Sequence: smallest number greater than previous term with exactly n divisors: Difference between revisions
Sequence: smallest number greater than previous term with exactly n divisors (view source)
Revision as of 11:38, 4 February 2024
, 4 months ago→{{header|Wren}}: Minor tidy
No edit summary |
m (→{{header|Wren}}: Minor tidy) |
||
(118 intermediate revisions by 39 users not shown) | |||
Line 1:
<!-- This Rosetta Code task previously was named Anti-prime Plus
before it was renamed and split into three different tasks. !-->
{{task}}
Calculate the sequence where each term <strong>a<sub>n</sub></strong> is the '''smallest natural number''' greater than the previous term, that has exactly '''n''' divisors.
;Task
Show here, on this page, at least the first '''15''' terms of the sequence.
;See also
:* [[oeis:A069654|OEIS:A069654]]
;Related tasks
:* [[Sequence: smallest number with exactly n divisors]]
:* [[Sequence: nth number with exactly n divisors]]
<br><br>
=={{header|11l}}==
{{trans|Python}}
<syntaxhighlight lang="11l">F divisors(n)
V divs = [1]
L(ii) 2 .< Int(n ^ 0.5) + 3
I n % ii == 0
divs.append(ii)
divs.append(Int(n / ii))
divs.append(n)
R Array(Set(divs))
F sequence(max_n)
V previous = 0
V n = 0
[Int] r
L
n++
V ii = previous
I n > max_n
L.break
L
ii++
I divisors(ii).len == n
r.append(ii)
previous = ii
L.break
R r
L(item) sequence(15)
print(item)</syntaxhighlight>
{{out}}
<pre>
1
2
4
6
16
18
64
66
100
112
1024
1035
4096
4288
4624
</pre>
=={{header|Action!}}==
Calculations on a real Atari 8-bit computer take quite long time. It is recommended to use an emulator capable with increasing speed of Atari CPU.
<syntaxhighlight lang="action!">CARD FUNC CountDivisors(CARD a)
CARD i,count
i=1 count=0
WHILE i*i<=a
DO
IF a MOD i=0 THEN
IF i=a/i THEN
count==+1
ELSE
count==+2
FI
FI
i==+1
OD
RETURN (count)
PROC Main()
CARD a
BYTE i
a=1
FOR i=1 TO 15
DO
WHILE CountDivisors(a)#i
DO
a==+1
OD
IF i>1 THEN
Print(", ")
FI
PrintC(a)
OD
RETURN</syntaxhighlight>
{{out}}
[https://gitlab.com/amarok8bit/action-rosetta-code/-/raw/master/images/Sequence_smallest_number_greater_than_previous_term_with_exactly_n_divisors.png Screenshot from Atari 8-bit computer]
<pre>
1, 2, 4, 6, 16, 18, 64, 66, 100, 112, 1024, 1035, 4096, 4288, 4624
</pre>
=={{header|Ada}}==
{{trans|Go}}
<syntaxhighlight lang="ada">with Ada.Text_IO;
procedure Show_Sequence is
function Count_Divisors (N : in Natural) return Natural is
Count : Natural := 0;
I : Natural;
begin
I := 1;
while I**2 <= N loop
if N mod I = 0 then
if I = N / I then
Count := Count + 1;
else
Count := Count + 2;
end if;
end if;
I := I + 1;
end loop;
return Count;
end Count_Divisors;
procedure Show (Max : in Natural) is
use Ada.Text_IO;
N : Natural := 1;
Begin
Put_Line ("The first" & Max'Image & "terms of the sequence are:");
for Divisors in 1 .. Max loop
while Count_Divisors (N) /= Divisors loop
N := N + 1;
end loop;
Put (N'Image);
end loop;
New_Line;
end Show;
begin
Show (15);
end Show_Sequence;</syntaxhighlight>
{{out}}
<pre>The first 15terms of the sequence are:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624</pre>
=={{header|ALGOL 68}}==
{{trans|Go}} with a small optimisation.
<syntaxhighlight lang="algol68">BEGIN
PROC count divisors = ( INT n )INT:
BEGIN
INT i2, count := 0;
FOR i WHILE ( i2 := i * i ) < n DO
IF n MOD i = 0 THEN count +:= 2 FI
OD;
IF i2 = n THEN count + 1 ELSE count FI
END # count divisors # ;
INT max = 15;
print( ( "The first ", whole( max, 0 ), " terms of the sequence are:" ) );
INT next := 1;
FOR i WHILE next <= max DO
IF next = count divisors( i ) THEN
print( ( " ", whole( i, 0 ) ) );
next +:= 1
FI
OD
END</syntaxhighlight>
{{out}}
<pre>
The first 15 terms of the sequence are: 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|ALGOL W}}==
{{Trans|Go}}...via Algol 68 and with a small optimisation.
<syntaxhighlight lang="pascal">begin
integer max, next, i;
integer procedure countDivisors ( Integer value n ) ;
begin
integer count, i, i2;
count := 0;
i := 1;
while begin i2 := i * i;
i2 < n
end do begin
if n rem i = 0 then count := count + 2;
i := i + 1
end;
if i2 = n then count + 1 else count
end countDivisors ;
max := 15;
write( i_w := 1, s_w := 0, "The first ", max, " terms of the sequence are: " );
i := next := 1;
while next <= max do begin
if next = countDivisors( i ) then begin
writeon( i_w := 1, s_w := 0, " ", i );
next := next + 1
end;
i := i + 1
end;
write()
end.</syntaxhighlight>
{{out}}
<pre>
The first 15 terms of the sequence are: 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|Arturo}}==
<syntaxhighlight lang="rebol">i: new 0
next: new 1
MAX: 15
while [next =< MAX][
if next = size factors i [
prints ~"|i| "
inc 'next
]
inc 'i
]
print ""</syntaxhighlight>
{{out}}
<pre>1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624</pre>
=={{header|AutoHotkey}}==
{{trans|Go}}
<syntaxhighlight lang="autohotkey">MAX := 15
next := 1, i := 1
while (next <= MAX)
if (next = countDivisors(A_Index))
Res.= A_Index ", ", next++
MsgBox % "The first " MAX " terms of the sequence are:`n" Trim(res, ", ")
return
countDivisors(n){
while (A_Index**2 <= n)
if !Mod(n, A_Index)
count += (A_Index = n/A_Index) ? 1 : 2
return count
}</syntaxhighlight>
Outputs:<pre>The first 15 terms of the sequence are:
1, 2, 4, 6, 16, 18, 64, 66, 100, 112, 1024, 1035, 4096, 4288, 4624</pre>
=={{header|AWK}}==
<syntaxhighlight lang="awk">
# syntax: GAWK -f SEQUENCE_SMALLEST_NUMBER_GREATER_THAN_PREVIOUS_TERM_WITH_EXACTLY_N_DIVISORS.AWK
# converted from Kotlin
BEGIN {
limit = 15
printf("first %d terms:",limit)
n = 1
while (n <= limit) {
if (n == count_divisors(++i)) {
printf(" %d",i)
n++
}
}
printf("\n")
exit(0)
}
function count_divisors(n, count,i) {
for (i=1; i*i<=n; i++) {
if (n % i == 0) {
count += (i == n / i) ? 1 : 2
}
}
return(count)
}
</syntaxhighlight>
{{out}}
<pre>
first 15 terms: 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|BASIC}}==
==={{header|BASIC256}}===
{{trans|FreeBASIC}}
<syntaxhighlight lang="vbnet">UPTO = 15
i = 2
nfound = 1
print 1; " "; #special case
while nfound < UPTO
n = divisors(i)
if n = nfound + 1 then
nfound += 1
print i; " ";
end if
i += 1
end while
end
function divisors(n)
#find the number of divisors of an integer
r = 2
for i = 2 to n\2
if n mod i = 0 then r += 1
next i
return r
end function</syntaxhighlight>
==={{header|Gambas}}===
{{trans|FreeBASIC}}
<syntaxhighlight lang="vbnet">Public Sub Main()
Dim UPTO As Integer = 15, i As Integer = 2
Dim n As Integer, nfound As Integer = 1
Print 1; " "; 'special case
While nfound < UPTO
n = divisors(i)
If n = nfound + 1 Then
nfound += 1
Print i; " ";
End If
i += 1
Wend
End Sub
Function divisors(n As Integer) As Integer
'find the number of divisors of an integer
Dim r As Integer = 2, i As Integer
For i = 2 To n \ 2
If n Mod i = 0 Then r += 1
Next
Return r
End Function</syntaxhighlight>
==={{header|PureBasic}}===
{{trans|FreeBASIC}}
<syntaxhighlight lang="purebasic">Procedure.i divisors(n)
;find the number of divisors of an integer
Define.i r, i
r = 2
For i = 2 To n/2
If n % i = 0: r + 1
EndIf
Next i
ProcedureReturn r
EndProcedure
OpenConsole()
Define.i UPTO, i, n, found
UPTO = 15
i = 2
nfound = 1
Print("1 ") ;special case
While nfound < UPTO
n = divisors(i)
If n = nfound + 1:
nfound + 1
Print(Str(i) + " ")
EndIf
i + 1
Wend
PrintN(#CRLF$ + "Press ENTER to exit"): Input()
CloseConsole()</syntaxhighlight>
==={{header|QBasic}}===
{{trans|FreeBASIC}}
{{works with|QBasic|1.1}}
{{works with|QuickBasic|4.5}}
<syntaxhighlight lang="qbasic">FUNCTION divisors (n)
'find the number of divisors of an integer
r = 2
FOR i = 2 TO n \ 2
IF n MOD i = 0 THEN r = r + 1
NEXT i
divisors = r
END FUNCTION
UPTO = 15
i = 2
nfound = 1
PRINT 1; 'special case
WHILE nfound < UPTO
n = divisors(i)
IF n = nfound + 1 THEN
nfound = nfound + 1
PRINT i;
END IF
i = i + 1
WEND</syntaxhighlight>
==={{header|Run BASIC}}===
{{trans|FreeBASIC}}
{{works with|Just BASIC}}
{{works with|Liberty BASIC}}
<syntaxhighlight lang="vb">UPTO = 15
i = 2
nfound = 1
print 1; " "; 'special case
while nfound < UPTO
n = divisors(i)
if n = nfound + 1 then
nfound = nfound + 1
print i; " ";
end if
i = i + 1
wend
print
end
function divisors(n)
'find the number of divisors of an integer
r = 2
for i = 2 to n / 2
if n mod i = 0 then r = r + 1
next i
divisors = r
end function</syntaxhighlight>
==={{header|XBasic}}===
{{trans|FreeBASIC}}
{{works with|Windows XBasic}}
<syntaxhighlight lang="qbasic">PROGRAM "program name"
VERSION "0.0000"
DECLARE FUNCTION Entry ()
DECLARE FUNCTION divisors (n)
FUNCTION Entry ()
UPTO = 15
i = 2
nfound = 1
PRINT 1; 'special case
DO WHILE nfound < UPTO
n = divisors(i)
IF n = nfound + 1 THEN
INC nfound
PRINT i;
END IF
INC i
LOOP
END FUNCTION
FUNCTION divisors (n)
'find the number of divisors of an integer
r = 2
FOR i = 2 TO n / 2
IF n MOD i = 0 THEN INC r
NEXT i
RETURN r
END FUNCTION
END PROGRAM</syntaxhighlight>
==={{header|Yabasic}}===
{{trans|FreeBASIC}}
<syntaxhighlight lang="vbnet">UPTO = 15
i = 2
nfound = 1
print 1, " "; //special case
while nfound < UPTO
n = divisors(i)
if n = nfound + 1 then
nfound = nfound + 1
print i, " ";
fi
i = i + 1
end while
print
end
sub divisors(n)
local r, i
//find the number of divisors of an integer
r = 2
for i = 2 to n / 2
if mod(n, i) = 0 r = r + 1
next i
return r
end sub</syntaxhighlight>
=={{header|C}}==
{{trans|Go}}
<syntaxhighlight lang="c">#include <stdio.h>
#define MAX 15
int count_divisors(int n) {
int i, count = 0;
for (i = 1; i * i <= n; ++i) {
if (!(n % i)) {
if (i == n / i)
count++;
else
count += 2;
}
}
return count;
}
int main() {
int i, next = 1;
printf("The first %d terms of the sequence are:\n", MAX);
for (i = 1; next <= MAX; ++i) {
if (next == count_divisors(i)) {
printf("%d ", i);
next++;
}
}
printf("\n");
return 0;
}</syntaxhighlight>
{{out}}
<pre>
The first 15 terms of the sequence are:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|C++}}==
{{trans|C}}
<syntaxhighlight lang="cpp">#include <iostream>
#define MAX 15
using namespace std;
int count_divisors(int n) {
int count = 0;
for (int i = 1; i * i <= n; ++i) {
if (!(n % i)) {
if (i == n / i)
count++;
else
count += 2;
}
}
return count;
}
int main() {
cout << "The first " << MAX << " terms of the sequence are:" << endl;
for (int i = 1, next = 1; next <= MAX; ++i) {
if (next == count_divisors(i)) {
cout << i << " ";
next++;
}
}
cout << endl;
return 0;
}</syntaxhighlight>
{{out}}
<pre>
The first 15 terms of the sequence are:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
===Alternative===
{{Trans|Pascal}}
More terms and quicker than the straightforward C version above. [https://tio.run/##bVJNb9NAFLz7V0yLGu1ihzopJ38EIbgiJMSBG3J3N84KZ@1417QI5a8T3tuQNqm42W/emxnPWA3DvFXqcHhlneombVApH7TtV8nZZDP2jibJ5K1r4Zqt8UOjDGizKI5omSSqdz7AuoBP77@hxt2yTJBMztvWGR2B1oSP9qfVZvQfXBAXmJP4nQAXM800GXYZ9BfjM4zG02RBvHjY2M5AXAmHGRaSjuGwWjHKa2laYv@8JjReQ0tUddTBjmgcbqFL2DWI44a1auQMshbhOcsAuj@N0pqZSzqssSuJ47Zmgv1J5IzleIpomM74nBc1vyz5aTRhGh1RXZFjvIuLVUWPxVFjnyQcwLaxTrCni1hsBvcYMlCWFCNrDSPN1@L668ZgbUfq4UajccHOCaG6MHSTRzOaAtcZ9xMdNlPoqUT6HB9Mo399V12vfhSF6x@EpGQ4pMcQE48xxI/ivMRRmZAXjVoqoj5eseuTLTJDsvYplsiRpry2wluJ2QziBRNhkWop5b8jRENiwTkxjHnsfc7u9rCx8acqCKauTx965mPryYmgVyn0NDbB9q7S/XTfmZX4TwpE74N8o/qJPEn6iRZ5nksi3R8Of9S6a1p/mH@@@ws Try It Online!]<syntaxhighlight lang="cpp">#include <cstdio>
#include <chrono>
using namespace std::chrono;
const int MAX = 32;
unsigned int getDividersCnt(unsigned int n) {
unsigned int d = 3, q, dRes, res = 1;
while (!(n & 1)) { n >>= 1; res++; }
while ((d * d) <= n) { q = n / d; if (n % d == 0) { dRes = 0;
do { dRes += res; n = q; q /= d; } while (n % d == 0);
res += dRes; } d += 2; } return n != 1 ? res << 1 : res; }
int main() { unsigned int i, nxt, DivCnt;
printf("The first %d anti-primes plus are: ", MAX);
auto st = steady_clock::now(); i = nxt = 1; do {
if ((DivCnt = getDividersCnt(i)) == nxt ) { printf("%d ", i);
if ((++nxt > 4) && (getDividersCnt(nxt) == 2))
i = (1 << (nxt - 1)) - 1; } i++; } while (nxt <= MAX);
printf("%d ms", (int)(duration<double>(steady_clock::now() - st).count() * 1000));
}</syntaxhighlight>
{{out}}
<pre>The first 32 anti-primes plus are: 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624 4632 65536 65572 262144 262192 263169 269312 4194304 4194306 4477456 4493312 4498641 4498752 268435456 268437200 1073741824 1073741830 223 ms</pre>
=={{header|Delphi}}==
{{works with|Delphi|6.0}}
{{libheader|SysUtils,StdCtrls}}
<syntaxhighlight lang="Delphi">
{These routines would normally be in a library, but the shown here for clarity}
function GetAllProperDivisors(N: Integer;var IA: TIntegerDynArray): integer;
{Make a list of all the "proper dividers" for N}
{Proper dividers are the of numbers the divide evenly into N}
var I: integer;
begin
SetLength(IA,0);
for I:=1 to N-1 do
if (N mod I)=0 then
begin
SetLength(IA,Length(IA)+1);
IA[High(IA)]:=I;
end;
Result:=Length(IA);
end;
function GetAllDivisors(N: Integer;var IA: TIntegerDynArray): integer;
{Make a list of all the "proper dividers" for N, Plus N itself}
begin
Result:=GetAllProperDivisors(N,IA)+1;
SetLength(IA,Length(IA)+1);
IA[High(IA)]:=N;
end;
procedure SmallestWithNDivisors(Memo: TMemo);
var N,Count: integer;
var IA: TIntegerDynArray;
begin
Count:=1;
for N:=1 to high(Integer) do
if Count=GetAllDivisors(N,IA) then
begin
Memo.Lines.Add(IntToStr(Count)+' - '+IntToStr(N));
Inc(Count);
if Count>15 then break;
end;
end;
</syntaxhighlight>
{{out}}
<pre>
1 - 1
2 - 2
3 - 4
4 - 6
5 - 16
6 - 18
7 - 64
8 - 66
9 - 100
10 - 112
11 - 1024
12 - 1035
13 - 4096
14 - 4288
15 - 4624
Elapsed Time: 58.590 ms.
</pre>
=={{header|Dyalect}}==
{{trans|Go}}
<syntaxhighlight lang="dyalect">func countDivisors(n) {
var count = 0
var i = 1
while i * i <= n {
if n % i == 0 {
if i == n / i {
count += 1
} else {
count += 2
}
}
i += 1
}
return count
}
let max = 15
print("The first \(max) terms of the sequence are:")
var (i, next) = (1, 1)
while next <= max {
if next == countDivisors(i) {
print("\(i) ", terminator: "")
next += 1
}
i += 1
}
print()</syntaxhighlight>
{{out}}
<pre>The first 15 terms of the sequence are:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624</pre>
=={{header|EasyLang}}==
{{trans|AWK}}
<syntaxhighlight>
func ndivs n .
i = 1
while i <= sqrt n
if n mod i = 0
cnt += 2
if i = n div i
cnt -= 1
.
.
i += 1
.
return cnt
.
n = 1
while n <= 15
i += 1
if n = ndivs i
write i & " "
n += 1
.
.
</syntaxhighlight>
=={{header|F_Sharp|F#}}==
===First 28 are easy with a Naive implementation===
<syntaxhighlight lang="fsharp">
// Nigel Galloway: November 19th., 2017
let fN g=[1..(float>>sqrt>>int)g]|>List.fold(fun Σ n->if g%n>0 then Σ else if g/n=n then Σ+1 else Σ+2) 0
let A069654=let rec fG n g=seq{match g-fN n with 0->yield n; yield! fG(n+1)(g+1) |_->yield! fG(n+1)g} in fG 1 1
A069654 |> Seq.take 28|>Seq.iter(printf "%d "); printfn ""
</syntaxhighlight>
{{out}}
<pre>
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624 4632 65536 65572 262144 262192 263169 269312 4194304 4194306 4477456 4493312 4498641 4498752
</pre>
=={{header|Factor}}==
<syntaxhighlight lang="factor">USING: io kernel math math.primes.factors prettyprint sequences ;
: next ( n num -- n' num' )
[ 2dup divisors length = ] [ 1 + ] do until [ 1 + ] dip ;
: A069654 ( n -- seq )
[ 2 1 ] dip [ [ next ] keep ] replicate 2nip ;
"The first 15 terms of the sequence are:" print 15 A069654 .</syntaxhighlight>
{{out}}
<pre>
The first 15 terms of the sequence are:
{ 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624 }
</pre>
=={{header|FreeBASIC}}==
<syntaxhighlight lang="freebasic">#define UPTO 15
function divisors(byval n as ulongint) as uinteger
'find the number of divisors of an integer
dim as integer r = 2, i
for i = 2 to n\2
if n mod i = 0 then r += 1
next i
return r
end function
dim as ulongint i = 2
dim as integer n, nfound = 1
print 1;" "; 'special case
while nfound < UPTO
n = divisors(i)
if n = nfound + 1 then
nfound += 1
print i;" ";
end if
i+=1
wend
print
end</syntaxhighlight>
{{out}}<pre> 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624</pre>
=={{header|Go}}==
<syntaxhighlight lang="go">package main
import "fmt"
func countDivisors(n int) int {
count := 0
for i := 1; i*i <= n; i++ {
if n%i == 0 {
if i == n/i {
count++
} else {
count += 2
}
}
}
return count
}
func main() {
const max = 15
fmt.Println("The first", max, "terms of the sequence are:")
for i, next := 1, 1; next <= max; i++ {
if next == countDivisors(i) {
fmt.Printf("%d ", i)
next++
}
}
fmt.Println()
}</syntaxhighlight>
{{out}}
<pre>
The first 15 terms of the sequence are:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|Haskell}}==
<syntaxhighlight lang="haskell">import Text.Printf (printf)
sequence_A069654 :: [(Int,Int)]
sequence_A069654 = go 1 $ (,) <*> countDivisors <$> [1..]
where go t ((n,c):xs) | c == t = (t,n):go (succ t) xs
| otherwise = go t xs
countDivisors n = foldr f 0 [1..floor $ sqrt $ realToFrac n]
where f x r | n `mod` x == 0 = if n `div` x == x then r+1 else r+2
| otherwise = r
main :: IO ()
main = mapM_ (uncurry $ printf "a(%2d)=%5d\n") $ take 15 sequence_A069654</syntaxhighlight>
{{out}}
<pre>a( 1)= 1
a( 2)= 2
a( 3)= 4
a( 4)= 6
a( 5)= 16
a( 6)= 18
a( 7)= 64
a( 8)= 66
a( 9)= 100
a(10)= 112
a(11)= 1024
a(12)= 1035
a(13)= 4096
a(14)= 4288
a(15)= 4624
</pre>
=={{header|J}}==
<syntaxhighlight lang="j">
sieve=: 3 :0
NB. sieve y returns a vector of y boxes.
NB. In each box is an array of 2 columns.
NB. The first column is the factor tally
NB. and the second column is a number with
NB. that many factors.
NB. Rather than factoring, the algorithm
NB. counts prime seive cell hits.
NB. The boxes are not ordered by factor tally.
range=. <. + i.@:|@:-
tally=. y#0
for_i.#\tally do.
j=. }:^:(y<:{:)i * 1 range >: <. y % i
tally=. j >:@:{`[`]} tally
end.
(</.~ {."1) (,. i.@:#)tally
)
</syntaxhighlight>
<pre>
A=: sieve 100000
B=: /:~ A
missing=: [: (-.~i.@:#) (<0 0)&{&>
C=: ({.~ {.@:missing) B
D=:{:"1 L:_1 C
(] , [ {~ (I. {:))&.>/@:|. D
+-----------------------------------------------------------------------+
|0 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624 4632 65536 65572|
+-----------------------------------------------------------------------+
</pre>
Intermediate steps and explanation for a smaller sieve:
<pre>
] A=: sieve 60
+---+---+----+----+----+----+----+----+----+-----+
|0 0|1 1|2 2|3 4|4 6|6 12|5 16|8 24|9 36|10 48|
| | |2 3|3 9|4 8|6 18| |8 30| | |
| | |2 5|3 25|4 10|6 20| |8 40| | |
| | |2 7|3 49|4 14|6 28| |8 42| | |
| | |2 11| |4 15|6 32| |8 54| | |
| | |2 13| |4 21|6 44| |8 56| | |
| | |2 17| |4 22|6 45| | | | |
| | |2 19| |4 26|6 50| | | | |
| | |2 23| |4 27|6 52| | | | |
| | |2 29| |4 33| | | | | |
| | |2 31| |4 34| | | | | |
| | |2 37| |4 35| | | | | |
| | |2 41| |4 38| | | | | |
| | |2 43| |4 39| | | | | |
| | |2 47| |4 46| | | | | |
| | |2 53| |4 51| | | | | |
| | |2 59| |4 55| | | | | |
| | | | |4 57| | | | | |
| | | | |4 58| | | | | |
+---+---+----+----+----+----+----+----+----+-----+
] B=: /:~ A NB. ascending sort by tally
+---+---+----+----+----+----+----+----+----+-----+
|0 0|1 1|2 2|3 4|4 6|5 16|6 12|8 24|9 36|10 48|
| | |2 3|3 9|4 8| |6 18|8 30| | |
| | |2 5|3 25|4 10| |6 20|8 40| | |
| | |2 7|3 49|4 14| |6 28|8 42| | |
| | |2 11| |4 15| |6 32|8 54| | |
| | |2 13| |4 21| |6 44|8 56| | |
| | |2 17| |4 22| |6 45| | | |
| | |2 19| |4 26| |6 50| | | |
| | |2 23| |4 27| |6 52| | | |
| | |2 29| |4 33| | | | | |
| | |2 31| |4 34| | | | | |
| | |2 37| |4 35| | | | | |
| | |2 41| |4 38| | | | | |
| | |2 43| |4 39| | | | | |
| | |2 47| |4 46| | | | | |
| | |2 53| |4 51| | | | | |
| | |2 59| |4 55| | | | | |
| | | | |4 57| | | | | |
| | | | |4 58| | | | | |
+---+---+----+----+----+----+----+----+----+-----+
NB. truncate to the fully populated length
NB. missing lists the unavailable factor tallies
missing=: [: (-.~i.@:#) (<0 0)&{&>
] C=: ({.~ {.@:missing) B NB. retain tally counts with no holes
+---+---+----+----+----+----+----+
|0 0|1 1|2 2|3 4|4 6|5 16|6 12|
| | |2 3|3 9|4 8| |6 18|
| | |2 5|3 25|4 10| |6 20|
| | |2 7|3 49|4 14| |6 28|
| | |2 11| |4 15| |6 32|
| | |2 13| |4 21| |6 44|
| | |2 17| |4 22| |6 45|
| | |2 19| |4 26| |6 50|
| | |2 23| |4 27| |6 52|
| | |2 29| |4 33| | |
| | |2 31| |4 34| | |
| | |2 37| |4 35| | |
| | |2 41| |4 38| | |
| | |2 43| |4 39| | |
| | |2 47| |4 46| | |
| | |2 53| |4 51| | |
| | |2 59| |4 55| | |
| | | | |4 57| | |
| | | | |4 58| | |
+---+---+----+----+----+----+----+
NB. Remove the tally column from each box (by retaining the values)
,.L:_1 D=:{:"1 L:_1 C
+-+-+--+--+--+--+--+
|0|1| 2| 4| 6|16|12|
| | | 3| 9| 8| |18|
| | | 5|25|10| |20|
| | | 7|49|14| |28|
| | |11| |15| |32|
| | |13| |21| |44|
| | |17| |22| |45|
| | |19| |26| |50|
| | |23| |27| |52|
| | |29| |33| | |
| | |31| |34| | |
| | |37| |35| | |
| | |41| |38| | |
| | |43| |39| | |
| | |47| |46| | |
| | |53| |51| | |
| | |59| |55| | |
| | | | |57| | |
| | | | |58| | |
+-+-+--+--+--+--+--+
NB. finally enlist successively larger values
(] , [ {~ (I. {:))&.>/@:|. D
+---------------+
|0 1 2 4 6 16 18|
+---------------+
</pre>
=={{header|Java}}==
{{trans|C}}
<syntaxhighlight lang="java">public class AntiPrimesPlus {
static int count_divisors(int n) {
int count = 0;
for (int i = 1; i * i <= n; ++i) {
if (n % i == 0) {
if (i == n / i)
count++;
else
count += 2;
}
}
return count;
}
public static void main(String[] args) {
final int max = 15;
System.out.printf("The first %d terms of the sequence are:\n", max);
for (int i = 1, next = 1; next <= max; ++i) {
if (next == count_divisors(i)) {
System.out.printf("%d ", i);
next++;
}
}
System.out.println();
}
}</syntaxhighlight>
{{out}}
<pre>
The first 15 terms of the sequence are:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|jq}}==
'''Adapted from [[Julia]]'''
{{works with|jq}}
'''Works with gojq, the Go implementation of jq'''
<syntaxhighlight lang="jq">
# The number of prime factors (as in prime factorization)
def numfactors:
. as $num
| reduce range(1; 1 + sqrt|floor) as $i (null;
if ($num % $i) == 0
then ($num / $i) as $r
| if $i == $r then .+1 else .+2 end
else .
end );
# Output: a stream
def A06954:
foreach range(1; infinite) as $i ({k: 0};
.j = .k + 1
| until( $i == (.j | numfactors); .j += 1)
| .k = .j ;
.j ) ;
"First 15 terms of OEIS sequence A069654: ",
[limit(15; A06954)]</syntaxhighlight>
{{out}}
<pre>
First 15 terms of OEIS sequence A069654:
[1,2,4,6,16,18,64,66,100,112,1024,1035,4096,4288,4624]
</pre>
=={{header|Julia}}==
{{trans|Perl}}
<syntaxhighlight lang="julia">using Primes
function numfactors(n)
f = [one(n)]
for (p,e) in factor(n)
f = reduce(vcat, [f*p^j for j in 1:e], init=f)
end
length(f)
end
function A06954(N)
println("First $N terms of OEIS sequence A069654: ")
k = 0
for i in 1:N
j = k
while (j += 1) > 0
if i == numfactors(j)
print("$j ")
k = j
break
end
end
end
end
A06954(15)
</syntaxhighlight>{{out}}
<pre>
First 15 terms of OEIS sequence A069654:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|Kotlin}}==
{{trans|Go}}
<syntaxhighlight lang="scala">// Version 1.3.21
const val MAX = 15
fun countDivisors(n: Int): Int {
var count = 0
var i = 1
while (i * i <= n) {
if (n % i == 0) {
count += if (i == n / i) 1 else 2
}
i++
}
return count
}
fun main() {
println("The first $MAX terms of the sequence are:")
var i = 1
var next = 1
while (next <= MAX) {
if (next == countDivisors(i)) {
print("$i ")
next++
}
i++
}
println()
}</syntaxhighlight>
{{output}}
<pre>
The first 15 terms of the sequence are:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|Mathematica}} / {{header|Wolfram Language}}==
<syntaxhighlight lang="mathematica">res = {#, DivisorSigma[0, #]} & /@ Range[100000];
highest = 0;
filter = {};
Do[
If[r[[2]] == highest + 1,
AppendTo[filter, r[[1]]];
highest = r[[2]]
]
,
{r, res}
]
Take[filter, 15]</syntaxhighlight>
{{out}}
<pre>{1, 2, 4, 6, 16, 18, 64, 66, 100, 112, 1024, 1035, 4096, 4288, 4624}</pre>
=={{header|Maxima}}==
<syntaxhighlight lang="maxima">
sngptend(n):=block([i:1,count:1,result:[]],
while count<=n do (if length(listify(divisors(i)))=count then (result:endcons(i,result),count:count+1),i:i+1),
result)$
/* Test case */
sngptend(15);
</syntaxhighlight>
{{out}}
<pre>
[1,2,4,6,16,18,64,66,100,112,1024,1035,4096,4288,4624]
</pre>
=={{header|MiniScript}}==
This GUI implementation is for use with [http://miniscript.org/MiniMicro Mini Micro].
<syntaxhighlight lang="miniscript">
divisors = function(n)
divs = {1: 1}
divs[n] = 1
i = 2
while i * i <= n
if n % i == 0 then
divs[i] = 1
divs[n / i] = 1
end if
i += 1
end while
return divs.indexes
end function
counts = []
j = 1
for i in range(1, 15)
while divisors(j).len != i
j += 1
end while
counts.push(j)
end for
print "The first 15 terms in the sequence are:"
print counts.join(", ")
</syntaxhighlight>
{{out}}
<pre>
The first 15 terms in the sequence are:
1, 2, 4, 6, 16, 18, 64, 66, 100, 112, 1024, 1035, 4096, 4288, 4624</pre>
=={{header|Nim}}==
<syntaxhighlight lang="nim">import strformat
const MAX = 15
func countDivisors(n: int): int =
var i = 1
var count = 0
while i * i <= n:
if n mod i == 0:
if i == n div i:
inc count
else:
inc count, 2
inc i
count
var i, next = 1
echo fmt"The first {MAX} terms of the sequence are:"
while next <= MAX:
if next == countDivisors(i):
write(stdout, fmt"{i} ")
inc next
inc i
write(stdout, "\n")</syntaxhighlight>
{{out}}
<pre>
The first 15 terms of the sequence are:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|Pascal}}==
Counting divisors by prime factorisation.<BR>
If divCnt= Count of divisors is prime then the only candidate ist n = prime^(divCnt-1).
There will be more rules. If divCnt is odd then the divisors of divCnt are a^(even_factor*i)*..*k^(even_factor*j).
I think of next = 33 aka 11*3 with the solution 1031^2 * 2^10=1,088,472,064 with a big distance to next= 32 => 1073741830.<BR>
[https://tio.run/##fVRdb9owFH3Pr7gPk0hYWCG0e2hKJcbHhtQCapm0vSCZxAGvwaa2U1ZV/PWxazsQ2k7jIeR@n3t8HLH4RRPd2BCVkLyRbZL9fiPFUpI1dLlmU8nWVE3zQsXey4fRsD8YwnDa23kALx9uJ/0B9Gm@WbEdRgc39wMX6E6ns5/TAfQm4/vJzWAHZ2eQ2jyTNu6PhjuvUFRhsnpWhWa5CtdEr2IvEVxpdN92f0CnHcUeeFnBE80EhyXVffbEUipVj2ufX35nXLejoPyPPZzyOgcWz5Aak/ElcMA0AUwr2JitICOJFlKZMvJAMN6BKLpomr95q96eR/WLeRtWRIHf@tgK6n5kn218Ysq564yDvCciEbIxw8dC6BBX1eSOqlBSpeESDvgWdMk4ZqK7yDHQgZZZEJAeUwzGE8VoKbohkmjYMr0ShbatFVKAqdsVyymMhfYnaerzIIBUoPtL2RpwDezC4f7bne2OP8YT340MjIPy9DA1k2INXGwB2RU8fwaRpsCL9cJs5TayoNrxcbKvHqVvAsFVh78bjtzfCoQVVmQYDoISSAaWkQ40Qa@oK6mKAQ7EmZnNuHRKuqFEl4bb5pRgu5YLHXMsB2b628D/8QEUKPncgby6riBUDB7PtixxZB5gmabRCclIMe6cE2znxAYiMzosFYgJoyHaOKpVEVKpw73VUTnlmTmhzZqoqRHXn8/NCBZy@luHuBkK/r3WtpJpmnO/Nluh4plEKLUQb1dYA4LLNiwQxIM3HIiklzULf9bE8V@pnrHkoSeK46yDZsHMPBonJ@RgmMib28pKwnBhl9NxPf6pAwvaZ4ixFpyegak4Oiy3tseBT9vMCdnaPnSuYS2URkcEwdzWN1qBKVAiL7S7UiUsG4VrOA@gO@6D//ZzY2abb0NQYba4LA2gVjkc@zdaMX5UmJmDsCVdU65pCiTTVG6JTNV77Th@nP7GDgieUlyd4Mmr//pkGrMmMrVWhivs@cnb7/8kWU6Wat@YRH8B Try it online!]
<syntaxhighlight lang="pascal">program AntiPrimesPlus;
{$IFDEF FPC}
{$MODE Delphi}
{$ELSE}
{$APPTYPE CONSOLE} // delphi
{$ENDIF}
uses
sysutils,math;
const
MAX =32;
function getDividersCnt(n:Uint32):Uint32;
// getDividersCnt by dividing n into its prime factors
// aka n = 2250 = 2^1*3^2*5^3 has (1+1)*(2+1)*(3+1)= 24 dividers
var
divi,quot,deltaRes,rest : Uint32;
begin
result := 1;
//divi := 2; //separat without division
while Not(Odd(n)) do
Begin
n := n SHR 1;
inc(result);
end;
//from now on only odd numbers
divi := 3;
while (sqr(divi)<=n) do
Begin
DivMod(n,divi,quot,rest);
if rest = 0 then
Begin
deltaRes := 0;
repeat
inc(deltaRes,result);
n := quot;
DivMod(n,divi,quot,rest);
until rest <> 0;
inc(result,deltaRes);
end;
inc(divi,2);
end;
//if last factor of n is prime
IF n <> 1 then
result := result*2;
end;
var
T0 : Int64;
i,next,DivCnt: Uint32;
begin
writeln('The first ',MAX,' anti-primes plus are:');
T0:= GetTickCount64;
i := 1;
next := 1;
repeat
DivCnt := getDividersCnt(i);
IF DivCnt= next then
Begin
write(i,' ');
inc(next);
//if next is prime then only prime( => mostly 2 )^(next-1) is solution
IF (next > 4) AND (getDividersCnt(next) = 2) then
i := 1 shl (next-1) -1;// i is incremented afterwards
end;
inc(i);
until Next > MAX;
writeln;
writeln(GetTickCount64-T0,' ms');
end.</syntaxhighlight>
{{out}}
<pre>The first 32 anti-primes plus are:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624 4632 65536 65572 262144 262192 263169 269312 4194304 4194306 4477456 4493312 4498641 4498752 268435456 268437200 1073741824 1073741830
525 ms</pre>
=={{header|Perl}}==
{{libheader|ntheory}}
<syntaxhighlight lang="perl">use strict;
use warnings;
use ntheory 'divisors';
print "First 15 terms of OEIS: A069654\n";
my $m = 0;
for my $n (1..15) {
my $l = $m;
while (++$l) {
print("$l "), $m = $l, last if $n == divisors($l);
}
}</syntaxhighlight>
{{out}}
<pre>First 15 terms of OEIS: A069654
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624</pre>
=={{header|Phix}}==
Uses the optimisation trick from pascal, of n:=power(2,next-1) when next is a prime>4.
<!--<syntaxhighlight lang="phix">(phixonline)-->
<span style="color: #008080;">with</span> <span style="color: #008080;">javascript_semantics</span>
<span style="color: #008080;">constant</span> <span style="color: #000000;">limit</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">15</span>
<span style="color: #004080;">sequence</span> <span style="color: #000000;">res</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">repeat</span><span style="color: #0000FF;">(</span><span style="color: #000000;">0</span><span style="color: #0000FF;">,</span><span style="color: #000000;">limit</span><span style="color: #0000FF;">)</span>
<span style="color: #004080;">integer</span> <span style="color: #000000;">next</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">1</span>
<span style="color: #004080;">atom</span> <span style="color: #000000;">n</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">1</span>
<span style="color: #008080;">while</span> <span style="color: #000000;">next</span><span style="color: #0000FF;"><=</span><span style="color: #000000;">limit</span> <span style="color: #008080;">do</span>
<span style="color: #004080;">integer</span> <span style="color: #000000;">k</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #7060A8;">factors</span><span style="color: #0000FF;">(</span><span style="color: #000000;">n</span><span style="color: #0000FF;">,</span><span style="color: #000000;">1</span><span style="color: #0000FF;">))</span>
<span style="color: #008080;">if</span> <span style="color: #000000;">k</span><span style="color: #0000FF;">=</span><span style="color: #000000;">next</span> <span style="color: #008080;">then</span>
<span style="color: #000000;">res</span><span style="color: #0000FF;">[</span><span style="color: #000000;">k</span><span style="color: #0000FF;">]</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">n</span>
<span style="color: #000000;">next</span> <span style="color: #0000FF;">+=</span> <span style="color: #000000;">1</span>
<span style="color: #008080;">if</span> <span style="color: #000000;">next</span><span style="color: #0000FF;">></span><span style="color: #000000;">4</span> <span style="color: #008080;">and</span> <span style="color: #7060A8;">is_prime</span><span style="color: #0000FF;">(</span><span style="color: #000000;">next</span><span style="color: #0000FF;">)</span> <span style="color: #008080;">then</span>
<span style="color: #000000;">n</span> <span style="color: #0000FF;">:=</span> <span style="color: #7060A8;">power</span><span style="color: #0000FF;">(</span><span style="color: #000000;">2</span><span style="color: #0000FF;">,</span><span style="color: #000000;">next</span><span style="color: #0000FF;">-</span><span style="color: #000000;">1</span><span style="color: #0000FF;">)-</span><span style="color: #000000;">1</span> <span style="color: #000080;font-style:italic;">-- (-1 for +=1 next)</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
<span style="color: #000000;">n</span> <span style="color: #0000FF;">+=</span> <span style="color: #000000;">1</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">while</span>
<span style="color: #7060A8;">printf</span><span style="color: #0000FF;">(</span><span style="color: #000000;">1</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"The first %d terms are: %v\n"</span><span style="color: #0000FF;">,{</span><span style="color: #000000;">limit</span><span style="color: #0000FF;">,</span><span style="color: #000000;">res</span><span style="color: #0000FF;">})</span>
<!--</syntaxhighlight>-->
{{out}}
<pre>
The first 15 terms are: {1,2,4,6,16,18,64,66,100,112,1024,1035,4096,4288,4624}
</pre>
You can raise the limit to 32, the 25th takes about 4s but the rest are all near-instant, however I lost patience waiting for the 33rd.<br>
<small>(The last two trailing .0 just mean "not a 31-bit integer" and don't appear when run on 64 bit.)</small>
<pre>
The first 32 terms are: {1,2,4,6,16,18,64,66,100,112,1024,1035,4096,4288,4624,
4632,65536,65572,262144,262192,263169,269312,4194304,
4194306,4477456,4493312,4498641,4498752,268435456,
268437200,1073741824.0,1073741830.0}
</pre>
=={{header|PL/I}}==
See [[#Polyglot:PL/I and PL/M]]
=={{header|PL/M}}==
{{Trans|Go}} via Algol 68
<syntaxhighlight lang="pli">100H: /* FIND THE SMALLEST NUMBER > THE PREVIOUS ONE WITH EXACTLY N DIVISORS */
/* CP/M BDOS SYSTEM CALL */
BDOS: PROCEDURE( FN, ARG ); DECLARE FN BYTE, ARG ADDRESS; GOTO 5; END;
/* CONSOLE OUTPUT ROUTINES */
PR$CHAR: PROCEDURE( C ); DECLARE C BYTE; CALL BDOS( 2, C ); END;
PR$STRING: PROCEDURE( S ); DECLARE S ADDRESS; CALL BDOS( 9, S ); END;
PR$NL: PROCEDURE; CALL PR$STRING( .( 0DH, 0AH, '$' ) ); END;
PR$NUMBER: PROCEDURE( N );
DECLARE N ADDRESS;
DECLARE V ADDRESS, N$STR( 6 ) BYTE INITIAL( '.....$' ), W BYTE;
N$STR( W := LAST( N$STR ) - 1 ) = '0' + ( ( V := N ) MOD 10 );
DO WHILE( ( V := V / 10 ) > 0 );
N$STR( W := W - 1 ) = '0' + ( V MOD 10 );
END;
CALL PR$STRING( .N$STR( W ) );
END PR$NUMBER;
/* TASK */
/* RETURNS THE DIVISOR COUNT OF N */
COUNT$DIVISORS: PROCEDURE( N )ADDRESS;
DECLARE N ADDRESS;
DECLARE ( I, I2, COUNT ) ADDRESS;
COUNT = 0;
I = 1;
DO WHILE( ( I2 := I * I ) < N );
IF N MOD I = 0 THEN COUNT = COUNT + 2;
I = I + 1;
END;
IF I2 = N THEN RETURN ( COUNT + 1 ); ELSE RETURN ( COUNT );
END COUNT$DIVISORS ;
DECLARE MAX LITERALLY '15';
DECLARE ( I, NEXT ) ADDRESS;
CALL PR$STRING( .'THE FIRST $' );
CALL PR$NUMBER( MAX );
CALL PR$STRING( .' TERMS OF THE SEQUENCE ARE:$' );
NEXT = 1;
I = 1;
DO WHILE( NEXT <= MAX );
IF NEXT = COUNT$DIVISORS( I ) THEN DO;
CALL PR$CHAR( ' ' );
CALL PR$NUMBER( I );
NEXT = NEXT + 1;
END;
I = I + 1;
END;
EOF</syntaxhighlight>
{{out}}
<pre>
THE FIRST 15 TERMS OF THE SEQUENCE ARE: 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
See also [[#Polyglot:PL/I and PL/M]]
=={{header|Polyglot:PL/I and PL/M}}==
{{works with|8080 PL/M Compiler}} ... under CP/M (or an emulator)
Should work with many PL/I implementations.
<br>
The PL/I include file "pg.inc" can be found on the [[Polyglot:PL/I and PL/M]] page.
Note the use of text in column 81 onwards to hide the PL/I specifics from the PL/M compiler.
{{Trans|PL/M}}
<syntaxhighlight lang="pli"> /* FIND THE SMALLEST NUMBER > THE PREVIOUS ONE WITH EXACTLY N DIVISORS */
sequence_100H: procedure options (main);
/* PROGRAM-SPECIFIC %REPLACE STATEMENTS MUST APPEAR BEFORE THE %INCLUDE AS */
/* E.G. THE CP/M PL/I COMPILER DOESN'T LIKE THEM TO FOLLOW PROCEDURES */
/* PL/I */
%replace maxnumber by 15;
/* PL/M */ /*
DECLARE MAXNUMBER LITERALLY '15';
/* */
/* PL/I DEFINITIONS */
%include 'pg.inc';
/* PL/M DEFINITIONS: CP/M BDOS SYSTEM CALL AND CONSOLE I/O ROUTINES, ETC. */ /*
DECLARE BINARY LITERALLY 'ADDRESS', CHARACTER LITERALLY 'BYTE';
DECLARE FIXED LITERALLY ' ', BIT LITERALLY 'BYTE';
DECLARE STATIC LITERALLY ' ', RETURNS LITERALLY ' ';
DECLARE FALSE LITERALLY '0', TRUE LITERALLY '1';
DECLARE HBOUND LITERALLY 'LAST', SADDR LITERALLY '.';
BDOSF: PROCEDURE( FN, ARG )BYTE;
DECLARE FN BYTE, ARG ADDRESS; GOTO 5; END;
BDOS: PROCEDURE( FN, ARG ); DECLARE FN BYTE, ARG ADDRESS; GOTO 5; END;
PRCHAR: PROCEDURE( C ); DECLARE C BYTE; CALL BDOS( 2, C ); END;
PRSTRING: PROCEDURE( S ); DECLARE S ADDRESS; CALL BDOS( 9, S ); END;
PRNL: PROCEDURE; CALL PRCHAR( 0DH ); CALL PRCHAR( 0AH ); END;
PRNUMBER: PROCEDURE( N );
DECLARE N ADDRESS;
DECLARE V ADDRESS, N$STR( 6 ) BYTE, W BYTE;
N$STR( W := LAST( N$STR ) ) = '$';
N$STR( W := W - 1 ) = '0' + ( ( V := N ) MOD 10 );
DO WHILE( ( V := V / 10 ) > 0 );
N$STR( W := W - 1 ) = '0' + ( V MOD 10 );
END;
CALL BDOS( 9, .N$STR( W ) );
END PRNUMBER;
MODF: PROCEDURE( A, B )ADDRESS;
DECLARE ( A, B )ADDRESS;
RETURN( A MOD B );
END MODF;
MIN: PROCEDURE( A, B ) ADDRESS;
DECLARE ( A, B ) ADDRESS;
IF A < B THEN RETURN( A ); ELSE RETURN( B );
END MIN;
/* END LANGUAGE DEFINITIONS */
/* TASK */
COUNTDIVISORS: PROCEDURE( N )RETURNS /* THE DIVISOR COUNT OF N */ (
FIXED BINARY )
;
DECLARE N FIXED BINARY;
DECLARE ( I, I2, COUNT ) FIXED BINARY;
COUNT = 0;
I = 1;
I2 = 1;
DO WHILE( I2 < N );
IF MODF( N, I ) = 0 THEN COUNT = COUNT + 2;
I = I + 1;
I2 = I * I;
END;
IF I2 = N THEN RETURN ( COUNT + 1 ); ELSE RETURN ( COUNT );
END COUNTDIVISORS ;
DECLARE ( I, NEXT ) FIXED BINARY;
CALL PRSTRING( SADDR( 'THE FIRST $' ) );
CALL PRNUMBER( MAXNUMBER );
CALL PRSTRING( SADDR( ' TERMS OF THE SEQUENCE ARE:$' ) );
NEXT = 1;
I = 1;
DO WHILE( NEXT <= MAXNUMBER );
IF NEXT = COUNTDIVISORS( I ) THEN DO;
CALL PRCHAR( ' ' );
CALL PRNUMBER( I );
NEXT = NEXT + 1;
END;
I = I + 1;
END;
EOF: end sequence_100H;</syntaxhighlight>
{{out}}
<pre>
THE FIRST 15 TERMS OF THE SEQUENCE ARE: 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|Python}}==
<syntaxhighlight lang="python">
def divisors(n):
divs = [1]
for ii in range(2, int(n ** 0.5) + 3):
if n % ii == 0:
divs.append(ii)
divs.append(int(n / ii))
divs.append(n)
return list(set(divs))
def sequence(max_n=None):
previous = 0
n = 0
while True:
n += 1
ii = previous
if max_n is not None:
if n > max_n:
break
while True:
ii += 1
if len(divisors(ii)) == n:
yield ii
previous = ii
break
if __name__ == '__main__':
for item in sequence(15):
print(item)
</syntaxhighlight>
<b>Output:</b>
<syntaxhighlight lang="python">
1
2
4
6
16
18
64
66
100
112
1024
1035
4096
4288
4624
</syntaxhighlight>
=={{header|Quackery}}==
<code>factors</code> is defined at [[Factors of an integer#Quackery]].
<syntaxhighlight lang="quackery"> [ stack ] is terms ( --> s )
[ temp put
[] terms put
0 1
[ dip 1+
over factors size
over = if
[ over
terms take
swap join
terms put
1+ ]
terms share size
temp share = until ]
terms take
temp release
dip 2drop ] is task ( n --> [ )
15 task echo</syntaxhighlight>
{{out}}
<pre>[ 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624 ]</pre>
=={{header|R}}==
<syntaxhighlight lang="rsplus">#Need to add 1 to account for skipping n. Not the most efficient way to count divisors, but quite clear.
divisorCount <- function(n) length(Filter(function(x) n %% x == 0, seq_len(n %/% 2))) + 1
A06954 <- function(terms)
{
out <- 1
while((resultCount <- length(out)) != terms)
{
n <- resultCount + 1
out[n] <- out[resultCount]
while(divisorCount(out[n]) != n) out[n] <- out[n] + 1
}
out
}
print(A06954(15))</syntaxhighlight>
{{out}}
<pre>[1] 1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624</pre>
=={{header|Raku}}==
(formerly Perl 6)
{{works with|Rakudo|2019.03}}
<syntaxhighlight lang="raku" line>sub div-count (\x) {
return 2 if x.is-prime;
+flat (1 .. x.sqrt.floor).map: -> \d {
unless x % d { my \y = x div d; y == d ?? y !! (y, d) }
}
}
my $limit = 15;
my $m = 1;
put "First $limit terms of OEIS:A069654";
put (1..$limit).map: -> $n { my $ = $m = first { $n == .&div-count }, $m..Inf };
</syntaxhighlight>
{{out}}
<pre>
First 15 terms of OEIS:A069654
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|REXX}}==
Programming note: this Rosetta Code task (for 15 sequence numbers) doesn't require any optimization, but the code was optimized for listing higher numbers.
The method used is to find the number of proper divisors (up to the integer square root of '''X'''), and add one.
Optimization was included when examining ''even'' or ''odd'' index numbers (determine how much to increment the '''do''' loop).
<syntaxhighlight lang="rexx">/*REXX program finds and displays N numbers of the "anti─primes plus" sequence. */
parse arg N . /*obtain optional argument from the CL.*/
if N=='' | N=="," then N= 15 /*Not specified? Then use the default.*/
idx= 1 /*the maximum number of divisors so far*/
say '──index── ──anti─prime plus──' /*display a title for the numbers shown*/
#= 0 /*the count of anti─primes found " " */
do i=1 until #==N /*step through possible numbers by twos*/
d= #divs(i); if d\==idx then iterate /*get # divisors; Is too small? Skip.*/
#= # + 1; idx= idx + 1 /*found an anti─prime #; set new minD.*/
say center(#, 8) right(i, 15) /*display the index and the anti─prime.*/
end /*i*/
exit 0 /*stick a fork in it, we're all done. */
/*──────────────────────────────────────────────────────────────────────────────────────*/
#divs: procedure; parse arg x 1 y /*X and Y: both set from 1st argument.*/
if x<7 then do /*handle special cases for numbers < 7.*/
if x<3 then return x /* " " " " one and two.*/
if x<5 then return x - 1 /* " " " " three & four*/
if x==5 then return 2 /* " " " " five. */
if x==6 then return 4 /* " " " " six. */
end
odd= x // 2 /*check if X is odd or not. */
if odd then #= 1; /*Odd? Assume Pdivisors count of 1.*/
else do; #= 3; y= x % 2 /*Even? " " " " 3.*/
end /* [↑] Even, so add 2 known divisors.*/
/* [↓] start with known number of Pdivs*/
do k=3 for x%2-3 by 1+odd while k<y /*for odd numbers, skip over the evens.*/
if x//k==0 then do /*if no remainder, then found a divisor*/
#= # + 2; y= x % k /*bump the # Pdivs; calculate limit Y.*/
if k>=y then do; #= # - 1; leave
end /* [↑] has the limit been reached? */
end /* ___ */
else if k*k>x then leave /*only divide up to the √ x */
end /*k*/ /* [↑] this form of DO loop is faster.*/
return # + 1 /*bump "proper divisors" to "divisors".*/</syntaxhighlight>
{{out|output|text= when using the default input:}}
<pre>
──index── ──anti─prime plus──
1 1
2 2
3 4
4 6
5 16
6 18
7 64
8 66
9 100
10 112
11 1024
12 1035
13 4096
14 4288
15 4624
</pre>
=={{header|Ring}}==
<
# Project : ANti-primes
Line 46 ⟶ 1,770:
next
return ansum
</syntaxhighlight>
{{out}}
<pre>
Line 57 ⟶ 1,781:
done...
</pre>
=={{header|RPL}}==
{{works with|HP|49g}}
≪ {1}
2 ROT '''FOR''' j
DUP DUP SIZE GET
'''DO''' 1 + '''UNTIL''' DUP DIVIS SIZE j == '''END'''
+
'''NEXT '''
≫ '<span style="color:blue">TASK</span>' STO
15 <span style="color:blue">TASK</span>
{{out}}
<pre>
1: {1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624}
</pre>
Runs in 10 minutes 55 on a HP-50g.
=={{header|Ruby}}==
<syntaxhighlight lang="ruby">require 'prime'
def num_divisors(n)
n.prime_division.inject(1){|prod, (_p,n)| prod *= (n + 1) }
end
seq = Enumerator.new do |y|
cur = 0
(1..).each do |i|
if num_divisors(i) == cur + 1 then
y << i
cur += 1
end
end
end
p seq.take(15)
</syntaxhighlight>
{{out}}
<pre>[1, 2, 4, 6, 16, 18, 64, 66, 100, 112, 1024, 1035, 4096, 4288, 4624]
</pre>
=={{header|Sidef}}==
<syntaxhighlight lang="ruby">func n_divisors(n, from=1) {
from..Inf -> first_by { .sigma0 == n }
}
with (1) { |from|
say 15.of { from = n_divisors(_+1, from) }
}</syntaxhighlight>
{{out}}
<pre>
[1, 2, 4, 6, 16, 18, 64, 66, 100, 112, 1024, 1035, 4096, 4288, 4624]
</pre>
=={{header|Swift}}==
Includes an optimization borrowed from the Pascal example above.
<syntaxhighlight lang="swift">// See https://en.wikipedia.org/wiki/Divisor_function
func divisorCount(number: Int) -> Int {
var n = number
var total = 1
// Deal with powers of 2 first
while n % 2 == 0 {
total += 1
n /= 2
}
// Odd prime factors up to the square root
var p = 3
while p * p <= n {
var count = 1
while n % p == 0 {
count += 1
n /= p
}
total *= count
p += 2
}
// If n > 1 then it's prime
if n > 1 {
total *= 2
}
return total
}
let limit = 32
var n = 1
var next = 1
while next <= limit {
if next == divisorCount(number: n) {
print(n, terminator: " ")
next += 1
if next > 4 && divisorCount(number: next) == 2 {
n = 1 << (next - 1) - 1;
}
}
n += 1
}
print()</syntaxhighlight>
{{out}}
<pre>
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624 4632 65536 65572 262144 262192 263169 269312 4194304 4194306 4477456 4493312 4498641 4498752 268435456 268437200 1073741824 1073741830
</pre>
=={{header|Wren}}==
{{trans|Phix}}
{{libheader|Wren-math}}
<syntaxhighlight lang="wren">import "./math" for Int
var limit = 24
var res = List.filled(limit, 0)
var next = 1
var n = 1
while (next <= limit) {
var k = Int.divisors(n).count
if (k == next) {
res[k-1] = n
next = next + 1
if (next > 4 && Int.isPrime(next)) n = 2.pow(next-1) - 1
}
n = n + 1
}
System.print("The first %(limit) terms are:")
System.print(res)</syntaxhighlight>
{{out}}
<pre>
The first 24 terms are:
[1, 2, 4, 6, 16, 18, 64, 66, 100, 112, 1024, 1035, 4096, 4288, 4624, 4632, 65536, 65572, 262144, 262192, 263169, 269312, 4194304, 4194306]
</pre>
=={{header|XPL0}}==
<syntaxhighlight lang="xpl0">func Divs(N); \Count divisors of N
int N, D, C;
[C:= 0;
if N > 1 then
[D:= 1;
repeat if rem(N/D) = 0 then C:= C+1;
D:= D+1;
until D >= N;
];
return C;
];
int An, N;
[An:= 1; N:= 0;
loop [if Divs(An) = N then
[IntOut(0, An); ChOut(0, ^ );
N:= N+1;
if N >= 15 then quit;
];
An:= An+1;
];
]</syntaxhighlight>
{{out}}
<pre>
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
=={{header|zkl}}==
<syntaxhighlight lang="zkl">fcn countDivisors(n)
{ [1..(n).toFloat().sqrt()] .reduce('wrap(s,i){ s + (if(0==n%i) 1 + (i!=n/i)) },0) }</syntaxhighlight>
<syntaxhighlight lang="zkl">n:=15;
println("The first %d anti-primes plus are:".fmt(n));
(1).walker(*).tweak(
fcn(n,rn){ if(rn.value==countDivisors(n)){ rn.inc(); n } else Void.Skip }.fp1(Ref(1)))
.walk(n).concat(" ").println();</syntaxhighlight>
{{out}}
<pre>
The first 15 anti-primes plus are:
1 2 4 6 16 18 64 66 100 112 1024 1035 4096 4288 4624
</pre>
|