Symmetric difference: Difference between revisions
Content deleted Content added
No edit summary |
PascalABC.NET |
||
| (281 intermediate revisions by more than 100 users not shown) | |||
Line 1:
{{task|Discrete math}}
;Task
Given two [[set]]s ''A'' and ''B'', compute <math>(A \setminus B) \cup (B \setminus A).</math>
That is, enumerate the items that are in ''A'' or ''B'' but not both. This set is called the [[wp:Symmetric difference|symmetric difference]] of ''A'' and ''B''.
In other words: <math>(A \cup B) \setminus (A \cap B)</math> (the set of items that are in at least one of ''A'' or ''B'' minus the set of items that are in both ''A'' and ''B'').
Optionally, give the individual differences (<math>A \setminus B</math> and <math>B \setminus A</math>) as well.
;Test cases
A = {John, Bob, Mary, Serena}
B = {Jim, Mary, John, Bob}
;Notes
# If your code uses lists of items to represent sets then ensure duplicate items in lists are correctly handled. For example two lists representing sets of <code>a = ["John", "Serena", "Bob", "Mary", "Serena"]</code> and <code>b = ["Jim", "Mary", "John", "Jim", "Bob"]</code> should produce the result of just two strings: <code>["Serena", "Jim"]</code>, in any order.
# In the mathematical notation above <code>A \ B</code> gives the set of items in A that are not in B; <code>A ∪ B</code> gives the set of items in both A and B, (their ''union''); and <code>A ∩ B</code> gives the set of items that are in both A and B (their ''intersection'').
<br><br>
=={{header|11l}}==
{{trans|Python}}
<syntaxhighlight lang="11l">V setA = Set([‘John’, ‘Bob’, ‘Mary’, ‘Serena’])
V setB = Set([‘Jim’, ‘Mary’, ‘John’, ‘Bob’])
print(setA.symmetric_difference(setB))
print(setA - setB)
print(setB - setA)</syntaxhighlight>
{{out}}
<pre>
Set([Jim, Serena])
Set([Serena])
Set([Jim])
</pre>
=={{header|Action!}}==
The user must type in the monitor the following command after compilation and before running the program!<pre>SET EndProg=*</pre>
{{libheader|Action! Tool Kit}}
<syntaxhighlight lang="action!">CARD EndProg ;required for ALLOCATE.ACT
INCLUDE "D2:ALLOCATE.ACT" ;from the Action! Tool Kit. You must type 'SET EndProg=*' from the monitor after compiling, but before running this program!
DEFINE PTR="CARD"
DEFINE NODE_SIZE="6"
TYPE SetNode=[PTR data,prv,nxt]
TYPE SetInfo=[PTR name,begin,end]
PROC PrintSet(SetInfo POINTER s)
SetNode POINTER n
CHAR ARRAY a
n=s.begin
PrintF("%S=(",s.name)
WHILE n
DO
Print(n.data)
a=n.data
IF n.nxt THEN
Print(", ")
FI
n=n.nxt
OD
PrintE(")")
RETURN
PROC CreateSet(SetInfo POINTER s CHAR ARRAY n)
s.name=n
s.begin=0
s.end=0
RETURN
PTR FUNC Find(SetInfo POINTER s CHAR ARRAY v)
SetNode POINTER n
n=s.begin
WHILE n
DO
IF SCompare(v,n.data)=0 THEN
RETURN (n)
FI
n=n.nxt
OD
RETURN (0)
BYTE FUNC Contains(SetInfo POINTER s CHAR ARRAY v)
SetNode POINTER n
n=Find(s,v)
IF n=0 THEN
RETURN (0)
FI
RETURN (1)
PROC Append(SetInfo POINTER s CHAR ARRAY v)
SetNode POINTER n,tmp
IF Contains(s,v) THEN RETURN FI
n=Alloc(NODE_SIZE)
n.data=v
n.prv=s.end
n.nxt=0
IF s.end THEN
tmp=s.end tmp.nxt=n
ELSE
s.begin=n
FI
s.end=n
RETURN
PROC Remove(SetInfo POINTER s CHAR ARRAY v)
SetNode POINTER n,prev,next
n=Find(s,v)
IF n=0 THEN RETURN FI
prev=n.prv
next=n.nxt
Free(n,NODE_SIZE)
IF prev THEN
prev.nxt=next
ELSE
s.begin=next
FI
IF next THEN
next.prv=prev
ELSE
s.end=prev
FI
RETURN
PROC AppendSet(SetInfo POINTER s,other)
SetNode POINTER n
n=other.begin
WHILE n
DO
Append(s,n.data)
n=n.nxt
OD
RETURN
PROC RemoveSet(SetInfo POINTER s,other)
SetNode POINTER n
n=other.begin
WHILE n
DO
Remove(s,n.data)
n=n.nxt
OD
RETURN
PROC Clear(SetInfo POINTER s)
SetNode POINTER n
DO
n=s.begin
IF n=0 THEN RETURN FI
Remove(s,n.data)
OD
RETURN
PROC Union(SetInfo POINTER a,b,res)
Clear(res)
AppendSet(res,a)
AppendSet(res,b)
RETURN
PROC Difference(SetInfo POINTER a,b,res)
Clear(res)
AppendSet(res,a)
RemoveSet(res,b)
RETURN
PROC SymmetricDifference(SetInfo POINTER a,b,res)
SetInfo tmp1,tmp2
CreateSet(tmp1,"")
CreateSet(tmp2,"")
Difference(a,b,tmp1)
Difference(b,a,tmp2)
Union(tmp1,tmp2,res)
Clear(tmp1)
Clear(tmp2)
RETURN
PROC TestSymmetricDifference(SetInfo POINTER a,b,res)
SymmetricDifference(a,b,res)
PrintF("%S XOR %S: ",a.name,b.name)
PrintSet(res)
RETURN
PROC TestDifference(SetInfo POINTER a,b,res)
Difference(a,b,res)
PrintF("%S-%S: ",a.name,b.name)
PrintSet(res)
RETURN
PROC Main()
SetInfo s1,s2,s3
Put(125) PutE() ;clear screen
AllocInit(0)
CreateSet(s1,"A")
CreateSet(s2,"B")
CreateSet(s3,"C")
Append(s1,"John") Append(s1,"Bob")
Append(s1,"Mary") Append(s1,"Serena")
Append(s2,"Jim") Append(s2,"Mary")
Append(s2,"John") Append(s2,"Bob")
PrintSet(s1) PrintSet(s2)
PutE()
TestSymmetricDifference(s1,s2,s3)
TestDifference(s1,s2,s3)
TestDifference(s2,s1,s3)
Clear(s1)
Clear(s2)
Clear(s3)
RETURN</syntaxhighlight>
{{out}}
[https://gitlab.com/amarok8bit/action-rosetta-code/-/raw/master/images/Symmetric_difference.png Screenshot from Atari 8-bit computer]
<pre>
A=(John, Bob, Mary, Serena)
B=(Jim, Mary, John, Bob)
A XOR B: C=(Serena, Jim)
A-B: C=(Serena)
B-A: C=(Jim)
</pre>
=={{header|Ada}}==
Ada has the lattice operation '''xor''' predefined on Boolean, modular types, 1D arrays, set implementations from the standard library. The provided solution uses arrays:
<syntaxhighlight lang="ada">with Ada.Text_IO; use Ada.Text_IO;
procedure Test_XOR is
type Person is (John, Bob, Mary, Serena, Jim);
type Group is array (Person) of Boolean;
procedure Put (Set : Group) is
First : Boolean := True;
begin
for I in Set'Range loop
if Set (I) then
if First then
First := False;
else
Put (',');
end if;
Put (Person'Image (I));
end if;
end loop;
end Put;
A : Group := (John | Bob | Mary | Serena => True, others => False);
B : Group := (Jim | Mary | John | Bob => True, others => False);
begin
Put ("A xor B = "); Put (A xor B); New_Line;
Put ("A - B = "); Put (A and not B); New_Line;
Put ("B - A = "); Put (B and not A); New_Line;
end Test_XOR;</syntaxhighlight>
Sample output:
<pre>
A xor B = SERENA,JIM
A - B = SERENA
B - A = JIM
</pre>
=={{header|Aime}}==
<syntaxhighlight lang="aime">show_sdiff(record u, x)
{
record r;
text s;
r.copy(u);
for (s in x) {
if (r.key(s)) {
r.delete(s);
} else {
r.p_integer(s, 0);
}
}
r.vcall(o_, 0, "\n");
}
new_set(...)
{
record r;
ucall(r_p_integer, 1, r, 0);
r;
}
main(void)
{
show_sdiff(new_set("John", "Bob", "Mary", "Serena"),
new_set("Jim", "Mary", "John", "Bob"));
0;
}</syntaxhighlight>
{{out}}
<pre>Jim
Serena</pre>
=={{header|ALGOL 68}}==
{{works with|ALGOL 68G|Any - tested with release 2.8.3.win32}}
Uses the associative array implementations in ALGOL_68/prelude.
<syntaxhighlight lang="algol68"># symetric difference using associative arrays to represent the sets #
# include the associative array code for string keys and values #
PR read "aArray.a68" PR
# adds the elements of s to the associative array a, #
# the elements will have empty strings for values #
OP // = ( REF AARRAY a, []STRING s )REF AARRAY:
BEGIN
FOR s pos FROM LWB s TO UPB s DO
a // s[ s pos ] := ""
OD;
a
END # // # ;
# returns an AARRAY containing the elements of a that aren't in b #
OP - = ( REF AARRAY a, REF AARRAY b )REF AARRAY:
BEGIN
REF AARRAY result := INIT HEAP AARRAY;
REF AAELEMENT e := FIRST a;
WHILE e ISNT nil element DO
IF NOT ( b CONTAINSKEY key OF e ) THEN
result // key OF e := value OF e
FI;
e := NEXT a
OD;
result
END # - # ;
# returns an AARRAY containing the elements of a and those of b #
# i.e. in set terms a UNION b #
OP + = ( REF AARRAY a, REF AARRAY b )REF AARRAY:
BEGIN
REF AARRAY result := INIT HEAP AARRAY;
REF AAELEMENT e := FIRST a;
WHILE e ISNT nil element DO
result // key OF e := value OF e;
e := NEXT a
OD;
e := FIRST b;
WHILE e ISNT nil element DO
result // key OF e := value OF e;
e := NEXT b
OD;
result
END # + # ;
# construct the associative arrays for the task #
REF AARRAY a := INIT LOC AARRAY;
REF AARRAY b := INIT LOC AARRAY;
a // []STRING( "John", "Bob", "Mary", "Serena" );
b // []STRING( "Jim", "Mary", "John", "Bob" );
# find and show the symetric difference of a and b #
REF AARRAY c := ( a - b ) + ( b - a );
REF AAELEMENT e := FIRST c;
WHILE e ISNT nil element DO
print( ( " ", key OF e ) );
e := NEXT c
OD;
print( ( newline ) )</syntaxhighlight>
{{out}}
<pre>
Serena Jim
</pre>
=={{header|Amazing Hopper}}==
<syntaxhighlight lang="c">
#include <basico.h>
algoritmo
matrices (A, B)
"John", "Bob", "Mary", "Serena", enlistar en 'A'
"Jim", "Mary", "John", "Bob", enlistar en 'B'
" A XOR B: {", diferencia simétrica(A,B), "}\n"
" A \ B: {", diferencia(A,B), "}\n"
" B \ A: {", diferencia(B,A), "}\n"
imprimir
terminar
</syntaxhighlight>
{{out}}
<pre>
A XOR B: {Jim,Serena}
A \ B: {Serena}
B \ A: {Jim}
</pre>
=={{header|Apex}}==
<syntaxhighlight lang="java">Set<String> setA = new Set<String>{'John', 'Bob', 'Mary', 'Serena'};
Set<String> setB = new Set<String>{'Jim', 'Mary', 'John', 'Bob'};
// Option 1
Set<String> notInSetA = setB.clone();
notInSetA.removeAll(setA);
Set<String> notInSetB = setA.clone();
notInSetB.removeAll(setB);
Set<String> symmetricDifference = new Set<String>();
symmetricDifference.addAll(notInSetA);
symmetricDifference.addAll(notInSetB);
// Option 2
Set<String> union = setA.clone();
union.addAll(setB);
Set<String> intersection = setA.clone();
intersection.retainAll(setB);
Set<String> symmetricDifference2 = union.clone();
symmetricDifference2.removeAll(intersection);
System.debug('Not in set A: ' + notInSetA);
System.debug('Not in set B: ' + notInSetB);
System.debug('Symmetric Difference: ' + symmetricDifference);
System.debug('Symmetric Difference 2: ' + symmetricDifference2);</syntaxhighlight>
{{out}}
<pre>Not in set A: {Jim}
Not in set B: {Serena}
Symmetric Difference: {Jim, Serena}
Symmetric Difference 2: {Jim, Serena}</pre>
=={{header|APL}}==
{{works with|Dyalog APL}}
<syntaxhighlight lang="apl">symdiff ← ∪~∩</syntaxhighlight>
{{out}}
<pre> 'John' 'Bob' 'Mary' 'Serena' symdiff 'Jim' 'Mary' 'John' 'Bob'
Serena Jim </pre>
=={{header|AppleScript}}==
===Functional===
{{Trans|JavaScript}} (ES6 Functional JS)
<syntaxhighlight lang="applescript">-- SYMMETRIC DIFFERENCE -------------------------------------------
-- symmetricDifference :: [a] -> [a] -> [a]
on symmetricDifference(xs, ys)
union(difference(xs, ys), difference(ys, xs))
end symmetricDifference
-- TEST -----------------------------------------------------------
on run
set a to ["John", "Serena", "Bob", "Mary", "Serena"]
set b to ["Jim", "Mary", "John", "Jim", "Bob"]
symmetricDifference(a, b)
--> {"Serena", "Jim"}
end run
-- GENERIC FUNCTIONS ----------------------------------------------
-- delete :: Eq a => a -> [a] -> [a]
on |delete|(x, xs)
set mbIndex to elemIndex(x, xs)
set lng to length of xs
if mbIndex is not missing value then
if lng > 1 then
if mbIndex = 1 then
items 2 thru -1 of xs
else if mbIndex = lng then
items 1 thru -2 of xs
else
tell xs to items 1 thru (mbIndex - 1) & ¬
items (mbIndex + 1) thru -1
end if
else
{}
end if
else
xs
end if
end |delete|
-- difference :: [a] -> [a] -> [a]
on difference(xs, ys)
script
on |λ|(a, y)
if a contains y then
my |delete|(y, a)
else
a
end if
end |λ|
end script
foldl(result, xs, ys)
end difference
-- elemIndex :: a -> [a] -> Maybe Int
on elemIndex(x, xs)
set lng to length of xs
repeat with i from 1 to lng
if x = (item i of xs) then return i
end repeat
return missing value
end elemIndex
-- foldl :: (a -> b -> a) -> a -> [b] -> a
on foldl(f, startValue, xs)
tell mReturn(f)
set v to startValue
set lng to length of xs
repeat with i from 1 to lng
set v to |λ|(v, item i of xs, i, xs)
end repeat
return v
end tell
end foldl
-- Lift 2nd class handler function into 1st class script wrapper
-- mReturn :: Handler -> Script
on mReturn(f)
if class of f is script then
f
else
script
property |λ| : f
end script
end if
end mReturn
-- nub :: [a] -> [a]
on nub(xs)
if (length of xs) > 1 then
set x to item 1 of xs
[x] & nub(|delete|(x, items 2 thru -1 of xs))
else
xs
end if
end nub
-- union :: [a] -> [a] -> [a]
on union(xs, ys)
script flipDelete
on |λ|(xs, x)
my |delete|(x, xs)
end |λ|
end script
set sx to nub(xs)
sx & foldl(flipDelete, nub(ys), sx)
end union</syntaxhighlight>
{{Out}}
<syntaxhighlight lang="applescript">{"Serena", "Jim"}</syntaxhighlight>
===Some alternatives===
There are several ways to approach this problem. Vanilla AppleScript doesn't do sets, but the following returns the required results:
<syntaxhighlight lang="applescript">on symmetricDifference(a, b)
set output to {}
repeat 2 times
repeat with thisItem in a
set thisItem to thisItem's contents
tell {thisItem}
if (not ((it is in b) or (it is in output))) then set end of output to thisItem
end tell
end repeat
set {a, b} to {b, a}
end repeat
return output
end symmetricDifference
on task()
set a to {"John", "Serena", "Bob", "Mary", "Serena"}
set b to {"Jim", "Mary", "John", "Jim", "Bob"}
return symmetricDifference(a, b)
end task
task()</syntaxhighlight>
{{output}}
<syntaxhighlight lang="applescript">{"Serena", "Jim"}</syntaxhighlight>
AppleScriptObjC gives access to the Foundation framework's NSSet classes, whose mutable variety has relevant methods. A symmetricDifference() handler implementing (A ∖ B) ∪ (B ∖ A) might be:
<syntaxhighlight lang="applescript">use AppleScript version "2.4" -- OS X 10.10 (Yosemite) or later
use framework "Foundation"
on symmetricDifference(a, b)
set a to current application's class "NSSet"'s setWithArray:(a)
set b to current application's class "NSMutableSet"'s setWithArray:(b)
set output to a's mutableCopy()
tell output to minusSet:(b)
tell b to minusSet:(a)
tell output to unionSet:(b)
return output's allObjects() as list
end symmetricDifference</syntaxhighlight>
And for (A ∪ B) ∖ (A ∩ B):
<syntaxhighlight lang="applescript">use AppleScript version "2.4" -- OS X 10.10 (Yosemite) or later
use framework "Foundation"
on symmetricDifference(a, b)
set a to current application's class "NSSet"'s setWithArray:(a)
set b to current application's class "NSMutableSet"'s setWithArray:(b)
set output to a's mutableCopy()
tell output to unionSet:(b)
tell b to intersectSet:(a)
tell output to minusSet:(b)
return output's allObjects() as list
end symmetricDifference</syntaxhighlight>
It's also possible in ASObjC to filter arrays or sets if you're so inclined:
<syntaxhighlight lang="applescript">use AppleScript version "2.4" -- OS X 10.10 (Yosemite) or later
use framework "Foundation"
on symmetricDifference(a, b)
set unionArray to (current application's class "NSArray"'s arrayWithArray:({a, b}))'s ¬
valueForKeyPath:("@distinctUnionOfArrays.self")
set filter to current application's class "NSPredicate"'s ¬
predicateWithFormat_("!((self IN %@) && (self IN %@))", a, b)
return (unionArray's filteredArrayUsingPredicate:(filter)) as list
end symmetricDifference</syntaxhighlight>
=={{header|Arturo}}==
<syntaxhighlight lang="rebol">a: ["John" "Bob" "Mary" "Serena"]
b: ["Jim" "Mary" "John" "Bob"]
print difference.symmetric a b</syntaxhighlight>
{{out}}
<pre>Serena Jim</pre>
=={{header|AutoHotkey}}==
<syntaxhighlight lang="autohotkey">setA = John, Bob, Mary, Serena
setB = Jim, Mary, John, Bob
MsgBox,, Singles, % SymmetricDifference(setA, setB)
setA = John, Serena, Bob, Mary, Serena
setB = Jim, Mary, John, Jim, Bob
MsgBox,, Duplicates, % SymmetricDifference(setA, setB)
;---------------------------------------------------------------------------
SymmetricDifference(A, B) { ; returns the symmetric difference of A and B
;---------------------------------------------------------------------------
StringSplit, A_, A, `,, %A_Space%
Loop, %A_0%
If Not InStr(B, A_%A_Index%)
And Not InStr(Result, A_%A_Index%)
Result .= A_%A_Index% ", "
StringSplit, B_, B, `,, %A_Space%
Loop, %B_0%
If Not InStr(A, B_%A_Index%)
And Not InStr(Result, B_%A_Index%)
Result .= B_%A_Index% ", "
Return, SubStr(Result, 1, -2)
}</syntaxhighlight>
Message boxes show:
<pre>Singles
---------------------------
Serena, Jim
OK</pre>
<pre>Duplicates
---------------------------
Serena, Jim
OK</pre>
=={{header|AWK}}==
<syntaxhighlight lang="awk">
# syntax: GAWK -f SYMMETRIC_DIFFERENCE.AWK
BEGIN {
load("John,Bob,Mary,Serena",A)
load("Jim,Mary,John,Bob",B)
show("A \\ B",A,B)
show("B \\ A",B,A)
printf("symmetric difference: ")
for (i in C) {
if (!(i in A && i in B)) {
printf("%s ",i)
}
}
printf("\n")
exit(0)
}
function load(str,arr, i,n,temp) {
n = split(str,temp,",")
for (i=1; i<=n; i++) {
arr[temp[i]]
C[temp[i]]
}
}
function show(str,a,b, i) {
printf("%s: ",str)
for (i in a) {
if (!(i in b)) {
printf("%s ",i)
}
}
printf("\n")
}
</syntaxhighlight>
<p>output:</p>
<pre>
A \ B: Serena
B \ A: Jim
symmetric difference: Serena Jim
</pre>
=={{header|BBC BASIC}}==
Here sets are represented as integers, hence there are a maximum of 32 elements in a set.
<syntaxhighlight lang="bbcbasic"> DIM list$(4)
list$() = "Bob", "Jim", "John", "Mary", "Serena"
setA% = %11101
PRINT "Set A: " FNlistset(list$(), setA%)
setB% = %01111
PRINT "Set B: " FNlistset(list$(), setB%)
REM Compute symmetric difference:
setC% = setA% EOR setB%
PRINT '"Symmetric difference: " FNlistset(list$(), setC%)
REM Optional:
PRINT "Set A \ Set B: " FNlistset(list$(), setA% AND NOT setB%)
PRINT "Set B \ Set A: " FNlistset(list$(), setB% AND NOT setA%)
END
DEF FNlistset(list$(), set%)
LOCAL i%, o$
FOR i% = 0 TO 31
IF set% AND 1 << i% o$ += list$(i%) + ", "
NEXT
= LEFT$(LEFT$(o$))</syntaxhighlight>
'''Output:'''
<pre>
Set A: Bob, John, Mary, Serena
Set B: Bob, Jim, John, Mary
Symmetric difference: Jim, Serena
Set A \ Set B: Serena
Set B \ Set A: Jim
</pre>
=={{header|Bracmat}}==
Walk through the concatenation of the two lists, using backtracking (forced by the ~ operator).
If an element is in both lists, or if the element already is in the accumulated result <code>symdiff</code>, continue. Otherwise add the element to <code>symdiff</code>. When all elements are done and backtracking therefore finally fails, return the contents of <code>symdiff</code>. The flag <code>%</code> in the pattern <code>%@?x</code> ensures that only nontrivial elements (i.e. non-empty strings in this case) are matched. The <code>@</code> flag ensures that at most one string is matched. Together these flags ensure that exactly one element is matched.
<syntaxhighlight lang="bracmat">(SymmetricDifference=
A B x symdiff
. !arg:(?A.?B)
& :?symdiff
& ( !A !B
: ?
( %@?x
& ( !A:? !x ?&!B:? !x ?
| !symdiff:? !x ?
| !symdiff !x:?symdiff
)
& ~
)
?
| !symdiff
));</syntaxhighlight>
Run:
<syntaxhighlight lang="bracmat">SymmetricDifference$(john serena bob mary serena.jim mary john jim bob)</syntaxhighlight>
Output:
<syntaxhighlight lang="bracmat">serena jim</syntaxhighlight>
=={{header|C}}==
Simple method:
<syntaxhighlight lang="c">#include <stdio.h>
#include <string.h>
const char *A[] = { "John", "Serena", "Bob", "Mary", "Serena" };
const char *B[] = { "Jim", "Mary", "John", "Jim", "Bob" };
#define LEN(x) sizeof(x)/sizeof(x[0])
/* null duplicate items */
void uniq(const char *x[], int len)
{
int i, j;
for (i = 0; i < len; i++)
for (j = i + 1; j < len; j++)
if (x[j] && x[i] && !strcmp(x[i], x[j])) x[j] = 0;
}
int in_set(const char *const x[], int len, const char *match)
{
int i;
for (i = 0; i < len; i++)
if (x[i] && !strcmp(x[i], match))
return 1;
return 0;
}
/* x - y */
void show_diff(const char *const x[], int lenx, const char *const y[], int leny)
{
int i;
for (i = 0; i < lenx; i++)
if (x[i] && !in_set(y, leny, x[i]))
printf(" %s\n", x[i]);
}
/* X ^ Y */
void show_sym_diff(const char *const x[], int lenx, const char *const y[], int leny)
{
show_diff(x, lenx, y, leny);
show_diff(y, leny, x, lenx);
}
int main()
{
uniq(A, LEN(A));
uniq(B, LEN(B));
printf("A \\ B:\n"); show_diff(A, LEN(A), B, LEN(B));
printf("\nB \\ A:\n"); show_diff(B, LEN(B), A, LEN(A));
printf("\nA ^ B:\n"); show_sym_diff(A, LEN(A), B, LEN(B));
return 0;
}</syntaxhighlight>output
<pre>
A \ B:
Serena
B \ A:
Jim
A ^ B:
Serena
Jim
</pre>
If you prefer something elaborate:
<syntaxhighlight lang="c">#include <assert.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
const char *mary
const char *bob
const char *jim
const char *john
const char *serena
const char *setA[] = {john,bob,mary,serena};
const char *setB[] = {jim,mary,john,bob};
#define XSET(j) j, (sizeof(j)/sizeof(
#define TALLOC(n,typ)
typedef enum {
Line 47 ⟶ 875:
* f determinse whether it is a symmetric difference, or normal difference
* * * * * * * * * * * * * * * * * * * * **/
const char ** symmdiff( int *sym_size, EsdFunction f, const char
{
int union_size;
int max_union_size;
int diff_size;
const char **union_set;
const char **diff_set;
int *union_xor;
int ix, ixu;
max_union_size = setAsize + setBsize;
union_set = TALLOC(max_union_size, const char *);
union_xor = TALLOC(max_union_size, int);
Line 74 ⟶ 902:
if (ixu < union_size) { /* already in union */
union_xor[ixu] = 1-union_xor[ixu];
diff_size
}
else { /* not already in union -add */
Line 80 ⟶ 908:
union_set[ixu] = setB[ix];
union_xor[ixu] = 1;
union_size
diff_size
}
}
}
/* Put results in symdiff set */
diff_set = TALLOC(diff_size, const char *);
ix = 0;
for (ixu=0; ixu<union_size; ixu++) {
if (union_xor[ixu]
if (ix == diff_size) {
printf("Short of space in diff_set\n");
Line 104 ⟶ 932:
}
/* isSet tests that elements of list are unique, that is, that the list is a
* mathematical set. The uniqueness test implemented here is strcmp. */
int isSet(const char *list[], int lsize)
{
int i, j;
const char *e;
if (lsize == 0) {
return 1;
}
for (i = lsize-1; i>0; i--) {
e = list[i];
for (j = i-1; j>=0; j--) {
if (strcmp(list[j], e) == 0) {
return 0;
}
}
}
return 1;
}
void printSet (const char
{
int ix;
printf(
for (ix=0;ix<ssize; ix++) {
printf( "%s ", set[ix]);
Line 115 ⟶ 962:
}
int main(
{
const char **symset;
int sysize;
/* Validate precondition stated by task, that inputs are sets. */
assert(isSet(XSET(setA)));
assert(isSet(XSET(setB)));
printf ("A symmdiff B");
Line 133 ⟶ 984:
return 0;
}</
Output
<pre>
A symmdiff B = {Serena Jim }
A - B = {Serena }
B - A = {Jim }
</pre>
=={{header|C sharp|C#}}==
<syntaxhighlight lang="csharp">using System;
using System.Collections.Generic;
using System.Linq;
namespace RosettaCode.SymmetricDifference
{
public static class IEnumerableExtension
{
public static IEnumerable<T> SymmetricDifference<T>(this IEnumerable<T> @this, IEnumerable<T> that)
{
return @this.Except(that).Concat(that.Except(@this));
}
}
class Program
{
static void Main()
{
var a = new[] { "John", "Bob", "Mary", "Serena" };
var b = new[] { "Jim", "Mary", "John", "Bob" };
foreach (var element in a.SymmetricDifference(b))
{
Console.WriteLine(element);
}
}
}
}</syntaxhighlight>
Output:
<pre>
Serena
Jim
</pre>
=={{header|C++}}==
<
#include <set>
#include <algorithm>
#include <iterator>
#include <string>
using namespace std;
int main( ) {
string setA[
string setB[
set<string>
firstSet( setA , setA + 4 ),
secondSet( setB , setB + 4 ),
symdiff;
set_symmetric_difference( firstSet.begin(), firstSet.end(),
secondSet.begin(), secondSet.end(),
inserter( symdiff, symdiff.end() ) );
copy( symdiff.begin(), symdiff.end(), ostream_iterator<string>( cout , " " ) );
cout << endl;
return 0;
}</syntaxhighlight>
Output:
Jim Serena
=={{header|Clojure}}==
<syntaxhighlight lang="clojure">(use '[clojure.set])
(defn symmetric-difference [s1 s2]
(union (difference s1 s2) (difference s2 s1)))
(symmetric-difference #{:john :bob :mary :serena} #{:jim :mary :john :bob})</syntaxhighlight>
=={{header|Common Lisp}}==
<syntaxhighlight lang="lisp">(set-exclusive-or
(remove-duplicates '(John Serena Bob Mary Serena))
(remove-duplicates '(Jim Mary John Jim Bob)))</syntaxhighlight>
Output:
(JIM SERENA)
=={{header|D}}==
Generic version.
<syntaxhighlight lang="d">import std.stdio, std.algorithm, std.array;
struct Set(T) {
immutable T[] items;
Set opSub(in Set other) const pure nothrow {
return items.filter!(x => !other.items.canFind(x)).array.Set;
}
Set opAdd(in Set other) const pure nothrow {
return Set(this.items ~ (other - this).items);
}
}
Set!T symmetricDifference(T)(in Set!T left, in Set!T right)
pure nothrow {
return (left - right) + (right - left);
}
void main() {
immutable A = ["John", "Bob", "Mary", "Serena"].Set!string;
immutable B = ["Jim", "Mary", "John", "Bob"].Set!string;
writeln(" A\\B: ", (A - B).items);
writeln(" B\\A: ", (B - A).items);
writeln("A symdiff B: ", symmetricDifference(A, B).items);
}</syntaxhighlight>
{{out}}
<pre> A\B: ["Serena"]
B\A: ["Jim"]
A symdiff B: ["Serena", "Jim"]</pre>
=={{header|Datalog}}==
Implemented using Souffle.
<syntaxhighlight lang="datalog">.decl A(text: symbol)
.decl B(text: symbol)
.decl SymmetricDifference(text: symbol)
.output SymmetricDifference
A("this").
A("is").
A("a").
A("test").
B("also").
B("part").
B("of").
B("a").
B("test").
SymmetricDifference(x) :- A(x), !B(x).
SymmetricDifference(x) :- B(x), !A(x).</syntaxhighlight>
{{out}}
<pre>
this
is
also
part
of
</pre>
=={{header|Delphi}}==
{{libheader| System.Typinfo}}
{{Trans|Pascal}}
Small variation of pascal.
<syntaxhighlight lang="delphi">
PROGRAM Symmetric_difference;
uses
System.Typinfo;
TYPE
TName = (Bob, Jim, John, Mary, Serena);
TList = SET OF TName;
TNameHelper = record helper for TName
FUNCTION ToString(): string;
end;
{ TNameHlper }
FUNCTION TNameHelper.ToString: string;
BEGIN
Result := GetEnumName(TypeInfo(TName), Ord(self));
END;
PROCEDURE Put(txt: String; ResSet: TList);
VAR
I: TName;
BEGIN
Write(txt);
FOR I IN ResSet DO
Write(I.ToString, ' ');
WriteLn;
END;
VAR
ListA: TList = [John, Bob, Mary, Serena];
ListB: TList = [Jim, Mary, John, Bob];
BEGIN
Put('ListA -> ', ListA);
Put('ListB -> ', ListB);
Put('ListA >< ListB -> ', (ListA - ListB) + (ListB - ListA));
Put('ListA - ListB -> ', ListA - ListB);
Put('ListB - ListA -> ', ListB - ListA);
ReadLn;
END.</syntaxhighlight>
'''Delphi/Object Pascal actually has a 'Symmetric Difference' operator `> <`: '''
<syntaxhighlight lang="pascal">
program SymmetricDifference;
type
charSet = set of Char;
var
s1, s2, s3: charSet;
ch: char;
begin
s1 := ['a', 'b', 'c', 'd'];
s2 := ['c', 'd', 'e', 'f'];
s3 := s1 >< s2;
for ch in s3 do
write(ch, ' ');
writeLn;
end.
</syntaxhighlight>
Output:
<pre>
a b e f
</pre>
=={{header|Déjà Vu}}==
Déjà Vu has no real set type. Instead, it uses a dictionary whose keys are the set values. The <code>set{</code> constructor uses <code>true</code> as a dummy value, and sets <code>false</code> as a dummy value.
<syntaxhighlight lang="dejavu">set :setA set{ :John :Bob :Mary :Serena }
set :setB set{ :Jim :Mary :John :Bob }
symmetric-difference A B:
}
for a in keys A:
if not has B a:
a
for b in keys B:
if not has A b:
b
set{
!. symmetric-difference setA setB</syntaxhighlight>
{{out}}
<pre>set{ :Serena :Jim }</pre>
=={{header|E}}==
<syntaxhighlight lang="e">? def symmDiff(a, b) { return (a &! b) | (b &! a) }
# value: <symmDiff>
? symmDiff(["John", "Bob", "Mary", "Serena"].asSet(), ["Jim", "Mary", "John", "Bob"].asSet())
# value: ["Jim", "Serena"].asSet()</syntaxhighlight>
=={{header|EasyLang}}==
<syntaxhighlight>
a$[] = [ "John" "Bob" "Mary" "Serena" ]
b$[] = [ "Jim" "Mary" "John" "Bob" ]
#
for i to 2
for a$ in a$[]
for b$ in b$[]
if a$ = b$
a$ = ""
break 1
.
.
if a$ <> ""
c$[] &= a$
.
.
swap a$[] b$[]
.
print c$[]
</syntaxhighlight>
=={{header|Eiffel}}==
<syntaxhighlight lang="eiffel">note
description: "Summary description for {SYMETRIC_DIFFERENCE_EXAMPLE}."
URI: "http://rosettacode.org/wiki/Symmetric_difference"
class
SYMETRIC_DIFFERENCE_EXAMPLE
create
make
feature {NONE} -- Initialization
make
local
a,a1,b,b1: ARRAYED_SET [STRING]
do
create a.make (4)
create b.make (4)
a.compare_objects
b.compare_objects
a.put ("John")
a.put ("Bob")
a.put ("Mary")
a.put ("Serena")
create a1.make (4)
a1.copy (a)
b.put ("Jim")
b.put ("Mary")
b.put ("John")
b.put ("Bob")
create b1.make (4)
b1.copy (b)
a1.subtract (b1)
b.subtract (a)
a1.merge (b)
across a1 as c loop
print (" " + c.item)
end
end
end</syntaxhighlight>
=={{header|Elixir}}==
{{works with|Elixir|1.2}}
<syntaxhighlight lang="elixir">iex(1)> a = ~w[John Bob Mary Serena] |> MapSet.new
#MapSet<["Bob", "John", "Mary", "Serena"]>
iex(2)> b = ~w[Jim Mary John Bob] |> MapSet.new
#MapSet<["Bob", "Jim", "John", "Mary"]>
iex(3)> sym_dif = fn(a,b) -> MapSet.difference(MapSet.union(a,b), MapSet.intersection(a,b)) end
#Function<12.54118792/2 in :erl_eval.expr/5>
iex(4)> sym_dif.(a,b)
#MapSet<["Jim", "Serena"]></syntaxhighlight>
=={{header|Erlang}}==
<syntaxhighlight lang="erlang">%% Implemented by Arjun Sunel
-module(symdiff).
-export([main/0]).
main() ->
SetA = sets:from_list(["John","Bob","Mary","Serena"]),
SetB = sets:from_list(["Jim","Mary","John","Bob"]),
AUnionB = sets:union(SetA,SetB),
AIntersectionB = sets:intersection(SetA,SetB),
SymmDiffAB = sets:subtract(AUnionB,AIntersectionB),
sets:to_list(SymmDiffAB).
</syntaxhighlight>
{{out}}
<pre>["Serena","Jim"]
</pre>
=={{header|F Sharp|F#}}==
<syntaxhighlight lang="fsharp">> let a = set ["John"; "Bob"; "Mary"; "Serena"]
let b = set ["Jim"; "Mary"; "John"; "Bob"];;
val a : Set<string> = set ["Bob"; "John"; "Mary"; "Serena"]
val b : Set<string> = set ["Bob"; "Jim"; "John"; "Mary"]
> (a-b) + (b-a);;
val it : Set<string> = set ["Jim"; "Serena"]</syntaxhighlight>
Or, if you don't like the infix operators:
<syntaxhighlight lang="fsharp">> Set.union (Set.difference a b) (Set.difference b a);;
val it : Set<string> = set ["Jim"; "Serena"]</syntaxhighlight>
=={{header|Factor}}==
<syntaxhighlight lang="factor">: symmetric-diff ( a b -- c )
[ diff ] [ swap diff ] 2bi append ;
{ "John" "Bob" "Mary" "Serena" } { "Jim" "Mary" "John" "Bob" } symmetric-diff .</syntaxhighlight>
=={{header|Forth}}==
GForth 0.7.0 tested.
<syntaxhighlight lang="forth">: elm ( n -- ; one cell per set )
[ cell 8 * 1- ] literal umin CREATE 1 swap lshift ,
DOES> ( -- 2^n ) @ ;
: universe ( u "name" -- )
dup 0 DO I elm latest swap LOOP
CREATE dup , 0 DO , LOOP
DOES> ( n a -- ) dup @ tuck cells +
swap 0
DO ( n a' )
over I rshift 1 AND
IF dup @ name>string space type THEN
1 cells -
LOOP 2drop ;
5 universe john bob mary serena jim persons
john bob mary serena or or or
jim mary john bob or or or
2dup xor persons
2dup -1 xor and cr persons
swap -1 xor and cr persons
cr bye
</syntaxhighlight>
Output:
<pre>
$ gforth wrk.fs
serena jim
serena
jim
$
</pre>
=={{header|Fortran}}==
{{works with|Fortran|90 and later}}
<syntaxhighlight lang="fortran">program Symmetric_difference
implicit none
character(6) :: a(4) = (/ "John ", "Bob ", "Mary ", "Serena" /)
character(6) :: b(4) = (/ "Jim ", "Mary ", "John ", "Bob " /)
integer :: i, j
outer1: do i = 1, size(a)
do j = 1, i-1
if(a(i) == a(j)) cycle outer1 ! Do not check duplicate items
end do
if(.not. any(b == a(i))) write(*,*) a(i)
end do outer1
outer2: do i = 1, size(b)
do j = 1, i-1
if(b(i) == b(j)) cycle outer2 ! Do not check duplicate items
end do
if(.not. any(a == b(i))) write(*,*) b(i)
end do outer2
end program</syntaxhighlight>
Output
<pre>
Serena
Jim
</pre>
=={{header|
<syntaxhighlight lang="freebasic">
redim shared as string Result(-1) 'represent our sets as strings;
'this'll do to illustrate the concept
sub sym( A() as string, B() as string )
dim as integer ai, bi, ri
dim as boolean add_it
for ai = lbound(A) to ubound(A)
add_it = true
for bi = lbound(B) to ubound(B)
if A(ai) = B(bi) then
add_it=false
exit for 'if item is common to both lists, don't include it
end if
next bi
if add_it then
for ri = 0 to ubound(Result)
if A(ai) = Result(ri) then
add_it=false
exit for
'if item is already in the result, don't include it again
end if
next ri
end if
if add_it then
redim preserve as string Result(0 to ubound(Result)+1)
Result(ubound(Result)) = A(ai)
end if
next ai
end sub
dim as string A(0 to 3) = {"John", "Bob", "Mary", "Serena"}
dim as string B(0 to 4) = {"Jim", "Mary", "John", "Bob", "Jim"}
'contains a double to show code can handle it
sym(A(), B())
sym(B(), A())
for i as uinteger = 0 to ubound(Result)
print Result(i)
next i
</syntaxhighlight>
{{out}}<pre>Serena
Jim
</pre>
=={{header|Frink}}==
<syntaxhighlight lang="frink">A = new set["John", "Bob", "Mary", "Serena"]
B = new set["Jim", "Mary", "John", "Bob"]
println["Symmetric difference: " + symmetricDifference[A,B]]
println["A - B : " + setDifference[A,B]]
println["B - A : " + setDifference[B,A]]</syntaxhighlight>
{{out}}
<pre>
Symmetric difference: [Jim, Serena]
A - B : [Serena]
B - A : [Jim]
</pre>
=={{header|FutureBasic}}==
<syntaxhighlight lang="futurebasic">
include "NSLog.incl"
local fn SymmetricDifferenceOfSets( setA as CFSetRef, setB as CFSetRef ) as CFSetRef
CFMutableSetRef notInSetA = fn MutableSetWithSet( setB )
MutableSetMinusSet( notInSetA, setA )
CFMutableSetRef notInSetB = fn MutableSetWithSet( setA )
MutableSetMinusSet( notInSetB, setB )
CFMutableSetRef symmetricDifference = fn MutableSetWithSet( notInSetA )
MutableSetUnionSet( symmetricDifference, notInSetB )
end fn = fn SetWithSet( symmetricDifference )
CFSetRef set1, set2
set1 = fn SetWithObjects( @"John", @"Serena", @"Bob", @"Mary", @"Serena", NULL )
set2 = fn SetWithObjects( @"Jim", @"Mary", @"John", @"Jim", @"Bob", NULL )
NSLog( @"Symmetric difference:\n%@", fn SymmetricDifferenceOfSets( set1, set2 ) )
HandleEvents
</syntaxhighlight>
{{output}}
<pre>
Symmetric difference:
{(
Jim,
Serena
)}
</pre>
=={{header|GAP}}==
<syntaxhighlight lang="gap">SymmetricDifference := function(a, b)
return Union(Difference(a, b), Difference(b, a));
end;
a := ["John", "Serena", "Bob", "Mary", "Serena"];
b := ["Jim", "Mary", "John", "Jim", "Bob"];
SymmetricDifference(a,b);
[ "Jim", "Serena" ]</syntaxhighlight>
=={{header|Go}}==
<syntaxhighlight lang="go">package main
import "fmt"
var a = map[string]bool{"John": true, "Bob": true, "Mary": true, "Serena": true}
var b = map[string]bool{"Jim": true, "Mary": true, "John": true, "Bob": true}
func main() {
sd := make(map[string]bool)
for e := range a {
if !b[e] {
sd[e] = true
}
}
for e := range b {
if !a[e] {
sd[e] = true
}
}
fmt.Println(sd)
}</syntaxhighlight>
Output:
<pre>
map[Jim:true Serena:true]
</pre>
Alternatively, the following computes destructively on a. The result is the same.
<syntaxhighlight lang="go">func main() {
for e := range b {
delete(a, e)
}
fmt.Println(a)
}</syntaxhighlight>
=={{header|Groovy}}==
Solution:
<syntaxhighlight lang="groovy">def symDiff = { Set s1, Set s2 ->
assert s1 != null
assert s2 != null
(s1 + s2) - (s1.intersect(s2))
}</syntaxhighlight>
Test:
<syntaxhighlight lang="groovy">Set a = ['John', 'Serena', 'Bob', 'Mary', 'Serena']
Set b = ['Jim', 'Mary', 'John', 'Jim', 'Bob']
assert a.size() == 4
assert a == (['Bob', 'John', 'Mary', 'Serena'] as Set)
assert b.size() == 4
assert b == (['Bob', 'Jim', 'John', 'Mary'] as Set)
def aa = symDiff(a, a)
def ab = symDiff(a, b)
def ba = symDiff(b, a)
def bb = symDiff(b, b)
assert aa.empty
assert bb.empty
assert ab == ba
assert ab == (['Jim', 'Serena'] as Set)
assert ab == (['Serena', 'Jim'] as Set)
println """
a: ${a}
b: ${b}
Symmetric Differences
=====================
a <> a: ${aa}
a <> b: ${ab}
b <> a: ${ba}
b <> b: ${bb}
"""
Set apostles = ['Matthew', 'Mark', 'Luke', 'John', 'Peter', 'Paul', 'Silas']
Set beatles = ['John', 'Paul', 'George', 'Ringo', 'Peter', 'Stuart']
Set csny = ['Crosby', 'Stills', 'Nash', 'Young']
Set ppm = ['Peter', 'Paul', 'Mary']
def AA = symDiff(apostles, apostles)
def AB = symDiff(apostles, beatles)
def AC = symDiff(apostles, csny)
def AP = symDiff(apostles, ppm)
def BA = symDiff(beatles, apostles)
def BB = symDiff(beatles, beatles)
def BC = symDiff(beatles, csny)
def BP = symDiff(beatles, ppm)
def CA = symDiff(csny, apostles)
def CB = symDiff(csny, beatles)
def CC = symDiff(csny, csny)
def CP = symDiff(csny, ppm)
def PA = symDiff(ppm, apostles)
def PB = symDiff(ppm, beatles)
def PC = symDiff(ppm, csny)
def PP = symDiff(ppm, ppm)
assert AB == BA
assert AC == CA
assert AP == PA
assert BC == CB
assert BP == PB
assert CP == PC
println """
apostles: ${apostles}
beatles: ${beatles}
csny: ${csny}
ppm: ${ppm}
Symmetric Differences
=====================
apostles <> apostles: ${AA}
apostles <> beatles: ${AB}
apostles <> csny: ${AC}
apostles <> ppm: ${AP}
beatles <> apostles: ${BA}
beatles <> beatles: ${BB}
beatles <> csny: ${BC}
beatles <> ppm: ${BP}
csny <> apostles: ${CA}
csny <> beatles: ${CB}
csny <> csny: ${CC}
csny <> ppm: ${CP}
ppm <> apostles: ${PA}
ppm <> beatles: ${PB}
ppm <> csny: ${PC}
ppm <> ppm: ${PP}
"""</syntaxhighlight>
Output:
<pre style="height:30ex;overflow:scroll;">a: [Mary, Bob, Serena, John]
b: [Mary, Bob, Jim, John]
Symmetric Differences
=====================
a <> a: []
a <> b: [Jim, Serena]
b <> a: [Jim, Serena]
b <> b: []
apostles: [Paul, Mark, Silas, Peter, Luke, John, Matthew]
beatles: [Paul, Stuart, Ringo, Peter, John, George]
csny: [Crosby, Young, Nash, Stills]
ppm: [Paul, Mary, Peter]
Symmetric Differences
=====================
apostles <> apostles: []
apostles <> beatles: [Mark, Silas, Stuart, Ringo, Luke, Matthew, George]
apostles <> csny: [Paul, Crosby, Mark, Silas, Young, Peter, Luke, John, Matthew, Nash, Stills]
apostles <> ppm: [Mark, Mary, Silas, Luke, John, Matthew]
beatles <> apostles: [Mark, Stuart, Ringo, Silas, Luke, Matthew, George]
beatles <> beatles: []
beatles <> csny: [Paul, Crosby, Stuart, Ringo, Young, Peter, John, Nash, Stills, George]
beatles <> ppm: [Mary, Stuart, Ringo, John, George]
csny <> apostles: [Paul, Crosby, Mark, Silas, Young, Peter, Luke, John, Nash, Stills, Matthew]
csny <> beatles: [Paul, Crosby, Stuart, Ringo, Young, Peter, John, Nash, Stills, George]
csny <> csny: []
csny <> ppm: [Paul, Crosby, Mary, Young, Peter, Nash, Stills]
ppm <> apostles: [Mark, Mary, Silas, Luke, John, Matthew]
ppm <> beatles: [Mary, Stuart, Ringo, John, George]
ppm <> csny: [Paul, Crosby, Mary, Young, Peter, Nash, Stills]
ppm <> ppm: []</pre>
=={{header|Haskell}}==
<syntaxhighlight lang="haskell">import Data.Set
a = fromList ["John", "Bob", "Mary", "Serena"]
b = fromList ["Jim", "Mary", "John", "Bob"]
(-|-) :: Ord a => Set a -> Set a -> Set a
x -|- y = (x \\ y) `union` (y \\ x)
-- Equivalently: (x `union` y) \\ (x `intersect` y)</syntaxhighlight>
Symmetric difference:
<syntaxhighlight lang="haskell">*Main> a -|- b
fromList ["Jim","Serena"]</syntaxhighlight>
Individual differences:
<syntaxhighlight lang="haskell">*Main> a \\ b
fromList ["Serena"]
*Main> b \\ a
fromList ["Jim"]</
=={{header|HicEst}}==
<syntaxhighlight lang="hicest">CALL SymmDiff("John,Serena,Bob,Mary,Serena,", "Jim,Mary,John,Jim,Bob,")
CALL SymmDiff("John,Bob,Mary,Serena,", "Jim,Mary,John,Bob,")
SUBROUTINE SymmDiff(set1, set2)
CHARACTER set1, set2, answer*50
answer = " "
CALL setA_setB( set1, set2, answer )
CALL setA_setB( set2, set1, answer )
WRITE(Messagebox,Name) answer ! answer = "Serena,Jim," in both cases
END
SUBROUTINE setA_setB( set1, set2, differences )
CHARACTER set1, set2, differences, a*100
a = set1
EDIT(Text=a, $inLeXicon=set2) ! eg a <= $John,Serena,$Bob,$Mary,Serena,
EDIT(Text=a, Right="$", Mark1, Right=",", Mark2, Delete, DO) ! Serena,Serena,
EDIT(Text=a, Option=1, SortDelDbls=a) ! Option=1: keep case; Serena,
differences = TRIM( differences ) // a
END</syntaxhighlight>
=={{header|Icon}} and {{header|Unicon}}==
Set operations are built into Icon/Unicon.
<syntaxhighlight lang="icon">procedure main()
a := set(["John", "Serena", "Bob", "Mary", "Serena"])
b := set(["Jim", "Mary", "John", "Jim", "Bob"])
showset("a",a)
showset("b",b)
showset("(a\\b) \xef (b\\a)",(a -- b) ++ (b -- a))
showset("(a\\b)",a -- b)
showset("(b\\a)",b -- a)
end
procedure showset(n,x)
writes(n," = { ")
every writes(!x," ")
write("}")
return
end</syntaxhighlight>
Sample output:
<pre>a = { Serena Mary Bob John }
b = { Mary Bob Jim John }
(a\b) ∩ (b\a) = { Serena Jim }
(a\b) = { Serena }
(b\a) = { Jim }</pre>
=={{header|J}}==
<
B=: ~. ;:'Jim Mary John Jim Bob'
(A-.B) , (B-.A)
┌──────┬───┐
│Serena│Jim│
└──────┴───┘
A (-. , -.~) B
┌──────┬───┐
│Serena│Jim│
└──────┴───┘</syntaxhighlight>
To illustrate some of the underlying mechanics used here:
<syntaxhighlight lang="j"> A -. B NB. items in A but not in B
┌──────┐
│Serena│
└──────┘
┌───┐
│Jim│
└───┘
A NB. A is a sequence without duplicates
┌────┬──────┬───┬────┐
│John│Serena│Bob│Mary│
└────┴──────┴───┴────┘</syntaxhighlight>
Here's an alternative implementation:
<syntaxhighlight lang="j"> A (, -. [ -. -.) B
┌──────┬───┐
│Serena│Jim│
└──────┴───┘</syntaxhighlight>
Here, <code>(,)</code> contains all items from A and B and <code>([ -. -.)</code> is the idiom for set intersection, and their difference is the symmetric difference. (Note: an individual word in a J sentence may be placed inside a parenthesis with no change in evaluation, and this can also be used for emphasis when a word might get lost.)
=={{header|Java}}==
<
import java.util.HashSet;
import java.util.Set;
public class SymmetricDifference {
public static void main(String[] args) {
// Present our initial data set
System.out.println("In
System.out.println("In
// Option 1: union of differences
// Get our individual differences.
notInSetA.removeAll(setA);
Set<String> notInSetB = new HashSet<String>(setA);
notInSetB.removeAll(setB);
// The symmetric difference is the concatenation of the two individual differences
symmetricDifference.addAll(
// Option 2: union minus intersection
// Combine both sets
Set<String> union = new HashSet<String>(setA);
union.addAll(setB);
// Get the intersection
Set<String> intersection = new HashSet<String>(setA);
intersection.retainAll(setB);
// The symmetric difference is the union of the 2 sets minus the intersection
Set<String> symmetricDifference2 = new HashSet<String>(union);
symmetricDifference2.removeAll(intersection);
// Present our results
System.out.println("Not in
System.out.println("Not in
System.out.println("Symmetric Difference: " + symmetricDifference);
System.out.println("Symmetric Difference 2: " + symmetricDifference2);
}
}</
Output:
<pre>In set A: [Mary, Bob, Serena, John]
In set B: [Mary, Bob, Jim, John]
Not in set A: [Jim]
Not in set B: [Serena]
Symmetric Difference: [Jim, Serena]
Symmetric Difference 2: [Jim, Serena]</pre>
=={{header|JavaScript}}==
===ES5===
====Iterative====
{{works with|JavaScript|1.6}}
{{works with|Firefox|1.5}}
{{works with|SpiderMonkey}} for the <code>print()</code> function.
Uses the Array function <code>unique()</code> defined [[Create a Sequence of unique elements#JavaScript|here]].
<syntaxhighlight lang="javascript">// in A but not in B
function relative_complement(A, B) {
return A.filter(function(elem) {return B.indexOf(elem) == -1});
}
// in A or in B but not in both
function symmetric_difference(A,B) {
return relative_complement(A,B).concat(relative_complement(B,A));
}
var a = ["John", "Serena", "Bob", "Mary", "Serena"].unique();
var b = ["Jim", "Mary", "John", "Jim", "Bob"].unique();
print(a);
print(b);
print(symmetric_difference(a,b));</syntaxhighlight>
outputs
<pre>Bob,John,Mary,Serena
Bob,Jim,John,Mary
Serena,Jim</pre>
'''Clear JavaScript'''
<syntaxhighlight lang="javascript">function Difference(A,B)
{
var a = A.length, b = B.length, c = 0, C = [];
for (var i = 0; i < a; i++)
{ var j = 0, k = 0;
while (j < b && B[j] !== A[i]) j++;
while (k < c && C[k] !== A[i]) k++;
if (j == b && k == c) C[c++] = A[i];
}
return C;
}
function SymmetricDifference(A,B)
{
var D1 = Difference(A,B), D2 = Difference(B,A),
a = D1.length, b = D2.length;
for (var i = 0; i < b; i++) D1[a++] = D2[i];
return D1;
}
/* Example
A = ['John', 'Serena', 'Bob', 'Mary', 'Serena'];
B = ['Jim', 'Mary', 'John', 'Jim', 'Bob'];
Difference(A,B); // 'Serena'
Difference(B,A); // 'Jim'
SymmetricDifference(A,B); // 'Serena','Jim'
*/</syntaxhighlight>
===ES6===
====Functional====
By composition of generic functions;
<syntaxhighlight lang="javascript">(() => {
'use strict';
const symmetricDifference = (xs, ys) =>
union(difference(xs, ys), difference(ys, xs));
// GENERIC FUNCTIONS ------------------------------------------------------
// First instance of x (if any) removed from xs
// delete_ :: Eq a => a -> [a] -> [a]
const delete_ = (x, xs) => {
const i = xs.indexOf(x);
return i !== -1 ? (xs.slice(0, i)
.concat(xs.slice(i, -1))) : xs;
};
// (\\) :: (Eq a) => [a] -> [a] -> [a]
const difference = (xs, ys) =>
ys.reduce((a, x) => filter(z => z !== x, a), xs);
// filter :: (a -> Bool) -> [a] -> [a]
const filter = (f, xs) => xs.filter(f);
// flip :: (a -> b -> c) -> b -> a -> c
const flip = f => (a, b) => f.apply(null, [b, a]);
// foldl :: (b -> a -> b) -> b -> [a] -> b
const foldl = (f, a, xs) => xs.reduce(f, a);
// nub :: [a] -> [a]
const nub = xs => {
const mht = unconsMay(xs);
return mht.nothing ? xs : (
([h, t]) => [h].concat(nub(t.filter(s => s !== h)))
)(mht.just);
};
// show :: a -> String
const show = x => JSON.stringify(x, null, 2);
// unconsMay :: [a] -> Maybe (a, [a])
const unconsMay = xs => xs.length > 0 ? {
just: [xs[0], xs.slice(1)],
nothing: false
} : {
nothing: true
};
// union :: [a] -> [a] -> [a]
const union = (xs, ys) => {
const sx = nub(xs);
return sx.concat(foldl(flip(delete_), nub(ys), sx));
};
// TEST -------------------------------------------------------------------
const
a = ["John", "Serena", "Bob", "Mary", "Serena"],
b = ["Jim", "Mary", "John", "Jim", "Bob"];
return show(
symmetricDifference(a, b)
);
})();</syntaxhighlight>
{{Out}}
<syntaxhighlight lang="javascript">["Serena", "Jim"]</syntaxhighlight>
====Procedural ====
<syntaxhighlight lang="javascript">
const symmetricDifference = (...args) => {
let result = new Set();
for (const x of args)
for (const e of new Set(x))
if (result.has(e)) result.delete(e)
else result.add(e);
return [...result];
}
// TEST -------------------------------------------------------------------
console.log(symmetricDifference(["Jim", "Mary", "John", "Jim", "Bob"],["John", "Serena", "Bob", "Mary", "Serena"]));
console.log(symmetricDifference([1, 2, 5], [2, 3, 5], [3, 4, 5]));
</syntaxhighlight>
{{Out}}
<syntaxhighlight lang="javascript">["Jim", "Serena"]
[1, 4, 5]
</syntaxhighlight>
=={{header|jq}}==
The following implementation of symmetric_difference(a;b) makes no
assumptions about the input lists except that neither contains null;
given these assumptions, it is quite efficient. To workaround the
no-null requirement would be tedious but straightforward.
<syntaxhighlight lang="jq"># The following implementation of intersection (but not symmetric_difference) assumes that the
# elements of a (and of b) are unique and do not include null:
def intersection(a; b):
reduce ((a + b) | sort)[] as $i
([null, []]; if .[0] == $i then [null, .[1] + [$i]] else [$i, .[1]] end)
| .[1] ;
def symmetric_difference(a;b):
(a|unique) as $a | (b|unique) as $b
| (($a + $b) | unique) - (intersection($a;$b));
</syntaxhighlight>
Example:<syntaxhighlight lang="jq">symmetric_difference( [1,2,1,2]; [2,3] )
[1,3]</syntaxhighlight>
=={{header|Julia}}==
{{works with|Julia|0.6}}
Built-in function.
<syntaxhighlight lang="julia">A = ["John", "Bob", "Mary", "Serena"]
B = ["Jim", "Mary", "John", "Bob"]
@show A B symdiff(A, B)</syntaxhighlight>
{{out}}
<pre>A = String["John", "Bob", "Mary", "Serena"]
B = String["Jim", "Mary", "John", "Bob"]
symdiff(A, B) = String["Serena", "Jim"]</pre>
=={{header|K}}==
<syntaxhighlight lang="k"> A: ?("John";"Bob";"Mary";"Serena")
B: ?("Jim";"Mary";"John";"Bob")
A _dvl B / in A but not in B
"Serena"
B _dvl A / in B but not in A
"Jim"
(A _dvl B;B _dvl A) / Symmetric difference
("Serena"
"Jim")</syntaxhighlight>
=={{header|Kotlin}}==
<syntaxhighlight lang="scala">// version 1.1.2
fun main(args: Array<String>) {
val a = setOf("John", "Bob", "Mary", "Serena")
val b = setOf("Jim", "Mary", "John", "Bob")
println("A = $a")
println("B = $b")
val c = a - b
println("A \\ B = $c")
val d = b - a
println("B \\ A = $d")
val e = c.union(d)
println("A Δ B = $e")
}</syntaxhighlight>
{{out}}
<pre>
A Δ B = [Serena, Jim]
</pre>
=={{header|Ksh}}==
<syntaxhighlight lang="ksh">
#!/bin/ksh
# Symmetric difference - enumerate the items that are in A or B but not both.
# # Variables:
#
typeset -a A=( John Bob Mary Serena )
typeset -a B=( Jim Mary John Bob )
# # Functions:
#
# # Function _flattenarr(arr, sep) - flatten arr into string by separator sep
#
function _flattenarr {
typeset _arr ; nameref _arr="$1"
typeset _sep ; typeset -L1 _sep="$2"
typeset _buff
typeset _oldIFS=$IFS ; IFS="${_sep}"
_buff=${_arr[*]}
IFS="${_oldIFS}"
echo "${_buff}"
}
# # Function _notin(_arr1, _arr2) - elements in arr1 and not in arr2
#
function _notin {
typeset _ar1 ; nameref _ar1="$1"
typeset _ar2 ; nameref _ar2="$2"
typeset _i _buff _set ; integer _i
_buff=$(_flattenarr _ar2 \|)
for((_i=0; _i<${#_ar1[*]}; _i++)); do
[[ ${_ar1[_i]} != @(${_buff}) ]] && _set+="${_ar1[_i]} "
done
echo ${_set% *}
}
######
# main #
######
AnB=$(_notin A B) ; echo "A - B = ${AnB}"
BnA=$(_notin B A) ; echo "B - A = ${BnA}"
echo "A xor B = ${AnB} ${BnA}"</syntaxhighlight>
{{out}}<pre>A - B = Serena
B - A = Jim
A xor B = Serena Jim</pre>
=={{header|Lasso}}==
<syntaxhighlight lang="lasso">
[
var(
'a' = array(
'John'
,'Bob'
,'Mary'
,'Serena'
)
,'b' = array
);
$b->insert( 'Jim' ); // Alternate method of populating array
$b->insert( 'Mary' );
$b->insert( 'John' );
$b->insert( 'Bob' );
$a->sort( true ); // arrays must be sorted (true = ascending) for difference to work
$b->sort( true );
$a->difference( $b )->union( $b->difference( $a ) );
]
</syntaxhighlight>
=={{header|Logo}}==
{{works with|UCB Logo}}
<syntaxhighlight lang="logo">to diff :a :b [:acc []]
if empty? :a [output sentence :acc :b]
ifelse member? first :a :b ~
Line 273 ⟶ 2,161:
make "b [Jim Mary John Bob]
show diff :a :b ; [Serena Jim]</syntaxhighlight>
=={{header|Lua}}==
<syntaxhighlight lang="lua">A = { ["John"] = true, ["Bob"] = true, ["Mary"] = true, ["Serena"] = true }
B = { ["Jim"] = true, ["Mary"] = true, ["John"] = true, ["Bob"] = true }
A_B = {}
for a in pairs(A) do
if not B[a] then A_B[a] = true end
end
B_A = {}
for b in pairs(B) do
if not A[b] then B_A[b] = true end
end
for a_b in pairs(A_B) do
print( a_b )
end
for b_a in pairs(B_A) do
print( b_a )
end</syntaxhighlight>
Object-oriented approach:
<syntaxhighlight lang="lua">SetPrototype = {
__index = {
union = function(self, other)
local res = Set{}
for k in pairs(self) do res[k] = true end
for k in pairs(other) do res[k] = true end
return res
end,
intersection = function(self, other)
local res = Set{}
for k in pairs(self) do res[k] = other[k] end
return res
end,
difference = function(self, other)
local res = Set{}
for k in pairs(self) do
if not other[k] then res[k] = true end
end
return res
end,
symmetric_difference = function(self, other)
return self:difference(other):union(other:difference(self))
end
},
-- return string representation of set
__tostring = function(self)
-- list to collect all elements from the set
local l = {}
for k in pairs(self) do l[#l+1] = k end
return "{" .. table.concat(l, ", ") .. "}"
end,
-- allow concatenation with other types to yield string
__concat = function(a, b)
return (type(a) == 'string' and a or tostring(a)) ..
(type(b) == 'string' and b or tostring(b))
end
}
function Set(items)
local _set = {}
setmetatable(_set, SetPrototype)
for _, item in ipairs(items) do _set[item] = true end
return _set
end
A = Set{"John", "Serena", "Bob", "Mary", "Serena"}
B = Set{"Jim", "Mary", "John", "Jim", "Bob"}
print("Set A: " .. A)
print("Set B: " .. B)
print("\nSymm. difference (A\\B)∪(B\\A): " .. A:symmetric_difference(B))
print("Union A∪B : " .. A:union(B))
print("Intersection A∩B : " .. A:intersection(B))
print("Difference A\\B : " .. A:difference(B))
print("Difference B\\A : " .. B:difference(A))</syntaxhighlight>
'''Output:'''
Set A: {Serena, Mary, John, Bob}
Set B: {Mary, Jim, John, Bob}
Symm. difference (A\B)∪(B\A): {Serena, Jim}
Union A∪B : {John, Serena, Jim, Mary, Bob}
Intersection A∩B : {Mary, John, Bob}
Difference A\B : {Serena}
Difference B\A : {Jim}
=={{header|Maple}}==
Maple has built-in support for set operations. Assign the sets A and B:
<syntaxhighlight lang="maple">A := {John, Bob, Mary, Serena};
B := {Jim, Mary, John, Bob};</syntaxhighlight>
Now compute the symmetric difference with the '''symmdiff''' command:
<syntaxhighlight lang="maple">symmdiff(A, B);</syntaxhighlight>
{{out}}
{Jim, Serena}
=={{header|Mathematica}}/{{header|Wolfram Language}}==
Mathematica has built-in support for operations on sets, using its generic symbolic lists. This function finds the entries in each list that are not present in the intersection of the two lists.
<syntaxhighlight lang="mathematica">SymmetricDifference[x_List,y_List] := Join[Complement[x,Intersection[x,y]],Complement[y,Intersection[x,y]]]</syntaxhighlight>
For large lists, some performance improvement could be made by caching the intersection of the two lists to avoid computing it twice:
<syntaxhighlight lang="mathematica">CachedSymmetricDifference[x_List,y_List] := Module[{intersect=Intersection[x,y]},Join[Complement[x,intersect],Complement[y,intersect]]]</syntaxhighlight>
Also, due to Mathematica's symbolic nature, these functions are automatically applicable to lists of any content, such as strings, integers, reals, graphics, or undefined generic symbols (e.g. unassigned variables).
=={{header|MATLAB}}==
If you are using a vector of numbers as the sets of which you like to find the symmetric difference, then there are already utilities that operate on these types of sets built into MATLAB. This code will take the symmetric difference of two vectors:
<syntaxhighlight lang="matlab">>> [setdiff([1 2 3],[2 3 4]) setdiff([2 3 4],[1 2 3])]
ans =
1 4</syntaxhighlight>
On the other hand, if you are using cell-arrays as sets, there are no built-in set utilities to operate on those data structures, so you will have to program them yourself. Also, the only way to have a set of strings is to put each string in a cell of a cell array, trying to put them into a vector will cause all of the strings to concatenate.
This code will return the symmetric difference of two sets and will take both cell arrays and vectors (as in the above example) as inputs.
<syntaxhighlight lang="matlab">function resultantSet = symmetricDifference(set1,set2)
assert( ~xor(iscell(set1),iscell(set2)), 'Both sets must be of the same type, either cells or matricies, but not a combination of the two' );
%% Helper function definitions
%Define what set equality means for cell arrays
function trueFalse = equality(set1,set2)
if xor(iscell(set1),iscell(set2)) %set1 or set2 is a set and the other isn't
trueFalse = false;
return
elseif ~(iscell(set1) || iscell(set2)) %set1 and set2 are not sets
if ischar(set1) && ischar(set2) %set1 and set2 are chars or strings
trueFalse = strcmp(set1,set2);
elseif xor(ischar(set1),ischar(set2)) %set1 or set2 is a string but the other isn't
trueFalse = false;
else %set1 and set2 are not strings
if numel(set1) == numel(set2) %Since they must be matricies if the are of equal cardinality then they can be compaired
trueFalse = all((set1 == set2));
else %If they aren't of equal cardinality then they can't be equal
trueFalse = false;
end
end
return
else %set1 and set2 are both sets
for x = (1:numel(set1))
trueFalse = false;
for y = (1:numel(set2))
%Compair the current element of set1 with every element
%in set2
trueFalse = equality(set1{x},set2{y});
%If the element of set1 is equal to the current element
%of set2 remove that element from set2 and break out of
%this inner loop
if trueFalse
set2(y) = [];
break
end
end
%If the loop completes without breaking then the current
%element of set1 is not contained in set2 therefore the two
%sets are not equal and we can return an equality of false
if (~trueFalse)
return
end
end
%If, after checking every element in both sets, there are still
%elements in set2 then the two sets are not equivalent
if ~isempty(set2)
trueFalse = false;
end
%If the executation makes it here without the previous if
%statement evaluating to true, then this function will return
%true.
end
end %equality
%Define the relative complement for cell arrays
function set1 = relativeComplement(set1,set2)
for k = (1:numel(set2))
if numel(set1) == 0
return
end
j = 1;
while j <= numel(set1)
if equality(set1{j},set2{k})
set1(j) = [];
j = j-1;
end
j = j+1;
end
end
end %relativeComplement
%% The Symmetric Difference Algorithm
if iscell(set1) && iscell(set2)
resultantSet = [relativeComplement(set1,set2) relativeComplement(set2,set1)];
else
resultantSet = [setdiff(set1,set2) setdiff(set2,set1)];
end
resultantSet = unique(resultantSet); %Make sure there are not duplicates
end %symmetricDifference</syntaxhighlight>
Solution Test:
<syntaxhighlight lang="matlab">>> A = {'John','Bob','Mary','Serena'}
A =
'John' 'Bob' 'Mary' 'Serena'
>> B = {'Jim','Mary','John','Bob'}
B =
'Jim' 'Mary' 'John' 'Bob'
>> symmetricDifference(A,B)
ans =
'Serena' 'Jim' %Correct
>> symmetricDifference([1 2 3],[2 3 4])
ans =
1 4 %Correct</syntaxhighlight>
=={{header|Maxima}}==
<syntaxhighlight lang="maxima">/* builtin */
symmdifference({"John", "Bob", "Mary", "Serena"},
{"Jim", "Mary", "John", "Bob"});
{"Jim", "Serena"}</syntaxhighlight>
=={{header|Mercury}}==
<syntaxhighlight lang="mercury">:- module symdiff.
:- interface.
:- import_module io.
:- pred main(io::di, io::uo) is det.
:- implementation.
:- import_module list, set, string.
main(!IO) :-
A = set(["John", "Bob", "Mary", "Serena"]),
B = set(["Jim", "Mary", "John", "Bob"]),
print_set("A\\B", DiffAB @ (A `difference` B), !IO),
print_set("B\\A", DiffBA @ (B `difference` A), !IO),
print_set("A symdiff B", DiffAB `union` DiffBA, !IO).
:- pred print_set(string::in, set(T)::in, io::di, io::uo) is det.
print_set(Desc, Set, !IO) :-
to_sorted_list(Set, Elems),
io.format("%11s: %s\n", [s(Desc), s(string(Elems))], !IO).</syntaxhighlight>
=={{header|MiniScript}}==
<syntaxhighlight lang="miniscript">
Set = new map
Set["set"] = {}
Set.init = function(items)
set = new Set
set.set = {}
for item in items
set.add(item)
end for
return set
end function
Set.contains = function(item)
return self.set.hasIndex(item)
end function
Set.items = function
return self.set.indexes
end function
Set.add = function(item)
self.set[item] = true
end function
Set.union = function(other)
result = Set.init
result.set = self.set + other.set
return result
end function
Set.difference = function(other)
result = Set.init
for item in self.items
if not other.contains(item) then result.add(item)
end for
return result
end function
Set.symmetricDifference = function(other)
diff1 = self.difference(other)
diff2 = other.difference(self)
return diff1.union(diff2)
end function
a = ["John", "Serena", "Bob", "Mary", "Serena"]
b = ["Jim", "Mary", "John", "Jim", "Bob"]
A1 = Set.init(a)
B1 = Set.init(b)
print "A XOR B " + A1.symmetricDifference(B1).items
print "A - B " + A1.difference(B1).items
print "B - A " + B1.difference(A1).items
</syntaxhighlight>
{{out}}
<pre>A XOR B ["Serena", "Jim"]
A - B ["Serena"]
B - A ["Jim"]
</pre>
=={{header|Miranda}}==
<syntaxhighlight lang="miranda>main :: [sys_message]
main = [Stdout (show (symdiff a b) ++ "\n")]
where a = ["John", "Serena", "Bob", "Mary", "Serena"]
b = ["Jim", "Mary", "John", "Jim", "Bob"]
symdiff :: [*]->[*]->[*]
symdiff a b = (a' -- b') ++ (b' -- a')
where a' = nub a
b' = nub b
nub :: [*]->[*]
nub = f []
where f acc [] = acc
f acc (a:as) = f acc as, if a $in acc
= f (a:acc) as, otherwise
in :: *->[*]->bool
in i [] = False
in i (a:as) = a == i \/ i $in as</syntaxhighlight>
{{out}}
<pre>["Serena","Jim"]</pre>
=={{header|Nim}}==
<syntaxhighlight lang="nim">import sets
var setA = ["John", "Bob", "Mary", "Serena"].toHashSet
var setB = ["Jim", "Mary", "John", "Bob"].toHashSet
echo setA -+- setB # Symmetric difference
echo setA - setB # Difference
echo setB - setA # Difference</syntaxhighlight>
Output:
<pre>{Serena, Jim}
{Serena}
{Jim}</pre>
=={{header|Objective-C}}==
<syntaxhighlight lang="objc">#import <Foundation/Foundation.h>
int main(int argc, const char *argv[]) {
@autoreleasepool {
NSSet* setA = [NSSet setWithObjects:@"John", @"Serena", @"Bob", @"Mary", @"Serena", nil];
NSSet* setB = [NSSet setWithObjects:@"Jim", @"Mary", @"John", @"Jim", @"Bob", nil];
// Present our initial data set
NSLog(@"In set A: %@", setA);
NSLog(@"In set B: %@", setB);
// Get our individual differences.
NSMutableSet* notInSetA = [NSMutableSet setWithSet:setB];
[notInSetA minusSet:setA];
NSMutableSet* notInSetB = [NSMutableSet setWithSet:setA];
[notInSetB minusSet:setB];
// The symmetric difference is the concatenation of the two individual differences
NSMutableSet* symmetricDifference = [NSMutableSet setWithSet:notInSetA];
[symmetricDifference unionSet:notInSetB];
// Present our results
NSLog(@"Not in set A: %@", notInSetA);
NSLog(@"Not in set B: %@", notInSetB);
NSLog(@"Symmetric Difference: %@", symmetricDifference);
}
return 0;
}</syntaxhighlight>
=={{header|OCaml}}==
<syntaxhighlight lang
List.rev (List.fold_left f [] lst)
let ( -|
unique (List.filter (fun v -> not (List.mem v b)) a)
let ( -|- ) a b = (b -| a) @ (a -| b)</syntaxhighlight>
in the toplevel:
<syntaxhighlight lang="ocaml"># let a = [ "John"; "Bob"; "Mary"; "Serena" ]
and b = [ "Jim"; "Mary"; "John"; "Bob" ]
;;
Line 297 ⟶ 2,579:
# b -| a ;;
- : string list = ["Jim"]</
=={{header|
<syntaxhighlight lang="oorexx">a = .set~of("John", "Bob", "Mary", "Serena")
b = .set~of("Jim", "Mary", "John", "Bob")
-- the xor operation is a symmetric difference
do item over a~xor(b)
say item
end</syntaxhighlight>
Output:
<pre>
Serena
Jim
</pre>
=={{header|Oz}}==
Oz does not have a general set data type. We can implement some basic set operations in terms of list functions and use them to define the symmetric difference:
<syntaxhighlight lang="oz">declare
fun {SymDiff A B}
{Union {Diff A B} {Diff B A}}
end
%% implement sets in terms of lists
fun {MakeSet Xs}
set({Nub2 Xs nil})
end
fun {Diff set(A) set(B)}
set({FoldL B List.subtract A})
end
fun {Union set(A) set(B)}
set({Append A B})
end
%% --
fun {Nub2 Xs Ls}
case Xs of nil then nil
[] X|Xr andthen {Member X Ls} then {Nub2 Xr Ls}
[] X|Xr then X|{Nub2 Xr X|Ls}
end
end
in
{Show {SymDiff
{MakeSet [john bob mary serena]}
{MakeSet [jim mary john bob]}}}
{Show {SymDiff
{MakeSet [john serena bob mary serena]}
{MakeSet [jim mary john jim bob]}}}</syntaxhighlight>
Oz <em>does</em> have a type for finite sets of non-negative integers. This is part of the constraint programming support. For the given task, we could use it like this if we assume numbers instead of names:
<syntaxhighlight lang="oz">declare
fun {SymDiff A B}
{FS.union {FS.diff A B} {FS.diff B A}}
end
A = {FS.value.make [1 2 3 4]}
B = {FS.value.make [5 3 1 2]}
in
{Show {SymDiff A B}}</syntaxhighlight>
=={{header|PARI/GP}}==
<syntaxhighlight lang="parigp">sd(u,v)={
my(r=List());
u=vecsort(u,,8);
v=vecsort(v,,8);
for(i=1,#u,if(!setsearch(v,u[i]),listput(r,u[i])));
for(i=1,#v,if(!setsearch(u,v[i]),listput(r,v[i])));
Vec(r)
};
sd(["John", "Serena", "Bob", "Mary", "Serena"],["Jim", "Mary", "John", "Jim", "Bob"])</syntaxhighlight>
=={{header|Pascal}}==
{{works with|FPC 3.0.2}}
<syntaxhighlight lang="pascal">PROGRAM Symmetric_difference;
TYPE
TName = (Bob, Jim, John, Mary, Serena);
TList = SET OF TName;
PROCEDURE Put(txt : String; ResSet : TList);
VAR
I : TName;
BEGIN
Write(txt);
FOR I IN ResSet DO Write(I,' ');
WriteLn
END;
VAR
ListA : TList = [John, Bob, Mary, Serena];
ListB : TList = [Jim, Mary, John, Bob];
BEGIN
Put('ListA -> ', ListA);
Put('ListB -> ', ListB);
Put('ListA >< ListB -> ', (ListA - ListB) + (ListB - ListA));
Put('ListA - ListB -> ', ListA - ListB);
Put('ListB - ListA -> ', ListB - ListA);
ReadLn;
END.</syntaxhighlight>
{{out}}
<pre>ListA -> Bob John Mary Serena
ListB -> Bob Jim John Mary
ListA >< ListB -> Jim Serena
ListA - ListB -> Serena
ListB - ListA -> Jim</pre>
'''Object Pascal actually has a 'Symmetric Difference' operator `> <`: '''
<syntaxhighlight lang="pascal">
program SymmetricDifference;
type
charSet = set of Char;
var
s1, s2, s3: charSet;
ch: char;
begin
s1 := ['a', 'b', 'c', 'd'];
s2 := ['c', 'd', 'e', 'f'];
s3 := s1 >< s2;
for ch in s3 do
write(ch, ' ');
writeLn;
end.
</syntaxhighlight>
Output:
<pre>
a b e f
</pre>
=={{header|PascalABC.NET}}==
<syntaxhighlight lang="delphi">
begin
var s1: HashSet<string> := HSet('John', 'Serena', 'Bob', 'Mary', 'Serena');
var s2 := HSet('Jim', 'Mary', 'John', 'Jim', 'Bob');
Println((s1 - s2) + (s2 - s1));
Println(s1 - s2);
Println(s2 - s1);
end.
</syntaxhighlight>
{{out}}
<pre>
{Serena,Jim}
{Serena}
{Jim}
</pre>
=={{header|Perl}}==
<syntaxhighlight lang="perl">sub symm_diff {
# two lists passed in as references
my %in_a = map(($_=>1), @{+shift});
my %in_b = map(($_=>1), @{+shift});
my @b = grep { !$in_a{$_} } keys %in_b;
# return
return \@a, \@b, [ @a, @b ]
}
my @a = qw(John Serena Bob Mary Serena);
my @b = qw(Jim Mary John Jim Bob );
my ($a, $b, $s) = symm_diff(\@a, \@b);
print "A\\B: @$a\nB\\A: @$b\nSymm: @$s\n";</syntaxhighlight>
{{out}}
<pre>A\B: Serena
B\A: Jim
Symm: Serena Jim</pre>
=={{header|Phix}}==
<!--<syntaxhighlight lang="phix">(phixonline)-->
<span style="color: #008080;">function</span> <span style="color: #000000;">Union</span><span style="color: #0000FF;">(</span><span style="color: #004080;">sequence</span> <span style="color: #000000;">a</span><span style="color: #0000FF;">,</span> <span style="color: #004080;">sequence</span> <span style="color: #000000;">b</span><span style="color: #0000FF;">)</span>
<span style="color: #008080;">for</span> <span style="color: #000000;">i</span><span style="color: #0000FF;">=</span><span style="color: #000000;">1</span> <span style="color: #008080;">to</span> <span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">a</span><span style="color: #0000FF;">)</span> <span style="color: #008080;">do</span>
<span style="color: #008080;">if</span> <span style="color: #008080;">not</span> <span style="color: #7060A8;">find</span><span style="color: #0000FF;">(</span><span style="color: #000000;">a</span><span style="color: #0000FF;">[</span><span style="color: #000000;">i</span><span style="color: #0000FF;">],</span><span style="color: #000000;">b</span><span style="color: #0000FF;">)</span> <span style="color: #008080;">then</span>
<span style="color: #000000;">b</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">append</span><span style="color: #0000FF;">(</span><span style="color: #000000;">b</span><span style="color: #0000FF;">,</span><span style="color: #000000;">a</span><span style="color: #0000FF;">[</span><span style="color: #000000;">i</span><span style="color: #0000FF;">])</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">for</span>
<span style="color: #008080;">return</span> <span style="color: #000000;">b</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">function</span>
<span style="color: #008080;">function</span> <span style="color: #000000;">Difference</span><span style="color: #0000FF;">(</span><span style="color: #004080;">sequence</span> <span style="color: #000000;">a</span><span style="color: #0000FF;">,</span> <span style="color: #004080;">sequence</span> <span style="color: #000000;">b</span><span style="color: #0000FF;">)</span>
<span style="color: #004080;">sequence</span> <span style="color: #000000;">res</span> <span style="color: #0000FF;">=</span> <span style="color: #0000FF;">{}</span>
<span style="color: #008080;">for</span> <span style="color: #000000;">i</span><span style="color: #0000FF;">=</span><span style="color: #000000;">1</span> <span style="color: #008080;">to</span> <span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">a</span><span style="color: #0000FF;">)</span> <span style="color: #008080;">do</span>
<span style="color: #008080;">if</span> <span style="color: #008080;">not</span> <span style="color: #7060A8;">find</span><span style="color: #0000FF;">(</span><span style="color: #000000;">a</span><span style="color: #0000FF;">[</span><span style="color: #000000;">i</span><span style="color: #0000FF;">],</span><span style="color: #000000;">b</span><span style="color: #0000FF;">)</span>
<span style="color: #008080;">and</span> <span style="color: #008080;">not</span> <span style="color: #7060A8;">find</span><span style="color: #0000FF;">(</span><span style="color: #000000;">a</span><span style="color: #0000FF;">[</span><span style="color: #000000;">i</span><span style="color: #0000FF;">],</span><span style="color: #000000;">res</span><span style="color: #0000FF;">)</span> <span style="color: #008080;">then</span>
<span style="color: #000000;">res</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">append</span><span style="color: #0000FF;">(</span><span style="color: #000000;">res</span><span style="color: #0000FF;">,</span><span style="color: #000000;">a</span><span style="color: #0000FF;">[</span><span style="color: #000000;">i</span><span style="color: #0000FF;">])</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">for</span>
<span style="color: #008080;">return</span> <span style="color: #000000;">res</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">function</span>
<span style="color: #008080;">function</span> <span style="color: #000000;">Symmetric_Difference</span><span style="color: #0000FF;">(</span><span style="color: #004080;">sequence</span> <span style="color: #000000;">a</span><span style="color: #0000FF;">,</span> <span style="color: #004080;">sequence</span> <span style="color: #000000;">b</span><span style="color: #0000FF;">)</span>
<span style="color: #008080;">return</span> <span style="color: #000000;">Union</span><span style="color: #0000FF;">(</span><span style="color: #000000;">Difference</span><span style="color: #0000FF;">(</span><span style="color: #000000;">a</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">b</span><span style="color: #0000FF;">),</span> <span style="color: #000000;">Difference</span><span style="color: #0000FF;">(</span><span style="color: #000000;">b</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">a</span><span style="color: #0000FF;">))</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">function</span>
<span style="color: #004080;">sequence</span> <span style="color: #000000;">a</span> <span style="color: #0000FF;">=</span> <span style="color: #0000FF;">{</span><span style="color: #008000;">"John"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Serena"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Bob"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Mary"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Serena"</span><span style="color: #0000FF;">},</span>
<span style="color: #000000;">b</span> <span style="color: #0000FF;">=</span> <span style="color: #0000FF;">{</span><span style="color: #008000;">"Jim"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Mary"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"John"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Jim"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Bob"</span><span style="color: #0000FF;">}</span>
<span style="color: #0000FF;">?</span><span style="color: #000000;">Symmetric_Difference</span><span style="color: #0000FF;">(</span><span style="color: #000000;">a</span><span style="color: #0000FF;">,</span><span style="color: #000000;">a</span><span style="color: #0000FF;">)</span>
<span style="color: #0000FF;">?</span><span style="color: #000000;">Symmetric_Difference</span><span style="color: #0000FF;">(</span><span style="color: #000000;">a</span><span style="color: #0000FF;">,</span><span style="color: #000000;">b</span><span style="color: #0000FF;">)</span>
<span style="color: #0000FF;">?</span><span style="color: #000000;">Symmetric_Difference</span><span style="color: #0000FF;">(</span><span style="color: #000000;">b</span><span style="color: #0000FF;">,</span><span style="color: #000000;">a</span><span style="color: #0000FF;">)</span>
<span style="color: #0000FF;">?</span><span style="color: #000000;">Symmetric_Difference</span><span style="color: #0000FF;">(</span><span style="color: #000000;">b</span><span style="color: #0000FF;">,</span><span style="color: #000000;">b</span><span style="color: #0000FF;">)</span>
<!--</syntaxhighlight>-->
{{Out}}
<pre>
{}
{"Jim","Serena"}
{"Serena","Jim"}
{}
</pre>
You can also use the builtin (which defaults to symmetic differences), though it will crash if you pass it "sets" with duplicate elements.
<!--<syntaxhighlight lang="phix">(phixonline)-->
<span style="color: #008080;">include</span> <span style="color: #000000;">sets</span><span style="color: #0000FF;">.</span><span style="color: #000000;">e</span>
<span style="color: #004080;">sequence</span> <span style="color: #000000;">a</span> <span style="color: #0000FF;">=</span> <span style="color: #0000FF;">{</span><span style="color: #008000;">"John"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Serena"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Bob"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Mary"</span><span style="color: #0000FF;">},</span>
<span style="color: #000000;">b</span> <span style="color: #0000FF;">=</span> <span style="color: #0000FF;">{</span><span style="color: #008000;">"Jim"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Mary"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"John"</span><span style="color: #0000FF;">,</span> <span style="color: #008000;">"Bob"</span><span style="color: #0000FF;">}</span>
<span style="color: #0000FF;">?</span><span style="color: #000000;">difference</span><span style="color: #0000FF;">(</span><span style="color: #000000;">a</span><span style="color: #0000FF;">,</span><span style="color: #000000;">a</span><span style="color: #0000FF;">)</span>
<span style="color: #0000FF;">?</span><span style="color: #000000;">difference</span><span style="color: #0000FF;">(</span><span style="color: #000000;">a</span><span style="color: #0000FF;">,</span><span style="color: #000000;">b</span><span style="color: #0000FF;">)</span>
<span style="color: #0000FF;">?</span><span style="color: #000000;">difference</span><span style="color: #0000FF;">(</span><span style="color: #000000;">b</span><span style="color: #0000FF;">,</span><span style="color: #000000;">a</span><span style="color: #0000FF;">)</span>
<span style="color: #0000FF;">?</span><span style="color: #000000;">difference</span><span style="color: #0000FF;">(</span><span style="color: #000000;">b</span><span style="color: #0000FF;">,</span><span style="color: #000000;">b</span><span style="color: #0000FF;">)</span>
<!--</syntaxhighlight>-->
Same output as above
=={{header|PHP}}==
<syntaxhighlight lang="php"><?php
$a = array('John', 'Bob', 'Mary', 'Serena');
$b = array('Jim', 'Mary', 'John', 'Bob');
// Remove any duplicates
$a = array_unique($a);
$b = array_unique($b);
// Get the individual differences, using array_diff()
$a_minus_b = array_diff($a, $b);
$b_minus_a = array_diff($b, $a);
// Simply merge them together to get the symmetric difference
$symmetric_difference = array_merge($a_minus_b, $b_minus_a);
// Present our results.
echo 'List A: ', implode(', ', $a),
"\nList B: ", implode(', ', $b),
"\nA \\ B: ", implode(', ', $a_minus_b),
"\nB \\ A: ", implode(', ', $b_minus_a),
"\nSymmetric difference: ", implode(', ', $symmetric_difference), "\n";
?></syntaxhighlight>
This outputs:
<pre>List A: John, Bob, Mary, Serena
List B: Jim, Mary, John, Bob
A \ B: Serena
B \ A: Jim
Symmetric difference: Serena, Jim</pre>
=={{header|Picat}}==
Using the <code>ordset</code> module.
<syntaxhighlight lang="picat">import ordset.
go =>
A = ["John", "Serena", "Bob", "Mary", "Serena"].new_ordset(),
B = ["Jim", "Mary", "John", "Jim", "Bob"].new_ordset(),
println(symmetric_difference=symmetric_difference(A,B)),
println(symmetric_difference2=symmetric_difference2(A,B)),
println(subtractAB=subtract(A,B)),
println(subtractBA=subtract(B,A)),
println(union=union(A,B)),
println(intersection=intersection(A,B)),
nl.
symmetric_difference(A,B) = union(subtract(A,B), subtract(B,A)).
% variant
symmetric_difference2(A,B) = subtract(union(A,B), intersection(B,A)).</syntaxhighlight>
{{out}}
<pre>symmetric_difference = [Jim,Serena]
symmetric_difference2 = [Jim,Serena]
subtractAB = [Serena]
subtractBA = [Jim]
union = [Bob,Jim,John,Mary,Serena]
intersection = [Bob,John,Mary]</pre>
=={{header|PicoLisp}}==
<syntaxhighlight lang="picolisp">(de symdiff (A B)
(uniq (conc (diff A B) (diff B A))) )</syntaxhighlight>
Output:
<pre>(symdiff '(John Serena Bob Mary Serena) '(Jim Mary John Jim Bob))
-> (Serena Jim)</pre>
=={{header|Pike}}==
The set type in Pike is 'multiset', that is, a value may appear multiple times and the difference operator only removes equal amounts of duplicates.
<syntaxhighlight lang="pike">> multiset(string) A = (< "John", "Serena", "Bob", "Mary", "Bob", "Serena" >);
> multiset(string) B = (< "Jim", "Mary", "Mary", "John", "Bob", "Jim" >);
> A^B;
Result: (< "Bob", "Serena", "Serena", "Mary", "Jim", "Jim" >)</syntaxhighlight>
The <code>^</code> operator treats arrays like multisets.
<syntaxhighlight lang="pike">> array(string) A = ({ "John", "Serena", "Bob", "Mary", "Serena", "Bob" });
> array(string) B = ({ "Jim", "Mary", "John", "Jim", "Bob", "Mary" });
> A^B;
Result: ({ "Serena", "Serena", "Bob", "Jim", "Jim", "Mary"})
> Array.uniq((A-B)+(B-A));
Result: ({ "Serena", "Jim" })</syntaxhighlight>
Set operations are also possible with mappings. Here the difference operator works as expected:
<syntaxhighlight lang="pike">> mapping(string:int) A = ([ "John":1, "Serena":1, "Bob":1, "Mary":1 ]);
> mapping(string:int) B = ([ "Jim":1, "Mary":1, "John":1, "Bob":1 ]);
> A^B;
Result: ([ "Jim": 1, "Serena": 1 ])</syntaxhighlight>
Lastly, there is a Set class.
<syntaxhighlight lang="pike">> ADT.Set A = ADT.Set((< "John", "Serena", "Bob", "Mary", "Serena", "Bob" >));
> ADT.Set B = ADT.Set((< "Jim", "Mary", "John", "Jim", "Bob", "Mary" >));
> (A-B)+(B-A);
Result: ADT.Set({ "Serena", "Jim" })</syntaxhighlight>
=={{header|PL/I}}==
<syntaxhighlight lang="pli">/* PL/I ***************************************************************
* 17.08.2013 Walter Pachl
**********************************************************************/
*process source attributes xref;
sd: Proc Options(main);
Dcl a(4) Char(20) Var Init('John','Bob','Mary','Serena');
Dcl b(4) Char(20) Var Init('Jim','Mary','John','Bob');
Call match(a,b);
Call match(b,a);
match: Proc(x,y);
Dcl (x(*),y(*)) Char(*) Var;
Dcl (i,j) Bin Fixed(31);
Do i=1 To hbound(x);
Do j=1 To hbound(y);
If x(i)=y(j) Then Leave;
End;
If j>hbound(y) Then
Put Edit(x(i))(Skip,a);
End;
End;
End;</syntaxhighlight>
Output:
<pre>
Serena
Jim
</pre>
=={{header|PowerShell}}==
<syntaxhighlight lang="powershell">$A = @( "John"
"Bob"
"Mary"
"Serena" )
$B = @( "Jim"
"Mary"
"John"
"Bob" )
# Full commandlet name and full parameter names
Compare-Object -ReferenceObject $A -DifferenceObject $B
# Same commandlet using an alias and positional parameters
Compare $A $B
# A - B
Compare $A $B | Where SideIndicator -eq "<=" | Select -ExpandProperty InputObject
# B - A
Compare $A $B | Where SideIndicator -eq "=>" | Select -ExpandProperty InputObject</syntaxhighlight>
{{out}}
<pre>InputObject SideIndicator
----------- -------------
Jim =>
Serena <=
InputObject SideIndicator
----------- -------------
Jim =>
Serena <=
Serena
Jim</pre>
=={{header|Prolog}}==
{{Works with|SWI-Prolog}}
<syntaxhighlight lang="prolog">sym_diff :-
A = ['John', 'Serena', 'Bob', 'Mary', 'Serena'],
B = ['Jim', 'Mary', 'John', 'Jim', 'Bob'],
format('A : ~w~n', [A]),
format('B : ~w~n', [B]),
list_to_set(A, SA),
list_to_set(B, SB),
format('set from A : ~w~n', [SA]),
format('set from B : ~w~n', [SB]),
subtract(SA, SB, DAB),
format('difference A\\B : ~w~n', [DAB]),
subtract(SB, SA, DBA),
format('difference B\\A : ~w~n', [DBA]),
union(DAB, DBA, Diff),
format('symetric difference : ~w~n', [Diff]).</syntaxhighlight>
output :
<pre>A : [John,Serena,Bob,Mary,Serena]
B : [Jim,Mary,John,Jim,Bob]
set from A : [John,Serena,Bob,Mary]
set from B : [Jim,Mary,John,Bob]
difference A\B : [Serena]
difference B\A : [Jim]
symetric difference : [Serena,Jim]
true.</pre>
=={{header|PureBasic}}==
===Simple approach===
<syntaxhighlight lang="purebasic">Dim A.s(3)
Dim B.s(3)
A(0)="John": A(1)="Bob": A(2)="Mary": A(3)="Serena"
B(0)="Jim": B(1)="Mary":B(2)="John": B(3)="Bob"
For a=0 To ArraySize(A()) ; A-B
For b=0 To ArraySize(B())
If A(a)=B(b)
Break
ElseIf b=ArraySize(B())
Debug A(a)
EndIf
Next b
Next a
For b=0 To ArraySize(B()) ; B-A
For a=0 To ArraySize(A())
If A(a)=B(b)
Break
ElseIf a=ArraySize(A())
Debug B(b)
EndIf
Next a
Next b</syntaxhighlight>
===Solution using lists===
<syntaxhighlight lang="purebasic">DataSection
SetA:
Data.i 4
Data.s "John", "Bob", "Mary", "Serena"
; Data.i 5
; Data.s "John", "Serena", "Bob", "Mary", "Serena"
SetB:
Data.i 4
Data.s "Jim", "Mary", "John", "Bob"
; Data.i 5
; Data.s "Jim", "Mary", "John", "Jim", "Bob"
EndDataSection
Procedure addElementsToSet(List x.s())
;requires the read pointer to be set prior to calling by using 'Restore'
Protected i, count
Read.i count
For i = 1 To count
AddElement(x())
Read.s x()
Next
EndProcedure
Procedure displaySet(List x.s())
Protected i, count = ListSize(x())
FirstElement(x())
For i = 1 To count
Print(x())
NextElement(x())
If i <> count: Print(", "): EndIf
Next
PrintN("")
EndProcedure
Procedure symmetricDifference(List a.s(), List b.s(), List result.s())
Protected ACount = ListSize(a()), BCount = ListSize(b()), prev.s
;this may leave set a and b in a different order
SortList(a(),#PB_Sort_Ascending)
SortList(b(),#PB_Sort_Ascending)
FirstElement(a())
FirstElement(b())
LastElement(result()) ;add to end of result()
While ACount > 0 Or BCount > 0
If ACount <> 0 And BCount <> 0 And a() = b()
ACount - 1: NextElement(a())
BCount - 1: NextElement(b())
ElseIf BCount = 0 Or (ACount <> 0 And a() < b())
AddElement(result()): result() = a()
prev = a(): Repeat: ACount - 1: NextElement(a()): Until ACount = 0 Or (a() <> prev)
ElseIf ACount = 0 Or (BCount <> 0 And a() > b())
AddElement(result()): result() = b()
prev = b(): Repeat: BCount - 1: NextElement(b()): Until BCount = 0 Or (b() <> prev)
EndIf
Wend
EndProcedure
If OpenConsole()
NewList a.s(): Restore SetA: addElementsToSet(a())
NewList b.s(): Restore SetB: addElementsToSet(b())
Print("Set A: "): displaySet(a())
Print("Set B: "): displaySet(b())
NewList sd.s()
symmetricDifference(a(), b(), sd())
Print("Symmetric Difference: "): displaySet(sd())
Print(#CRLF$ + #CRLF$ + "Press ENTER to exit")
Input()
CloseConsole()
EndIf</syntaxhighlight>
Sample output:
<pre>Set A: John, Bob, Mary, Serena
Set B: Jim, Mary, John, Bob
Symmetric Difference: Jim, Serena</pre>
=={{header|Python}}==
Python's <
'''Python 3.x''' and '''Python 2.7''' have syntax for set literals:
<syntaxhighlight lang="python">>>> setA = {"John", "Bob", "Mary", "Serena"}
>>> setB = {"Jim", "Mary", "John", "Bob"}
>>> setA ^ setB # symmetric difference of A and B
{'Jim', 'Serena'}
>>> setA - setB # elements in A that are not in B
{'Serena'}
>>> setB - setA # elements in B that are not in A
{'Jim'}
>>> setA | setB # elements in A or B (union)
{'John', 'Bob', 'Jim', 'Serena', 'Mary'}
>>> setA & setB # elements in both A and B (intersection)
{'Bob', 'John', 'Mary'}</syntaxhighlight>
Note that the order of set elements is undefined.
Earlier versions of Python:
<syntaxhighlight lang="python">>>> setA = set(["John", "Bob", "Mary", "Serena"])
>>> setB = set(["Jim", "Mary", "John", "Bob"])
>>> setA ^ setB # symmetric difference of A and B
Line 371 ⟶ 3,125:
>>> setA - setB # elements in A that are not in B
set(['Serena'])
>>> # and so on...</syntaxhighlight>
There is also a method call interface for these operations. In contrast to the operators above, they accept any iterables as arguments not just sets.
<syntaxhighlight lang="python">>>> setA.symmetric_difference(setB)
{'Jim', 'Serena'}
>>> setA.difference(setB)
{'Serena'}
>>> setB.difference(setA)
{'Jim'}
>>> setA.union(setB)
{'Jim', 'Mary', 'Serena', 'John', 'Bob'}
>>> setA.intersection(setB)
{'Mary', 'John', 'Bob'}</syntaxhighlight>
=={{header|Quackery}}==
<syntaxhighlight lang="quackery"> [ $ "rosetta/bitwisesets.qky" loadfile ] now!
( i.e. using the Quackery code for sets at
http://rosettacode.org/wiki/Set#Indexed_Bitmaps )
set{ John Bob Mary Serena }set is A ( --> { )
set{ Jim Mary John Bob }set is B ( --> { )
say "A \ B is " A B difference echoset cr
say "B \ A is " B A difference echoset cr
say "(A \ B) U (B \ A) is "
A B difference B A difference union echoset cr
say "(A U B) \ (A n B) is "
A B union A B intersection difference echoset cr
say "Using built-in symmetric difference: "
A B symmdiff echoset cr </syntaxhighlight>
{{out}}
<pre>A \ B is { Serena }
B \ A is { Jim }
(A \ B) U (B \ A) is { Jim Serena }
(A U B) \ (A n B) is { Jim Serena }
Using built-in symmetric difference: { Jim Serena }
</pre>
=={{header|R}}==
<syntaxhighlight lang="r">a <- c( "John", "Bob", "Mary", "Serena" )
b <- c( "Jim", "Mary", "John", "Bob" )
c(setdiff(b, a), setdiff(a, b))
a <- c("John", "Serena", "Bob", "Mary", "Serena")
b <- c("Jim", "Mary", "John", "Jim", "Bob")
c(setdiff(b, a), setdiff(a, b)) </syntaxhighlight>
In both cases answer is:
<syntaxhighlight lang="r">[1] "Jim" "Serena"</syntaxhighlight>
=={{header|Racket}}==
<syntaxhighlight lang="racket">
#lang racket
(define A (set "John" "Bob" "Mary" "Serena"))
(define B (set "Jim" "Mary" "John" "Bob"))
(set-symmetric-difference A B)
(set-subtract A B)
(set-subtract B A)
</syntaxhighlight>
=={{header|Raku}}==
(formerly Perl 6)
<syntaxhighlight lang="raku" line>my \A = set <John Serena Bob Mary Serena>;
my \B = set <Jim Mary John Jim Bob>;
say A ∖ B; # Set subtraction
say B ∖ A; # Set subtraction
say (A ∪ B) ∖ (A ∩ B); # Symmetric difference, via basic set operations
say A ⊖ B; # Symmetric difference, via dedicated operator</syntaxhighlight>
{{out}}
<pre>set(Serena)
set(Jim)
set(Jim, Serena)
set(Jim, Serena)</pre>
=={{header|REBOL}}==
<syntaxhighlight lang="rebol">a: [John Serena Bob Mary Serena]
b: [Jim Mary John Jim Bob]
difference a b</syntaxhighlight>
Result is
<pre>
[Serena Jim]
</pre>
=={{header|Refal}}==
<syntaxhighlight lang="refal">$ENTRY Go {
, John Bob Mary Serena: e.A
, Jim Mary John Bob: e.B
= <Prout <Symdiff (e.A) (e.B)>>;
};
Symdiff {
(e.1) (e.2), <Diff (<Set e.1>) (<Set e.2>)>: e.3
, <Diff (<Set e.2>) (<Set e.1>)>: e.4
= <Union (e.3) (e.4)>;
};
Set {
= ;
s.1 e.1 s.1 e.2 = <Set e.1 s.1 e.2>;
s.1 e.1 = s.1 <Set e.1>;
};
Union {
(e.1) (e.2) = <Set e.1 e.2>;
};
Diff {
() (e.1) = ;
(e.1) () = e.1;
(s.1 e.1) (e.2 s.1 e.3) = <Diff (e.1) (e.2 e.3)>;
(s.1 e.1) (e.2) = s.1 <Diff (e.1) (e.2)>;
};</syntaxhighlight>
{{out}}
<pre>Serena Jim</pre>
=={{header|REXX}}==
===version 1===
This REXX version shows the symmetric difference and symmetric ''AND'' between two lists, the lists have duplicate elements to show their proper handling.
The lists (and output) are formatted as a '''set'''.
The '''set''' elements may contain any character permitted with a REXX literal, including the literal character itself (expressed as a double literal delimiter), blanks, brackets, commas, and also a ''null'' value.
<syntaxhighlight lang="rexx">/*REXX program finds symmetric difference and symmetric AND (between two lists). */
a= '["John", "Serena", "Bob", "Mary", "Serena"]' /*note the duplicate element: Serena */
b= '["Jim", "Mary", "John", "Jim", "Bob"]' /* " " " " Jim */
a.=0; SD.=0; SA.=0; SD=; SA= /*falsify booleans; zero & nullify vars*/
a.1=a; say '──────────────list A =' a /*assign a list and display it to term.*/
a.2=b; say '──────────────list B =' b /* " " " " " " " " */
/* [↓] parse the two lists. */
do k=1 for 2 /*process both lists (stemmed array). */
a.k=strip( strip(a.k, , "["), ,']') /*strip leading and trailing brackets. */
do j=1 until a.k='' /*parse names [they may have blanks]. */
a.k=strip(a.k, , ',') /*strip all commas (if there are any). */
parse var a.k '"' _ '"' a.k /*obtain the name of the list. */
a.k.j=_ /*store the name of the list. */
a.k._=1 /*make a boolean value. */
end /*j*/
a.k.0=j-1 /*the number of this list (of names). */
end /*k*/
say /* [↓] find the symmetric difference. */
do k=1 for 2; ko=word(2 1, k) /*process both lists; KO=other list. */
do j=1 for a.k.0; _=a.k.j /*process the list names. */
if \a.ko._ & \SD._ then do; SD._=1 /*if not in both, then ··· */
SD=SD '"'_'",' /*add to symmetric difference list. */
end
end /*j*/
end /*k*/
/* [↓] SD ≡ symmetric difference. */
SD= "["strip( strip(SD), 'T', ",")']' /*clean up and add brackets [ ] to it.*/
say 'symmetric difference =' SD /*display the symmetric difference. */
/* [↓] locate the symmetric AND. */
do j=1 for a.1.0; _=a.1.j /*process the A list names. */
if a.1._ & a.2._ & \SA._ then do; SA._=1 /*if it's common to both, then ··· */
SA=SA '"'_'",' /*add to symmetric AND list. */
end
end /*j*/
say /* [↓] SA ≡ symmetric AND. */
SA= "["strip( strip(SA), 'T', ",")']' /*clean up and add brackets [ ] to it.*/
say ' symmetric AND =' SA /*stick a fork in it, we're all done. */</syntaxhighlight>
{{out|output|text= when using the in-program lists:}}
<pre>
──────────────list A = ["John", "Serena", "Bob", "Mary", "Serena"]
──────────────list B = ["Jim", "Mary", "John", "Jim", "Bob"]
symmetric difference = ["Serena", "Jim"]
symmetric AND = ["John", "Bob", "Mary"]
</pre>
===version 1.5===
This REXX version shows the symmetric difference and symmetric AND between two lists, the lists have items that have imbedded blanks in them as well as some punctuation, and also a ''null'' element.
<syntaxhighlight lang="rexx">/*REXX pgm finds symmetric difference and symm. AND (between two lists).*/
a.=0 /*falsify the booleans*/
a= '["Zahn", "Yi", "Stands with a Fist", "", "Hungry Wolf", "Yi"]'
b= '["Draag Ng [Jr.]", "Patzy", "Zahn", "Yi", "Robert the Bruce"]'
∙
∙
∙</syntaxhighlight>
{{out|output|text= when using the in-program lists (which has imbedded blanks):}}
<pre>
──────────────list A = ["Zahn", "Yi", "Stands with a Fist", "", "Hungry Wolf", "Yi"]
──────────────list B = ["Draag Ng [Jr.]", "Patzy", "Zahn", "Yi", "Robert the Bruce"]
symmetric difference = ["Stands with a Fist", "", "Hungry Wolf", "Draag Ng [Jr.]", "Patzy"]
symmetric AND = ["Zahn", "Yi"]
</pre>
===version 2===
<syntaxhighlight lang="rexx">/* REXX ---------------------------------------------------------------
* 14.12.2013 Walter Pachl a short solution
* 16.12.2013 fix duplicate element problem in input
* 16.12.2013 added duplicate to t.
* Handles only sets the elements of which do not contain blanks
*--------------------------------------------------------------------*/
s='John Bob Mary Serena'
t='Jim Mary John Bob Jim '
Say difference(s,t)
Exit
difference:
Parse Arg a,b
res=''
Do i=1 To words(a)
If wordpos(word(a,i),b)=0 Then
Call out word(a,i)
End
Do i=1 To words(b)
If wordpos(word(b,i),a)=0 Then
Call out word(b,i)
End
Return strip(res)
out: parse Arg e
If wordpos(e,res)=0 Then res=res e
Return</syntaxhighlight>
Output:
<pre>Serena Jim</pre>
=={{header|Ring}}==
<syntaxhighlight lang="ring">
alist = []
blist = []
alist = ["john", "bob", "mary", "serena"]
blist = ["jim", "mary", "john", "bob"]
alist2 = []
for i = 1 to len(alist)
flag = 0
for j = 1 to len(blist)
if alist[i] = blist[j] flag = 1 ok
next
if (flag = 0) add(alist2, alist[i]) ok
next
blist2 = []
for j = 1 to len(alist)
flag = 0
for i = 1 to len(blist)
if alist[i] = blist[j] flag = 1 ok
next
if (flag = 0) add(blist2, blist[j]) ok
next
see "a xor b :" see nl
see alist2
see blist2 see nl
see "a-b :" see nl
see alist2 see nl
see "b-a :" see nl
see blist2 see nl
</syntaxhighlight>
=={{header|RPL}}==
<code>DIFFL</code> is defined at [[Set#RPL|Set]]
{{works with|Halcyon Calc|4.2.9}}
≪ DUP2 <span style="color:blue>DIFFL</span>
ROT ROT SWAP <span style="color:blue>DIFFL</span> +
≫ ≫ '<span style="color:blue>SYMDIFF</span>' STO
{"John" "Bob" "Mary" "Serena"} {"Jim" "Mary" "John" "Bob"} <span style="color:blue>SYMDIFF</span>
{{out}}
<pre>
1: {"Jim" "Serena"}
</pre>
=={{header|Ruby}}==
With arrays:
<syntaxhighlight lang="ruby">a = ["John", "Serena", "Bob", "Mary", "Serena"]
b = ["Jim", "Mary", "John", "Jim", "Bob"]
# the union minus the intersection:
p sym_diff = (a | b)-(a & b) # => ["Serena", "Jim"]</syntaxhighlight>
Class Set has a symmetric difference operator built-in:
<syntaxhighlight lang="ruby">require 'set'
a = Set["John", "Serena", "Bob", "Mary", "Serena"] #Set removes duplicates
b = Set["Jim", "Mary", "John", "Jim", "Bob"]
p sym_diff = a ^ b # => #<Set: {"Jim", "Serena"}></syntaxhighlight>
=={{header|Run BASIC}}==
<syntaxhighlight lang="runbasic">
setA$ = "John,Bob,Mary,Serena"
setB$ = "Jim,Mary,John,Bob"
x$ = b$(setA$,setB$)
print word$(x$,1,",")
c$ = c$ + x$
x$ = b$(setB$,setA$)
print word$(x$,1,",")
print c$;x$
end
function b$(a$,b$)
i = 1
while word$(a$,i,",") <> ""
a1$ = word$(a$,i,",")
j = instr(b$,a1$)
if j <> 0 then b$ = left$(b$,j-1) + mid$(b$,j+len(a1$)+1)
i = i + 1
wend
end function</syntaxhighlight>
<pre>
Jim
Serena
Jim,Serena
</pre>
=={{header|Rust}}==
Both set types in the std-lib -- <b>HashSet</b> and <b>BTreeSet</b> -- implement a symmetric_difference method.
<syntaxhighlight lang="rust">use std::collections::HashSet;
fn main() {
let a: HashSet<_> = ["John", "Bob", "Mary", "Serena"]
.iter()
.collect();
let b = ["Jim", "Mary", "John", "Bob"]
.iter()
.collect();
let diff = a.symmetric_difference(&b);
println!("{:?}", diff);
}
</syntaxhighlight>
{{out}}
<pre>
["Serena", "Jim"]
</pre>
=={{header|Scala}}==
<syntaxhighlight lang="scala">scala> val s1 = Set("John", "Serena", "Bob", "Mary", "Serena")
s1: scala.collection.immutable.Set[java.lang.String] = Set(John, Serena, Bob, Mary)
scala> val s2 = Set("Jim", "Mary", "John", "Jim", "Bob")
s2: scala.collection.immutable.Set[java.lang.String] = Set(Jim, Mary, John, Bob)
scala> (s1 diff s2) union (s2 diff s1)
res46: scala.collection.immutable.Set[java.lang.String] = Set(Serena, Jim)</syntaxhighlight>
=={{header|Scheme}}==
=== Pure R7RS ===
In pure Scheme, to illustrate implementation of the algorithms:
<syntaxhighlight lang="scheme">
(import (scheme base)
(scheme write))
;; -- given two sets represented as lists, return (A \ B)
(define (a-without-b a b)
(cond ((null? a)
'())
((member (car a) (cdr a)) ; drop head of a if it's a duplicate
(a-without-b (cdr a) b))
((member (car a) b) ; head of a is in b so drop it
(a-without-b (cdr a) b))
(else ; head of a not in b, so keep it
(cons (car a) (a-without-b (cdr a) b)))))
;; -- given two sets represented as lists, return symmetric difference
(define (symmetric-difference a b)
(append (a-without-b a b)
(a-without-b b a)))
;; -- test case
(define A '(John Bob Mary Serena))
(define B '(Jim Mary John Bob))
(display "A\\B: ") (display (a-without-b A B)) (newline)
(display "B\\A: ") (display (a-without-b B A)) (newline)
(display "Symmetric difference: ") (display (symmetric-difference A B)) (newline)
;; -- extra test as we are using lists
(display "Symmetric difference 2: ")
(display (symmetric-difference '(John Serena Bob Mary Serena)
'(Jim Mary John Jim Bob))) (newline)
</syntaxhighlight>
{{out}}
<pre>
A\B: (Serena)
B\A: (Jim)
Symmetric difference: (Serena Jim)
Symmetric difference 2: (Serena Jim)
</pre>
=== Using a standard library ===
{{libheader|Scheme/SRFIs}}
SRFI 1 is one of the most popular SRFIs. It deals with lists, but also has functions treating lists as sets. The lset functions assume the inputs are sets, so we must delete duplicates if this property is not guaranteed on input.
<syntaxhighlight lang="scheme">
(import (scheme base)
(scheme write)
(srfi 1))
(define (a-without-b a b)
(lset-difference equal?
(delete-duplicates a)
(delete-duplicates b)))
(define (symmetric-difference a b)
(lset-xor equal?
(delete-duplicates a)
(delete-duplicates b)))
;; -- test case
(define A '(John Bob Mary Serena))
(define B '(Jim Mary John Bob))
(display "A\\B: ") (display (a-without-b A B)) (newline)
(display "B\\A: ") (display (a-without-b B A)) (newline)
(display "Symmetric difference: ") (display (symmetric-difference A B)) (newline)
;; -- extra test as we are using lists
(display "Symmetric difference 2: ")
(display (symmetric-difference '(John Serena Bob Mary Serena)
'(Jim Mary John Jim Bob))) (newline)
</syntaxhighlight>
=={{header|Seed7}}==
<syntaxhighlight lang="seed7">$ include "seed7_05.s7i";
const type: striSet is set of string;
enable_output(striSet);
const proc: main is func
local
const striSet: setA is {"John", "Bob" , "Mary", "Serena"};
const striSet: setB is {"Jim" , "Mary", "John", "Bob" };
begin
writeln(setA >< setB);
end func;</syntaxhighlight>
Output:
<pre>
{Jim, Serena}
</pre>
=={{header|SETL}}==
<syntaxhighlight lang="setl">program symmetric_difference;
A := {"John", "Bob", "Mary", "Serena"};
B := {"Jim", "Mary", "John", "Bob"};
print("A - B:", A - B);
print("B - A:", B - A);
print("Symmetric difference:", (A-B) + (B-A));
end program;</syntaxhighlight>
{{out}}
<pre>A - B: {Serena}
B - A: {Jim}
Symmetric difference: {Jim Serena}</pre>
=={{header|Sidef}}==
<syntaxhighlight lang="ruby">var a = ["John", "Serena", "Bob", "Mary", "Serena"];
var b = ["Jim", "Mary", "John", "Jim", "Bob"];
a ^ b -> unique.dump.say;</syntaxhighlight>
{{out}}
<pre>
["Serena", "Jim"]
</pre>
=={{header|Smalltalk}}==
<
A := Set new.
B := Set new.
Line 381 ⟶ 3,604:
B addAll: #( 'Jim' 'Mary' 'John' 'Bob' ).
( (A - B) + (B - A) ) displayNl.</
Output is
<pre>
Set ('Jim' 'Serena' )
</pre>
=={{header|SQL}}/{{header|PostgreSQL}}==
<syntaxhighlight lang="sql">create or replace function arrxor(anyarray,anyarray) returns anyarray as $$
select ARRAY(
(
select r.elements
from (
(select 1,unnest($1))
union all
(select 2,unnest($2))
) as r (arr, elements)
group by 1
having min(arr) = max(arr)
)
)
$$ language sql strict immutable;</syntaxhighlight>
Usage:
<syntaxhighlight lang="sql">select arrxor('{this,is,a,test}'::text[],'{also,part,of,a,test}'::text[]);</syntaxhighlight>
Output:
<pre>
arrxor
------------------------
also,is,of,part,this
</pre>
=={{header|Swift}}==
Swift's <code>Set</code> type supports difference as well as symmetric difference operators.
{{works with|Swift|1.2+}}
<syntaxhighlight lang="swift">let setA : Set<String> = ["John", "Bob", "Mary", "Serena"]
let setB : Set<String> = ["Jim", "Mary", "John", "Bob"]
println(setA.exclusiveOr(setB)) // symmetric difference of A and B
println(setA.subtract(setB)) // elements in A that are not in B</syntaxhighlight>
{{out}}
<pre>
["Jim", "Serena"]
["Serena"]
</pre>
=={{header|Tcl}}==
It's common to represent sets as an unordered list of elements. (It is also the most efficient representation.) The <code>struct::set</code> package contains operations for working on such sets-as-lists.
{{tcllib|struct::set}}
<syntaxhighlight lang="tcl">package require struct::set
set A {John Bob Mary Serena}
Line 406 ⟶ 3,664:
# Of course, the library already has this operation directly...
puts "Direct Check: [struct::set symdiff $A $B]"</
Produces this output:<pre>
A\B = Serena
Line 413 ⟶ 3,671:
Direct Check: Jim Serena
</pre>
=={{header|TUSCRIPT}}==
<syntaxhighlight lang="tuscript">$$ MODE TUSCRIPT
a="John'Bob'Mary'Serena"
b="Jim'Mary'John'Bob"
DICT names CREATE
SUBMACRO checknames
!var,val
PRINT val,": ",var
LOOP n=var
DICT names APPEND/QUIET n,num,cnt,val;" "
ENDLOOP
ENDSUBMACRO
CALL checknames (a,"a")
CALL checknames (b,"b")
DICT names UNLOAD names,num,cnt,val
LOOP n=names,v=val
PRINT n," in: ",v
ENDLOOP</syntaxhighlight>
Output:
<pre>
a: John'Bob'Mary'Serena
b: Jim'Mary'John'Bob
John in: a b
Bob in: a b
Mary in: a b
Serena in: a
Jim in: b
</pre>
=={{header|UNIX Shell}}==
{{works with|Bash}}
<syntaxhighlight lang="bash">uniq() {
u=("$@")
for ((i=0;i<${#u[@]};i++)); do
for ((j=i+1;j<=${#u[@]};j++)); do
[ "${u[$i]}" = "${u[$j]}" ] && unset u[$i]
done
done
u=("${u[@]}")
}
a=(John Serena Bob Mary Serena)
b=(Jim Mary John Jim Bob)
uniq "${a[@]}"
au=("${u[@]}")
uniq "${b[@]}"
bu=("${u[@]}")
ab=("${au[@]}")
for ((i=0;i<=${#au[@]};i++)); do
for ((j=0;j<=${#bu[@]};j++)); do
[ "${ab[$i]}" = "${bu[$j]}" ] && unset ab[$i]
done
done
ab=("${ab[@]}")
ba=("${bu[@]}")
for ((i=0;i<=${#bu[@]};i++)); do
for ((j=0;j<=${#au[@]};j++)); do
[ "${ba[$i]}" = "${au[$j]}" ] && unset ba[$i]
done
done
ba=("${ba[@]}")
sd=("${ab[@]}" "${ba[@]}")
echo "Set A = ${a[@]}"
echo " = ${au[@]}"
echo "Set B = ${b[@]}"
echo " = ${bu[@]}"
echo "A - B = ${ab[@]}"
echo "B - A = ${ba[@]}"
echo "Symmetric difference = ${sd[@]}"</syntaxhighlight>
Output:
<pre>Set A = John Serena Bob Mary Serena
= John Bob Mary Serena
Set B = Jim Mary John Jim Bob
= Mary John Jim Bob
A - B = Serena
B - A = Jim
Symmetric difference = Serena Jim</pre>
=={{header|Ursala}}==
<
b = <'Jim','Mary','John','Bob'>
Line 427 ⟶ 3,773:
'a not b': ~&j/a b,
'b not a': ~&j/b a,
'symmetric difference': ~&jrljTs/a b></
output:
<pre><
Line 435 ⟶ 3,781:
'b not a': <'Jim'>,
'symmetric difference': <'Jim','Serena'>></pre>
=={{header|V (Vlang)}}==
<syntaxhighlight lang="v (vlang)">
const
(
alist = ["john", "bob", "mary", "serena"]
blist = ["jim", "mary", "john", "bob"]
)
fn main() {
mut rlist := []string{}
for elem in alist {
if blist.any(it == elem) == false {
println("a - b = $elem")
rlist << elem
}
}
for elem in blist {
if alist.any(it == elem) == false {
println("b - a = $elem")
rlist << elem
}
}
println("symmetric difference: $rlist")
}
</syntaxhighlight>
{{out}}
<pre>
a - b = serena
b - a = jim
symmetric difference: ['serena', 'jim']
</pre>
=={{header|Wren}}==
{{libheader|Wren-set}}
<syntaxhighlight lang="wren">import "./set" for Set
var symmetricDifference = Fn.new { |a, b| a.except(b).union(b.except(a)) }
var a = Set.new(["John", "Bob", "Mary", "Serena"])
var b = Set.new(["Jim", "Mary", "John", "Bob"])
System.print("A = %(a)")
System.print("B = %(b)")
System.print("A - B = %(a.except(b))")
System.print("B - A = %(b.except(a))")
System.print("A △ B = %(symmetricDifference.call(a, b))")</syntaxhighlight>
{{out}}
<pre>
A = <Serena, Bob, Mary, John>
B = <Jim, Bob, Mary, John>
A - B = <Serena>
B - A = <Jim>
A △ B = <Serena, Jim>
</pre>
=={{header|XPL0}}==
An integer in XPL0 can represent a set of up to 32 elements, and bitwise Boolean
operations can represent union, intersection, and difference.
<syntaxhighlight lang="xpl0">def John, Bob, Mary, Serena, Jim; \enumerate set items (0..4)
proc SetOut(S); \Output the elements in set
int S;
int Name, I;
[Name:= ["John", "Bob", "Mary", "Serena", "Jim"];
for I:= 0 to 31 do
if S & 1<<I then
[Text(0, Name(I)); ChOut(0, ^ )];
CrLf(0);
];
int A, B;
[A:= 1<<John ! 1<<Bob ! 1<<Mary ! 1<<Serena;
B:= 1<<Jim ! 1<<Mary ! 1<<John ! 1<<Bob;
Text(0, "A xor B = "); SetOut(A | B);
Text(0, "A\B = "); SetOut(A & ~B);
Text(0, "B\A = "); SetOut(B & ~A);
Text(0, "A\B U B\A = "); SetOut(A&~B ! B&~A);
]</syntaxhighlight>
{{out}}
<pre>
A xor B = Serena Jim
A\B = Serena
B\A = Jim
A\B U B\A = Serena Jim
</pre>
=={{header|Yabasic}}==
<syntaxhighlight lang="yabasic">lista1$ = "John Serena Bob Mary Serena"
lista2$ = "Jim Mary John Jim Bob"
lista1$ = quitadup$(lista1$)
lista2$ = quitadup$(lista2$)
res$ = quitacomun$(lista1$, lista2$)
res$ = res$ + quitacomun$(lista2$, lista1$)
print res$
sub quitadup$(l$)
l$ = l$ + " "
return quitarep$(l$)
end sub
sub quitacomun$(l1$, l2$)
l1$ = l1$ + " "
l2$ = l2$ + " "
return quitarep$(l1$, l2$)
end sub
sub quitarep$(l1$, l2$)
local pos, n, x, listar$, nombre$, largo
largo = len(l1$)
pos = 1
while(true)
n = instr(l1$, " ", pos)
if n > 0 then
nombre$ = mid$(l1$, pos, n-pos)
if numparams = 1 then
x = instr(listar$, nombre$)
else
x = instr(l2$, nombre$)
end if
if x = 0 listar$ = listar$ + nombre$ + " "
pos = n + 1
else
return listar$
end if
wend
end sub
</syntaxhighlight>
=={{header|zkl}}==
<syntaxhighlight lang="zkl">fcn setCommon(list1,list2){ list1.filter(list2.holds); }
fcn sdiff(list1,list2)
{ list1.extend(list2).copy().removeEach(setCommon(list1,list2)) }</syntaxhighlight>
<syntaxhighlight lang="zkl">a:=T("John","Bob","Mary","Serena");
b:=T("Jim","Mary","John","Bob");
sdiff(a,b).println();</syntaxhighlight>
To deal with duplicates, use [[Remove duplicate elements#zkl]]:
<syntaxhighlight lang="zkl">a:=T("John", "Serena", "Bob", "Mary", "Serena");
b:=T("Jim", "Mary", "John", "Jim", "Bob");
sdiff(a,b) : Utils.Helpers.listUnique(_).println();</syntaxhighlight>
{{out}}
<pre>
L("Serena","Jim")
L("Serena","Jim")
</pre>
| |||