Sleep

From Rosetta Code
Revision as of 13:05, 7 August 2024 by Zeddicus (talk | contribs) (→‎Using the TIMEOUT command)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Task
Sleep
You are encouraged to solve this task according to the task description, using any language you may know.
Task

Write a program that does the following in this order:

  • Input an amount of time to sleep in whatever units are most natural for your language (milliseconds, seconds, ticks, etc.). This unit should be noted in comments or in a description.
  • Print "Sleeping..."
  • Sleep the main thread for the given amount of time.
  • Print "Awake!"
  • End.


Related task



11l

Translation of: Python
V seconds = Float(input())
print(‘Sleeping...’)
sleep(seconds)
print(‘Awake!’)

360 Assembly

REENTRANT means the program can be called from several callers simultaneously. The program obtains storage (memory) at each invocation. Sleep (logically swapped out task) is established through STIMER macro (SVC 47)

         START 
         PRINT DATA,GEN 
         YREGS ,                      REGISTER EQUATES (e.g. 0 = R0) 
SLEEP    CSECT  
SLEEP    AMODE 31                     addressing mode 31 bit 
SLEEP    RMODE ANY                    loader determines 31 or 24
***********************************************************************
* REENTRANT. Logically swap out a task for a number of seconds 
*            specified in PARM. Minimum 0, maximum 60 seconds 
* 
* MVS rexx (the original rexx) does not have a sleep function. This 
* program can be called from rexx, assuming this program is in 
* LINKLIST, as follows: 
* 
*         /* rexx */ 
*         wait_time = '6' /* number of seconds to sleep */ 
*         say 'Sleeping...'
*         address LINKMVS "SLEEP wait_time"  /* invoke SLEEP */ 
*         say 'Awake!
***********************************************************************
PROLOG   BAKR  R14,0                 satck caller's registers 
         LR    R4,R1                 save parm pointer 
         LR    R12,R15               entry point addr to R12 
         USING SLEEP,R12             tell assembler about that 
         B     AROUND                avoid abend S0C1 
         DC    C'SLEEP '             CSECT NAME 
         DC    C'C=2014.05.10 '      CHANGE DATE 
         DC    C'A=&SYSDATE '        ASSEMBLY DATE 
         DC    C'T=&SYSTIME '        CHANGE TIME 
         DC    C'MarcvdM. '          PROGRAMMER NAME 
AROUND   L     R10,0(0,R4)           load parm address in R10 
         XR    R15,R15               clear R15 
         LH    R15,0(0,R10)          load parm length in R15 
         LR    R6,R15                save length in R6 
         LTR   R15,R15               parm length 0? 
         BZ    NOPARM                yes, exit before getmain 
         C     R6,F2                 parmlength > 2 ? 
         BH    NOPARM                yes, exit before getmain 
        STORAGE OBTAIN,LENGTH=WALEN,LOC=ANY  get some storage 
         LR    R9,R1                 address of storage in R9 
         USING WAREAX,R9             base for data section (DSECT) 
         MVC   EYECAT,=C'**MARC**'   make storage easy to find in dump 
         MVC   SECONDS,C00           set field to F0F0 
         C     R6,F1                 parmlength = 1? 
         BNE   COPYSECS              no, copy both bytes 
         MVC   SECONDS+1(1),2(R10)   yes, just copy one byte. 
         B     TRTEST 
COPYSECS MVC   SECONDS,2(R10) 
* test supplied parameter for valid integer values 
TRTEST   TRT   SECONDS(1),VALINT6    first parm byte no higher as 6? 
         BNZ   NOPARM_REL            higher, release storage and return
         TRT   SECONDS+1(1),VALINT9  second byte valid? 
         BNZ   NOPARM_REL            no, release storage and return 
         CLC   SECONDS(1),=C'6'      first parm byte < 6? 
         BNE   DOWAIT                yes, do wait 
         CLC   SECONDS+1(1),=C'0'    first eq. 6, second > 0? 
         BNE   NOPARM_REL            yes, release storage and return 
DOWAIT   DS    0H 
         MVC   WAWTO(DWTOL),DWTO     copy WTO list form to obtained st.
         MVC   WAWTO+18(2),SECONDS   copy in nr. of seconds 
        WTO    MF=(E,WAWTO)          issue WTO, execute form 
         MVC   HOURS,C00             zero out hours 
         MVC   MINUTS,C00             and minutes 
         MVC   REST,C00                and milliseconds 
        STIMER WAIT,DINTVL=TIMEVAL   SVC 47: logical swap out (sleep) 
         B     EXIT                  done 
NOPARM_REL DS  0H 
        STORAGE RELEASE,ADDR=(R9),LENGTH=WALEN  free obtained storage 
         LA    R15,4                 set return code 4 
         B     RETURN                return to caller 
EXIT     DS    0H 
        STORAGE RELEASE,ADDR=(R9),LENGTH=WALEN  free obtained storage 
        WTO    ' Awake!',ROUTCDE=11   fixed wake-up string 
NOPARM   EQU   * 
RETURN   PR    ,                     return to caller 
* 
* --------------------------------------------------------------------
* CONSTANTS 
* --------------------------------------------------------------------
DWTO     WTO    ' Sleeping... (XX seconds)',ROUTCDE=11,MF=L 
DWTOL     EQU   *-DWTO             length of WTO list form 
F1        DC    F'1' 
F2        DC    F'2' 
C00       DC    C'00' 
VALINT6   DC    256XL1'01' 
          ORG   *-16 
VALOK6    DC    7XL1'00'           F0-F6: OFFSETS 240-246 
VALINT9   DC    256XL1'01' 
          ORG   *-16 
VALOK9    DC    10XL1'00'          F0-F9: OFFSETS 240-249 
          DS    0D 
         LTORG ,                   FORCE DISPLACEMENT LITERALS 
* --------------------------------------------------------------------
* DSECT (data section) 
* --------------------------------------------------------------------
WAREAX   DSECT , 
WAWTO    DS    CL(DWTOL)           reentrant WTO area 
EYECAT   DS    CL8 
TIMEVAL  DS    0CL8 
HOURS    DS    CL2                 will be zeroed 
MINUTS   DS    CL2                 will be zeroed 
SECONDS  DS    CL2                 from parm 
REST     DS    CL2                 will be zeroed 
WALEN    EQU   *-WAREAX            length of DSECT 
* --------------------------------------------------------------------
         END   SLEEP

output invoked with PARM='6' (+ sign indicates "problem state" (non system key) execution

+ Sleeping... (06 seconds)  
+ Awake!                    

8051 Assembly

Input and output is dependent on hardware. The time units are machine cycles, which depends both on the oscillator frequency and the oscillator periods to machine cycle conversion factor. This code puts the processor into 'idle' mode, where code execution is stopped and resumed via an interrupt.

ORG RESET
	jmp main
ORG TIMER0
	; timer interrupt only used to wake the processor
	clr tr0
	reti

main:
	setb ea		; enable interrupts
	setb et0	; enable timer0 interrupt
	mov tl0, #0	; start timer counter at zero
	mov th0, #0	; these two values dictate the length of sleep

	mov a, pcon	; copy power control register
	setb a.0	; set idl bit
	setb tr0	; start timer
	; sleeping...
	mov pcon, a	; move a back into pcon (processor sleeps after this instruction finishes)

	; when the timer overflows and the timer interrupt returns, execution will resume at this spot

	; Awake!
	jmp $

8th

f:stdin f:getline 
"Sleeping..." . cr  
eval sleep 
"Awake!" . cr bye

AArch64 Assembly

Works with: as version Raspberry Pi 3B version Buster 64 bits
/* ARM assembly AARCH64 Raspberry PI 3B */
/*  program sleep64.s   */

/*******************************************/
/* Constantes file                         */
/*******************************************/
/* for this file see task include a file in language AArch64 assembly */
.include "../includeConstantesARM64.inc"

.equ SLEEP,  0x65                        // Linux syscall
 
 
.equ BUFFERSIZE,         100
/*******************************************/
/* Initialized data                        */
/*******************************************/
.data
szMessQuest:             .asciz "Enter the time to sleep in seconds : "
szMessError:             .asciz "Error occured.\n" 
szMessSleep:             .asciz "Sleeping Zzzzzzz.\n" 
szMessAwake:             .asciz "Awake!!!\n"
 
szCarriageReturn:        .asciz "\n"
/*******************************************/
/* UnInitialized data                      */
/*******************************************/
.bss 
.align 4
ZonesAttente:
  qSecondes:      .skip 8
  qMicroSecondes: .skip 8
ZonesTemps:       .skip 16
sBuffer:          .skip BUFFERSIZE
/*******************************************/
/*  code section                           */
/*******************************************/
.text
.global main 
main: 
    ldr x0,qAdrszMessQuest            // display invite message
    bl affichageMess
    mov x0,STDIN                      // input standard linux
    ldr x1,qAdrsBuffer
    mov x2,BUFFERSIZE
    mov x8,READ                       // read input string
    svc 0 
    cmp x0,0                          // read error ?
    ble 99f
    // 
    ldr x0,qAdrsBuffer                // buffer address
    bl conversionAtoD                 // conversion string in number in x0
 
    ldr x1,qAdrqSecondes 
    str x0,[x1]                       // store second number in area
    ldr x0,qAdrszMessSleep            // display sleeping message
    bl affichageMess
    ldr x0,qAdrZonesAttente           // delay area
    ldr x1,qAdrZonesTemps             //
    mov x8,#SLEEP                     // call system SLEEP
    svc 0 
    cmp x0,#0                         // error sleep ?
    blt 99f
    ldr x0,qAdrszMessAwake            // display awake message
    bl affichageMess
    mov x0, #0                        // return code
    b 100f
99:                                   // display error message
    ldr x0,qAdrszMessError
    bl affichageMess
    mov x0, 1                         // return code
 
100:                                  // standard end of the program
    mov x8,EXIT                       // request to exit program
    svc 0                             // perform system call
qAdrszMessQuest:          .quad szMessQuest
qAdrszMessError:          .quad szMessError
qAdrszMessSleep:          .quad szMessSleep
qAdrszMessAwake:          .quad szMessAwake
qAdrqSecondes:            .quad qSecondes
qAdrZonesAttente:         .quad ZonesAttente
qAdrZonesTemps:           .quad ZonesTemps
qAdrsBuffer:              .quad sBuffer
qAdrszCarriageReturn:     .quad szCarriageReturn
/********************************************************/
/*        File Include fonctions                        */
/********************************************************/
/* for this file see task include a file in language AArch64 assembly */
.include "../includeARM64.inc"
Enter the time to sleep in seconds : 5
Sleeping Zzzzzzz.
Awake!!!

Action!

BYTE RTCLOK1=$13
BYTE RTCLOK2=$14
BYTE PALNTSC=$D014

PROC Wait(CARD frames)
  BYTE lsb=frames,msb=frames+1

  ;wait lsb of frames
  lsb==+RTCLOK2
  WHILE lsb#RTCLOK2 DO OD
  
  ;wait msb of 256*frames
  WHILE msb>0
  DO
    WHILE lsb=RTCLOK2 DO OD
    WHILE lsb#RTCLOK2 DO OD
    msb==-1
  OD
RETURN

CARD FUNC GetFrame()
  CARD res
  BYTE lsb=res,msb=res+1

  lsb=RTCLOK2
  msb=RTCLOK1
RETURN (res)

CARD FUNC MsToFrames(CARD ms)
  CARD res

  IF PALNTSC=15 THEN
    res=ms/60
  ELSE
    res=ms/50
  FI
RETURN (res)

CARD FUNC FramesToMs(CARD frames)
  CARD res

  IF PALNTSC=15 THEN
    res=frames*60
  ELSE
    res=frames*50
  FI
RETURN (res)

PROC Main()
  CARD ARRAY data=[1 5 10 50 100 500]
  CARD beg,end,diff,diffMs,delay,delayMs
  BYTE i

  FOR i=0 TO 5
  DO
    delay=data(i)
    delayMs=FramesToMs(delay)
    PrintF("Wait %U frames / %U ms...%E",delay,delayMs)

    beg=GetFrame()
    Wait(delay)
    end=GetFrame()
    diff=end-beg
    diffMs=FramesToMs(diff)

    PrintF("Frame number at begin %U%E",beg)
    PrintF("Frame number at end %U%E",end)
    PrintF("Waited %U-%U=%U frames / %U ms%E%E",end,beg,diff,diffMs)
  OD
RETURN
Output:

The following result has been obtained from PAL version of Atari 8-bit computer.

Screenshot from Atari 8-bit computer

Wait 1 frames / 50 ms...
Frame number at begin 411
Frame number at end 412
Waited 412-411=1 frames / 50 ms

Wait 5 frames / 250 ms...
Frame number at begin 423
Frame number at end 428
Waited 428-423=5 frames / 250 ms

Wait 10 frames / 500 ms...
Frame number at begin 439
Frame number at end 449
Waited 449-439=10 frames / 500 ms

Wait 50 frames / 2500 ms...
Frame number at begin 460
Frame number at end 510
Waited 510-460=50 frames / 2500 ms

Wait 100 frames / 5000 ms...
Frame number at begin 521
Frame number at end 621
Waited 621-521=100 frames / 5000 ms

Wait 500 frames / 25000 ms...
Frame number at begin 635
Frame number at end 1135
Waited 1135-635=500 frames / 25000 ms

Ada

The Ada delay statement takes an argument of type Duration, which is a real number counting the number of seconds to delay. Thus, 2.0 will delay 2.0 seconds, while 0.001 will delay 0.001 seconds.

with Ada.Text_Io; use Ada.Text_Io;
with Ada.Float_Text_Io; use Ada.Float_Text_Io;
 
procedure Sleep is
   In_Val : Float;
begin
   Get(In_Val);
   Put_Line("Sleeping...");
   delay Duration(In_Val);
   Put_Line("Awake!");
end Sleep;

Aime

o_text("Sleeping...\n");

# Sleep X seconds
sleep(atoi(argv(1)));

# Sleep X microseconds
#usleep(atoi(argv(1)));

o_text("Awake!\n");

ALGOL 68

Works with: ALGOL 68G version Any for Microsoft Windows - tested with release 2.8.win32

Only works for Microsoft Windows because it uses Windows-specific ping syntax.

# using ping to sleep #
INT milliseconds = read int; # ping uses milliseconds #
print ("Sleeping...");
VOID (system ("ping 0.0.0.1 -n 1 -w " + whole (milliseconds, 0) + " >NUL"));
# 0.0.0.1 is an invalid IP address and cannot be used, so this will never conflict with a real IP address #
# ping -n gives number of tries, -w timeout, and >NUL deletes output so the user does not see it #
print (new line);
print ("Awake!")

AntLang

milliseconds: eval[input["How long should I sleep? "]] / eval = evil, but this is just a simple demo
echo["Sleeping..."]
sleep[milliseconds]
echo["Awake!"]

Applesoft BASIC

The cycles and times calculated should only be taken as a minimum delay.

 10  POKE 768,169: POKE 770,76
 20  POKE 771,168: POKE 772,252
 30  INPUT "ENTER WAIT VALUE (1-256) : ";A
 40  IF A < 1 OR A > 256 THEN 30
 50  POKE 769,(A < 256) * A
 60  LET C = (26 + 27 * A + 5 * A ^ 2) / 2
 70  PRINT "WAIT FOR "C" CYCLES OR "
 80  PRINT C * 14 / 14.318181" MICROSECONDS"
 90  PRINT "SLEEPING": CALL 768: PRINT "AWAKE"

Output:

ENTER WAIT VALUE (1-256) : 256
WAIT FOR 167309 CYCLES OR 
163591.032 MICROSECONDS
SLEEPING
AWAKE

ARM Assembly

Works with: as version Raspberry Pi
/* ARM assembly Raspberry PI  */
/*  program sleepAsm.s   */

/* Constantes    */
.equ STDIN,  0                           @ Linux input console
.equ STDOUT, 1                           @ Linux output console
.equ EXIT,   1                           @ Linux syscall
.equ READ,   3                           @ Linux syscall
.equ WRITE,  4                           @ Linux syscall
.equ SLEEP,  0xa2                        @ Linux syscall


.equ BUFFERSIZE,         100
/* Initialized data */
.data
szMessQuest:             .asciz "Enter the time to sleep in seconds : "
szMessError:             .asciz "Error occured.\n" 
szMessSleep:             .asciz "Sleeping Zzzzzzz.\n" 
szMessAwake:             .asciz "Awake!!!\n"

szCarriageReturn:        .asciz "\n"

/* UnInitialized data */
.bss 
.align 4
ZonesAttente:
  iSecondes:      .skip 4
  iMicroSecondes: .skip 4
ZonesTemps:       .skip 8
sBuffer:          .skip BUFFERSIZE

/*  code section */
.text
.global main 
main: 
    ldr r0,iAdrszMessQuest            @ display invite message
    bl affichageMess
    mov r0,#STDIN                     @ input standard linux
    ldr r1,iAdrsBuffer
    mov r2,#BUFFERSIZE
    mov r7,#READ                      @ read input string
    svc 0 
    cmp r0,#0                         @ read error ?
    ble 99f
    @ 
    ldr r0,iAdrsBuffer                @ buffer address
    bl conversionAtoD                 @ conversion string in number in r0

    ldr r1,iAdriSecondes 
    str r0,[r1]                       @ store second number in area
    ldr r0,iAdrszMessSleep            @ display sleeping message
    bl affichageMess
    ldr r0,iAdrZonesAttente           @ delay area
    ldr r1,iAdrZonesTemps             @
    mov r7,#SLEEP                     @ call system SLEEP
    svc 0 
    cmp r0,#0                         @ error sleep ?
    blt 99f
    ldr r0,iAdrszMessAwake            @ display awake message
    bl affichageMess
    mov r0, #0                        @ return code
    b 100f
99:                                   @ display error message
    ldr r0,iAdrszMessError
    bl affichageMess
    mov r0, #1                        @ return code

100:                                  @ standard end of the program
    mov r7, #EXIT                     @ request to exit program
    svc 0                             @ perform system call
iAdrszMessQuest:          .int szMessQuest
iAdrszMessError:          .int szMessError
iAdrszMessSleep:          .int szMessSleep
iAdrszMessAwake:          .int szMessAwake
iAdriSecondes:            .int iSecondes
iAdrZonesAttente:         .int ZonesAttente
iAdrZonesTemps:           .int ZonesTemps
iAdrsBuffer:              .int sBuffer
iAdrszCarriageReturn:     .int szCarriageReturn


/******************************************************************/
/*     display text with size calculation                         */ 
/******************************************************************/
/* r0 contains the address of the message */
affichageMess:
    push {r0,r1,r2,r7,lr}                       @ save  registers 
    mov r2,#0                                   @ counter length */
1:                                              @ loop length calculation
    ldrb r1,[r0,r2]                             @ read octet start position + index 
    cmp r1,#0                                   @ if 0 its over
    addne r2,r2,#1                              @ else add 1 in the length
    bne 1b                                      @ and loop 
                                                @ so here r2 contains the length of the message 
    mov r1,r0                                   @ address message in r1 
    mov r0,#STDOUT                              @ code to write to the standard output Linux
    mov r7, #WRITE                              @ code call system "write" 
    svc #0                                      @ call system
    pop {r0,r1,r2,r7,lr}                        @ restaur registers
    bx lr                                       @ return
 /******************************************************************/
/*     Convert a string to a number stored in a registry          */ 
/******************************************************************/
/* r0 contains the address of the area terminated by 0 or 0A */
/* r0 returns a number                           */
conversionAtoD:
    push {fp,lr}         @ save 2 registers 
    push {r1-r7}         @ save others registers 
    mov r1,#0
    mov r2,#10           @ factor 
    mov r3,#0            @ counter 
    mov r4,r0            @ save address string -> r4 
    mov r6,#0            @ positive sign by default 
    mov r0,#0            @ initialization to 0 
1:     /* early space elimination loop */
    ldrb r5,[r4,r3]      @ loading in r5 of the byte located at the beginning + the position 
    cmp r5,#0            @ end of string -> end routine
    beq 100f
    cmp r5,#0x0A         @ end of string -> end routine
    beq 100f
    cmp r5,#' '          @ space ? 
    addeq r3,r3,#1       @ yes we loop by moving one byte 
    beq 1b
    cmp r5,#'-'          @ first character is -    
    moveq r6,#1          @  1 -> r6
    beq 3f               @ then move on to the next position 
2:   /* beginning of digit processing loop */
    cmp r5,#'0'          @ character is not a number 
    blt 3f
    cmp r5,#'9'          @ character is not a number
    bgt 3f
    /* character is a number */
    sub r5,#48
    ldr r1,iMaxi         @ check the overflow of the register    
    cmp r0,r1
    bgt 99f              @ overflow error
    mul r0,r2,r0         @ multiply par factor 10 
    add r0,r5            @ add to  r0 
3:
    add r3,r3,#1         @ advance to the next position 
    ldrb r5,[r4,r3]      @ load byte 
    cmp r5,#0            @ end of string -> end routine
    beq 4f
    cmp r5,#0x0A            @ end of string -> end routine
    beq 4f
    b 2b                 @ loop 
4:
    cmp r6,#1            @ test r6 for sign 
    moveq r1,#-1
    muleq r0,r1,r0       @ if negatif, multiply par -1 
    b 100f
99:  /* overflow error */
    ldr r0,=szMessErrDep
    bl   affichageMess
    mov r0,#0            @ return  zero  if error
100:
    pop {r1-r7}          @ restaur other registers 
    pop {fp,lr}          @ restaur   2 registers 
    bx lr                @return procedure 
/* constante program */	
iMaxi: .int 1073741824	
szMessErrDep:  .asciz  "Too large: overflow 32 bits.\n"
.align 4

Arturo

time: to :integer input "Enter number of milliseconds: "
print "Sleeping..."
pause time
print "Awake!"
Output:
Enter number of milliseconds: 1000
Sleeping...
Awake!

AutoHotkey

TrayTip, sleeping, sleeping
sleep, 2000 ; 2 seconds
TrayTip, awake, awake
Msgbox, awake

AutoIt

#AutoIt Version: 3.2.10.0
$sleep_me=InputBox("Sleep", "Number of seconds to sleep", "10", "", -1, -1, 0, 0)
Dim $sleep_millisec=$sleep_me*1000
MsgBox(0,"Sleep","Sleeping for "&$sleep_me&" sec")
sleep ($sleep_millisec)
MsgBox(0,"Awake","... Awaking")

AWK

# syntax: GAWK -f SLEEP.AWK [seconds]
BEGIN {
    print("Sleeping...")
    loop(ARGV[1])
    print("Awake!")
    exit(0)
}
function loop(seconds,  t) {
# awk lacks a sleep mechanism, so simulate one by looping
    t = systime()
    while (systime() < t + seconds) {}
}

commands and output:

GAWK "BEGIN{print(strftime())}"
GAWK -f SLEEP.AWK 3
GAWK "BEGIN{print(strftime())}"

Wed Jan 16 18:06:44 Eastern Standard Time 2013
Sleeping...
Awake!
Wed Jan 16 18:06:47 Eastern Standard Time 2013

Axe

The time unit for the Pause command is based on clock cycles, not seconds. At 15 MHz, one second is approximately equal to a value of 4500. At 6 MHz, one second is approximately 1800.

Disp "TIME:"
input→A
0→T
length(A)→L
For(I,1,L)
 If {A}<'0' or {A}>'9'
  Disp "NOT A NUMBER",i
  Return
 End
 T*10+{A}-'0'→T
 A++
End
Disp "SLEEPING...",i
Pause T
Disp "AWAKE",i

BASIC

Works with: QuickBasic version 4.5
INPUT sec 'the SLEEP command takes seconds
PRINT "Sleeping..."
SLEEP sec
PRINT "Awake!"

"SLEEP" with no argument will sleep until a button is pressed on the keyboard (including modifier keys such as shift or control). Also, pressing a key while SLEEP is waiting for a specific amount of time (as above) will end the SLEEP.

BASIC256

print "Enter number of seconds to sleep: "; 
input ms
print "Sleeping..."
pause ms
print "Awake!"
end

True BASIC

PRINT "Enter number of seconds to sleep";
INPUT ms
PRINT "Sleeping..."
PAUSE ms
PRINT "Awake!"
END

Yabasic

The sleep-command has many different names: You may write pause, sleep or wait interchangeably; whatever you write, yabasic will always do exactly the same.

input "Enter number of seconds to sleep: " ms
print "Sleeping..."

sleep ms
//pause ms
//wait ms

print "Awake!"
end

Sinclair ZX81 BASIC

The PAUSE statement pauses execution for a length of time expressed in terms of the frame rate of the television you are using as a monitor. But there are one or two problems with it...

(1) Televisions in different countries have (had) different frame rates, so a one-second pause would need to be coded as PAUSE 50 in Britain and PAUSE 60 in the United States. The use of PAUSE therefore reduces compatibility.

(2) The highest acceptable value is 32767 frames: anything higher is taken to mean "pause forever".

(3) If the user presses a key, the computer will stop pausing and resume execution from the line after the PAUSE.

(4) In FAST mode the PAUSE statement needs to be followed by POKE 16437,255 to avoid corrupting the program.

(5) The duration of the pause is not terribly precise.

(6) The screen flickers irritatingly when the pause ends, even if you are in SLOW mode.

Bearing all these factors in mind, it will often be found easier to use an empty FOR loop instead.

(Oh, and the ZX81 character set doesn't include lower-case letters or an exclamation mark: so the message Awake! has to be replaced by AWAKE.)

10 PRINT "HOW LONG SHOULD I SLEEP FOR?"
20 PRINT "(IN TELEVISION FRAMES)"
30 INPUT SLEEPTIME
40 PRINT "SLEEPING... ";
50 PAUSE SLEEPTIME
60 PRINT "AWAKE."

BaCon

'---The SLEEP command takes milliseconds by default but we will adjust it 
PRINT "Enter a number for each second you want to wait\nthen press Enter "
INPUT millisec 
PRINT "Sleeping..."
SLEEP millisec * 1000
PRINT "Awake!"

ZX Spectrum Basic

Pressing a key will cut the pause short on the ZX Spectrum.

10 REM s is the number of seconds
20 LET s = 5
30 PRINT "Sleeping"
40 PAUSE s * 50
50 PRINT "Awake"

Batch File

The usual way to do this is to use the ping utility which waits a second between multiple tries. To wait n seconds one tells ping to make n + 1 tries and redirects the output:

Works with: Windows NT version 4
@echo off
set /p Seconds=Enter the number of seconds to sleep: 
set /a Seconds+=1
echo Sleeping ...
ping -n %Seconds% localhost >nul 2>&1
echo Awake!

A similar trick can be used to wait a certain number of milliseconds. The ping utility includes a /w option which specifies the timeout to wait for a reply. This coupled with an unreachable address (where the full timeout will be needed) leads to the following:

Works with: Windows 2000
@echo off
set /p MilliSeconds=Enter the number of milliseconds to sleep: 
echo Sleeping ...
ping -n 1 -w %MilliSeconds% 1.2.3.4 >nul 2>&1
echo Awake!

Starting with Windows Vista there is a command-line utility to wait a number of seconds:

Works with: Windows Vista
@echo off
set /p Seconds=Enter the number of seconds to sleep: 
echo Sleeping ...
timeout /t %Seconds% /nobreak >nul
echo Awake!

BBC BASIC

      INPUT "Enter the time to sleep in centiseconds: " sleep%
      PRINT "Sleeping..."
      WAIT sleep%
      PRINT "Awake!"

Whilst sleeping BBC BASIC for Windows periodically tests for the ESCape key being pressed.

C

Works with: POSIX

The function sleep needs seconds, which are read from the standard input.

#include <stdio.h>
#include <unistd.h>

int main()
{
  unsigned int seconds;
  scanf("%u", &seconds);
  printf("Sleeping...\n");
  sleep(seconds);
  printf("Awake!\n");
  return 0;
}

C#

using System;
using System.Threading;

class Program
{
    static void Main(string[] args)
    {
        int sleep = Convert.ToInt32(Console.ReadLine());
        Console.WriteLine("Sleeping...");
        Thread.Sleep(sleep); //milliseconds
        Console.WriteLine("Awake!");
    }
}

C++

Works with: C++11
#include <iostream>
#include <thread>
#include <chrono>
int main()
{
    unsigned long microseconds;
    std::cin >> microseconds;
    std::cout << "Sleeping..." << std::endl;
    std::this_thread::sleep_for(std::chrono::microseconds(microseconds));
    std::cout << "Awake!\n";
}
Works with: POSIX
#include <unistd.h>
#include <iostream>

using namespace std;

int main(int argc, char* argv[])
{
    useconds_t microseconds;
    cin >> microseconds;
    cout << "Sleeping..." << endl;
    usleep(microseconds);
    cout << "Awake!" << endl;
    return 0;
}

Caché ObjectScript

SLEEP
    ; the HANG command can use fractional seconds; the Awake line will be slightly off due to processing time
    read "How long to sleep in seconds?: ",sleep
    write !,"Sleeping... time is "_$ztime($piece($ztimestamp,",",2,2),1,2)
    hang +sleep    ; use + to cast numeric, if non-numeric will hang 0
    write !,"Awake!  Time is "_$ztime($piece($ztimestamp,",",2,2),1,2)
    quit
Output:

SAMPLES>do ^SLEEP How long to sleep in seconds?: 7.25 Sleeping... time is 14:48:29.27 Awake! Time is 14:48:36.55

Clojure

(defn sleep [ms] ; time in milliseconds
  (println "Sleeping...")
  (Thread/sleep ms)
  (println "Awake!"))
; call it
(sleep 1000)

COBOL

COBOL 2023 introduced the AFTER phrase of the CONTINUE statement to specify a time period in seconds for which execution will be suspended, which, depending on implementation, could be not an integer.

Works with: COBOL 2023
       IDENTIFICATION DIVISION.
       PROGRAM-ID. Sleep-In-Seconds.

       DATA DIVISION.
       WORKING-STORAGE SECTION.
       01  Seconds-To-Sleep       USAGE IS FLOAT-LONG.

       PROCEDURE DIVISION.
           ACCEPT Seconds-To-Sleep
           DISPLAY "Sleeping..."
           CONTINUE AFTER Seconds-To-Sleep SECONDS
           DISPLAY "Awake!"
           GOBACK.

       END PROGRAM Sleep-In-Seconds.

Prior to this there were two methods for putting the program to sleep using unofficial extensions.

The first expects the amount of time to be in seconds.

Works with: ACUCOBOL-GT
Works with: GnuCOBOL
       IDENTIFICATION DIVISION.
       PROGRAM-ID. Sleep-In-Seconds.

       DATA DIVISION.
       WORKING-STORAGE SECTION.
       01  Seconds-To-Sleep       USAGE IS COMP-2.
      *>   Note: COMP-2, while supported on most implementations, is
      *>   non-standard. FLOAT-SHORT is the proper USAGE for Native
      *>   IEEE 754 Binary64 Floating-point data items.

       PROCEDURE DIVISION.
           ACCEPT Seconds-To-Sleep
           DISPLAY "Sleeping..."
           CALL "C$SLEEP" USING BY CONTENT Seconds-To-Sleep
           DISPLAY "Awake!"
           GOBACK.

       END PROGRAM Sleep-In-Seconds.

While the second expects the time to be in nanoseconds. Note: Windows systems can only sleep to the nearest millisecond.

Works with: GnuCOBOL
       IDENTIFICATION DIVISION.
       PROGRAM-ID. Sleep-In-Nanoseconds.
       OPTIONS.
           DEFAULT ROUNDED MODE IS NEAREST-AWAY-FROM-ZERO.

       DATA DIVISION.
       WORKING-STORAGE SECTION.
       01  Seconds-To-Sleep       USAGE IS FLOAT-LONG.
       01  Nanoseconds-To-Sleep   USAGE IS FLOAT-LONG.
       01  Nanoseconds-Per-Second CONSTANT AS 1000000000.

       PROCEDURE DIVISION.
           ACCEPT Seconds-To-Sleep
           COMPUTE Nanoseconds-To-Sleep
               = Seconds-To-Sleep * Nanoseconds-Per-Second
           END-COMPUTE

           DISPLAY "Sleeping..."
           CALL "CBL_OC_NANOSLEEP"
               USING BY CONTENT Nanoseconds-To-Sleep
           END-CALL

           DISPLAY "Awake!"
           GOBACK.

       END PROGRAM Sleep-In-Nanoseconds.

Common Lisp

(defun test-sleep ()
  (let ((seconds (read)))
    (format t "Sleeping...~%")
    (sleep seconds)
    (format t "Awake!~%")))

(test-sleep)

D

import std.stdio, core.thread;

void main() {
    write("Enter a time to sleep (in seconds): ");

    long secs;
    readf(" %d", &secs);

    writeln("Sleeping...");
    Thread.sleep(dur!"seconds"(secs));
    writeln("Awake!");
}
Output:
Enter a time to sleep (in seconds): 5
Sleeping...
Awake!

DCL

$ amount_of_time = p1  ! hour[:[minute][:[second][.[hundredth]]]]
$ write sys$output "Sleeping..."
$ wait 'amount_of_time
$ write sys$output "Awake!"
Output:
$ @sleep 1  ! sleeps for 1 hour
Sleeping...
Awake!
$ @sleep 0:10  ! sleeps for 10 minutes
Sleeping...
Awake!
$ @sleep 0::10  ! sleeps for 10 seconds
Sleeping...
Awake!
$ @sleep 0:1:12  ! sleeps for 1 minute and 12 seconds
Sleeping...
Awake!
$ @sleep 23:59:59.99  ! sleeps for maximum amount of time
Sleeping...
Awake!

DBL

;
;       Sleep for DBL version 4 by Dario B.
;
        PROC
;------------------------------------------------------------------
        XCALL FLAGS (0007000000,1)          ;Suppress STOP message
        
        OPEN(1,O,'TT:')
        DISPLAY (1,"Sleeping...",10)
        SLEEP 10                            ;Sleep for 10 seconds
        DISPLAY (1,"Awake!",10)

Delphi

program SleepOneSecond;

{$APPTYPE CONSOLE}

uses SysUtils;

var
  lTimeToSleep: Integer;
begin
  if ParamCount = 0 then
    lTimeToSleep := 1000
  else
    lTimeToSleep := StrToInt(ParamStr(1));
  WriteLn('Sleeping...');
  Sleep(lTimeToSleep); // milliseconds
  WriteLn('Awake!');
end.

Diego

Diego is zero-threaded, meaning that the callee can handle the instruction how they wish (dependant on decision behaviour), however, the thread behaviour can be stipulated in code.

begin_instuct(sleepTime);
    ask_human()_first()_msg(Enter number of seconds to sleep: )_var(sleepSecs)_me();
    set_decision(asynchronous)_me();
        me_msg(Sleeping...);
        me_sleep[sleepSecs]_unit(secs);
        me_msg(Awake!);
    reset_decision()_me();
end_instruct(sleepTime);

exec_instruct(sleepTime)_me();

DIBOL-11

        START    ;Demonstrate the SLEEP function

        RECORD SLEEPING
,       A8, "Sleeping"

        RECORD WAKING
,       A6,"Awake"

        PROC
        XCALL FLAGS (0007000000,1)          ;Suppress STOP message

        OPEN(8,O,'TT:')
        WRITES(8,SLEEPING)
        SLEEP 30   ; Sleep for 30 seconds
        WRITES(8,WAKING)

        END

E

You can't do that.

No, really. E's approach to timing, concurrency, and IO is non-blocking; if you want to wait for something, you say what you want to do when it happens — i.e. callbacks. There are no threads of control which can be stopped — except automatically when they just have nothing to do.

So, the closest thing possible to the task description is to wait for the specified time to pass, then do whatever the next thing is.

def sleep(milliseconds :int, nextThing) {
    stdout.println("Sleeping...")
    timer.whenPast(timer.now() + milliseconds, fn {
        stdout.println("Awake!")
        nextThing()
    })
}

EasyLang

print "How many seconds should I sleep? "
sec = number input
print "Sleeping ..."
sleep sec
print "Awake!"

EGL

program Sleep type BasicProgram{}

    // Syntax: 	sysLib.wait(time BIN(9,2) in)

    function main()
    	SysLib.writeStdout("Sleeping!");
        sysLib.wait(15); // waits for 15 seconds
        SysLib.writeStdout("Awake!");	
    end

end

Eiffel

The feature sleep is defined in the library class EXECUTION_ENVIRONMENT. So the demonstration class APPLICATION inherits from EXECUTION_ENVIRONMENT in order to make sleep available.

sleep takes an argument which declares the number of nanoseconds to suspend the thread's execution.

class
    APPLICATION
inherit
    EXECUTION_ENVIRONMENT
create
    make
feature -- Initialization
    make
            -- Sleep for a given number of nanoseconds.
        do
            print ("Enter a number of nanoseconds: ")
            io.read_integer_64
            print ("Sleeping...%N")
            sleep (io.last_integer_64)
            print ("Awake!%N")
        end
end

Output (sleeping 10 seconds):

Enter a number of nanoseconds: 10000000000
Sleeping...
Awake!

Elena

ELENA 4.x :

import extensions;
 
public program()
{
    int sleep := console.readLine().toInt();
    console.printLine("Sleeping...");
    system'threading'threadControl.sleep(sleep);
    console.printLine("Awake!")
}

Elixir

sleep = fn seconds ->
          IO.puts "Sleeping..."
          :timer.sleep(1000 * seconds)    #  in milliseconds
          IO.puts "Awake!"
        end

sec = if System.argv==[], do: 1, else: hd(System.argv) |> String.to_integer
sleep.(sec)

Emacs Lisp

(let ((seconds (read-number "Time in seconds: ")))
  (message "Sleeping ...")
  (sleep-for seconds)
  (message "Awake!"))

The time can be a decimal like 1.5 though the actual resolution of sleep-for depends on the operating system. The similar sit-for stops sleeping if there's pending keyboard input.

EMal

^|The pause command takes milliseconds, we adjust to seconds|^
fun main = int by List args
  int seconds
  if args.length == 1 do seconds = int!args[0] end
  if seconds == 0
    seconds = ask(int, "Enter number of seconds to sleep: ")
  end
  writeLine("Sleeping...")
  pause(1000 * seconds)
  writeLine("Awake!")
  return 0
end
exit main(Runtime.args)
Output:

Sample session:

Enter number of seconds to sleep: 7
Sleeping...
Awake!

Erlang

Erlang doesn't really have such a thing as a main thread. However, sleeping any process can be done with the timer:sleep/1 function:

main() ->
    io:format("Sleeping...~n"),
    timer:sleep(1000), %% in milliseconds
    io:format("Awake!~n").

It is to be noted that Erlang's sleep function is implemented in Erlang with a timeout on a receive, so you may sometimes encounter the following way of sleeping a process:

main() ->
    io:format("Sleeping...~n"),
    receive
    after 1000 -> ok %% in milliseconds
    end,
    io:format("Awake!~n").

which is the way it is implemented in the timer module.

ERRE

      ..............
      INPUT("Enter the time to sleep in seconds: ";sleep)
      PRINT("Sleeping...")
      PAUSE(sleep)
      PRINT("Awake!")
      ..............

F#

Translation of: C#
open System
open System.Threading
 
[<EntryPoint>]
let main args =
    let sleep = Convert.ToInt32(Console.ReadLine())
    Console.WriteLine("Sleeping...")
    Thread.Sleep(sleep); //milliseconds
    Console.WriteLine("Awake!")
    0

Factor

USING: calendar io math.parser threads ;

: read-sleep ( -- )
    readln string>number seconds
    "Sleeping..." print
    sleep
    "Awake!" print ;

Fantom

Fantom has a 'Duration' class, which uses time definitions with units: e.g., 5sec, 100ns, 5hr. These are used for input in the following program.

using concurrent

class Main
{
  public static Void main ()
  {
    echo ("Enter a time to sleep: ")
    input := Env.cur.in.readLine
    try
    {
      time := Duration.fromStr (input)
      echo ("sleeping ...")
      Actor.sleep (time)
      echo ("awake!")
    }
    catch
    {
      echo ("Invalid time entered")
    }
  }
}

Output:

Enter a time to sleep: 
5sec
sleeping ...
awake!

FBSL

#APPTYPE CONSOLE
DIM %msec
PRINT "Milliseconds to sleep: ";
%msec = FILEGETS(stdin, 10)
PRINT "Sleeping..."
SLEEP(%msec)
PRINT "Awake!"
PAUSE

Output

Milliseconds to sleep: 1000
Sleeping...
Awake!

Press any key to continue...

Forth

: sleep ( ms -- )
  ." Sleeping..."
  ms
  ." awake." cr ;

Explanation note on MS

MS ( n -- ) A.10.6.2.1905

MS is a Standard Forth word that waits for at least n milliseconds. It is part of the optional Facility Wordset. It is more than just a simple delay in that in a multi-tasking environment when MS is executed the current task is asleep until the time expires.

Fortran

program test_sleep

  implicit none
  integer :: iostat
  integer :: seconds
  character (32) :: argument

  if (iargc () == 1) then
    call getarg (1, argument)
    read (argument, *, iostat = iostat) seconds
    if (iostat == 0) then
      write (*, '(a)') 'Sleeping...'
      call sleep (seconds)
      write (*, '(a)') 'Awake!'
    end if
  end if

end program test_sleep

FreeBASIC

' FB 1.05.0 Win64

Dim ms As UInteger
Input "Enter number of milliseconds to sleep" ; ms
Print "Sleeping..."
Sleep ms, 1  '' the "1" means Sleep can't be interrupted with a keystroke
Print "Awake!"
End

Sample input/output

Output:
Enter number of milliseconds to sleep? 3000
Sleeping...
Awake!

Frink

In Frink, all values have units of measure, and sleep functions take units of time, which can be seconds, nanoseconds, minutes, hours, etc. The user may enter values like "3 hours" or "1 ms". The units of measure are captured as first-class values in the language, and not hidden in comments nor implied in APIs.

do
  t = eval[input["Enter amount of time to sleep: ", "1 second"]]
while ! (t conforms time)

println["Sleeping..."]
sleep[t]
println["Awake!"]

Go

Technically, this varies from the task by sleeping the main goroutine rather than the main thread. The Go runtime multiplexes goroutines to operating system threads and the language does not provide direct access to threads.

package main

import "time"
import "fmt"

func main() {
    fmt.Print("Enter number of seconds to sleep: ")
    var sec float64
    fmt.Scanf("%f", &sec)
    fmt.Print("Sleeping…")
    time.Sleep(time.Duration(sec * float64(time.Second)))
    fmt.Println("\nAwake!")
}

Groovy

Solution:

def sleepTest = {
    println("Sleeping...")
    sleep(it)
    println("Awake!")
}

Test:

sleepTest(1000)
print '''
Hmmm. That was... less than satisfying.
How about this instead?
'''
Thread.start {
    (0..5).each {
        println it
        sleep(1000)
    }
}
sleepTest(5000)

Output:

Sleeping...
Awake!

Hmmm. That was... less than satisfying
How about this instead?
Sleeping...
0
1
2
3
4
Awake!
5

Haskell

import Control.Concurrent

main = do seconds <- readLn
          putStrLn "Sleeping..."
          threadDelay $ round $ seconds * 1000000
          putStrLn "Awake!"

HicEst

DLG(NameEdit = milliseconds, Button = "Go to sleep")
WRITE(StatusBar) "Sleeping ... "
SYSTEM(WAIT = milliseconds)
WRITE(Messagebox) "Awake!"

Icon and Unicon

procedure main()

repeat {
   writes("Enter number of seconds to sleep :")
   s := reads()
   if s = ( 0 < integer(s)) then break
   }

write("\nSleeping for ",s," seconds.")
delay(1000 * s)
write("Awake!")
end

IDL

read,i,prompt='Input sleep time in seconds: '
print,'Sleeping...'
wait,i ; in seconds, but accepts floats(/fractional) as input
print,'Awake!'

J

Solution:

sleep =: 6!:3

sleeping=: monad define
  smoutput 'Sleeping...'
  sleep y
  smoutput 'Awake!'
)

Example:

   sleeping 0.500          NB.  Sleep 500 milliseconds
Sleeping...
Awake!

Java

Works with: Java version 1.5+
import java.util.InputMismatchException;
import java.util.Scanner;

public class Sleep {
    public static void main(final String[] args) throws InterruptedException {
        try {
            int ms = new Scanner(System.in).nextInt(); //Java's sleep method accepts milliseconds
            System.out.println("Sleeping...");
            Thread.sleep(ms);
            System.out.println("Awake!");
        } catch (InputMismatchException inputMismatchException) {
            System.err.println("Exception: " + inputMismatchException);
        }
    }
}

Using Java 8

import java.util.InputMismatchException;
import java.util.Scanner;
import java.util.concurrent.TimeUnit;

public final class Sleep {
	
    public static void main(String[] args) {
        try {
        	System.out.println("Enter time to sleep in milliseconds:");
        	Scanner scanner = new Scanner(System.in);        	
            final int delay = scanner.nextInt();
            scanner.close();
            
            System.out.println("Sleeping...");
            TimeUnit.MILLISECONDS.sleep(delay);
            System.out.println("Awake!");
        } catch (InputMismatchException | InterruptedException exception) {
           exception.printStackTrace(System.err);;
        }
    }
    
}
Output:
Enter time to sleep in milliseconds:
4321
Sleeping...
Awake!

JavaScript

(in a web browser)

Generally, JavaScript in a web browser is event-loop based and (except for alert()) non-blocking. So, the closest thing possible to the task description is to do something once the specified time has passed.

<script>

  setTimeout(function () {
    document.write('Awake!')
  }, prompt("Number of milliseconds to sleep"));

  document.write('Sleeping... ');

</script>

jq

`sleep($n)` will pause (busily) for at least the given time period, measured in seconds. The excess time slept, namely `$n | sleep(.) - .`, will likely be less than some particular value on each platform, e.g. 0.00001 seconds on a 3GHz machine.

# Pseudosleep for at least the given number of $seconds (a number)
# and emit the actual number of seconds that have elapsed.
def sleep($seconds):
  now
  | . as $now
  | until( .  - $now >= $seconds; now)
  | . - $now ;

Jsish

/*
   Sleep, in Jsish
*/

printf('Sleep time (in milliseconds)? ');
var ms = parseInt(console.input());

puts('Sleeping...');
sleep(ms);
puts('Awake!');

Julia

print("Please enter sleep duration in seconds: ")
input = int(readline(STDIN))
println("Sleeping...")
sleep(input)
println("Awake!")

Kotlin

// version 1.0.6

fun main(args: Array<String>) {
    print("Enter number of milliseconds to sleep: ")
    val ms = readLine()!!.toLong()
    println("Sleeping...")
    Thread.sleep(ms)
    println("Awake!")
}

Sample input/output:

Output:
Enter number of milliseconds to sleep: 3000
Sleeping...
Awake!

LabVIEW

Uses milliseconds. LabVIEW has no "main thread" so it must be forced with a sequence structure.
This image is a VI Snippet, an executable image of LabVIEW code. The LabVIEW version is shown on the top-right hand corner. You can download it, then drag-and-drop it onto the LabVIEW block diagram from a file browser, and it will appear as runnable, editable code.

Lang

$ms = fn.long(fn.input())
fn.println(Sleeping...)
fn.sleep($ms)
fn.println(Awake!)

Lasso

Lasso has a built in sleep command that accepts milliseconds as an input.

stdoutnl('Sleeping...')
sleep(5000) // Sleep 5 seconds
stdoutnl('Awake!')

Lhogho

The Logo version works without modification. Another way to Sleep, in the Windows version of Lhogho, is to use the Win32 function, viz

make "Void "V0
make "Long "U4
make "kernel32_handle libload "kernel32.dll
to Sleep :dwMilliseconds
end
external "Sleep [ Void Sleep Long] :kernel32_handle

to millisleep :n
	print [Sleeping...]
	Sleep :n                  ; units: 1/1000th of a second
	print [Awake.]
end

Liberty BASIC

Input "Please input the number of milliseconds you would like to sleep. "; sleeptime
Print "Sleeping..."
CallDLL #kernel32, "Sleep", sleeptime As long, ret As void
Print "Awake!"

Lingo

on doSleep (ms)
  put "Sleeping..."
  sleep(ms)
  put "Awake!"
end

to sleep :n
print [Sleeping...]
wait :n                  ; units: 1/60th of a second
print [Awake.]
end

Logtalk

Works when using SWI-Prolog, XSB, or YAP as the backend compilers:

:- object(sleep).

    :- public(how_long/1).

    how_long(Seconds) :-
        write('Sleeping ...'), nl,
        thread_sleep(Seconds),
        write('... awake!'), nl.

:- end_object.

Sample output:

| ?- sleep::how_long(5).
Sleeping ...
... awake!
yes

Lua

Library: LuaSocket

The input does not need to be a whole number, eg. "0.5" would cause the program to wait for half a second.

local socket = require("socket")
io.write("Input a number of seconds to sleep: ")
local input = io.read("*number")
print("Sleeping")
socket.sleep(input)
print("Awake!")

A similar effect could be achieved using a "busy" loop but the function in lua-socket is gentler on your CPU.

M2000 Interpreter

Statement Wait pause the current thread but other threads from module (not in this example) may run.

Module CheckIt {
      Input "Input a number of milliseconds to sleep:", N
      Print "Sleeping..."
      Wait N
      Print "Awake" 
}
CheckIt

Maple

sleep := proc(secs)
           print("Sleeping...");
           Threads:-Sleep(secs);
           print("Awake!");
         end proc:

Mathematica /Wolfram Language

This function, as you can probably guess, takes its argument in seconds. While this function does tie up execution (but not with a busy wait), the Mathematica front end remains fully functional and can be used to stop the sleeping with Evaluation -> Abort Evaluation.

Sleep[seconds_] := (Print["Sleeping..."]; Pause[seconds]; Print["Awake!"];)

MATLAB / Octave

function sleep()

    time = input('How many seconds would you like me to sleep for? ');
    assert(time > .01);
    disp('Sleeping...');
    pause(time);
    disp('Awake!');
    
end

min

Works with: min version 0.19.6
"Enter number of milliseconds to sleep" ask int
"Sleeping..." puts!
sleep
"Awake!" puts!

Nanoquery

time = int(input("time to sleep (ms): "))

println "Sleeping..."
sleep(time)
println "Awake!"

Nemerle

using System;
using System.Console;
using System.Threading.Thread; // this is where the Sleep() method comes from

module Zzzz
{
    Main() : void
    {
        def nap_time = Int32.Parse(ReadLine());
        WriteLine("Sleeping...");
        Sleep(nap_time); // parameter is time in milliseconds
        WriteLine("Awake!");
    }
}

NetRexx

/* NetRexx */
options replace format comments java crossref symbols nobinary

runSample(arg)
return

-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
method sleep(secs) public static binary
  ms = (secs * 1000).format(null, 0) -- milliseconds, rounded to nearest integer
  say 'Sleeping...'
  do
    Thread.sleep(ms)
  catch ix = InterruptedException
    say 'Sleep interrupted!'
    ix.printStackTrace()
  end
  say 'Awake!'
  return

-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
method runSample(arg) public static
  secs = -1
  loop until \secs.datatype('N')
    if secs > 0 then do
      say 'Napping for' secs's'
      say
      sleep(secs)
    end
    say
    say 'How many seconds do you want me to sleep? (enter something non-numeric to terminate)\-'
    parse ask secs .
    say
    end
  say
  say 'Goodbye...'
  say
  return

NewLISP

(println "Sleeping..." )
(sleep 2000) ; Wait for 2 seconds
(println "Awake!")

Nim

import os, strutils

echo "Enter how long I should sleep (in milliseconds):"
var timed = stdin.readLine.parseInt()
echo "Sleeping..."
sleep timed
echo "Awake!"

NS-HUBASIC

The PAUSE statement pauses execution for a length of time expressed in terms of the frame rate of the television you are using as a monitor.

10 PRINT "I'LL TELL YOU WHEN I BECOME AWAKE AGAIN..."
20 PAUSE 100
30 PRINT "NOW I'M AWAKE AGAIN."

Objeck

bundle Default {
  class Test {
    function : Main(args : System.String[]) ~ Nil {
      if(args->Size() = 1) {
        "Sleeping..."->PrintLine();
        Thread->Sleep(args[0]->ToInt());
        "Awake!"->PrintLine();
      };
    }
  }
}

Objective-C

Of course the same code of Sleep#C works for Objective-C. The following code uses a OpenStep derived framework (Cocoa, GNUstep...).

Works with: GNUstep

and

Works with: Cocoa
#import <Foundation/Foundation.h>

int main()
{
  @autoreleasepool {

    NSTimeInterval sleeptime;
    printf("wait time in seconds: ");
    scanf("%f", &sleeptime);

    NSLog(@"sleeping...");
    [NSThread sleepForTimeInterval: sleeptime];
    NSLog(@"awakening...");

  }
  return 0;
}

OCaml

#load "unix.cma";;
let seconds = read_int ();;
print_endline "Sleeping...";;
Unix.sleep seconds;; (* number is integer in seconds *)
print_endline "Awake!";;

or

#load "unix.cma";;
#directory "+threads";;
#load "threads.cma";;
let seconds = read_float ();;
print_endline "Sleeping...";;
Thread.delay seconds;; (* number is in seconds ... but accepts fractions *)
print_endline "Awake!";;

Oforth

 : sleepMilli(n)  "Sleeping..." . n sleep "Awake!" println ;

ooRexx

Say time()
Call sysSleep 10 -- wait 10 seconds
Say time()
Output:
14:23:40
14:23:50

Oz

declare
  class TextFile from Open.file Open.text end
  StdIn = {New TextFile init(name:stdin)}
  WaitTime = {String.toInt {StdIn getS($)}}
in
  {System.showInfo "Sleeping..."}
  {Delay WaitTime} %% in milliseconds
  {System.showInfo "Awake!"}

PARI/GP

GP does not have threading built in and so cannot truly sleep; this is code for spin-idling.

gettime

The units are milliseconds.

sleep(ms)={
  print("Sleeping...");
  while((ms-=gettime()) > 0,);
  print("Awake!")
};

sleep(input())

alarm

Works with: PARI/GP version 2.4.3 and above on Linux

The units are seconds.

sleep(s)={
  print("Sleeping...");
  alarm(s);
  trap(alarmer,,while(1,));
  print("Awake!")
};

sleep(input())

Pascal

See Delphi

PascalABC.NET

begin
  var ms := ReadInteger;
  Print('Sleeping...');
  Sleep(ms);
  Print('Awake!');
end.

Peloton

Literate mode

<@ SAYLIT>Number of seconds: </@><@ GETVAR>secs</@>
<@ SAYLIT>Sleeping</@>
<@ ACTPAUVAR>secs</@>
<@ SAYLIT>Awake</@>

French variable-length opcodes

<# MontrezLittéralement>Number of seconds: </#><# PrenezUneValeurVariable>secs</#>
<# MontrezLittéralement>Sleeping</#>
<# AgissezFaireUnePauseVariable>secs</#>
<# MontrezLittéralement>Awake</#>

(Simplified) Chinese fixed-length opcodes

<@ 显示_字串_>Number of seconds: </@><@ 获取_变量_>secs</@>
<@ 显示_字串_>Sleeping</@>
<@ 运行_暂停动变量_>secs</@>
<@ 显示_字串_>Awake</@>

Perl

seconds:

$seconds = <>;
print "Sleeping...\n";
sleep $seconds; # number is in seconds
print "Awake!\n";

microseconds and nanoseconds using the Time::HiRes module:

use Time::HiRes qw( usleep nanosleep );

$microseconds = <>;
print "Sleeping...\n";
usleep $microseconds;
print "Awake!\n";

$nanoseconds = <>;
print "Sleeping...\n";
nanosleep $nanoseconds;
print "Awake!\n";

It's also possible to sleep for fractional seconds by abusing the select function:

say "Sleeping...";
select undef, undef, undef, 0.5;
say "Awake!";

Phix

Library: Phix/basics
without js -- (prompt_number, sleep)
atom a = prompt_number("wait for duration (in seconds, 0..20):", {0,20})
puts(1,"Sleeping...\n")
sleep(a)
puts(1,"Awake!\n")

Note that sleep() is entirely inappropriate for GUI applications, which should instead set a routine to resume processing (that would be timer_cb below), activate a timer (set RUN to true), and relinquish control to the event loop. Another excellent way to perform extended processing without making an application unresponsive is via an IDLE_ACTION, provided that also regularly relinquishes control to the event loop, and can pick up where it left off when next invoked.

-- demo\rosetta\sleep.exw
with javascript_semantics
include pGUI.e
Ihandle dlg, state, label, slider, snooze, timer 
function timer_cb(Ihandle /*timer*/)
    IupSetAttribute(state,"TITLE","awake")
    IupSetInt(timer,"RUN",false)
    return IUP_CONTINUE
end function
 
function slider_cb(Ihandle /*slider*/)
    atom v = IupGetDouble(slider,"VALUE")
    IupSetInt(timer,"TIME",v*1000)
    IupSetStrAttribute(label,"TITLE","%3.1fs",{v})
    return IUP_CONTINUE
end function
function snooze_cb(Ihandle /*snooze*/)
    IupSetAttribute(state,"TITLE","asleep")
    IupSetInt(timer,"RUN",true)
    return IUP_CONTINUE
end function
IupOpen()
state = IupLabel("awake")
label = IupLabel("2.0s")
slider = IupValuator(NULL,"VALUECHANGED_CB",Icallback("slider_cb"),"MIN=1, MAX=15, VALUE=2, EXPAND=HORIZONTAL")
snooze = IupButton("Snooze",Icallback("snooze_cb"),"EXPAND=HORIZONTAL")
dlg = IupDialog(IupVbox({IupHbox({IupLabel("state: "),state},"ALIGNMENT=ACENTER"),
                         IupHbox({IupLabel("Duration: "),label,slider},"ALIGNMENT=ACENTER"),
                         IupHbox({snooze})},
                        "MARGIN=10x10"),
                `TITLE="Snooze"`)
IupSetAttributeHandle(dlg,"STARTFOCUS",snooze)
timer = IupTimer(Icallback("timer_cb"),2000,false)
IupShow(dlg)
if platform()!=JS then
    IupMainLoop()
    IupClose()
end if

PHP

seconds:

$seconds = 42;
echo "Sleeping...\n";
sleep($seconds); # number is integer in seconds
echo "Awake!\n";

microseconds:

$microseconds = 42000000;
echo "Sleeping...\n";
usleep($microseconds); # number is integer in microseconds
echo "Awake!\n";

nanoseconds:

$nanoseconds = 42000000000;
echo "Sleeping...\n";
time_nanosleep($seconds, $nanoseconds); # first arg in seconds plus second arg in nanoseconds
echo "Awake!\n";

PicoLisp

(prinl "Sleeping..." )
(wait 2000)                # Wait for 2 seconds
(prinl "Awake!")

As wait will continue executing background events, another possibility (for a complete stop) is calling some external program like

(prinl "Sleeping..." )
(call 'sleep 2)            # Wait for 2 seconds
(prinl "Awake!")

Pike

int main() {
	int seconds = (int)Stdio.stdin->gets();
	write("Sleeping...\n");
	sleep(seconds);
	write("Awake!\n");
	return 0;
}

Pixilang

fputs("Sleeping...\n")
sleep(1000)
fputs("Awake!\n")

PL/I

put ('sleeping');
delay (2000); /* wait for 2 seconds (=2000 milliseconds). */
put ('awake');

Plain English

To run:
Start up.
Demonstrate waiting.
Wait for the escape key.
Shut down.

To demonstrate waiting:
Write "How many milliseconds should I wait? " to the console without advancing.
Read some milliseconds from the console.
Write "Sleeping..." to the console.
Wait for the milliseconds.
Write "Awake!" to the console.

PowerShell

$d = [int] (Read-Host Duration in seconds)
Write-Host Sleeping ...
Start-Sleep $d
Write-Host Awake!

The -Milliseconds parameter to Start-Sleep can be used to allow for sub-second precision in sleeping.

Prolog

Works with SWI-Prolog.

rosetta_sleep(Time) :-
	writeln('Sleeping...'),
	sleep(Time),
	writeln('Awake!').

PureBasic

Sleeping is performed with Delay() and a value in milliseconds. The time is accurate to approximately +/- 15 milliseconds.

If OpenConsole()  

  Print("Enter a time(milliseconds) to sleep: ")
  x.i = Val(Input())
  PrintN("Sleeping...")
  Delay(x) ;in milliseconds
  PrintN("Awake!")
  Print(#CRLF$ + #CRLF$ + "Press ENTER to exit")
  Input()
  CloseConsole()
EndIf

Python

import time

seconds = float(raw_input())
print "Sleeping..."
time.sleep(seconds) # number is in seconds ... but accepts fractions
print "Awake!"

R

The call to flush.console is only needed if buffering is turned on. See FAQ for R on windows. The time is given in seconds (fractions allowed, resolution is system dependent).

sleep <- function(time=1)
{
   message("Sleeping...")
   flush.console()      
   Sys.sleep(time)
   message("Awake!")
}

sleep()

Racket

#lang racket
(displayln "Enter a time (in seconds): ")
(define time (read))
(when (number? time)
  (displayln "Sleeping...")
  (sleep time)
  (displayln "Awake!"))

Raku

(formerly Perl 6)

The sleep function argument is in units of seconds, but these may be fractional (to the limits of your system's clock).

my $sec = prompt("Sleep for how many microfortnights? ") * 1.2096;
say "Sleeping...";
sleep $sec;
say "Awake!";

Note that 1.2096 is a rational number in Raku, not floating point, so precision can be maintained even when dealing with very small powers of ten.

RapidQ

input "Enter the number of seconds to sleep: ";s
sleep s
print "I'm awake I think..."
input "Press enter to quit";a$

REBOL

REBOL [
    Title: "Sleep Main Thread"
    URL: http://rosettacode.org/wiki/Sleep_the_Main_Thread
]

naptime: to-integer ask "Please enter sleep time in seconds: "
print "Sleeping..."
wait naptime
print "Awake!"

Red

str-time: to integer! ask "Enter wait time "    ;get user input , convert to integer
print "waiting"
wait str-time       ;Seconds
print "awake"

Retro

Retro has no fine grained timer; so we have to make due with seconds.

: sleep ( n- )
  [ time [ time over - 1 > ] until drop ] times ;
  : test
    "\nTime to sleep (in seconds): " puts getToken toNumber
    "\nSleeping..." sleep
    "\nAwake!\n" ;

REXX

using the DELAY BIF

This REXX version supplied   as is   works with   (without the accompanying external program shown below):

  • PC/REXX
  • Personal REXX

Note:   the above two REXX interpreters support fractional seconds.

/*REXX program sleeps  X  seconds  (the number of seconds is supplied via the argument).*/
parse arg secs .                                 /*obtain optional argument from the CL.*/
if secs=='' | secs==","  then secs=0             /*Not specified?  Then assume 0 (zero).*/
say 'Sleeping'    secs    "seconds."             /*inform the invoker what's happening. */
call delay secs                                  /*Snooze.  Hopefully, just a short nap.*/
say 'Awake!'                                     /*and now inform invoker we're running.*/
                                                 /*stick a fork in it,  we're all done. */

output   when using the following for input:   4.7

Sleeping 4.7 seconds.
Awake!

using the DELAY routine

The above REXX program (using DELAY) will work with most REXXes:

  •   CMS REXX
  •   PC/REXX   (see note)
  •   Personal REXX   (see note)
  •   REGINA REXX
  •   ROO REXX
  •   R4 REXX
  •   TSO REXX
  •   (Microsoft) DOS
  •   (Microsoft) Windows
  •   any system that supports the   PING   command

when used in conjunction with the following program (either external or imbedded).


Note:   when PC/REXX or Personal REXX are used, those REXXes already have a built-in function (BIF), so the   delay   subroutine (below) will never be executed, but for other REXXes, the   DELAY   BIF will be used instead.

This REXX program only uses whole seconds   (fractional seconds are ignored).

/*REXX program delays (or SLEEPS) a number of whole seconds; fractional secs are ignored*/
trace off                                              /*suppress REXX error messages.  */
parse arg !                                            /*obtain all the arguments.      */
if !all(arg()) then exit                               /*documentation requested ?      */
if !cms  then address ''                               /*if CMS, then use fast cmd path.*/
signal on halt                                         /*handle  HALT  gracefully.      */
signal on noValue                                      /*handle the REXX noValue error. */
signal on syntax                                       /*handle the REXX syntax errors. */

          /*┌────────────────────────────────────────────────────────────────────┐
          ┌─┘ The  DELAY  function is used to delay (wait) a specific amount of  └─┐
          │ (wall-clock)  time specified in seconds.  Any fraction part is ignored.│
          │                                                                        │
          │ If the REXX program invoking  DELAY  function is running under PC/REXX │
          │ or  Personal REXX,  this REXX program should never be invoked as those │
          └─┐ REXXes have their own built-in function (BIF)  named   "DELAY".    ┌─┘
            └────────────────────────────────────────────────────────────────────┘*/

@cpsleep  = 'CP SLEEP'                                 /*point to the (CP) SLEEP command*/
@ping     = 'PING'                                     /*  "    "  "  DOS  PING     "   */

parse var ! n _                                        /*parse argument from the parms. */
if _\=='' | arg()>1  then call er 59                   /*are there too many arguments ? */
if n==''             then n=1                          /*No args?  Then assume  1 second*/
if \isNum(n)  then call er 53,n 'delay-seconds'        /*is   n   not numeric?   Error. */
n=n%1                                                  /*elide any fractional second.   */
if n<=0  then return 0
                        /* ┌────────────────────┐ */
                        /* │ delay  n  seconds. │ */
                        /* └────────────────────┘ */
  select
  when !cms     then @cpsleep  n%1  "SEC"              /*is this CMS?  Then use CP SLEEP*/
  when !tso     then call sleep n%1                    /* "   "  TSO?    "   "  SLEEP   */
  when !regina  then call sleep n%1                    /* "   " Regina?  "   "    "     */
  when !dos     then @ping '-n' n "127.0.0.1 > NUL"    /* "   "  DOS?    "   "   PING   */
  otherwise          nop
  end   /*select*/

return 0                                               /*return a zero value to invoker.*/
/*─────────────────────────────general 1─line subroutines───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────*/
!all:  !!=!;!=space(!);upper !;call !fid;!nt=right(!var('OS'),2)=="NT";!cls=word('CLS VMFCLEAR CLRSCREEN',1+!cms+!tso*2);if arg(1)\==1 then return 0;if wordpos(!,"? ?SAMPLES ?AUTHOR ?FLOW")==0 then return 0;!call=']$H';call "$H" !fn !;!call=;return 1
!cal:    if symbol('!CALL')\=="VAR"  then !call=;        return !call
!env:    !env='ENVIRONMENT'; if !sys=="MSDOS" | !brexx | !r4 | !roo  then !env='SYSTEM';  if !os2  then !env="OS2"!env;  !ebcdic=3=='f3'x;  if !crx  then !env="DOS";      return
!fid:    parse upper source !sys !fun !fid . 1 . . !fn !ft !fm .;  call !sys;  if !dos  then do;  _=lastpos('\',!fn);  !fm=left(!fn,_);  !fn=substr(!fn,_+1); parse var !fn !fn "." !ft; end;   return word(0 !fn !ft !fm, 1+('0'arg(1)))
!rex:    parse upper version !ver !vernum !verdate .;  !brexx='BY'==!vernum;  !kexx="KEXX"==!ver;  !pcrexx='REXX/PERSONAL'==!ver | "REXX/PC"==!ver;  !r4='REXX-R4'==!ver;  !regina="REXX-REGINA"==left(!ver,11);  !roo='REXX-ROO'==!ver; call !env; return
!sys:    !cms=!sys=='CMS';  !os2=!sys=="OS2";  !tso=!sys=='TSO' | !sys=="MVS";  !vse=!sys=='VSE';  !dos=pos("DOS",!sys)\==0 | pos('WIN',!sys)\==0 | !sys=="CMD";  !crx=left(!sys,6)=='DOSCRX';  call !rex;   return
!var:    call !fid;  if !kexx  then return space(dosenv(arg(1)));   return space(value(arg(1), , !env))
er:      parse arg _1,_2;  call '$ERR'  "14"p(_1)  p(word(_1,2)  !fid(1))  _2;   if _1<0  then return _1;     exit result
p:       return word(arg(1), 1)
halt:    call er .1
isNum:   return datatype(arg(1), 'N')
noValue: !sigl=sigl;  call er 17, !fid(2)  !fid(3)  !sigl  condition('D')  sourceline(!sigl)
syntax:  !sigl=sigl;  call er 13, !fid(2)  !fid(3)  !sigl  !cal()  condition('D')  sourceline(!sigl)

Coding note:   the   !   subroutines (above) deal mostly with determining what version of REXX is being invoked and what operating system is being used;   and based on that information, appropriate flags (variables) are set.   This is an example of a robust boilerplate code checking for various versions of REXX and operating systems, and it also defines additional flags not used within this particular program.

Programming note:   The subroutine   $ERR   isn't included here; so here is the gist of the error messages:

  •   er 59       too many arguments specified for the ─── DELAY ─── command.
  •   er 53       argument ─── xxx ─── isn't numeric for the option ─── delay-seconds ─── for the ─── DELAY ─── command.

Using the TIMEOUT command

Translation of: Batch File

This will work under Windows Vista and higher.

Main:
call Sleep 1
call Sleep 2
call Sleep 3
exit

Sleep:
procedure
arg s
say time('l') 'Waiting for' s 'seconds...'
'timeout /t' s '/nobreak > nul'
say time('l') 'Done!'
return
Output:
15:03:26.324000 Waiting for 1 seconds...
15:03:27.138000 Done!
15:03:27.138000 Waiting for 2 seconds...
15:03:29.137000 Done!
15:03:29.137000 Waiting for 3 seconds...
15:03:32.120000 Done!

Ring

load "guilib.ring"

for n = 1 to 10
    Sleep(3)
    see "" + n + " "
next
see nl

func Sleep x
     nTime = x * 1000
     oTest = new qTest
     oTest.qsleep(nTime)

Output:

1 2 3 4 5 6 7 8 9 10

RPL

RPL code Comment
 ≪ 
   CLLD "Sleeping..." 1 DISP
   WAIT
   CLMF "Awake!" 
≫ ‘SLEEP’ STO  
SLEEP ( seconds  --  "Awake!" )
  clear screen and display message on top of screen
  sleep the given number of seconds 
  reactivate the stack display

Input:
10 SLEEP

Ruby

seconds = gets.to_f
puts "Sleeping..."
sleep(seconds) # number is in seconds ... but accepts fractions
# Minimum resolution is system dependent.
puts "Awake!"

Rust

use std::{io, time, thread};

fn main() {
    println!("How long should we sleep in milliseconds?");
    
    let mut sleep_string = String::new();

    io::stdin().read_line(&mut sleep_string)
               .expect("Failed to read line");

    let sleep_timer: u64 = sleep_string.trim()
                                       .parse()
                                       .expect("Not an integer");
    let sleep_duration = time::Duration::from_millis(sleep_timer);
    
    println!("Sleeping...");
    thread::sleep(sleep_duration);
    println!("Awake!");
}

Scala

Library: Scala
object Sleeper extends App {
  print("Enter sleep time in milli sec: ")
  val ms = scala.io.StdIn.readInt()
  println("Sleeping...")
  val sleepStarted = scala.compat.Platform.currentTime
  Thread.sleep(ms)
  println(s"Awaked after [${scala.compat.Platform.currentTime - sleepStarted} ms]1")
}

Scheme

Many Scheme implementations support srfi-18, a multithreading library which provides a 'thread-sleep!' function. The following works in Chicken Scheme:

(use format)
(use srfi-18)

(format #t "Enter a time (in seconds): ")
(let ((time (read))) ; converts input to a number, if possible
  (if (number? time)
    (begin
      (format #t "Sleeping...~&")
      (thread-sleep! time)
      (format #t "Awake!~&"))
    (format #t "You must enter a number~&")))

Scheme implementations also provide alternative approaches. For example, Chicken Scheme has a 'posix' library which includes a 'sleep' function.

Seed7

The duration.s7i library defines the function wait, which takes an argument of type duration. Functions to create durations with years, months, days, hours, minutes, seconds and micro seconds exist also.

$ include "seed7_05.s7i";
  include "duration.s7i";

const proc: main is func
  local
    var integer: secondsToSleep is 0;
  begin
    write("Enter number of seconds to sleep: ");
    readln(secondsToSleep);
    writeln("Sleeping...");
    wait(secondsToSleep . SECONDS);
    writeln("Awake!");
  end func;

SenseTalk

SenseTalk understands time durations expressed in any units, including: seconds, minutes, days, microseconds, shakes, and jiffies!

ask "How long would you like to sleep?" message "Your answer may include any duration, such as 5 seconds, 2 hours, or even 3 centuries!"
get the value of it

if it is a duration then
	put it into sleepyTime
else
	answer "Sorry, that wasn't a valid duration!"
	exit all
end if

put "Sleeping for " & sleepyTime & "..."
wait sleepyTime
put "Awake!"

Sidef

var sec = read(Number);       # any positive number (it may be fractional)
say "Sleeping...";
Sys.sleep(sec);               # in seconds
#Sys.usleep(sec);             # in microseconds
#Sys.nanosleep(sec);          # in nanoseconds
say "Awake!";

Smalltalk

Works with: Pharo
t := (FillInTheBlankMorph request: 'Enter time in seconds') asNumber.
Transcript show: 'Sleeping...'.
(Delay forSeconds: t) wait.
Transcript show: 'Awake!'.
Works with: Smalltalk/X
t := (Dialog request: 'Enter time in seconds') asNumber.
Transcript show: 'Sleeping...'.
(Delay forSeconds: t) wait.
Transcript show: 'Awake!'.

(of course, you can "Smalltalk at:#FillInTheBlankMorph put:Dialog", to be source compatible with Pharo)

SparForte

As a structured script.

#!/usr/local/bin/spar
pragma annotate( summary, "sleep_demo" );
pragma annotate( description, "Write a program that does the following in this order:" );
pragma annotate( description, "" );
pragma annotate( description, "* Input an amount of time to sleep in whatever units are" );
pragma annotate( description, "most natural for your language (milliseconds, seconds," );
pragma annotate( description, "ticks, etc.). This unit should be noted in comments or" );
pragma annotate( description, "in a description." );
pragma annotate( description, "* Print 'Sleeping...'" );
pragma annotate( description, "* Sleep the main thread for the given amount of time." );
pragma annotate( description, "* Print 'Awake!'" );
pragma annotate( description, "* End." );
pragma annotate( see_also, "http://rosettacode.org/wiki/Sleep" );
pragma annotate( author, "Ken O. Burtch" );
pragma license( unrestricted );

procedure sleep_demo is
  in_val : duration;
begin
  ? "Number of seconds to sleep?";
  in_val := numerics.value( get_line );

  -- Using delay
  ? "Sleeping...";
  delay in_val;
  ? "Awake!";

  -- Using Linux/UNIX sleep
  ? "Sleeping...";
  sleep "$in_val" ;
  ? "Awake!";
end sleep_demo;

Standard ML

(TextIO.print "input a number of seconds please: ";
let val seconds = valOf (Int.fromString (valOf (TextIO.inputLine TextIO.stdIn))) in
  TextIO.print "Sleeping...\n";
  OS.Process.sleep (Time.fromReal seconds);  (* it takes a Time.time data structure as arg,
                                               but in my implementation it seems to round down to the nearest second.
                                               I dunno why; it doesn't say anything about this in the documentation *)
  TextIO.print "Awake!\n"
end)

Stata

program sleep_awake
	* pass duration in milliseconds
	display "Sleeping..."
	sleep `0'
	display "Awake!"
end

sleep_awake 2000

Suneido

function (time)
    {
    Print("Sleeping...")
    Sleep(time) // time is in milliseconds
    Print("Awake!")
    }

Swift

import Foundation

println("Enter number of seconds to sleep")
let input = NSFileHandle.fileHandleWithStandardInput()
var amount = NSString(data:input.availableData, encoding: NSUTF8StringEncoding)?.intValue
var interval = NSTimeInterval(amount!)
println("Sleeping...")
NSThread.sleepForTimeInterval(interval)

println("Awake!")

Tcl

Blocking example (the process is blocked preventing any background activity).

puts -nonewline "Enter a number of milliseconds to sleep: "
flush stdout
set millis [gets stdin]
puts Sleeping...
after $millis
puts Awake!

A non-blocking example where background activity will occur.

puts -nonewline "Enter a number of milliseconds to sleep: "
flush stdout
set millis [gets stdin]
set ::wakupflag 0
puts Sleeping...
after $millis set ::wakeupflag 1
vwait ::wakeupflag
puts Awake!

TI-89 BASIC

This example is in need of improvement:

Do something less wasteful than a busy wait, if possible.

Local dur_secs,st0,st,seconds
Define seconds() = Func
  Local hms
  getTime()→hms
  Return ((hms[1] * 60 + hms[2]) * 60) + hms[3]
EndFunc
ClockOn
  
Prompt dur_secs
Disp "Sleeping..."
seconds()→st
st→st0
While when(st<st0, st+86400, st) - st0 < dur_secs
  seconds()→st
EndWhile
Disp "Awake!"

Toka

This makes use of the sleep() function from libc which suspends execution for a specified number of seconds.

1 import sleep as sleep()
[ ." Sleeping...\n" sleep() drop ." Awake!\n" bye ] is sleep

45 sleep

TUSCRIPT

$$ MODE TUSCRIPT
secondsrange=2
PRINT "Sleeping ",secondsrange," seconds "
WAIT #secondsrange
PRINT "Awake after Naping ",secondsrange, " seconds"

TXR

(let ((usec (progn (put-string "enter sleep usecs: ")
                   (tointz (get-line)))))
  (put-string "Sleeping ... ")
  (flush-stream)
  (usleep usec)
  (put-line "Awake!"))

UNIX Shell

printf "Enter a time in seconds to sleep: "
read seconds
echo "Sleeping..."
sleep "$seconds"
echo "Awake!"

This uses the sleep(1) command. POSIX sleep(1) only takes an integer, as in sleep 2, so you can only sleep for a whole number of seconds. Some systems extend sleep(1) to take a decimal fraction, as in sleep 2.5.

Ursa

out "Sleeping..." endl console
# sleep for 5 seconds (5000 milliseconds)
sleep 5000
out "Awake!" endl console

VBA

Function Sleep(iSecsWait As Integer)
Debug.Print Now(), "Sleeping..."
Application.Wait Now + iSecsWait / 86400 'Time is stored as fractions of 24 hour day
Debug.Print Now(), "Awake!"
End Function

VBScript

iSeconds=InputBox("Enter a time in seconds to sleep: ","Sleep Example for RosettaCode.org")    
WScript.Echo "Sleeping..."
WScript.Sleep iSeconds*1000		'Sleep is done in Milli-Seconds
WScript.Echo "Awake!"


Vedit macro language

#1 = Get_Num("Sleep time in 1/10 seconds: ")
Message("Sleeping...\n")
Sleep(#1)
Message("Awake!\n")

Visual Basic .NET

Module Program
    Sub Main()
        Dim millisecondsSleepTime = Integer.Parse(Console.ReadLine(), Globalization.CultureInfo.CurrentCulture)
        Console.WriteLine("Sleeping...")
        Threading.Thread.Sleep(millisecondsSleepTime)
        Console.WriteLine("Awake!")
    End Sub
End Module

V (Vlang)

import time
import os

fn main() {
    sec := os.input("Enter number of seconds to sleep: ").i64()
    println("Sleeping…")
    time.sleep(time.Duration(sec * time.second))
    println("Awake!")
}

Wren

import "timer" for Timer
import "io" for Stdin, Stdout

System.write("Enter time to sleep in seconds: ")
Stdout.flush()
var secs
while (true) {
    secs = Num.fromString(Stdin.readLine())
    if (secs == null) {
        System.print("Not a number try again.")
    } else break
}
System.print("Sleeping...")
Timer.sleep((secs*1000).floor)
System.print("Awake!")
Output:

Sample session:

Enter time to sleep in seconds: 10
Sleeping...
Awake!

X86 Assembly

NASM 2.15

%macro sysdef 2
  %define sys_%1        %2
%endmacro
sysdef write,           1
sysdef exit,            60
sysdef nanosleep,       35

%macro inv 1-7 0,0,0,0,0,0
  mov r9,%7
  mov r8,%6
  mov r10,%5
  mov rdx,%4
  mov rsi,%3
  mov rdi,%2
  mov rax,sys_%1
  syscall
%endmacro

section .data
  timeval:
    tv_sec   dq 0
    tv_nsec  dq 0

section .rodata
  str1 db "Sleeping",0xa,0
  str2 db "Awake!",0xa,0

section .text

  global main
  main:
    lea rbx, [rel str1]
    inv write, 1, rbx, 9
    mov qword [rel tv_sec], 5
    mov qword [rel tv_nsec], 0
    lea rax, [rel timeval]
    inv nanosleep, rax, 0
    lea rbx, [rel str2]
    inv write, 1, rbx, 7
    lea rbx, [rel str2]
    inv exit, 0
    ret


This sleep subroutine takes the number of seconds to sleep as a parameter. The actual linux syscall that I use to implement this takes a time struct (seconds at the first qword and nanoseconds at the second) as the first argument. Optionally you can pass another time stuct as a second argument. In the event that the sleep is interrupted by a system event, linux will fill this second struct with the remaining time so the syscall can be called again with the remaining sleep time.

; x86_64 linux nasm

section .text

Sleep:
  mov rsi, 0 ; we wont use the second sleep arg, pass null to syscall
  sub rsp, 16
  mov qword [rsp], rdi ; number of seconds the caller requested
  mov qword [rsp + 8], rsi ; we won't use the nanoseconds
  mov rdi, rsp ; pass the struct that's on the stack to
  mov rax, 35 ; sys_nanosleep
  syscall
  add rsp, 16 ; clean up stack
  ret

XPL0

int Microseconds;
[Microseconds:= IntIn(0);
Text(0, "Sleeping...^m^j");
DelayUS(Microseconds);
Text(0, "Awake!^m^j");
]

zig

const std = @import("std");
const time = std.time;
const warn = std.debug.warn;

pub fn main() void {
    warn("Sleeping...\n");

    time.sleep(1000000000); // `sleep` uses nanoseconds

    warn("Awake!\n");
}

zkl

seconds:=ask("Seconds to sleep: ").toFloat();
println("Sleeping...");
Atomic.sleep(seconds); # float, usually millisecond resolution
println("Awake!");

Zoomscript

For typing:

print "Sleeping..."
wait 1
println
print "Awake!"

For importing:

¶0¶print "Sleeping..."¶0¶wait 1¶0¶println¶0¶print "Awake!"