Faces from a mesh
A mesh defining a surface has uniquely numbered vertices, and named, simple-polygonal faces described usually by an ordered list of edge numbers going around the face,
For example:
External image of two faces
Rough textual version without edges:
1 17 7 A B 11 23
- A is the triangle (1, 11, 7), or equally (7, 11, 1), going anti-clockwise, or
any of all the rotations of those ordered vertices.
1 7 A 11
- B is the four-sided face (1, 17, 23, 11), or equally (23, 17, 1, 11) or any
of their rotations.
1 17 B 11 23
Let's call the above the perimeter format as it traces around the perimeter.
- A second format
A separate algorithm returns polygonal faces consisting of a face name and an unordered set of edge definitions for each face.
- A single edge is described by the vertex numbers at its two ends, always in
ascending order.
- All edges for the face are given, but in an undefined order.
For example face A could be described by the edges (1, 11), (7, 11), and (1, 7) (The order of each vertex number in an edge is ascending, but the order in which the edges are stated is arbitrary).
Similarly face B could be described by the edges (11, 23), (1, 17), (17, 23), and (1, 11) in arbitrary order of the edges.
Let's call this second format the edge format.
- Task
1. Write a routine to check if two perimeter formatted faces have the same perimeter use it o check if the following pairs of perimeters are the same:
Q: (8, 1, 3) R: (1, 3, 8) U: (18, 8, 14, 10, 12, 17, 19) V: (8, 14, 10, 12, 17, 19, 18)
2. Write a routine and use it to transform the following faces from edge to perimeter format.
E: {(1, 11), (7, 11), (1, 7)} F: {(11, 23), (1, 17), (17, 23), (1, 11)} G: {(8, 14), (17, 19), (10, 12), (10, 14), (12, 17), (8, 18), (18, 19)} H: {(1, 3), (9, 11), (3, 11), (1, 11)}
Show your output here.
Go
<lang go>package main
import (
"fmt" "sort"
)
// Check a slice contains a value. func contains(s []int, f int) bool {
for _, e := range s { if e == f { return true } } return false
}
// Assumes s1, s2 are of same length. func sliceEqual(s1, s2 []int) bool {
for i := 0; i < len(s1); i++ { if s1[i] != s2[i] { return false } } return true
}
// Reverses slice in place. func reverse(s []int) {
for i, j := 0, len(s)-1; i < j; i, j = i+1, j-1 { s[i], s[j] = s[j], s[i] }
}
// Check two perimeters are equal. func perimEqual(p1, p2 []int) bool {
le := len(p1) if le != len(p2) { return false } for _, p := range p1 { if !contains(p2, p) { return false } } // use copy to avoid mutating 'p1' c := make([]int, le) copy(c, p1) for r := 0; r < 2; r++ { for i := 0; i < le; i++ { if sliceEqual(c, p2) { return true } // do circular shift to right t := c[le-1] copy(c[1:], c[0:le-1]) c[0] = t } // now process in opposite direction reverse(c) } return false
}
type edge [2]int
// Translates a face to perimeter format. func faceToPerim(face []edge) []int {
// use copy to avoid mutating 'face' le := len(face) if le == 0 { return nil } edges := make([]edge, le) for i := 0; i < le; i++ { // check edge pairs are in correct order if face[i][1] <= face[i][0] { return nil } edges[i] = face[i] } // sort edges in ascending order sort.Slice(edges, func(i, j int) bool { if edges[i][0] != edges[j][0] { return edges[i][0] < edges[j][0] } return edges[i][1] < edges[j][1] }) var perim []int first, last := edges[0][0], edges[0][1] perim = append(perim, first, last) // remove first edge copy(edges, edges[1:]) edges = edges[0 : le-1] le--
outer:
for le > 0 { for i, e := range edges { found := false if e[0] == last { perim = append(perim, e[1]) last, found = e[1], true } else if e[1] == last { perim = append(perim, e[0]) last, found = e[0], true } if found { // remove i'th edge copy(edges[i:], edges[i+1:]) edges = edges[0 : le-1] le-- if last == first { if le == 0 { break outer } else { return nil } } continue outer } } } return perim[0 : len(perim)-1]
}
func main() {
fmt.Println("Perimeter format equality checks:") areEqual := perimEqual([]int{8, 1, 3}, []int{1, 3, 8}) fmt.Printf(" Q == R is %t\n", areEqual) areEqual = perimEqual([]int{18, 8, 14, 10, 12, 17, 19}, []int{8, 14, 10, 12, 17, 19, 18}) fmt.Printf(" U == V is %t\n", areEqual) e := []edge{{7, 11}, {1, 11}, {1, 7}} f := []edge{{11, 23}, {1, 17}, {17, 23}, {1, 11}} g := []edge{{8, 14}, {17, 19}, {10, 12}, {10, 14}, {12, 17}, {8, 18}, {18, 19}} h := []edge{{1, 3}, {9, 11}, {3, 11}, {1, 11}} fmt.Println("\nEdge to perimeter format translations:") for i, face := range [][]edge{e, f, g, h} { perim := faceToPerim(face) if perim == nil { fmt.Printf(" %c => Invalid edge format\n", i + 'E') } else { fmt.Printf(" %c => %v\n", i + 'E', perim) } }
}</lang>
- Output:
Perimeter format equality checks: Q == R is true U == V is true Edge to perimeter format translations: E => [1 7 11] F => [1 11 23 17] G => [8 14 10 12 17 19 18] H => Invalid edge format
Julia
<lang julia>iseq(f, g) = any(n -> f == circshift(g, n), 1:length(g))
vec_and_set(edges) = (a = Int[]; for e in edges push!(a, e[1], e[2]) end; (a, Set(a)))
isvalid(edges) = ((a, s) = vec_and_set(edges); all(x -> sum(y -> y == x, a) == 2, s))
function toface(evec)
if isempty(evec) || !isvalid(evec) throw("Invalid Edge vector for a Face.") end toarr(p) = [p[1], p[2]] ret, edges = toarr(evec[1]), copy(evec[2:end]) while !isempty(edges) i = findfirst(x -> ret[end] == x[1] || ret[end] == x[2], edges) pts = toarr(edges[i]) push!(ret, ret[end] == pts[1] ? pts[2] : pts[1]) deleteat!(edges, i) end return ret[1:end-1]
end
const faces1 = [
[[8, 1, 3], [1, 3, 8]], [[18, 8, 14, 10, 12, 17, 19], [8, 14, 10, 12, 17, 19, 18]]
]
const faces2 = [
[(1, 11), (7, 11), (1, 7)], [(11, 23), (1, 17), (17, 23), (1, 11)], [(8, 14), (17, 19), (10, 12), (10, 14), (12, 17), (8, 18), (18, 19)], [(1, 3), (9, 11), (3, 11), (1, 11)]
]
for faces in faces1
println("Faces are ", iseq(faces[1], faces[2]) ? "" : "not ", "equivalent.")
end
for face in faces2
println(toface(face))
end
</lang>
- Output:
Faces are equivalent. Faces are equivalent. [1, 11, 7] [11, 23, 17, 1] [8, 14, 10, 12, 17, 19, 18] ERROR: LoadError: "Invalid Edge vector for a Face."
Perl 6
<lang perl6>sub check-equivalence ($a, $b) { so $a.Bag eqv $b.Bag }
sub edge-to-periphery (@a is copy) {
return Nil unless @a.List.Bag.values.all == 2; my @b = @a.shift.flat; while @a > 1 { for @a.kv -> $k, $v { if $v[0] == @b.tail { @b.push: $v[1]; @a.splice($k,1); last } elsif $v[1] == @b.tail { @b.push: $v[0]; @a.splice($k,1); last } } } @b
}
say 'Perimeter format equality checks:';
for (8, 1, 3), (1, 3, 8),
(18, 8, 14, 10, 12, 17, 19), (8, 14, 10, 12, 17, 19, 18) -> $a, $b { say "({$a.join: ', '}) equivalent to ({$b.join: ', '})? ", check-equivalence($a, $b)
}
say "\nEdge to perimeter format translations:";
for ((1, 11), (7, 11), (1, 7)),
((11, 23), (1, 17), (17, 23), (1, 11)), ((8, 14), (17, 19), (10, 12), (10, 14), (12, 17), (8, 18), (18, 19)), ((1, 3), (9, 11), (3, 11), (1, 11)) { .gist.print; say " ==> ({.&edge-to-periphery || 'Invalid edge format'})";
}</lang>
- Output:
Perimeter format equality checks: (8, 1, 3) equivalent to (1, 3, 8)? True (18, 8, 14, 10, 12, 17, 19) equivalent to (8, 14, 10, 12, 17, 19, 18)? True Edge to perimeter format translations: ((1 11) (7 11) (1 7)) ==> (1 11 7) ((11 23) (1 17) (17 23) (1 11)) ==> (11 23 17 1) ((8 14) (17 19) (10 12) (10 14) (12 17) (8 18) (18 19)) ==> (8 14 10 12 17 19 18) ((1 3) (9 11) (3 11) (1 11)) ==> (Invalid edge format)
Python
<lang python>def perim_equal(p1, p2):
# Cheap tests first if len(p1) != len(p2) or set(p1) != set(p2): return False if any(p2 == (p1[n:] + p1[:n]) for n in range(len(p1))): return True p2 = p2[::-1] # not inplace return any(p2 == (p1[n:] + p1[:n]) for n in range(len(p1)))
def edge_to_periphery(e):
edges = sorted(e) p = list(edges.pop(0)) if edges else [] last = p[-1] if p else None while edges: for n, (i, j) in enumerate(edges): if i == last: p.append(j) last = j edges.pop(n) break elif j == last: p.append(i) last = i edges.pop(n) break else: #raise ValueError(f'Invalid edge format: {e}') return ">>>Error! Invalid edge format<<<" return p[:-1]
if __name__ == '__main__':
print('Perimeter format equality checks:') for eq_check in [ { 'Q': (8, 1, 3), 'R': (1, 3, 8)}, { 'U': (18, 8, 14, 10, 12, 17, 19), 'V': (8, 14, 10, 12, 17, 19, 18)} ]: (n1, p1), (n2, p2) = eq_check.items() eq = '==' if perim_equal(p1, p2) else '!=' print(' ', n1, eq, n2)
print('\nEdge to perimeter format translations:') edge_d = { 'E': {(1, 11), (7, 11), (1, 7)}, 'F': {(11, 23), (1, 17), (17, 23), (1, 11)}, 'G': {(8, 14), (17, 19), (10, 12), (10, 14), (12, 17), (8, 18), (18, 19)}, 'H': {(1, 3), (9, 11), (3, 11), (1, 11)} } for name, edges in edge_d.items(): print(f" {name}: {edges}\n -> {edge_to_periphery(edges)}")</lang>
- Output:
Perimeter format equality checks: Q == R U == V Edge to perimeter format translations: E: {(7, 11), (1, 11), (1, 7)} -> [1, 7, 11] F: {(11, 23), (1, 11), (1, 17), (17, 23)} -> [1, 11, 23, 17] G: {(8, 14), (17, 19), (10, 12), (10, 14), (12, 17), (8, 18), (18, 19)} -> [8, 14, 10, 12, 17, 19, 18] H: {(1, 11), (9, 11), (1, 3), (3, 11)} -> >>>Error! Invalid edge format<<<
zkl
<lang zkl>fcn perimSame(p1, p2){
if(p1.len() != p2.len()) return(False); False == p1.filter1('wrap(p){ (not p2.holds(p)) })
}
fcn edge_to_periphery(faces){
edges:=faces.copy().sort(fcn(a,b){ if(a[0]!=b[0]) a[0]<b[0] else a[1]<b[1] }); p,last := ( if(edges) edges.pop(0).copy() else T ), ( p and p[-1] or Void ); while(edges){ foreach i,j in (edges){ if (i==last){ p.append( last=j ); edges.del(__iWalker.idx); break; } else if(j==last){ p.append( last=i ); edges.del(__iWalker.idx); break; } } fallthrough{ return(">>>Error! Invalid edge format<<<") } } p[0,-1] // last element not part of result
}</lang> <lang zkl>println("Perimeter format equality checks:"); ps:=T( T( T(8,1,3), T(1,3,8) ),
T( T(18, 8, 14, 10, 12, 17, 19), T(8, 14, 10, 12, 17, 19, 18) ) );
foreach p1,p2 in (ps)
{ println(pp(p1), " equivalent to ", pp(p2), "? ", perimSame(p1,p2)) }
println("\nEdge to perimeter format translations:"); edge_d:=T(
T(T( 1, 11), T( 7, 11), T( 1, 7) ), T(T(11, 23), T( 1, 17), T(17, 23), T( 1, 11) ), T(T( 8, 14), T(17, 19), T(10, 12), T(10, 14), T(12, 17), T(8, 18), T(18, 19) ), T(T( 1, 3), T( 9, 11), T( 3, 11), T( 1, 11) ), );
foreach edges in (edge_d)
{ println(ppp(edges), " --> ", edge_to_periphery(edges)) }
fcn pp(a){ a.concat(", ","(",")") } fcn ppp(edges){ pp(edges.apply(pp)) }</lang>
- Output:
Perimeter format equality checks: (8, 1, 3) equivalent to (1, 3, 8)? True (18, 8, 14, 10, 12, 17, 19) equivalent to (8, 14, 10, 12, 17, 19, 18)? True Edge to perimeter format translations: ((1 11), (7 11), (1 7)) --> L(1,7,11) ((11 23), (1 17), (17 23), (1 11)) --> L(1,11,23,17) ((8 14), (17 19), (10 12), (10 14), (12 17), (8 18), (18 19)) --> L(8,14,10,12,17,19,18) ((1 3), (9 11), (3 11), (1 11)) --> >>>Error! Invalid edge format<<<