10)]
[0, 1/2, 1/4, 3/4, 1/8, 5/8, 3/8, 7/8, 1/16, 9/16]</syntaxhighlight>

===Stretch goal===
Sequences for different bases:
<syntaxhighlight lang="python">>>> for b in range(3,6):
	print('\nBase', b)
	print([vdc(i, base=Fraction(b)) for i in range(10)])

Base 3
[0, 1/3, 2/3, 1/9, 4/9, 7/9, 2/9, 5/9, 8/9, 1/27]

Base 4
[0, 1/4, 1/2, 3/4, 1/16, 5/16, 9/16, 13/16, 1/8, 3/8]

Base 5
[0, 1/5, 2/5, 3/5, 4/5, 1/25, 6/25, 11/25, 16/25, 21/25]</syntaxhighlight>

=={{header|Quackery}}==

<syntaxhighlight lang="quackery">  [ $ "bigrat.qky" loadfile ] now!

  [ [] swap 
    [ dup while 
      base share /mod 
      rot join swap
      again ]
    drop ]                   is digits (   n --> [   )

  [ base put 
    digits reverse
    dup 0 swap
    witheach 
      [ base share rot * + ] 
    base take rot size ** 
    reduce ]                 is corput ( n n --> n/d )


  5 times
    [ say "base "
      i^ 2 + dup echo
      say ":  "
      10 times 
        [ i^ over corput
          vulgar$ echo$ sp sp ]
      cr drop ]</syntaxhighlight>

{{out}}

<pre>base 2:  0/1  1/2  1/4  3/4  1/8  5/8  3/8  7/8  1/16  9/16  
base 3:  0/1  1/3  2/3  1/9  4/9  7/9  2/9  5/9  8/9  1/27  
base 4:  0/1  1/4  1/2  3/4  1/16  5/16  9/16  13/16  1/8  3/8  
base 5:  0/1  1/5  2/5  3/5  4/5  1/25  6/25  11/25  16/25  21/25  
base 6:  0/1  1/6  1/3  1/2  2/3  5/6  1/36  7/36  13/36  19/36  
</pre>

=={{header|Racket}}==
Following the suggestion.
<syntaxhighlight lang="racket">#lang racket
(define (van-der-Corput n base)
  (if (zero? n)
      0
      (let-values ([(q r) (quotient/remainder n base)])
        (/ (+ r (van-der-Corput q base))
           base))))</syntaxhighlight>
By digits, extracted arithmetically.
<syntaxhighlight lang="racket">#lang racket
(define (digit-length n base)
  (if (< n base) 1 (add1 (digit-length (quotient n base) base))))
(define (digit n i base)
  (remainder (quotient n (expt base i)) base))
(define (van-der-Corput n base)
  (for/sum ([i (digit-length n base)]) (/ (digit n i base) (expt base (+ i 1)))))</syntaxhighlight>
Output.
<syntaxhighlight lang="racket">(for ([base (in-range 2 (add1 5))])
  (printf "Base ~a: " base)
  (for ([n (in-range 0 10)])
    (printf "~a " (van-der-Corput n base)))
  (newline))

#| Base 2: 0 1/2 1/4 3/4 1/8 5/8 3/8 7/8 1/16 9/16
   Base 3: 0 1/3 2/3 1/9 4/9 7/9 2/9 5/9 8/9 1/27
   Base 4: 0 1/4 1/2 3/4 1/16 5/16 9/16 13/16 1/8 3/8
   Base 5: 0 1/5 2/5 3/5 4/5 1/25 6/25 11/25 16/25 21/25 |# </syntaxhighlight>

=={{header|Raku}}==
(formerly Perl 6)
{{works with|Rakudo|2020.08.1}}
First a cheap implementation in base 2, using string operations.

<syntaxhighlight lang="raku" line>constant VdC = map { :2("0." ~ .base(2).flip) }, ^Inf;
.say for VdC[^16];</syntaxhighlight>

Here is a more elaborate version using the polymod built-in integer method:
<syntaxhighlight lang="raku" line>sub VdC($base = 2) {
    map {
        [+] $_ && .polymod($base xx *) Z/ [\*] $base xx *
    }, ^Inf
}

.say for VdC[^10];</syntaxhighlight>
{{out}}
<pre>0
0.5
0.25
0.75
0.125
0.625
0.375
0.875
0.0625
0.5625</pre>

Here is a fairly standard imperative version in which we mutate three variables in parallel:
<syntaxhighlight lang="raku" line>sub vdc($num, $base = 2) {
    my $n = $num;
    my $vdc = 0;
    my $denom = 1;
    while $n {
        $vdc += $n mod $base / ($denom *= $base);
        $n div= $base;
    }
    $vdc;
}

for 2..5 -> $b {
    say "Base $b";
    say ( vdc($_,$b).Rat.nude.join('/') for ^10 ).join(', ');
    say '';
}</syntaxhighlight>
{{out}}
<pre>Base 2
0, 1/2, 1/4, 3/4, 1/8, 5/8, 3/8, 7/8, 1/16, 9/16

Base 3
0, 1/3, 2/3, 1/9, 4/9, 7/9, 2/9, 5/9, 8/9, 1/27

Base 4
0, 1/4, 1/2, 3/4, 1/16, 5/16, 9/16, 13/16, 1/8, 3/8

Base 5
0, 1/5, 2/5, 3/5, 4/5, 1/25, 6/25, 11/25, 16/25, 21/25</pre>
Here is a functional version that produces the same output:
<syntaxhighlight lang="raku" line>sub vdc($value, $base = 2) {
    my @values = $value, { $_ div $base } ... 0;
    my @denoms = $base,  { $_  *  $base } ... *;
    [+] do for (flat @values Z @denoms) -> $v, $d {
        $v mod $base / $d;
    }
}</syntaxhighlight>
We first define two sequences, one finite, one infinite.  
When we zip those sequences together, the finite sequence terminates the loop (which, since a Raku loop returns all its values, is merely another way of writing a <tt>map</tt>).  
We then sum with <tt>[+]</tt>, a reduction of the <tt>+</tt> operator.  
(We could have in-lined the sequences or used a traditional <tt>map</tt> operator, but this way seems more readable than the typical FP solution.)  
The <tt>do</tt> is necessary to introduce a statement where a term is expected, since Raku distinguishes "sentences" from "noun phrases" as a natural language might.

=={{header|REXX}}==
===binary version===
This REXX version only handles binary (base 2).

Virtually any integer (including negative) is allowed and is accurate (no rounding).

A range of integers (for output) is also supported.  
<syntaxhighlight lang="rexx">/*REXX program converts an integer (or a range)  ──►  a Van der Corput number in base 2.*/
numeric digits 1000                              /*handle almost anything the user wants*/
parse arg a b .                                  /*obtain the optional arguments from CL*/
if a==''  then parse value  0  10   with   a  b  /*Not specified?  Then use the defaults*/
if b==''  then b= a                              /*assume a  range  for a single number.*/

      do j=a  to b                               /*traipse through the range of numbers.*/
      _= VdC( abs(j) )                           /*convert absolute value of an integer.*/
      leading= substr('-',   2 + sign(j) )       /*if needed,  elide the leading sign.  */
      say leading  ||  _                         /*show number, with leading minus sign?*/
      end   /*j*/
exit                                             /*stick a fork in it,  we're all done. */
/*──────────────────────────────────────────────────────────────────────────────────────*/
VdC: procedure;    y= x2b( d2x( arg(1) ) )  + 0  /*convert to  hexadecimal, then binary.*/
     if y==0  then return 0                      /*handle the special case of zero.     */
                   return '.'reverse(y)          /*heavy lifting is performed by REXX.  */</syntaxhighlight>
{{out|output|text=&nbsp; when using the default input of: &nbsp; &nbsp; <tt> 0 &nbsp; 10 </tt>
<pre>
0
.1
.01
.11
.001
.101
.011
.111
.0001
.1001
.0101
</pre>

===any radix up to 90=== 
This version handles what the first version does, &nbsp; plus any radix up to (and including) base &nbsp; '''90'''.
<br>It can also support a list (enabled when the base is negative).
<syntaxhighlight lang="rexx">/*REXX pgm converts an integer (or a range) ──► a Van der Corput number,  in base 2, or */
/*────────────────────────────── optionally, any other base up to and including base 90.*/
numeric digits 1000                              /*handle almost anything the user wants*/
parse arg a b r .                                /*obtain optional arguments from the CL*/
if a=='' | a=="," then parse value 0 10 with a b /*Not specified?  Then use the defaults*/
if b=='' | b=="," then b= a                      /* "      "         "   "   "      "   */
if r=='' | r=="," then r= 2                      /* "      "         "   "   "      "   */
z=                                               /*a placeholder for a list of numbers. */
                do j=a  to b                     /*traipse through the range of integers*/
                _= VdC( abs(j), abs(r) )         /*convert the ABSolute value of integer*/
                _= substr('-',  2 + sign(j) )_   /*if needed, keep the leading  -  sign.*/
                if r>0  then say _               /*if positive base, then just show it. */
                        else z=z _               /*     ··· else append (build) a list. */
                end   /*j*/

if z\==''  then say strip(z)                     /*if a list is wanted, then display it.*/
exit                                             /*stick a fork in it,  we're all done. */
/*──────────────────────────────────────────────────────────────────────────────────────*/
base: procedure; parse arg x, toB, inB           /*get a number,  toBase,  and  inBase. */
  /*╔══════════════════════════════════════════════════════════════════════════════════╗
    ║ Input to this function:    x       (X   is required  and it must be an integer). ║
    ║                          toBase    the base to convert   X   to    (default=10). ║
    ║                          inBase    the base  X  is expressed in    (default=10). ║
    ║                                                                                  ║
    ║                                    toBase & inBase  have a limit of:   2 ──► 90  ║
    ╚══════════════════════════════════════════════════════════════════════════════════╝*/
      @abc= 'abcdefghijklmnopqrstuvwxyz'         /*the lowercase Latin alphabet letters.*/
      @abcU= @abc;         upper @abcU           /*go whole hog & extend with uppercase.*/
      @@@= 0123456789 || @abc || @abcU           /*prefix them with the decimal digits. */
      @@@= @@@'<>[]{}()?~!@#$%^&*_+-=|\/;:`'     /*add some special characters as well, */
                                                 /*──those chars should all be viewable.*/
      numeric digits 1000                        /*what the hey, support bigun' numbers.*/
      maxB= length(@@@)                          /*maximum base (radix) supported here. */
      if toB==''  then toB= 10                   /*if omitted,  then assume default (10)*/
      if inB==''  then inB= 10                   /* "    "        "     "      "      " */
      #=0                                        /* [↓] convert base inB  X  ──► base 10*/
             do j=1  for length(x)               /*process each "numeral" in the string.*/
             _= substr(x, j, 1)                  /*pick off a "digit" (numeral) from  X.*/
             v= pos(_, @@@)                      /*get the value of this "digit"/numeral*/
             if v==0 | v>inB  then call erd      /*is it an illegal "digit" (numeral) ? */
             #= # * inB    + v  - 1              /*construct new number, digit by digit.*/
             end   /*j*/
      y=                                         /* [↓] convert base 10  # ──► base toB.*/
             do  while  #>=toB                   /*deconstruct the  new   number (#).   */
             y= substr(@@@, # // toB  + 1,  1)y  /*  construct the output number,  ···  */
             #= # % toB                          /*  ···  and also whittle down  #.     */
             end   /*while*/

      return substr(@@@,  # + 1,  1)y            /*return a constructed "numeric" string*/
/*──────────────────────────────────────────────────────────────────────────────────────*/
erd:  say 'the character '   v    " isn't a legal numeral for base "    inB'.';    exit 13
VdC:  return '.'reverse( base( arg(1), arg(2) )) /*convert the #, reverse the #, append.*/</syntaxhighlight>
(A &nbsp; ''negative'' &nbsp; base indicates to show numbers as a list.)

{{out|output|text=&nbsp; when using the input of: &nbsp; &nbsp; <tt> 0 &nbsp; 30 &nbsp; -2 </tt>}}
<pre>
.0 .1 .01 .11 .001 .101 .011 .111 .0001 .1001 .0101 .1101 .0011 .1011 .0111 .1111 .00001 .10001 .01001 .11001 .00101 .10101 .01101 .11101 .00011 .10011 .01011 .11011 .00111 .10111 .01111
</pre>
{{out|output|text=&nbsp; when using the input of: &nbsp; &nbsp; <tt> 1 &nbsp; 30 &nbsp; -3 </tt>}}
<pre>
.1 .2 .01 .11 .21 .02 .12 .22 .001 .101 .201 .011 .111 .211 .021 .121 .221 .002 .102 .202 .012 .112 .212 .022 .122 .222 .0001 .1001 .2001 .0101
</pre>
{{out|output|text=&nbsp; when using the input of: &nbsp; &nbsp; <tt> 1 &nbsp; 30 &nbsp; -4 </tt>}}
<pre>
.1 .2 .3 .01 .11 .21 .31 .02 .12 .22 .32 .03 .13 .23 .33 .001 .101 .201 .301 .011 .111 .211 .311 .021 .121 .221 .321 .031 .131 .231
</pre>
{{out|output|text=&nbsp; when using the input of: &nbsp; &nbsp; <tt> 1 &nbsp; 30 &nbsp; -5 </tt>}}
<pre>
.1 .2 .3 .4 .01 .11 .21 .31 .41 .02 .12 .22 .32 .42 .03 .13 .23 .33 .43 .04 .14 .24 .34 .44 .001 .101 .201 .301 .401 .011
</pre>
{{out|output|text=&nbsp; when using the input of: &nbsp; &nbsp; <tt> 55582777 &nbsp; 55582804 &nbsp; -80 </tt>}}
<pre>
.V[Is1 .W[Is1 .X[Is1 .Y[Is1 .Z[Is1 .<[Is1 .>[Is1 .[[Is1 .][Is1 .{[Is1 .}[Is1 .([Is1 .)[Is1 .?[Is1 .~[Is1 .![Is1 .@[Is1 .#[Is1 .$[Is1 .%[Is1 .^[Is1 .&[Is1 .*[Is1 .0]Is1 .1]Is1 .2]Is1 .3]Is1 .4]Is1
</pre>

=={{header|Ring}}==
<syntaxhighlight lang="ring">
decimals(4)
for base = 2 to 5
    see "base " + string(base) + " : "
    for number = 0 to 9
        see "" + corput(number, base) + " "
    next
    see nl 
next

func corput n, b
     vdc = 0
     denom = 1
     while n 
           denom *= b
           rem = n % b
           n = floor(n/b)
           vdc += rem / denom
     end
     return vdc
</syntaxhighlight>
Output:
<pre>
base 2 : 0 0.5000 0.2500 0.7500 0.1250 0.6250 0.3750 0.8750 0.0625 0.5625
base 3 : 0 0.3333 0.6667 0.1111 0.4444 0.7778 0.2222 0.5556 0.8889 0.0370
base 4 : 0 0.2500 0.5000 0.7500 0.0625 0.3125 0.5625 0.8125 0.1250 0.3750
base 5 : 0 0.2000 0.4000 0.6000 0.8000 0.0400 0.2400 0.4400 0.6400 0.8400
</pre>

=={{header|RPL}}==
{{trans|Python}}
{{works with|Halcyon Calc|4.2.7}}
{| class="wikitable"
! RPL code
! Comment
|-
| 
 ≪ → base
   ≪ 0 1 ROT
      '''WHILE''' DUP '''REPEAT'''
          SWAP base * SWAP
          base / LAST MOD IP
          3 PICK / 4 ROLL + ROT ROT 
      '''END''' DROP2
 ≫ ≫ 'VDC' STO
| 
  '''VDC''' ''( n base -- vdc )'' 
    vdc, denom = 0,1
    while n:
        denom *= base
        n, remainder = divmod(n, base)
        vdc += remainder / denom
    return vdc
 
|}
{{in}}
<pre>
≪ {} 0 9 FOR j j 2 VDC + NEXT ≫ EVAL
≪ {} 0 9 FOR j j 3 VDC + NEXT ≫ EVAL
</pre>
{{out}}
<pre>
2: { 0 0.5 0.25 0.75 0.125 0.625 0.375 0.875 0.0625 0.5625 }
1: { 0 0.333333333333 0.666666666667 0.111111111111 0.444444444444 0.777777777778 0.222222222222 0.555555555556 0.888888888889 3.7037037037E-02 }
</pre>


=={{header|Ruby}}==
The multi-base sequence generator
<syntaxhighlight lang="ruby">def vdc(n, base=2)
  str = n.to_s(base).reverse
  str.to_i(base).quo(base ** str.length)
end

(2..5).each do |base|
  puts "Base #{base}: " + Array.new(10){|i| vdc(i,base)}.join(", ")
end</syntaxhighlight>

'''Sample output'''
<pre>
Base 2: 0/1, 1/2, 1/4, 3/4, 1/8, 5/8, 3/8, 7/8, 1/16, 9/16
Base 3: 0/1, 1/3, 2/3, 1/9, 4/9, 7/9, 2/9, 5/9, 8/9, 1/27
Base 4: 0/1, 1/4, 1/2, 3/4, 1/16, 5/16, 9/16, 13/16, 1/8, 3/8
Base 5: 0/1, 1/5, 2/5, 3/5, 4/5, 1/25, 6/25, 11/25, 16/25, 21/25
</pre>

=={{header|Rust}}==
<syntaxhighlight lang="rust">
/// Van der Corput sequence for any base, based on C languange example from Wikipedia.
pub fn corput(nth: usize, base: usize) -> f64 {
    let mut n = nth;
    let mut q: f64 = 0.0;
    let mut bk: f64 = 1.0 / (base as f64);

    while n > 0_usize {
      q += ((n % base) as f64)*bk;
      n /= base;
      bk /= base as f64;
    }
    q
}

fn main() {
  for base in 2_usize..=5_usize {
    print!("Base {}:", base);
    for i in 1_usize..=10_usize {
      let c = corput(i, base);
      print!("  {:.6}", c)
    }
    println!("");
  }
}

</syntaxhighlight>

{{out}}
<pre>
Base 2:  0.500000  0.250000  0.750000  0.125000  0.625000  0.375000  0.875000  0.062500  0.562500  0.312500
Base 3:  0.333333  0.666667  0.111111  0.444444  0.777778  0.222222  0.555556  0.888889  0.037037  0.370370
Base 4:  0.250000  0.500000  0.750000  0.062500  0.312500  0.562500  0.812500  0.125000  0.375000  0.625000
Base 5:  0.200000  0.400000  0.600000  0.800000  0.040000  0.240000  0.440000  0.640000  0.840000  0.080000
</pre>

=={{header|Scala}}==
<syntaxhighlight lang="scala">object VanDerCorput extends App {
    def compute(n: Int, base: Int = 2) =
        Iterator.from(0).
            scanLeft(1)((a, _) => a * base).
            map(b => (n - 1) / b -> b).
            takeWhile(_._1 != 0).
            foldLeft(0d)((a, b) => a + (b._1 % base).toDouble / b._2 / base)

    val n = scala.io.StdIn.readInt
    val b = scala.io.StdIn.readInt
    (1 to n).foreach(x => println(compute(x, b)))
}</syntaxhighlight>

{{out}}
<pre>
n: 30
base: 2
0.0
0.5
0.25
0.75
0.125
0.625
0.375
0.875
0.0625
0.5625
0.3125
0.8125
0.1875
0.6875
0.4375
0.9375
0.03125
0.53125
0.28125
0.78125
0.15625
0.65625
0.40625
0.90625
0.09375
0.59375
0.34375
0.84375
0.21875
0.71875</pre>

=={{header|Seed7}}==
{{trans|D}}
<syntaxhighlight lang="seed7">$ include "seed7_05.s7i";
  include "float.s7i";
 
const func float: vdc (in var integer: number, in integer: base) is func
  result
    var float: vdc is 0.0;
  local
    var integer: denom is 1;
    var integer: remainder is 0;
  begin
    while number <> 0 do
      denom *:= base;
      remainder := number rem base;
      number := number div base;
      vdc +:= flt(remainder) / flt(denom);
    end while;
  end func;
 
const proc: main is func
  local
    var integer: base is 0;
    var integer: number is 0;
  begin
    for base range 2 to 5 do
      writeln;
      writeln("Base " <& base);
      for number range 0 to 9 do
        write(vdc(number, base) digits 6 <& " ");
      end for;
      writeln;
    end for;
  end func;</syntaxhighlight>

{{out}}
<pre>

Base 2
0.000000 0.500000 0.250000 0.750000 0.125000 0.625000 0.375000 0.875000 0.062500 0.562500 

Base 3
0.000000 0.333333 0.666667 0.111111 0.444444 0.777778 0.222222 0.555556 0.888889 0.037037 

Base 4
0.000000 0.250000 0.500000 0.750000 0.062500 0.312500 0.562500 0.812500 0.125000 0.375000 

Base 5
0.000000 0.200000 0.400000 0.600000 0.800000 0.040000 0.240000 0.440000 0.640000 0.840000 
</pre>

=={{header|Sidef}}==
{{trans|Perl}}
<syntaxhighlight lang="ruby">func vdc(value, base=2) {
    while (value[-1] > 0) {
        value.append(value[-1] / base -> int)
    }
    var (x, sum) = (1, 0)
    value.each { |i|
        sum += ((i % base) / (x *= base))
    }
    return sum
}
 
for base in (2..5) {
    var seq = 10.of {|i| vdc([i], base) }
    "base %d: %s\n".printf(base, seq.map{|n| "%.4f" % n}.join(', '))
}</syntaxhighlight>
{{out}}
<pre>base 2: 0.0000, 0.5000, 0.2500, 0.7500, 0.1250, 0.6250, 0.3750, 0.8750, 0.0625, 0.5625
base 3: 0.0000, 0.3333, 0.6667, 0.1111, 0.4444, 0.7778, 0.2222, 0.5556, 0.8889, 0.0370
base 4: 0.0000, 0.2500, 0.5000, 0.7500, 0.0625, 0.3125, 0.5625, 0.8125, 0.1250, 0.3750
base 5: 0.0000, 0.2000, 0.4000, 0.6000, 0.8000, 0.0400, 0.2400, 0.4400, 0.6400, 0.8400</pre>

=={{header|Stata}}==
Stata has builtin functions in Mata to compute '''[https://en.wikipedia.org/wiki/Halton_sequence Halton sequences]''', which are generalizations of the Van der Corput sequence. See '''[https://www.stata.com/help.cgi?mf_halton halton]''' in Stata help, and two articles in the Stata Journal: '''[http://www.stata-journal.com/article.html?article=st0244 Scrambled Halton sequences in Mata]''' by Stanislav Kolenikov and '''[http://www.stata-journal.com/article.html?article=st0103 Generating Halton sequences using Mata]''' by David M. Drukker and Richard Gates.

<syntaxhighlight lang="stata">mata
// 5th term of Van der Corput sequence
halton(1,1,5)
  .625

// the first 10 terms of Van der Corput sequence
halton(10,1)
            1
     +---------+
   1 |     .5  |
   2 |    .25  |
   3 |    .75  |
   4 |   .125  |
   5 |   .625  |
   6 |   .375  |
   7 |   .875  |
   8 |  .0625  |
   9 |  .5625  |
  10 |  .3125  |
     +---------+

// the first 10 terms of Van der Corput sequence in base 3
ghalton(10,3,0)
                  1
     +---------------+
   1 |  .3333333333  |
   2 |  .6666666667  |
   3 |  .1111111111  |
   4 |  .4444444444  |
   5 |  .7777777778  |
   6 |  .2222222222  |
   7 |  .5555555556  |
   8 |  .8888888889  |
   9 |   .037037037  |
  10 |  .3703703704  |
     +---------------+

end</syntaxhighlight>

Reproduce the plot in the task description:

<syntaxhighlight lang="stata">clear
mata
st_addobs(2500)
st_addvar("double","x")
st_addvar("double","y")
st_addvar("double","z")
k=1::2500
st_store(k,1,k)
st_store(k,2,0.5*runiform(2500,1))
st_store(k,3,0.5:+0.5*halton(2500,1))
end
twoway scatter y x, msize(tiny) color(blue) ///
    || scatter z x, msize(tiny) color(green) legend(off) xtitle("") ///
	title(Distribution: Van der Corput (top) vs pseudorandom) ///
	ylabel(, angle(0) format(%3.1f))</syntaxhighlight>

=={{header|Swift}}==
{{trans|C}}
<syntaxhighlight lang="swift">func vanDerCorput(n: Int, base: Int, num: inout Int, denom: inout Int) {
  var n = n, p = 0, q = 1

  while n != 0 {
    p = p * base + (n % base)
    q *= base
    n /= base
  }

  num = p
  denom = q

  while p != 0 {
    n = p
    p = q % p
    q = n
  }

  num /= q
  denom /= q
}

var num = 0
var denom = 0

for base in 2...5 {
  print("base \(base): 0 ", terminator: "")

  for n in 1..<10 {
    vanDerCorput(n: n, base: base, num: &num, denom: &denom)

    print("\(num)/\(denom) ", terminator: "")
  }

  print()
}</syntaxhighlight>

{{out}}
<pre>base 2: 0 1/2 1/4 3/4 1/8 5/8 3/8 7/8 1/16 9/16 
base 3: 0 1/3 2/3 1/9 4/9 7/9 2/9 5/9 8/9 1/27 
base 4: 0 1/4 1/2 3/4 1/16 5/16 9/16 13/16 1/8 3/8 
base 5: 0 1/5 2/5 3/5 4/5 1/25 6/25 11/25 16/25 21/25</pre>

=={{header|Tcl}}==
The core of this is code to handle digit reversing. Note that this also tackles negative numbers (by preserving the sign independently).
<syntaxhighlight lang="tcl">proc digitReverse {n {base 2}} {
    set n [expr {[set neg [expr {$n < 0}]] ? -$n : $n}]
    set result 0.0
    set bit [expr {1.0 / $base}]
    for {} {$n > 0} {set n [expr {$n / $base}]} {
	set result [expr {$result + $bit * ($n % $base)}]
	set bit [expr {$bit / $base}]
    }
    return [expr {$neg ? -$result : $result}]
}</syntaxhighlight>
Note that the above procedure will produce terms of the Van der Corput sequence by default.
<syntaxhighlight lang="tcl"># Print the first 10 terms of the Van der Corput sequence
for {set i 1} {$i <= 10} {incr i} {
    puts "vanDerCorput($i) = [digitReverse $i]"
}

# In other bases
foreach base {3 4 5} {
    set seq {}
    for {set i 1} {$i <= 10} {incr i} {
	lappend seq [format %.5f [digitReverse $i $base]]
    }
    puts "${base}: [join $seq {, }]"
}</syntaxhighlight>
{{out}}
<pre>
vanDerCorput(1) = 0.5
vanDerCorput(2) = 0.25
vanDerCorput(3) = 0.75
vanDerCorput(4) = 0.125
vanDerCorput(5) = 0.625
vanDerCorput(6) = 0.375
vanDerCorput(7) = 0.875
vanDerCorput(8) = 0.0625
vanDerCorput(9) = 0.5625
vanDerCorput(10) = 0.3125
3: 0.33333, 0.66667, 0.11111, 0.44444, 0.77778, 0.22222, 0.55556, 0.88889, 0.03704, 0.37037
4: 0.25000, 0.50000, 0.75000, 0.06250, 0.31250, 0.56250, 0.81250, 0.12500, 0.37500, 0.62500
5: 0.20000, 0.40000, 0.60000, 0.80000, 0.04000, 0.24000, 0.44000, 0.64000, 0.84000, 0.08000
</pre>

=={{header|VBA}}==
{{trans|Phix}}Base only.<syntaxhighlight lang="vb">Private Function vdc(ByVal n As Integer, BASE As Variant) As Variant
    Dim res As String
    Dim digit As Integer, g As Integer, denom As Integer
    denom = 1
    Do While n
        denom = denom * BASE
        digit = n Mod BASE
        n = n \ BASE
        res = res & CStr(digit) '+ "0"
    Loop
    vdc = IIf(Len(res) = 0, "0", "0." & res)
End Function
 
Public Sub show_vdc()
    Dim v As Variant, j As Integer
    For i = 2 To 5
        Debug.Print "Base "; i; ": ";
        For j = 0 To 9
            v = vdc(j, i)
            Debug.Print v; " ";
        Next j
        Debug.Print
    Next i
End Sub</syntaxhighlight>{{out}}
<pre>Base  2 : 0 0.1 0.01 0.11 0.001 0.101 0.011 0.111 0.0001 0.1001 
Base  3 : 0 0.1 0.2 0.01 0.11 0.21 0.02 0.12 0.22 0.001 
Base  4 : 0 0.1 0.2 0.3 0.01 0.11 0.21 0.31 0.02 0.12 
Base  5 : 0 0.1 0.2 0.3 0.4 0.01 0.11 0.21 0.31 0.41 </pre>

=={{header|VBScript}}==
<syntaxhighlight lang="vbscript">'http://rosettacode.org/wiki/Van_der_Corput_sequence
'Van der Corput Sequence fucntion call = VanVanDerCorput(number,base)

Base2 = "0" : Base3 = "0" : Base4 = "0" : Base5 = "0"
Base6 = "0" : Base7 = "0" : Base8 = "0" : Base9 = "0"

l = 1
h = 1
Do Until l = 9
	'Set h to the value of l after each function call
	'as it sets it to 0 - see lines 37 to 40.
	Base2 = Base2 & ", " & VanDerCorput(h,2) : h = l
	Base3 = Base3 & ", " & VanDerCorput(h,3) : h = l
	Base4 = Base4 & ", " & VanDerCorput(h,4) : h = l
	Base5 = Base5 & ", " & VanDerCorput(h,5) : h = l
	Base6 = Base6 & ", " & VanDerCorput(h,6) : h = l
	l = l + 1
Loop

WScript.Echo "Base 2: " & Base2
WScript.Echo "Base 3: " & Base3
WScript.Echo "Base 4: " & Base4
WScript.Echo "Base 5: " & Base5
WScript.Echo "Base 6: " & Base6

'Van der Corput Sequence
Function VanDerCorput(n,b)
	k = RevString(Dec2BaseN(n,b))
	For i = 1 To Len(k)
		VanDerCorput = VanDerCorput + (CLng(Mid(k,i,1)) * b^-i)
	Next
End Function

'Decimal to Base N Conversion
Function Dec2BaseN(q,c)
	Dec2BaseN = ""
	Do Until q = 0
		Dec2BaseN = CStr(q Mod c) & Dec2BaseN
		q = Int(q / c)
	Loop
End Function

'Reverse String
Function RevString(s)
	For j = Len(s) To 1 Step -1
		RevString = RevString & Mid(s,j,1)
	Next
End Function</syntaxhighlight>
{{out}}
<pre>
Base 2: 0, 0.5, 0.5, 0.25, 0.75, 0.125, 0.625, 0.375, 0.875
Base 3: 0, 0.333333333333333, 0.666666666666667, 0.111111111111111, 0.444444444444444, 0.777777777777778, 0.222222222222222, 0.555555555555556, 0.888888888888889
Base 4: 0, 0.25, 0.5, 0.75, 0.0625, 0.3125, 0.5625, 0.8125, 0.125
Base 5: 0, 0.2, 0.4, 0.6, 0.8, 0.04, 0.24, 0.44, 0.64
Base 6: 0, 0.166666666666667, 0.333333333333333, 0.5, 0.666666666666667, 0.833333333333333, 2.77777777777778E-02, 0.194444444444444, 0.361111111111111
</pre>

=={{header|Visual Basic .NET}}==
{{trans|C}}
<syntaxhighlight lang="vbnet">Module Module1

    Function ToBase(n As Integer, b As Integer) As String
        Dim result = ""
        If b < 2 Or b > 16 Then
            Throw New ArgumentException("The base is out of range")
        End If

        Do
            Dim remainder = n Mod b
            result = "0123456789ABCDEF"(remainder) + result
            n = n \ b
        Loop While n > 0

        Return result
    End Function

    Sub Main()
        For b = 2 To 5
            Console.WriteLine("Base = {0}", b)
            For i = 0 To 12
                Dim s = "." + ToBase(i, b)
                Console.Write("{0,6} ", s)
            Next
            Console.WriteLine()
            Console.WriteLine()
        Next
    End Sub

End Module</syntaxhighlight>
{{out}}
<pre>Base = 2
    .0     .1    .10    .11   .100   .101   .110   .111  .1000  .1001  .1010  .1011  .1100

Base = 3
    .0     .1     .2    .10    .11    .12    .20    .21    .22   .100   .101   .102   .110

Base = 4
    .0     .1     .2     .3    .10    .11    .12    .13    .20    .21    .22    .23    .30

Base = 5
    .0     .1     .2     .3     .4    .10    .11    .12    .13    .14    .20    .21    .22</pre>

=={{header|V (Vlang)}}==
{{trans|Go}}
<syntaxhighlight lang="v (vlang)">fn v2(nn u32) f64 {
    mut n:=nn
    mut r := f64(0)
    mut p := .5
    for n > 0 {
        if n&1 == 1 {
            r += p
        }
        p *= .5
        n >>= 1
    }
    return r
}
 
fn new_v(base u32) fn(u32) f64 {
    invb := 1 / f64(base)
    return fn[base,invb](nn u32) f64 {
        mut n:=nn
        mut r := f64(0)
        mut p := invb
        for n > 0 {
            r += p * f64(n%base)
            p *= invb
            n /= base
        }
        return r
    }
}
 
fn main() {
    println("Base 2:")
    for i := u32(0); i < 10; i++ {
        println('$i ${v2(i)}')
    }
    println("Base 3:")
    v3 := new_v(3)
    for i := u32(0); i < 10; i++ {
        println('$i ${v3(i)}')
    }
}</syntaxhighlight>

{{out}}
<pre>
Base 2:
0 0
1 0.5
2 0.25
3 0.75
4 0.125
5 0.625
6 0.375
7 0.875
8 0.0625
9 0.5625
Base 3:
0 0
1 0.3333333333333333
2 0.6666666666666666
3 0.1111111111111111
4 0.4444444444444444
5 0.7777777777777777
6 0.2222222222222222
7 0.5555555555555556
8 0.8888888888888888
9 0.037037037037037035
</pre>

=={{header|Wren}}==
{{trans|Go}}
<syntaxhighlight lang="wren">var v2 = Fn.new { |n|
    var p = 0.5
    var r = 0
    while (n > 0) {
        if (n%2 == 1) r = r + p
        p = p / 2
        n = (n/2).floor
    }
    return r
}

var newV = Fn.new { |base|
    var invb = 1 / base
    return Fn.new { |n|
        var p = invb
        var r = 0
        while (n > 0) {
            r = r + p*(n%base)
            p = p * invb
            n = (n/base).floor
        }
        return r
    }
}

System.print("Base 2:")
for (i in 0..9) System.print("%(i) -> %(v2.call(i))")

System.print("\nBase 3:")
var v3 = newV.call(3)
for (i in 0..9) System.print("%(i) -> %(v3.call(i))")</syntaxhighlight>

{{out}}
<pre>
Base 2:
0 -> 0
1 -> 0.5
2 -> 0.25
3 -> 0.75
4 -> 0.125
5 -> 0.625
6 -> 0.375
7 -> 0.875
8 -> 0.0625
9 -> 0.5625

Base 3:
0 -> 0
1 -> 0.33333333333333
2 -> 0.66666666666667
3 -> 0.11111111111111
4 -> 0.44444444444444
5 -> 0.77777777777778
6 -> 0.22222222222222
7 -> 0.55555555555556
8 -> 0.88888888888889
9 -> 0.037037037037037
</pre>

=={{header|XPL0}}==
<syntaxhighlight lang="xpl0">include c:\cxpl\codes;  \intrinsic 'code' declarations

func real VdC(N);       \Return Nth term of van der Corput sequence in base 2
int  N;
real V, U;
[V:= 0.0;  U:= 0.5;
repeat  N:= N/2;
        if rem(0) then V:= V+U;
        U:= U/2.0;
until   N=0;
return V;
];

int N;
for N:= 0 to 10-1 do
        [IntOut(0, N);  RlOut(0, VdC(N));  CrLf(0)]</syntaxhighlight>
{{out}}
<pre>
0    0.00000
1    0.50000
2    0.25000
3    0.75000
4    0.12500
5    0.62500
6    0.37500
7    0.87500
8    0.06250
9    0.56250
</pre>

=={{header|zkl}}==
{{trans|Python}}
<syntaxhighlight lang="zkl">fcn vdc(n,base=2){
   vdc:=0.0; denom:=1;
   while(n){ reg remainder;
      denom *= base;
      n, remainder = n.divr(base);
      vdc += (remainder.toFloat() / denom);
   }
   vdc
}</syntaxhighlight>
{{trans|Ruby}}
<syntaxhighlight lang="zkl">fcn vdc(n,base=2){
   str:=n.toString(base).reverse();
   str.toInt(base).toFloat()/(base.toFloat().pow(str.len()))
}</syntaxhighlight>
{{out}}
<pre>
[0..10].apply(vdcR).println("base 2");
L(0,0.5,0.25,0.75,0.125,0.625,0.375,0.875,0.0625,0.5625,0.3125)base 2

[0..10].apply(vdc.fp1(3)).println("base 3");
L(0,0.333333,0.666667,0.111111,0.444444,0.777778,0.222222,0.555556,0.888889,0.037037,0.37037)base 3
</pre>