Inverted syntax

Inverted syntax
You are encouraged to solve this task according to the task description, using any language you may know.

Inverted syntax with conditional expressions

In traditional syntax conditional expressions are usually shown before the action within a statement or code block:

<lang pseudocode> IF raining=true THEN needumbrella=true </lang>

In inverted syntax, the action is listed before the conditional expression in the statement or code block:

<lang pseudocode> needumbrella=true IF raining=true </lang>

Inverted syntax with assignment

In traditional syntax, assignments are usually expressed with the variable appearing before the expression:

<lang pseudocode> a = 6</lang>

In inverted syntax, the expression appears before the variable: <lang pseudocode> 6 = a</lang>

Task

The task is to demonstrate support for inverted syntax forms within the language by showing both the traditional and inverted forms.

6502 Assembly

Branching

Conditional branches are limited in the range they can branch; all branch statements cannot be more than 127 or -128 bytes away from their destination.

The below example will result in an assemble time error. The intended action is that the X variable is decremented, and execution returns to the top of the loop. However, the branch is simply too far away. <lang 6502asm>loop_MySubroutine:

more than 127 bytes of code

dex bne loop_MySubroutine ;assembler will display an error message that the branch is too far away.

rest of program</lang>

The easiest way to overcome this limitation is to invert the branch condition and place a JMP back to the loop under it. An unconditional JMP moves the program counter to the specified location, no matter where that is.

<lang 6502asm>loop_mySubroutine:

more than 127 bytes of code

dex beq continue

    JMP loop_mySubroutine

continue:

rest of program</lang>

Now, what happens is that the opposite condition is checked. If X = 0, execution branches 3 bytes forward to "continue." Otherwise, the statement underneath the branch is executed, which is a jump back to the top.

16-Bit Data

Being a little-endian CPU, the "low byte" (rightmost 2 digits) of a 16-bit (4-digit) hexadecimal number is stored before the "high byte" (leftmost 2 digits). This is difficult for a human to read but easier for the CPU. The assembler allows the programmer to use a dw or word directive to define 16-bit data values in a manner easier for a person to read. The assembler swaps the order of the bytes automatically when assembling the source code. <lang 6502asm>word $BEEF byte $EF,$BE</lang>

A hexdump of these bytes would display them the same, i.e.:

EF BE EF BE

Ada

The only place where syntax is kind of inverted is exit when to exit loops:

<lang Ada>Foo := 1; loop

  exit when Foo = 10;
  Foo := Foo + 1;

end loop;</lang>

ALGOL 68

Works with: ALGOL 68G version Any - tested with release 2.8.win32

<lang algol68># Inverted assignment #

1. Assignment in Algol 68 is via ":=" which is automaically provided for all modes (types) #
2. However we could define e.g. "=:" as an inverted assignment operator but we would need to #
3. define a separate operator for each mode, e.g. for integers and strings: #

PRIO =: = 1; OP =: = ( INT a, REF INT b )REF INT: b := a; OP =: = ( STRING a, REF STRING b )REF STRING: b := a; OP =: = ( CHAR a, REF STRING b )REF STRING: b := a; INT a, b; STRING s;

   1 =: a;

a + 1 =: b;

 "?" =: s;

print( ( a, b, s, newline ) );

1. There is one standard inverted assignment operator: +=: or PLUSTO which prepends a string #
2. to another: #

"bc" =: s; "b" +=: s; print( ( s, newline ) );

1. Inverted Conditional Expressions #
2. We could define an operator called WHEN perhaps, that would execute its left operand if #
3. the right operand was TRUE. However the left operand would need to be a PROC VOID so the #
4. syntax would not be as convientent as the standard IF-THEN-FI construct. E.g.: #

PRIO WHEN = 1; OP WHEN = ( PROC VOID code, BOOL test )VOID: IF test THEN code FI;

( VOID: print( ( "NO", newline ) ) ) WHEN a = b; # the anonymous PROC VOID is not called # ( VOID: print( ( "yes", newline ) ) ) WHEN a /= b # the anonymous PROC VOID is called #</lang>

Output:

         +1         +2?
bbc
yes

ARM Assembly

Typically, instructions with a destination register and a source register will have the leftmost register be the destination and the registers to the right be the source.

<lang ARM Assembly>MOV R0,R3 ;copy R3 to R0 ADD R2,R1,R5 ;add R1 to R5 and store the result in R2.</lang>

However there is one exception: the STR command. Its source is on the left and its destination is on the right. This inverted syntax is not optional. <lang ARM Assembly>STR r0,[r4] ;store the contents of R0 into the memory location specified by R4.</lang>

This was most likely done for symmetry with the "push/pop" commands: <lang ARM Assembly>STMFD sp!,{r0-r12,lr} ;push r0 thru r12 and the link register LDMFD sp!,{r0-r12,pc} ;pop r0 thru r12, and the value that was in the link register is popped into the program counter.</lang>

Arturo

In this case, we can define a reversed if-statement function (taking the block first, then the condition) and then "alias" a new symbol to it, as an infix operator (so that the block actually comes first, in terms of syntax:

<lang rebol>ifStatement: function [block, condition][

   if condition -> do block

] alias.infix {??} 'ifStatement

do [

   variable: true
   [print "Variable is true!"] ?? variable

]</lang>

Output:

Variable is true!

Bracmat

The match operator : can play the role of an inverted assignment operator =. The following two definitions of a function double are equivalent. <lang bracmat> double=.!arg+!arg;

(=.!arg+!arg):(=?double); { inverted assignment syntax, same result as above. } </lang> Bracmat evaluates all left hand sides of all binary operators. How right hand sides are treated depends on the operator. The = operator does not evaluate its right hand side at all. The right hand side of the : operator is evaluated by a dedicated match evaluator, which for example sees the expression ?double as a variable to be bound to some part of the left hand side of the : operator.

The following two assignments are not equivalent: <lang bracmat>foo=3+7 { assigns 3+7 to foo } 3+7:?foo { assigns 10 to foo } </lang>

C

C doesn't have a way to do this cleanly. You need to drop some code before the statements you want to invert. I'll use CPP to make it look as close as I think you can make it. -- ksb, Jan 2013

The original would be "if (foo()) a = 4;" Here is the inverted if logic using "otherwise ... given () ;"

<lang c>

1. include <stdio.h>
2. include <stdlib.h>
3. define otherwise do { register int _o = 2; do { switch (_o) { case 1:
4. define given(Mc) ;case 0: break; case 2: _o = !!(Mc); continue; } break; } while (1); } while (0)

int foo() { return 1; }

main() {

       int a = 0;

       otherwise  a = 4 given (foo());
       printf("%d\n", a);
       exit(0);

} </lang>

Which actually makes the main program look like:

<lang C> main() {

       int a = 0;

       do {
               register int _o = 2;
               do {
                       switch (_o) {
                       case 1:
                               a = 4;
                       case 0:
                               break;
                       case 2:
                               _o = !!(foo());
                               continue;
                       } break;
               } while (1);
       } while (0);
       printf("%d\n", a);
       exit(0);

} </lang>

To make lint happy you need a /*FALLTHROUGH*/ before the case 0 (in the macro).

C++

Though rarely, if ever, used in practice, user-defined class types can have inverted syntax with assignment. <lang cpp>class invertedAssign {

 int data;

public:

 invertedAssign(int data):data(data){}
 int getData(){return data;}
 void operator=(invertedAssign& other) const {
   other.data = this->data;
 }

};

1. include <iostream>

int main(){

 invertedAssign a = 0;
 invertedAssign b = 42;
 std::cout << a.getData() << ' ' << b.getData() << '\n';

 b = a;

 std::cout << a.getData() << ' ' << b.getData() << '\n';

}</lang>

It doesn't work if the left operand is not of the type invertedAssign.

Clojure

The "thread last" macro permits inversion of syntax in virtually all contexts. Any form for which the construction of a new list from consecutive elements doesn't change the semantics may be turned "inside-out"; this is to the exclusion of those containing function definitions and little else.

<lang Clojure>; normal (if (= 1 1)

 (print "Math works."))

inverted

(->> (print "Math still works.")

    (if (= 1 1)))

a la Haskell

(->> (print a " is " b)

    (let [a 'homoiconicity
          b 'awesome]))</lang>

Expanding the macro reveals the nature of the aforementioned limitation. <lang Clojure>((fn [x] (* x x) 5) ; Define a lambda and call it with 5.

(macroexpand-1 '(->> 5 (fn [x] (* x x)))) (fn [x] (* x x) 5)  ; Define a lambda that returns 5 regardless.</lang>

The "thread first" macro (colloquially, the Thrush) provides a similar facility, wherein each expression becomes the first argument to the next. <lang Clojure>(= (mod (inc 42) 7)

  (-> 42 inc (mod 7)))</lang>

CoffeeScript

CoffeeScript allows loop constructs and conditionals to be written in a suffix manner. Loop constructs evaluate to an array containing the result of each iteration; conditionals evaluates either the true-case expression or the false-case one.

<lang coffeescript>alert "hello" if true alert "hello again" unless false # the same as the above; unless is a negated if.

idx = 0 arr = (++idx while idx < 10) # arr is [1,2,3,4,5,6,7,8,9,10]

idx = 0 arr = (++idx until idx is 10) # same as above; until is an inverted while.</lang>

Common Lisp

Lisp has a PROGN macro for evaluating a bunch of forms, such that the value(s) of the last one is yielded as the result of the PROGN. We can create a reversed analog of PROGN, inside which, we must write the syntax backwards: arguments first, then the operator. Furthermore, this rule is recursively applied to expressions.

Note: unfortunately this is completely naive. To do this 100% right, we need a code walker, which is more complicated. However, code walkers are used in practice for hairy language transformation jobs, just not commonly so in daily Lisp programming. A code walker would let us imlement a more smarter version which would apply the transformation to forms which are evaluated, and not things like literal data. As it is, our macro also transforms literal data, making it impossible, for instance, to use the quote shorthand 'FORM. This stands for (QUOTE FORM) and of course, the macro will treat it as reversed syntax, transforming it to (FORM QUOTE). We could hack in a special case which recognized QUOTE, but then we do not know whether or not (QUOTE FORM) is in a context where it is being evaluated. That is why we need the code walker. It's best to use someone's well-tested, portable code-walker, since they are not trivial to write, and they have some implementation-specific parts (such as recognition of compiler-specific forms that come out of system macros or perhaps out of user-written nonportable code).

<lang lisp>(eval-when (:compile-toplevel :load-toplevel :execute)

 (defun unrev-syntax (form)
   (cond
     ((atom form) form)
     ((null (cddr form)) form)
     (t (destructuring-bind (oper &rest args) (reverse form)
          `(,oper ,@(mapcar #'unrev-syntax args)))))))

(defmacro rprogn (&body forms)

 `(progn ,@(mapcar #'unrev-syntax forms)))</lang>

Interactive test run:

$ clisp -q -i reverse.lisp
;; Loading file reverse.lisp ...
;; Loaded file reverse.lisp
[1]> (rprogn ((1 2 +) (3 4 +) *))
21
[2]> (rprogn (("not greater" print) ("greater" print) (1 2 >) if))

"greater"
"greater"
[3]> (macroexpand '(rprogn (("not greater" print) ("greater" print) (1 2 >) if)))
(PROGN (IF (> 2 1) (PRINT "greater") (PRINT "not greater"))) ;
T

Now here is a slightly more complicated version which more closely conforms to the idea given in this task. The operator is assumed to be the second-last element of a form. The last element of the form is the first argument, and the forms prior to the operator are the remaining arguments (in reverse order). These rules are recursively applied to each of the arguments, but not to the operator. A two element form is assumed to be (argument operator), and is rewritten to (operator argument*) where argument* is the result of applying the unreversal to the argument:

<lang lisp>(eval-when (:compile-toplevel :load-toplevel :execute)

 (defun unrev-syntax (form)
   (cond
     ((atom form) form) ;; atom: leave alone
     ((null (cdr form)) form) ;; one-element form: leave alone
     ((null (cddr form)) ;; two-element form: swap
      (destructuring-bind (arg oper) form
        `(,oper ,(unrev-syntax arg))))
     (t    ;; two or more args: swap last two, add others in reverse
      (destructuring-bind (arg1 oper &rest args) (reverse form)
       `(,oper ,(unrev-syntax arg1) ,@(mapcar #'unrev-syntax args)))))))

(defmacro rprogn (&body forms)

 `(progn ,@(mapcar #'unrev-syntax forms)))</lang>

[1]> (rprogn ((1 + 2) * (3 + 4)))
21
[2]> (rprogn (("not equal" print) ("equal" print) if (1 = 2)))

"not equal"
"not equal"
[3]> (rprogn (("not equal" print) ("equal" print) if (1 = 1)))

"equal"
"equal"
[4]> (macroexpand '(rprogn (("not equal" print) ("equal" print) if (1 = 1))))
(PROGN (IF (= 1 1) (PRINT "equal") (PRINT "not equal"))) ;
T
[5]> (macroexpand '(rprogn ((1 + 2) * (3 + 4))))
(PROGN (* (+ 4 3) (+ 2 1))) ;
T

D

D enables a function to be called as if it were a method of its first argument. This feature often leads to natural syntax and readable, left-to-right expressions:

<lang d>#!/usr/bin/rdmd

import std.algorithm;

void main() {

   assert("Hello, World".length == 12);
   assert("Cleanliness".startsWith("Clean"));

   auto r = [1, 4, 2, 8, 5, 7]
       .filter!(n => n > 2)
       .map!(n => n * 2);

   assert(r.equal([8, 16, 10, 14]));

}</lang>

EchoLisp

<lang scheme>

use reader macros to transform (a OP b) into (OP b a)

(lib 'match) (define-macro invert-= (a <- b) (set! b a)) (define-macro invert-IF (a 'IF b) (when b a))

(define raining #f)

(#t <- raining) raining

   → #t

('umbrella-need IF raining)

   → umbrella-need

(#f <- raining) ('umbrella-need IF raining)

   → #f

debug mode

(debug 3) ('umbrella-need IF raining) 💡 [0] invert-IF → ('umbrella-need IF raining) compiled :: (#when raining 'umbrella-need)

</lang>

Factor

Since code is data in Factor, we can simply reverse it, transforming postfix into "prefix." <lang Factor>1 1 + ! 2 [ + 1 1 ] reverse call ! 2 { 1 2 3 4 5 } [ sq ] map ! { 1 4 9 16 25 } [ map [ sq ] { 1 2 3 4 5 } ] reverse call ! { 1 4 9 16 25 }</lang>

In fact, using a Lisp-style macro, we can perform this transformation at parse time:

<lang factor>MACRO: pre ( quot -- quot ) reverse ;

[ + 2 2 ] pre ! 4</lang>

Of course, this isn't true prefix because + retains its arity of 2:

<lang factor>[ + 3 + 2 2 ] pre ! 7</lang>

We can define a more accurate prefix macro for addition and subtraction in terms of reduce:

<lang factor>MACRO: pre ( quot -- quot ) 1 cut swap [ 0 ] dip reduce 1quotation ;

[ + 1 2 3 4 5 ] pre ! 15</lang>

Additionally, using parsing words, we can add any syntax we like. The infix vocabulary is an example of this:

<lang factor>USE: infix [infix

   5*(1+1) ! 10

infix]</lang>

Fortran

Leaving aside those who think that Fortran is inherently backward, assignment in Fortran is firmly right-to-left in the form variable = expression where the expression is computed in accordance with the precedence rules and the resulting value is assigned to the variable.

However, assignment-style constructions appear inside the INQUIRE statement as in <lang Fortran> INQUIRE(FILE = FILENAME(1:L), EXIST = MAYBE, ERR = 666, IOSTAT = RESULT) </lang> Here, a logical variable MAYBE is to receive the value of whether or not the disc file named in FILENAME(1:L) exists, and integer variable RESULT contains an error code, zero if all went well - the file name may not be correctly formed, for example. Thus, FILE is receiving a value right-to-left on entry to the statement, while MAYBE and RESULT receive values left-to-right on exit from the statement. Despite appearances, ERR = 666 is not an assignment statement; 666 is not an integer, it is a statement label to which execution will jump should an error arise. Similar arrangements apply for the file OPEN and CLOSE statements.

There is no deviationism with the workings of IF-statements.

FreeBASIC

FreeBASIC has nothing like this built into the language. The nearest we can get is to define macros which reverse the order of the arguments: <lang freebasic>' FB 1.05.0 Win64

1. Define ThenIf(a, b) If b Then a
2. Define InvertAssign(a, b) b = a

Dim As Boolean needUmbrella = False, raining = True ThenIf(needUmbrella = True, raining = True) Print "needUmbrella = "; needUmbrella

Dim As Integer b = 0, a = 3 InvertAssign(a, b) Print "b is"; b Sleep</lang>

Output:

needUmbrella = true
b is 3

Fōrmulæ

Fōrmulæ programs are not textual, visualization/edition of programs is done showing/manipulating structures but not text. Moreover, there can be multiple visual representations of the same program. Even though it is possible to have textual representation —i.e. XML, JSON— they are intended for storage and transfer purposes more than visualization and edition.

Programs in Fōrmulæ are created/edited online in its website, However they run on execution servers. By default remote servers are used, but they are limited in memory and processing power, since they are intended for demonstration and casual use. A local server can be downloaded and installed, it has no limitations (it runs in your own computer). Because of that, example programs can be fully visualized and edited, but some of them will not run if they require a moderate or heavy computation/memory resources, and no local server is being used.

In this page you can see the program(s) related to this task and their results.

Go

The closest Go can get to inverted syntax for conditionals is to define a new type ('ibool' say) based on the built-in 'bool' type and then define a method ('iif' say) on the new type which takes the place of the traditional 'if'.

Simulating inverted syntax with assignment is not possible. <lang go>package main

import "fmt"

type ibool bool

const itrue ibool = true

func (ib ibool) iif(cond bool) bool {

   if cond {
       return bool(ib)
   }
   return bool(!ib)

}

func main() {

   var needUmbrella bool
   raining := true

   // normal syntax
   if raining {
       needUmbrella = true
   }
   fmt.Printf("Is it raining? %t. Do I need an umbrella? %t\n", raining, needUmbrella)

   // inverted syntax
   raining = false
   needUmbrella = itrue.iif(raining)
   fmt.Printf("Is it raining? %t. Do I need an umbrella? %t\n", raining, needUmbrella)

}</lang>

Output:

Is it raining? true. Do I need an umbrella? true
Is it raining? false. Do I need an umbrella? false

Haskell

Because Haskell is an expression-based pure functional language, this cannot be defined in the general case, because not every expression has a type with a null-like default value that can be inferred.

However, for the common case where you want to perform a certain action only when some condition holds, you can define a simple binary operator:

<lang Haskell>when :: Monad m => m () -> Bool -> m () action `when` condition = if condition then action else return () </lang>

Example usage:

Prelude> putStrLn "It's true." `when` False
Prelude> putStrLn "It's true." `when` True
It's true.
Prelude> 

---

Haskell has a feature that can be considered "inverted" syntax (although it is not one of the types listed in the description of the task): The definition of local variables to be used in a function can be placed in a where clause that comes after the function body:

<lang haskell>func a b x = (x + y) / y

 where y = a * b</lang>

This is in contrast to let expressions, where the definition of local variables comes before the scope that uses them:

<lang haskell>func a b x =

 let y = a * b in
   (x + y) / y</lang>

Icon and Unicon

Icon and Unicon can use expression conjunctions that select different sub-expression results to create this effect. <lang Icon>procedure main() raining := TRUE := 1 # there is no true/false null/non-null will do if \raining then needumbrella := TRUE # normal needumbrella := 1(TRUE, \raining) # inverted (choose sub-expression 1) end</lang>

J

J tries to minimize syntax and control structures. However, they are present.

For control structures, "traditional conditional structures" are traditional (control structures implemented using keywords such as if. are not inverted). But J offers some alternatives which are inverted (operations such as ^:) or both (operations such as * (multiplication) can be used as inverted conditional structures or as traditional conditional structures, depending on whether you place the boolean test on the left or the right side). See Conditional_Structures/J for some examples.

Note also that simple, regular iteration without control structures is fundamental to the language (and turns data selection operations, including indexing, into conditional structures). But no special syntax is present for these cases so it can be neither traditional nor inverted.

Java

The closest Java comes to placing an action before a condition is with

do ... while(condition);

jq

jq's syntax for associating a value with a variable is "inverted": the expression for associating a value, v, with a variable, $x, is: <lang jq>v as $x</lang> Note, however, that there is limited support for the conventional "target = value" syntax in the context of JSON objects and arrays, but the semantics is purely functional.
For example, if o is {"a": 1}, then the expression: <lang jq>o["a"] = 2

1. or equivalently: o.a = 2</lang> emits another object equal to {"a": 2}.

Julia

Works with: Julia version 0.6

Can be easily implemented as a macro:

<lang julia>macro inv(expr, cond)

   cond isa Expr && cond.head == :if || throw(ArgumentError("$cond is not an if expression"))
   cond.args[2] = expr
   return cond

end

@inv println("Wow! Lucky Guess!") if true else println("Not!") end</lang>

Kotlin

Kotlin can get close to an inverted 'if' syntax by defining an infix function - 'iif' say. However, there doesn't appear to be a way to mimic inverted assignment. <lang scala>// version 1.0.6

infix fun Boolean.iif(cond: Boolean) = if (cond) this else !this

fun main(args: Array<String>) {

   val raining = true
   val needUmbrella = true iif (raining)
   println("Do I need an umbrella?  ${if(needUmbrella) "Yes" else "No"}")

}</lang>

Output:

Do I need an umbrella?  Yes

Latitude

Latitude, by default, does not support inverted conditionals, as its two primary means of conditional branching both involve the condition first.

<lang latitude>local 'raining = True. local 'needUmbrella = False.

if (raining) then {

 needUmbrella = True.

} else {}.

{ raining. } ifTrue {

 needUmbrella = True.

}.</lang>

However, such constructs can easily be added to the language.

<lang latitude>#'Method when := {

 localize.
 if ($1) then {
   this.
 } else { }.

}.

1. 'Method unless := {

 #'self when ($1 not).

}.

Example usage

{ needUmbrella = True. } when (raining). { needUmbrella = True. } unless (raining not).</lang>

Likewise, inverted assignment syntax is not supported natively, but it can be approximated in-language, using a definition similar to that of the built-in local=.

<lang latitude>global let= := { self slot ($2) = #'$1. }.

local 'a = 6. println: a. ;; 6

let 6 = 'b. println: b. ;; 6</lang>

M2000 Interpreter

There is no way to have inverted syntax for conditionals, except for using lambda functions. Three more things we can do. One to invert the way we call a module, passing statements before calling the module. The Second by using Let we make a Push and then a Read, so first evaluated the right expression and then the left. Here we change a global variable in the right expression and we change the index of array where we set the returned value from function. The third one is more complicated. We make a callback function which act as code of a module, with same scope, and use a module to check condition before we call the callback function

<lang M2000 Interpreter> expr=lambda ->{

     Print "ok"

} ifrev=lambda (dothis, cond) ->{

     if cond then call dothis()

} a=1 call ifrev(expr, a=1)

\\ on module call Module Subtract (a, b) {

     Push a-b

} Module PrintTop {

     Print Number

} Subtract 10, 3 : PrintTop \\ pushing before calling in reverse order Push 3, 10 : Subtract : PrintTop \\ Before call PrintTop any parameter send to stack \\ So this works ok PrintTop 1000 \\ on assignment Dim A(5)=1 Global n=2 Function AddOne (x) {

     n++
     =x

} \\ Execution of left expression, then right expression A(n)=AddOne(5) Print A(n-1)=5, n=3 \\ Execution of right expression, then left expression Let A(n)=AddOne(15) Print A(n)=15, n=4 \\ This statement.. Let X=1, Y=2 \\ executed like these Push 2, 1 : Read X, Y

\\ This is the CallBack way Module ExecCond {

     Read &callback(), cond
     if cond then call callback()

} x=1 \\ this aa() is a function but when we call it after transforming from Lazy$() \\ act as part of module so we see x, and alter it Function aa {

     x++

} a=1 ExecCond Lazy$(&aa()), A=1 Print x=2 </lang>

m4

We extend our language with a new macro, thenif, to invert the arguments to the builtin macro, ifelse.

<lang m4>define(`thenif', `ifelse($2, $3, `$1')')dnl dnl ifelse(eval(23 > 5), 1, 23 is greater than 5) ifelse(eval(23 > 5), 0, math is broken) thenif(23 is greater than 5, eval(23 > 5), 1) thenif(math is broken, eval(23 > 5), 0)</lang>

This example outputs these four lines. Math was not broken, so two lines are empty.

23 is greater than 5

23 is greater than 5

Mathematica/Wolfram Language

Traditional form: <lang Mathematica>a = 4 ->4

b = 5 ->5

If[1<2, Print["This was expected"] ] ->This was expected</lang>

Inversion of syntax:

Unprotect["="]; SetAttributes[Set2, HoldAll]; Set2[a_, b_] := Set[b, a]
<< Notation`; Notation[ParsedBoxWrapper[RowBox[{"x_", "=","y_"}]] 
\[DoubleLongLeftRightArrow] 
ParsedBoxWrapper[RowBox[{" ", RowBox[{"Set2", "[", RowBox[{"x_", ",", "y_"}], "]"}]}]]]

2 = c
->2

3 = d
->3

Unprotect["If"];SetAttributes[If2,HoldAll];If2[a_,b_]:=If[b,a]
Notation[If[x_,y_] \[DoubleLongLeftRightArrow]  If2[x_,y_]]

If[Print["This was expected"],
1<2
]
->This was expected

Mercury

For Mercury, order rarely matters. Just as programmers in most languages take care to order their function definitions or their method definitions for clarity and emphasis, while knowing that it's all the same to the compiler, Mercury programmers can do this also in the bodies of functions.

These two clauses are exactly the same:

<lang Mercury>:- pred progress(int::in, int::in, int::out, int::out) is det. progress(Past, Future, At, Total) :- At = Past + 1, Total = Past + Future.

progress(Past, Future, At, Total) :-

       Past + Future = Total,
       Past + 1 = At.</lang>

Order doesn't matter even when a data dependency tells you (and Mercury's compiler) what the order of evaluation must be:

<lang Mercury>:- func example(int) = string. example(N) = S :-

       from_int(N) = S0,
       pad_left(S0, '0', 3, S).

example(N) = S :-

       pad_left(S0, '0', 3, S),
       from_int(N) = S0.</lang>

Data dependencies are most obvious when state is threaded through a clause:

<lang Mercury>main(IO0, IO) :-

       io.write_string("Hello, ", IO0, IO1),
       io.write_string("world!\n", IO1, IO).

main(!IO) :-

       io.write_string("Hello, ", !IO),
       io.write_string("world!\n", !IO).</lang>

The io.write_string/2's in the first example could be written in either order and the result would be the same, as the "world!\n" can't be written until the "Hello, " provides the IO1. Order matters in the second example, however, as it uses state variables. The order is still enforced by a data dependency, so

<lang Mercury>main(!IO) :-

       io.write_string(X, !IO), io.nl(!IO),
       some_long_uninteresting_thing(X).

% this is the same: main(!IO) :-

       some_long_uninteresting_thing(X),
       io.write_string(X, !IO), io.nl(!IO).

% but this is different! main(!IO) :-

       io.nl(!IO), io.write_string(X, !IO),
       some_long_uninteresting_thing(X).</lang>

Metafont

Although there is an assignment operator, you can also define values of variables by equations, such as: <lang metafont>x=6; 7=y;</lang> Therefore it can be done both ways.

Nim

Inverted syntax in Nim can be achieved through the use of templates as operators:

<lang nim>#--

1. if statements
2. --

template `?`(expression, condition) =

 if condition:
   expression

let raining = true var needUmbrella: bool

1. Normal syntax

if raining: needUmbrella = true

1. Inverted syntax

(needUmbrella = true) ? (raining == true)

1. --
2. Assignments
3. --

template `~=`(right, left) =

 left = right

var a = 3

1. Normal syntax

a = 6

1. Inverted syntax

6 ~= a</lang>

Oforth

Oforth uses RPN so some forms a partially (or totally) inverted  :

  6 -> a : Push 6 on the stack and set the top of the stack as value of local variable a (top of the stack is consumed)
  6 := a : Push 6 on the stack and set the top of the satck as value of  attribute a (top of the stack is consumed).
  raining ifTrue: [ true ->needumbrella ]

OxygenBasic

Macros may have localised scope, so they can be safely deployed as HumptyDumpty words. <lang oxygenbasic> macro cond(a,c) {c then a}

macro store(b,a) {a=b}

sys a,c=10

if c>4 then a=4

'INVERTED SYNTAX FORMS:

cond a=40, if c>4

store 4,a

'COMBINED:

cond store(5,a), if c>4 </lang>

PARI/GP

Works with: PARI/GP version version 2.4.2 and above

GP does not include a syntax-inverted if, but that can be defined using closures. <lang parigp>fi(f, condition)=if(condition,f());

if(raining, print("Umbrella needed")) fi(->print("Umbrella needed"), raining)</lang>

PARI can also be used to implement it more directly in GP.

Perl

Perl already has that: <lang perl>if ($guess == 6) { print "Wow! Lucky Guess!"; }; # Traditional syntax print 'Wow! Lucky Guess!' if $guess == 6; # Inverted syntax (note missing braces and parens) unless ($guess == 6) { print "Sorry, your guess was wrong!"; } # Traditional syntax print 'Huh! You Guessed Wrong!' unless $guess == 6; # Inverted syntax</lang>

Inverted syntax can also be used with the ternary operator. However this may produce different results to the traditional syntax form because when inverted syntax is used, we are effectively making an assignment to a ternary expression. so in the following example code, instead of the assignment being made to variable a (as it is in the traditional syntax form), the inverted syntax form will cause assignment to be made to either b or c, depending on value of the ok variable:

<lang perl># Note that the results obtained by the inverted syntax form

1. may produce differing results from the traditional syntax form

$a = $ok ? $b : $c; # Traditional syntax ($ok ? $b : $c) = $a; # Inverted syntax</lang>

We can also emulate inverted syntax for scalar assignment by creating a function as follows:

<lang perl>sub assign { $_[1] = $_[0] } $a = $b; # Traditional syntax assign $b, $a; # Inverted syntax</lang>

Inverted list assignment is not possible because it prevents arrays from flattening.

Phix

original... the got still you've as long as ,itself compile/run to used be can This

if end
(&"test.exw"[1]cl)system    
then >2(cl)length if
(&"\n"(pgm)mung,"test.exw")write_file = {}
write_file.e include
([$]cl)get_text = pgm string
()command_line = cl sequence
function end
("\n",lines)join return    
for end (nup,rip,((([i]lines)split)reverse)join)substitute_all = [i]lines do (lines)length to 1=i for    
(("\r\n",(rip,pun,pgm)substitute_all)split)reverse=lines sequence
(pgm string)mung function
 
(true,"*",("*","",3,7,"       -<>{}@!       ")join_by)split = rip constant
(true,"*",("*","",1,7,"-,=][)(")join_by)split = nup constant
(true,"*",("*","",1,7,"-,=[]()")join_by)split = pun constant
js without
demo\rosetta\inverted_syntax.exw --

I should note that "if length(cl)>2 then" gets away by the skin of its teeth and would break were it written "if length(cl) > 2 then".
... and here is the original, which can be used to first create and then re-run to compile/run the above, in fact destroying/restoring/recreating it in the latter process.

-- demo\rosetta\inverted_syntax.exw
without js
constant pun = split(join_by("()[]=,-",7,1,"","*"),"*",true)
constant nup = split(join_by(")(][=,-",7,1,"","*"),"*",true)
constant rip = split(join_by("       <>{}@!-       ",7,3,"","*"),"*",true)

function mung(string pgm)
    sequence lines=reverse(split(substitute_all(pgm,pun,rip),"\r\n"))
    for i=1 to length(lines) do lines[i] = substitute_all(join(reverse(split(lines[i]))),rip,nup) end for
    return join(lines,"\n")
end function
sequence cl = command_line()
string pgm = get_text(cl[$])
include write_file.e
{} = write_file("test.exw",mung(pgm)&"\n")
if length(cl)>2 then
    system(cl[1]&"test.exw")
end if

PicoLisp

We define a read macro for reverted syntax <lang PicoLisp>(de rv Prg

  (append (last Prg) (head -1 Prg)) )</lang>

Test:

(de needUmbrella (Raining)
   `(rv                                # Inverted syntax
      (on *NeedUmbrella)
      (println 'Need 'an 'umbrella)
      (when Raining) ) )

(de keepUmbrella (Raining)
   `(rv                                # Inverted syntax
      (on *KeepUmbrella)
      (println 'Still 'need 'an 'umbrella)
      (while Raining) ) )

Output:

: (pp 'needUmbrella)
(de needUmbrella (Raining)
   (when Raining                       # Traditional syntax
      (on *NeedUmbrella)
      (println 'Need 'an 'umbrella) ) )

: (pp 'keepUmbrella)
(de keepUmbrella (Raining)
   (while Raining                      # Traditional syntax
      (on *KeepUmbrella)
      (println 'Still 'need 'an 'umbrella) ) )

PowerShell

The PowerShell syntax for an 'if' statement is very normal: <lang PowerShell> if ((Get-Date 5/27/2016).DayOfWeek -eq "Friday") {"Thank God it's Friday!"} </lang>

Output:

Thank God it's Friday!

The order of the condition and expression can be easily reversed (with a slight change in syntax): <lang PowerShell> function Action ([scriptblock]$Expression, [Alias("if")][bool]$Test) {

   if ($Test) {&$Expression}

}

Set-Alias -Name say -Value Action

say {"Thank God it's Friday!"} -if (Get-Date 5/27/2016).DayOfWeek -eq "Friday" </lang>

Output:

Thank God it's Friday!

Prolog

Prolog programs are made up of facts and rules. Facts are considered "true" if they are provable from the source code and "false" otherwise. The rules for proving new facts are described using "horn clauses" which are backwards "if" statements: the truth value of the second part becomes the truth value of the first part.

The facts themselves are usually expressed using "functors" involving parentheses, with the constant in front of the parentheses naming some property which applies to one or more items inside. As a result, they sometimes kind of look like backwards "is" statements.

<lang prolog>% Dracula is a vampire. % Also, you become a vampire if someone who is a vampire bites you. vampire(dracula). vampire(You) :- bites(Someone, You), vampire(Someone).

% Oh no! Dracula just bit Bob... bites(dracula, bob).</lang>

Output:

We load the source code into the interpreter and ask whether Alice and Bob are vampires...

?- vampire(alice).
false.

?- vampire(bob).
true .

Python

<lang python>x = truevalue if condition else falsevalue</lang>

<lang python>with open("file.txt") as f:

   something(f)</lang>

Qi

<lang qi> (define set-needumbrella

 Raining -> (set needumbrella true) where (= true Raining)
 Raining -> (set needumbrella false) where (= false Raining))

(define set-needumbrella

 Raining -> (if (= true Raining)
                (set needumbrella true)
                (set needumbrella false)))

Alternatives:

(define set-needumbrella

 Raining -> (set needumbrella true) where Raining
 Raining -> (set needumbrella false))

(define set-needumbrella

 Raining -> (if Raining
                (set needumbrella true)
                (set needumbrella false)))

(define set-needumbrella

 true  -> (set needumbrella true)
 false -> (set needumbrella false))

(define set-needumbrella

 A -> (set needumbrella A))

</lang>

R

This can be done with a simple function.

<lang R>do.if <- function(expr, cond) if(cond) expr</lang>

Because R evaluates function arguments lazily, "expr" is never evaluated unless "cond" evaluates to true.

<lang R>do.if(print("Wow! Lucky Guess!"), guess==6)</lang>

If you do not want to state "do.if" first, you can define an infix operator (any function whose name is bracketed in percent signs is treated as an infix operator), however custom infix operators have higher precedence than comparisons, so will usually require putting parentheses around the test.

<lang r>`%if%` <- function(expr, cond) if(cond) expr

print("Wow! Lucky Guess!") %if% (guess==6)</lang>

Racket

Normally, all syntactic forms and functions are in prefix notation. However, two .s allow infix notation in some cases.

<lang racket>

1. lang racket

(when #t (displayln "true")) ((displayln "true") . when . #t)

(define a 6) (set! a 5) (a . set! . 6) </lang>

Raku

(formerly Perl 6) Like all Perls, Perl 6 has statement modifiers: <lang perl6>if $guess == 6 { say "Wow! Lucky Guess!" } # Traditional say 'Wow! Lucky Guess!' if $guess == 6; # Inverted unless $guess == 6 { say "Huh! You Guessed Rong!" } # Traditional say 'Huh! You Guessed Rong!' unless $guess == 6; # Inverted</lang>

Perl also inverts the syntax of loops: <lang perl6>while $i { --$i } --$i while $i;

until $x > 10 { $x++ } $x++ until $x > 10;

for 1..10 { .say if $_ %% 2 } .say if $_ %% 2 for 1..10; # list comprehension</lang>

Perl 6 has a system of metaoperators that modify the characteristics of normal operators. Among these is the R metaoperator, which is able to reverse the arguments of most infix operators (including user-defined ones). So a reversed assignment is easy to write: <lang perl6>42 R= $_; say $_; # prints 42</lang>

Since, much like list operators, assignment loosens the precedence of the following expression to allow comma lists, reverse assignment of a list requires parens where the normal assignment would not: <lang perl6>my @a = 1,2,3; (1,2,3) R= my @a;</lang> However, generally in that case you'd use a feed operator anyway, which is like an object pipe, but unlike Unix pipes works in either direction: <lang perl6>my @a <== 1,2,3; 1,2,3 ==> my @a;</lang> We think this is much more readable than a reversed assignment.

One other interesting inversion is the ability to put the conditional of a repeat loop at either end, with identical test-after semantics: <lang perl6>repeat {

   $_ = prompt "Gimme a number: ";

} until /^\d+$/;

repeat until /^\d+$/ {

   $_ = prompt "Gimme a number: ";

}</lang> This might seem relatively useless, but it allows a variable to be declared in the conditional that isn't actually set until the loop body: <lang perl6>repeat until my $answer ~~ 42 {

   $answer = prompt "Gimme an answer: ";

}</lang> This would require a prior declaration (and two extra semicolons, horrors) if written in the non-inverted form with the conditional at the bottom: <lang perl6>my $answer; repeat {

   $answer = prompt "Gimme an answer: ";

} until $answer ~~ 42;</lang> You can't just put the my on the $answer in the block because the conditional is outside the scope of the block, and would not see the declaration.

REXX

The closest thing that the REXX language has as far as inverted syntax would be the use of the special case of the   signal   instruction:

        SIGNAL   {ON|OFF}   someCondition   {name}

<lang rexx>/*REXX program demonstrates a use of a special case of inverted syntax (via SIGNAL ON).*/ signal on syntax a=7 zz=444 / (7-a) return zz /*──────────────────────────────────────────────────────────────────────────────────────*/ syntax: say '***error*** program is attempting to do division by zero,'

        say  'the REXX statement number is: '  sigL  " and the REXX source is:"
        say  sourceLine(sigL)
        exit 13</lang>

output

***error***  program is attempting to do division by zero,
the REXX statement number is:  4  and the REXX source is:
zz=444 / (7-a)

Ruby

Ruby takes, from Perl, the idea of a statement modifier. This looks like statement if condition and appends a condition to some statement. This example shows how to invert if, unless, while and until. These always check the condition before running the statement.

<lang ruby># Raise ArgumentError if n is negative. if n < 0 then raise ArgumentError, "negative n" end raise ArgumentError, "negative n" if n < 0

1. Exit 1 unless we can call Process.fork.

unless Process.respond_to? :fork then exit 1 end exit 1 unless Process.respond_to? :fork

1. Empty an array, printing each element.

while ary.length > 0 do puts ary.shift end puts ary.shift while ary.length > 0

1. Another way to empty an array, printing each element.

until ary.empty? do puts ary.shift end puts ary.shift until ary.empty?</lang>

One can also modify a compound statement, as in (warn "cannot fork"; exit 1) unless Process.respond_to? :fork.

Beware: The forms begin ... end while ... and begin ... end until ... have a different meaning to Ruby. These forms check the condition after each iteration, so they run the loop at least once. Loops/Do-while#Ruby has more information.

Scala

<lang scala>object Main extends App {

 val raining = true
 val needUmbrella = raining
 println(s"Do I need an umbrella?  ${if (needUmbrella) "Yes" else "No"}")

}</lang>

Sidef

<lang ruby># Inverted syntax with assignment var raining = true; [false]»(\var needumbrella);

1. Inverted syntax with conditional expressions

if (raining==true) {needumbrella=true}; {needumbrella=true} -> if (raining==true); (needumbrella=true) if (raining==true);</lang>

Swift

Inverted syntax can be done with custom operators <lang Swift>infix operator ~= {} infix operator ! {}

func ~=(lhs:Int, inout rhs:Int) {

   rhs = lhs

}

func !(lhs:(() -> Void), rhs:Bool) {

   if (rhs) {
       lhs()
   }

}

// Traditional assignment var a = 0

// Inverted using a custom operator 20 ~= a

let raining = true let tornado = true var needUmbrella = false var stayInside = false

// Traditional conditional expression if raining {needUmbrella = true}

// Inverted using a custom operator _ = {stayInside = true} ! tornado</lang>

Tcl

Copied verbatim from do.tcl, a part of tcllib's control package. <lang tcl>

1. do.tcl --
3. Tcl implementation of a "do ... while|until" loop.
5. Originally written for the "Texas Tcl Shootout" programming contest
6. at the 2000 Tcl Conference in Austin/Texas.
8. Copyright (c) 2001 by Reinhard Max <Reinhard.Max@gmx.de>
10. See the file "license.terms" for information on usage and redistribution
11. of this file, and for a DISCLAIMER OF ALL WARRANTIES.
13. RCS: @(#) $Id: do.tcl,v 1.6 2004/01/15 06:36:12 andreas_kupries Exp $

namespace eval ::control {

   proc do {body args} {

# # Implements a "do body while|until test" loop # # It is almost as fast as builtin "while" command for loops with # more than just a few iterations. #

set len [llength $args] if {$len !=2 && $len != 0} { set proc [namespace current]::[lindex [info level 0] 0] return -code error "wrong # args: should be \"$proc body\" or \"$proc body \[until|while\] test\"" } set test 0 foreach {whileOrUntil test} $args { switch -exact -- $whileOrUntil { "while" {} "until" { set test !($test) } default { return -code error \ "bad option \"$whileOrUntil\": must be until, or while" } } break }

# the first invocation of the body set code [catch { uplevel 1 $body } result]

# decide what to do upon the return code: # # 0 - the body executed successfully # 1 - the body raised an error # 2 - the body invoked [return] # 3 - the body invoked [break] # 4 - the body invoked [continue] # everything else - return and pass on the results # switch -exact -- $code { 0 {} 1 { return -errorinfo [ErrorInfoAsCaller uplevel do] \ -errorcode $::errorCode -code error $result } 3 { # FRINK: nocheck return } 4 {} default { return -code $code $result } } # the rest of the loop set code [catch {uplevel 1 [list while $test $body]} result] if {$code == 1} { return -errorinfo [ErrorInfoAsCaller while do] \ -errorcode $::errorCode -code error $result } return -code $code $result

   }

}

1. usage:

package require control control::do {set i 0; puts "hello world"; incr i} until {$i > 0} </lang>

A more radical and probably ill-advised approach is to use the above and modify the default tcl unknown procedure along these lines:

<lang tcl> rename unknown __unknown proc unknown {args} {

  if {3 == [llength $args]} {
     package require control
     return [control::do {*}$args]
  } else {
     return [__unknown {*}$args]
  }

}

1. usage

% {set i 0; puts "hello world"; incr i} until {$i > 0} hello world </lang>

TI-83 BASIC

Assignment uses inverted syntax. <lang ti83b>536→N</lang>

Wortel

The ~ operator reverse the arguments of the next operator. <lang wortel>; a = expr

a expr

expr = a

~:expr a

if cond expr

@if cond expr

if expr cond

~@if expr cond</lang>

Wren

Follows the lines of the Go example which is probably the nearest Wren can get to inverted syntax also.

Again, simulating inverted syntax with assignment is not possible. <lang ecmascript>class IBool {

   construct new(b) {
       if (!(b is Bool)) Fiber.abort("B must be a boolean")
       _b = b
   }

   iff(cond) { cond ? _b : !_b }

}

var itrue = IBool.new(true)

var needUmbrella var raining = true

// normal syntax if (raining) needUmbrella = true System.print("Is it raining? %(raining). Do I need an umbrella? %(needUmbrella)")

// inverted syntax raining = false needUmbrella = itrue.iff(raining) System.print("Is it raining? %(raining). Do I need an umbrella? %(needUmbrella)")</lang>

Output:

Is it raining? true. Do I need an umbrella? true
Is it raining? false. Do I need an umbrella? false

Z80 Assembly

Syntax on the Z80 is very rigid; macros notwithstanding there is very little support for inverted syntax. However, since the CPU is little-endian, you can store 16-bit data as a word or 2 bytes: <lang z80>byte &EF,&BE word &BEEF</lang>

Both of the above are equivalent.

zkl

zkl is a OO language so the preferred style is object.method().method()... When a computation needs to be done first, the compose op (colon) can be used maintain the "noun/verb/verb" flow: f() : ... It is also useful to "unwind" computations so they are easier to read but not require any temp vars. <lang zkl>if (raining==True) needumbrella:=True; (raining==True) : if (_) needumbrella:=True;</lang> <lang zkl>a := 6 6 : a:=_</lang> <lang zkl>key.sort(fcn(kv,kv2){kv[0] < kv2[0]}) : listUnzip(_) : D.SD((_).xplode()) : return(_);</lang>