Unicode strings: Difference between revisions
revert task desc |
{{header|80386 Assembly}} |
||
Line 13: | Line 13: | ||
* [[Unicode variable names]] |
* [[Unicode variable names]] |
||
* [[Terminal control/Display an extended character]] |
* [[Terminal control/Display an extended character]] |
||
=={{header|80386 Assembly}}== |
|||
* How well prepared is the programming language for Unicode? - Well prepared. Assembly language can do anything the computer can do. |
|||
* How easy is it to present Unicode strings in source code? - Easy, they are in hexadecimal. |
|||
* Can Unicode literals be written directly - Depends on the compiler. MASM does not allow this, but we could create a translator. |
|||
* or be part of identifiers/keywords/etc? - Depends on compiler. Intel notation does not use Unicode identifiers or mnemonics. Assembly language converts to numeric machine code, so everything is represented as mnemonics. You can use your own mnemonics, but you need to be able to compile them. One way to do this is to use a wrapper (which you would create) that converts your Unicode mnemonic notation to the notation that the compiler is expecting. |
|||
* How well can the language communicate with the rest of the world? - Difficult. This is a low level language, so all communication can be done, but you have to set up data structures, and produce many lines of code for just basic tasks. |
|||
* Is it good at input/output with Unicode? - Yes and No. The Unicode bit is easy, but for input/output, we have to set up data structures and produce many lines of code, or link to code libraries. |
|||
* Is it convenient to manipulate Unicode strings in the language? - No. String manipulation requires lots of code. We can link to code libraries though, but it is not as straightforward, as it would be in a higher level language. |
|||
* How broad/deep does the language support Unicode? We can do anything in assembly language, so support is 100%, but nothing is convenient with respect to Unicode. Strings are just a series of bytes, treatment of a series of bytes as a string is down to the compilerm if it provides string support as an extension. You need to be prepared to define data structures containing the values that you want. |
|||
What encodings (e.g. UTF-8, UTF-16, etc) can be used? All encodings are supported, but again, nothing is convenient with respect to encodings, although hexadecimal notation is good to use in assembly language. |
|||
* Normalization? - This is supported. All characters are in hexadecimal. Be prepared to write lots of code. |
|||
* Canonization? - Good. We create our own data structures, so you can canonize however you like. However, be prepared to write lots of code. |
|||
=={{header|C}}== |
=={{header|C}}== |
Revision as of 09:20, 25 July 2011
As the world gets smaller each day, internationalization becomes more and more important. For handling multiple languages, Unicode is your best friend. It is a very capable tool, but also quite complex compared to older single- and double-byte character encodings. How well prepared is your programming language for Unicode? Discuss and demonstrate its unicode awareness and capabilities. Some suggested topics:
- How easy is it to present Unicode strings in source code? Can Unicode literals be written directly, or be part of identifiers/keywords/etc?
- How well can the language communicate with the rest of the world? Is it good at input/output with Unicode?
- Is it convenient to manipulate Unicode strings in the language?
- How broad/deep does the language support Unicode? What encodings (e.g. UTF-8, UTF-16, etc) can be used? Normalization? Canonization?
Note This task is a bit unusual in that it encourages general discussion rather than clever coding.
See also:
80386 Assembly
- How well prepared is the programming language for Unicode? - Well prepared. Assembly language can do anything the computer can do.
- How easy is it to present Unicode strings in source code? - Easy, they are in hexadecimal.
- Can Unicode literals be written directly - Depends on the compiler. MASM does not allow this, but we could create a translator.
- or be part of identifiers/keywords/etc? - Depends on compiler. Intel notation does not use Unicode identifiers or mnemonics. Assembly language converts to numeric machine code, so everything is represented as mnemonics. You can use your own mnemonics, but you need to be able to compile them. One way to do this is to use a wrapper (which you would create) that converts your Unicode mnemonic notation to the notation that the compiler is expecting.
- How well can the language communicate with the rest of the world? - Difficult. This is a low level language, so all communication can be done, but you have to set up data structures, and produce many lines of code for just basic tasks.
- Is it good at input/output with Unicode? - Yes and No. The Unicode bit is easy, but for input/output, we have to set up data structures and produce many lines of code, or link to code libraries.
- Is it convenient to manipulate Unicode strings in the language? - No. String manipulation requires lots of code. We can link to code libraries though, but it is not as straightforward, as it would be in a higher level language.
- How broad/deep does the language support Unicode? We can do anything in assembly language, so support is 100%, but nothing is convenient with respect to Unicode. Strings are just a series of bytes, treatment of a series of bytes as a string is down to the compilerm if it provides string support as an extension. You need to be prepared to define data structures containing the values that you want.
What encodings (e.g. UTF-8, UTF-16, etc) can be used? All encodings are supported, but again, nothing is convenient with respect to encodings, although hexadecimal notation is good to use in assembly language.
- Normalization? - This is supported. All characters are in hexadecimal. Be prepared to write lots of code.
- Canonization? - Good. We create our own data structures, so you can canonize however you like. However, be prepared to write lots of code.
C
C is not the most unicode friendly language, to put it mildly. Generally using unicode in C requires dealing with locales, manage data types carefully, and checking various aspects of your compiler. Directly embedding unicode strings in your C source might be a bad idea, too; it's safer to use their hex values. Here's a short example of doing the simplest string handling: print it.<lang C>#include <stdio.h>
- include <stdlib.h>
- include <locale.h>
/* wchar_t is the standard type for wide chars; what it is internally
* depends on the compiler. */
wchar_t poker[] = L"♥♦♣♠"; wchar_t four_two[] = L"\x56db\x5341\x4e8c";
int main() { /* Set the locale to alert C's multibyte output routines */ if (!setlocale(LC_CTYPE, "")) { fprintf(stderr, "Locale failure, check your env vars\n"); return 1; }
- ifdef __STDC_ISO_10646__
/* C99 compilers should understand these */ printf("%lc\n", 0x2708); /* ✈ */ printf("%ls\n", poker); /* ♥♦♣♠ */ printf("%ls\n", four_two); /* 四十二 */
- else
/* oh well */ printf("airplane\n"); printf("club diamond club spade\n"); printf("for ty two\n");
- endif
return 0; }</lang>
Go
Go source code is specified to be UTF-8 encoded. Identifiers like variables and fields names can contain non-ASCII characters. String literals containing non-ASCII characters are naturally represented as UTF-8. In addition, certain built-in features interpret strings as UTF-8. For example, <lang go> for i, rune := range "voilà" {
fmt.Println(i, rune) }</lang>
outputs
0 118 1 111 2 105 3 108 4 224
224 being the Unicode code point for the à character.
In contrast, <lang go> w := "voilà"
for i := 0; i < len(w); i++ { fmt.Println(i, w[i]) }
</lang> outputs
0 118 1 111 2 105 3 108 4 195 5 160
bytes 4 and 5 showing the UTF-8 encoding of à. The expression w[i] in this case has the type of byte rather than int.
The built-in string data type is not limited to UTF-8 and is simply a byte string that can hold arbitrary data and be interpreted as needed. In general, I/O is done on byte strings without any annotation of the encoding used. Proper interpretation of the byte strings must be understood, specified, or negotiated separately. In particular, there is no built-in or automatic handling of byte order marks.
The heavily used standard packages bytes and strings both have functions for working with strings as both as UTF-8 and as encoding-unspecified bytes. The standard packages utf8, utf16, and unicode have additional functions.
Currently there is no standard support for normalization.
J
Unicode characters can be represented directly in J strings:
<lang j> '♥♦♣♠' ♥♦♣♠</lang>
By default, they are represented as utf-8:
<lang j> #'♥♦♣♠' 12</lang>
However, they can be represented as utf-16 instead:
<lang j> 7 u:'♥♦♣♠' ♥♦♣♠
#7 u:'♥♦♣♠'
4</lang>
These forms are not treated as equivalent:
<lang j> '♥♦♣♠' -: 7 u:'♥♦♣♠' 0</lang>
unless the character literals themselves are equivalent:
<lang j> 'abcd'-:7 u:'abcd' 1</lang>
Output uses characters in whatever format they happen to be in. Character input assumes 8 bit characters but places no additional interpretation on them.
See also: http://www.jsoftware.com/help/dictionary/duco.htm
Unicode characters are not legal tokens or names, within current versions J.
Locomotive Basic
The Amstrad CPC464 does not have native Unicode support. It is possible to represent Unicode by using ASCII based hexadecimal number sequences, or by using a form of escape sequence encoding, such as \uXXXX. However, there is only 48k of memory available and 510k would be needed to store the Unicode characters for display, so Unicode is not really viable on this platform.
- How well prepared is the programming language for Unicode? - Not good. There are no Unicode symbols in the ROM.
- How easy is it to present Unicode strings in source code? - Easy, they are in hexadecimal.
- Can Unicode literals be written directly - No
- or be part of identifiers/keywords/etc? - No
- How well can the language communicate with the rest of the world? - Not good. There is no TCP/IP stack, and the computer does not have an Ethernet port.
- Is it good at input/output with Unicode? - Not good. There are no Unicode symbols in ROM, or on the keyboard.
- Is it convenient to manipulate Unicode strings in the language? - Moderate. The language is not designed for Unicode, so has no inbuilt Unicode functions. However, it is possible to write manipulation routines, and the language is good at arithmetic, so no problem.
- How broad/deep does the language support Unicode? What encodings (e.g. UTF-8, UTF-16, etc) can be used? There is no inbuilt support for Unicode, but all encodings can be represented through hexadecimal strings.
- Normalization? - This is supported. All strings are in hexadecimal
- Canonization? - Poor. The Unicode characters are not in ROM, and there is not enough RAM to achieve this.
Perl
In Perl, "Unicode" means "UTF-8". If you want to include utf8 characters in your source file, unless you have set PERL_UNICODE
environment correctly, you should do<lang Perl>use utf8;</lang> or you risk the parser treating the file as raw bytes.
Inside the script, utf8 characters can be used both as identifiers and literal strings, and built-in string functions will respect it:<lang Perl>$四十二 = "voilà"; print "$四十二"; # voilà print uc($四十二); # VOILÀ</lang> or you can specify unicode characters by name or ordinal:<lang Perl>use charnames qw(greek); $x = "\N{sigma} \U\N{sigma}"; $y = "\x{2708}"; print scalar reverse("$x $y"); # ✈ Σ σ</lang>
Regular expressions also have support for unicode based on properties, for example, finding characters that's normally written from right to left:<lang Perl>print "Say עִבְרִית" =~ /(\p{BidiClass:R})/g; # עברית</lang>
When it comes to IO, one should specify whether a file is to be opened in utf8 or raw byte mode:<lang Perl>open IN, "<:utf8", "file_utf";
open OUT, ">:raw", "file_byte";</lang>
The default of IO behavior can also be set in PERL_UNICODE
.
However, when your program interacts with the environment, you may still run into tricky spots if you have imcompatible locale settings or your OS is not using unicode; that's not what Perl has control over, unfortunately.
Perl 6
Perl 6 programs and strings are all in Unicode, specced (but not yet entirely implemented) to operate at a grapheme abstraction level, which is agnostic to underlying encodings or normalizations. (These are generally handled at program boundaries.) Opened files default to UTF-8 encoding. All Unicode character properties are in play, so any appropriate characters may be used as parts of identifiers, whitespace, or user-defined operators. For instance:
<lang perl6>sub prefix:<∛> ($𝕏) { $𝕏 ** (1/3) } say ∛27; # prints 3</lang>
Non-Unicode strings are represented as Buf types rather than Str types, and Unicode operations may not be applied to Buf types without some kind of explicit conversion. Only ASCIIish operations are allowed on buffers.
As things develop, Perl 6 intends to support Unicode even better than Perl 5, which already does a great job in recent versions of accessing nearly all Unicode 6.0 functionality. Perl 6 improves on Perl 5 primarily by offering explicitly typed strings that always know which operations are sensical and which are not.
PicoLisp
PicoLisp can directly handle _only_ Unicode (UTF-8) strings. So the problem is rather how to handle non-Unicode strings: They must be pre- or post-processed by external tools, typically with pipes during I/O. For example, to read a line from a file in 8859 encoding: <lang PicoLisp>(in '(iconv "-f" "ISO-8859-15" "file.txt") (line))</lang>
Tcl
All characters in Tcl are always Unicode characters, with ordinary string operations (as listed elsewhere on Rosetta Code) always performed on Unicode. Input and output characters are translated from and to the system's native encoding automatically (with this being able to be overridden on a per file-handle basis via fconfigure -encoding
). Source files can be written in encodings other than the native encoding — from Tcl 8.5 onwards, the encoding to use for a file can be controlled by the -encoding
option to tclsh, wish and source
— though it is usually recommended that programmers maximize their portability by writing in the ASCII subset and using the \uXXXX
escape sequence for all other characters. Tcl does not handle byte-order marks by default, because that requires deeper understanding of the application level (and sometimes the encoding information is available in metadata anyway, such as when handling HTTP connections).
The way in which characters are encoded in memory is not defined by the Tcl language (the implementation uses byte arrays, UTF-16 arrays and UCS-2 strings as appropriate) and the only characters with any restriction on use as command or variable names are the ASCII parenthesis and colon characters. However, the $var
shorthand syntax is much more restricted (to ASCII alphanumeric plus underline only); other cases have to use the more verbose form: [set funny–var–name]
.
UNIX Shell
The Bourne shell does not have any inbuilt Unicode functionality. However, Unicode can be represented as ASCII based hexadecimal number sequences, or by using form of escape sequence encoding, such as \uXXXX. The shell will produce its output in ASCII, but can call other programs to produce the Unicode output. The shell does not have any inbuilt string manipulation utilities, so uses external tools such as cut, expr, grep, sed and awk. These would typically manipulate the hexadecimal sequences to provide string manipulation, or dedicated Unicode based tools could be used.
- How well prepared is the programming language for Unicode? - Fine. All Unicode strings can be represented as hexadecimal sequences.
- How easy is it to present Unicode strings in source code? - Easy, they are in hexadecimal.
- Can Unicode literals be written directly - No
- or be part of identifiers/keywords/etc? - No
- How well can the language communicate with the rest of the world? - Extremely well. The shell makes use of all of the tools that a Unix box has to offer.
- Is it good at input/output with Unicode? - This language is weak on input/output anyway, so its Unicode input/output is also weak. However, the shell makes use of all installed tools, so this is not a problem in real terms.
- Is it convenient to manipulate Unicode strings in the language? - Not really, the shell is not good at string manipulation. Howver, it makes good use of external programs, so Unicode string manipulation should not be a problem.
- How broad/deep does the language support Unicode?There is no inbuilt support for Unicode
- What encodings (e.g. UTF-8, UTF-16, etc) can be used? The shell can support all encodings through hexadecimal strings.
- Normalization? - This is supported. All strings are in hexadecimal
- Canonization? - Poor. The shell is not good at making canonized lists of symbols.
ZX Spectrum Basic
The ZX Spectrum does not have native Unicode support. However, it does support user defined graphics, which makes it is possible to create custom characters in the UDG area. It is possible to represent Unicode by using ASCII based hexadecimal number sequences, or by using a form of escape sequence encoding, such as \uXXXX. However, there is only 48k of memory available on a traditional rubber key ZX Spectrum, (or 128k on some of the plus versions), and 510k would be needed to store the Unicode characters for display, so Unicode is not really viable on this platform.
- How well prepared is the programming language for Unicode? - Not good. There are no Unicode symbols in the ROM.
- How easy is it to present Unicode strings in source code? - Easy, they are in hexadecimal.
- Can Unicode literals be written directly - No
- or be part of identifiers/keywords/etc? - No
- How well can the language communicate with the rest of the world? - Not good. There is no TCP/IP stack, and the computer does not have an Ethernet port.
- Is it good at input/output with Unicode? - Not good. There are no Unicode symbols in ROM, or on the keyboard.
- Is it convenient to manipulate Unicode strings in the language? - Moderate. The language is not designed for Unicode, so has no inbuilt Unicode functions. However, it is possible to write manipulation routines, and the language is good at arithmetic, so no problem.
- How broad/deep does the language support Unicode? What encodings (e.g. UTF-8, UTF-16, etc) can be used? There is no inbuilt support for Unicode, but all encodings can be represented through hexadecimal strings.
- Normalization? - This is supported. All strings are in hexadecimal
- Canonization? - Poor. The Unicode characters are not in ROM, and there is not enough RAM to achieve this.