Run as a daemon or service

From Rosetta Code
Revision as of 12:35, 11 December 2018 by Hkdtam (talk | contribs) (added Perl 6)
Run as a daemon or service is a draft programming task. It is not yet considered ready to be promoted as a complete task, for reasons that should be found in its talk page.

A daemon is a service that runs in the background independent of a users login session.

Demonstrate how a program disconnects from the terminal to run as a daemon in the background.

Write a small program that writes a message roughly once a second to its stdout which should be redirected to a file.

Note that in some language implementations it may not be possible to disconnect from the terminal, and instead the process needs to be started with stdout (and stdin) redirected to files before program start. If that is the case then a helper program to set up this redirection should be written in the language itself. A shell wrapper, as would be the usual solution on Unix systems, is not appropriate.

C

Library: BSD libc

BSD provides a convenient daemon(3) function. GNU libc also provides daemon(3), but POSIX omits it, so it is not portable. Other BSDisms in this program are __progname and <err.h>.

The task also wants to redirect stdout. This program does so with dup2(2). Had we wanted to directly write to a file, we could open the file with file = fopen(argv[1], "a"), and write to file instead of stdout.

<lang c>#include <err.h>

  1. include <errno.h>
  2. include <fcntl.h>
  3. include <stdlib.h>
  4. include <stdio.h>
  5. include <string.h>
  6. include <syslog.h>
  7. include <time.h>
  8. include <unistd.h>

int main(int argc, char **argv) { extern char *__progname; time_t clock; int fd;

if (argc != 2) { fprintf(stderr, "usage: %s file\n", __progname); exit(1); }

/* Open the file before becoming a daemon. */ fd = open(argv[1], O_WRONLY | O_APPEND | O_CREAT, 0666); if (fd < 0) err(1, argv[1]);

/* * Become a daemon. Lose terminal, current working directory, * stdin, stdout, stderr. */ if (daemon(0, 0) < 0) err(1, "daemon");

/* Redirect stdout. */ if (dup2(fd, STDOUT_FILENO) < 0) { syslog(LOG_ERR, "dup2: %s", strerror(errno)); exit(1); } close(fd);

/* Dump clock. */ for (;;) { time(&clock); fputs(ctime(&clock), stdout); if (fflush(stdout) == EOF) { syslog(LOG_ERR, "%s: %s", argv[1], strerror(errno)); exit(1); } sleep(1); /* Can wake early or drift late. */ } }</lang> 

$ make dumper
cc -O2 -pipe    -o dumper dumper.c 
$ ./dumper dump
$ tail -f dump
Fri Nov 18 13:50:41 2011
Fri Nov 18 13:50:42 2011
Fri Nov 18 13:50:43 2011
Fri Nov 18 13:50:44 2011
Fri Nov 18 13:50:45 2011
^C
$ pkill -x dumper
$ rm dump

PARI/GP

GP scripts cannot run in this fashion directly, but can be compiled into PARI code with gp2c. PARI code, whether from gp2c or not, can be run as a daemon just as C would be.

Perl 6

<lang perl6>#!/usr/bin/env perl6

  1. Reference:
  2. https://github.com/hipek8/p6-UNIX-Daemonize/

use v6; use UNIX::Daemonize; use File::Temp;

my ($output, $filehandle) = tempfile(:tempdir("/tmp"),:!unlink) or die;

say "Output now goes to ",$output;

daemonize();

loop { 

  sleep(1);
  spurt $output, DateTime.now.Str~"\n", :append;

}</lang>

Output:
root@ubuntu:~# su - david

david@ubuntu:~$ ./dumper.p6
Output now goes to /tmp/x2ovx9JG8b
david@ubuntu:~$ tail -f /tmp/x2ovx9JG8b
2018-12-11T20:20:01.510484+08:00
2018-12-11T20:20:02.513732+08:00
2018-12-11T20:20:03.517063+08:00
2018-12-11T20:20:04.520394+08:00
2018-12-11T20:20:05.524871+08:00
2018-12-11T20:20:06.528244+08:00
2018-12-11T20:20:07.531985+08:00
2018-12-11T20:20:08.537776+08:00
2018-12-11T20:20:09.541606+08:00
2018-12-11T20:20:10.545796+08:00
2018-12-11T20:20:11.549047+08:00
2018-12-11T20:20:12.552704+08:00
^C
david@ubuntu:~$ exit
logout
root@ubuntu:~# tail -f /tmp/x2ovx9JG8b
2018-12-11T20:20:28.623690+08:00
2018-12-11T20:20:29.626978+08:00
2018-12-11T20:20:30.634309+08:00
2018-12-11T20:20:31.637481+08:00
2018-12-11T20:20:32.640794+08:00
2018-12-11T20:20:33.643947+08:00
2018-12-11T20:20:34.647146+08:00
2018-12-11T20:20:35.651008+08:00
^C
root@ubuntu:~# su - david
david@ubuntu:~$ tail -f /tmp/x2ovx9JG8b
2018-12-11T20:20:51.711357+08:00
2018-12-11T20:20:52.715044+08:00
2018-12-11T20:20:53.718921+08:00
2018-12-11T20:20:54.722134+08:00
2018-12-11T20:20:55.725970+08:00
2018-12-11T20:20:56.729160+08:00
2018-12-11T20:20:57.732376+08:00
2018-12-11T20:20:58.735409+08:00
2018-12-11T20:20:59.738886+08:00
2018-12-11T20:21:00.743045+08:00
2018-12-11T20:21:01.748113+08:00
2018-12-11T20:21:02.753204+08:00
2018-12-11T20:21:03.756665+08:00
2018-12-11T20:21:04.759902+08:00
^C
david@ubuntu:~$ pkill -c moar
1

PicoLisp

<lang PicoLisp>(unless (fork) 

  (out "file.log"
     (println *Pid)    # First write the daemon's PID to the file
     (for N 3600       # Write count for about one hour (if not killed)
        (wait 1000)
        (println N)
        (flush) ) )
  (bye) )              # Child terminates after one hour

(bye) # Parent terminates immediately</lang>

Pike

__FILE__ is a preprocessor definition that contains the current filename. if the first argument is "daemon" the program will be restarted with stdout redirected to "foo".

<lang Pike>int main(int argc, array argv) { 

   if (sizeof(argv)>1 && argv[1] == "daemon")
   {
       Stdio.File newout = Stdio.File("foo", "wc");
       Process.spawn_pike(({ __FILE__ }), ([ "stdout":newout ]));
       return 1;
   }

   int i = 100;
   while(i--)
   {
       write(i+"\n");
       sleep(0.1);
   }

}</lang>

Racket

<lang racket>

  1. lang racket

(require ffi/unsafe) ((get-ffi-obj 'daemon #f (_fun _int _int -> _int)) 0 0) (with-output-to-file "/tmp/foo" 

 (λ() (for ([i 10]) (displayln (random 1000)) (flush-output) (sleep 1))))

</lang>

Sidef

When the "daemon" argument is specified, a fork of the program is created with its STDOUT redirected into the file "foo.txt", and the main process is exited. <lang ruby>var block = { 

   for n in (1..100) {
       STDOUT.say(n)
       Sys.sleep(0.5)
   }

}

if (ARGV[0] == 'daemon') { 

   STDERR.say("Daemon mode")
   STDOUT{:fh} = %f'foo.txt'.open_w(){:fh}
   STDOUT.autoflush(true)
   block.fork
   STDERR.say("Exiting")
   Sys.exit(0)

}

STDERR.say("Normal mode") block.run</lang>

Tcl

Tcl doesn't come with tools for converting the process into a daemon, but can build them easily enough. Here's the BSD daemon function mapped into a Tcl command in a package.

Library: Critcl

<lang tcl>package provide daemon 1 package require critcl

critcl::ccode { 

   #include <stdlib.h>

} critcl::cproc daemon {Tcl_Interp* interp} ok { 

   if (daemon(0, 0) < 0) {

Tcl_AppendResult(interp, "cannot switch to daemon operation: ", Tcl_PosixError(interp), NULL); return TCL_ERROR; 

   }
   return TCL_OK;

}</lang> These tools can then be used to solve this task: <lang tcl>### Command line argument parsing if {$argc < 1} { 

   puts "usage: $argv0 file ?message...?"
   exit 1

} elseif {$argc == 1} { 

   set filename [lindex $argv 0]
   set message "Hi there!"

} else { 

   set message [join [lassign $argv filename]]

}

      1. Daemonize

package require daemon daemon close stdout; open $filename  ;# Redirects stdout!

      1. Print the message to the file every second until killed

proc every {ms body} {eval $body; after $ms [info level 0]} every 1000 {puts "[clock format [clock seconds]]: $message"} vwait forever</lang> On Windows, there is a commercial extension to Tcl which allows a script to be installed as a service. Such a script would be much like the one above, but without the daemonization section as that has become a property of the runtime.

Retrieved from "https://rosettacode.org/wiki/Run_as_a_daemon_or_service?oldid=207111"