Category:68000 Assembly: Difference between revisions
m
→The Vector Table
Puppydrum64 (talk | contribs) m (→Length) |
Puppydrum64 (talk | contribs) |
||
Line 184:
* It's best to push all registers (D0 thru D7 and A0-A6) onto the stack at the start and pop them off at the end. This is not required for the traps you call with the <code>TRAP #?</code> command, but for the others it's absolutely necessary, since you can't know in advance when they'll happen. You can leave out A7 when doing this since that's the stack pointer itself.
==Interrupts==
The 68000 supports 7 different interrupts, often called IRQs or Interrupt Requests. Enabling interrupts is often a twofold process: first, the interrupt source must be enabled, which is usually an implementation-defined process that involves interacting with memory-mapped ports. Second, the status register must be set accordingly to allow the interrupt to occur, which can be achieved with <code>MOVE #$2x00,SR</code> where X is the desired interrupt level. X can range from 0 to 7, and for an interrupt to occur, its interrupt level (which is determined by the hardware implementation and the placement of the desired address in the vector table) must be greater than X or it will not happen (even if the source is enabled.)
==Alignment==
| |||