Sorting algorithms/Bubble sort

From Rosetta Code
Task
Sorting algorithms/Bubble sort
You are encouraged to solve this task according to the task description, using any language you may know.

A   bubble   sort is generally considered to be the simplest sorting algorithm.

A   bubble   sort is also known as a   sinking   sort.

Because of its simplicity and ease of visualization, it is often taught in introductory computer science courses.

Because of its abysmal O(n2) performance, it is not used often for large (or even medium-sized) datasets.

The bubble sort works by passing sequentially over a list, comparing each value to the one immediately after it.   If the first value is greater than the second, their positions are switched.   Over a number of passes, at most equal to the number of elements in the list, all of the values drift into their correct positions (large values "bubble" rapidly toward the end, pushing others down around them).   Because each pass finds the maximum item and puts it at the end, the portion of the list to be sorted can be reduced at each pass.   A boolean variable is used to track whether any changes have been made in the current pass; when a pass completes without changing anything, the algorithm exits.

This can be expressed in pseudo-code as follows (assuming 1-based indexing):

repeat
    if itemCount <= 1
        return
    hasChanged := false
    decrement itemCount
    repeat with index from 1 to itemCount
        if (item at index) > (item at (index + 1))
            swap (item at index) with (item at (index + 1))
            hasChanged := true
until hasChanged = false


Task

Sort an array of elements using the bubble sort algorithm.   The elements must have a total order and the index of the array can be of any discrete type.   For languages where this is not possible, sort an array of integers.


References



11l

Translation of: Python
F bubble_sort(&seq)
   V changed = 1B
   L changed == 1B
      changed = 0B
      L(i) 0 .< seq.len - 1
         I seq[i] > seq[i + 1]
            swap(&seq[i], &seq[i + 1])
            changed = 1B

V testset = Array(0.<100)
V testcase = copy(testset)
random:shuffle(&testcase)
assert(testcase != testset)
bubble_sort(&testcase)
assert(testcase == testset)

360 Assembly

For maximum compatibility, this program uses only the basic instruction set. The program uses also HLASM structured macros (DO,ENDDO,IF,ELSE,ENDIF) for readability and two ASSIST/360 macros (XDECO,XPRNT) to keep the code as short as possible.

*        Bubble Sort               01/11/2014 & 23/06/2016
BUBBLE   CSECT
         USING  BUBBLE,R13,R12     establish base registers
SAVEAREA B      STM-SAVEAREA(R15)  skip savearea
         DC     17F'0'             my savearea
STM      STM    R14,R12,12(R13)    save calling context
         ST     R13,4(R15)         link mySA->prevSA 
         ST     R15,8(R13)         link prevSA->mySA
         LR     R13,R15            set mySA & set 4K addessability
         LA     R12,2048(R13)      .
         LA     R12,2048(R12)      set 8K addessability 
         L      RN,N               n
         BCTR   RN,0               n-1
         DO UNTIL=(LTR,RM,Z,RM)    repeat  ------------------------+
         LA     RM,0                 more=false                    |
         LA     R1,A                 @a(i)                         |
         LA     R2,4(R1)             @a(i+1)                       |
         LA     RI,1                 i=1                           |
         DO WHILE=(CR,RI,LE,RN)      for i=1 to n-1  ------------+ |
         L      R3,0(R1)               a(i)                      | |   
         IF     C,R3,GT,0(R2)          if a(i)>a(i+1) then  ---+ | |
         L      R9,0(R1)                 r9=a(i)               | | |
         L      R3,0(R2)                 r3=a(i+1)             | | |
         ST     R3,0(R1)                 a(i)=r3               | | |
         ST     R9,0(R2)                 a(i+1)=r9             | | |
         LA     RM,1                     more=true             | | |
         ENDIF  ,                      end if  <---------------+ | |
         LA     RI,1(RI)               i=i+1                     | |
         LA     R1,4(R1)               next a(i)                 | |
         LA     R2,4(R2)               next a(i+1)               | |
         ENDDO  ,                    end for  <------------------+ |
         ENDDO  ,                  until not more  <---------------+
         LA     R3,PG              pgi=0
         LA     RI,1               i=1
         DO WHILE=(C,RI,LE,N)      do i=1 to n  -------+
         LR     R1,RI                i                 |
         SLA    R1,2                 .                 |
         L      R2,A-4(R1)           a(i)              |
         XDECO  R2,XDEC              edit a(i)         |
         MVC    0(4,R3),XDEC+8       output a(i)       |
         LA     R3,4(R3)             pgi=pgi+4         |
         LA     RI,1(RI)             i=i+1             |
         ENDDO  ,                  end do  <-----------+
         XPRNT  PG,L'PG            print buffer
         L      R13,4(0,R13)       restore caller savearea
         LM     R14,R12,12(R13)    restore context
         XR     R15,R15            set return code to 0
         BR     R14                return to caller
A     DC F'4',F'65',F'2',F'-31',F'0',F'99',F'2',F'83',F'782',F'1'
      DC F'45',F'82',F'69',F'82',F'104',F'58',F'88',F'112',F'89',F'74'
N        DC     A((N-A)/L'A)       number of items of a *
PG       DC     CL80' '
XDEC     DS     CL12
         LTORG  
         REGEQU 
RI       EQU    6                  i
RN       EQU    7                  n-1
RM       EQU    8                  more
         END    BUBBLE
Output:
 -31   0   1   2   2   4  45  58  65  69  74  82  82  83  88  89  99 104 112 782

6502 Assembly

Code can be copied and pasted into Easy6502. Make sure you set the monitor to $1200 and check the check box to view it in action. Bubble Sort's infamous reputation is very well-deserved as this is going to take a few minutes to finish. This example takes a reverse identity table (where the 0th entry is $FF, the first is $FE, and so on) and sorts them in ascending order. Slowly. And the program might not run unless its tab is active in your browser. I'd play Game Boy to pass the time. ;)

define z_HL $00
define z_L  $00
define z_H  $01
define temp $02
define temp2 $03

set_table:
dex
txa
sta $1200,y
iny
bne set_table	;stores $ff at $1200, $fe at $1201, etc.

lda #$12
sta z_H
lda #$00
sta z_L

lda #0
tax
tay		;clear regs

JSR BUBBLESORT
BRK

BUBBLESORT:
lda (z_HL),y
sta temp
iny		;look at the next item
lda (z_HL),y
dey		;go back 1 to the "current item"
sta temp2
cmp temp
bcs doNothing

    ;we had to re-arrange an item.
    lda temp
    iny
    sta (z_HL),y   ;store the higher value at base+y+1
    inx ;sort count. If zero at the end, we're done.
    dey
    lda temp2
    sta (z_HL),y   ;store the lower value at base+y 

doNothing:
iny
cpy #$ff
bne BUBBLESORT
ldy #0
txa     ;check the value of the counter
beq DoneSorting
ldx #0	;reset the counter
jmp BUBBLESORT
DoneSorting:
rts
Output:
1200: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
1210: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 
1220: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 
1230: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 
1240: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 
1250: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 
1260: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f 
1270: 70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f 
1280: 80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f 
1290: 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f 
12a0: a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af 
12b0: b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf 
12c0: c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf 
12d0: d0 d1 d2 d3 d4 d5 d6 d7 d8 d9 da db dc dd de df 
12e0: e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 ea eb ec ed ee ef 
12f0: f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff

AArch64 Assembly

Works with: as version Raspberry Pi 3B version Buster 64 bits
/* ARM assembly AARCH64 Raspberry PI 3B */
/*  program bubbleSort64.s  */
 
/*******************************************/
/* Constantes file                         */
/*******************************************/
/* for this file see task include a file in language AArch64 assembly */
.include "../includeConstantesARM64.inc"

/*********************************/
/* Initialized data              */
/*********************************/
.data
szMessSortOk:       .asciz "Table sorted.\n"
szMessSortNok:      .asciz "Table not sorted !!!!!.\n"
sMessResult:        .asciz "Value  : @ \n"
szCarriageReturn:   .asciz "\n"
 
.align 4
TableNumber:      .quad   1,3,6,2,5,9,10,8,4,7
#TableNumber:     .quad   10,9,8,7,6,5,4,3,2,1
                 .equ NBELEMENTS, (. - TableNumber) / 8 
/*********************************/
/* UnInitialized data            */
/*********************************/
.bss
sZoneConv:       .skip 24
/*********************************/
/*  code section                 */
/*********************************/
.text
.global main 
main:                                              // entry of program 
    ldr x0,qAdrTableNumber                         // address number table
    mov x1,0
    mov x2,NBELEMENTS                              // number of élements 
    bl bubbleSort
    ldr x0,qAdrTableNumber                         // address number table
    bl displayTable
 
    ldr x0,qAdrTableNumber                         // address number table
    mov x1,NBELEMENTS                              // number of élements 
    bl isSorted                                    // control sort
    cmp x0,1                                       // sorted ?
    beq 1f                                    
    ldr x0,qAdrszMessSortNok                       // no !! error sort
    bl affichageMess
    b 100f
1:                                                 // yes
    ldr x0,qAdrszMessSortOk
    bl affichageMess
100:                                               // standard end of the program 
    mov x0,0                                       // return code
    mov x8,EXIT                                    // request to exit program
    svc 0                                          // perform the system call
 
qAdrsZoneConv:            .quad sZoneConv
qAdrszCarriageReturn:     .quad szCarriageReturn
qAdrsMessResult:          .quad sMessResult
qAdrTableNumber:          .quad TableNumber
qAdrszMessSortOk:         .quad szMessSortOk
qAdrszMessSortNok:        .quad szMessSortNok
/******************************************************************/
/*     control sorted table                                   */ 
/******************************************************************/
/* x0 contains the address of table */
/* x1 contains the number of elements  > 0  */
/* x0 return 0  if not sorted   1  if sorted */
isSorted:
    stp x2,lr,[sp,-16]!              // save  registers
    stp x3,x4,[sp,-16]!              // save  registers
    mov x2,0
    ldr x4,[x0,x2,lsl 3]
1:
    add x2,x2,1
    cmp x2,x1
    bge 99f
    ldr x3,[x0,x2, lsl 3]
    cmp x3,x4
    blt 98f
    mov x4,x3
    b 1b
98:
    mov x0,0                       // not sorted
    b 100f
99:
    mov x0,1                       // sorted
100:
    ldp x3,x4,[sp],16              // restaur  2 registers
    ldp x2,lr,[sp],16              // restaur  2 registers
    ret                            // return to address lr x30
/******************************************************************/
/*         bubble sort                                              */ 
/******************************************************************/
/* x0 contains the address of table */
/* x1 contains the first element    */
/* x2 contains the number of element */
bubbleSort:
    stp x1,lr,[sp,-16]!        // save  registers
    stp x2,x3,[sp,-16]!        // save  registers
    stp x4,x5,[sp,-16]!        // save  registers
    stp x6,x7,[sp,-16]!        // save  registers
    stp x8,x9,[sp,-16]!        // save  registers
    sub x2,x2,1                // compute i = n - 1
    add x8,x1,1
1:                             // start loop 1
    mov x3,x1                  // start index
    mov x9,0
    sub x7,x2,1
2:                             // start loop 2
    add x4,x3,1
    ldr x5,[x0,x3,lsl 3]       // load value A[j]
    ldr x6,[x0,x4,lsl 3]       // load value A[j+1]
    cmp x6,x5                  // compare value
    bge 3f 
    str x6,[x0,x3,lsl 3]       // if smaller inversion
    str x5,[x0,x4,lsl 3] 
    mov x9,1                   // top table not sorted
3:
    add x3,x3,1                // increment index j
    cmp x3,x7                  // end ?
    ble 2b                     // no -> loop 2
    cmp x9,0                   // table sorted ?
    beq 100f                   // yes -> end

    sub x2,x2,1                // decrement i
    cmp x2,x8                  // end ?
    bge 1b                     // no -> loop 1
 
100:
    ldp x8,x9,[sp],16          // restaur  2 registers
    ldp x6,x7,[sp],16          // restaur  2 registers
    ldp x4,x5,[sp],16          // restaur  2 registers
    ldp x2,x3,[sp],16          // restaur  2 registers
    ldp x1,lr,[sp],16          // restaur  2 registers
    ret                        // return to address lr x30
 
/******************************************************************/
/*      Display table elements                                */ 
/******************************************************************/
/* x0 contains the address of table */
displayTable:
    stp x1,lr,[sp,-16]!              // save  registers
    stp x2,x3,[sp,-16]!              // save  registers
    mov x2,x0                        // table address
    mov x3,0
1:                                   // loop display table
    ldr x0,[x2,x3,lsl 3]
    ldr x1,qAdrsZoneConv
    bl conversion10                  // décimal conversion
    ldr x0,qAdrsMessResult
    ldr x1,qAdrsZoneConv
    bl strInsertAtCharInc            // insert result at @ character
    bl affichageMess                 // display message
    add x3,x3,1
    cmp x3,NBELEMENTS - 1
    ble 1b
    ldr x0,qAdrszCarriageReturn
    bl affichageMess
100:
    ldp x2,x3,[sp],16               // restaur  2 registers
    ldp x1,lr,[sp],16               // restaur  2 registers
    ret                             // return to address lr x30
/********************************************************/
/*        File Include fonctions                        */
/********************************************************/
/* for this file see task include a file in language AArch64 assembly */
.include "../includeARM64.inc"

ACL2

(defun bubble (xs)
   (if (endp (rest xs))
       (mv nil xs)
       (let ((x1 (first xs))
             (x2 (second xs)))
         (if (> x1 x2)
             (mv-let (_ ys)
                     (bubble (cons x1 (rest (rest xs))))
                (declare (ignore _))
                (mv t (cons x2 ys)))
             (mv-let (has-changed ys)
                     (bubble (rest xs))
                (mv has-changed (cons x1 ys)))))))

(defun bsort-r (xs limit)
   (declare (xargs :measure (nfix limit)))
   (if (zp limit)
       xs
       (mv-let (has-changed ys)
               (bubble xs)
          (if has-changed
              (bsort-r ys (1- limit))
              ys))))

(defun bsort (xs)
   (bsort-r xs (len xs)))

Action!

PROC PrintArray(INT ARRAY a INT size)
  INT i

  Put('[)
  FOR i=0 TO size-1
  DO
    IF i>0 THEN Put(' ) FI
    PrintI(a(i))
  OD
  Put(']) PutE()
RETURN

PROC BubbleSort(INT ARRAY a INT size)
  INT count,changed,i,tmp

  count=size
  IF count<=1 THEN RETURN FI

  DO
    changed=0
    count==-1
    FOR i=0 TO count-1
    DO
      IF a(i)>a(i+1) THEN
        tmp=a(i) a(i)=a(i+1) a(i+1)=tmp
        changed=1
      FI
    OD
  UNTIL changed=0
  OD
RETURN

PROC Test(INT ARRAY a INT size)
  PrintE("Array before sort:")
  PrintArray(a,size)
  BubbleSort(a,size)
  PrintE("Array after sort:")
  PrintArray(a,size)
  PutE()
RETURN

PROC Main()
  INT ARRAY
    a(10)=[1 4 65535 0 3 7 4 8 20 65530],
    b(21)=[10 9 8 7 6 5 4 3 2 1 0
      65535 65534 65533 65532 65531
      65530 65529 65528 65527 65526],
    c(8)=[101 102 103 104 105 106 107 108],
    d(12)=[1 65535 1 65535 1 65535 1
      65535 1 65535 1 65535]
  
  Test(a,10)
  Test(b,21)
  Test(c,8)
  Test(d,12)
RETURN
Output:

Screenshot from Atari 8-bit computer

Array before sort:
[1 4 -1 0 3 7 4 8 20 -6]
Array after sort:
[-6 -1 0 1 3 4 4 7 8 20]

Array before sort:
[10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10]
Array after sort:
[-10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10]

Array before sort:
[101 102 103 104 105 106 107 108]
Array after sort:
[101 102 103 104 105 106 107 108]

Array before sort:
[1 -1 1 -1 1 -1 1 -1 1 -1 1 -1]
Array after sort:
[-1 -1 -1 -1 -1 -1 1 1 1 1 1 1]

ActionScript

public function bubbleSort(toSort:Array):Array
{
	var changed:Boolean = false;
	
	while (!changed)
	{
		changed = true;
		
		for (var i:int = 0; i < toSort.length - 1; i++)
		{
			if (toSort[i] > toSort[i + 1])
			{
				var tmp:int = toSort[i];
				toSort[i] = toSort[i + 1];
				toSort[i + 1] = tmp;
				
				changed = false;
			}
		}
	}
	
	return toSort;
}

Ada

Works with: GCC version 4.1.2
generic
 type Element is private;
 with function "=" (E1, E2 : Element) return Boolean is <>;
 with function "<" (E1, E2 : Element) return Boolean is <>;
 type Index is (<>);
 type Arr is array (Index range <>) of Element;
procedure Bubble_Sort (A : in out Arr);

procedure Bubble_Sort (A : in out Arr) is
 Finished : Boolean;
 Temp     : Element;
begin
 loop
  Finished := True;
  for J in A'First .. Index'Pred (A'Last) loop
   if A (Index'Succ (J)) < A (J) then
    Finished := False;
    Temp := A (Index'Succ (J));
    A (Index'Succ (J)) := A (J);
    A (J) := Temp;
   end if;
  end loop;
  exit when Finished;
 end loop;
end Bubble_Sort;

--  Example of usage:
with Ada.Text_IO; use Ada.Text_IO;
with Bubble_Sort;
procedure Main is
 type Arr is array (Positive range <>) of Integer;
 procedure Sort is new
  Bubble_Sort
   (Element => Integer,
    Index   => Positive,
    Arr     => Arr);
 A : Arr := (1, 3, 256, 0, 3, 4, -1);
begin
 Sort (A);
 for J in A'Range loop
  Put (Integer'Image (A (J)));
 end loop;
 New_Line;
end Main;

ALGOL 60

Works with: A60
begin
    comment Sorting algorithms/Bubble sort - Algol 60;
    integer nA;
    nA:=20;
    
    begin
        integer array A[1:20]; 
        
        procedure bubblesort(lb,ub);
        value lb,ub; integer lb,ub;
        begin
            integer i;
            boolean swapped;
            swapped :=true;
            for i:=1 while swapped do begin
                swapped:=false;
                for i:=lb step  1 until ub-1 do if A[i]>A[i+1] then begin
                    integer temp;
                    temp  :=A[i];
                    A[i]  :=A[i+1];
                    A[i+1]:=temp;
                    swapped:=true
                end
            end
        end bubblesort;
     
        procedure inittable(lb,ub);
        value lb,ub; integer lb,ub;
        begin
            integer i;
            for i:=lb step 1 until ub do A[i]:=entier(rand*100)
        end inittable;
        
        procedure writetable(lb,ub);
        value lb,ub; integer lb,ub;
        begin
            integer i;
            for i:=lb step 1 until ub do outinteger(1,A[i]);
            outstring(1,"\n")
        end writetable;
        

        inittable(1,nA);
        writetable(1,nA);
        bubblesort(1,nA);
        writetable(1,nA)
    end
end
Output:
 70  92  61  64  74  5  89  52  38  91  59  57  51  34  81  27  57  51  32  74
 5  27  32  34  38  51  51  52  57  57  59  61  64  70  74  74  81  89  91  92

ALGOL 68

MODE DATA = INT; 
PROC swap = (REF[]DATA slice)VOID:
(
  DATA tmp = slice[1];
  slice[1] := slice[2];
  slice[2] := tmp
);

PROC sort = (REF[]DATA array)VOID:
(
  BOOL sorted;
  INT shrinkage := 0;
  FOR size FROM UPB array - 1 BY -1 WHILE
    sorted := TRUE;
    shrinkage +:= 1;
    FOR i FROM LWB array TO size DO
      IF array[i+1] < array[i] THEN
        swap(array[i:i+1]);
        sorted := FALSE
      FI
    OD;
    NOT sorted
  DO SKIP OD
);

main:(
  [10]INT random := (1,6,3,5,2,9,8,4,7,0); 

  printf(($"Before: "10(g(3))l$,random));
  sort(random);
  printf(($"After: "10(g(3))l$,random))
)
Output:
 Before:  +1 +6 +3 +5 +2 +9 +8 +4 +7 +0
 After:  +0 +1 +2 +3 +4 +5 +6 +7 +8 +9

ALGOL W

begin
    % As algol W does not allow overloading, we have to have type-specific   %
    % sorting procedures - this bubble sorts an integer array                %
    % as there is no way for the procedure to determine the array bounds, we %
    % pass the lower and upper bounds in lb and ub                           %
    procedure bubbleSortIntegers( integer array item( * )
                                ; integer value lb
                                ; integer value ub
                                ) ;
    begin
        integer lower, upper;

        lower := lb;
        upper := ub;

        while
            begin
                logical swapped;
                upper   := upper - 1;
                swapped := false;
                for i := lower until upper
                do begin
                    if item( i ) > item( i + 1 )
                    then begin
                        integer val;
                        val           := item( i );
                        item( i )     := item( i + 1 );
                        item( i + 1 ) := val;
                        swapped       := true;
                    end if_must_swap ;
                end for_i ;
                swapped
            end
        do  begin end;
    end bubbleSortIntegers ;

    begin % test the bubble sort                                             %
        integer array data( 1 :: 10 );

        procedure writeData ;
        begin
            write( data( 1 ) );
            for i := 2 until 10 do writeon( data( i ) );
        end writeData ;

        % initialise data to unsorted values                                 %
        integer       dPos;
        dPos  := 1;
        for i := 16, 2, -6, 9, 90, 14, 0, 23, 8, 9
        do begin
            data( dPos ) := i;
            dPos         := dPos + 1;
        end for_i ;

        i_w := 3; s_w := 1; % set output format %
        writeData;
        bubbleSortIntegers( data, 1, 10 );
        writeData;
    end test 
end.
Output:
 16   2  -6   9  90  14   0  23   8   9 
 -6   0   2   8   9   9  14  16  23  90 

AppleScript

In AppleScript, the time taken to set and check a "has changed" boolean repeatedly over the greater part of the sort generally matches or exceeds any time it may save. A more effective optimisation, since the greater value in any pair also takes part in the following comparison, is to keep the greater value in a variable and only fetch one value from the list for the next comparison.

-- In-place bubble sort.
on bubbleSort(theList, l, r) -- Sort items l thru r of theList.
    set listLen to (count theList)
    if (listLen < 2) then return
    -- Convert negative and/or transposed range indices.
    if (l < 0) then set l to listLen + l + 1
    if (r < 0) then set r to listLen + r + 1
    if (l > r) then set {l, r} to {r, l}
    
    -- The list as a script property to allow faster references to its items.
    script o
        property lst : theList
    end script
    
    set lPlus1 to l + 1
    repeat with j from r to lPlus1 by -1
        set lv to o's lst's item l
        -- Hereafter lv is only set when necessary and from rv rather than from the list.
        repeat with i from lPlus1 to j
            set rv to o's lst's item i
            if (lv > rv) then
                set o's lst's item (i - 1) to rv
                set o's lst's item i to lv
            else
                set lv to rv
            end if
        end repeat
    end repeat
    
    return -- nothing.
end bubbleSort
property sort : bubbleSort

-- Demo:
local aList
set aList to {61, 23, 11, 55, 1, 94, 71, 98, 70, 33, 29, 77, 58, 95, 2, 52, 68, 29, 27, 37, 74, 38, 45, 73, 10}
sort(aList, 1, -1) -- Sort items 1 thru -1 of aList.
return aList
Output:
{1, 2, 10, 11, 23, 27, 29, 29, 33, 37, 38, 45, 52, 55, 58, 61, 68, 70, 71, 73, 74, 77, 94, 95, 98}

Arendelle

A function that returns a sorted version of it's x input

< x > ( i , 0 )

( sjt , 1; 0; 0 ) // swapped:0 / j:1 / temp:2

[ @sjt = 1 ,

	( sjt , 0 )
	( sjt[ 1 ] , +1 )

	( i , 0 )

	[ @i < @x? - @sjt[ 1 ],

		{ @x[ @i ] < @x[ @i + 1 ],

			( sjt[ 2 ] , @x[ @i ] )
			( x[ @i ] , @x[ @i + 1 ] )
			( x[ @i + 1 ] , @sjt[ 2 ] )
			( sjt , 1 )
		}

		( i , +1 )
	]
]

( return , @x )

ARM Assembly

Works with: as version Raspberry Pi
/* ARM assembly Raspberry PI  */
/*  program bubbleSort.s  */
 
 /* REMARK 1 : this program use routines in a include file 
   see task Include a file language arm assembly 
   for the routine affichageMess conversion10 
   see at end of this program the instruction include */
/* for constantes see task include a file in arm assembly */
/************************************/
/* Constantes                       */
/************************************/
.include "../constantes.inc"

/*********************************/
/* Initialized data              */
/*********************************/
.data
szMessSortOk:       .asciz "Table sorted.\n"
szMessSortNok:      .asciz "Table not sorted !!!!!.\n"
sMessResult:        .asciz "Value  : @ \n"
szCarriageReturn:   .asciz "\n"
 
.align 4
#TableNumber:      .int   1,3,6,2,5,9,10,8,4,7
TableNumber:       .int   10,9,8,7,6,5,4,3,2,1
                   .equ NBELEMENTS, (. - TableNumber) / 4
/*********************************/
/* UnInitialized data            */
/*********************************/
.bss
sZoneConv:            .skip 24
/*********************************/
/*  code section                 */
/*********************************/
.text
.global main 
main:                                              @ entry of program 
 
1:
    ldr r0,iAdrTableNumber                         @ address number table
    mov r1,#0
    mov r2,#NBELEMENTS                             @ number of élements 
    bl bubbleSort
    ldr r0,iAdrTableNumber                         @ address number table
    bl displayTable
 
    ldr r0,iAdrTableNumber                         @ address number table
    mov r1,#NBELEMENTS                             @ number of élements 
    bl isSorted                                    @ control sort
    cmp r0,#1                                      @ sorted ?
    beq 2f                                    
    ldr r0,iAdrszMessSortNok                       @ no !! error sort
    bl affichageMess
    b 100f
2:                                                 @ yes
    ldr r0,iAdrszMessSortOk
    bl affichageMess
100:                                               @ standard end of the program 
    mov r0, #0                                     @ return code
    mov r7, #EXIT                                  @ request to exit program
    svc #0                                         @ perform the system call
 
iAdrszCarriageReturn:     .int szCarriageReturn
iAdrsMessResult:          .int sMessResult
iAdrTableNumber:          .int TableNumber
iAdrszMessSortOk:         .int szMessSortOk
iAdrszMessSortNok:        .int szMessSortNok
/******************************************************************/
/*     control sorted table                                   */ 
/******************************************************************/
/* r0 contains the address of table */
/* r1 contains the number of elements  > 0  */
/* r0 return 0  if not sorted   1  if sorted */
isSorted:
    push {r2-r4,lr}                                    @ save registers
    mov r2,#0
    ldr r4,[r0,r2,lsl #2]
1:
    add r2,#1
    cmp r2,r1
    movge r0,#1
    bge 100f
    ldr r3,[r0,r2, lsl #2]
    cmp r3,r4
    movlt r0,#0
    blt 100f
    mov r4,r3
    b 1b
100:
    pop {r2-r4,lr}
    bx lr                                              @ return 
/******************************************************************/
/*         bubble sort                                              */ 
/******************************************************************/
/* r0 contains the address of table */
/* r1 contains the first element    */
/* r2 contains the number of element */
bubbleSort:
    push {r1-r9,lr}           @ save registers
    sub r2,r2,#1              @ compute i = n - 1
    add r8,r1,#1
1:                            @ start loop 1
    mov r3,r1                 @ start index
    mov r9,#0
    sub r7,r2,#1
2:                            @ start loop 2
    add r4,r3,#1
    ldr r5,[r0,r3,lsl #2]     @ load value A[j]
    ldr r6,[r0,r4,lsl #2]     @ load value A[j+1]
    cmp r6,r5                 @ compare value
    strlt r6,[r0,r3,lsl #2]   @ if smaller inversion
    strlt r5,[r0,r4,lsl #2] 
    movlt r9,#1               @ top table not sorted
    add r3,#1                 @ increment index j
    cmp r3,r7                 @ end ?
    ble 2b                    @ no -> loop 2
    cmp r9,#0                 @ table sorted ?
    beq 100f                  @ yes -> end

    sub r2,r2,#1              @ decrement i
    cmp r2,r8                 @ end ?
    bge 1b                    @ no -> loop 1
 
100:
    pop {r1-r9,lr}
    bx lr                                                  @ return 
 
/******************************************************************/
/*      Display table elements                                */ 
/******************************************************************/
/* r0 contains the address of table */
displayTable:
    push {r0-r3,lr}                                    @ save registers
    mov r2,r0                                          @ table address
    mov r3,#0
1:                                                     @ loop display table
    ldr r0,[r2,r3,lsl #2]
    ldr r1,iAdrsZoneConv                               @ 
    bl conversion10                                    @ décimal conversion 
    ldr r0,iAdrsMessResult
    ldr r1,iAdrsZoneConv                               @ insert conversion
    bl strInsertAtCharInc
    bl affichageMess                                   @ display message
    add r3,#1
    cmp r3,#NBELEMENTS - 1
    ble 1b
    ldr r0,iAdrszCarriageReturn
    bl affichageMess
100:
    pop {r0-r3,lr}
    bx lr
iAdrsZoneConv:           .int sZoneConv
/***************************************************/
/*      ROUTINES INCLUDE                           */
/***************************************************/
.include "../affichage.inc"

Arturo

bubbleSort: function [items][
    len: size items
    loop len [j][
        i: 1
        while [i =< len-j] [
            if items\[i] < items\[i-1] [
                tmp: items\[i]
                items\[i]: items\[i-1]
                items\[i-1]: tmp
            ]
            i: i + 1
        ]
    ]
    items
]

print bubbleSort [3 1 2 8 5 7 9 4 6]
Output:
1 2 3 4 5 6 7 8 9

AutoHotkey

var = 
(
dog
cat
pile
abc
)
MsgBox % bubblesort(var)

bubblesort(var) ; each line of var is an element of the array
{ 
  StringSplit, array, var, `n
  hasChanged = 1
  size := array0
  While hasChanged
  {
    hasChanged = 0
    Loop, % (size - 1)
    {
      i := array%A_Index%
      aj := A_Index + 1
      j := array%aj%
      If (j < i)
      {
        temp := array%A_Index%
        array%A_Index% := array%aj%
        array%aj% := temp
        hasChanged = 1
      } 
    }
  }
  Loop, % size
    sorted .= array%A_Index% . "`n"
  Return sorted
}

AWK

Sort the standard input and print it to standard output.

{ # read every line into an array
  line[NR] = $0
}
END { # sort it with bubble sort
  do {
    haschanged = 0
    for(i=1; i < NR; i++) {
      if ( line[i] > line[i+1] ) {
	t = line[i]
	line[i] = line[i+1]
	line[i+1] = t
	haschanged = 1
      }
    }
  } while ( haschanged == 1 )
  # print it
  for(i=1; i <= NR; i++) {
    print line[i]
  }
}

GNU awk contains built in functions for sorting, but POSIX Awk doesn't. Here is a generic bubble sort() implementation that you can copy/paste to your Awk programs. Adapted from the above example. Note that it is not possible to return arrays from Awk functions so the array is "edited in place". The extra parameters passed in function's argument list is a well known trick to define local variables.

# Test this example file from command line with:
#
#    awk -f file.awk /dev/null
#
# Code by Jari Aalto <jari.aalto A T cante net>
# Licensed and released under GPL-2+, see http://spdx.org/licenses

function alen(array,   dummy, len) {
    for (dummy in array)
        len++;

    return len;
}

function sort(array,   haschanged, len, tmp, i)
{
    len = alen(array)
    haschanged = 1

    while ( haschanged == 1 )
    {
        haschanged = 0

        for (i = 1; i <= len - 1; i++)
        {
            if (array[i] > array[i+1])
            {
                tmp = array[i]
                array[i] = array[i + 1]
                array[i + 1] = tmp
                haschanged = 1
            }
        }
    }
}

# An Example. Sorts array to order: b, c, z
{
    array[1] = "c"
    array[2] = "z"
    array[3] = "b"
    sort(array)
    print array[1] " " array[2] " " array[3]
    exit
}

bash

I hope to see vastly improved versions of bubble_sort.

$ function bubble_sort() {
    local a=("$@")
    local n
    local i
    local j
    local t
    ft=(false true)
    n=${#a[@]} # array length
    i=n
    while ${ft[$(( 0 < i ))]}
    do
        j=0
        while ${ft[$(( j+1 < i ))]}
        do
            if ${ft[$(( a[j+1] < a[j] ))]}
            then
    	        t=${a[j+1]}
    	        a[j+1]=${a[j]}
    	        a[j]=$t
    	    fi
            t=$(( ++j ))
        done
        t=$(( --i ))
    done
    echo ${a[@]}
}

> > > > > > > > > > > > > > > > > > > > > > > > > $ # this line output from bash
$ bubble_sort 3 2 8
2 3 8
$ # create an array variable
$ a=(2 45 83 89 1 82 69 88 112 99 0 82 58 65 782 74 -31 104 4 2)
$ bubble_sort ${a[@]}
-31 0 1 2 2 4 45 58 65 69 74 82 82 83 88 89 99 104 112 782
$ b=($( bubble_sort ${a[@]} ) )
$ echo ${#b[@]}
20
$ echo ${b[@]}
-31 0 1 2 2 4 45 58 65 69 74 82 82 83 88 89 99 104 112 782
$

BASIC

Applesoft BASIC

0 GOSUB 7 : IC = I%(0)
1 FOR HC = -1 TO 0
2     LET IC = IC - 1
3     FOR I = 1 TO IC
4         IF I%(I) > I%(I + 1) THEN H = I%(I) : I%(I) = I%(I + 1) : I%(I + 1) = H : HC = -2 * (IC > 1)
5 NEXT I, HC
6 GOSUB 9 : END
7 DIM I%(18000) : I%(0) = 50
8 FOR I = 1 TO I%(0) : I%(I) = INT (RND(1) * 65535) - 32767 : NEXT
9 FOR I = 1 TO I%(0) : PRINT I%(I)" "; : NEXT I : PRINT : RETURN

BaCon

Numeric example:

LOCAL t[] = { 5, 7, 1, 3, 10, 2, 9, 4, 8, 6 }
total = 10
WHILE total > 1
    FOR x = 0 TO total-1
        IF t[x] > t[x+1] THEN SWAP t[x], t[x+1]
    NEXT
    DECR total
WEND
PRINT COIL$(10, STR$(t[_-1]))
Output:
1 2 3 4 5 6 7 8 9 10

String example:

t$ = "Kiev Amsterdam Lima Moscow Warschau Vienna Paris Madrid Bonn Bern Rome"
total = AMOUNT(t$)
WHILE total > 1
    FOR x = 1 TO total-1
        IF TOKEN$(t$, x) > TOKEN$(t$, x+1) THEN t$ = EXCHANGE$(t$, x, x+1)
    NEXT
    DECR total
WEND
PRINT t$
Output:
Amsterdam Bern Bonn Kiev Lima Madrid Moscow Paris Rome Vienna Warschau

BASIC256

Works with: BASIC256
    
Dim a(11): ordered=false
print "Original set"
For n = 0 to 9
a[n]=int(rand*20+1)
print a[n]+", ";
next n
#algorithm
while ordered=false
   ordered=true
   For n = 0 to 9
      if a[n]> a[n+1] then
          x=a[n]
          a[n]=a[n+1]
          a[n+1]=x
          ordered=false
       end if
    next n
end while

print
print "Ordered set"
For n = 1 to 10
print a[n]+", ";
next n
Output:

(example)

Original set
2, 10, 17, 13, 20, 14, 3, 17, 16, 16, 
Ordered set
2, 3, 10, 13, 14, 16, 16, 17, 17, 20, 

BBC BASIC

The Bubble sort is very inefficient for 99% of cases. This routine uses a couple of 'tricks' to try and mitigate the inefficiency to a limited extent. Note that the array index is assumed to start at zero.

      DIM test(9)
      test() = 4, 65, 2, -31, 0, 99, 2, 83, 782, 1
      PROCbubblesort(test(), 10)
      FOR i% = 0 TO 9
        PRINT test(i%) ;
      NEXT
      PRINT
      END
      
      DEF PROCbubblesort(a(), n%)
      LOCAL i%, l%
      REPEAT
        l% = 0
        FOR i% = 1 TO n%-1
          IF a(i%-1) > a(i%) THEN
            SWAP a(i%-1),a(i%)
            l% = i%
          ENDIF
        NEXT
        n% = l%
      UNTIL l% = 0
      ENDPROC
Output:
       -31         0         1         2         2         4        65        83        99       782

Chipmunk Basic

The Commodore BASIC solution works without any changes.

Commodore BASIC

 5 REM ===============================================
10 REM HTTP://ROSETTACODE.ORG/
20 REM TASK=SORTING ALGORITHMS/BUBBLE SORT
30 REM LANGUAGE=COMMODORE 64 BASIC V2
40 REM DATE=2020-08-17
50 REM CODING BY=ALVALONGO
60 REM FILE=BUBLE.PRG
70 REM ============================================

100 PRINT "SORTING ALGORITHMS/BUBBLE SORT"
110 GOSUB 700
120 GOSUB 800
130 PRINT "RESULT:"
140 GOSUB 600
150 END

600 REM DISPLAY DATA================================
610 FOR K=1 TO N
620 PRINT A(K);
630 NEXT K
640 PRINT
650 RETURN

700 REM LOAD DATA ==================================
720 READ N
730 DIM A(N)
740 FOR I=1 TO N
750 READ A(I)
760 NEXT I
770 RETURN

800 REM BUBBLE SORT ================================
810 FOR I=1 TO N
815 PRINT "I=";I
820 GOSUB 600
830 SW=-1
840 FOR J=1 TO N-I
850 IF A(J)>A(J+1) THEN T=A(J):A(J)=A(J+1):A(J+1)=T:SW=0
860 NEXT J
865 PRINT "SW=";SW
870 IF SW THEN I=N
880 NEXT I
890 RETURN

900 REM DATA==========================================
910 DATA 15
920 DATA 64,34,25,12,22,11,90,13,59,47,19,89,10,17,31

Craft Basic

define sort = 0, index = 0, size = 10
define temp1 = 0, temp2 = 0

dim list[size]

gosub fill
gosub sort
gosub show

end

sub fill

	for index = 0 to size - 1

		let list[index] = int(rnd * 100)

	next index

return

sub sort

	do

		let sort = 0
		for index = 0 to size - 2

			let temp1 = index + 1

			if list[index] > list[temp1] then

				let temp2 = list[index]
				let list[index] = list[temp1]
				let list[temp1] = temp2
				let sort = 1

			endif

		next index

		wait

	loop sort = 1

return

sub show

	for index = 0 to size - 1

		print index ," : ", list[index]

	next index

return

FreeBASIC

Per task pseudo code:

' version 21-10-2016
' compile with: fbc -s console
' for boundry checks on array's compile with: fbc -s console -exx

Sub bubblesort(bs() As Long)
    ' sort from lower bound to the highter bound
    ' array's can have subscript range from -2147483648 to +2147483647
    Dim As Long lb = LBound(bs)
    Dim As Long ub = UBound(bs)
    Dim As Long done, i

    Do
        done = 0
        For i = lb To ub -1
            ' replace "<" with ">" for downwards sort
            If bs(i) > bs(i +1) Then
                Swap bs(i), bs(i +1)
                done = 1
            End If
        Next
    Loop Until done = 0

End Sub

' ------=< MAIN >=------

Dim As Long i, array(-7 To 7)

Dim As Long a = LBound(array), b = UBound(array)

Randomize Timer
For i = a To b : array(i) = i  : Next
For i = a To b ' little shuffle
    Swap array(i), array(Int(Rnd * (b - a +1)) + a)
Next

Print "unsort ";
For i = a To b : Print Using "####"; array(i); : Next : Print
bubblesort(array())  ' sort the array
Print "  sort ";
For i = a To b : Print Using "####"; array(i); : Next : Print

' empty keyboard buffer
While InKey <> "" : Wend
Print : Print "hit any key to end program"
Sleep
End
Output:
unsort   -7   3  -4  -6   4  -1  -2   2   7   0   5   1  -3  -5   6
  sort   -7  -6  -5  -4  -3  -2  -1   0   1   2   3   4   5   6   7

FTCBASIC

rem bubble sort benchmark example
rem compile with FTCBASIC

use time.inc
use random.inc

define const size = 32000

dim list[size]

define sorting = 0, index = 0, elements = 0
define timestamp = 0, sorttime = 0
define temp1 = 0, temp2 = 0

cls

print "Bubble sort benchmark test"

do

	print "How many elements to generate and sort (max " \
	print size \
	print ")? " \

	input elements

loop elements > size

gosub fill
gosub sort

print "done!"
print "sort time: " \
print sorttime
print "Press any key to view sorted data..."

pause

gosub output

pause
end

sub fill

	print "filling..."

	0 index

	do

		gosub generaterand

		let @list[index] = rand

		+1 index

	loop index < elements

return

sub sort

	print "sorting..."

	gosub systemtime
	let timestamp = loworder

	do

		0 sorting

		0 index

		do

			let temp1 = index + 1

			if @list[index] > @list[temp1] then

				let temp2 = @list[index]

				let @list[index] = @list[temp1]
				let @list[temp1] = temp2

				let sorting = 1

			endif

			+1 index

		loop index < elements - 1

	loop sorting = 1

	gosub systemtime
	let sorttime = ( loworder - timestamp ) / 18

return

sub output

	print "printing..."

	0 index

	do

		print @list[index]

		+1 index

	loop index < elements

return

FutureBasic

Bubble sorting is purely an academic exercise since there are much more efficient native sorting functions in FB.

include "NSLog.incl"

local fn BubbleSort( array as CFMutableArrayRef ) as CFArrayRef
  NSUInteger i, x, y, count = len(array)
  BOOL       swapped = YES
  
  while (swapped)
    swapped = NO
    for i = 1 to count -1
      x = fn NumberIntegerValue( array[i-1] )
      y = fn NumberIntegerValue( array[i]   )
      if ( x > y )
        MutableArrayExchangeObjects( array, (i-1), i )
        swapped = YES
      end if
    next
  wend
end fn = array

CFMutableArrayRef array
CFArrayRef        unsortedArray, sortedArray
NSUInteger        i

array = fn MutableArrayWithCapacity(0)
for i = 0 to 20
  MutableArrayAddObject( array, fn NumberWithInteger( rnd(100) ) )
next

unsortedArray = fn ArrayWithArray( array )
sortedArray   = fn BubbleSort( array )

NSLog( @"\n-----------------\nUnsorted : Sorted\n-----------------" )
for i = 0 to 20
  NSLog( @"%8ld : %-8ld", fn NumberIntegerValue( unsortedArray[i] ), fn NumberIntegerValue( sortedArray[i] ) )
next

randomize

HandleEvents
Output:
-----------------
Unsorted : Sorted
-----------------
      97 : 7       
      91 : 8       
      13 : 13      
      39 : 17      
      50 : 20      
      48 : 28      
       7 : 28      
      61 : 30      
      30 : 30      
      20 : 33      
      69 : 39      
      86 : 42      
      33 : 48      
      65 : 50      
      28 : 50      
      50 : 61      
      28 : 65      
       8 : 69      
      17 : 86      
      42 : 91      
      30 : 97 

Gambas

Click this link to run this code

Public Sub Main()
Dim byToSort As Byte[] = [249, 28, 111, 36, 171, 98, 29, 448, 44, 147, 154, 46, 102, 183, 24, 
                          120, 19, 123, 2, 17, 226, 11, 211, 25, 191, 205, 77]
Dim byCount As Byte
Dim bSorting As Boolean

Print "To sort: -"
ShowWorking(byToSort)
Print
Repeat
  bSorting = False
  For byCount = 0 To byToSort.Max - 1
    If byToSort[byCount] > byToSort[byCount + 1] Then
      Swap byToSort[byCount], byToSort[byCount + 1]
      bSorting = True
    Endif
  Next
  If bSorting Then ShowWorking(byToSort)
Until bSorting = False
End
'-----------------------------------------
Public Sub ShowWorking(byToSort As Byte[])
Dim byCount As Byte

For byCount = 0 To byToSort.Max
  Print Str(byToSort[byCount]);
  If byCount <> byToSort.Max Then Print ",";
Next

Print

End

Output:

To sort: -
249,28,111,36,171,98,29,192,44,147,154,46,102,183,24,120,19,123,2,17,226,11,211,25,191,205,77

28,111,36,171,98,29,192,44,147,154,46,102,183,24,120,19,123,2,17,226,11,211,25,191,205,77,249
28,36,111,98,29,171,44,147,154,46,102,183,24,120,19,123,2,17,192,11,211,25,191,205,77,226,249
28,36,98,29,111,44,147,154,46,102,171,24,120,19,123,2,17,183,11,192,25,191,205,77,211,226,249
28,36,29,98,44,111,147,46,102,154,24,120,19,123,2,17,171,11,183,25,191,192,77,205,211,226,249
28,29,36,44,98,111,46,102,147,24,120,19,123,2,17,154,11,171,25,183,191,77,192,205,211,226,249
28,29,36,44,98,46,102,111,24,120,19,123,2,17,147,11,154,25,171,183,77,191,192,205,211,226,249
28,29,36,44,46,98,102,24,111,19,120,2,17,123,11,147,25,154,171,77,183,191,192,205,211,226,249
28,29,36,44,46,98,24,102,19,111,2,17,120,11,123,25,147,154,77,171,183,191,192,205,211,226,249
28,29,36,44,46,24,98,19,102,2,17,111,11,120,25,123,147,77,154,171,183,191,192,205,211,226,249
28,29,36,44,24,46,19,98,2,17,102,11,111,25,120,123,77,147,154,171,183,191,192,205,211,226,249
28,29,36,24,44,19,46,2,17,98,11,102,25,111,120,77,123,147,154,171,183,191,192,205,211,226,249
28,29,24,36,19,44,2,17,46,11,98,25,102,111,77,120,123,147,154,171,183,191,192,205,211,226,249
28,24,29,19,36,2,17,44,11,46,25,98,102,77,111,120,123,147,154,171,183,191,192,205,211,226,249
24,28,19,29,2,17,36,11,44,25,46,98,77,102,111,120,123,147,154,171,183,191,192,205,211,226,249
24,19,28,2,17,29,11,36,25,44,46,77,98,102,111,120,123,147,154,171,183,191,192,205,211,226,249
19,24,2,17,28,11,29,25,36,44,46,77,98,102,111,120,123,147,154,171,183,191,192,205,211,226,249
19,2,17,24,11,28,25,29,36,44,46,77,98,102,111,120,123,147,154,171,183,191,192,205,211,226,249
2,17,19,11,24,25,28,29,36,44,46,77,98,102,111,120,123,147,154,171,183,191,192,205,211,226,249
2,17,11,19,24,25,28,29,36,44,46,77,98,102,111,120,123,147,154,171,183,191,192,205,211,226,249
2,11,17,19,24,25,28,29,36,44,46,77,98,102,111,120,123,147,154,171,183,191,192,205,211,226,249

GW-BASIC

10 REM GENERATE A RANDOM BUNCH OF INTEGERS
20 DIM ARR(20)
30 RANDOMIZE TIMER
40 FOR I=0 TO 19
50 ARR(I)=INT(RND*100)
60 NEXT I
70 REM bubble sort the list, printing it at the end of every pass
80 MX = 19
90 CHANGED = 0
100 FOR I = 0 TO 19
110 PRINT ARR(I);
120 NEXT I
130 PRINT
140 FOR I = 0 TO MX-1
150 IF ARR(I)>ARR(I+1) THEN GOSUB 1000
160 NEXT I
170 MX = MX - 1
180 IF CHANGED*MX = 0 THEN END
190 GOTO 90
1000 TEMP = ARR(I)
1010 ARR(I) = ARR(I+1)
1020 ARR(I+1) = TEMP
1030 CHANGED = 1
1040 RETURN
Output:

20  59  42  9  5  91  6  64  21  28  65  96  20  66  66  70  91  98  63  31 
20  42  9  5  59  6  64  21  28  65  91  20  66  66  70  91  96  63  31  98 
20  9  5  42  6  59  21  28  64  65  20  66  66  70  91  91  63  31  96  98 
9  5  20  6  42  21  28  59  64  20  65  66  66  70  91  63  31  91  96  98 
5  9  6  20  21  28  42  59  20  64  65  66  66  70  63  31  91  91  96  98 
5  6  9  20  21  28  42  20  59  64  65  66  66  63  31  70  91  91  96  98 
5  6  9  20  21  28  20  42  59  64  65  66  63  31  66  70  91  91  96  98 
5  6  9  20  21  20  28  42  59  64  65  63  31  66  66  70  91  91  96  98 
5  6  9  20  20  21  28  42  59  64  63  31  65  66  66  70  91  91  96  98 
5  6  9  20  20  21  28  42  59  63  31  64  65  66  66  70  91  91  96  98 
5  6  9  20  20  21  28  42  59  31  63  64  65  66  66  70  91  91  96  98 
5  6  9  20  20  21  28  42  31  59  63  64  65  66  66  70  91  91  96  98 
5  6  9  20  20  21  28  31  42  59  63  64  65  66  66  70  91  91  96  98

IS-BASIC

100 PROGRAM "BubblSrt.bas"
110 RANDOMIZE 
120 NUMERIC ARRAY(-5 TO 9)
130 CALL INIT(ARRAY)
140 CALL WRITE(ARRAY)
150 CALL BUBBLESORT(ARRAY)
160 CALL WRITE(ARRAY)
170 DEF INIT(REF A)
180   FOR I=LBOUND(A) TO UBOUND(A)
190     LET A(I)=RND(98)+1
200   NEXT
210 END DEF
220 DEF WRITE(REF A)
230   FOR I=LBOUND(A) TO UBOUND(A)
240     PRINT A(I);
250   NEXT
260   PRINT
270 END DEF
280 DEF BUBBLESORT(REF A)
290   DO
300     LET CH=0
310     FOR I=LBOUND(A) TO UBOUND(A)-1
320       IF A(I)>A(I+1) THEN LET T=A(I):LET A(I)=A(I+1):LET A(I+1)=T:LET CH=1
330     NEXT
340   LOOP WHILE CH
350 END DEF

Liberty BASIC

Works with: Just BASIC
itemCount = 20
dim item(itemCount)
for i = 1 to itemCount
    item(i) = int(rnd(1) * 100)
next i
print "Before Sort"
for i = 1 to itemCount
    print item(i)
next i
print: print
counter = itemCount
do
    hasChanged = 0
    for i = 1 to counter - 1
        if item(i) > item(i + 1) then
            temp = item(i)
            item(i) = item(i + 1)
            item(i + 1) = temp
            hasChanged = 1
        end if
    next i
    counter =counter -1
loop while hasChanged = 1
print "After Sort"
for i = 1 to itemCount
    print item(i)
next i
end

microA BASIC

Works with: microA
'bubble sort in micro(A) BASIC
wcolor 0,0,0 : fcolor 150,180,240
var start,endtime,time
var sort,index,size,temp1,temp2,x,xl,y
size = 1000 : x = 10 : y = 20  : xl = 40
var list[size]
index = 1
GETTICK start
'---------------------------------------------
label do1
	list[index] = rand(100)
	index = index + 1
if index < size : goto do1 : endif
'---------------------------------------------
label do2
	sort = 0
	index = 1
label do3
'---------------------------------------------
		temp1 = index + 1
		if list[index] > list[temp1] 
			temp2 = list[index]
			list[index] = list[temp1]
			list[temp1] = temp2
			sort = 1
		endif
		index = index + 1
	if index < size - 1 : goto do3 : endif
'-----------------------------------------------
if sort = 1 : goto do2 : endif  
'-----------------------------------------------
index = 1
GETTICK endtime
time = (endTime - start) / 1000
fcolor 230,140,120: print 300,10,time : swap 
index = 970
'check sort /////////////////////////////////////
label do4
	print x,y ,index  : print xl,y, list[index]
     y = y + 20 : swap
	index = index + 1
     swap
if  index < 1000 : goto do4 :endif
'////////////////////////////////////////////////

Minimal BASIC

Translation of: QuickBASIC
Works with: Bywater BASIC version 2.61
100 REM Sorting algorithms/Bubble sort
110 REM Prepare data
120 REM N - size; A - array of nums
130 LET N = 10
140 OPTION BASE 1
150 DIM A(10)
160 RANDOMIZE
170 PRINT "Before: ";
180 FOR I = 1 TO N
190  LET A(I) = INT(RND*100)
200  PRINT A(I);
210 NEXT I
220 PRINT
230 REM Sort
240 REM C - counter; H - has changed
250 LET C = N
260  LET H = 0
270  FOR I = 1 TO C-1
280   IF A(I) <= A(I+1) THEN 330
290    LET T = A(I)
300    LET A(I) = A(I+1)
310    LET A(I+1) = T
320    LET H = 1
330  NEXT I
340  LET C = C-1
350 IF H = 1 THEN 260
360 REM Display result
370 PRINT "After: ";
380 FOR I = 1 TO N
390  PRINT A(I);
400 NEXT I
410 PRINT
420 END

PureBasic

Procedure bubbleSort(Array a(1))
  Protected i, itemCount, hasChanged
  
  itemCount = ArraySize(a())
  Repeat
    hasChanged = #False
    itemCount - 1
    For i = 0 To itemCount
      If a(i) > a(i + 1)
        Swap a(i), a(i + 1)
        hasChanged = #True
      EndIf 
    Next  
  Until hasChanged = #False
EndProcedure

QuickBASIC

Works with: QBasic version 1.1
Works with: QuickBasic version 4.5
' Sorting algorithms/Bubble sort
' Prepare data
size = 10
OPTION BASE 1
DIM nums(size)
RANDOMIZE TIMER
PRINT "Before:";
FOR I = 1 TO size
  nums(I) = INT(RND * 100)
  PRINT USING " ##"; nums(I);
NEXT I
PRINT

' Sort
counter = size
DO
  changed = 0
  FOR I = 1 TO counter - 1
    IF nums(I) > nums(I + 1) THEN
      tmp = nums(I)
      nums(I) = nums(I + 1)
      nums(I + 1) = tmp
      changed = 1
    END IF
  NEXT I
  counter = counter - 1
LOOP WHILE (changed)

' Display result
PRINT "After: ";
FOR I = 1 TO 10
  PRINT USING " ##"; nums(I);
NEXT I
PRINT
END
Output:

(2 samples)

Before: 91 97  3 62 17 48 89  7  2 66
After:   2  3  7 17 48 62 66 89 91 97
Before: 22 60 45 44 54 93 84 27 21 64
After:  21 22 27 44 45 54 60 64 84 93

Quite BASIC

100 rem Sorting algorithms/Bubble sort
110 LET n = 10
120 array a
130 GOSUB 310
140 PRINT "unsort  ";
150 GOSUB 360
160 rem Sort the array
170 GOSUB 210
180 PRINT "  sort  ";
190 GOSUB 360
200 END
210 rem Bubble sort the list A of length N
220 FOR i = 1 TO n-1
230  FOR j = 1 TO n-i
240   IF a[j] <= a[j+1] THEN GOTO 280
250   LET x = a[j]
260   LET a[j] = a[j+1]
270   LET a[j+1] = x
280  NEXT j
290 NEXT i
300 RETURN
310 rem Create a RANDOM list of N integers
320 FOR i = 1 TO n
330  LET a[i] = FLOOR(RAND(100))
340 NEXT i
350 RETURN
360 rem Print the list a
370 FOR i = 1 TO n
380  PRINT a[i];" ";
390 NEXT i
400 PRINT
410 RETURN
Output:
unsort  19 78 39 54 63 68 66 52 94 2 
  sort  2 19 39 52 54 63 66 68 78 94 

RapidQ

Translation of: QuickBASIC
' Sorting algorithms/Bubble sort
' Prepare data
size = 10
DIM nums(1 TO size)
RANDOMIZE TIMER
PRINT "Before:";
FOR I = 1 TO size
  nums(I) = INT(RND * 100)
  PRINT FORMAT$(" %2d", nums(I));
NEXT I
PRINT

' Sort
counter = size
DO
  changed = 0
  FOR I = 1 TO counter - 1
    IF nums(I) > nums(I + 1) THEN
      tmp = nums(I)
      nums(I) = nums(I + 1)
      nums(I + 1) = tmp
      changed = -1
    END IF
  NEXT I
  counter = counter - 1
LOOP UNTIL NOT changed

' Display result
PRINT "After: ";
FOR I = 1 TO 10
  PRINT FORMAT$(" %2d", nums(I));
NEXT I
PRINT
END
Output:

(2 samples)

Before: 82 34 57 44 48 71 19 33 73 62
After:  19 33 34 44 48 57 62 71 73 82
Before:  4 15 96 93 27 24  9 80 10 21
After:   4  9 10 15 21 24 27 80 93 96

REALbasic

Sorts an array of Integers.

  Dim sortable() As Integer = Array(1, 2, 3, 4, 5, 6, 7, 8, 9, 10)
  sortable.Shuffle() ' sortable is now randomized
  Dim swapped As Boolean
  Do
    Dim index, bound As Integer
    bound = sortable.Ubound

    While index < bound
      If sortable(index) > sortable(index + 1) Then
        Dim s As Integer = sortable(index)
        sortable.Remove(index)
        sortable.Insert(index + 1, s)
        swapped = True
      End If
      index = index + 1
    Wend
    
  Loop Until Not swapped
'sortable is now sorted

Run BASIC

Works with: QBasic version 1.1
Works with: Just BASIC
siz = 100
dim data$(siz)
unSorted = 1

WHILE unSorted
  unSorted = 0
  FOR i = 1 TO siz -1
    IF data$(i) > data$(i +1) THEN
      tmp$      = data$(i)
      data$(i)  = data$(i +1)
      data$(i + 1) = tmp$
      unSorted  = 1
    END IF
  NEXT
WEND

Sinclair ZX81 BASIC

Works with the 1k RAM model. For simplicity, and to make it easy to animate the sort as it is going on, this implementation sorts a string of eight-bit unsigned integers which can be treated as character codes; it could easily be amended to sort an array of numbers or an array of strings, but the array would need to be dimensioned at the start.

 10 LET S$="FIRE BURN AND CAULDRON BUBBLE"
 20 PRINT S$
 30 LET L=LEN S$-1
 40 LET C=0
 50 FOR I=1 TO L
 60 IF S$(I)<=S$(I+1) THEN GOTO 120
 70 LET T$=S$(I)
 80 LET S$(I)=S$(I+1)
 90 LET S$(I+1)=T$
100 PRINT AT 0,I-1;S$(I TO I+1)
110 LET C=1
120 NEXT I
130 LET L=L-1
140 IF C THEN GOTO 40
Output:
    AABBBBCDDEEFILLNNNORRRUUU

TI-83 BASIC

Input your data into L1 and run this program to organize it.

:L1→L2
:1+dim(L2)→N
:For(D,1,dim(L2))
:N-1→N
:0→I
:For(C,1,dim(L2)-2)
:For(A,dim(L2)-N+1,dim(L2)-1)
:If L2(A)>L2(A+1)
:Then
:1→I
:L2(A)→B
:L2(A+1)→L2(A)
:B→L2(A+1)
:End
:End
:End
:If I=0
:Goto C
:End
:Lbl C
:If L2(1)>L2(2)
:Then
:L2(1)→B
:L2(2)→L2(1)
:B→L2(2)
:End
:DelVar A
:DelVar B
:DelVar C
:DelVar D
:DelVar N
:DelVar I
:Return

Odd-Even Bubble Sort (same IO):

:"ODD-EVEN"
:L1→L2(
:1+dim(L2)→N
:For(D,1,dim(L2))
:N-1→N
:0→O
:For(C,1,dim(L2)-2)
:For(A,dim(L2)-N+2,dim(L2)-1,2)
:If L2(A)>L2(A+1)
:Then
:1→O
:L2(A)→B
:L2(A+1)→L2(A)
:B→L2(A+1)
:End
:End
:For(A,dim(L2)-N+1,dim(L2)-1,2)
:If L2(A)>L2(A+1)
:Then
:1→O
:L2(A)→B
:L2(A+1)→L2(A)
:B→L2(A+1)
:End
:End
:End
:If O=0
:Goto C
:End
:Lbl C
:If L2(1)>L2(2)
:Then
:L2(1)→B
:L2(2)→L2(1)
:B→L2(2)
:End
:DelVar A
:DelVar B
:DelVar C
:DelVar D
:DelVar N
:DelVar O
:Return

Implementation of the pseudo code given at the top of the page. Place data to be sorted in L1

:dim(L1)→D
:Repeat C=0
  :0→C
  :D–1→D
  :For(I,1,D)
    :If L1(I)>L1(I+1):Then
      :L1(I)→C
      :L1(I+1)→L1(I)
      :C→L1(I+1)
      :1→C
    :End
  :End
:End
:L1

True BASIC

OPTION BASE 1
LET size = 10
DIM nums(0)
MAT REDIM nums(size)
RANDOMIZE
PRINT "Before:";
FOR i = 1 TO size
    LET nums(i) = INT(RND*100)
    PRINT  USING " ##": nums(i);
NEXT i
PRINT

! Sort
LET counter = size
DO
   LET changed = 0
   FOR i = 1 TO counter-1
       IF nums(i) > nums(i+1) THEN
          LET tmp = nums(i)
          LET nums(i) = nums(i+1)
          LET nums(i+1) = tmp
          LET changed = 1
       END IF
   NEXT i
   LET counter = counter-1
LOOP WHILE (changed<>0)

! Display result
PRINT "After: ";
FOR i = 1 TO 10
    PRINT  USING " ##": nums(i);
NEXT i
PRINT
END
Output:
Similar as QuickBASIC entry.

uBasic/4tH

PRINT "Bubble sort:"
  n = FUNC (_InitArray)
  PROC _ShowArray (n)
  PROC _Bubblesort (n)
  PROC _ShowArray (n)
PRINT
 
END
 
_Bubblesort PARAM(1)                   ' Bubble sort
  LOCAL (2)

  DO
    b@ = 0
    FOR c@ = 1 TO a@-1
      IF @(c@-1) > @(c@) THEN PROC _Swap (c@, c@-1) : b@ = c@
    NEXT
    a@ = b@
    UNTIL b@ = 0
  LOOP

RETURN
 
 
_Swap PARAM(2)                         ' Swap two array elements
  PUSH @(a@)
  @(a@) = @(b@)
  @(b@) = POP()
RETURN
 
 
_InitArray                             ' Init example array
  PUSH 4, 65, 2, -31, 0, 99, 2, 83, 782, 1
 
  FOR i = 0 TO 9
    @(i) = POP()
  NEXT
 
RETURN (i)
 
 
_ShowArray PARAM (1)                   ' Show array subroutine
  FOR i = 0 TO a@-1
    PRINT @(i),
  NEXT
 
  PRINT
RETURN

VBA

Translation of: Phix
Private Function bubble_sort(s As Variant) As Variant
    Dim tmp As Variant
    Dim changed As Boolean
    For j = UBound(s) To 1 Step -1
        changed = False
        For i = 1 To j - 1
            If s(i) > s(i + 1) Then
                tmp = s(i)
                s(i) = s(i + 1)
                s(i + 1) = tmp
                changed = True
            End If
        Next i
        If Not changed Then
            Exit For
        End If
    Next j
    bubble_sort = s
End Function
 
Public Sub main()
    s = [{4, 15, "delta", 2, -31, 0, "alfa", 19, "gamma", 2, 13, "beta", 782, 1}]
    Debug.Print "Before: "
    Debug.Print Join(s, ", ")
    Debug.Print "After: "
    Debug.Print Join(bubble_sort(s), ", ")
End Sub
Output:
Before: 
4, 15, delta, 2, -31, 0, alfa, 19, gamma, 2, 13, beta, 782, 1
After: 
-31, 0, 1, 2, 2, 4, 13, 15, 19, 782, alfa, beta, delta, gamma

VBScript

Doing the decr and incr thing is superfluous, really. I just had stumbled over the byref thing for swap and wanted to see where else it would work.

For those unfamiliar with Perth, WA Australia, the five strings being sorted are names of highways.

Implementation
sub decr( byref n )
	n = n - 1
end sub

sub incr( byref n )
	n = n + 1
end sub

sub swap( byref a, byref b)
	dim tmp
	tmp = a
	a = b
	b = tmp
end sub

function bubbleSort( a )
	dim changed
	dim itemCount
	itemCount = ubound(a) 
	do
		changed = false
		decr itemCount
		for i = 0 to itemCount
			if a(i) > a(i+1) then
				swap a(i), a(i+1)
				changed = true
			end if
		next
	loop until not changed
	bubbleSort = a
end function
Invocation
dim a
a = array( "great eastern", "roe", "stirling", "albany", "leach")
wscript.echo join(a,", ")
bubbleSort a
wscript.echo join(a,", ")
Output:
great eastern, roe, stirling, albany, leach
albany, great eastern, leach, roe, stirling

Visual Basic .NET

Platform: .NET

Works with: Visual Basic .NET version 9.0+
Do Until NoMoreSwaps = True
     NoMoreSwaps = True
     For Counter = 1 To (NumberOfItems - 1)
         If List(Counter) > List(Counter + 1) Then
             NoMoreSwaps = False
             Temp = List(Counter)
             List(Counter) = List(Counter + 1)
             List(Counter + 1) = Temp
         End If
     Next
     NumberOfItems = NumberOfItems - 1
Loop

Yabasic

// Animated sort.
// Original idea by William Tang, obtained from MicroHobby 25 Years (https://microhobby.speccy.cz/zxsf/MH-25Years.pdf)

clear screen

n=15 : m=18 : y=9 : t$=chr$(17)+chr$(205)+chr$(205)
dim p(n), p$(n)

for x=1 TO n
    p(x)=ran(15)+1
    p$(x)=str$(p(x),"##.######")
    print at(0,x) p$(x)
next x

for j=1 to n-1
    for i=j+1 to n
        l=n+j-i+1
        if p(j) > p(l) then
            print color("yellow","red") at(0,j) p$(j)
            if l<>m then 
                for x=m to l step sig(l-m): print at(18,x) t$ : print at (18,x+sig(m-l)) "   " : pause .02 : next x
            end if
            for x=17 TO y step -1 : print at(x,l) t$+" " : pause .02 : next x
            for x=0 TO 10 : print at(x,l) " "+p$(l)+t$ : pause .02 : next x
            for x=l TO j STEP -1 : print at(11,x) p$(l)+t$ : print at(11,x+1) "            " : pause .02 : next x
            print at(0,j) "            "
            for x=j+1 TO l-1 : print color("yellow","red") at(0,x) p$(j) : pause .02 : print at(0,x) p$(x) : pause .02 : next x
            print at(0,l) p$(j)
            for x=10 TO 0 step -1 : print at(x,j) p$(l)+t$+" " : pause .02 : next x
            for x=y TO 17 : print at(x,j) " "+t$ : pause .02 : next x
            m=j
            t=p(l) : tem$=p$(l)
            p(l)=p(j) : p$(l)=p$(j)
            p(j)=t : p$(j)=tem$
        end if
        pause .02
    next i
next j

for x=m TO 18 : print at(18,x-1) "   " : print at(18,x) t$ : pause .02 : next x

ZX Spectrum Basic

5000 CLS 
5002 LET a$="": FOR f=1 TO 64: LET a$=a$+CHR$ (32+INT (RND*96)): NEXT f
5004 PRINT a$; AT 10,0;"ZigZag BubbleSORT"
5010 LET la=LEN a$
5011 LET i=1: LET u=0
5020 LET d=0: LET p=(u=0)-(u=1)
5021 LET l=(i AND u=0)+(la-i+u AND u=1)
5030 IF u=0 THEN  IF a$(l+1)>=a$(l) THEN  GO TO 5050
5031 IF u=1 THEN  IF a$(l-1)<=a$(l) THEN  GO TO 5050
5040 LET d=1
5042 LET t$=a$(l+p)
5043 LET a$(l+p)=a$(l)
5044 LET a$(l)=t$
5050 LET l=l+p
5051 PRINT AT 10,21;a$(l);AT 12,0;a$
5055 IF l<=la-i AND l>=i THEN  GO TO 5023
5061 LET i=i+NOT u
5063 LET u=NOT u
5064 IF d AND i<la THEN  GO TO 5020
5072 PRINT AT 12,0;a$
9000 STOP

The traditional solution:

  10 LET siz=32
  20 DIM d$(siz)
  30 REM Populate d$
  40 FOR n=1 TO siz: LET d$(n)=CHR$ (48+INT (RND*75)): NEXT n
  50 PRINT d$
  60 LET unSorted=0
  70 FOR i=1 TO siz-1
  80 IF d$(i)>d$(i+1) THEN LET t$=d$(i): LET d$(i)=d$(i+1): LET d$(i+1)=t$: LET unSorted=1
  90 NEXT i
 100 IF unSorted THEN LET siz=siz-1: GO TO 60
 110 PRINT d$

BCPL

get "libhdr"

let bubblesort(v, length) be
$(  let sorted = false
    until sorted
    $(  sorted := true
        length := length - 1
        for i=0 to length-1
            if v!i > v!(i+1)
            $(  let x = v!i
                v!i := v!(i+1)
                v!(i+1) := x
                sorted := false
            $)
    $)
$)

let start() be
$(  let v = table 10,8,6,4,2,1,3,5,7,9
    bubblesort(v, 10)
    for i=0 to 9 do writef("%N ", v!i)
    wrch('*N')
$)
Output:
1 2 3 4 5 6 7 8 9 10

Befunge

000p&:   v                    >20g:7g\1+7g2v                                       
v00p7g00 _10p0>20p20g:7g\1+7g`|0p7+1g02p7g0<                                       
>g1+00p&:^    |-\g00:+1g02    <                                                    
         0    >$10gv                                                               
         |-\g00:+1 <                                                               
         >1->:7g\:#v_$>:#._25*,@                                                   
         ^         <

C

#include <stdio.h>

void bubble_sort (int *a, int n) {
    int i, t, j = n, s = 1;
    while (s) {
        s = 0;
        for (i = 1; i < j; i++) {
            if (a[i] < a[i - 1]) {
                t = a[i];
                a[i] = a[i - 1];
                a[i - 1] = t;
                s = 1;
            }
        }
        j--;
    }
}

int main () {
    int a[] = {4, 65, 2, -31, 0, 99, 2, 83, 782, 1};
    int n = sizeof a / sizeof a[0];
    int i;
    for (i = 0; i < n; i++)
        printf("%d%s", a[i], i == n - 1 ? "\n" : " ");
    bubble_sort(a, n);
    for (i = 0; i < n; i++)
        printf("%d%s", a[i], i == n - 1 ? "\n" : " ");
    return 0;
}
Output:
4 65 2 -31 0 99 2 83 782 1
-31 0 1 2 2 4 65 83 99 782

C#

Works with: C# version 3.0+
using System;
using System.Collections.Generic;

namespace RosettaCode.BubbleSort
{
    public static class BubbleSortMethods
    {
        //The "this" keyword before the method parameter identifies this as a C# extension
        //method, which can be called using instance method syntax on any generic list,
        //without having to modify the generic List<T> code provided by the .NET framework.
        public static void BubbleSort<T>(this List<T> list) where T : IComparable
        {
            bool madeChanges;
            int itemCount = list.Count;
            do
            {
                madeChanges = false;
                itemCount--;
                for (int i = 0; i < itemCount; i++)
                {
                    if (list[i].CompareTo(list[i + 1]) > 0)
                    {
                        T temp = list[i + 1];
                        list[i + 1] = list[i];
                        list[i] = temp;
                        madeChanges = true;
                    }
                }
            } while (madeChanges);
        }
    }

    //A short test program to demonstrate the BubbleSort. The compiler will change the
    //call to testList.BubbleSort() into one to BubbleSortMethods.BubbleSort<T>(testList).
    class Program
    {
        static void Main()
        {
            List<int> testList = new List<int> { 3, 7, 3, 2, 1, -4, 10, 12, 4 };
            testList.BubbleSort();
            foreach (var t in testList) Console.Write(t + " ");
        }
    }
}

C++

Uses C++11. Compile with

g++ -std=c++11 bubble.cpp
#include <algorithm>
#include <iostream>
#include <iterator>

template <typename RandomAccessIterator>
void bubble_sort(RandomAccessIterator begin, RandomAccessIterator end) {
  bool swapped = true;
  while (begin != end-- && swapped) {
    swapped = false;
    for (auto i = begin; i != end; ++i) {
      if (*(i + 1) < *i) {
        std::iter_swap(i, i + 1);
        swapped = true;
      }
    }
  }
}

int main() {
  int a[] = {100, 2, 56, 200, -52, 3, 99, 33, 177, -199};
  bubble_sort(std::begin(a), std::end(a));
  copy(std::begin(a), std::end(a), std::ostream_iterator<int>(std::cout, " "));
  std::cout << "\n";
}
Output:
-199 -52 2 3 33 56 99 100 177 200

Clojure

Bubble sorts a Java ArrayList in place. Uses 'doseq' iteration construct with a short-circuit when a pass didn't produce any change, and within the pass, an atomic 'changed' variable that gets reset whenever a change occurs.

(ns bubblesort
  (:import java.util.ArrayList))
 
(defn bubble-sort
  "Sort in-place.
  arr must implement the Java List interface and should support
  random access, e.g. an ArrayList."
  ([arr] (bubble-sort compare arr))
  ([cmp arr]
     (letfn [(swap! [i j]
                    (let [t (.get arr i)]
                      (doto arr
                        (.set i (.get arr j))
                        (.set j t))))
             (sorter [stop-i]
                     (let [changed (atom false)]
                       (doseq [i (range stop-i)]
                         (if (pos? (cmp (.get arr i) (.get arr (inc i))))
                           (do
                             (swap! i (inc i))
                             (reset! changed true))))
                       @changed))]
       (doseq [stop-i (range (dec (.size arr)) -1 -1)
               :while (sorter stop-i)])
       arr)))

(println (bubble-sort (ArrayList. [10 9 8 7 6 5 4 3 2 1])))

Purely functional version working on Clojure sequences:

(defn- bubble-step
  "was-changed: whether any elements prior to the current first element
  were swapped;
  returns a two-element vector [partially-sorted-sequence is-sorted]"
 [less? xs was-changed]
  (if (< (count xs) 2)
    [xs (not was-changed)]
    (let [[x1 x2 & xr] xs
	  first-is-smaller   (less? x1 x2)
	  is-changed         (or was-changed (not first-is-smaller))
	  [smaller larger]   (if first-is-smaller [x1 x2] [x2 x1])
	  [result is-sorted] (bubble-step
			      less? (cons larger xr) is-changed)]
      [(cons smaller result) is-sorted])))

(defn bubble-sort
  "Takes an optional less-than predicate and a sequence.
  Returns the sorted sequence.
  Very inefficient (O(n²))"
  ([xs] (bubble-sort <= xs))
  ([less? xs] 
     (let [[result is-sorted] (bubble-step less? xs false)]
       (if is-sorted
	 result
	 (recur less? result)))))
  
(println (bubble-sort [10 9 8 7 6 5 4 3 2 1]))

CLU

% Bubble-sort an array in place. 
bubble_sort = proc [T: type] (a: array[T]) 
              where T has lt: proctype (T,T) returns (bool)

    bound_lo: int := array[T]$low(a)
    bound_hi: int := array[T]$high(a)
     
    for hi: int in int$from_to_by(bound_hi, bound_lo, -1) do
        for i: int in int$from_to(bound_lo, hi-1) do
            if a[hi] < a[i] then
                temp: T := a[i]
                a[i] := a[hi]
                a[hi] := temp
            end
        end
    end 
end bubble_sort

% Print an array
print_arr = proc [T: type] (a: array[T], w: int, s: stream)
            where T has unparse: proctype (T) returns (string)
    for el: T in array[T]$elements(a) do
        stream$putright(s, T$unparse(el), w)
    end
    stream$putc(s, '\n')
end print_arr

start_up = proc ()
    ai = array[int]
    po: stream := stream$primary_output()
    test: ai := ai$[7, -5, 0, 2, 99, 16, 4, 20, 47, 19]
    
    stream$puts(po, "Before: ") print_arr[int](test, 3, po)
    bubble_sort[int](test)
    stream$puts(po, "After:  ") print_arr[int](test, 3, po)
end start_up
Output:
Before:   7 -5  0  2 99 16  4 20 47 19
After:   -5  0  2  4  7 16 19 20 47 99

CMake

Only for lists of integers.

# bubble_sort(var [value1 value2...]) sorts a list of integers.
function(bubble_sort var)
  math(EXPR last "${ARGC} - 1")  # Prepare to sort ARGV[1]..ARGV[last].
  set(again YES)
  while(again)
    set(again NO)
    math(EXPR last "${last} - 1")               # Decrement last index.
    foreach(index RANGE 1 ${last})              # Loop for each index.
      math(EXPR index_plus_1 "${index} + 1")
      set(a "${ARGV${index}}")                  # a = ARGV[index]
      set(b "${ARGV${index_plus_1}}")           # b = ARGV[index + 1]
      if(a GREATER "${b}")                      # If a > b...
        set(ARGV${index} "${b}")                # ...then swap a, b
        set(ARGV${index_plus_1} "${a}")         #    inside ARGV.
        set(again YES)
      endif()
    endforeach(index)
  endwhile()

  set(answer)
  math(EXPR last "${ARGC} - 1")
  foreach(index RANGE 1 "${last}")
    list(APPEND answer "${ARGV${index}}")
  endforeach(index)
  set("${var}" "${answer}" PARENT_SCOPE)
endfunction(bubble_sort)
bubble_sort(result 33 11 44 22 66 55)
message(STATUS "${result}")
-- 11;22;33;44;55;66

COBOL

This is a complete program that demonstrates the bubble sort algorithm in COBOL.
This version is for COBOL-74 which does not have in-line performs, nor END-IF and related constructs.

       IDENTIFICATION DIVISION.
       PROGRAM-ID.                      BUBBLESORT.
       AUTHOR.                          DAVE STRATFORD.
       DATE-WRITTEN.                    MARCH 2010.
       INSTALLATION.                    HEXAGON SYSTEMS LIMITED.
 
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.                 ICL VME.
       OBJECT-COMPUTER.                 ICL VME.
 
       INPUT-OUTPUT SECTION.
       FILE-CONTROL.
           SELECT FA-INPUT-FILE  ASSIGN FL01.
           SELECT FB-OUTPUT-FILE ASSIGN FL02.
 
       DATA DIVISION.
       FILE SECTION.
 
       FD  FA-INPUT-FILE.
       01  FA-INPUT-REC.
         03  FA-DATA                    PIC S9(6).
 
       FD  FB-OUTPUT-FILE.
       01  FB-OUTPUT-REC                PIC S9(6).
 
       WORKING-STORAGE SECTION.
       01  WA-IDENTITY.
         03  WA-PROGNAME                PIC X(10) VALUE "BUBBLESORT".
         03  WA-VERSION                 PIC X(6) VALUE "000001".
 
       01  WB-TABLE.
         03  WB-ENTRY                   PIC 9(8) COMP SYNC OCCURS 100000
                                                  INDEXED BY WB-IX-1.
 
       01  WC-VARS.
         03  WC-SIZE                    PIC S9(8) COMP SYNC.
         03  WC-TEMP                    PIC S9(8) COMP SYNC.
         03  WC-END                     PIC S9(8) COMP SYNC.
         03  WC-LAST-CHANGE             PIC S9(8) COMP SYNC.
 
       01  WF-CONDITION-FLAGS.
         03  WF-EOF-FLAG                PIC X.
           88  END-OF-FILE              VALUE "Y".
         03  WF-EMPTY-FILE-FLAG         PIC X.
           88  EMPTY-FILE               VALUE "Y".
 
       PROCEDURE DIVISION.
       A-MAIN SECTION.
       A-000.
           PERFORM B-INITIALISE.
           IF NOT EMPTY-FILE
              PERFORM C-SORT.
           PERFORM D-FINISH.
 
       A-999.
           STOP RUN.
 
       B-INITIALISE SECTION.
       B-000.
           DISPLAY "*** " WA-PROGNAME " VERSION "
                          WA-VERSION " STARTING ***".
 
           MOVE ALL "N" TO WF-CONDITION-FLAGS.
           OPEN INPUT FA-INPUT-FILE.
           SET WB-IX-1 TO 0.
 
           READ FA-INPUT-FILE AT END MOVE "Y" TO WF-EOF-FLAG
                                                 WF-EMPTY-FILE-FLAG.
 
           PERFORM BA-READ-INPUT UNTIL END-OF-FILE.
 
           CLOSE FA-INPUT-FILE.
 
           SET WC-SIZE TO WB-IX-1.
 
       B-999.
           EXIT.
 
       BA-READ-INPUT SECTION.
       BA-000.
           SET WB-IX-1 UP BY 1.
           MOVE FA-DATA TO WB-ENTRY(WB-IX-1).
 
           READ FA-INPUT-FILE AT END MOVE "Y" TO WF-EOF-FLAG.
 
       BA-999.
           EXIT.
 
       C-SORT SECTION.
       C-000.
           DISPLAY "SORT STARTING".
 
           MOVE WC-SIZE TO WC-END.
           PERFORM E-BUBBLE UNTIL WC-END = 1.
 
           DISPLAY "SORT FINISHED".
 
       C-999.
           EXIT.
 
       D-FINISH SECTION.
       D-000.
           OPEN OUTPUT FB-OUTPUT-FILE.
           SET WB-IX-1 TO 1.
 
           PERFORM DA-WRITE-OUTPUT UNTIL WB-IX-1 > WC-SIZE.
 
           CLOSE FB-OUTPUT-FILE.
 
           DISPLAY "*** " WA-PROGNAME " FINISHED ***".
 
       D-999.
           EXIT.
 
       DA-WRITE-OUTPUT SECTION.
       DA-000.
           WRITE FB-OUTPUT-REC FROM WB-ENTRY(WB-IX-1).
           SET WB-IX-1 UP BY 1.
 
       DA-999.
           EXIT.
 
       E-BUBBLE SECTION.
       E-000.
           MOVE 1 TO WC-LAST-CHANGE.
 
           PERFORM F-PASS VARYING WB-IX-1 FROM 1 BY 1
                          UNTIL WB-IX-1 = WC-END.
 
           MOVE WC-LAST-CHANGE TO WC-END.
 
       E-999.
           EXIT.
 
       F-PASS SECTION.
       F-000.
           IF WB-ENTRY(WB-IX-1) > WB-ENTRY(WB-IX-1 + 1)
              SET  WC-LAST-CHANGE        TO WB-IX-1
              MOVE WB-ENTRY(WB-IX-1)     TO WC-TEMP
              MOVE WB-ENTRY(WB-IX-1 + 1) TO WB-ENTRY(WB-IX-1)
              MOVE WC-TEMP               TO WB-ENTRY(WB-IX-1 + 1).
 
       F-999.
           EXIT.

A more modern version of COBOL.

       identification division.
       program-id. BUBBLSRT.
       data division.
       working-storage section.
       01 changed-flag      pic x.
          88 hasChanged         value 'Y'.
          88 hasNOTChanged      value 'N'.
       01 itemCount         pic 99.
       01 tempItem          pic 99.
       01 itemArray.   
          03 itemArrayCount pic 99.
          03 item           pic 99 occurs 99 times
                                   indexed by itemIndex.
      *          
       procedure division.
       main.
      * place the values to sort into itemArray
           move 10 to itemArrayCount 
           move 28 to item (1)
           move 44 to item (2)
           move 46 to item (3)           
           move 24 to item (4)
           move 19 to item (5)
           move  2 to item (6)
           move 17 to item (7)
           move 11 to item (8)
           move 24 to item (9)           
           move  4 to item (10)
      * store the starting count in itemCount and perform the sort    
           move itemArrayCount to itemCount
           perform bubble-sort
      * output the results     
           perform varying itemIndex from 1 by 1 
              until itemIndex > itemArrayCount
              display item (itemIndex) ';' with no advancing
           end-perform   
      * thats it!       
           stop run.
      *     
       bubble-sort.
           perform with test after until hasNOTchanged
              set hasNOTChanged to true
              subtract 1 from itemCount
              perform varying itemIndex from 1 by 1 
                 until itemIndex > itemCount
                 if item (itemIndex) > item (itemIndex + 1)
                    move item (itemIndex) to tempItem
                    move item (itemIndex + 1) to item (itemIndex)
                    move tempItem to item (itemIndex + 1)
                    set hasChanged to true
                 end-if   
              end-perform   
           end-perform   
           .
Output:
 Output: 02;04;11;17;19;24;24;28;44;46; 

Common Lisp

Bubble sort an sequence in-place, using the < operator for comparison if no comaprison function is provided

(defun bubble-sort (sequence &optional (compare #'<))
  "sort a sequence (array or list) with an optional comparison function (cl:< is the default)"
  (loop with sorted = nil until sorted do
        (setf sorted t)
        (loop for a below (1- (length sequence)) do
              (unless (funcall compare (elt sequence a)
                                       (elt sequence (1+ a)))
                (rotatef (elt sequence a)
                         (elt sequence (1+ a)))
                (setf sorted nil)))))
(bubble-sort (list 5 4 3 2 1))

elt has linear access time for lists, making the prior implementation of bubble-sort very expensive (although very clear, and straightforward to code. Here is an implementation that works efficiently for both vectors and lists. For lists it also has the nice property that the input list and the sorted list begin with the same cons cell.

(defun bubble-sort-vector (vector predicate &aux (len (1- (length vector))))
  (do ((swapped t)) ((not swapped) vector)
    (setf swapped nil)
    (do ((i (min 0 len) (1+ i))) ((eql i len))
      (when (funcall predicate (aref vector (1+ i)) (aref vector i))
        (rotatef (aref vector i) (aref vector (1+ i)))
        (setf swapped t)))))

(defun bubble-sort-list (list predicate)
  (do ((swapped t)) ((not swapped) list)
    (setf swapped nil)
    (do ((list list (rest list))) ((endp (rest list)))
      (when (funcall predicate (second list) (first list))
        (rotatef (first list) (second list))
        (setf swapped t)))))

(defun bubble-sort (sequence predicate)
  (etypecase sequence
    (list (bubble-sort-list sequence predicate))
    (vector (bubble-sort-vector sequence predicate))))

Cowgol

include "cowgol.coh";

# Comparator interface, on the model of C, i.e:
# foo < bar => -1, foo == bar => 0, foo > bar => 1
typedef CompRslt is int(-1, 1);
interface Comparator(foo: intptr, bar: intptr): (rslt: CompRslt);

# Bubble sort an array of pointer-sized integers given a comparator function
# (This is the closest you can get to polymorphism in Cowgol).
sub bubbleSort(A: [intptr], len: intptr, comp: Comparator) is
    loop
        var swapped: uint8 := 0;
        var i: intptr := 1;
        var a := @next A;
        while i < len loop
            if comp([@prev a], [a]) == 1 then
                var t := [a];
                [a] := [@prev a];
                [@prev a] := t;
                swapped := 1;
            end if;
            a := @next a;
            i := i + 1;
        end loop;
        if swapped == 0 then
            return;
        end if;
    end loop;
end sub;

# Test: sort a list of numbers
sub NumComp implements Comparator is
    # Compare the inputs as numbers
    if foo < bar then rslt := -1;
    elseif foo > bar then rslt := 1;
    else rslt := 0;
    end if;
end sub;

# Numbers
var numbers: intptr[] := {
    65,13,4,84,29,5,96,73,5,11,17,76,38,26,44,20,36,12,44,51,79,8,99,7,19,95,26
};

# Sort the numbers in place
bubbleSort(&numbers as [intptr], @sizeof numbers, NumComp);

# Print the numbers (hopefully in order)
var i: @indexof numbers := 0;
while i < @sizeof numbers loop
    print_i32(numbers[i] as uint32);
    print_char(' ');
    i := i + 1;
end loop;
print_nl();
Output:
4 5 5 7 8 11 12 13 17 19 20 26 26 29 36 38 44 44 51 65 73 76 79 84 95 96 99

D

import std.stdio, std.algorithm : swap;

T[] bubbleSort(T)(T[] data) pure nothrow
{
    foreach_reverse (n; 0 .. data.length)
    {
        bool swapped;
        foreach (i; 0 .. n)
            if (data[i] > data[i + 1]) {
                swap(data[i], data[i + 1]);
                swapped = true;
            }
        if (!swapped)
            break;
    }
    return data;
}


void main()
{
    auto array = [28, 44, 46, 24, 19, 2, 17, 11, 25, 4];
    writeln(array.bubbleSort());
}
Output:
[2, 4, 11, 17, 19, 24, 25, 28, 44, 46]

Dart

List<num> bubbleSort(List<num> list) {
  var retList = new List<num>.from(list);
  var tmp;
  var swapped = false;
  do {
    swapped = false;
    for(var i = 1; i < retList.length; i++) {
      if(retList[i - 1] > retList[i]) {
        tmp = retList[i - 1];
        retList[i - 1] = retList[i];
        retList[i] = tmp;
        swapped = true;
      }
    }
  } while(swapped);
  
  return retList;
}

Delphi

Dynamic array is a 0-based array of variable length

Static array is an arbitrary-based array of fixed length

program TestBubbleSort;

{$APPTYPE CONSOLE}

{.$DEFINE DYNARRAY}  // remove '.' to compile with dynamic array

type
  TItem = Integer;   // declare ordinal type for array item
{$IFDEF DYNARRAY}
  TArray = array of TItem;          // dynamic array
{$ELSE}
  TArray = array[0..15] of TItem;   // static array
{$ENDIF}

procedure BubbleSort(var A: TArray);
var
  Item: TItem;
  K, L, J: Integer;

begin
  L:= Low(A) + 1;
  repeat
    K:= High(A);
    for J:= High(A) downto L do begin
      if A[J - 1] > A[J] then begin
        Item:= A[J - 1];
        A[J - 1]:= A[J];
        A[J]:= Item;
        K:= J;
      end;
    end;
    L:= K + 1;
  until L > High(A);
end;

var
  A: TArray;
  I: Integer;

begin
{$IFDEF DYNARRAY}
  SetLength(A, 16);
{$ENDIF}
  for I:= Low(A) to High(A) do
    A[I]:= Random(100);
  for I:= Low(A) to High(A) do
    Write(A[I]:3);
  Writeln;
  BubbleSort(A);
  for I:= Low(A) to High(A) do
    Write(A[I]:3);
  Writeln;
  Readln;
end.
Output:
  0  3 86 20 27 67 31 16 37 42  8 47  7 84  5 29
  0  3  5  7  8 16 20 27 29 31 37 42 47 67 84 86

Draco

/* Bubble sort an array of integers */
proc nonrec bubblesort([*] int a) void:
    bool sorted;
    int i, temp;
    sorted := false;
    while not sorted do
        sorted := true;
        for i from 1 upto dim(a,1)-1 do
            if a[i-1] > a[i] then
                sorted := false;
                temp := a[i-1];
                a[i-1] := a[i];
                a[i] := temp
            fi
        od
    od
corp

/* Test */
proc nonrec main() void:
    int i;
    [10] int a = (9, -5, 3, 3, 24, -16, 3, -120, 250, 17);
    
    write("Before sorting: ");
    for i from 0 upto 9 do write(a[i]:5) od; 
    writeln();
    
    bubblesort(a);
    write("After sorting:  ");
    for i from 0 upto 9 do write(a[i]:5) od 
corp
Output:
Before sorting:     9   -5    3    3   24  -16    3 -120  250   17
After sorting:   -120  -16   -5    3    3    3    9   17   24  250

Dyalect

func bubbleSort(list) {
    var done = false
    while !done {
        done = true
        for i in 1..(list.Length()-1) {
            if list[i - 1] > list[i] {
                var x = list[i]
                list[i] = list[i - 1]
                list[i - 1] = x
                done = false
            }
        }
    }
}
 
var xs = [3,1,5,4,2,6]
bubbleSort(xs)
print(xs)
Output:
[1, 2, 3, 4, 5, 6]

E

def bubbleSort(target) {
  __loop(fn {
    var changed := false
    for i in 0..(target.size() - 2) {
      def [a, b] := target(i, i + 2)
      if (a > b) {
        target(i, i + 2) := [b, a]
        changed := true
      }
    }
    changed
  })
}

(Uses the primitive __loop directly because it happens to map to the termination test for this algorithm well.)

EasyLang

proc bubble_sort . d[] .
   for i = len d[] - 1 downto 1
      for j = 1 to i
         if d[j] > d[j + 1]
            swap d[j] d[j + 1]
         .
      .
   .
.
arr[] = [ 5 1 19 25 12 1 14 7 ]
bubble_sort arr[]
print arr[]
Output:
[ 1 1 5 7 12 14 19 25 ]

EchoLisp

;; sorts a vector of objects in place
;; proc is an user defined comparison procedure

(define (bubble-sort V proc)
(define length (vector-length V))
    (for* ((i (in-range 0 (1- length))) (j (in-range (1+ i) length)))
    (unless (proc (vector-ref V i) (vector-ref V j)) (vector-swap! V i j)))
    V)


(define V #( albert antoinette elvis zen simon))
(define (sort/length a b) ;; sort by string length
    (< (string-length a) (string-length b)))

(bubble-sort V sort/length)
     #(zen simon elvis albert antoinette)

EDSAC order code

This demo of a bubble sort on the EDSAC shows how awkward it was to deal with arrays in the absence of an index register (one was added in 1953). To refer to an array element at a given index, the programmer had to manufacture an EDSAC order referring to the correct address, then plant that order in the code.

To clarify the EDSAC program, an equivalent Pascal program is added as a comment.

  [Bubble sort demo for Rosetta Code website]
  [EDSAC program. Initial Orders 2]

  [Sorts a list of double-word integers.
   List must be loaded at an even address.
   First item gives number of items to follow.
   Address of list is placed in location 49.
   List can then be referred to with code letter L.]
          T49K
          P300F [<---------- address of list here]

  [Subroutine R2, reads positive integers during input of orders.
   Items separated by F; list ends with #TZ.]
  GKT20FVDL8FA40DUDTFI40FA40FS39FG@S2FG23FA5@T5@E4@E13Z

  [Tell R2 where to store integers it reads from tape.]
        T    #L  ['T m D' in documentation, but this also works]

  [Lists of integers, comment out all except one]
  [10 integers from digits of pi]
  10F314159F265358F979323F846264F338327F950288F419716F939937F510582F097494#TZ

  [32 integers from digits of e ]
  [32F
   27182818F28459045F23536028F74713526F62497757F24709369F99595749F66967627F
   72407663F03535475F94571382F17852516F64274274F66391932F00305992F18174135F
   96629043F57290033F42952605F95630738F13232862F79434907F63233829F88075319F
   52510190F11573834F18793070F21540891F49934884F16750924F47614606F68082264#TZ]

  [Library subroutine P7, prints positive integer at 0D.
   35 locations; load at aneven address.]
        T  56 K
  GKA3FT26@H28#@NDYFLDT4DS27@TFH8@S8@T1FV4DAFG31@SFLDUFOFFFSFL4F
  T4DA1FA27@G11@XFT28#ZPFT27ZP1024FP610D@524D!FO30@SFL8FE22@

  [The EDSAC code below implements the following Pascal program,
   where the integers to be sorted are in a 1-based array x.
   Since the assembler used (EdsacPC by Martin Campbell-Kelly)
   doesn't allow square brackets inside comments, they are
   replaced here by curly brackets.]
  [   
    swapped := true;
    j := n; // number of items 
    while (swapped and (j >= 2)) do begin
      swapped := false;
      for i := 1 to j - 1 do begin
        // Using temp in the comparison makes the EDSAC code a bit simpler
        temp := x{i};
        if (x{i + 1} < temp) then begin
          x{i} := x{i + 1};
          x{i + 1} := temp;
          swapped := true;
        end;
      end;
      dec(j);
    end;
  ]
    [Main routine]
        T 100 K
        G     K
    [0] P F P F [double-word temporary store]
    [2] P     F [flag for swapped, >= 0 if true, < 0 if false]
    [3] P     F ['A' order for x{j}; implicitly defines j]
    [4] P   2 F [to change list index by 1, i.e.change address by 2]
    [5] A    #L ['A' order for number of items]
    [6] A   2#L ['A' order for x{1}]
    [7] A   4#L ['A' order for x{2}]
    [8] I2046 F [add to convert 'A' order to 'T' and dec address by 2]
    [9] K4096 F [(1) minimum 17-bit value (2) teleprinter null]
   [10] P     D [constant 1, used in printing]
   [11] #     F [figure shift]
   [12] &     F [line feed]
   [13] @     F [carriage return]

       [Enter here with acc = 0]
   [14] T   2 @ [swapped := true]
        A     L [get count, n in Pascal program above]
        L   1 F [times 4 by shifting]
        A   5 @ [make 'A' order for x{n}; initializes j := n]

       [Start 'while' loop of Pascal program.
        Here acc = 'A' order for x{j}]
   [18] U   3 @ [update j]
        S   7 @ [subtract 'A' order for x{2}]
        G  56 @ [if j < 2 then done]
        T     F [acc := 0]
        A   2 @ [test for swapped, acc >= 0 if so]
        G  56 @ [if not swapped then done]
        A   9 @ [change acc from >= 0 to < 0]
        T   2 @ [swapped := false until swap occurs]
        A   6 @ ['A' order for x{1}; initializes i := 1]

       [Start 'for' loop of Pascal program.
        Here acc = 'A' order for x{i}]
   [27] U  36 @ [store order]
        S   3 @ [subtract 'A' order for x{j}]
        E  52 @ [out of 'for' loop if i >= j]
        T     F [clear acc]
        A  36 @ [load 'A' order for x{i}]
        A   4 @ [inc address by 2]
        U  38 @ [plant 'A' order for x{i + 1}]
        A   8 @ ['A' to 'T', and dec address by 2]
        T  42 @ [plant 'T' order for x{i}]
   [36] A    #L [load x{i}; this order implicitly defines i]
        T    #@ [temp := x{i}]
   [38] A    #L [load x{i + 1}]
        S    #@ [acc := x{i + 1} - temp]
        E  49 @ [don't swap if x{i + 1} >= temp]

       [Here to swap x{i} and x{i + 1}]
        A    #@ [restore acc := x{i + 1} after test]
   [42] T    #L [x{i} := x{i + 1}]
        A  42 @ [load 'T' order for x{i}]
        A   4 @ [inc address by 2]
        T  47 @ [plant 'T' order for x{i + 1}]
        A    #@ [load temp]
   [47] T    #L [to x{i + 1}]
        T   2 @ [swapped := 0 (true)]

   [49] T     F [clear acc]
        A  38 @ [load 'A' order for x{i + 1}]
        G  27 @ [loop (unconditional) to inc i]

   [52] T     F
        A   3 @ [load 'A' order for x{j}]
        S   4 @ [dec address by 2]
        G  18 @ [loop (unconditional) to dec j]

       [Print the sorted list of integers]
   [56] O  11 @ [figure shift]
        T     F [clear acc]
        A   5 @ [load 'A' order for head of list]
        T  65 @ [plant in code below]
        S     L [load negative number of items]
   [61] T     @ [use first word of temp store for count]
        A  65 @ [load 'A' order for item]
        A   4 @ [inc address by 2]
        T  65 @ [store back]
   [65] A    #L [load next item in list] 
        T     D [to 0D for printing]
   [67] A  67 @ [for subroutine return]
        G  56 F [print integer, clears acc]
        O  13 @ [print CR]
        O  12 @ [print LF]
        A     @ [negative count]
        A  10 @ [add 1]
        G  61 @ [loop back till count = 0]
   [74] O   9 @ [null to flush teleprinter buffer]
        Z     F [stop]
        E  14 Z [define entry point]
        P     F [acc = 0 on entry]
Output:
     97494
    265358
    314159
    338327
    419716
    510582
    846264
    939937
    950288
    979323

Eiffel

Works with: EiffelStudio version 6.6 (with provisional loop syntax)

This solution is presented in two classes. The first is a simple application that creates a set, an instance of MY_SORTED_SET, and adds elements to the set in unsorted order. It iterates across the set printing the elements, then it sorts the set, and reprints the elements.

class
    APPLICATION
create
    make

feature
    make
            -- Create and print sorted set
        do
            create my_set.make
            my_set.put_front (2)
            my_set.put_front (6)
            my_set.put_front (1)
            my_set.put_front (5)
            my_set.put_front (3)
            my_set.put_front (9)
            my_set.put_front (8)
            my_set.put_front (4)
            my_set.put_front (10)
            my_set.put_front (7)
            print ("Before: ")
            across my_set as ic loop print (ic.item.out + " ")  end
            print ("%NAfter : ")
            my_set.sort
            across my_set as ic loop print (ic.item.out + " ")  end
        end

    my_set: MY_SORTED_SET [INTEGER]
            -- Set to be sorted
end

The second class is MY_SORTED_SET.

class
    MY_SORTED_SET [G -> COMPARABLE]
inherit
    TWO_WAY_SORTED_SET [G]
        redefine
            sort
        end
create
    make

feature
    sort
            -- Sort with bubble sort
        local
            l_unchanged: BOOLEAN
            l_item_count: INTEGER
            l_temp: G
        do
            from
                l_item_count := count
            until
                l_unchanged
            loop
                l_unchanged := True
                l_item_count := l_item_count - 1
                across 1 |..| l_item_count as ic loop
                    if Current [ic.item] > Current [ic.item + 1] then
                        l_temp := Current [ic.item]
                        Current [ic.item] := Current [ic.item + 1]
                        Current [ic.item + 1] := l_temp
                        l_unchanged := False
                    end
                end
            end
        end
end

This class inherits from the Eiffel library class TWO_WAY_SORTED_SET, which implements sets whose elements are comparable. Therefore, the set can be ordered and in fact is kept so under normal circumstances.

MY_SORTED_SET redefines only the routine sort which contains the implementation of the sort algorithm. The implementation in the redefined version of sort in MY_SORTED_SET uses a bubble sort.

Output:
Before: 7 10 4 8 9 3 5 1 6 2
After : 1 2 3 4 5 6 7 8 9 10

TWO_WAY_SORTED_SET is implemented internally as a list. For this example, we use the feature put_front which explicitly adds each new element to the beginning of the list, allowing us to show that the elements are unordered until we sort them. It also causes, in the "Before" output, the elements to be printed in the reverse of the order in which they were added. Under normal circumstances, we would use the feature extend (rather than put_front) to add elements to the list. This would assure that the order was maintained even as elements were added.

Elena

Translation of: C#

ELENA 6.x :

import system'routines;
import extensions;
 
extension op
{
    bubbleSort()
    {
        var list := self.clone();
 
        bool madeChanges := true;
        int itemCount := list.Length;
        while (madeChanges) 
        {
            madeChanges := false;
            itemCount -= 1;
            for(int i := 0; i < itemCount; i += 1)
            {
                if (list[i] > list[i + 1])
                {
                    list.exchange(i,i+1);
                    madeChanges := true
                }
            }
        };
 
        ^ list
    }
}
 
public program()
{
    var list := new int[]{3, 7, 3, 2, 1, -4, 10, 12, 4};
    console.printLine(list.bubbleSort().asEnumerable())
}
Output:
-4,1,2,3,3,4,7,10,12

Elixir

defmodule Sort do
  def bsort(list) when is_list(list) do
    t = bsort_iter(list)

    if t == list, do: t, else: bsort(t)
  end

  def bsort_iter([x, y | t]) when x > y, do: [y | bsort_iter([x | t])]
  def bsort_iter([x, y | t]), do: [x | bsort_iter([y | t])]
  def bsort_iter(list), do: list
end

Erlang

sort/3 copied from Stackoverflow.

-module( bubble_sort ).

-export( [list/1, task/0] ).

list( To_be_sorted ) -> sort( To_be_sorted, [], true ).

task() ->
	List = "asdqwe123",
	Sorted = list( List ),
	io:fwrite( "List ~p is sorted ~p~n", [List, Sorted] ).


sort( [], Acc, true ) -> lists:reverse( Acc );
sort( [], Acc, false ) -> sort( lists:reverse(Acc), [], true );
sort( [X, Y | T], Acc, _Done ) when X > Y -> sort( [X | T], [Y | Acc], false );
sort( [X | T], Acc, Done ) -> sort( T, [X | Acc], Done ).
Output:
7> bubble_sort:task().
List "asdqwe123" is sorted "123adeqsw"

ERRE

PROGRAM BUBBLE_SORT

DIM FLIPS%,N,J

DIM A%[100]

BEGIN

! init random number generator
   RANDOMIZE(TIMER)
! fills array A% with random data
   FOR N=1 TO UBOUND(A%,1) DO
     A%[N]=RND(1)*256
   END FOR
! sort array
   FLIPS%=TRUE
   WHILE FLIPS% DO
     FLIPS%=FALSE
     FOR N=1 TO UBOUND(A%,1)-1 DO
        IF A%[N]>A%[N+1] THEN
            SWAP(A%[N],A%[N+1])
            FLIPS%=TRUE
        END IF
     END FOR
   END WHILE
! print sorted array
   FOR N=1 TO UBOUND(A%,1) DO
     PRINT(A%[N];)
   END FOR
   PRINT
END PROGRAM

Euphoria

function bubble_sort(sequence s)
    object tmp
    integer changed
    for j = length(s) to 1 by -1 do
        changed = 0
        for i = 1 to j-1 do
            if compare(s[i], s[i+1]) > 0 then
                tmp = s[i]
                s[i] = s[i+1]
                s[i+1] = tmp
                changed = 1
            end if
        end for
        if not changed then
            exit
        end if
    end for
    return s
end function

include misc.e
constant s = {4, 15, "delta", 2, -31, 0, "alfa", 19, "gamma", 2, 13, "beta", 782, 1}

puts(1,"Before: ")
pretty_print(1,s,{2})
puts(1,"\nAfter: ")
pretty_print(1,bubble_sort(s),{2})
Output:
Before: {
  4,
  15,
  "delta",
  2,
  -31,
  0,
  "alfa",
  19,
  "gamma",
  2,
  13,
  "beta",
  782,
  1
}
After: {
  -31,
  0,
  1,
  2,
  2,
  4,
  13,
  15,
  19,
  782,
  "alfa",
  "beta",
  "delta",
  "gamma"
}

Ezhil

## இந்த நிரல் ஒரு பட்டியலில் உள்ள எண்களை Bubble Sort என்ற முறைப்படி ஏறுவரிசையிலும் பின்னர் அதையே இறங்குவரிசையிலும் அடுக்கித் தரும்

## மாதிரிக்கு நாம் ஏழு எண்களை எடுத்துக்கொள்வோம்

எண்கள் = [5, 1, 10, 8, 1, 21, 4, 2]
எண்கள்பிரதி = எண்கள்

பதிப்பி "ஆரம்பப் பட்டியல்:"
பதிப்பி எண்கள்

நீளம் = len(எண்கள்)
குறைநீளம் = நீளம் - 1

@(குறைநீளம் != -1) வரை
  மாற்றம் = -1
  @(எண் = 0, எண் < குறைநீளம், எண் = எண் + 1) ஆக
    முதலெண் = எடு(எண்கள், எண்)
    இரண்டாமெண் = எடு(எண்கள், எண் + 1)
    @(முதலெண் > இரண்டாமெண்) ஆனால்

      ## பெரிய எண்களை ஒவ்வொன்றாகப் பின்னே நகர்த்துகிறோம்

      வெளியேஎடு(எண்கள், எண்)
      நுழைக்க(எண்கள், எண், இரண்டாமெண்)
      வெளியேஎடு(எண்கள், எண் + 1)
      நுழைக்க(எண்கள், எண் + 1, முதலெண்)
      மாற்றம் = எண்
    முடி
  முடி
  குறைநீளம் = மாற்றம்
முடி

பதிப்பி "ஏறு வரிசையில் அமைக்கப்பட்ட பட்டியல்:"
பதிப்பி எண்கள்

## இதனை இறங்குவரிசைக்கு மாற்றுவதற்கு எளிய வழி

தலைகீழ்(எண்கள்)

## இப்போது, நாம் ஏற்கெனவே எடுத்துவைத்த எண்களின் பிரதியை Bubble Sort முறைப்படி இறங்குவரிசைக்கு மாற்றுவோம்

நீளம் = len(எண்கள்பிரதி)
குறைநீளம் = நீளம் - 1

@(குறைநீளம் != -1) வரை
  மாற்றம் = -1
  @(எண் = 0, எண் < குறைநீளம், எண் = எண் + 1) ஆக
    முதலெண் = எடு(எண்கள்பிரதி, எண்)
    இரண்டாமெண் = எடு(எண்கள்பிரதி, எண் + 1)
    @(முதலெண் < இரண்டாமெண்) ஆனால்

      ## சிறிய எண்களை ஒவ்வொன்றாகப் பின்னே நகர்த்துகிறோம்

      வெளியேஎடு(எண்கள்பிரதி, எண்)
      நுழைக்க(எண்கள்பிரதி, எண், இரண்டாமெண்)
      வெளியேஎடு(எண்கள்பிரதி, எண் + 1)
      நுழைக்க(எண்கள்பிரதி, எண் + 1, முதலெண்)
      மாற்றம் = எண்
    முடி
  முடி
  குறைநீளம் = மாற்றம்
முடி

பதிப்பி "இறங்கு வரிசையில் அமைக்கப்பட்ட பட்டியல்:"
பதிப்பி எண்கள்பிரதி

F#

let BubbleSort (lst : list<int>) = 
    let rec sort accum rev lst =
        match lst, rev with
        | [], true -> accum |> List.rev
        | [], false -> accum |> List.rev |> sort [] true
        | x::y::tail, _ when x > y -> sort (y::accum) false (x::tail)
        | head::tail, _ -> sort (head::accum) rev tail
    sort [] true lst

Factor

USING: fry kernel locals math math.order sequences
sequences.private ;
IN: rosetta.bubble

<PRIVATE

:: ?exchange ( i seq quot -- ? )
    i i 1 + [ seq nth-unsafe ] bi@ quot call +gt+ = :> doit?
    doit? [ i i 1 + seq exchange ] when
    doit? ; inline

: 1pass ( seq quot -- ? )
    [ [ length 1 - iota ] keep ] dip
    '[ _ _ ?exchange ] [ or ] map-reduce ; inline

PRIVATE>

: sort! ( seq quot -- )
    over empty?
    [ 2drop ] [ '[ _ _ 1pass ] loop ] if ; inline

: natural-sort! ( seq -- )
    [ <=> ] sort! ;

It is possible to pass your own comparison operator to sort!, so you can f.e. sort your sequence backwards with passing [ >=< ] into it.

10 [ 10000 random ] replicate
[ "Before:  " write . ]
[ "Natural: " write [ natural-sort! ] keep . ]
[ "Reverse: " write [ [ >=< ] sort! ] keep . ] tri
Before:  { 3707 5045 4661 1489 3140 7195 8844 6506 6322 3199 }
Natural: { 1489 3140 3199 3707 4661 5045 6322 6506 7195 8844 }
Reverse: { 8844 7195 6506 6322 5045 4661 3707 3199 3140 1489 }

Fish

This is not a complete implementation of bubblesort: it doesn't keep a boolean flag whether to stop, so it goes on printing each stage of the sorting process ad infinitum.

v Sorts the (pre-loaded) stack
  with bubblesort.
v                     <
\l0=?;l&
>&:1=?v1-&2[$:{:{](?${
          >~{ao       ^
      >~}l &{   v
o","{n:&-1^?=0:&<

Forth

Sorts the 'cnt' cells stored at 'addr' using the test stored in the deferred word 'bubble-test'. Uses forth local variables for clarity.

defer bubble-test
' > is bubble-test

: bubble { addr cnt -- }
  cnt 1 do
    addr cnt i - cells bounds do
      i 2@ bubble-test if i 2@ swap i 2! then
    cell +loop
  loop ;

This is the same algorithm done without the local variables:

: bubble ( addr cnt -- )
  dup 1 do
    2dup i - cells bounds do
      i 2@ bubble-test if i 2@ swap i 2! then
    cell +loop
  loop ;

Version with O(n) best case:

: bubble ( addr len -- )
  begin
    1- 2dup  true -rot  ( sorted addr len-1 )
    cells bounds ?do
      i 2@ bubble-test if
        i 2@ swap i 2!
        drop false   ( mark unsorted )
      then
    cell +loop  ( sorted )
  until 2drop ;

Test any version with this:

create test
8 , 1 , 4 , 2 , 10 , 3 , 7 , 9 , 6 , 5 ,
here test - cell / constant tcnt

test tcnt cells dump
' > is bubble-test
test tcnt bubble
test tcnt cells dump
' < is bubble-test
test tcnt bubble
test tcnt cells dump

Fortran

SUBROUTINE Bubble_Sort(a)
  REAL, INTENT(in out), DIMENSION(:) :: a
  REAL :: temp
  INTEGER :: i, j
  LOGICAL :: swapped
 
  DO j = SIZE(a)-1, 1, -1
    swapped = .FALSE.
    DO i = 1, j
      IF (a(i) > a(i+1)) THEN
        temp = a(i)
        a(i) = a(i+1)
        a(i+1) = temp
        swapped = .TRUE.
      END IF
    END DO
    IF (.NOT. swapped) EXIT
  END DO
END SUBROUTINE Bubble_Sort

g-fu

(fun bubbles (vs)
  (let done? F n (len vs))
  
  (while (not done?)
    (set done? T n (- n 1))
    
    (for (n i)
      (let x (# vs i) j (+ i 1) y (# vs j))
      (if (> x y) (set done? F (# vs i) y (# vs j) x))))

  vs)

(bubbles '(2 1 3))
---
(1 2 3)

GDScript

Here is an implementation of Bubble Sort algorithm in GDScript for array of primitive types:

extends Node2D


func BubbleSort(_array : Array) -> void:
    for i in range(_array.size() - 1):
        var swapped : bool = false
        for j in range(_array.size() - i - 1):
            if _array[j] > _array[j + 1]:
                var tmp = _array[j]
                _array[j] = _array[j + 1]
                _array[j + 1] = tmp
                swapped = true
        if not swapped:
            break
    return


func _ready() -> void:
    var array : Array = range(-10, 10)
    array.shuffle()

    print("Initial array:")
    print(array)

    BubbleSort(array)

    print("Sorted array:")
    print(array)
    return

Possible output:

Output:
Initial array:
[-7, -6, 2, -8, 4, -1, -3, -5, 5, -10, -4, 7, 3, 8, 0, -9, 6, 9, -2, 1]
Sorted array:
[-10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]

If you need to sort objects, this can be done in way like this:

class Comparable:
    var Value

    func _init(_val):
        self.Value = _val

    func compare(_other : Comparable) -> int:
        # Here is the simple implementation of compare
        # for primitive type wrapper.
        return self.Value - _other.Value


func BubbleSortObjects(_array : Array) -> void:
    for i in range(_array.size() - 1):
        var swapped : bool = false
        for j in range(_array.size() - i - 1):
            if _array[j].compare(_array[j + 1]) > 0:
                var tmp = _array[j]
                _array[j] = _array[j + 1]
                _array[j + 1] = tmp
                swapped = true
        if not swapped:
            break
    return

This approach is slow though. To sort array of primitive types use Array.sort() method instead. To sort array of objects you can use Array.sort_custom(func : Callable) method.

Go

Per task pseudocode:

package main

import "fmt"

func main() {
    list := []int{31, 41, 59, 26, 53, 58, 97, 93, 23, 84}
    fmt.Println("unsorted:", list)

    bubblesort(list)
    fmt.Println("sorted!  ", list)
}

func bubblesort(a []int) {
    for itemCount := len(a) - 1; ; itemCount-- {
        hasChanged := false
        for index := 0; index < itemCount; index++ {
            if a[index] > a[index+1] {
                a[index], a[index+1] = a[index+1], a[index]
                hasChanged = true
            }
        }
        if hasChanged == false {
            break
        }
    }
}

More generic version that can sort anything that implements sort.Interface:

package main

import (
  "sort"
  "fmt"
)

func main() {
    list := []int{31, 41, 59, 26, 53, 58, 97, 93, 23, 84}
    fmt.Println("unsorted:", list)

    bubblesort(sort.IntSlice(list))
    fmt.Println("sorted!  ", list)
}

func bubblesort(a sort.Interface) {
    for itemCount := a.Len() - 1; ; itemCount-- {
        hasChanged := false
        for index := 0; index < itemCount; index++ {
            if a.Less(index+1, index) {
                a.Swap(index, index+1)
                hasChanged = true
            }
        }
        if !hasChanged {
            break
        }
    }
}

Groovy

Solution:

def makeSwap = { a, i, j = i+1 -> print "."; a[[i,j]] = a[[j,i]] }

def checkSwap = { a, i, j = i+1 -> [(a[i] > a[j])].find { it }.each { makeSwap(a, i, j) } }

def bubbleSort = { list ->
    boolean swapped = true
    while (swapped) { swapped = (1..<list.size()).any { checkSwap(list, it-1) } }
    list
}

Test Program:

println bubbleSort([23,76,99,58,97,57,35,89,51,38,95,92,24,46,31,24,14,12,57,78,4])
println bubbleSort([88,18,31,44,4,0,8,81,14,78,20,76,84,33,73,75,82,5,62,70,12,7,1])
Output:
..............................................................................................................................................[4, 12, 14, 23, 24, 24, 31, 35, 38, 46, 51, 57, 57, 58, 76, 78, 89, 92, 95, 97, 99]
.........................................................................................................................................[0, 1, 4, 5, 7, 8, 12, 14, 18, 20, 31, 33, 44, 62, 70, 73, 75, 76, 78, 81, 82, 84, 88]

Haskell

This version checks for changes in a separate step for simplicity, because Haskell has no variables to track them with.

bsort :: Ord a => [a] -> [a]
bsort s = case _bsort s of
               t | t == s    -> t
                 | otherwise -> bsort t
  where _bsort (x:x2:xs) | x > x2    = x2:(_bsort (x:xs))
                         | otherwise = x:(_bsort (x2:xs))
        _bsort s = s

This version uses the polymorphic Maybe type to designate unchanged lists. (The type signature of _bsort is now Ord a => [a] -> Maybe [a].) It is slightly faster than the previous one.

import Data.Maybe (fromMaybe)
import Control.Monad

bsort :: Ord a => [a] -> [a]
bsort s = maybe s bsort $ _bsort s
  where _bsort (x:x2:xs) = if x > x2
            then Just $ x2 : fromMaybe (x:xs) (_bsort $ x:xs)
            else liftM (x:) $ _bsort (x2:xs)
        _bsort _         = Nothing

This version is based on the above, but avoids sorting the whole list each time. To implement this without a counter and retain using pattern matching, inner sorting is reversed, and then the result is reversed back. Sorting is based on a predicate, e.g., (<) or (>).

import Data.Maybe (fromMaybe)
import Control.Monad

bubbleSortBy ::  (a -> a -> Bool) -> [a] -> [a]
bubbleSortBy f as = case innerSort $ reverse as of
                         Nothing -> as
                         Just v  -> let (x:xs) = reverse v
                                   in x : bubbleSortBy f xs
    where innerSort (a:b:cs) = if b `f` a
                                  then liftM (a:) $ innerSort (b:cs)
                                  else Just $ b : fromMaybe (a:cs)
                                                (innerSort $ a:cs)
          innerSort _        = Nothing

bsort :: Ord a => [a] -> [a]
bsort =  bubbleSortBy (<)

Haxe

class BubbleSort {
  @:generic 
  public static function sort<T>(arr:Array<T>) {
    var madeChanges = false;
    var itemCount = arr.length;
    do {
      madeChanges = false;
      itemCount--;
      for (i in 0...itemCount) {
        if (Reflect.compare(arr[i], arr[i + 1]) > 0) {
          var temp = arr[i + 1];
          arr[i + 1] = arr[i];
          arr[i] = temp;
          madeChanges = true;
        }
      }
    } while (madeChanges);
  }
}

class Main {
  static function main() {
    var integerArray   = [1, 10, 2, 5, -1, 5, -19, 4, 23, 0];
    var floatArray = [1.0, -3.2, 5.2, 10.8, -5.7, 7.3, 
                      3.5, 0.0, -4.1, -9.5];
    var stringArray = ['We', 'hold', 'these', 'truths', 'to', 
                       'be', 'self-evident', 'that', 'all', 
                       'men', 'are', 'created', 'equal'];
    Sys.println('Unsorted Integers: ' + integerArray);
    BubbleSort.sort(integerArray);
    Sys.println('Sorted Integers:   ' + integerArray);
    Sys.println('Unsorted Floats:   ' + floatArray);
    BubbleSort.sort(floatArray);
    Sys.println('Sorted Floats:     ' + floatArray);
    Sys.println('Unsorted Strings:  ' + stringArray);
    BubbleSort.sort(stringArray);
    Sys.println('Sorted Strings:    ' + stringArray);
  }
}
Output:
Unsorted Integers: [1,10,2,5,-1,5,-19,4,23,0]
Sorted Integers:   [-19,-1,0,1,2,4,5,5,10,23]
Unsorted Floats:   [1,-3.2,5.2,10.8,-5.7,7.3,3.5,0,-4.1,-9.5]
Sorted Floats:     [-9.5,-5.7,-4.1,-3.2,0,1,3.5,5.2,7.3,10.8]
Unsorted Strings:  [We,hold,these,truths,to,be,self-evident,that,all,men,are,created,equal]
Sorted Strings:    [We,all,are,be,created,equal,hold,men,self-evident,that,these,to,truths]

HicEst

SUBROUTINE Bubble_Sort(a)
  REAL :: a(1)
 
  DO j = LEN(a)-1, 1, -1
    swapped = 0
    DO i = 1, j
      IF (a(i) > a(i+1)) THEN
        temp = a(i)
        a(i) = a(i+1)
        a(i+1) = temp
        swapped = 1
      ENDIF
    ENDDO
    IF (swapped == 0) RETURN
  ENDDO
END

Icon and Unicon

Icon/Unicon implementation of a bubble sort

procedure main()                     #: demonstrate various ways to sort a list and string
   demosort(bubblesort,[3, 14, 1, 5, 9, 2, 6, 3],"qwerty")
end

procedure bubblesort(X,op)           #: return sorted list 
local i,swapped
 
   op := sortop(op,X)                # select how and what we sort
 
   swapped := 1 
   while \swapped := &null do         # the sort
      every  i := 2 to *X do  
         if op(X[i],X[i-1]) then  
            X[i-1] :=: X[swapped := i] 
   return X
end
Output:
Sorting Demo using procedure bubblesort
  on list : [ 3 14 1 5 9 2 6 3 ]
    with op = &null:         [ 1 2 3 3 5 6 9 14 ]   (0 ms)
    with op = "numeric":     [ 1 2 3 3 5 6 9 14 ]   (0 ms)
    with op = "string":      [ 1 14 2 3 3 5 6 9 ]   (0 ms)
    with op = ">>":          [ 9 6 5 3 3 2 14 1 ]   (0 ms)
    with op = ">":           [ 14 9 6 5 3 3 2 1 ]   (0 ms)
    with op = procedure cmp: [ 1 2 3 3 5 6 9 14 ]   (1 ms)
    with op = "cmp":         [ 1 2 3 3 5 6 9 14 ]   (0 ms)
  on string : "qwerty"
    with op = &null:         "eqrtwy"   (0 ms)

The following code supports this and other sorting demonstrations.

  • Sorting illustrates a difference in the way Icon and Unicon handles data types. Built-in operators for comparing data types make a syntactic distinction between numeric and string types, and sorting structured and user-defined types require custom code. An added complication arises because mixed types are allowed. Two approaches are possible here: (1) that taken by the built-in sort which sorts first by type and then value The sort order of types is: &null, integer, real, string, cset, procedure, list, set, table, and record; and (2) Coercion of types which is used here (and implemented in 'sortop') to decide on using string or numeric sorting. These sorts will not handle more exotic type mixes.
  • The 'sortop' procedure allows various methods of comparison be selected including customized ones. The example could be made more general to deal with coercion of types like cset to string (admittedly an uninteresting example as csets are already sorted). Custom comparators are shown by and example procedure 'cmp'.
  • 'demosort' can apply different sorting procedures and operators to lists and strings to show how this works. The routines 'displaysort' and 'writex' are helpers.
invocable all                # for op

procedure sortop(op,X)                  #: select how to sort

    op := case op of {               
             "string":  "<<"
             "numeric": "<"
             &null:     if type(!X) == "string" then "<<" else "<"
             default:   op
          }
return proc(op, 2) | runerr(123, image(op))
end

procedure cmp(a,b)                    #: example custom comparison procedure
    return a < b                      #  Imagine a complex comparison test here!
end

procedure demosort(sortproc,L,s)      # demonstrate sort on L and s
 
    write("Sorting Demo using ",image(sortproc))
    writes("  on list : ")
    writex(L)
    displaysort(sortproc,L)           # default string sort
    displaysort(sortproc,L,"numeric") # explicit numeric sort
    displaysort(sortproc,L,"string")  # explicit string sort
    displaysort(sortproc,L,">>")      # descending string sort
    displaysort(sortproc,L,">")       # descending numeric sort
    displaysort(sortproc,L,cmp)       # ascending custom comparison
    displaysort(sortproc,L,"cmp")     # ascending custom comparison
 
    writes("  on string : ")
    writex(s)
    displaysort(sortproc,s)           # sort characters in a string
    write()
    return
end
 
procedure displaysort(sortproc,X,op)  #: helper to show sort behavior
local t,SX
    writes("    with op = ",left(image(op)||":",15))
    X := copy(X)
    t := &time
    SX := sortproc(X,op)
    writex(SX,"   (",&time - t," ms)")
    return 
end
 
procedure writex(X,suf[])             #: helper for displaysort
    if type(X) == "string" then 
        writes(image(X))
    else {
        writes("[")
        every writes(" ",image(!X))
        writes(" ]")
        }
    every writes(!suf)
    write()
return 
end

Io

List do(
  bubblesort := method(
    t := true
    while( t,
      t := false
      for( j, 0, self size - 2,
        if( self at( j ) start > self at( j+1 ) start,
          self swapIndices( j,j+1 )
          t := true
        )
      )
    )
    return( self )
  )
)

J

Generally, this task should be accomplished in J using /:~ list. Here we take an approach that's more comparable with the other examples on this page.
bubbleSort=:  (([ (<. , >.) {.@]) , }.@])/^:_

Test program:

   ?. 10 $ 10
4 6 8 6 5 8 6 6 6 9
   bubbleSort ?. 10 $ 10
4 5 6 6 6 6 6 8 8 9

For the most part, bubble sort works against J's strengths. However, once a single pass has been implemented as a list operation, ^:_ tells J to repeat this until the result stops changing.

Jakt

fn bubble_sort<T>(anon mut array: [T]) {
    mut item_count = array.size()
    mut has_changed = true
    while item_count > 1 and has_changed {
        has_changed = true
        item_count--
        for i in 0..item_count {
            if array[i] > array[i + 1] {
                let temp = array[i]
                array[i] = array[i + 1]
                array[i + 1] = temp
                has_changed = true
            }
        }
    }
}


fn main() {
    mut array = [7, 8, 9, 6, 5, 3, 1, 10, 4, 2]
    println("{}", array)
    bubble_sort(array)
    println("{}", array)
}

Janet

(defn bubble-sort!
  [arr]
  (def arr-len (length arr))
  (when (< arr-len 2)
    (break arr))
  # at this point there are two or more elements
  (loop [i :down-to [(dec arr-len) 0]]
    (for j 0 i
      (def left-elt (get arr j))
      (def right-elt (get arr (inc j)))
      (when (> left-elt right-elt)
        (put arr j right-elt)
        (put arr (inc j) left-elt))))
  arr)

(comment

  (let [n 100
        arr (seq [i :range [0 n]]
              (* n (math/random)))]
    (deep= (bubble-sort! (array ;arr))
           (sort (array ;arr))))
  # => true

  )

Java

Bubble sorting (ascending) an array of any Comparable type:

public static <E extends Comparable<? super E>> void bubbleSort(E[] comparable) {
    boolean changed = false;
    do {
        changed = false;
        for (int a = 0; a < comparable.length - 1; a++) {
            if (comparable[a].compareTo(comparable[a + 1]) > 0) {
                E tmp = comparable[a];
                comparable[a] = comparable[a + 1];
                comparable[a + 1] = tmp;
                changed = true;
            }
        }
    } while (changed);
}

For descending, simply switch the direction of comparison:

if (comparable[a].compareTo(comparable[b]) < 0){
   //same swap code as before
}

JavaScript

Array.prototype.bubblesort = function() {
    var done = false;
    while (!done) {
        done = true;
        for (var i = 1; i<this.length; i++) {
            if (this[i-1] > this[i]) {
                done = false;
                [this[i-1], this[i]] = [this[i], this[i-1]]
            }
        }
    }
    return this;
}
Works with: SEE version 3.0
Works with: OSSP js version 1.6.20070208
Array.prototype.bubblesort = function() {
  var done = false;
  while (! done) {
    done = true;
    for (var i = 1; i < this.length; i++) {
      if (this[i - 1] > this[i]) {
        done = false;
        var tmp = this[i - 1];
        this[i - 1] = this[i];
        this[i] = tmp;
      }
    }
  }
  return this;
}

Example:

var my_arr = ["G", "F", "C", "A", "B", "E", "D"];
my_arr.bubblesort();
print(my_arr);
Output:
 A,B,C,D,E,F,G

webpage version (for the rest of us):

<script>
Array.prototype.bubblesort = function() {
    var done = false;
    while (!done) {
        done = true;
        for (var i = 1; i<this.length; i++) {
            if (this[i-1] > this[i]) {
                done = false;
                [this[i-1], this[i]] = [this[i], this[i-1]]
            }
        }
    }
    return this;
}
var my_arr = ["G", "F", "C", "A", "B", "E", "D"];
my_arr.bubblesort();
	output='';
        for (var i = 0; i < my_arr.length; i++) {
		output+=my_arr[i];	
		if (i < my_arr.length-1) output+=',';
        }
document.write(output);
</script>

jq

def bubble_sort:
  def swap(i;j): .[i] as $x | .[i]=.[j] | .[j]=$x;

  # input/output: [changed, list]
  reduce range(0; length) as $i
    ( [false, .];
      if $i > 0 and (.[0]|not) then .
      else reduce range(0; (.[1]|length) - $i - 1) as $j
        (.[0] = false;
        .[1] as $list
        | if $list[$j] > $list[$j + 1] then [true, ($list|swap($j; $j+1))]
          else .
          end )
      end  ) | .[1] ;

Example:

(
 [3,2,1],
 [1,2,3],
 ["G", "F", "C", "A", "B", "E", "D"]
)  | bubble_sort
Output:
$ jq -c -n -f Bubble_sort.jq
[1,2,3]
[1,2,3]
["A","B","C","D","E","F","G"]

Julia

Works with: Julia version 0.6
function bubblesort!(arr::AbstractVector)
    for _ in 2:length(arr), j in 1:length(arr)-1
        if arr[j] > arr[j+1]
            arr[j], arr[j+1] = arr[j+1], arr[j]
        end
    end
    return arr
end

v = rand(-10:10, 10)
println("# unordered: $v\n -> ordered: ", bubblesort!(v))
Output:
# unordered: [7, 4, -1, -8, 8, -1, 5, 6, -3, -5]
 -> ordered: [-8, -5, -3, -1, -1, 4, 5, 6, 7, 8]

Kotlin

Translation of: Java
import java.util.Comparator

fun <T> bubbleSort(a: Array<T>, c: Comparator<T>) {
    var changed: Boolean
    do {
        changed = false
        for (i in 0..a.size - 2) {
            if (c.compare(a[i], a[i + 1]) > 0) {
                val tmp = a[i]
                a[i] = a[i + 1]
                a[i + 1] = tmp
                changed = true
            }
        }
    } while (changed)
}

Lambdatalk

{def bubblesort 
 {def bubblesort.swap!
  {lambda {:a :n :i}
   {if {> :i :n}
    then :a
    else {bubblesort.swap! {if {> {A.get :i :a} {A.get {+ :i 1} :a}}
                            then {A.set! :i {A.get {+ :i 1} :a} 
                                 {A.set! {+ :i 1} {A.get :i :a} :a}} 
                            else :a}
                           :n 
                           {+ :i 1}} }}}
 {def bubblesort.r
  {lambda {:a :n}
   {if {<= :n 1}
    then :a
    else {bubblesort.r {bubblesort.swap! :a :n 0} 
                       {- :n 1}} }}}

 {lambda {:a}
  {bubblesort.r :a {- {A.length :a} 1}}}}
-> bubblesort

{bubblesort {A.new 0  3 86 20 27 67 31 16 37 42  8 47  7 84  5 29}}
-> [0,3,5,7,8,16,20,27,29,31,37,42,47,67,84,86]

Lisaac

Section Header

+ name := BUBBLE_SORT;

- external := `#include <time.h>`;

Section Public

- main <- (
  + a : ARRAY(INTEGER);

  a := ARRAY(INTEGER).create 0 to 100;
  `srand(time(NULL))`;
  0.to 100 do { i : INTEGER;
    a.put `rand()`:INTEGER to i;
  };

  bubble a;

  a.foreach { item : INTEGER;
    item.print;
    '\n'.print;
  };
);

- bubble a : ARRAY(INTEGER) <- (
  + lower, size, t : INTEGER;
  + sorted : BOOLEAN;
  lower := a.lower;
  size := a.upper - lower + 1;
  {
    sorted := TRUE;
    size := size - 1;
    0.to (size - 1) do { i : INTEGER;
      (a.item(lower + i + 1) < a.item(lower + i)).if {
        t := a.item(lower + i + 1);
        a.put (a.item(lower + i)) to (lower + i + 1);
        a.put t to (lower + i);
        sorted := FALSE;
      };
    };
  }.do_while {!sorted};
);

Lua

function bubbleSort(A)
  local itemCount=#A
  local hasChanged
  repeat
    hasChanged = false
    itemCount=itemCount - 1
    for i = 1, itemCount do
      if A[i] > A[i + 1] then
        A[i], A[i + 1] = A[i + 1], A[i]
        hasChanged = true
      end
    end
  until hasChanged == false
end

Example:

list = { 5, 6, 1, 2, 9, 14, 2, 15, 6, 7, 8, 97 }
bubbleSort(list)
for i, j in pairs(list) do
    print(j)
end

Lucid

[1]

bsort(a) = if iseod(first a) then a else
              follow(bsort(allbutlast(b)),last(b)) fi
  where
   b = bubble(a);
   bubble(a) = smaller(max, next a)
       where
        max = first a fby larger(max, next a);
        larger(x,y) = if iseod(y) then y elseif x
       end;
   follow(x,y) = if xdone then y upon xdone else x fi
                   where
                      xdone = iseod x fby xdone or iseod x;
                   end;
   last(x) = (x asa iseod next x) fby eod;
   allbutlast(x) = if not iseod(next x) then x else eod fi;
  end

M2000 Interpreter

A=(1,2,3,4) is a pointer to an auto array. We can read one item Array(A,0)=1, or we can add 1 to all items A++, or add 5 to all items A+=5. We can link to standard interface, Link A to A() so now A(1)++ increment 2nd item by one. Print A print all items, one per column

A=Stack:=1,2,3,4 is a pointer to a stack object. We can read any item using StackItem(), from 1 (we can omit number 1 for first item, the top). Stack items can be move very fast, it is a linked list. To apply stack statements we have to make A as current stack (preserving current stack) using Stack A { }, so we can drop 2 items (1 and 2) using Stack A {Drop 2}. Print A print all items, one per column


Module Bubble {
      function bubblesort {
                  dim a()    
                  \\ []  is a stack object,  interpreter pass current stack pointer, and set a new stack for current stack
                  \\ array( stackobject ) get a stack object and return an array
                  a()=array([])
                  itemcount=len(a())
                   repeat {
                        haschange=false
                        if itemcount>1 then {
                              for index=0 to itemcount-2 {
                                  if a(index)>a(index+1) then swap a(index), a(index+1) : haschange=true
                              }
                        }
                       itemcount-- 
                   } until not haschange
                   =a()
      }
      \\ function can take parameters
      Print bubblesort(5,3,2,7,6,1)
      A=(2, 10, 17, 13, 20, 14, 3, 17, 16, 16)
      
      \\ !A copy values from array A to function stack
      B=bubblesort(!A)
      Print Len(A)=10 
      Print B
      \\ Print array  in descending order
      k=each(b, -1, 1)
      While k {
            Print Array(k),
      }
      \\ sort two arrays in one
      Print BubbleSort(!A, !B)
      \\ We can use a stack object,  and values pop from object
      Z=Stack:=2, 10, 17, 13, 20, 14, 3, 17, 16, 16
      Print Len(Z)=10
      Def GetStack(x)=Stack(x)
      Z1=GetStack(BubbleSort(!Z))
      Print Type$(Z1)="mStiva"
      Print Z1
      Print Len(Z1)
      Print Len(Z)=0  ' now Z is empty
}
Bubble

M4

divert(-1)

define(`randSeed',141592653)
define(`setRand',
   `define(`randSeed',ifelse(eval($1<10000),1,`eval(20000-$1)',`$1'))')
define(`rand_t',`eval(randSeed^(randSeed>>13))')
define(`random',
   `define(`randSeed',eval((rand_t^(rand_t<<18))&0x7fffffff))randSeed')

define(`set',`define(`$1[$2]',`$3')')
define(`get',`defn(`$1[$2]')')
define(`new',`set($1,size,0)')
dnl  for the heap calculations, it's easier if origin is 0, so set value first
define(`append',
   `set($1,size,incr(get($1,size)))`'set($1,get($1,size),$2)')

dnl  swap(<name>,<j>,<name>[<j>],<k>)  using arg stack for the temporary
define(`swap',`set($1,$2,get($1,$4))`'set($1,$4,$3)')

define(`deck',
   `new($1)for(`x',1,$2,
         `append(`$1',eval(random%100))')')
define(`show',
   `for(`x',1,get($1,size),`get($1,x) ')')
define(`for',
   `ifelse($#,0,``$0'',
   `ifelse(eval($2<=$3),1,
   `pushdef(`$1',$2)$4`'popdef(`$1')$0(`$1',incr($2),$3,`$4')')')')

define(`bubbleonce',
   `for(`x',1,$2,
      `ifelse(eval(get($1,x)>get($1,incr(x))),1,
         `swap($1,x,get($1,x),incr(x))`'1')')0')
define(`bubbleupto',
   `ifelse(bubbleonce($1,$2),0,
      `',
      `bubbleupto($1,decr($2))')')
define(`bubblesort',
   `bubbleupto($1,decr(get($1,size)))')

divert
deck(`a',10)
show(`a')
bubblesort(`a')
show(`a')
Output:
17 63 80 55 90 88 25 9 71 38

9 17 25 38 55 63 71 80 88 90

Maple

arr := Array([17,3,72,0,36,2,3,8,40,0]):
len := numelems(arr):
while(true) do
	change := false:
	len--;
	for i from 1 to len do
		if (arr[i] > arr[i+1]) then
			temp := arr[i]:
			arr[i] := arr[i+1]:
			arr[i+1] := temp:
			change := true:
		end if:
	end do:
	if (not change) then break end if:
end do:
arr;
Output:
[0,0,2,3,3,8,17,36,40,72]

Mathematica /Wolfram Language

Using pattern matching

bubbleSort[{w___, x_, y_, z___}] /; x > y := bubbleSort[{w, y, x, z}]
bubbleSort[sortedList_] := sortedList
bubbleSort[{10, 3, 7, 1, 4, 3, 8, 13, 9}]
Output:
{1, 3, 3, 4, 7, 8, 9, 10, 13}

Classic version

ClearAll[BubbleSort]
BubbleSort[in_List] := Module[{x = in, l = Length[in], swapped},
  swapped = True;
  While[swapped,
   swapped = False;
   Do[
    If[x[[i]] > x[[i + 1]],
     x[[{i, i + 1}]] //= Reverse;
     swapped = True;
     ]
    ,
    {i, l - 1}
    ];
   ];
  x
  ]
BubbleSort[{1, 12, 3, 7, 2, 8, 4, 7, 6}]
Output:
{1, 2, 3, 4, 6, 7, 7, 8, 12}

MATLAB

function list = bubbleSort(list)

    hasChanged = true;
    itemCount = numel(list);
    
    while(hasChanged)
        
        hasChanged = false;
        itemCount = itemCount - 1;
        
        for index = (1:itemCount)
  
            if(list(index) > list(index+1))
                list([index index+1]) = list([index+1 index]); %swap
                hasChanged = true;
            end %if
            
        end %for
    end %while
end %bubbleSort
Output:
bubbleSort([5 3 8 4 9 7 6 2 1])

ans =

     1     2     3     4     5     6     7     8     9

Maxima

bubble_sort(u) := block(
    [n: length(u), swapped: true, temp],
    while swapped do (
        swapped: false,
        for i: 1 thru n - 1 do (
            if u[i] > u[i + 1] then (
                temp: u[i],
                u[i]: u[i + 1],
                u[i + 1]: temp,
                swapped: true
            )
        )
    ),
    u
);
/* Example */
/* sample:[3,65,6,24,24,89,2,59,6]$
   bubble_sort(%);
   [2,3,6,6,24,24,59,65,89]
*/

MAXScript

fn bubbleSort arr =
(
    while true do
    (
        changed = false
        for i in 1 to (arr.count - 1) do
        (
            if arr[i] > arr[i+1] then
            (
                swap arr[i] arr[i+1]
                changed = true
            )
        )
        if not changed then exit
    )
    arr
)
-- Usage
myArr = #(9, 8, 7, 6, 5, 4, 3, 2, 1)
myArr = bubbleSort myArr

MMIX

Ja        IS $127

          LOC Data_Segment
DataSeg   GREG @
Array     IS @-Data_Segment
          OCTA   999,200,125,1,1020,40,4,5,60,100
ArrayLen  IS (@-Array-Data_Segment)/8

NL        IS  @-Data_Segment
	  BYTE #a,0
	  LOC  @+(8-@)&7

Buffer    IS @-Data_Segment


            LOC #1000
            GREG @
sorted      IS  $5
i           IS  $6
size        IS  $1
a           IS  $0
t           IS  $20
t1          IS  $21
t2          IS  $22
% Input: $0 ptr to array, $1 its length (in octabyte)
% Trashed: $5, $6, $1, $20, $21, $22
BubbleSort  SETL  sorted,1          % sorted = true
            SUB   size,size,1       % size--
            SETL  i,0               % i = 0
3H          CMP   t,i,size          % i < size ?
            BNN   t,1F              % if false, end for loop
            8ADDU $12,i,a           % compute addresses of the
            ADDU  t,i,1             % octas a[i] and a[i+1]
            8ADDU $11,t,a
            LDO   t1,$12,0          % get their values
            LDO   t2,$11,0
            CMP   t,t1,t2           % compare
            BN    t,2F              % if t1<t2, next
            STO   t1,$11,0          % else swap them
            STO   t2,$12,0
            SETL  sorted,0          % sorted = false
2H          INCL  i,1               % i++
            JMP   3B                % next (for loop)
1H          PBZ   sorted,BubbleSort % while sorted is false, loop
            GO    Ja,Ja,0
            
% Help function (Print an octabyte)
% Input:    $0 (the octabyte)
BufSize     IS    64
            GREG  @
PrintInt8   ADDU  t,DataSeg,Buffer  % get buffer address 
            ADDU  t,t,BufSize       % end of buffer
            SETL  t1,0              % final 0 for Fputs            
            STB   t1,t,0
1H          SUB   t,t,1             % t--
            DIV   $0,$0,10          % ($0,rR) = divmod($0,10)
            GET   t1,rR             % get reminder
            INCL  t1,'0'            % turn it into ascii digit
            STB   t1,t,0            % store it
            PBNZ  $0,1B             % if $0 /= 0, loop
            OR    $255,t,0          % $255 = t
            TRAP  0,Fputs,StdOut 
            GO    Ja,Ja,0           % print and return


Main        ADDU  $0,DataSeg,Array  % $0 = Array address
            SETL  $1,ArrayLen       % $1 = Array Len
            GO    Ja,BubbleSort     % BubbleSort it
            SETL  $4,ArrayLen       % $4 = ArrayLen
	    ADDU  $3,DataSeg,Array  % $3 = Array address
2H          BZ    $4,1F             % if $4 == 0, break
            LDO   $0,$3,0           % $0 = * ($3 + 0)
            GO    Ja,PrintInt8      % print the octa
            ADDU  $255,DataSeg,NL   % add a trailing newline
	    TRAP  0,Fputs,StdOut
            ADDU  $3,$3,8           % next octa
            SUB   $4,$4,1           % $4--
	    JMP   2B                % loop
1H          XOR   $255,$255,$255
            TRAP  0,Halt,0          % exit(0)

Modula-2

PROCEDURE BubbleSort(VAR a: ARRAY OF INTEGER);
  VAR
    changed:        BOOLEAN;
    temp, count, i: INTEGER;
BEGIN
  count := HIGH(a);
  REPEAT
    changed := FALSE;
    DEC(count);
    FOR i := 0 TO count DO
      IF a[i] > a[i+1] THEN
        temp := a[i];
        a[i] := a[i+1];
        a[i+1] := temp;
        changed := TRUE
      END
    END
  UNTIL NOT changed
END BubbleSort;

Modula-3

MODULE Bubble;

PROCEDURE Sort(VAR a: ARRAY OF INTEGER) =
  VAR sorted: BOOLEAN;
      temp, len: INTEGER := LAST(a);
  BEGIN
    WHILE NOT sorted DO
      sorted := TRUE;
      DEC(len);
      FOR i := FIRST(a) TO len DO
        IF a[i+1] < a[i] THEN
          temp := a[i];
          a[i] := a[i + 1];
          a[i + 1] := temp;
          sorted := FALSE;
        END;
      END;
    END;
  END Sort;
END Bubble.

N/t/roff

This program may output to paper (Postscript/PDF or actual printout) or a line-printer/terminal depending on the device specification.

This implementation is not reverse-compatible classical TROFF from Bell Labs, as TROFF then was extremely limited in what it could do. It will work with GNU Troff, though. The classical version of TROFF could only do recursive macro calls, which is integral to the functioning of .AREADLN, but not .while looping constructs, which is integral to the functioning of .ASORT; it could also only support numerical registers with name consisting of two characters maximum, so a register named A9 would be okay (2 characters), but not A123 (4 characters).

Block comments start with .ig and end with ... Single-line comments begin with \"

Works with: GROFF (GNU Troff) version 1.22.2
.ig
Bubble sort algorithm in Troff
==============================

:For: Rosetta Code
:Author: Stephanie Björk (Katt)
:Date: December 1, 2017
..
.ig
Array implementation: \(*A
---------------------------
This is an array implementation that takes advantage of Troff's numerical
registers.  Registers ``Ax``, where ``x`` is a base-10 Hindu-Arabic numeral and
0 < ``x`` < \(if, are used by array \(*A.  The array counter which holds the
number of items in the array is stored in register ``Ac``.  This array
implementation is one-indexed (array elements count from 1), though it could be
hardcoded again to become zero-indexed depending on what the programmer favours.
..
.nr Ac 0 1 \" Array counter
.
.de APUSH
.nr A\\n+(Ac \\$1
.. \" de APUSH
.
.de AREADLN
.APUSH \\$1
.if \\n(.$>1 \{ \
.	shift
.	AREADLN \\$*
\} \" if \\n(.$>1
.. \" de AREADLN
.
.de ASWAP
.nr tmp \\n[A\\$1]
.nr A\\$1 \\n[A\\$2]
.nr A\\$2 \\n[tmp]
.rm tmp
.. \" de ASWAP
.
.de ASORT
.nr swapped 1
.nr Ad \\n(Ac+1
.while \\n[swapped] \{ \
.	nr swapped 0
.	nr Ai 1
.	nr Ad -1
.	while \\n(Ai<\\n(Ad \{ \
.		nr Aj \\n(Ai+1
.		if \\n[A\\n(Ai]>\\n[A\\n(Aj] \{ \
.			ASWAP \\n(Ai \\n(Aj
.			nr swapped 1
\} \" if \\n[A\\n(Ai]>\\n[A\\n(Aj]
.		nr Ai +1
\} \" while \\n(Ai<\\n(Ac
\} \" while \\n[swapped]
.. \" de ASORT
.
.ig
Begin Program
-------------
The program's procedural body.  Here, we push all our potentially-unsorted
integer tokens sequentially, call a subroutine to sort them, and print all the
sorted items.
..
.AREADLN 12 87 23 77 0 66 45 92 3 0 2 1 9 9 5 4 4 4 \" Our input items to sort.
.ASORT \" Sort all items in the array.
.
.\" Output sorted items
.nr Ai 0 1
.while \n(Ai<\n(Ac \n[A\n+[Ai]]

Output

0 0 1 2 3 4 4 4 5 9 9 12 23 45 66 77 87 92

Nanoquery

Translation of: Python
def bubble_sort(seq)
	changed = true

	while changed
		changed = false
		for i in range(0, len(seq) - 2)
			if seq[i] > seq[i + 1]
				temp = seq[i]
				seq[i] = seq[i + 1]
				seq[i + 1] = temp
				changed = true
			end
		end
	end
	
	return seq
end

if main
	import Nanoquery.Util; random = new(Random)

	testset = list(range(0, 99))
	testset = random.shuffle(testset)
	println testset + "\n"
	
	testset = bubble_sort(testset)
	println testset
end
Output:
[97, 22, 91, 60, 79, 3, 1, 2, 18, 65, 85, 88, 40, 0, 56, 94, 67, 28, 17, 55, 71, 83, 77, 44, 80, 12, 13, 14, 54, 7, 4, 5, 59, 6, 43, 62, 21, 73, 45, 30, 66, 47, 10, 35, 11, 76, 34, 58, 96, 26, 15, 49, 84, 86, 29, 16, 69, 61, 9, 50, 25, 42, 23, 63, 99, 8, 51, 46, 53, 82, 48, 31, 36, 33, 19, 87, 37, 81, 39, 92, 24, 89, 41, 52, 93, 90, 72, 64, 70, 32, 27, 78, 68, 74, 38, 57, 98, 75, 20, 95]

[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99]

Nemerle

Functional

using System;
using System.Console;

module Bubblesort
{
    Bubblesort[T] (x : list[T]) : list[T]
      where T : IComparable
    {
        def isSorted(y)
        {
            |[_] => true
            |y1::y2::ys => (y1.CompareTo(y2) < 0) && isSorted(y2::ys)
        }
        
        def sort(y)
        {
            |[y]        => [y]
            |y1::y2::ys => if (y1.CompareTo(y2) < 0) y1::sort(y2::ys)
                           else y2::sort(y1::ys)
        }
        
        def loop(y)
        {
            if (isSorted(y)) y else {def z = sort(y); loop(z)}            
        }
        
        match(x)
        {
            |[]  => []
            |_   => loop(x)
        }
    }
    
    Main() : void
    {
        def empty = [];
        def single = [2];
        def several = [2, 6, 1, 7, 3, 9, 4];
        WriteLine(Bubblesort(empty));
        WriteLine(Bubblesort(single));
        WriteLine(Bubblesort(several));
    }
}

Imperative

Translation of: C#

We use an array for this version so that we can update in place. We could use a C# style list (as in the C# example), but that seemed too easy to confuse with a Nemerle style list.

using System;
using System.Console;

module Bubblesort
{
    public static Bubblesort[T](this x : array[T]) : void
      where T : IComparable
    {
        mutable changed = false;
        def ln = x.Length;
        
        do
        {
            changed = false;
            foreach (i in [0 .. (ln - 2)])
            {
                when (x[i].CompareTo(x[i + 1]) > 0)
                {
                    x[i] <-> x[i + 1];
                    changed = true;
                }
            }
        } while (changed);
    }
    
    Main() : void
    {
        def several = array[2, 6, 1, 7, 3, 9, 4];
        several.Bubblesort();
        foreach (i in several)
            Write($"$i  ");
    }
}

NetRexx

/* NetRexx */
options replace format comments java crossref savelog symbols binary

placesList = [String -
    "UK  London",     "US  New York"   -
  , "US  Boston",     "US  Washington" -
  , "UK  Washington", "US  Birmingham" -
  , "UK  Birmingham", "UK  Boston"     -
]
sortedList = bubbleSort(String[] Arrays.copyOf(placesList, placesList.length))

lists = [placesList, sortedList]
loop ln = 0 to lists.length - 1
  cl = lists[ln]
  loop ct = 0 to cl.length - 1
    say cl[ct]
    end ct
    say
  end ln

return

method bubbleSort(list = String[]) public constant binary returns String[]

listLen = list.length
loop i_ = 0 to listLen - 1
  loop j_ = i_ + 1 to listLen - 1
    if list[i_].compareTo(list[j_]) > 0 then do
      tmpstor  = list[j_]
      list[j_] = list[i_]
      list[i_] = tmpstor
      end
    end j_
  end i_

return list
Output:
UK  London
US  New York
US  Boston
US  Washington
UK  Washington
US  Birmingham
UK  Birmingham
UK  Boston

UK  Birmingham
UK  Boston
UK  London
UK  Washington
US  Birmingham
US  Boston
US  New York
US  Washington

Translation of Pseudocode

This version is a direct implementation of this task's pseudocode.

/* NetRexx */
options replace format comments java crossref savelog symbols binary

placesList = [String -
    "UK  London",     "US  New York"   -
  , "US  Boston",     "US  Washington" -
  , "UK  Washington", "US  Birmingham" -
  , "UK  Birmingham", "UK  Boston"     -
]
sortedList = bubbleSort(String[] Arrays.copyOf(placesList, placesList.length))

lists = [placesList, sortedList]
loop ln = 0 to lists.length - 1
  cl = lists[ln]
  loop ct = 0 to cl.length - 1
    say cl[ct]
    end ct
    say
  end ln

return

method bubbleSort(item = String[]) public constant binary returns String[]

hasChanged = boolean
itemCount = item.length
loop label h_ until \hasChanged
  hasChanged  = isFalse
  itemCount = itemCount - 1
  loop index = 0 to itemCount - 1
    if item[index].compareTo(item[index + 1]) > 0 then do
      swap            = item[index]
      item[index]     = item[index + 1]
      item[index + 1] = swap
      hasChanged      = isTrue
      end
    end index
  end h_

return item

method isTrue public constant binary returns boolean
  return 1 == 1

method isFalse public constant binary returns boolean
  return \isTrue

Nim

proc bubbleSort[T](a: var openarray[T]) =
  var t = true
  for n in countdown(a.len-2, 0):
    if not t: break
    t = false
    for j in 0..n:
      if a[j] <= a[j+1]: continue
      swap a[j], a[j+1]
      t = true

var a = @[4, 65, 2, -31, 0, 99, 2, 83, 782]
bubbleSort a
echo a
Output:
@[-31, 0, 2, 2, 4, 65, 83, 99, 782]

Oberon-2

MODULE Bubble;

IMPORT Out;

TYPE
  TItem = INTEGER;
  
VAR
  I:LONGINT;
  A:ARRAY 10 OF TItem;
  
PROCEDURE Init(VAR A:ARRAY OF TItem);
BEGIN
  A[0] := 1; A[1] := 10; A[2] := 2; A[3] := 5;
  A[4] := -1; A[5] := 5; A[6] := -19; A[7] := 4;
  A[8] := 23; A[9] := 0;
END Init;

PROCEDURE Swap(VAR A,B:TItem);
VAR
  Temp:TItem;
BEGIN
  Temp := A;
  A := B;
  B := Temp;
END Swap;

PROCEDURE BubbleSort(VAR A:ARRAY OF TItem);
VAR
  N,Newn,I:LONGINT;
BEGIN
  N := LEN(A)-1;
  REPEAT
    Newn := 0;
    FOR I := 1 TO N DO
      IF A[I-1] > A[I] THEN
	Swap(A[I-1], A[I]);
	Newn := I;
      END;
    END;
    N := Newn;
  UNTIL N = 0;
END BubbleSort;

BEGIN
  Init(A);
  Out.String("Before sorting: "); Out.Ln;
  FOR I := 0 TO LEN(A)-1 DO Out.Int(A[I],0); Out.Char(' '); END;
  Out.Ln;
  BubbleSort(A); 
  Out.String("After sorting: "); Out.Ln;  
  FOR I := 0 TO LEN(A)-1 DO Out.Int(A[I],0); Out.Char(' '); END;
  Out.Ln; 
END Bubble.
Output:
Before sorting: 
1 10 2 5 -1 5 -19 4 23 0 
After sorting: 
-19 -1 0 1 2 4 5 5 10 23 

Objeck

Translation of: C
function : Swap(p : Int[]) ~ Nil {
  t := p[0];
  p[0] := p[1];
  p[1] := t;
}
 
function : Sort(a : Int[]) ~ Nil {
  do {
    sorted := true;
    size -= 1;
    for (i:=0; i<a->Size(); i+=1;) {
      if (a[i+1] < a[i]) {
        swap(a+i);
        sorted := 0;
      };
    };
  } 
  while (sorted = false);
}

Objective-C

- (NSArray *) bubbleSort:(NSMutableArray *)unsorted {
    BOOL done = false;
    
    while (!done) {
        done = true;
        for (int i = 1; i < unsorted.count; i++) {
            if ( [[unsorted objectAtIndex:i-1] integerValue] > [[unsorted objectAtIndex:i] integerValue] ) {
                [unsorted exchangeObjectAtIndex:i withObjectAtIndex:i-1];
                done = false;
            }
        }
    }
    
    return unsorted;
}

OCaml

Like the Haskell versions above:

This version checks for changes in a separate step for simplicity.

let rec bsort s =
  let rec _bsort = function
    | x :: x2 :: xs when x > x2 ->
        x2 :: _bsort (x :: xs)
    | x :: x2 :: xs ->
        x :: _bsort (x2 :: xs)
    | s -> s
  in
  let t = _bsort s in
    if t = s then t
    else bsort t

This version uses the polymorphic option type to designate unchanged lists. (The type signature of _bsort is now 'a list -> 'a list option.) It is slightly faster than the previous one.

let rec bsort s =
  let rec _bsort = function
    | x :: x2 :: xs when x > x2 -> begin
        match _bsort (x :: xs) with
          | None -> Some (x2 :: x :: xs)
          | Some xs2 -> Some (x2 :: xs2)
      end
    | x :: x2 :: xs -> begin
        match _bsort (x2 :: xs) with
          | None -> None
          | Some xs2 -> Some (x :: xs2)
      end
    | _ -> None
  in
    match _bsort s with
      | None -> s
      | Some s2 -> bsort s2

Octave

function s = bubblesort(v)
  itemCount = length(v);
  do
    hasChanged = false;
    itemCount--;
    for i = 1:itemCount
      if ( v(i) > v(i+1) )
	v([i,i+1]) = v([i+1,i]);  % swap
	hasChanged = true;
      endif
    endfor
  until(hasChanged == false)
  s = v;
endfunction
v = [9,8,7,3,1,100];
disp(bubblesort(v));

Ol

(define (bubble-sort x ??)
   (define (sort-step l)
      (if (or (null? l) (null? (cdr l)))
         l
         (if (?? (car l) (cadr l))
            (cons (cadr l) (sort-step (cons (car l) (cddr l))))
            (cons (car  l) (sort-step (cdr l))))))
   (let loop ((i x))
      (if (equal? i (sort-step i))
         i
         (loop (sort-step i)))))

(print 
   (bubble-sort (list 1 3 5 9 8 6 4 3 2) >))
(print 
   (bubble-sort (iota 100) >))
(print 
   (bubble-sort (iota 100) <))
Output:
(1 2 3 3 4 5 6 8 9)
(0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99)
(99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0)

ooRexx

Reimplementation of NetRexx

Translation of: NetRexx

This version exploits the "Collection Classes" and some other features of the language that are only available in Open Object Rexx.

/* Rexx */
Do
  placesList = sampleData()
  call show placesList
  say
  sortedList = bubbleSort(placesList)
  call show sortedList
  say

  return
End
Exit

-- -----------------------------------------------------------------------------
bubbleSort:
procedure
Do
  il = arg(1)
  sl = il~copy

  listLen = sl~size
  loop i_ = 1 to listLen
    loop j_ = i_ + 1 to listLen
      cmpi = sl[i_]
      cmpj = sl[j_]
      if cmpi > cmpj then do
        sl[i_] = cmpj
        sl[j_] = cmpi
        end
      end j_
    end i_
  return sl
End
Exit

-- -----------------------------------------------------------------------------
show:
procedure
Do
  al = arg(1)

  loop e_ over al
    say e_
    end e_
  
  return
End
Exit

-- -----------------------------------------------------------------------------
sampleData:
procedure
Do
  placesList = .array~of( ,
    "UK  London",     "US  New York",   "US  Boston",     "US  Washington", ,
    "UK  Washington", "US  Birmingham", "UK  Birmingham", "UK  Boston"      ,
    )

  return placesList
End
Exit
Output:
UK  London
US  New York
US  Boston
US  Washington
UK  Washington
US  Birmingham
UK  Birmingham
UK  Boston

UK  Birmingham
UK  Boston
UK  London
UK  Washington
US  Birmingham
US  Boston
US  New York
US  Washington

Translation of Pseudocode

This version is a direct implementation of this task's pseudocode.

/* Rexx */
Do
  placesList = sampleData()
  call show placesList
  say
  sortedList = bubbleSort(placesList)
  call show sortedList
  say

  return
End
Exit

-- -----------------------------------------------------------------------------
bubbleSort:
procedure
Do
  il = arg(1)
  sl = il~copy
  itemCount = sl~size

  loop label c_ until \hasChanged
    hasChanged = isFalse()
    itemCount = itemCount - 1
    loop i_ = 1 to itemCount
      if sl[i_] > sl[i_ + 1] then do
        t_         = sl[i_]
        sl[i_]     = sl[i_ + 1]
        sl[i_ + 1] = t_
        hasChanged = isTrue()
        end
      end i_
    end c_

  return sl
End
Exit

-- -----------------------------------------------------------------------------
show:
procedure
Do
  al = arg(1)

  loop e_ over al
    say e_
    end e_
  
  return
End
Exit

-- -----------------------------------------------------------------------------
sampleData:
procedure
Do
  placesList = .array~of( ,
    "UK  London",     "US  New York",   "US  Boston",     "US  Washington", ,
    "UK  Washington", "US  Birmingham", "UK  Birmingham", "UK  Boston"      ,
    )

  return placesList
End
Exit

-- -----------------------------------------------------------------------------
isTrue: procedure
  return (1 == 1)

-- -----------------------------------------------------------------------------
isFalse: procedure
  return \isTrue()

Classic Rexx Implementation

A more "traditional" implementation of version 1 using only Rexx primitive constructs. This version has been tested with the Open Object Rexx and Regina Rexx interpreters and could equally have been exhibited as a Rexx solution.

/* Rexx */
Do
  placesList. = ''
  sortedList. = ''
  call sampleData
  call bubbleSort

  do i_ = 1 to placesList.0
    say placesList.i_
    end i_
  say

  do i_ = 1 to sortedList.0
    say sortedList.i_
    end i_
  say

  return
End
Exit

/* -------------------------------------------------------------------------- */
bubbleSort:
procedure expose sortedList. placesList.
Do
  /* Copy list */
  do !_ = 0 to placesList.0
    sortedList.!_ = placesList.!_
    end !_

  listLen = sortedList.0
  do i_ = 1 to listLen
    do j_ = i_ + 1 to listLen
      if sortedList.i_ > sortedList.j_ then do
        !_            = sortedList.j_
        sortedList.j_ = sortedList.i_
        sortedList.i_ = !_
        end
      end j_
    end i_
  return
End
Exit

/* -------------------------------------------------------------------------- */
sampleData:
procedure expose placesList.
Do
  ! = 0
  ! = ! + 1; placesList.0 = !; placesList.! = "UK  London"
  ! = ! + 1; placesList.0 = !; placesList.! = "US  New York"
  ! = ! + 1; placesList.0 = !; placesList.! = "US  Boston"
  ! = ! + 1; placesList.0 = !; placesList.! = "US  Washington"
  ! = ! + 1; placesList.0 = !; placesList.! = "UK  Washington"
  ! = ! + 1; placesList.0 = !; placesList.! = "US  Birmingham"
  ! = ! + 1; placesList.0 = !; placesList.! = "UK  Birmingham"
  ! = ! + 1; placesList.0 = !; placesList.! = "UK  Boston"

  return
End
Exit

Oz

In-place sorting of mutable arrays:

declare
  proc {BubbleSort Arr}
     proc {Swap I J}
        Arr.J := (Arr.I := Arr.J) %% assignment returns the old value
     end
     IsSorted = {NewCell false}
     MaxItem = {NewCell {Array.high Arr}-1}
  in
     for until:@IsSorted do
        IsSorted := true
        for I in {Array.low Arr}..@MaxItem do
           if Arr.I > Arr.(I+1) then
              IsSorted := false
              {Swap I I+1}
           end
        end
        MaxItem := @MaxItem - 1
     end
  end
  Arr = {Tuple.toArray unit(10 9 8 7 6 5 4 3 2 1)}
in
  {BubbleSort Arr}
  {Inspect Arr}

Purely-functional sorting of immutable lists:

declare
  local
     fun {Loop Xs Changed ?IsSorted}
        case Xs
        of X1|X2|Xr andthen X1 > X2 then
           X2|{Loop X1|Xr true IsSorted}
        [] X|Xr then
           X|{Loop Xr Changed IsSorted}
        [] nil then
           IsSorted = {Not Changed}
           nil
        end
     end
  in
     fun {BubbleSort Xs}
        IsSorted
        Result = {Loop Xs false ?IsSorted}
     in
        if IsSorted then Result
        else {BubbleSort Result}
        end
     end
  end
in
  {Show {BubbleSort [3 1 4 1 5 9 2 6 5]}}

PARI/GP

bubbleSort(v)={
  for(i=1,#v-1,
    for(j=i+1,#v,
      if(v[j]<v[i],
        my(t=v[j]);
        v[j]=v[i];
        v[i]=t
      )
    )
  );
  v
};

Pascal

procedure bubble_sort(var list: array of real);
var
  i, j, n: integer;
  t: real;
begin
  n := length(list);
  for i := n downto 2 do
    for j := 0 to i - 1 do
      if list[j] > list[j + 1] then
      begin
        t := list[j];
        list[j] := list[j + 1];
        list[j + 1] := t;
      end;
end;

Usage:

var
  list: array[0 .. 9] of real;
// ...
bubble_sort(list);

PascalABC.NET

procedure bubbleSort<T>(a: array of T); where T: IComparable<T>;
begin
  var swapped: boolean;
  repeat
    swapped := False;
    for var i := 0 to a.Count - 2 do
      if a[i].CompareTo(a[i + 1]) > 0 then
      begin
        swap(a[i], a[i + 1]);
        swapped := True;
      end;
  until not swapped;
end;

begin
  var a := |4, 65, 2, -31, 0, 99, 2, 83, 782|;
  bubbleSort(a);
  writeln(a);
  var b := 'gcdbafeb'.toarray;
  bubblesort(b);
  writeln(b);
end.
Output:
[-31,0,2,2,4,65,83,99,782]
[a,b,b,c,d,e,f,g]

Pebble

;bubble sort example for x86 DOS
;compiles to 549 bytes com file

program examples\bubble

data

	int sorting[0]
	int index[0]
	int size[10]
	int temp1[0]
	int temp2[0]

	int@ list[10]

begin

	call fill
	call sort
	call output

	pause
	kill

end

sub fill

	0 [index]

	label loopfill

		echo "Enter value #" \
		echo [index]
		echo ": " \

		input @list{[index]}

		+1 [index]

	if [index] < [size] then loopfill

ret

sub sort

	label loopsort

		0 [sorting]

		0 [index]

		label process

			[temp1] = [index] + 1

			if @list{[index]} > @list{[temp1]} then

				[temp2] = @list{[index]}

				@list{[index]} = @list{[temp1]}
				@list{[temp1]} = [temp2]

				[sorting] = 1

			endif

			+1 [index]

		if [index] < [size] - 1 then process

	if [sorting] = 1 then loopsort

ret

sub output

	0 [index]

	label loopoutput

		echo [index]
		echo " : " \
		echo @list{[index]}
		crlf

		+1 [index]

	if [index] < [size] then loopoutput

ret

Perl

# Sorts an array in place
sub bubble_sort {
    for my $i (0 .. $#_){
        for my $j ($i + 1 .. $#_){
            $_[$j] < $_[$i] and @_[$i, $j] = @_[$j, $i];
        }
    }
}

Usage:

my @a = (39, 25, 30, 28, 36, 72, 98, 25, 43, 38);
bubble_sort(@a);

Phix

with javascript_semantics

function bubble_sort(sequence s)
    s = deep_copy(s)
    for j=length(s) to 1 by -1 do
        integer changed = 0
        for i=1 to j-1 do
            object si = s[i],
                   sn = s[i+1]
            if si>sn then
                s[i] = sn
                s[i+1] = si
                changed = 1
            end if
        end for
        if changed=0 then exit end if
    end for
    return s
end function
 
constant s = {4, 15, "delta", 2, -31, 0, "alfa", 19, "gamma", 2, 13, "beta", 782, 1}
 
puts(1,"Before: ")
?s
puts(1,"After: ")
?bubble_sort(s)
Output:
Before: {4,15,"delta",2,-31,0,"alpha",19,"gamma",2,13,"beta",782,1}
After: {-31,0,1,2,2,4,13,15,19,782,"alpha","beta","delta","gamma"}

PHP

function bubbleSort(array $array){
    foreach($array as $i => &$val){
        foreach($array as $k => &$val2){
            if($k <= $i)
                continue;
            if($val > $val2) {
                list($val, $val2) = [$val2, $val];
                break;
            }
        }
    }
    return $array;
}

PicoLisp

(de bubbleSort (Lst)
   (use Chg
      (loop
         (off Chg)
         (for (L Lst (cdr L) (cdr L))
            (when (> (car L) (cadr L))
               (xchg L (cdr L))
               (on Chg) ) )
         (NIL Chg Lst) ) ) )

PL/I

/* A primitive bubble sort */
bubble_sort: procedure (A);
   declare A(*) fixed binary;
   declare temp fixed binary;
   declare i fixed binary, no_more_swaps bit (1) aligned;

   do until (no_more_swaps);
      no_more_swaps = true;
      do i = lbound(A,1) to hbound(A,1)-1;
         if A(i) > A(i+1) then
            do; temp = A(i); A(i) = A(i+1); A(i+1) = temp;
                no_more_swaps = false;
            end;
      end;
   end;
end bubble_sort;

Pop11

define bubble_sort(v);
lvars n=length(v), done=false, i;
while not(done) do
   true -> done;
   n - 1 -> n;
   for i from 1 to n do
      if v(i) > v(i+1) then
         false -> done;
         ;;; Swap using multiple assignment
         (v(i+1), v(i)) -> (v(i), v(i+1));
      endif;
   endfor;
endwhile;
enddefine;

;;; Test it
vars ar = { 10 8 6 4 2 1 3 5 7 9};
bubble_sort(ar);
ar =>

PostScript

/bubblesort{
/x exch def
/temp x x length 1 sub get def
/i x length 1 sub def
/j i 1 sub def

x length 1 sub{
i 1 sub{
x j 1 sub get x j get lt
{
/temp x j 1 sub get def
x j 1 sub x j get put
x j temp put
}if
/j j 1 sub def
}repeat
/i i 1 sub def
/j i 1 sub def
}repeat
x pstack
}def

PowerShell

function bubblesort ($a) {
    $l = $a.Length
    $hasChanged = $true
    while ($hasChanged) {
        $hasChanged = $false
        $l--
        for ($i = 0; $i -lt $l; $i++) {
            if ($a[$i] -gt $a[$i+1]) {
                $a[$i], $a[$i+1] = $a[$i+1], $a[$i]
                $hasChanged = $true
            }
        }
    }
}

Prolog

It's surprisingly easy in Prolog while coding this sort, to accidentally create a sort that is similar, but not identical to the bubble sort algorithm. Some of these are easier and shorter to code and work as well if not better. Having said that, it's difficult to think of a reason to code the bubble sort these days except as an example of inefficiency.

%___________________________________________________________________________
% Bubble sort

bubble(0, Res, Res, sorted).
bubble(Len, [A,B|T], Res, unsorted) :- A > B, !, bubble(Len,[B,A|T], Res, _).
bubble(Len, [A|T], [A|Ts], Ch) :- L is Len-1, bubble(L, T, Ts, Ch).

bubblesort(In, Out) :- length(In, Len), bubblesort(Len, In, Out).
bubblesort(0, In, In).
bubblesort(Len, In, Out) :-
	bubble(Len, In, Bubbled, SortFlag),  % bubble the list
	(SortFlag=sorted -> Out=Bubbled;     % list is already sorted
	 SegLen is Len - 1,		     % one fewer to process
	 writef('bubbled=%w\n', [Bubbled]),  % show progress
	 bubblesort(SegLen, Bubbled, Out)).

test :-  In = [8,9,1,3,4,2,6,5,4],
	 writef('  input=%w\n', [In]),
	 bubblesort(In, R),
	 writef('-> %w\n', [R]).

for example:

?- test.
  input=[8,9,1,3,4,2,6,5,4]
bubbled=[8,1,3,4,2,6,5,4,9]
bubbled=[1,3,4,2,6,5,4,8,9]
bubbled=[1,3,2,4,5,4,6,8,9]
bubbled=[1,2,3,4,4,5,6,8,9]
-> [1,2,3,4,4,5,6,8,9]
true.

Alternative version

Should be ISO (but tested only with GNU Prolog). Note: doesn't constuct list for each swap, only for each pass.

:- initialization(main).


bubble_sort(Xs,Res) :-
    write(Xs), nl
  , bubble_pass(Xs,Ys,Changed)
  , ( Changed == true -> bubble_sort(Ys,Res) ; Res = Xs )
  .

bubble_pass(Xs,Res,Changed) :-
    Xs = [X|Ys], Ys = [Y|Zs]
  , ( X > Y -> H = Y, T = [X|Zs], Changed = true
             ; H = X, T = Ys
    )
  , Res = [H|R], !, bubble_pass(T,R,Changed)
  ; Res = Xs
  .


test([8,9,1,3,4,2,6,5,4]).

main :- test(T), bubble_sort(T,_), halt.
Output:
[8,9,1,3,4,2,6,5,4]
[8,1,3,4,2,6,5,4,9]
[1,3,4,2,6,5,4,8,9]
[1,3,2,4,5,4,6,8,9]
[1,2,3,4,4,5,6,8,9]

Python

def bubble_sort(seq):
    """Inefficiently sort the mutable sequence (list) in place.
       seq MUST BE A MUTABLE SEQUENCE.

       As with list.sort() and random.shuffle this does NOT return 
    """
    changed = True
    while changed:
        changed = False
        for i in range(len(seq) - 1):
            if seq[i] > seq[i+1]:
                seq[i], seq[i+1] = seq[i+1], seq[i]
                changed = True
    return seq

if __name__ == "__main__":
   """Sample usage and simple test suite"""

   from random import shuffle

   testset = [_ for _ in range(100)]
   testcase = testset.copy() # make a copy
   shuffle(testcase)
   assert testcase != testset  # we've shuffled it
   bubble_sort(testcase)
   assert testcase == testset  # we've unshuffled it back into a copy

Quackery

  [ stack ]                  is sorted (       --> s )
 
  [ rot tuck over peek
    2swap tuck over peek
    dip rot 2dup < iff
      [ dip [ unrot poke ]
        swap rot poke 
        sorted release 
        false sorted put ] 
    else 
      [ drop 2drop nip ] ]   is >exch  ( [ n n --> [ )
  
  [ dup size 1 - times
     [ true sorted put
       i 1+ times 
         [ i^ dup 1+ >exch ] 
       sorted take if 
         conclude ] ]        is bubble (     [ --> [ )
 
  [] 20 times
    [ 10 random join ]
  say "Before: " dup echo cr
  say "After:  " bubble echo
Output:
Before: [ 5 2 5 0 4 5 1 5 1 1 0 3 7 2 0 9 6 1 8 7 ]
After:  [ 0 0 0 1 1 1 1 2 2 3 4 5 5 5 5 6 7 7 8 9 ]


Qi

(define bubble-shot
  [A]     -> [A]
  [A B|R] -> [B|(bubble-shot [A|R])] where (> A B)
  [A  |R] -> [A|(bubble-shot R)])

(define bubble-sort
  X -> (fix bubble-shot X))

(bubble-sort [6 8 5 9 3 2 2 1 4 7])

R

The previously solution missed out on a cool R trick for swapping items and had no check for lists of length 1. As R is 1-indexed, we have aimed to be as faithful as we can to the given pseudo-code.

bubbleSort <- function(items)
{
  repeat
  {
    if((itemCount <- length(items)) <= 1) return(items)
    hasChanged <- FALSE
    itemCount <- itemCount - 1
    for(i in seq_len(itemCount))
    {
      if(items[i] > items[i + 1])
      {
        items[c(i, i + 1)] <- items[c(i + 1, i)]#The cool trick mentioned above.
        hasChanged <- TRUE  
      }
    }
    if(!hasChanged) break
  }
  items
}
#Examples taken from the Haxe solution.
ints <- c(1, 10, 2, 5, -1, 5, -19, 4, 23, 0)
numerics <- c(1, -3.2, 5.2, 10.8, -5.7, 7.3, 3.5, 0, -4.1, -9.5)
strings <- c("We", "hold", "these", "truths", "to", "be", "self-evident", "that", "all", "men", "are", "created", "equal")
Output:
> bubbleSort(ints)
 [1] -19  -1   0   1   2   4   5   5  10  23
> bubbleSort(numerics)
 [1] -9.5 -5.7 -4.1 -3.2  0.0  1.0  3.5  5.2  7.3 10.8
> bubbleSort(strings)
 [1] "all"          "are"          "be"           "created"      "equal"        "hold"         "men"         
 [8] "self-evident" "that"         "these"        "to"           "truths"       "We"

Ra

class BubbleSort
	**Sort a list with the Bubble Sort algorithm**
	
	on start
		
		args := program arguments
		.sort(args)
		print args
	
	define sort(list) is shared
		**Sort the list**
		
		test
			list := [4, 2, 7, 3]
			.sort(list)
			assert list = [2, 3, 4, 7]
		
		body
			last := list.count - 1
			
			post while changed
				
				changed := false
				
				for i in last
					
					if list[i] > list[i + 1]
						temp := list[i]
						list[i] := list[i + 1]
						list[i + 1] := temp
						changed := true

Racket

This bubble sort sorts the elelement in the vector v with regard to <?.

#lang racket

(define (bubble-sort <? v)
  (define len (vector-length v))
  (define ref vector-ref)
  (let loop ([max len] 
             [again? #f])
    (for ([i (in-range 0 (- max 1))]
          [j (in-range 1 max)])
      (define vi (ref v i))
      (when (<? (ref v j) vi)
        (vector-set! v i (ref v j))
        (vector-set! v j vi)
        (set! again? #t)))
    (when again? (loop (- max 1) #f)))
  v)

Example: Sorting a vector of length 10 with random entries.

(bubble-sort < (for/vector ([_ 10]) (random 20)))

Raku

(formerly Perl 6)

Works with: Rakudo version #24 "Seoul"
sub bubble_sort (@a) {
    for ^@a -> $i {
        for $i ^..^ @a -> $j {
            @a[$j] < @a[$i] and @a[$i, $j] = @a[$j, $i];
        }
    }
}

REXX

version 0, alpha-numeric vertical list

This REXX version sorts (using a bubble sort) and displays an array   (of alpha-numeric items)   in a vertical list.

/*REXX program sorts an array  (of any kind of items)  using the  bubble─sort algorithm.*/
call gen                                         /*generate the array elements  (items).*/
call show   'before sort'                        /*show the  before  array elements.    */
     say copies('▒', 70)                         /*show a separator line (before/after).*/
call bSort         #                             /*invoke the bubble sort  with # items.*/
call show   ' after sort'                        /*show the  after   array elements.    */
exit                                             /*stick a fork in it,  we're all done. */
/*──────────────────────────────────────────────────────────────────────────────────────*/
bSort: procedure expose @.;  parse arg n         /*N: is the number of @ array elements.*/
         do m=n-1  by -1  until ok;         ok=1 /*keep sorting the  @ array until done.*/
           do j=1  for m;  k=j+1;  if @.j<=@.k  then iterate       /*elements in order? */
           _=@.j;  @.j=@.k;  @.k=_;         ok=0 /*swap two elements;  flag as not done.*/
           end   /*j*/
         end     /*m*/;        return
/*──────────────────────────────────────────────────────────────────────────────────────*/
gen: @.=;         @.1 = '---letters of the Hebrew alphabet---' ;   @.13= "kaph    [kaf]"
                  @.2 = '====================================' ;   @.14= "lamed"
                  @.3 = 'aleph   [alef]'                       ;   @.15= "mem"
                  @.4 = 'beth    [bet]'                        ;   @.16= "nun"
                  @.5 = 'gimel'                                ;   @.17= "samekh"
                  @.6 = 'daleth  [dalet]'                      ;   @.18= "ayin"
                  @.7 = 'he'                                   ;   @.19= "pe"
                  @.8 = 'waw     [vav]'                        ;   @.20= "sadhe   [tsadi]"
                  @.9 = 'zayin'                                ;   @.21= "qoph    [qof]"
                  @.10= 'heth    [het]'                        ;   @.22= "resh"
                  @.11= 'teth    [tet]'                        ;   @.23= "shin"
                  @.12= 'yod'                                  ;   @.24= "taw     [tav]"
        do #=1  until @.#=='';  end;      #=#-1  /*determine #elements in list; adjust #*/
     return
/*──────────────────────────────────────────────────────────────────────────────────────*/
show:   do j=1  for #; say '     element' right(j,length(#)) arg(1)":"  @.j; end;   return
output   when using the internal array list:


(Shown at   5/6   size.)

     element  1 before sort: ---letters of the Hebrew alphabet---
     element  2 before sort: ====================================
     element  3 before sort: aleph   [alef]
     element  4 before sort: beth    [bet]
     element  5 before sort: gimel
     element  6 before sort: daleth  [dalet]
     element  7 before sort: he
     element  8 before sort: waw     [vav]
     element  9 before sort: zayin
     element 10 before sort: heth    [het]
     element 11 before sort: teth    [tet]
     element 12 before sort: yod
     element 13 before sort: kaph    [kaf]
     element 14 before sort: lamed
     element 15 before sort: mem
     element 16 before sort: nun
     element 17 before sort: samekh
     element 18 before sort: ayin
     element 19 before sort: pe
     element 20 before sort: sadhe   [tsadi]
     element 21 before sort: qoph    [qof]
     element 22 before sort: resh
     element 23 before sort: shin
     element 24 before sort: taw     [tav]
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
     element  1  after sort: ---letters of the Hebrew alphabet---
     element  2  after sort: ====================================
     element  3  after sort: aleph   [alef]
     element  4  after sort: ayin
     element  5  after sort: beth    [bet]
     element  6  after sort: daleth  [dalet]
     element  7  after sort: gimel
     element  8  after sort: he
     element  9  after sort: heth    [het]
     element 10  after sort: kaph    [kaf]
     element 11  after sort: lamed
     element 12  after sort: mem
     element 13  after sort: nun
     element 14  after sort: pe
     element 15  after sort: qoph    [qof]
     element 16  after sort: resh
     element 17  after sort: sadhe   [tsadi]
     element 18  after sort: samekh
     element 19  after sort: shin
     element 20  after sort: taw     [tav]
     element 21  after sort: teth    [tet]
     element 22  after sort: waw     [vav]
     element 23  after sort: yod
     element 24  after sort: zayin

version 1, random integers, horizontal list

This REXX version sorts (using a bubble sort) and displays a random array of numbers   (amount is specifiable from the command line)   in a horizontal list.

Programming note:   a check was made to not exceed REXX's upper range limit of the   random   BIF.

/*REXX program sorts an array (of any kind of numbers)  using the bubble─sort algorithm.*/
parse arg N .;   if N=='' | N==","  then N=30    /*obtain optional size of array from CL*/
call gen  N                                      /*generate the array elements (items). */
call show        'before sort:'                  /*show the   before   array elements.  */
call bSort  N                                    /*invoke the bubble sort  with N items.*/
call show        ' after sort:'                  /*show the   after    array elements.  */
exit                                             /*stick a fork in it,  we're all done. */
/*──────────────────────────────────────────────────────────────────────────────────────*/
bSort: procedure expose @.;  parse arg n         /*N: is the number of @ array elements.*/
       do m=n-1  by -1  until ok;     ok=1       /*keep sorting the  @ array until done.*/
           do j=1  for m;   k=j+1;  if @.j>@.k  then parse value @.j @.k 0 with @.k @.j ok
           end   /*j*/                           /* [↑]  swap 2 elements, flag as ¬done.*/
       end       /*m*/;      return
/*──────────────────────────────────────────────────────────────────────────────────────*/
gen:   h=min(N+N,1e5);  w=length(h);      do j=1  for N;  @.j=random(h);  end;      return
show:  parse arg $;  do k=1  for N;  $=$  right(@.k, w);         end;     say $;    return
output   when using a internally generated random array of thirty integers   (which are right-justified for alignment in the display):
before sort: 20 57 49 20 31 51 37  1  8  0 38 42 33 41  5 23 34 60 10 15 60 54 36 13 25 24 59  3 35 10
 after sort:  0  1  3  5  8 10 10 13 15 20 20 23 24 25 31 33 34 35 36 37 38 41 42 49 51 54 57 59 60 60

version 2, random integers, horizontal list

Translation of: PL/I
/*REXX*/
Call random ,,1000
Do i=1 To 10
  a.i=random(20)
  End
a.0=i-1
Call show 'vorher '
Call bubble_sort
Call show 'nachher'
Exit
bubble_sort: Procedure Expose a.
  Do Until no_more_swaps
    no_more_swaps=1
    Do i=1 To a.0-1
      i1=i+1
      if a.i > a.i1 Then Do
        temp=a.i; a.i=a.i1; a.i1=temp
        no_more_swaps=0
      End
   End
  End
Return
show:
  l=''; Do i=1 To a.0; l=l a.i; End; Say arg(1)':'l
  Return
Output:
vorher : 9 17 16 19 5 7 3 20 16 0
nachher: 0 3 5 7 9 16 16 17 19 20

version 3, random integers, horizontal list, with interim plots

This REXX program is a modified version of the first REXX program, with produces a snapshot of the plot in progress.

The random number generation uses the numbers from     1 ───► N     (in sequential order),   and then those numbers
are randomized.   This is done to make the displaying of the plot symmetric   (a straight upward diagonal slope).

Note that the command to clear the terminal screen is hard-coded as:   CLS

Also note that only four snapshots of the sort-in-progress is shown here,   the REXX program will show a snapshot of every
sorting pass;   the       at   (about)   nnn% sorted       was added after-the-fact.

/*REXX program sorts an array (of any kind of numbers)  using the bubble─sort algorithm.*/
parse arg N seed .                               /*obtain optional size of array from CL*/
if N=='' | N==","       then N=30                /*Not specified?  Then use the default.*/
if datatype(seed, 'W')  then call random ,,seed  /*An integer?  Use the seed for RANDOM.*/
call gen    N                                    /*generate the array elements (items). */
call show        'before sort:'                  /*show the   before   array elements.  */
              $$= $                              /*keep "before" copy for after the sort*/
call bSort  N                                    /*invoke the bubble sort  with N items.*/
          say $$
call show        ' after sort:'                  /*show the   after    array elements.  */
exit                                             /*stick a fork in it,  we're all done. */
/*──────────────────────────────────────────────────────────────────────────────────────*/
bSort: procedure expose @.;  parse arg #         /*N: is the number of @ array elements.*/
       call disp                                 /*show a snapshot of the unsorted array*/
       do m=#-1  by -1  until ok;    ok=1        /*keep sorting the  @ array until done.*/
           do j=1  for m;   k=j+1
           if @.j>@.k  then do;     parse value    @.j  @.k  0      with      @.k  @.j  ok
                            end
           end   /*j*/                           /* [↑]  swap 2 elements, flag as ¬done.*/
       call disp                                 /*show snapshot of partially sorted @. */
       end       /*m*/;      return
/*──────────────────────────────────────────────────────────────────────────────────────*/
gen:   do j=1  for N;  @.j= j;  end
       do k=1  for N;  g= random(1,N);  parse value @.k @.g  with  @.g @.k;  end;   return
/*──────────────────────────────────────────────────────────────────────────────────────*/
show:  parse arg $;  do k=1  for N;  $=$  right(@.k, length(N));  end;     say $;   return
/*──────────────────────────────────────────────────────────────────────────────────────*/
disp:  'CLS';    $.=                             /*"CLS" is the command to clear screen.*/
                     do e=1  for #;         $.e= '│'overlay("☼", $.e, @.e);     end  /*e*/
                     do s=#  for #  by -1;  say $.s;                            end  /*s*/
       say "└"copies('─', #)                     /*display the horizontal axis at bottom*/
       return
output   when using the default input:
│                 ☼
│                    ☼
│        ☼                                             
│         ☼
│ ☼
│                ☼
│                      ☼
│               ☼
│☼
│     ☼
│            ☼
│                       ☼                                 at 0% sorted  
│                  ☼
│       ☼
│    ☼
│                     ☼
│                   ☼
│      ☼
│             ☼
│           ☼
│   ☼
│              ☼
│  ☼
│          ☼
└────────────────────────
│                             ☼
│                            ☼
│                           ☼
│                          ☼
│                         ☼
│                        ☼
│                       ☼
│                      ☼
│                     ☼
│     ☼
│                    ☼
│                   ☼
│            ☼
│                  ☼                                     at about 25% sorted
│                 ☼
│                ☼
│  ☼
│         ☼
│               ☼
│              ☼
│   ☼
│             ☼
│           ☼
│          ☼
│        ☼
│       ☼
│      ☼
│    ☼
│☼
│ ☼
└──────────────────────────────
│                             ☼
│                            ☼
│                           ☼
│                          ☼
│                         ☼
│                        ☼
│                       ☼
│                      ☼
│                     ☼
│                    ☼
│                   ☼
│                  ☼
│                 ☼
│                ☼
│               ☼                                        at about 50% sorted
│              ☼
│     ☼
│             ☼
│            ☼
│           ☼
│          ☼
│         ☼
│        ☼
│  ☼
│       ☼
│      ☼
│    ☼
│   ☼
│ ☼
│☼
└──────────────────────────────
│                             ☼
│                            ☼
│                           ☼
│                          ☼
│                         ☼
│                        ☼
│                       ☼
│                      ☼
│                     ☼
│                    ☼
│                   ☼
│                  ☼
│                 ☼                                     at 100% sorted
│                ☼
│               ☼
│              ☼
│             ☼
│            ☼
│           ☼
│          ☼
│         ☼
│        ☼
│       ☼
│      ☼
│     ☼
│    ☼
│   ☼
│  ☼
│ ☼
│☼
└──────────────────────────────
 

before sort: 11  3 15  4 12 14  7 20 22  5  8 19 24 13  6  1 16 23 17  2 10  9 21 18
 after sort:  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Ring

bubbleList = [4,2,1,3]
flag = 0
bubbleSort(bubbleList)
see bubbleList

func bubbleSort A
     n = len(A)
     while flag = 0
           flag = 1
           for i = 1 to n-1 
               if A[i] > A[i+1]
                  temp = A[i]
                  A[i] = A[i+1]
                  A[i+1] = temp
                  flag = 0
                ok
            next
      end

RPL

The bubble algorithm is slow by construction, but since its RPL implementation uses basic stack handling, it is actually quicker than algorithms that work directly on the array.

Works with: Halcyon Calc version 4.2.7
IF DUP SIZE 2 ≥ THEN
     LIST→ → len 
     ≪ len 1 FOR n 
           1 n 1 - START 
              IF DUP2 > THEN SWAP END 
              n ROLLD 
           NEXT 
           n ROLLD   
       -1 STEP
       len →LIST
     ≫  
END

Ruby

Generally, this task should be accomplished in Ruby using Array.sort!. Here we take an approach that's more comparable with the other examples on this page.

This example adds the bubblesort! method to the Array object. Below are two different methods that show four different iterating constructs in ruby.

class Array
  def bubblesort1!
    length.times do |j|
      for i in 1...(length - j)
        if self[i] < self[i - 1]
          self[i], self[i - 1] = self[i - 1], self[i]
        end
      end
    end
    self
  end
   def bubblesort2!
    each_index do |index|
      (length - 1).downto( index ) do |i|
        self[i-1], self[i] = self[i], self[i-1] if self[i-1] < self[i]
      end
    end
    self
  end
end
ary = [3, 78, 4, 23, 6, 8, 6]
ary.bubblesort1!
p ary
# => [3, 4, 6, 6, 8, 23, 78]

Rust

fn bubble_sort<T: Ord>(values: &mut[T]) {
    let mut n = values.len();
    let mut swapped = true;

    while swapped {
        swapped = false;

        for i in 1..n {
            if values[i - 1] > values[i] {
                values.swap(i - 1, i);
                swapped = true;
            }
        }

        n = n - 1;
    }
}

fn main() {
    // Sort numbers.
    let mut numbers = [8, 7, 1, 2, 9, 3, 4, 5, 0, 6];
    println!("Before: {:?}", numbers);

    bubble_sort(&mut numbers);
    println!("After: {:?}", numbers);

    // Sort strings.
    let mut strings = ["empty", "beach", "art", "car", "deal"];
    println!("Before: {:?}", strings);

    bubble_sort(&mut strings);
    println!("After: {:?}", strings);
}

Sather

class SORT{T < $IS_LT{T}} is
  private swap(inout a, inout b:T) is
    temp ::= a;
    a := b;
    b := temp;
  end;
  bubble_sort(inout a:ARRAY{T}) is
    i:INT;
    if a.size < 2 then return; end;
    loop
      sorted ::= true;
      loop i := 0.upto!(a.size - 2);
        if a[i+1] < a[i] then
          swap(inout a[i+1], inout a[i]);
          sorted := false;
        end;
      end;
      until!(sorted);
    end;
  end;
end;
class MAIN is
  main is
    a:ARRAY{INT} := |10, 9, 8, 7, 6, -10, 5, 4|;
    SORT{INT}::bubble_sort(inout a);
    #OUT + a + "\n";
  end;
end;

This should be able to sort (in ascending order) any object for which is_lt (less than) is defined.

Scala

Library: Scala

This slightly more complex version of Bubble Sort avoids errors with indices.

def bubbleSort[T](arr: Array[T])(implicit o: Ordering[T]) {
  import o._
  val consecutiveIndices = (arr.indices, arr.indices drop 1).zipped
  var hasChanged = true
  do {
    hasChanged = false
    consecutiveIndices foreach { (i1, i2) =>
      if (arr(i1) > arr(i2)) {
        hasChanged = true
        val tmp = arr(i1)
        arr(i1) = arr(i2)
        arr(i2) = tmp
      }
    }
  } while(hasChanged)
}
import scala.annotation.tailrec

def bubbleSort(xt: List[Int]) = {
  @tailrec
  def bubble(xs: List[Int], rest: List[Int], sorted: List[Int]): List[Int] = xs match {
    case x :: Nil =>
      if (rest.isEmpty) x :: sorted
      else bubble(rest, Nil, x :: sorted)
    case a :: b :: xs =>
      if (a > b) bubble(a :: xs, b :: rest, sorted)
      else       bubble(b :: xs, a :: rest, sorted)
  }
  bubble(xt, Nil, Nil)
}

Scheme

(define (bubble-sort x gt?)
  (letrec
    ((fix (lambda (f i)
       (if (equal? i (f i))
           i
           (fix f (f i)))))

     (sort-step (lambda (l)
        (if (or (null? l) (null? (cdr l)))
            l
            (if (gt? (car l) (cadr l))
                (cons (cadr l) (sort-step (cons (car l) (cddr l))))
                (cons (car  l) (sort-step (cdr l))))))))

  (fix sort-step x)))

This solution recursively finds the fixed point of sort-step. A comparison function must be passed to bubblesort. Example usages:

(bubble-sort (list 1 3 5 9 8 6 4 2) >)
(bubble-sort (string->list "Monkey") char<?)

Here is the same function, using a different syntax:

(define (bsort l gt?)
  (define (dosort l)
    (cond ((null? (cdr l))
           l)
          ((gt? (car l) (cadr l))
           (cons (cadr l) (dosort (cons (car l) (cddr l)))))
          (else 
           (cons (car l) (dosort (cdr l))))))
  (let ((try (dosort l)))
    (if (equal? l try)
        l
        (bsort try gt?))))

For example, you could do

(bsort > '(2 4 6 2))
(1 2 3)

Scilab

function b=BubbleSort(a)
  n=length(a)
  swapped=%T
  while swapped
    swapped=%F
    for i=1:1:n-1
      if a(i)>a(i+1) then
        temp=a(i)
        a(i)=a(i+1)
        a(i+1)=temp
        swapped=%T
      end
    end
  end
  b=a
endfunction BubbleSort
Output:
-->y=[5 4 3 2 1]
 y  =
     5.    4.    3.    2.    1.  
-->x=BubbleSort(a) 
 x  =
     1.    2.    3.    4.    5.  

Scratch

This solution is hosted at the Scratch site, because it is difficult to document visual programming solutions directly here at Rosetta Code. There you can see the solution results as well as examine the code. This solution is intended to illustrate the Bubble sort algorithm rather than to maximize performance. Scratch provides visual queues to indicate list access, and these are used to help show what is happening.

Seed7

const proc: bubbleSort (inout array elemType: arr) is func
  local
    var boolean: swapped is FALSE;
    var integer: i is 0;
    var elemType: help is elemType.value;
  begin
    repeat
      swapped := FALSE;
      for i range 1 to length(arr) - 1 do
        if arr[i] > arr[i + 1] then
          help := arr[i];
          arr[i] := arr[i + 1];
          arr[i + 1] := help;
          swapped := TRUE;
        end if;
      end for;
    until not swapped;
  end func;

Original source: [2]

Shen

Bubble sort a vector in-place, using the < operator for comparison.

(tc +)

(define swap
  { (vector number) --> number --> number --> (vector number) }
  A I1 I2 -> (let Z (<-vector A I1)
               (do (vector-> A I1 (<-vector A I2))
                   (vector-> A I2 Z))))

(define one-pass
  { (vector number) --> number --> boolean --> number --> boolean }
  A N Swapped N -> (do (if (> (<-vector A (- N 1)) (<-vector A N))
                           (swap A (- N 1) N))
                       Swapped)
  A N Swapped I -> (if (> (<-vector A (- I 1)) (<-vector A I))
                       (do (swap A (- I 1) I)
                           (one-pass A N true (+ I 1)))
                       (one-pass A N Swapped (+ I 1))))

(define bubble-h
  { boolean --> (vector number) --> number --> (vector number) }
  true A N -> (bubble-h (one-pass A N false 2) A N)
  false A N -> A)

(define bubble-sort
  { (vector number) --> (vector number) }
  A -> (let N (limit A)
         (bubble-h (one-pass A N false 2) A N)))
(datatype some-globals

  __________
  (value *arr*) : (vector number);)

(set *arr* (vector 5))
(vector-> (value *arr*) 1 5)
(vector-> (value *arr*) 2 1)
(vector-> (value *arr*) 3 4)
(vector-> (value *arr*) 4 2)
(vector-> (value *arr*) 5 8)
(bubble-sort (value *arr*))

Here is a more idiomatic implementation:

Translation of: Qi
(tc +)

(define bubble-shot
  { (vector number) --> (vector number) }
  (@v A <>) -> (@v A <>)
  (@v A B R) -> (@v B (bubble-shot (@v A R))) where (> A B)
  (@v A R) -> (@v A (bubble-shot R)))

(define bubble-sort
  { (vector number) --> (vector number) }
  X -> (fix (function bubble-shot) X))
(bubble-sort (@v 5 1 4 2 3 <>))

Sidef

func bubble_sort(arr) {
    loop {
        var swapped = false
        { |i|
            if (arr[i] > arr[i+1]) {
                arr[i, i+1] = arr[i+1, i]
                swapped = true
            }
        } << ^arr.end
        swapped || break
    }
    return arr
}

Simula

BEGIN

    PROCEDURE BUBBLESORT(A); NAME A; INTEGER ARRAY A;
    BEGIN
       INTEGER LOW, HIGH, I;
       BOOLEAN SWAPPED;

       PROCEDURE SWAP(I, J); INTEGER I, J;
       BEGIN
           INTEGER TEMP;
           TEMP := A(I); A(I) := A(J); A(J) := TEMP;
       END**OF**SWAP;

       LOW := LOWERBOUND(A, 1);
       HIGH := UPPERBOUND(A, 1);
       SWAPPED := TRUE;
       WHILE SWAPPED DO
       BEGIN
         SWAPPED := FALSE;
         FOR I := LOW + 1 STEP 1 UNTIL HIGH DO
         BEGIN
           COMMENT IF THIS PAIR IS OUT OF ORDER ;
           IF A(I - 1) > A(I) THEN
           BEGIN
             COMMENT SWAP THEM AND REMEMBER SOMETHING CHANGED ;
             SWAP(I - 1, I);
             SWAPPED := TRUE;
           END;
         END;
       END;
    END**OF**BUBBLESORT;

    INTEGER ARRAY A(1:10);
    INTEGER I, N;
    I := 1;
    FOR N := 6, 8, 5, 9, 3, 2, 2, 1, 4, 7 DO
    BEGIN
        A(I) := N; I := I + 1;
    END;
    BUBBLESORT(A);
    FOR I:= 1 STEP 1 UNTIL 10 DO
        OUTINT(A(I), 5);
    OUTIMAGE;

END;
Output:
    1    2    2    3    4    5    6    7    8    9

Smalltalk

A straight translation from the pseudocode above. Swap is done with a block closure.

|item swap itemCount hasChanged|
item := #(1 4 5 6 10 8 7 61 0 -3) copy.
swap := 
	[:indexOne :indexTwo| 
	|temp|
	temp := item at: indexOne.
	item at: indexOne put: (item at: indexTwo).
	item at: indexTwo put: temp].

itemCount := item size.
[hasChanged := false.
itemCount := itemCount - 1.
1 to: itemCount do:
	[:index | 
	(item at: index) > (item at: index + 1) ifTrue:
		[swap value: index value: index + 1.
		hasChanged := true]].
hasChanged] whileTrue.

SNOBOL4

*       # Sort array in place, return array
        define('bubble(a,alen)i,j,ub,tmp') :(bubble_end)
bubble  i = 1; ub = alen
outer   gt(ub,1) :f(bdone)
        j = 1
inner   le(a<j>, a<j + 1>) :s(incrj)
        tmp = a<j>
        a<j> = a<j + 1>
        a<j + 1> = tmp
incrj   j = lt(j + 1,ub) j + 1 :s(inner)
        ub = ub - 1 :(outer)
bdone   bubble = a :(return)
bubble_end

*       # Fill array with test data
        str = '33 99 15 54 1 20 88 47 68 72'
        output = str; arr = array(10)
floop   i = i + 1; str span('0123456789') . arr<i> = :s(floop)

*       # Test and display
        bubble(arr,10); str = ''
sloop   j = j + 1; str = str arr<j> ' ' :s(sloop)
        output = trim(str)
end
Output:
33 99 15 54 1 20 88 47 68 72
1 15 20 33 47 54 68 72 88 99

SPARK

Works with: SPARK GPL version 2010

The first version is based on the Ada version, with Integer for both the array index and the array element.

Static analysis of this code shows that it is guaranteed free of any run-time error when called from any other SPARK code.

package Bubble
is

   type Arr is array(Integer range <>) of Integer;

   procedure Sort (A : in out Arr);
   --# derives A from *;

end Bubble;


package body Bubble
is
   procedure Sort (A : in out Arr)
   is
      Finished : Boolean;
      Temp     : Integer;
   begin
      if A'Last /= A'First then
         loop
            Finished := True;
            for J in Integer range A'First .. A'Last - 1 loop
               if A (J + 1) < A (J) then
                  Finished := False;
                  Temp := A (J + 1);
                  A (J + 1) := A (J);
                  A (J) := Temp;
               end if;
            end loop;
            --# assert A'Last /= A'First;
            exit when Finished;
         end loop;
      end if;
   end Sort;

end Bubble;

The next version has a postcondition to guarantee that the returned array is sorted correctly. This requires the two proof rules that follow the source. The Ada code is identical with the first version.

package Bubble
is
   
   type Arr is array(Integer range <>) of Integer;

   --  Sorted is a proof function with the definition:
   --    Sorted(A, From_I, To_I)
   --      <->
   --    (for all I in Integer range From_I .. To_I - 1 =>
   --               (A(I) <= A(I + 1))) .
   --
   --# function Sorted (A            : Arr;
   --#                  From_I, To_I : Integer) return Boolean;
   
   procedure Sort (A : in out Arr);
   --# derives A from *;
   --# post Sorted(A, A'First, A'Last);
   
end Bubble;


package body Bubble
is
   procedure Sort (A : in out Arr)
   is
      Finished : Boolean;
      Temp     : Integer;
   begin
      if A'Last > A'First then
         loop
            Finished := True;
            for J in Integer range A'First .. A'Last - 1
            --# assert Finished -> Sorted(A, A'First, J);
            loop
               if A (J + 1) < A (J) then
                  Finished := False;
                  Temp := A (J + 1);
                  A (J + 1) := A (J);
                  A (J) := Temp;
               end if;
            end loop;
            --# assert A'Last /= A'First
            --#   and  (Finished -> Sorted(A, A'First, A'Last));
            exit when Finished;
         end loop;
      end if;
   end Sort;
   
end Bubble;

The proof rules are stated here without justification (but they are fairly obvious). A formal proof of these rules from the definition of Sorted has been completed.

bubble_sort_rule(1): sorted(A, I, J)
                       may_be_deduced_from
                     [ J <= I ] .

bubble_sort_rule(2): Fin -> sorted(A, I, J + 1)
                       may_be_deduced_from
                     [ Fin -> sorted(A, I, J),
                       element(A, [J]) <= element(A, [J + 1]) ] .

Both of the two versions above use an inner loop that scans over all the array on every pass of the outer loop. This makes the proof in the second version very simple.

The final version scans over a reducing portion of the array in the inner loop, consequently the proof becomes more complex. The package specification for this version is the same as the second version above. The package body defines two more proof functions.

package body Bubble
is
   procedure Sort (A : in out Arr)
   is
      Finished : Boolean;

      --  In_Position is a proof function with the definition:
      --    In_Position(A, A_Start, A_I, A_End)
      --      <->
      --    ((for all K in Integer range A_Start .. A_I - 1 =>
      --                (A(K) <= A(A_I)))
      --     and
      --     Sorted(A, A_I, A_End) .
      --
      --# function In_Position (A                  : Arr;
      --#                       A_Start, A_I, A_End : Integer) return Boolean;

      --  Swapped is a proof function with the definition:
      --    Swapped(A_In, A_Out, I1, I2)
      --      <->
      --    (A_Out = A_In[I1 => A_In(I2); I2 => A_In(I1)]).
      --
      --# function Swapped (A_In, A_Out : Arr;
      --#                   I1, I2      : Integer) return Boolean;

      procedure Swap (A  : in out Arr;
                      I1 : in     Integer;
                      I2 : in     Integer)
      --# derives A from *, I1, I2;
      --# pre  I1 in A'First .. A'Last
      --#  and I2 in A'First .. A'Last;
      --# post Swapped(A~, A, I1, I2);
      is
         Temp : Integer;
      begin
         Temp  := A(I2);
         A(I2) := A(I1);
         A(I1) := Temp;
      end Swap;
      pragma Inline (Swap);

   begin
      if A'Last > A'First then
         for I in reverse Integer range A'First + 1 .. A'Last loop
            Finished := True;
            for J in Integer range A'First .. I - 1 loop
               if A (J + 1) < A (J) then
                  Finished := False;
                  Swap (A, J, J + 1);
               end if;
               --# assert I% = I  --  I is unchanged by execution of the loop
               --#   and  (for all K in Integer range A'First .. J =>
               --#                    (A(K) <= A(J + 1)))
               --#   and  (I < A'Last -> In_Position(A, A'First, I + 1, A'Last))
               --#   and  (Finished -> Sorted(A, A'First, J + 1));
            end loop;
            exit when Finished;
            --# assert In_Position(A, A'First, I, A'Last);
         end loop;
      end if;
   end Sort;

end Bubble;

Completion of the proof of this version requires more rules than the previous version and they are rather more complex. Creation of these rules is quite straightforward - I tend to write whatever rules the Simplifier needs first and then validate them afterwards. A formal proof of these rules from the definition of Sorted, In_Position and Swapped has been completed.

bubble_sort_rule(1):  sorted(A, I, J)
                        may_be_deduced_from
                      [ J <= I ] .

bubble_sort_rule(2):  sorted(A, I - 1, J)
                        may_be_deduced_from
                      [ sorted(A, I, J),
                        element(A, [I - 1]) <= element(A, [I]) ] .

bubble_sort_rule(3):  Fin -> sorted(A, I, J + 1)
                        may_be_deduced_from
                      [ Fin -> sorted(A, I, J),
                        element(A, [J]) <= element(A, [J + 1]) ] .

bubble_sort_rule(4):  sorted(A, Fst, Lst)
                        may_be_deduced_from
                      [ sorted(A, Fst, I),
                        I < Lst -> in_position(A, Fst, I + 1, Lst),
                        I <= Lst ] .

bubble_sort_rule(5):  in_position(A, Fst, I, Lst)
                        may_be_deduced_from
                      [ I < Lst -> in_position(A, Fst, I + 1, Lst),
                        for_all(K : integer, Fst <= K and K <= I - 1
                                  -> element(A, [K]) <= element(A, [I])),
                        I >= Fst,
                        I <= Lst ] .

bubble_sort_rule(6):  I < Lst -> in_position(A2, Fst, I + 1, Lst)
                        may_be_deduced_from
                      [ I < Lst -> in_position(A1, Fst, I + 1, Lst),
                        swapped(A1, A2, J + 1, J + 2),
                        J + 2 < I + 1,
                        J >= Fst ] .

bubble_sort_rule(7):  I - 1 < Lst -> in_position(A2, Fst, I, Lst)
                        may_be_deduced_from
                      [ in_position(A1, Fst, I, Lst),
                        swapped(A1, A2, J, J + 1),
                        J + 1 < I,
                        J >= Fst ] .

bubble_sort_rule(8):  for_all(K : integer, I <= K and K <= I
                                 -> element(A, [K]) <= element(A, [I + 1]))
                        may_be_deduced_from
                      [ element(A, [I]) <= element(A, [I + 1]) ] .

bubble_sort_rule(9):  for_all(K : integer, I <= K and K <= I
                                 -> element(A2, [K]) <= element(A2, [I + 1]))
                        may_be_deduced_from
                      [ element(A1, [I]) > element(A1, [I + 1]),
                        swapped(A1, A2, I, I + 1) ] .

bubble_sort_rule(10): for_all(K2 : integer, Fst <= K2 and K2 <= J + 1
                                 -> element(A, [K2]) <= element(A, [J + 2]))
                        may_be_deduced_from
                      [ for_all(K1 : integer, Fst <= K1 and K1 <= J
                                   -> element(A, [K1]) <= element(A, [J + 1])),
                        element(A, [J + 1]) <= element(A, [J + 2]) ] .

bubble_sort_rule(11): for_all(K2 : integer, Fst <= K2 and K2 <= J + 1
                                 -> element(A2, [K2]) <= element(A2, [J + 2]))
                        may_be_deduced_from
                      [ for_all(K1 : integer, Fst <= K1 and K1 <= J
                                   -> element(A1, [K1]) <= element(A1, [J + 1])),
                        element(A1, [J + 1]) > element(A1, [J + 2]),
                        swapped(A1, A2, J + 1, J + 2) ] .
Works with: SPARK GPL version 2014

File bubble.ads:

package Bubble with SPARK_Mode is

   type Arr is array (Integer range <>) of Integer;
   
   function Sorted (A : Arr) return Boolean is 
     (for all I in A'First .. A'Last - 1 => A(I) <= A(I + 1))
       with 
         Ghost,
         Pre => A'Last > Integer'First;
      
   function Bubbled (A : Arr) return Boolean is 
     (for all I in A'First .. A'Last - 1 => A(I) <= A(A'Last))
       with 
         Ghost,
         Pre => A'Last > Integer'First;
	 
   procedure Sort (A : in out Arr) 
     with 
       Pre => A'Last > Integer'First and A'Last < Integer'Last,
     Post => Sorted (A);
	 
end Bubble;

File bubble.adb:

package body Bubble with SPARK_Mode is
        
   procedure Sort (A : in out Arr) 
   is
      Prev : Arr (A'Range) with Ghost;
      Done : Boolean;   
   begin
      for I in reverse A'First .. A'Last - 1 loop
         Prev := A;
         Done := True;
         for J in A'First .. I loop
            if A(J) > A(J + 1) then
               declare 
                  TMP : Integer := A(J);
               begin
                  A(J) := A(J + 1);
                  A(J + 1) := TMP;
                  Done := False;
               end;
            end if;
            pragma Loop_Invariant (if Done then Sorted (A(A'First .. J + 1)));
            pragma Loop_Invariant (Bubbled (A(A'First .. J + 1)));
            pragma Loop_Invariant (A(J + 2 .. A'Last) = Prev(J + 2 .. A'Last));
            pragma Loop_Invariant (for some K in A'First .. J + 1 => 
                                     A(J + 1) = Prev(K));
         end loop;
         exit when Done;
         pragma Loop_Invariant (if Done then Sorted (A));
         pragma Loop_Invariant (Bubbled (A(A'First .. I + 1)));
         pragma Loop_Invariant (Sorted (A(I + 1 .. A'Last)));
      end loop;
   end Sort;
   
end Bubble;

File main.adb:

with Ada.Integer_Text_IO;
with Bubble;

procedure Main is
   A : Bubble.Arr := (5,4,6,3,7,2,8,1,9);
begin
   Bubble.Sort (A);
   for I in A'Range loop
      Ada.Integer_Text_IO.Put (A(I));
   end loop;
end Main;

File bubble.gpr:

project Bubble is

   for Main use ("main.adb");

end Bubble;

To verify the program, execute the command: gnatprove -P bubble.gpr -j0 --level=2

File gnatprove/gnatprove.out:

Summary of SPARK analysis
=========================

--------------------------------------------------------------------------------------------------------------------
SPARK Analysis results        Total       Flow   Interval   CodePeer                  Provers   Justified   Unproved
--------------------------------------------------------------------------------------------------------------------
Data Dependencies                 .          .          .          .                        .           .          .
Flow Dependencies                 .          .          .          .                        .           .          .
Initialization                    6          6          .          .                        .           .          .
Non-Aliasing                      .          .          .          .                        .           .          .
Run-time Checks                  36          .          .          .                36 (CVC4)           .          .
Assertions                       14          .          .          .    14 (CVC4 64%, Z3 36%)           .          .
Functional Contracts              7          .          .          .     7 (CVC4 89%, Z3 11%)           .          .
LSP Verification                  .          .          .          .                        .           .          .
--------------------------------------------------------------------------------------------------------------------
Total                            63    6 (10%)          .          .                 57 (90%)           .          .


Analyzed 2 units
in unit bubble, 4 subprograms and packages out of 4 analyzed
  Bubble at bubble.ads:1 flow analyzed (0 errors, 0 checks and 0 warnings) and proved (0 checks)
  Bubble.Bubbled at bubble.ads:11 flow analyzed (0 errors, 0 checks and 0 warnings) and proved (3 checks)
  Bubble.Sort at bubble.ads:17 flow analyzed (0 errors, 0 checks and 0 warnings) and proved (50 checks)
  Bubble.Sorted at bubble.ads:5 flow analyzed (0 errors, 0 checks and 0 warnings) and proved (4 checks)
in unit main, 0 subprograms and packages out of 1 analyzed
  Main at main.adb:4 skipped

Standard ML

Assumes a list of integers.

fun bubble_select [] = []
  | bubble_select [a] = [a]
  | bubble_select (a::b::xs) =
    if b < a then b::(bubble_select(a::xs)) else a::(bubble_select(b::xs))
 
fun bubblesort [] = []
  | bubblesort (x::xs) =bubble_select (x::(bubblesort xs))

Stata

mata
function bubble_sort(a) {
	n = length(a)
	for (j = n; j >= 2; j--) {
		q = 1
		for (i = 2; i <= j; i++) {
			if (a[i-1] > a[i]) {
				q = 0
				s = a[i-1]
				a[i-1] = a[i]
				a[i] = s
			}
		}
		if (q) return
	}
}
end

Swift

func bubbleSort<T:Comparable>(list:inout[T]) {
    var done = false
    while !done {
        done = true
        for i in 1..<list.count {
            if list[i - 1] > list[i] {
                (list[i], list[i - 1]) = (list[i - 1], list[i])
                done = false
            }
        }
    }
}

var list1 = [3, 1, 7, 5, 2, 5, 3, 8, 4]
print(list1)
bubbleSort(list: &list1)
print(list1)

Symsyn

x : 23 : 15 : 99 : 146 : 3 : 66 : 71 : 5 : 23 : 73 : 19

bubble_sort param index size
 
 + index size limit
lp
  changes
  - limit
  index i
  if i < limit
    + 1 i ip1
    if base.i > base.ip1
       swap base.i base.ip1
       + changes
    endif
    + i 
    goif
  endif
 if changes > 0 
    go lp
 endif
 return


start
 
 ' original values : ' $r
 call showvalues
 call bubble_sort @x #x
 ' sorted values : ' $r
 call showvalues
 stop
 
showvalues
 $s
 i
 if i < #x
    "$s ' ' x.i ' '" $s
    + i
    goif
 endif
 " $r $s " []
 return

Tailspin

templates bubblesort
  @: $;
  $::length..2:-1 -> 2..$ -> #
  $@ !

  when <?($@($) <..~$@($ - 1)>)> do
    def temp: $@($);
    @($): $@($ - 1);
    @($ - 1): $temp;
end bubblesort

[4,5,3,8,1,2,6,7,9,8,5] -> bubblesort -> !OUT::write

Tcl

Library: Tcllib (Package: struct::list)
package require Tcl 8.5
package require struct::list

proc bubblesort {A} {
    set len [llength $A]
    set swapped true
    while {$swapped} {
        set swapped false
        for {set i 0} {$i < $len - 1} {incr i} {
            set j [expr {$i + 1}]
            if {[lindex $A $i] > [lindex $A $j]} {
                struct::list swap A $i $j
                set swapped true
            }
        }
        incr len -1
    }
    return $A
}

puts [bubblesort {8 6 4 2 1 3 5 7 9}] ;# => 1 2 3 4 5 6 7 8 9

Idiomatic code uses the builtin lsort instead, which is a stable O(n log n) sort.

Toka

Toka does not have a bubble sort predefined, but it is easy to code a simple one:

#! A simple Bubble Sort function
value| array count changed |
[ ( address count -- )
  to count to array
  count 0
  [ count 0
    [ i array array.get i 1 + array array.get 2dup >
      [ i array array.put  i 1 + array array.put ]
      [ 2drop ] ifTrueFalse
    ] countedLoop
    count 1 - to count
  ] countedLoop
] is bsort

#! Code to display an array
[ ( array count -- ) 
  0 swap [ dup i swap array.get . ] countedLoop drop cr 
] is .array

#! Create a 10-cell array
10 cells is-array foo

#! Fill it with random values
  20  1 foo array.put
  50  2 foo array.put
 650  3 foo array.put
 120  4 foo array.put
 110  5 foo array.put
 101  6 foo array.put
1321  7 foo array.put
1310  8 foo array.put
 987  9 foo array.put
 10 10 foo array.put

#! Display the array, sort it, and display it again
foo 10 .array
foo 10 bsort
foo 10 .array

TorqueScript

//Note that we're assuming that the list of numbers is separated by tabs.
function bubbleSort(%list)
{
	%ct = getFieldCount(%list);
	for(%i = 0; %i < %ct; %i++)
	{
		for(%k = 0; %k < (%ct - %i - 1); %k++)
		{
			if(getField(%list, %k) > getField(%list, %k+1))
			{
				%tmp = getField(%list, %k);
				%list = setField(%list, %k, getField(%list, %k+1));
				%list = setField(%list, %k+1, %tmp);
			}
		}
	}
	return %list;
}

Unicon

See Icon.

UnixPipes

rm -f _sortpass 

reset() {
   test -f _tosort || mv _sortpass _tosort
}

bpass() {
  (read a; read b
  test -n "$b" -a "$a" && (
      test $a -gt $b && (reset; echo $b;  (echo $a ; cat) | bpass ) || (echo $a;  (echo $b ; cat) | bpass )
  ) || echo $a)
}

bubblesort() {
  cat > _tosort
  while test -f _tosort
  do
      cat _tosort | (rm _tosort;cat) |bpass > _sortpass
  done
  cat _sortpass
}

cat to.sort | bubblesort

Ursala

The bubblesort function is parameterized by a relational predicate.

#import nat

bubblesort "p" = @iNX ^=T ^llPrEZryPrzPlrPCXlQ/~& @l ~&aitB^?\~&a "p"?ahthPX/~&ahPfatPRC ~&ath2fahttPCPRC

#cast %nL

example = bubblesort(nleq) <362,212,449,270,677,247,567,532,140,315>
Output:
<140,212,247,270,315,362,449,532,567,677>

Vala

void swap(int[] array, int i1, int i2) {
  if (array[i1] == array[i2])
    return;
  var tmp = array[i1];
  array[i1] = array[i2];
  array[i2] = tmp;
}

void bubble_sort(int[] array) {
  bool flag = true;
  int j = array.length;
  while(flag) {
    flag = false;
    for (int i = 1; i < j; i++) {
      if (array[i] < array[i - 1]) {
        swap(array, i - 1, i);
        flag = true;
      }
    }
    j--;
  }
}

void main() {
  int[] array = {5, -1, 101, -4, 0, 1, 8, 6, 2, 3};
  bubble_sort(array);
  foreach (int i in array)
    print("%d ", i);
}
Output:
-4 -1 0 1 2 3 5 6 8 101 

V (Vlang)

fn bubble(mut arr []int) {
        println('Input: ${arr.str()}')
        mut count := arr.len
        for {
                if count <= 1 {
                        break
                }
                mut has_changed := false
                count--
                for i := 0; i < count; i++ {
                        if arr[i] > arr[i + 1] {
                                temp := arr[i + 1]
                                arr[i + 1] = arr[i]
                                arr[i] = temp
                                has_changed = true
                        }
                }
                if !has_changed {
                        break
                }
        }
        println('Output: ${arr.str()}')
}

fn main() {
        mut arr := [3, 5, 2, 1, 4]
        bubble(mut arr)
}
Output:
Input: [3, 5, 2, 1, 4]
Output: [1, 2, 3, 4, 5]

Wren

Based on the pseudo-code in the Wikipedia article.

var bubbleSort = Fn.new { |a|
    var n = a.count
    if (n < 2) return
    while (true) {
        var swapped = false
        for (i in 1..n-1) {
            if (a[i-1] > a[i]) {
                var t = a[i-1]
                a[i-1] = a[i]
                a[i] = t
                swapped = true
            }
        }
        if (!swapped) return
    }
}

var array = [ [4, 65, 2, -31, 0, 99, 2, 83, 782, 1], [7, 5, 2, 6, 1, 4, 2, 6, 3] ]
for (a in array) {
    System.print("Before: %(a)")
    bubbleSort.call(a)
    System.print("After : %(a)")
    System.print()
}
Output:
Before: [4, 65, 2, -31, 0, 99, 2, 83, 782, 1]
After : [-31, 0, 1, 2, 2, 4, 65, 83, 99, 782]

Before: [7, 5, 2, 6, 1, 4, 2, 6, 3]
After : [1, 2, 2, 3, 4, 5, 6, 6, 7]

X86 Assembly

Translation of XPL0. Assemble with tasm, tlink /t

        .model  tiny
        .code
        .486
        org     100h
start:  mov     si, offset array
        mov     ax, 40          ;length of array (not including $)
        call    bsort
        mov     dx, si          ;point to array
        mov     ah, 09h         ;display it as a string
        int     21h
        ret
array   db      "Pack my box with five dozen liquor jugs.$"

;Bubble sort: si = array addrsss, ax = number of bytes
bsort:  pusha
        xchg    cx, ax          ;get size of array N
        dec     cx              ;for J:= N-1 downto 0
bs10:   xor     bx, bx          ;for I:= 0 to J-1
bs20:   mov     ax, [bx+si]
        cmp     al, ah          ;if A(I) > A(I+1) then
        jbe     bs30
         xchg   al, ah          ; swap bytes
         mov    [bx+si], ax
bs30:   inc     bx              ;next I
        cmp     bx, cx
        jb      bs20
        loop    bs10
        popa
        ret
        end     start
Output:
       .Pabcdeefghiiijklmnoooqrstuuvwxyz

Xojo

Dim temp, count As Integer
Dim isDirty As Boolean
count = Ubound(list) // count the array size

// loop through until we don't move any numbers... this means we are sorted
Do
  isDirty = False // we haven't touched anything yet
  For i As Integer = 1 To count - 1 // loop through all the numbers
    If list(i) > list(i + 1) Then // if the right number is smaller then the left.. swap
      temp = list(i + 1)
      list(i + 1) = list(i)
      list(i) = temp
      isDirty = True // we touched the data so mark it as dirty
    End
  Next
Loop Until isDirty = False // if we made it without touching the data then we are done

XPL0

include c:\cxpl\codes;          \intrinsic 'code' declarations
string 0;                       \use zero-terminated strings

proc    BSort(A, N);            \Bubble sort array in ascending order
char    A;                      \address of array
int     N;                      \number of items in array (size)
int     I, J, T;
[for J:= N-1 downto 0 do
    for I:= 0 to J-1 do
        if A(I) > A(I+1) then
            [T:= A(I);  A(I):= A(I+1);  A(I+1):= T];    \swap items
];      \BSort

func    StrLen(Str);            \Return number of characters in an ASCIIZ string
char    Str;
int     I;
for I:= 0 to -1>>1-1 do
        if Str(I) = 0 then return I;

char    Str;
[Str:= "Pack my box with five dozen liquor jugs.";
BSort(Str, StrLen(Str));
Text(0, Str);  CrLf(0);
]
Output:
"       .Pabcdeefghiiijklmnoooqrstuuvwxyz"

Yorick

func bubblesort(&items) {
  itemCount = numberof(items);
  do {
    hasChanged = 0;
    itemCount--;
    for(index = 1; index <= itemCount; index++) {
      if(items(index) > items(index+1)) {
        items([index,index+1]) = items([index+1,index]);
        hasChanged = 1;
      }
    }
  } while(hasChanged);
}

zkl

fcn bubbleSort(list){
   itemCount := list.len();
   do{
      hasChanged := False;
      foreach index in (itemCount -= 1){
	 if (list[index] > list[index + 1]){
	    list.swap(index,index + 1);
	    hasChanged = True;
	 }
      }
   }while(hasChanged);
   list
}

Or, punting early termination:

fcn bubbleSort(list){
   foreach n,index in ([list.len()-1..0,-1],n){
      if (list[index] > list[index + 1]) list.swap(index,index + 1);
   }
   list
}
bubbleSort("This is a test".split("")).println();
Output:
L(" "," "," ","T","a","e","h","i","i","s","s","s","t","t")