Create a two-dimensional array at runtime

From Rosetta Code
Revision as of 14:11, 28 August 2024 by Bernie (talk | contribs) (→‎{{header|FutureBasic}}: Changed 'fn StringIntegerValue' to 'intval')
Task
Create a two-dimensional array at runtime
You are encouraged to solve this task according to the task description, using any language you may know.

Data Structure
This illustrates a data structure, a means of storing data within a program.

You may see other such structures in the Data Structures category.

Get two integers from the user, then create a two-dimensional array where the two dimensions have the sizes given by those numbers, and which can be accessed in the most natural way possible. Write some element of that array, and then output that element. Finally destroy the array if not done by the language itself.

11l

V width = 3
V height = 5
V myarray = [[0] * width] * height
print(myarray[height-1][width-1])

68000 Assembly

The routine used to retrieve the input is left unimplemented.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Array setup
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Create_2D_Array:
ARRAY_2D equ $100000
ARRAY_POINTER_VARIABLE equ $200000
; input: D0 = width, D1 = height
; assume the input is byte length and unsigned, ranging from 1 to FF.

AND.L #$000000FF,D0
AND.L #$000000FF,D1 ;sanitize the input to byte length.

LEA ARRAY_2D,A0     ;get base array address.

;The array's size will be measured in bytes, as this is how memory offsetting is measured. 
;For this example the elements will all be 32-bit.
;Therefore, the dimensions need to be multiplied by the byte count of each element.

LSL.W #2,D0         ;four bytes per element = multiply by 4
LSL.W #2,D1

;Next, these values are multiplied to get the array's size.
MOVE.L D0,D2
MULU D1,D2
;D2 is the array's size (measured in bytes) and will be placed at the beginning. 
;This does not count as an element of the array for the purposes of row/column indexing.
;The array's base address will be offset by 4 bytes prior to any indexing.

MOVE.L D2,(A0)+     ;store D2 in A0, add 4 to A0
MOVEA.L A0,[ARRAY_POINTER_VARIABLE]

;the brackets are optional, they show that this is a memory address label.
;this is still a move to a memory address with or without the brackets.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Storing a value in the array
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

LEA ARRAY_POINTER_VARIABLE,A1    ;load the address where the array's base address is stored.
MOVE.L (A1),A1                   ;dereference the pointer and get ARRAY_2D+4 into A1.

; for this example the arbitrary row/column indices (2,5) will be used.

MOVE.L #2,D4
MULU D0,D4                       ;there are D0 entries per row, multiply row index by elements per row.
MOVE.L #5,D5 
MOVE.L #$00112233,D7             ;determine the value we want to store in the array.

; The bytes per element was factored into D0 when the array was created. So D4 is already where it should be.
LSL.L #2,D5                      ;column index still needs to be scaled by the bytes per element.

LEA (A1,D4),A1                   ;select the desired row.

;68000 doesn't allow you to use more than 1 data register at a time to offset. So we have to offset separately.
;Despite the use of parentheses this is NOT a dereference like it would be with "MOVE.L (A1),D7". D4 is merely added to the address in A1.

MOVE.L D7,(A1,D5)                ;store #$00112233 in row 2, column 5 of the array.     

;Loading a value is the same as storing it, except the operands in the last instruction are reversed, and MOVE.L #$00112233,D7
;is omitted.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Destroying the array
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; The array is destroyed by storing something else in its location. If you really want to reset it to zero, you can
; do so with the following:

LEA ARRAY_POINTER_VARIABLE,A1
MOVE.L (A1),A1
MOVE.L -(A1),D7                 
;get the array size into D7. Remember that the array's size was stored just before its data.
This value is potentially too large for a single DBRA, but it can be split up.

SWAP D7
MOVE.W D7,D6                    ;get the top half of D7 into D6. D6 will be the outer loop's DBRA value.
SWAP D7
SUBQ.L #1,D7                    ;D7 needs to be decremented by 1. D6 is fine the way it is.

MOVE.L (A0)+,D0                 ;dummy move to increment the pointer back to the array base.
MOVEQ #0,D0                     ;faster than MOVE.L #0,D0

loop_destroyArray:
MOVE.L D0,(A0)+
DBRA D7,loop_destroyArray       ;loop using bottom 2 bytes of the array size as a loop counter
DBRA D6,loop_destroyArray       ;decrement this, D7 is $FFFF each time execution gets here so this acts as a "carry" of sorts.
                                ;if this value was 0 prior to the loop, the loop ends immediately.

AArch64 Assembly

Works with: as version Raspberry Pi 3B version Buster 64 bits
or android 64 bits with application Termux
/* ARM assembly AARCH64 Raspberry PI 3B */
/*  program createarray264.s   */

/************************************/
/* Constantes                       */
/************************************/
/* for this file see task include a file in language AArch64 assembly*/
.include "../includeConstantesARM64.inc" 
.equ BUFFERSIZE,   64

/*********************************/
/* Initialized data              */
/*********************************/
.data
szMessRead1:         .asciz "Input size level 1 : "
szMessRead2:         .asciz "Input size level 2 : "
szMessIndice1:       .asciz "Indice 1 ="
szMessIndice2:       .asciz "  Indice 2 ="
szMessResult:        .asciz "  Item = "
szMessStart:         .asciz "Program 64 bits start.\n"
szCarriageReturn:    .asciz "\n"

/*********************************/
/* UnInitialized data            */
/*********************************/
.bss
sZoneConv:             .skip BUFFERSIZE   // conversion buffer
sZoneConv1:            .skip BUFFERSIZE   // conversion buffer
sZoneConv2:            .skip BUFFERSIZE   // conversion buffer
sBuffer:               .skip BUFFERSIZE

/*********************************/
/*  code section                 */
/*********************************/
.text
.global main 
main:                            // entry of program 
    ldr x0,qAdrszMessStart
    bl affichageMess
    ldr x0,qAdrszMessRead1
    bl affichageMess
    mov x0,#STDIN                // Linux input console
    ldr x1,qAdrsBuffer           // buffer address 
    mov x2,#BUFFERSIZE           // buffer size 
    mov x8,READ 
    svc 0                        // call system
    ldr x0,qAdrsBuffer           // buffer address 
    bl conversionAtoD
    mov x9,x0
    ldr x0,qAdrszMessRead2
    bl affichageMess
    mov x0,#STDIN                // Linux input console
    ldr x1,qAdrsBuffer           // buffer address 
    mov x2,#BUFFERSIZE           // buffer size 
    mov x8,READ 
    svc 0                        // call system
    ldr x0,qAdrsBuffer           // buffer address 
    bl conversionAtoD
    mov x10,x0
                                 // create array
    lsl x12,x10,#3               // compute size level 2
    mul x8,x12,x9                // compute size array
    tst x8,0xF                   // multiple of 16 ?
    add x11,x8,8                 // if no add 8 octets 
    csel x8,x8,x11,eq            // the stack must always be aligned on 16 bytes
                                 // in 64 assembly arm
    sub sp,sp,x8                 // reserve place on stack
    mov fp,sp                    // save array address
    mov x0,#0                    // init all items array
 1:                              // begin loop1
    mov x1,#0
 2:                              // begin loop2 
    mul x2,x0,x12
    add x2,x2,x1, lsl #3
    str x2,[fp,x2]               // store shift in array item
    add x1,x1,#1
    cmp x1,x10
    blt 2b
    add x0,x0,#1
    cmp x0,x9
    blt 1b
    mov x0,fp
    mov x1,#1                   // second indice level 1
    mov x2,#0                   // first  indice level 2
    mov x3,x12                  // level 2 size
    bl displayItem
    mov x0,fp
    sub x1,x9,#1                // last level 1
    sub x2,x10,#1               // last level 2
    mov x3,x12                  // level 2 size
    bl displayItem

    add sp,sp,x8                // release space on stack
 
100:                             // standard end of the program 
    mov x0, #0                   // return code
    mov x8,EXIT 
    svc #0                       // perform the system call
    
qAdrszCarriageReturn:        .quad szCarriageReturn
qAdrsZoneConv:               .quad sZoneConv
qAdrsZoneConv1:              .quad sZoneConv1
qAdrsZoneConv2:              .quad sZoneConv2
qAdrszMessRead1:             .quad szMessRead1 
qAdrszMessRead2:             .quad szMessRead2 
qAdrsBuffer:                 .quad sBuffer
qAdrszMessResult:            .quad szMessResult
qAdrszMessStart:             .quad szMessStart
qAdrszMessIndice1:           .quad szMessIndice1
qAdrszMessIndice2:           .quad szMessIndice2
/***************************************************/
/*   display array item                    */
/***************************************************/
/* x0  array address */
/* x1  indice 1 */
/* x2 indice 2 */
/* x3 level 2 size */
displayItem:
    stp x1,lr,[sp,-16]!          // save  registers 
    stp x2,x3,[sp,-16]!          // save  registers 
    stp x4,x5,[sp,-16]!          // save  registers 
    stp x6,fp,[sp,-16]!          // save  registers 
    mov x5,x0
    mov x6,x1
    mov x0,x6
    ldr x1,qAdrsZoneConv 
    bl conversion10              // conversion indice 1
    mov x0,x2
    ldr x1,qAdrsZoneConv1 
    bl conversion10              // conversion indice 2
    mul x4,x6,x3                 // multiply indice level 1 by level 2 size
    add x4,x4,x2, lsl #3         // add indice level 2 * 8 (8 bytes) 
    ldr x0,[x5,x4]               // load array item 
    ldr x1,qAdrsZoneConv2 
    bl conversion10
    mov x0,#7                    // string number to display
    ldr x1,qAdrszMessIndice1
    ldr x2,qAdrsZoneConv         // insert conversion in message
    ldr x3,qAdrszMessIndice2
    ldr x4,qAdrsZoneConv1        // insert conversion in message
    ldr x5,qAdrszMessResult
    ldr x6,qAdrsZoneConv2        // insert conversion in message
    ldr x7,qAdrszCarriageReturn
    bl displayStrings            // display message
100:
    ldp x6,fp,[sp],16            // restaur  registers 
    ldp x4,x5,[sp],16            // restaur  registers 
    ldp x2,x3,[sp],16            // restaur  registers 
    ldp x1,lr,[sp],16            // restaur  registers
    ret 
/***************************************************/
/*   display multi strings                         */
/*   new version 24/05/2023                        */
/***************************************************/
/* x0  contains number strings address */
/* x1 address string1 */
/* x2 address string2 */
/* x3 address string3 */
/* x4 address string4 */
/* x5 address string5 */
/* x6 address string5 */
/* x7 address string6 */
displayStrings:            // INFO:  displayStrings
    stp x8,lr,[sp,-16]!    // save  registers 
    stp x2,fp,[sp,-16]!    // save  registers 
    add fp,sp,#32          // save paraméters address (4 registers saved * 8 bytes)
    mov x8,x0              // save strings number
    cmp x8,#0              // 0 string -> end
    ble 100f
    mov x0,x1              // string 1
    bl affichageMess
    cmp x8,#1              // number > 1
    ble 100f
    mov x0,x2
    bl affichageMess
    cmp x8,#2
    ble 100f
    mov x0,x3
    bl affichageMess
    cmp x8,#3
    ble 100f
    mov x0,x4
    bl affichageMess
    cmp x8,#4
    ble 100f
    mov x0,x5
    bl affichageMess
    cmp x8,#5
    ble 100f
    mov x0,x6
    bl affichageMess
    cmp x8,#6
    ble 100f
    mov x0,x7
    bl affichageMess
    
100:
    ldp x2,fp,[sp],16        // restaur  registers 
    ldp x8,lr,[sp],16        // restaur  registers
    ret

/***************************************************/
/*      ROUTINES INCLUDE                           */
/***************************************************/
/* for this file see task include a file in language AArch64 assembly*/
.include "../includeARM64.inc"
Output:
Program 64 bits start.
Input size level 1 : 10
Input size level 2 : 10
Indice 1 =1  Indice 2 =0  Item = 80
Indice 1 =9  Indice 2 =9  Item = 792

Action!

The user must type in the monitor the following command after compilation and before running the program!

SET EndProg=*
CARD EndProg ;required for ALLOCATE.ACT

INCLUDE "D2:ALLOCATE.ACT" ;from the Action! Tool Kit. You must type 'SET EndProg=*' from the monitor after compiling, but before running this program!

DEFINE PTR="CARD"
DEFINE INT_SIZE="2"
DEFINE CARD_SIZE="2"
TYPE IntArray2D=[BYTE rows,cols PTR p]

BYTE FUNC GetNumber(CHAR ARRAY s)
  BYTE n,min=[1],max=[100]

  DO
    PrintF("Get number of %S (%B..%B): ",s,min,max)
    n=InputB()
    IF n>=min AND n<=max THEN
      EXIT
    FI
  OD
RETURN (n)

PROC Create(IntArray2D POINTER a)
  PTR ARRAY rowArray
  BYTE row

  IF a.p#0 THEN Break() FI
  rowArray=Alloc(a.rows*CARD_SIZE)
  a.p=rowArray
  FOR row=0 TO a.rows-1
  DO
    rowArray(row)=Alloc(a.cols*INT_SIZE)
  OD
RETURN

PROC Destroy(IntArray2D POINTER a)
  PTR ARRAY rowArray
  BYTE row

  IF a.p=0 THEN Break() FI
  rowArray=a.p
  FOR row=0 TO a.rows-1
  DO
    Free(rowArray(row),a.cols*INT_SIZE)
  OD
  Free(a.p,a.rows*CARD_SIZE)
  a.p=0
RETURN

PROC SetValue(IntArray2D POINTER a BYTE row,col INT v)
  PTR ARRAY rowArray
  INT ARRAY colArray

  IF a.p=0 OR row>=a.rows OR col>=a.cols THEN
    Break()
  FI
  rowArray=a.p
  colArray=rowArray(row)
  colArray(col)=v
RETURN

INT FUNC GetValue(IntArray2D POINTER a BYTE row,col)
  PTR ARRAY rowArray
  INT ARRAY colArray

  IF a.p=0 OR row>=a.rows OR col>=a.cols THEN
    Break()
  FI
  rowArray=a.p
  colArray=rowArray(row)
RETURN (colArray(col))

PROC TestCreate(IntArray2D POINTER a)
  PrintF("Create array of %B rows and %B cols%E",a.rows,a.cols)
  Create(a)
RETURN

PROC TestDestroy(IntArray2D POINTER a)
  PrintF("Destroy array of %B rows and %B cols%E",a.rows,a.cols)
  Destroy(a)
RETURN

PROC TestSetValue(IntArray2D POINTER a BYTE row,col INT v)
  PrintF("Write %I to row %B and col %B%E",v,row,col)
  SetValue(a,row,col,v)
RETURN

PROC TestGetValue(IntArray2D POINTER a BYTE row,col)
  INT v

  v=GetValue(a,row,col)
  PrintF("Read at row %B and col %B: %I%E",row,col,v)
RETURN

PROC Main()
  IntArray2D a

  Put(125) PutE() ;clear screen
  AllocInit(0)

  a.rows=GetNumber("rows")
  a.cols=GetNumber("cols")
  a.p=0

  TestCreate(a)
  TestSetValue(a,a.rows/2,a.cols/2,6502)
  TestGetValue(a,a.rows/2,a.cols/2)
  TestDestroy(a)
RETURN
Output:

Screenshot from Atari 8-bit computer

Get number of rows (1..100): 80
Get number of cols (1..100): 90
Create array of 80 rows and 90 cols
Write 6502 to row 40 and col 45
Read at row 40 and col 45: 6502
Destroy array of 80 rows and 90 cols

Ada

with Ada.Text_Io;
with Ada.Float_Text_Io;
with Ada.Integer_Text_Io;

procedure Two_Dimensional_Arrays is
   type Matrix_Type is array(Positive range <>, Positive range <>) of Float;
   Dim_1 : Positive;
   Dim_2 : Positive;
begin
   Ada.Integer_Text_Io.Get(Item => Dim_1);
   Ada.Integer_Text_Io.Get(Item => Dim_2);
   -- Create an inner block with the correctly sized array
   declare
      Matrix : Matrix_Type(1..Dim_1, 1..Dim_2);
   begin
      Matrix(1, Dim_2) := 3.14159;
      Ada.Float_Text_Io.Put(Item => Matrix(1, Dim_2), Fore => 1, Aft => 5, Exp => 0);
      Ada.Text_Io.New_Line;
   end;
   -- The variable Matrix is popped off the stack automatically
end Two_Dimensional_Arrays;

ALGOL 60

 begin
    comment Create a two-dimensional array at runtime - Algol 60;
    integer n,m;
    ininteger(0,m);
    ininteger(0,n);
    begin
        integer array a[1:m,1:n];
        a[m,n] := 99;
        outinteger(1,a[m,n]);
		outstring(1,"\n")
    end;
    comment array a : out of scope;
end
Input:
5
5
Output:
 99


ALGOL 68

main:(
  print("Input two positive whole numbers separated by space and press newline:");
  [read int,read int] INT array;
  array[1,1]:=42;
  print (array[1,1])
)

ALGOL-M

begin

integer first, second;

write("Two Dimensional Array Exercise");
write("Length of first dimension:");
read(first);
write("Length of second dimension:");
read(second);

begin % we need to start a new block %
   integer array test[1:first, 1:second];
   test[1,1] := 99;
   write("Stored value at 1,1 =",test[1,1]);
end; % array is now out of scope %

end
Output:
Two Dimensional Array Exercise
Length of first dimension:
->6
Length of second dimension:
->7
Stored value at 1,1 =    99


ALGOL W

begin
    integer dimension1UpperBound, dimension2UpperBound;
    write( "upper bound for dimension 1: " );
    read( dimension1UpperBound );
    write( "upper bound for dimension 2: " );
    read( dimension2UpperBound );

    begin
        % we start a new block because declarations must precede statements %
        % and variables in array bounds must be from outside the block      %
        integer array matrix ( 1 :: dimension1UpperBound
                             , 1 :: dimension2UpperBound
                             );
        % set the first element - the program will crash if the user input  %
        % upper bounds less than 1                                          %
        matrix( 1, 1 ) := 3;
        % write it                                                          %
        write( matrix( 1, 1 ) );
        % the array is automatically deleted when the block ends            %
    end

end.

Amazing Hopper

Amazing Hopper crea arrays de forma dinámica.

#include <flow.h>
#import   lib/input.bas.lib
#include  include/flow-input.h

DEF-MAIN
   CLR-SCR
   MSET(nRow, nCol)
   LOCATE( 2,5 ), PRN("Input size rows :")
   LOC-COL( 23 ), LET( nRow := ABS(VAL(READ-NUMBER( nRow ) )))
   LOCATE( 3,5 ), PRN("Input size cols :")
   LOC-COL( 23 ), LET( nCol := ABS(VAL(READ-NUMBER( nCol ) )))
   
   COND( IS-NOT-ZERO?( MUL(nRow,nCol) ) )
      DIM(nRow, nCol) AS-VOID( array )
      BLK-[1,1], {100} PUT(array)
                 PRNL("\tElement at position 1,1 : ", GET(array) )
      CLEAR(array)  /* destroy array */
   CEND
END
SUBRUTINES
Output:
    Input size rows : 30 
    Input size cols : 30 
	Element at position 1,1 : 100

APL

Arrays are an integral part of APL. Array size, shape, and data type can be easily manipulated at runtime.

arraym n  0 ⍝ array of zeros with shape of m by n.

array[1;1]73 ⍝ assign a value to location 1;1.

array[1;1] ⍝ read the value back out

⎕ex 'array' ⍝ erase the array

AppleScript

AppleScript has no array, but an AppleScript list can be used in a multidimensional fashion. There's no issue with their dimensions, they grow while adding elements. Memory allocation is dynamic.

set R to text returned of (display dialog "Enter number of rows:" default answer 2) as integer
set c to text returned of (display dialog "Enter number of columns:" default answer 2) as integer
set array to {}
repeat with i from 1 to R
	set temp to {}
	repeat with j from 1 to c
		set temp's end to 0
	end repeat
	set array's end to temp
end repeat

-- Address the first column of the first row:
set array's item 1's item 1 to -10

-- Negative index values can be used to address from the end:
set array's item -1's item -1 to 10

-- Access an item (row 2 column 1):
set x to array's item 2's item 1

return array

-- Destroy array (typically unnecessary since it'll automatically be destroyed once script ends).
set array to {}

To correct the last comment in the script above: when a script's run, the values of its properties, globals, and run-handler (ie. top level) variables are saved back to the script file when the execution finishes. So variables containing bulky values like lists ideally should be set to something smaller before the end in order to prevent file bloat. Or local variables could be used, which would be the better option above as the return statement prevents the last line from being executed anyway.

ARM Assembly

Works with: as version Raspberry Pi
or android 32 bits with application Termux
/* ARM assembly Raspberry PI  */
/*  program createarray2.s   */

 /* REMARK 1 : this program use routines in a include file 
   see task Include a file language arm assembly 
   for the routine affichageMess conversion10 
   see at end of this program the instruction include */
   
/* for constantes see task include a file in arm assembly */
/************************************/
/* Constantes                       */
/************************************/
.include "../constantes.inc"
.equ STDIN,      0       @ Linux input console
.equ READ,       3       @ Linux syscall
.equ BUFFERSIZE,   64

/*********************************/
/* Initialized data              */
/*********************************/
.data
szMessRead1:         .asciz "Input size level 1 : "
szMessRead2:         .asciz "Input size level 2 : "
szMessIndice1:       .asciz "Indice 1 ="
szMessIndice2:       .asciz "Indice 2 ="
szMessResult:         .asciz "Item = "
szMessStart:          .asciz "Program 32 bits start.\n"
szCarriageReturn:     .asciz "\n"

/*********************************/
/* UnInitialized data            */
/*********************************/
.bss
sZoneConv:             .skip BUFFERSIZE   // conversion buffer
sZoneConv1:            .skip BUFFERSIZE   // conversion buffer
sZoneConv2:            .skip BUFFERSIZE   // conversion buffer
sBuffer:               .skip BUFFERSIZE

/*********************************/
/*  code section                 */
/*********************************/
.text
.global main 
main:                            @ entry of program 
    ldr r0,iAdrszMessStart
    bl affichageMess
    ldr r0,iAdrszMessRead1
    bl affichageMess
    mov r0,#STDIN                @ Linux input console
    ldr r1,iAdrsBuffer           @ buffer address 
    mov r2,#BUFFERSIZE           @ buffer size 
    mov r7,#READ                 @ request to read datas
    svc 0                        @ call system
    ldr r0,iAdrsBuffer           @ buffer address 
    bl conversionAtoD
    mov r9,r0
    ldr r0,iAdrszMessRead2
    bl affichageMess
    mov r0,#STDIN                @ Linux input console
    ldr r1,iAdrsBuffer           @ buffer address 
    mov r2,#BUFFERSIZE           @ buffer size 
    mov r7,#READ                 @ request to read datas
    svc 0                        @ call system
    ldr r0,iAdrsBuffer           @ buffer address 
    bl conversionAtoD
    mov r10,r0
                                 @ create array
    lsl r12,r10,#2               @ compute size level 2
    mul r8,r12,r9                @ compute size array
    sub sp,sp,r8                 @ reserve place on stack
    mov fp,sp
    mov r0,#0                    @ init all items array
 1:                              @ begin loop1
    mov r1,#0
 2:                              @ begin loop2 
    mul r2,r0,r12
    add r2,r2,r1, lsl #2
    str r2,[fp,r2]               @ store shift in array item
    add r1,r1,#1
    cmp r1,r10
    blt 2b
    add r0,r0,#1
    cmp r0,r9
    blt 1b
    
    mov r0,fp
    mov r1,#1                   @ second indice level 1
    mov r2,#0                   @ first  indice level 2
    mov r3,r12                  @ level 2 size
    bl displayItem
    mov r0,fp
    sub r1,r9,#1                @ last level 1
    sub r2,r10,#1               @ last level 2
    mov r3,r12                  @ level 2 size
    bl displayItem

    add sp,sp,r8                @ release space on stack
 
100:                             @ standard end of the program 
    mov r0, #0                   @ return code
    mov r7, #EXIT                @ request to exit program
    svc #0                       @ perform the system call
    
iAdrszCarriageReturn:        .int szCarriageReturn
iAdrsZoneConv:               .int sZoneConv
iAdrsZoneConv1:              .int sZoneConv1
iAdrsZoneConv2:              .int sZoneConv2
iAdrszMessRead1:             .int szMessRead1 
iAdrszMessRead2:             .int szMessRead2 
iAdrsBuffer:                 .int sBuffer
iAdrszMessResult:            .int szMessResult
iAdrszMessStart:             .int szMessStart
iAdrszMessIndice1:           .int szMessIndice1
iAdrszMessIndice2:           .int szMessIndice2
/***************************************************/
/*   display array item                    */
/***************************************************/
/* r0  array address */
/* r1  indice 1 */
/* r2 indice 2 */
/* r3 level 2 size */
displayItem:
    push {r1-r6,lr}              @ save des registres
    mov r5,r0
    mov r6,r1
    mov r0,r6
    ldr r1,iAdrsZoneConv 
    bl conversion10              @ conversion indice 1
    mov r0,r2
    ldr r1,iAdrsZoneConv1 
    bl conversion10              @ conversion indice 2
    mul r4,r6,r3                 @ multiply indice level 1 by level 2 size
    add r4,r4,r2, lsl #2         @ add indice level 2 * 4 (4 bytes) 
    ldr r0,[r5,r4]               @ load array item 
    ldr r1,iAdrsZoneConv2 
    bl conversion10
    mov r0,#7                    @ string number to display
    ldr r1,iAdrszMessIndice1
    ldr r2,iAdrsZoneConv         @ insert conversion in message
    ldr r3,iAdrszMessIndice2
    ldr r4,iAdrsZoneConv1        @ insert conversion in message
    push {r4}
    ldr r4,iAdrszMessResult
    push {r4}
    ldr r4,iAdrsZoneConv2        @ insert conversion in message
    push {r4}
    ldr r4,iAdrszCarriageReturn
    push {r4}
    bl displayStrings            @ display message
    add sp,sp,#16
100:
    pop {r1-r6,pc}  
/***************************************************/
/*   display multi strings                    */
/***************************************************/
/* r0  contains number strings address */
/* r1 address string1 */
/* r2 address string2 */
/* r3 address string3 */
/* other address on the stack */
/* thinck to add  number other address * 4 to add to the stack */
displayStrings:            @ INFO:  displayStrings
    push {r1-r4,fp,lr}     @ save des registres
    add fp,sp,#24          @ save paraméters address (6 registers saved * 4 bytes)
    mov r4,r0              @ save strings number
    cmp r4,#0              @ 0 string -> end
    ble 100f
    mov r0,r1              @ string 1
    bl affichageMess
    cmp r4,#1              @ number > 1
    ble 100f
    mov r0,r2
    bl affichageMess
    cmp r4,#2
    ble 100f
    mov r0,r3
    bl affichageMess
    cmp r4,#3
    ble 100f
    mov r3,#3
    sub r2,r4,#4
1:                         @ loop extract address string on stack
    ldr r0,[fp,r2,lsl #2]
    bl affichageMess
    subs r2,#1
    bge 1b
100:
    pop {r1-r4,fp,pc}

/***************************************************/
/*      ROUTINES INCLUDE                           */
/***************************************************/
.include "../affichage.inc"
Output:
Program 32 bits start.
Input size level 1 : 10
Input size level 2 : 5
Indice 1 =1          Indice 2 =0          Item = 20
Indice 1 =9          Indice 2 =4          Item = 196

Arturo

width: to :integer input "give me the array's width: "
height: to :integer input "give me the array's height: "

arr: array.of: @[width height] 0

x: random 0 dec width
y: random 0 dec height

arr\[x]\[y]: 123

print ["item at [" x "," y "] =" arr\[x]\[y]]
Output:
give me the array's width: 10
give me the array's height: 2
item at [ 9 , 0 ] = 123

AutoHotkey

Works with: AutoHotkey_L
Array := []
InputBox, data,, Enter two integers separated by a Space:`n(ex. 5 7)
StringSplit, i, data, %A_Space%
Array[i1,i2] := "that element"
MsgBox, % "Array[" i1 "," i2 "] = " Array[i1,i2]

AutoIt

; == get dimensions from user input
$sInput = InputBox('2D Array Creation', 'Input comma separated count of rows and columns, i.e. "5,3"')
$aDimension = StringSplit($sInput, ',', 2)

; == create array
Dim $a2D[ $aDimension[0] ][ $aDimension[1] ]

; == write value to last row/last column
$a2D[ UBound($a2D) -1 ][ UBound($a2D, 2) -1 ] = 'test string'

; == output this value to MsgBox
MsgBox(0, 'Output', 'row[' & UBound($a2D) -1 & '], col[' & UBound($a2D, 2) -1 & ']' & @CRLF & '= ' & $a2D[ UBound($a2D) -1 ][ UBound($a2D, 2) -1 ] )

AWK

AWK has no multidimensional array; but AWK arrays (which are Associative array indeed) can be used also in a multidimensional fashion. Since AWK arrays are associative arrays, there's no issue in their dimensions: they grow while adding new key-value pair.

/[0-9]+ [0-9]+/ {
  for(i=0; i < $1; i++) {
    for(j=0; j < $2; j++) {
      arr[i, j] = i*j
    }
  }

  # how to scan "multidim" array as explained in the GNU AWK manual
  for (comb in arr) {
    split(comb, idx, SUBSEP)
    print idx[1] "," idx[2] "->" arr[idx[1], idx[2]]
  }
}

BASIC

Applesoft BASIC

10 INPUT "ENTER TWO INTEGERS:"; X%, Y%
20 DIM A%(X% - 1, Y% - 1)
30 X% = RND(1) * X%
40 Y% = RND(1) * Y%
50 A%(X%, Y%) = -32767
60 PRINT A%(X%, Y%)
70 CLEAR

BASIC256

arraybase 1
input integer "Enter one positive integer: ", i
input integer "Enter other positive integer: ", j
dim a(i, j)
a[i, j] = i * j
print "a("; string(i); ","; string(j); ") = "; a[i, j]
end

Chipmunk Basic

Works with: Chipmunk Basic version 3.6.4
10 input "Enter two positive integers, separated by a comma? ";i,j
20 dim array(i,j)
30 array(i,j) = i*j
40 print "a(";str$(i);",";str$(j);") = ";array(i,j)
50 erase array

GW-BASIC

Works with: PC-BASIC version any
Works with: BASICA
Works with: QBasic
Works with: MSX BASIC
10 INPUT "Enter two positive integers, separated by a comma"; I, J
20 DIM ARRAY(I, J)
30 ARRAY(I, J) = I * J
40 PRINT "a("; STR$(I); ","; STR$(J); " ) ="; ARRAY(I, J)
50 ERASE ARRAY

Minimal BASIC

10 PRINT "ENTER ONE POSITIVE INTEGER: "
20 INPUT I
30 PRINT "ENTER OTHER POSITIVE INTEGER: "
40 INPUT J
50 LET A(I,J) = I*J
60 PRINT "A(";I;",";J;") = ";A(I,J)
70 END

MSX Basic

Works with: MSX BASIC version any
Works with: GW-BASIC

The GW-BASIC solution works without any changes.

QBasic

Works with: QBasic version 1.1
Works with: QuickBasic version 4.5
INPUT "Enter two positive integers, separated by a comma"; i, j
DIM array(1 TO i, 1 TO j)
array(i, j) = i * j
PRINT "a("; STR$(i); ","; STR$(j); " ) = "; array(i, j)
ERASE array

True BASIC

INPUT prompt "Enter two positive integers, separated by a comma ": i, j
DIM array(0,0)
MAT REDIM array(1 TO i, 1 TO j)
LET array(i, j) = i*j
PRINT "a("; STR$(i); ","; STR$(j); ") ="; array(i, j)
MAT REDIM array(0,0)
END

XBasic

Works with: Windows XBasic
PROGRAM	"Create a two-dimensional array at runtime"
VERSION	"0.0001"

DECLARE FUNCTION  Entry ()

FUNCTION  Entry ()
	i$ = INLINE$("Enter one positive integer: ")
	j$ = INLINE$("Enter other positive integer: ")
	i = SSHORT(i$)
	j = SSHORT(j$)
	DIM a[i, j]
	a[i, j] = i * j
	PRINT "a("; STRING(i); ", "; STRING(j); ") ="; a[i, j]
END FUNCTION

Yabasic

input "Enter one positive integer: " i
input "Enter other positive integer: " j
dim a(i, j)
a(i, j) = i * j
print "a(", str$(i), ",", str$(j), ") = ", a(i, j)
exit

BBC BASIC

      INPUT "Enter array dimensions separated by a comma: " a%, b%
      
      DIM array(a%, b%)
      array(1, 1) = PI
      PRINT array(1, 1)

Commodore BASIC

Note: Size of array may be limited by RAM availability in some Commodore machines.

10 print chr$(147);chr$(14);
15 print "Size of array:"
20 print "Columns (1-20)";:input x%
25 if x%<1 or x%>20 then print "Try again.":goto 20
30 print "Rows (1-20)";:input y%
35 if y%<1 or y%>20 then print "Try again.":goto 30
40 x%=x%-1:y%=y%-1:dim a$(x%,y%)
50 nx=int(rnd(1)*x%):ny=int(rnd(1)*y%)
60 a$(nx,ny)="X"
70 print "Element";nx;",";ny;"= '";a$(nx,ny);"'"
80 clr:rem clear variables from ram
Output:
Size of array:
Columns (1-20)? 10
Rows (1-20)? 10
Element 6 , 3 = 'X'

ready.
print a$(6,3)


ready.

FreeBASIC

' FB 1.05.0 Win64

Dim As Integer i, j
Input "Enter two positive integers, separated by a comma"; i, j
Dim a(1 To i, 1 To j) As Integer
a(i, j) = i * j
Print "a("; Str(i); ","; Str(j); ") ="; a(i, j)
Erase a
Print
Print "Press any key to quit"
Sleep
Output:
Enter two positive integers, separated by a comma? 4, 7
a(4,7) = 28

IS-BASIC

100 INPUT PROMPT "Enter array dimensions separated by a coma: ":A,B
110 NUMERIC ARRAY(1 TO A,1 TO B)
120 LET ARRAY(1,1)=PI
130 PRINT ARRAY(1,1)

Liberty BASIC

Arrays can hold numbers ( eg age( 100)( or strings ( eg name$( 100)) LB arrays can only be one or two dimensioned. If an array is not DIMensioned explicitly, then the array will be limited to 11 elements, 0 to 10. Non DIMensioned double subscript arrays will be limited to 100 elements 0 to 9 by 0 to 9. The DIM statement can be followed by a list of arrays to be dimensioned, separated by commas. REDIM redimensions an already dimensioned array and clears all elements to zero (or to an empty string in the case of string arrays). This can be very useful for writing applications that have data sets of unknown size. If you dimension arrays that are extra large to make sure you can hold data, but only have a small set of data, then all the space you reserved is wasted. This hurts performance, because memory is set aside for the number of elements in the DIM statement.

input "Enter first  array dimension "; a
input "Enter second array dimension "; b

dim array( a, b)

array( 1, 1) = 123.456
print array( 1, 1)

end

PureBasic

If OpenConsole()
  Define x, y

  Print("Input X-Size: ")
  x = Val(Input())

  Print("Input Y-Size: ")
  y = Val(Input())

  Dim a(x,y)   ; Should really check if x & y are larger then 1, but that would be less fun....
  
  a(1,1)=Random(1000)
  PrintN("a(1,1)= " + Str(a(1,1)) )
  
  PrintN("Press ENTER to exit"):Input()
  End          ; Close down and let PureBasic delete the Console and all variables.
EndIf

QuickBASIC

Works with: QBasic version 1.1
Works with: QuickBasic version 4.5
 CLS
 INPUT a, b 'inputs need to be separated by commas
 DIM array (1 TO a, 1 TO b)
 array(1,1) = 42
 PRINT array(1,1)
 ERASE array

Run BASIC

print "Enter array 1 greater than 0"; : input a1
print "Enter array 2 greater than 0"; : input a2
 
dim chrArray$(max(a1,1),max(a2,1))
dim numArray(max(a1,1),max(a2,1))

chrArray$(1,1) = "Hello"
numArray(1,1)  = 987.2
print chrArray$(1,1);" ";numArray(1,1)

Sinclair ZX81 BASIC

Arrays are indexed from 1; the only limit on their size (which may be an exigent limit) is the available memory. We create an array, write to a randomly selected element and then print it out, and finally use CLEAR to destroy the array (and all the other variables in the program).

 10 PRINT "1ST DIMENSION: ";
 20 INPUT D1
 30 PRINT D1
 40 PRINT "2ND DIMENSION: ";
 50 INPUT D2
 60 PRINT D2
 70 DIM A(D1,D1)
 80 PRINT "ARRAY CREATED"
 90 LET X=1+INT (D1*RND)
100 LET Y=1+INT (D2*RND)
110 LET A(X,Y)=37
120 PRINT "ITEM ";X;", ";Y;" = ";A(X,Y)
130 CLEAR
140 PRINT "ARRAY DESTROYED"
Output:
1ST DIMENSION: 11
2ND DIMENSION: 6
ARRAY CREATED
ITEM 7, 4 = 37
ARRAY DESTROYED

Sinclair ZX Spectrum BASIC

10 INPUT "Size? ";rows;"*";columns
20 DIM a(rows,columns): REM defines a numeric array
30 LET a=INT (RND*rows)+1: LET c=INT (RND*columns+1): REM the array is labelled a, but the letter a is still available for variable assignment
40 LET a(a,c)=1
50 PRINT a(a,c)
60 DIM a(1): REM arrays cannot be removed without CLEARing the entire variable space, but redimensioning them to 1 will save most of the space they used

TI-83 BASIC

Input "ROWS? ",R
Input "COLS? ",C
{R,C}→dim([A])
42→[A](1,1)
Disp [A](1,1)
DelVar [A]

Visual Basic .NET

Module Program
    Sub Main()
        Console.WriteLine("Enter two space-delimited integers:")
        Dim input = Console.ReadLine().Split()
        Dim rows = Integer.Parse(input(0))
        Dim cols = Integer.Parse(input(1))

        ' VB uses max-index for array creation.
        Dim arr(rows - 1, cols - 1) As Integer

        arr(0, 0) = 2
        Console.WriteLine(arr(0, 0))
    End Sub
End Module
Output:
Enter two space-delimited integers:
5 42
2

BQN

Works with: [CBQN]
#!/usr/bin/env bqn

# Cut 𝕩 at occurrences of 𝕨, removing separators and empty segments
# (BQNcrate phrase).
Split  (¬-˜⊢×·+`»>)≠⊔⊢

# Natural number from base-10 digits (BQNcrate phrase).
Base10  10×+˜´

# Parse any number of space-separated numbers from string 𝕩.
ParseNums  {Base10¨ -'0' ' ' Split 𝕩}

# •GetLine is a nonstandard CBQN extension.
•Show (↕×´) ParseNums •GetLine@
Output:
4 2
┌─     
╵ 0 1  
  2 3  
  4 5  
  6 7  
      ┘

C

C99

Works with: C99
#include <stdio.h>

int main(int argc, char **argv) {

   int user1 = 0, user2 = 0;
   printf("Enter two integers.  Space delimited, please:  ");
   scanf("%d %d",&user1, &user2);
   int array[user1][user2];
   array[user1/2][user2/2] = user1 + user2;
   printf("array[%d][%d] is %d\n",user1/2,user2/2,array[user1/2][user2/2]);

   return 0;
}

Traditional Style

Allocate multi-dimensional arrays with a single call to malloc. The demonstration code builds a rank 3 array.

/*
  assume this file is c.c ,
  compile and run on linux: cc -Wall -g -DCOMPILE_EXAMPLE c.c -lm -o c && ./c
*/

#include<stdlib.h>
#include<stdio.h>

static void error(int status, char*message) {
  fprintf(stderr,"\n%s\n",message);
  exit(status);
}

static void*dwlcalloc(int n,size_t bytes) {
  void*rv = (void*)calloc(n,bytes);
  if (NULL == rv)
    error(1, "memory allocation failure");
  return rv;
}

void*allocarray(size_t rank,size_t*shape,size_t itemSize) {
  /*
     Allocates arbitrary dimensional arrays (and inits all pointers)
     with only 1 call to malloc.  Lambert Electronics, USA, NY.
     This is wonderful because one only need call free once to deallocate
     the space.  Special routines for each size array are not need for
     allocation of for deallocation.  Also calls to malloc might be expensive
     because they might have to place operating system requests.  One call
     seems optimal.
  */
  size_t size,i,j,dataSpace,pointerSpace,pointers,nextLevelIncrement;
  char*memory,*pc,*nextpc;
  if (rank < 2) {
    if (rank < 0)
      error(1,"invalid negative rank argument passed to allocarray");
    size = rank < 1 ? 1 : *shape;
    return dwlcalloc(size,itemSize);
  }
  pointerSpace = 0, dataSpace = 1;
  for (i = 0; i < rank-1; ++i)
    pointerSpace += (dataSpace *= shape[i]);
  pointerSpace *= sizeof(char*);
  dataSpace *= shape[i]*itemSize;
  memory = pc = dwlcalloc(1,pointerSpace+dataSpace);
  pointers = 1;
  for (i = 0; i < rank-2; ) {
    nextpc = pc + (pointers *= shape[i])*sizeof(char*);
    nextLevelIncrement = shape[++i]*sizeof(char*);
    for (j = 0; j < pointers; ++j)
      *((char**)pc) = nextpc, pc+=sizeof(char*), nextpc += nextLevelIncrement;
  }
  nextpc = pc + (pointers *= shape[i])*sizeof(char*);
  nextLevelIncrement = shape[++i]*itemSize;
  for (j = 0; j < pointers; ++j)
    *((char**)pc) = nextpc, pc+=sizeof(char*), nextpc += nextLevelIncrement;
  return memory;
}

#ifdef COMPILE_EXAMPLE

#include<string.h>
#include<math.h>

#define Z 5
#define Y 10
#define X 39

#define BIND(A,L,H) ((L)<(A)?(A)<(H)?(A):(H):(L))

void p_char(void*pv) {
  char s[3];
  int i = 0;
  s[i++] = ' ', s[i++] = *(char*)pv, s[i++] = 0;
  fputs(s, stdout);
}

void display(void*a,size_t rank,size_t*shape,void(*f)(void*)) {
  int i;
  if (0 == rank)
    (*f)(a);
  else if (1 == rank) {
    for (i = 0; i < *shape; ++i)
      (*f)(a+i);
    putchar('\n');
  } else {
    for (i = 0; i < *shape; ++i)
      display(((void**)a)[i], rank-1, shape+1, f);
    putchar('\n');
  }
}

int main() {			/* character cell 3D graphics.  Whoot */
  char***array;
  float x,y,z;
  size_t rank, shape[3], i, j, k;
  rank = 0;
  shape[rank++] = Z, shape[rank++] = Y, shape[rank++] = X;
  array = allocarray(rank, shape, sizeof(char));
  memset(**array, ' ', X*Y*Z*(sizeof(***array))); /* load the array with spaces */
  for (i = 0; i < X; ++i) {
    x = i/(float)X;
    for (j = 0; j < Y; ++j) {
      y = j/(float)X;
      z = x*y*(4*M_PI);
      z = 5.2*(0.5+(0.276765 - sin(z)*cos(z)*exp(1-z))/0.844087); /* a somewhat carefully designed silly function */
      /* printf("%g %g %g\n", x, y, z); */
      k = (int)z;
      array[BIND(k, 0, Z-1)][j][i] = '@'; /* BIND ensures a valid index  */
    }
  }
  display(array, rank, shape, p_char);
  puts("\nIt is what it is.");
  free(array);
  return EXIT_SUCCESS;
}
#endif


This style is supported by all 'C' compilers.

#include <stdio.h>
#include <stdlib.h>
int main(int argc, char **argv)
{
   int user1 = 0, user2 = 0;
   int *a1, **array, row;

   printf("Enter two integers.  Space delimited, please:  ");
   scanf("%d %d",&user1, &user2);

   a1 = malloc(user1*user2*sizeof(int));
   array = malloc(user1*sizeof(int*));
   for (row=0; row<user1; row++) array[row]=a1+row*user2;

   array[user1/2][user2/2] = user1 + user2;
   printf("array[%d][%d] is %d\n",user1/2,user2/2,array[user1/2][user2/2]);
   free(array);
   free(a1);
   return 0;
}

This style also supports more efficient memory utilization if you're only using a portion of the array. If you only need the upper right half of a square array, you can do something like the following.

#include <stdio.h>
#include <stdlib.h>
int main(int argc, char **argv)
{
   int user1 = 0;
   int space_needed;
   int *a1, **array;
   int row, col, offset;

   printf("Enter size of array:  ");
   scanf("%d",&user1);

   space_needed = (user1+1)*user1/2;
   a1 = malloc(space_needed * sizeof(*a1));
   array = malloc(user1 * sizeof(*array));
   for (row=0,offset=0; row<user1; offset+=(user1-row), row++) {
      array[row]=a1+offset-row;
      for (col=row; col<user1; col++)
          array[row][col] = 1+col-row;
   }
   for (row=0; row<user1; row++) 
      printf("%d ", array[row][user1-1]);
   printf("\n");

   free(array);
   free(a1);
   return 0;
}

This approach most closely matches the C99 example, as alloca allocates on the stack, rather than the heap, as malloc does.

#include <stdio.h>
#include <alloca.h>
int main(int argc, char **argv)
{
   int user1 = 0, user2 = 0;
   int *a1, **array, row;

   printf("Enter two integers.  Space delimited, please:  ");
   scanf("%d %d",&user1, &user2);

   a1 = alloca(user1*user2*sizeof(int));
   array = alloca(user1*sizeof(int*));
   for (row=0; row<user1; row++) array[row]=a1+row*user2;

   array[user1/2][user2/2] = user1 + user2;
   printf("array[%d][%d] is %d\n",user1/2,user2/2,array[user1/2][user2/2]);
   return 0;
}

C#

class Program
    {
        static void Main(string[] args)
        {
            Console.WriteLine("Enter two integers. Space delimited please: ");
            string s = Console.ReadLine();
            
            int[,] myArray=new int[(int)s[0],(int)s[2]];
            myArray[0, 0] = 2;
            Console.WriteLine(myArray[0, 0]);

            Console.ReadLine();
        }
    }

C++

With language built-in facilities

#include <iostream>

int main()
{
  // read values
  int dim1, dim2;
  std::cin >> dim1 >> dim2;

  // create array
  double* array_data = new double[dim1*dim2];
  double** array = new double*[dim1];
  for (int i = 0; i < dim1; ++i)
    array[i] = array_data + dim2*i;

  // write element
  array[0][0] = 3.5;

  // output element
  std::cout << array[0][0] << std::endl;

  // get rid of array
  delete[] array;
  delete[] array_data;

  return 0;
}

Using std::vector from the standard library

#include <iostream>
#include <vector>

int main()
{
  // read values
  int dim1, dim2;
  std::cin >> dim1 >> dim2;

  // create array
  std::vector<std::vector<double> > array(dim1, std::vector<double>(dim2));

  // write element
  array[0][0] = 3.5;

  // output element
  std::cout << array[0][0] << std::endl;

  // the array is automatically freed at the end of main()
  return 0;
}

Using boost::multi_array

Library: Boost
#include <iostream>
#include <boost/multi_array.hpp>

typedef boost::multi_array<double, 2> two_d_array_type;

int main()
{
    // read values
    int dim1, dim2;
    std::cin >> dim1 >> dim2;

    // create array
    two_d_array_type A(boost::extents[dim1][dim2]);

    // write element
    A[0][0] = 3.1415;

    // read element
    std::cout << A[0][0] << std::endl;

    return 0;
}

Using boost::uBLAS

Library: Boost version from 1.29
Works with: Boost version 1.54
#include <cstdlib>
#include <boost/numeric/ublas/matrix.hpp>
#include <boost/numeric/ublas/io.hpp>

int main (const int argc, const char** argv) {
    if (argc > 2) {
        using namespace boost::numeric::ublas;

        matrix<double> m(atoi(argv[1]), atoi(argv[2])); // build
        for (unsigned i = 0; i < m.size1(); i++)
            for (unsigned j = 0; j < m.size2(); j++)
                m(i, j) = 1.0 + i + j; // fill
        std::cout << m << std::endl; // print
        return EXIT_SUCCESS;
    }

    return EXIT_FAILURE;
}

Clean

import StdEnv

Start :: *World -> { {Real} }
Start world
    # (console, world) = stdio world
      (_, dim1, console) = freadi console
      (_, dim2, console) = freadi console
    = createArray dim1 (createArray dim2 1.0)

Clojure

(let [rows (Integer/parseInt (read-line))
      cols (Integer/parseInt (read-line))
      a (to-array-2d (repeat rows (repeat cols nil)))]
  (aset a 0 0 12)
  (println "Element at 0,0:" (aget a 0 0)))

CLU

prompt = proc (s: string) returns (int)
    stream$puts(stream$primary_output(), s)
    return(int$parse(stream$getl(stream$primary_input())))
end prompt

start_up = proc ()
    po: stream := stream$primary_output()

    % Ask for width and height
    width: int := prompt("Width? ")
    height: int := prompt("Height? ")   

    % Create an array of arrays.
    % In order to actually create separate arrays, rather than repeating
    % a reference to the same array over and over, fill_copy must be used.
    arr: array[array[int]] :=
        array[array[int]]$fill_copy(1, width, array[int]$fill(1, height, 0))
    
    % Set a value
    x: int := 1+width/2
    y: int := 1+height/2
    arr[x][y] := 123
    
    % Retrieve the value
    stream$putl(po, "arr[" || int$unparse(x) || "][" || int$unparse(y)
                 || "] = " || int$unparse(arr[x][y]))

    % The array will be automatically garbage-collected once there
    % are no more references to it.
end start_up
Output:
Width? 8
Height? 6
arr[5][4] = 123

Common Lisp

(let ((d1 (read))
      (d2 (read)))
  (assert (and (typep d1 '(integer 1)) 
               (typep d2 '(integer 1))) 
          (d1 d2))
  (let ((array (make-array (list d1 d2) :initial-element nil))
        (p1 0)
        (p2 (floor d2 2)))
    (setf (aref array p1 p2) t)
    (print (aref array p1 p2))))

The assert will allow the user to reenter the dimensions if they are not positive integers.

Component Pascal

Arrays in Component Pascal are started from zero index. No DISPOSE-like procedures because of garbage collection.

MODULE TestArray;
(* Implemented in BlackBox Component Builder *)

	IMPORT Out;

	(* Open array *)
	
	PROCEDURE DoTwoDim*;
		VAR d: POINTER TO ARRAY OF ARRAY OF INTEGER;
	BEGIN
		NEW(d, 5, 4); (* allocating array in memory *)
		d[1, 2] := 100; (* second row, third column element *)
		d[4, 3] := -100; (* fifth row, fourth column element *)
		Out.Int(d[1, 2], 0); Out.Ln;
		Out.Int(d[4, 3], 0); Out.Ln;
	END DoTwoDim;

END TestArray.

Crystal

require "random"

first = gets.not_nil!.to_i32
second = gets.not_nil!.to_i32

arr = Array(Array(Int32)).new(first, Array(Int32).new second, 0)

random = Random.new

first = random.rand 0..(first - 1)
second = random.rand 0..(second - 1)

arr[first][second] = random.next_int
puts arr[first][second]

D

void main() {
    import std.stdio, std.conv, std.string;
    int nRow, nCol;

    write("Give me the numer of rows: ");
    try {
        nRow = readln.strip.to!int;
    } catch (StdioException) {
        nRow = 3;
        writeln;
    }

    write("Give me the numer of columns: ");
    try {
        nCol = readln.strip.to!int;
    } catch (StdioException) {
        nCol = 5;
        writeln;
    }

    auto array = new float[][](nRow, nCol);
    array[0][0] = 3.5;
    writeln("The number at place [0, 0] is ", array[0][0]);
}
Output:
Give me the numer of rows: 
Give me the numer of columns: 
The number at place [0, 0] is 3.5

Delphi

Dimensions are generated randomly, not input by user.

program Project1;

{$APPTYPE CONSOLE}

uses
  SysUtils;
var
  matrix:array of array of Byte;
  i,j:Integer;
begin
  Randomize;
  //Finalization is not required in this case, but you have to do
  //so when reusing the variable in scope
  Finalize(matrix);
  //Init first dimension with random size from 1..10
  //Remember dynamic arrays are indexed from 0
  SetLength(matrix,Random(10) + 1);
  //Init 2nd dimension with random sizes too
  for i := Low(matrix) to High(matrix) do
    SetLength(matrix[i],Random(10) + 1);

  //End of code, the following part is just output
  Writeln(Format('Total amount of columns = %.2d',[Length(matrix)]));
  for i := Low(matrix) to High(matrix) do
    Writeln(Format('Column %.2d = %.2d rows',[i,Length(matrix[i])]));

  Readln;
end.

Test run:

Total amount of columns = 10
Column 00 = 04 rows
Column 01 = 08 rows
Column 02 = 09 rows
Column 03 = 05 rows
Column 04 = 01 rows
Column 05 = 04 rows
Column 06 = 07 rows
Column 07 = 04 rows
Column 08 = 10 rows
Column 09 = 02 rows

EasyLang

write "Number of rows: "
nrows = number input
print nrows
write "Number of columns: "
ncols = number input
print ncols
# 
len a[][] nrows
for i to nrows
   len a[i][] ncols
.
a[1][1] = 11
print a[1][1]
len a[][] 0

Elena

ELENA 6.x :

Typified array

import extensions;
 
public program()
{
    var n := new Integer();
    var m := new Integer();
 
    console.write("Enter two space delimited integers:");
    console.loadLine(n,m);
 
    var myArray := class Matrix<int>.allocate(n,m);
 
    myArray.setAt(0,0,2);
 
    console.printLine(myArray.at(0, 0))
}

Jagged array

import system'routines;
import extensions;
 
public program()
{
    auto n := new Integer();
    auto m := new Integer();
 
    console.write("Enter two space delimited integers:");
    console.loadLine(n,m);
 
    auto myArray2 := new object[][](n.Value).populate::(int i => (new object[](m.Value)) );
    myArray2[0][0] := 2;
    myArray2[1][0] := "Hello";
 
    console.printLine(myArray2[0][0]);                
    console.printLine(myArray2[1][0]);                
}

Elixir

defmodule TwoDimArray do

  def create(w, h) do
    List.duplicate(0, w)
      |> List.duplicate(h)
  end
  
  def set(arr, x, y, value) do
    List.replace_at(arr, x, 
      List.replace_at(Enum.at(arr, x), y, value)
    )
  end
  
  def get(arr, x, y) do
    arr |> Enum.at(x) |> Enum.at(y)
  end
end


width = IO.gets "Enter Array Width: "
w = width |> String.trim() |> String.to_integer()

height = IO.gets "Enter Array Height: "
h = height |> String.trim() |> String.to_integer()

arr = TwoDimArray.create(w, h) 
arr = TwoDimArray.set(arr,2,0,42)

IO.puts(TwoDimArray.get(arr,2,0))

Erlang

-module( two_dimensional_array ).

-export( [create/2, get/3, set/4, task/0] ).

create( X, Y ) -> array:new( [{size, X}, {default, array:new( [{size, Y}] )}] ).

get( X, Y, Array ) -> array:get( Y, array:get(X, Array) ).

set( X, Y, Value, Array ) ->
	Y_array = array:get( X, Array ),
	New_y_array = array:set( Y, Value, Y_array ),
	array:set( X, New_y_array, Array ).

task() ->
	{ok, [X, Y]} = io:fread( "Input two integers.  Space delimited, please:  ", "~d ~d" ),
	Array = create( X, Y ),
	New_array = set( X - 1, Y - 1, X * Y, Array ),
	io:fwrite( "In position ~p ~p we have ~p~n", [X - 1, Y - 1, get( X - 1, Y - 1, New_array)] ).
Output:
7> two_dimensional_array:task().
Input two integers.  Space delimited, please:  4 5
In position 3 4 we have 20

ERRE

In ERRE language arrays created at run-time is "dynamic arrays". For this task will be enough this code:

PROGRAM DYNAMIC

!$DYNAMIC
DIM A%[0,0]

BEGIN
  PRINT(CHR$(12);) !CLS
  INPUT("Subscripts",R%,C%)
  !$DIM A%[R%,C%]
  A%[2,3]=6
  PRINT("Value in row";2;"and col";3;"is";A%[2,3])
END PROGRAM

You can redimension A% using pragmas: !$ERASE A% with a subsequent !$DIM A%[.,.]

Euphoria

include get.e

sequence array
integer height,width,i,j

height = floor(prompt_number("Enter height: ",{}))
width = floor(prompt_number("Enter width: ",{}))

array = repeat(repeat(0,width),height)

i = floor(height/2+0.5)
j = floor(width/2+0.5)
array[i][j] = height + width

printf(1,"array[%d][%d] is %d\n", {i,j,array[i][j]})

F#

open System

let width = int( Console.ReadLine() )
let height = int( Console.ReadLine() )
let arr = Array2D.create width height 0
arr.[0,0] <- 42
printfn "%d" arr.[0,0]

Factor

Factor doesn't provide any support for easy access of 2d arrays. But since factor's written in factor, we can just add it and it's just as good :)

USING: io kernel math.matrices math.parser prettyprint
sequences ;
IN: rosettacode.runtime2darray

: set-Mi,j ( elt {i,j} matrix -- )
[ first2 swap ] dip nth set-nth ;
: Mi,j ( {i,j} matrix -- elt ) 
[ first2 swap ] dip nth nth ;

: example ( -- ) 
readln readln [ string>number ] bi@ zero-matrix ! create the array
[ [ 42 { 0 0 } ] dip set-Mi,j ] ! set the { 0 0 } element to 42
[ [ { 0 0 } ] dip Mi,j . ] ! read the { 0 0 } element
bi ;

Fermat

?m;                    {imput the dimensions of the array}
?n;
Array a[m,n];          {generate an array of m rows and n columns}
a[m\2, n\2] := m+n-1;  {put some value in one of the cells}
!!a[m\2, n\2];         {display that entry}
@[a];                  {delete the array}

Forth

: cell-matrix
  create ( width height "name" ) over ,  * cells allot
  does> ( x y -- addr ) dup cell+ >r  @ * + cells r> + ;

5 5 cell-matrix test

36 0 0 test !
0 0 test @ .  \ 36
INTEGER DMATRIX my-matrix{{
& my-matrix{{ 8 9 }}malloc

8 my-matrix{{ 3 4 }} !
my-matrix{{ 3 4 }} @ .

& my-matrix{{ }}free

Fortran

In Fortran 90 and later

PROGRAM Example

  IMPLICIT NONE
  INTEGER :: rows, columns, errcheck
  INTEGER, ALLOCATABLE :: array(:,:)

  WRITE(*,*) "Enter number of rows"
  READ(*,*) rows
  WRITE(*,*) "Enter number of columns"
  READ(*,*) columns
 
  ALLOCATE (array(rows,columns), STAT=errcheck) ! STAT is optional and is used for error checking
 
  array(1,1) = 42
 
  WRITE(*,*) array(1,1)
 
  DEALLOCATE (array, STAT=errcheck)

END PROGRAM Example

Fōrmulæ

Fōrmulæ programs are not textual, visualization/edition of programs is done showing/manipulating structures but not text. Moreover, there can be multiple visual representations of the same program. Even though it is possible to have textual representation —i.e. XML, JSON— they are intended for storage and transfer purposes more than visualization and edition.

Programs in Fōrmulæ are created/edited online in its website.

In this page you can see and run the program(s) related to this task and their results. You can also change either the programs or the parameters they are called with, for experimentation, but remember that these programs were created with the main purpose of showing a clear solution of the task, and they generally lack any kind of validation.

Solution

There is no need to "release" the array, once the result is delivered, all intermediate elements are destroyed.

Frink

[rows, cols] = dims = eval[input["Enter dimensions: ", ["Rows", "Columns"]]]
a = new array[dims, 0]    // Create and initialize to 0
a@(rows-1)@(cols-1) = 10
println[a@(rows-1)@(cols-1)]


FutureBasic

window 1

CFStringRef iStr, jStr
long i, j

iStr = input @"Enter one positive integer: "
jStr = input @"Enter other positive integer: "
i = intval(iStr)
j = intval(jStr)
mda (0, 0) = {i, j}
mda (i, j) = i * j
printf @"mda(%ld, %ld) = %ld", i, j, mda_integer(i, j)
mda_kill

HandleEvents
Output:

With inputs of 5 and 7:

mda(5, 7) = 35

GAP

# Creating an array of 0
a := NullMat(2, 2); 
# [ [ 0, 0 ], [ 0, 0 ] ]

# Some assignments
a[1][1] := 4;
a[1][2] := 5;
a[2][1] := 3;
a[2][2] := 4;

a
# [ [ 4, 5 ], [ 3, 4 ] ]

Determinant(a);
# 1

Go

Arrays in Go are only one dimensional. Code below show the obvious way of composing a 2d array as an array of arrays that can be indexed as a[r][c].

package main

import "fmt"

func main() {
    var row, col int
    fmt.Print("enter rows cols: ")
    fmt.Scan(&row, &col)

    // allocate composed 2d array
    a := make([][]int, row)
    for i := range a {
        a[i] = make([]int, col)
    }

    // array elements initialized to 0
    fmt.Println("a[0][0] =", a[0][0])

    // assign
    a[row-1][col-1] = 7

    // retrieve
    fmt.Printf("a[%d][%d] = %d\n", row-1, col-1, a[row-1][col-1])

    // remove only reference
    a = nil
    // memory allocated earlier with make can now be garbage collected.
}

The technique above alocates each row separately. This might be good if you need extremely large arrays that cannot be allocated in a single piece. It might be bad though, for locality, as there would be no guarantee that the separate allocations would be localized in memory. A technique that maintains locality is this,

    // allocate composed 2d array
    a := make([][]int, row)
    e := make([]int, row * col)
    for i := range a {
        a[i] = e[i*col:(i+1)*col]
    }

Now all rows are allocated with a single allocation. Alternatively, slice e can be used directly without going through slice a. Element r c can be accessed simply as e[r*cols+c] for example, or accessor functions can be defined such as,

func get(r, c int) int {
    return e[r*cols+c]
}

Groovy

Solution:

def make2d = { nrows, ncols ->
    (0..<nrows).collect { [0]*ncols }
}

Test:

def r = new Random()

System.in.splitEachLine(/,\s*/) { dim ->
    def nrows = dim[0] as int
    def ncols = dim[1] as int
    
    def a2d = make2d(nrows, ncols)
    
    def row = r.nextInt(nrows)
    def col = r.nextInt(ncols)
    def val = r.nextInt(nrows*ncols)
    
    a2d[row][col] = val
    
    println "a2d[${row}][${col}] == ${a2d[row][col]}"
    
    a2d.each { println it }
    println()
}

Input:

  3,   5
4, 4

Output:

a2d[0][3] == 8
[0, 0, 0, 8, 0]
[0, 0, 0, 0, 0]
[0, 0, 0, 0, 0]

a2d[2][2] == 5
[0, 0, 0, 0]
[0, 0, 0, 0]
[0, 0, 5, 0]
[0, 0, 0, 0]

Haskell

import Data.Array

doit n m = a!(0,0) where a = array ((0,0),(n,m)) [((0,0),42)]

HicEst

REAL :: array(1)

DLG(NameEdit=rows, NameEdit=cols, Button='OK', TItle='Enter array dimensions')

ALLOCATE(array, cols, rows)
array(1,1) = 1.234
WRITE(Messagebox, Name) array(1,1)

Icon and Unicon

All Icon and Unicon data objects are automatically reclaimed. Multiply dimensioned arrays are arrays of arrays in both languages.

procedure main(args)
    nr := integer(args[1]) | 3  # Default to 3x3
    nc := integer(args[2]) | 3

    A := list(nr)
    every !A := list(nc)

    x := ?nr    # Select a random element
    y := ?nc

    A[x][y] := &pi
    write("A[",x,"][",y,"] -> ",A[x][y])
end

Sample output:

->ar 65 2
A[37][1] -> 3.141592654

IDL

The following is only for demonstration. No real program should just assume that the user input is valid, integer, large enough etc.

read, x, prompt='Enter x size:'
read, y, prompt='Enter y size:'
d = fltarr(x,y) 

d[3,4] = 5.6
print,d[3,4]
;==> outputs  5.6

delvar, d

J

The natural ways of creating a two dimensional array, from array dimensions, in J are i. and $

   array1=:i. 3 4   NB. a 3 by 4 array with arbitrary values
   array2=: 5 6 $ 2 NB. a 5 by 6 array where every value is the number 2

To update the upper left corner of the array with the value 99, you might use }

   array1=: 99 (<0 0)} array1

And, to retrieve that value you might use {

   (<0 0) { array1

Finally, J manages storage for you, so to delete the array, you could either have the name refer to a new value

   array1=: 0

or you could remove the name itself:

   erase'array1'

Putting these ideas together and adding a few frills:

task=: verb define
  assert. y -: 0 0 + , y       NB. error except when 2 dimensions are specified
  INIT=. 0                     NB. array will be populated with this value
  NEW=. 1                      NB. we will later update one location with this value
  ARRAY=. y $ INIT             NB. here, we create our 2-dimensional array
  INDEX=. < ? $ ARRAY          NB. pick an arbitrary location within our array
  ARRAY=. NEW INDEX} ARRAY     NB. use our new value at that location
  INDEX { ARRAY                NB. and return the value from that location
)

Passing two integers to task (as a list) satisfies the specifications for a two-dimensional array, but providing a longer list of integers accomplishes the same task on an array of as many dimensions as the count of integers given.

Example use (result should always be 1 which is the value of NEW):

   task 99 99
1

The type of the array is determined by the type of the values used in filling the array. E.g., alternate data types are obtained by substituting any of the following lines:

'init new' =. ' ';'x'           NB. literals
'init new' =. 1r2;2r3           NB. fractions
'init new' =. a: ; <<'Rosetta'  NB. boxes

Java

import java.util.Scanner;

public class twoDimArray {
  public static void main(String[] args) {
        Scanner in = new Scanner(System.in);
        
        int nbr1 = in.nextInt();
        int nbr2 = in.nextInt();
        
        double[][] array = new double[nbr1][nbr2];
        array[0][0] = 42.0;
        System.out.println("The number at place [0 0] is " + array[0][0]);
  }
}

JavaScript

var width = Number(prompt("Enter width: "));
var height = Number(prompt("Enter height: "));

//make 2D array
var arr = new Array(height);

for (var i = 0; i < h; i++) {
  arr[i] = new Array(width);
}

//set value of element
a[0][0] = 'foo';
//print value of element
console.log('arr[0][0] = ' + arr[0][0]);

//cleanup array
arr = void(0);

jq

jq data types are exactly those of JSON, so there are various alternatives for representing matrices.

One way to represent an m by n matrix is as an array of m arrays, one of which is of length n, and all of which have length less than or equal to n.

If M is such as array, then the syntax M[i][j] can be used to access the (i,j) element in the conventional sense, except that the index origin in jq is 0.

Note that the expression M | getpath([i,j]) would also access M[i][j].

To set the M[i][j] element to, say, e, one can use the idiom:

   M | setpath([i,j]; e)

Here's a simple example.

# A function to create an m x n matrix 
# filled with the input element
def matrix(m;n):
  . as $init
  | ( [ range(0; n + 1) ] | map($init)) as $row
  | ( [ range(0; m + 1) ] | map($row))
 ;

# Task: create a matrix with dimensions specified by the user 
# and set the [1,2] element:
(0 | matrix($m|tonumber; $n|tonumber)) | setpath([1,2]; 99)

If the above is in a file, say 2d.jq, the invocation:

jq -n -c --arg m 2 --arg n 3 -f 2d.jq

would produce:

[[0,0,0,0],[0,0,99,0],[0,0,0,0]]

Julia

Julia supports n-dimensional arrays as native data types: `Array{T, N}`, where `T` is the type of it´s elements and `N` is the number of dimensions.

function input(prompt::AbstractString)
    print(prompt)
    return readline()
end

n = input("Upper bound for dimension 1: ") |>
    x -> parse(Int, x)
m = input("Upper bound for dimension 2: ") |>
    x -> parse(Int, x)

x = rand(n, m)
display(x)
x[3, 3]         # overloads `getindex` generic function
x[3, 3] = 5.0   # overloads `setindex!` generic function
x::Matrix # `Matrix{T}` is an alias for `Array{T, 2}`
x = 0; gc() # Julia has no `del` command, rebind `x` and call the garbage collector

Manually calling the garbage collector may or may not actually collect the array, but it will be eventually.

Kotlin

Program arguments provide dimensions of the array (4 5 in the example).

fun main(args: Array<String>) {
    // build
    val dim = arrayOf(10, 15)
    val array = Array(dim[0], { IntArray(dim[1]) } )

    // fill
    array.forEachIndexed { i, it ->
        it.indices.forEach { j ->
            it[j] = 1 + i + j
        }
    }

    // print
    array.forEach { println(it.asList()) }
}
Output:
[1, 2, 3, 4, 5]
[2, 3, 4, 5, 6]
[3, 4, 5, 6, 7]
[4, 5, 6, 7, 8]

Works with: UCB Logo
make "a2 mdarray [5 5]
mdsetitem [1 1] :a2 0     ; by default, arrays are indexed starting at 1
print mditem [1 1] :a2    ; 0

Lua

function multiply(n, a, b) if a <= b then return n, multiply(n, a + 1, b) end end

a, b = io.read() + 0, io.read() + 0
matrix = {multiply({multiply(1, 1, b)}, 1, a)}
matrix[a][b] = 5
print(matrix[a][b])
print(matrix[1][1])

M2000 Interpreter

Module CheckArray {
      Do {
            Input "A, B=", A% ,B%
      } Until A%>0 and B%>0
      
      \\ 1@ is 1 Decimal
      addone=lambda N=1@ ->{=N : N++}
      Dim Base 1, Arr(A%,B%)<<addone()
      \\ pi also is decimal
      Arr(1,1)=pi
      Print Arr(1,1)
      Print Arr()
      \\ all variables/arrays/inner functions/modules erased now
}
CheckArray

Maple

This hardly covers the richness and complexity of arrays in Maple, but here goes:

> a := Array( 1 .. 3, 1 .. 4 ): # initialised to 0s
> a[1,1] := 1: # assign an element
> a[2,3] := 4: # assign an element
> a; # display the array
                           [1    0    0    0]
                           [                ]
                           [0    0    4    0]
                           [                ]
                           [0    0    0    0]

> a := 'a': # unassign the name
> gc(); # force a garbage collection; may or may not actually collect the array, but it will be eventually

Mathematica /Wolfram Language

arrayFun[m_Integer,n_Integer]:=Module[{array=ConstantArray[0,{m,n}]},
   array[[1,1]]=RandomReal[];
   array[[1,1]]
]

MATLAB / Octave

width = input('Array Width: ');
height = input('Array Height: ');

array  = zeros(width,height);

array(1,1) = 12;

disp(['Array element (1,1) = ' num2str(array(1,1))]);

clear array;  % de-allocate (remove) array from workspace


Sample Output:

Array Width: 18
Array Height: 12
Array element (1,1) = 12

Maxima

printf(true, "in the following terminate every number with semicolon `;'")$
n: readonly("Input x-size: ")$
m: readonly("Input y-size: ")$
a: make_array(fixnum, n, m)$
fillarray(a, makelist(i, i, 1, m*n))$

/* indexing starts from 0 */
print(a[0,0]);
print(a[n-1,m-1]);

MAXScript

a = getKBValue prompt:"Enter first dimension:"
b = getKBValue prompt:"Enter second dimension:"
arr1 = #()
arr2 = #()
arr2[b] = undefined
for i in 1 to a do
(
     append arr1 (deepCopy arr2)
)
arr1[a][b] = 1
print arr1[a][b]

MUMPS

This example uses a two level tree to mimic an 2D array.

ARA2D
 NEW X,Y,A,I,J
REARA
 WRITE !,"Please enter two positive integers"
 READ:10 !,"First: ",X
 READ:10 !,"Second: ",Y
 GOTO:(X\1'=X)!(X<0)!(Y\1'=Y)!(Y<0) REARA
 FOR I=1:1:X FOR J=1:1:Y SET A(I,J)=I+J
 WRITE !,"The corner of X and Y is ",A(X,Y)
 KILL X,Y,A,I,J
 QUIT

NetRexx

Note: No attempt is made to validate the input. Any errors will be handled as exceptions by the underlying JVM.

/* NetRexx */
options replace format comments java crossref symbols nobinary

say "give me the X and Y dimensions as two positive integers:"
parse ask xDim yDim
xPos = xDim % 2 -- integer divide to get close to the middle of the array
yPos = yDim % 2

arry = Rexx[xDim, yDim]
arry[xPos, yPos] = xDim / yDim -- make up a value...
say "arry["xPos","yPos"]:" arry[xPos, yPos]
return

Output:

give me the X and Y dimensions as two positive integers:
1250 1777
arry[625,888]: 0.703432752

Nim

import strutils, rdstdin
 
let
  w = readLineFromStdin("Width: ").parseInt()
  h = readLineFromStdin("Height: ").parseInt()

# Create the rows.
var s = newSeq[seq[int]](h)
 
# Create the columns.
for i in 0 ..< h:
  s[i].newSeq(w)

# Store a value in an element.
s[0][0] = 5

# Retrieve and print it.
echo s[0][0]

# The allocated memory is freed by the garbage collector.

Objeck

class TwoDimArray  {
  function : Main(args : String[]) ~ Nil {
    rows := Standard->ReadLine()->ToInt();
    cols := Standard->ReadLine()->ToInt();
    
    if(rows > 0 & cols > 0) {
      array := Float->New[rows, cols];
      array[0,0] := 42.0;
      Standard->Print("The number at place [0,] is: ")->PrintLine(array[0,0]);
    }
  }
}

Objective-C

Being Objective-C derivated from C, the C solution works fine in Objective-C too.

The "OpenStep" frameworks (GNUstep, Cocoa) does not provide a class for multidimensional array; of course it can be implemented in several way (also as a wrapper for the plain C way of handling arrays). Here I show a straightforward use of the NSMutableArray class.

Works with: GNUstep
Works with: Cocoa
#import <Foundation/Foundation.h>

int main()
{
  @autoreleasepool {
    int num1, num2;
    scanf("%d %d", &num1, &num2);

    NSLog(@"%d %d", num1, num2);
  
    NSMutableArray *arr = [NSMutableArray arrayWithCapacity: (num1*num2)];
    // initialize it with 0s
    for(int i=0; i < (num1*num2); i++) [arr addObject: @0];

    // replace 0s with something more interesting
    for(int i=0; i < num1; i++) {
      for(int j=0; j < num2; j++) {
        arr[i*num2+j] = @(i*j);
      }
    }

    // access a value: i*num2+j, where i,j are the indexes for the bidimensional array
    NSLog(@"%@", arr[1*num2+3]);
  }
  return 0;
}

OCaml

let nbr1 = read_int ();;
let nbr2 = read_int ();;
let array = Array.make_matrix nbr1 nbr2 0.0;;
array.(0).(0) <- 3.5;;
print_float array.(0).(0); print_newline ();;

or using the module Bigarray:

let nbr1 = read_int ();;
let nbr2 = read_int ();;
let arr = Bigarray.Array2.create Bigarray.float32 Bigarray.c_layout nbr1 nbr2 ;;
arr.{0,0} <- 3.5;;
print_float arr.{0,0}; print_newline ();;

ooRexx

ooRexx arrays can be created with up to 999,999,999 dimensions...assuming you have enough memory to do so. Actually it's the 'size' of the array that's limited (the product of the dimensions).

Say "enter first dimension"
pull d1
say "enter the second dimension"
pull d2
a = .array~new(d1, d2)
a[1, 1] = "Abc"
say a[1, 1]
say d1 d2 a[d1,d2] 
say a[10,10]
max=1000000000
b = .array~new(max,max)
Output:
D:\>rexx 2d
enter first dimension
3
enter the second dimension
5
Abc
3 5 The NIL object
The NIL object
       *-* Compiled method NEW with scope "Array"
    11 *-* b = .array~new(max,max)
Error 93 running D:\2d.rex line 11:  Incorrect call to method
Error 93.959:  An array cannot contain more than 99,999,999 elements

Oz

Oz does not have multi-dimensional arrays. But we can create an array of arrays (similarly to most examples on this page):

declare
  %% Read width and height from stdin
  class TextFile from Open.file Open.text end
  StdIn = {New TextFile init(name:stdin)}
  Width = {String.toInt {StdIn getS($)}}
  Height = {String.toInt {StdIn getS($)}}
  %% create array
  Arr = {Array.new 1 Width unit}
in
  for X in 1..Width do
     Arr.X := {Array.new 1 Height 0}
  end
  %% set and read element
  Arr.1.1 := 42
  {Show Arr.1.1}

PARI/GP

tmp(m,n)={
  my(M=matrix(m,n,i,j,0));
  M[1,1]=1;
  M[1,1]
};

Pascal

Works with: GNU Pascal version 20060325, based on gcc-3.4.4

The following code is standard Extended Pascal (tested with gpc --extended-pascal):

program array2d(input, output);

type
 tArray2d(dim1, dim2: integer) = array[1 .. dim1, 1 .. dim2] of real;
 pArray2D = ^tArray2D;

var
 d1, d2: integer;
 data: pArray2D;

begin
 { read values }
 readln(d1, d2);

 { create array }
 new(data, d1, d2);

 { write element }
 data^[1,1] := 3.5;

 { output element }
 writeln(data^[1,1]);

 { get rid of array }
 dispose(data);
end.

PascalABC.NET

begin
  var (m,n) := ReadInteger2;
  var a: array[,] of integer := new integer[m,n];
  a[0,0] := 1; a[m-1,n-1] := 55;
  a.Println;
  var a1 := MatrRandomInteger(m,n);
  a1.Println;
end.
Output:
3 4
   1   0   0   0
   0   0   0   0
   0   0   0  55
  76  53  12  48
  79  22  15  43
  40  97  26  64

Perl

Works with: Perl version 5.x

Predefining an array (or multi-dimension array) size is unnecessary, Perl dynamically resizes the array to meet the requirements. Of course I'm assuming that the user is entering array size 0 based.

sub make_array($ $){
  # get array sizes from provided params, but force numeric value
  my $x = ($_[0] =~ /^\d+$/) ? shift : 0;
  my $y = ($_[0] =~ /^\d+$/) ? shift : 0;
  
  # define array, then add multi-dimensional elements
  my @array;
  $array[0][0] = 'X '; # first by first element
  $array[5][7] = 'X ' if (5 <= $y and 7 <= $x); # sixth by eighth element, if the max size is big enough
  $array[12][15] = 'X ' if (12 <= $y and 15 <= $x); # thirteenth by sixteenth element, if the max size is big enough
  
  # loop through the elements expected to exist base on input, and display the elements contents in a grid
  foreach my $dy (0 .. $y){
    foreach my $dx (0 .. $x){
      (defined $array[$dy][$dx]) ? (print $array[$dy][$dx]) : (print '. ');
    }
    print "\n";
  }
}

The above is a bit verbose, here is a simpler implementation:

sub array {
    my ($x, $y) = @_;
    map {[ (0) x $x ]} 1 .. $y
}

my @square = array 3, 3;

# everything above this line is mostly redundant in perl,
# since perl would have created the array automatically when used.
# however, the above function initializes the array elements to 0,
# while perl would have used undef
#
#  $cube[3][4][5] = 60  # this is valid even if @cube was previously undefined

$square[1][1] = 1;
print "@$_\n" for @square;
> 0 0 0
> 0 1 0
> 0 0 0

Phix

Obviously the sigificant part here is the three lines beginning "sequence array", the rest is all just boilerplate gui code.

-- demo\rosetta\Create2Darray.exw
with javascript_semantics -- (layout/spacing leaves a little to be desired...)
include pGUI.e
Ihandle lab, tab, res, dlg

function valuechanged_cb(Ihandle tab)
    string s = IupGetAttribute(tab,"VALUE")
    sequence r = scanf(s,"%d %d")
    if length(r)=1 then
        integer {height,width} = r[1],
                i = floor(height/2+0.5),
                j = floor(width/2+0.5)
        if i>0 and j>0 then

            sequence array = repeat(repeat(0,width),height)

            array[i][j] = height + width
 
            s = sprintf("array[%d][%d] is %d\n", {i,j,array[i][j]})

            IupSetStrAttribute(res,"TITLE",s)
            IupRefresh(res)
        end if
    end if
    return IUP_DEFAULT
end function

procedure main()
    IupOpen()
    lab = IupLabel("Enter two numbers (>0) separated by a space")
    tab = IupText("VALUECHANGED_CB", Icallback("valuechanged_cb"),"EXPAND=HORIZONTAL")
    res = IupLabel("")
    dlg = IupDialog(IupVbox({IupHbox({lab,tab},"GAP=10,NORMALIZESIZE=VERTICAL"),
                             IupHbox({res})},"MARGIN=5x5"),`TITLE="Create 2D array"`)
    IupShow(dlg)
    if platform()!=JS then
        IupMainLoop()
        IupClose()
    end if
end procedure
 
main()

The distributed version contains the older and simpler but console-only code.

Phixmonti

include ..\Utilitys.pmt

"Enter height: " input tonum nl
"Enter width: " input tonum nl
0 swap repeat swap repeat       /# create two dimensional array/list. All zeroes #/
-1 get 99 -1 set -1 set         /# set the last element o last dimension #/
pstack                          /# show the content of the stack #/
-1 get -1 get "Value of the last element of the last dimension: " print print drop
drop                            /# remove array/list from the stack #/

With syntactic sugar

include ..\Utilitys.pmt

"Enter height: " input tonum nl
"Enter width: " input tonum nl
0 swap repeat swap repeat       /# create two dimensional array/list. All zeroes #/
-1 get 99 ( -1 -1 ) mset        /# set the last element o last dimension #/
pstack                          /# show the content of the stack #/
( -1 -1 ) mget "Value of the last element of the last dimension: " print print drop
drop                            /# remove array/list from the stack #/

With more syntactic sugar

include ..\Utilitys.pmt

"Enter height: " input tonum nl
"Enter width: " input tonum nl
0 swap repeat swap repeat       /# create two dimensional array/list. All zeroes #/
99 ( -1 -1 ) sset               /# set the last element o last dimension #/
pstack                          /# show the content of the stack #/
( -1 -1 ) sget "Value of the last element of the last dimension: " print print
drop                            /# remove array/list from the stack #/

Picat

import util.

go =>
  print("Input the number of rows and columns: "),
  [Rows,Cols]=split(read_line()).map(to_int),
  X=new_array(Rows,Cols),
  X[1,1] = Rows*Cols+1,
  println(X[1,1]).
Output:
Input the number of rows and columns: 10 20
201

PicoLisp

(de 2dimTest (DX DY)
   (let A (make (do DX (link (need DY))))
      (set (nth A 3 3) 999)            # Set A[3][3] to 999
      (mapc println A)                 # Print all
      (get A 3 3) ) )                  # Return A[3][3]

(2dimTest 5 5)

Output:

(NIL NIL NIL NIL NIL)
(NIL NIL NIL NIL NIL)
(NIL NIL 999 NIL NIL)
(NIL NIL NIL NIL NIL)
(NIL NIL NIL NIL NIL)
-> 999

PL/I

/* First way using a controlled variable: */

declare A(*,*) float controlled;
get list (m, n);
allocate A(m,n);
get list (A);
put skip list (A);

/* The array remains allocated until the program terminates, */
/* or until explicitly destroyed using a FREE statement.     */

free A;
 6.00000E+0000           5.00000E+0000           4.00000E+0000           3.00000E+0000           2.00000E+0000          
 1.00000E+0000
/* Second way using a BEGIN block: */

get list (m, n);
begin;
   declare A(m, n) float;
   get list (A);
   put skip list (A);
end;

/* The array is automatically destroyed when the block terminates. */
 1.00000E+0000           2.00000E+0000           3.00000E+0000           4.00000E+0000           5.00000E+0000          
 6.00000E+0000           7.00000E+0000           8.00000E+0000           9.00000E+0000           1.00000E+0001          
 1.10000E+0001           1.20000E+0002
/* Third way using a PROCEDURE block: */

get list (m, n);
call S (m, n);
S: procedure (m, n);
   declare A(m, n) float;
   get list (A);
   put skip list (A);
end S;

/* The array is automatically destroyed when the procedure terminates. */
 1.00000E+0000           2.00000E+0000           3.00000E+0000           4.00000E+0000           5.00000E+0000          
 6.00000E+0000           7.00000E+0000           8.00000E+0000           9.00000E+0000           1.00000E+0001          
 1.10000E+0001           1.20000E+0001           1.30000E+0001           1.40000E+0001           1.50000E+0001          
 1.60000E+0001           1.70000E+0001           1.80000E+0001           1.90000E+0001           2.00000E+0001

Pop11

vars itemrep;
incharitem(charin) -> itemrep;
;;; Read sizes
vars n1 = itemrep(), n2= itemrep();
;;; Create 0 based array
vars ar = newarray([0 ^(n1 - 1) 0 ^(n2 - 1)], 0);
;;; Set element value
15 -> ar(0, 0);
;;; Print element value
ar(0,0) =>
;;; Make sure array is unreferenced
0 -> ar;

Pop11 is garbage collected so there is no need to destroy array. However, the array is live as long as variable ar references it. The last assignment makes sure that we loose all our references to the array turning it into garbage.

Pop11 arrays may have arbitrary lower bounds, since we are given only size we create 0 based array.

PowerShell

function Read-ArrayIndex ([string]$Prompt = "Enter an integer greater than zero")
{
    [int]$inputAsInteger = 0

    while (-not [Int]::TryParse(([string]$inputString = Read-Host $Prompt), [ref]$inputAsInteger))
    {
        $inputString = Read-Host "Enter an integer greater than zero"
    }

    if ($inputAsInteger -gt 0) {return $inputAsInteger} else {return 1}
}

$x = $y = $null

do
{
    if ($x -eq $null) {$x = Read-ArrayIndex -Prompt "Enter two dimensional array index X"}
    if ($y -eq $null) {$y = Read-ArrayIndex -Prompt "Enter two dimensional array index Y"}
}
until (($x -ne $null) -and ($y -ne $null))

$array2d = New-Object -TypeName 'System.Object[,]' -ArgumentList $x, $y
Output:
Enter two dimensional array index X: 6
Enter two dimensional array index Y: 6

Populate the array:

[int]$k = 1

for ($i = 0; $i -lt 6; $i++)
{ 
    0..5 | ForEach-Object -Begin {$k += 10} -Process {$array2d[$i,$_] = $k + $_}
}

This is the entire array:

for ($i = 0; $i -lt 6; $i++)
{ 
    "{0}`t{1}`t{2}`t{3}`t{4}`t{5}" -f (0..5 | ForEach-Object {$array2d[$i,$_]})
}
Output:
11	12	13	14	15	16
21	22	23	24	25	26
31	32	33	34	35	36
41	42	43	44	45	46
51	52	53	54	55	56
61	62	63	64	65	66

Get an element of the array:

$array2d[2,2]
Output:
33

Prolog

Works with: SWI Prolog
:- dynamic array/2.

run :-
    write('Enter two positive integers, separated by a comma: '),
    read((I,J)),
    assert(array(I,J)),
    Value is I * J,
    format('a(~w,~w) = ~w', [I, J, Value]),
    retractall(array(_,_)).

Python

Works with: Python version 2.5 and 3.6
width = int(raw_input("Width of myarray: "))
height = int(raw_input("Height of Array: "))
myarray = [[0] * width for i in range(height)]
myarray[0][0] = 3.5
print (myarray[0][0])

Note: Some people may instinctively try to write myarray as [[0] * width] * height, but the * operator creates n references to [[0] * width]

You can also use a two element tuple to index a dictionary like so:

myarray = {(w,h): 0 for w in range(width) for h in range(height)}
# or, in pre 2.7 versions of Python: myarray = dict(((w,h), 0) for w in range(width) for h in range(height))
myarray[(0,0)] = 3.5
print (myarray[(0,0)])

Quackery

  [ witheach peek ]         is {peek}        (   { p --> x     )

  [ dip dup
      witheach [ peek dup ]
    drop ]                  is depack        (   { p --> *     )

  [ reverse
    witheach
      [ dip swap poke ] ]   is repack        (   * p --> {     )

  [ dup dip
      [ rot dip
        [ depack drop ] ]
    repack ]                is {poke}        ( x { p --> {     )

  [ 0 swap of 
    nested swap of ]        is  2array       (   n n --> [     )

  
  $ "Array width  (at least 2): " input $->n drop
  $ "Array length (at least 5): " input $->n drop
 
  say "Creating " over echo say " by " 
  dup echo say " array." cr
  
  2array
  
  say "Writing 12345 to element {1,4} of array." cr
   
  12345 swap ' [ 1 4 ] {poke}
  
  say "Reading element {1,4} of array: "
  
  ' [ 1 4 ] {peek} echo
Output:
Array width  (at least 2): 2
Array length (at least 5): 5
Creating 2 by 5 array.
Writing 12345 to element {1,4} of array.
Reading element {1,4} of array: 12345

R

Translation of: C
input <- readline("Enter two integers.  Space delimited, please:  ")
dims <- as.numeric(strsplit(input, " ")[[1]])
arr <- array(dim=dims)
ii <- ceiling(dims[1]/2)
jj <- ceiling(dims[2]/2)
arr[ii, jj] <- sum(dims)
cat("array[", ii, ",", jj, "] is ", arr[ii, jj], "\n", sep="")

Racket

Using a vector of vectors to represent arrays:

#lang racket

(printf "Enter XY dimensions: ")
(define xy (cons (read) (read)))
(define array (for/vector ([x (car xy)]) (for/vector ([y (cdr xy)]) 0)))

(printf "Enter a number for the top-left: ")
(vector-set! (vector-ref array 0) 0 (read))
(printf "Enter a number for the bottom-right: ")
(vector-set! (vector-ref array (sub1 (car xy))) (sub1 (cdr xy)) (read))

array

Output:

Enter XY dimensions: 3 3
Enter a number for the top-left: 1
Enter a number for the bottom-right: 9
'#(#(1 0 0) #(0 0 0) #(0 0 9))

Raku

(formerly Perl 6)

Works with: rakudo version 2015-11-28

Line 1: The input parse doesn't care how you separate the dimensions as long as there are two distinct numbers.

Line 2: The list replication operator xx will automatically thunkify its left side so this produces new subarrays for each replication.

Line 3: Subscripting with a closure automatically passes the size of the dimension to the closure, so we pick an appropriate random index on each level.

Line 4: Print each line of the array.

my ($major,$minor) = prompt("Dimensions? ").comb(/\d+/);
my @array = [ '@' xx $minor ] xx $major;
@array[ *.rand ][ *.rand ] = ' ';
.say for @array;

Typical run:

Dimensions? 5x35
[@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @]
[@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @]
[@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @]
[@ @ @ @ @ @ @ @ @ @   @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @]
[@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @]

The most recent versions of Rakudo have preliminary support for 'shaped arrays'. Natively shaped arrays are a flexible feature for declaring typed, potentially multi-dimensional arrays, potentially with pre-defined dimensions. They will make memory-efficient matrix storage and matrix operations possible.

my ($major,$minor) = +«prompt("Dimensions? ").comb(/\d+/);
my Int @array[$major;$minor] = (7 xx $minor ) xx $major;
@array[$major div 2;$minor div 2] = 42;
say @array;

Typical run:

Dimensions? 3 x 10
[[7 7 7 7 7 7 7 7 7 7] [7 7 7 7 7 42 7 7 7 7] [7 7 7 7 7 7 7 7 7 7]]

Red

Red ["Create two-dimensional array at runtime"]

width: to-integer ask "What is the width of the array? "
height: to-integer ask "What is the height of the array? "

                                      ; 2D arrays are just nested blocks in Red.
matrix: copy []                       ; Make an empty block to hold our rows.
loop height [                         ; A loop for each row...
    row: append/dup copy [] 0 width   ; Create a block like [0 0 0 0] if width is 4.
    append/only matrix row            ; Append the row to our matrix as its own block.
]

a: 3
b: 2
matrix/2/4: 27      ; use path syntax to access or assign
matrix/1/1: 99      ; series are 1-indexed in Red; there is no matrix/0/0
matrix/(a)/(a): 10  ; accessing elements with words requires special care
matrix/:b/:b: 33    ; alternative
print mold matrix
Output:
What is the width of the array? 5
What is the height of the array? 3
[[99 0 0 0 0] [0 33 0 27 0] [0 0 10 0 0]]

REXX

/*REXX program  allocates/populates/displays  a two-dimensional array.  */
call bloat                   /*the BLOAT procedure does all allocations.*/
                             /*no more array named   @   at this point. */
exit                         /*stick a fork in it, we're all done honey.*/
/*─────────────────────────BLOAT subroutine─────────────────────────────*/
bloat: procedure;  say       /*"PROCEDURE"  makes this a ··· procedure. */
say 'Enter two positive integers (a 2-dimensional array will be created).'
pull n m .                   /*elements are allocated as they're defined*/
                             /*N and M should be verified at this point.*/
@.=' · '                     /*Initial value for all  @  array elements,*/
                             /*this ensures  every  element has a value.*/
  do j    =1  for n          /*traipse through the first  dimension  [N]*/
      do k=1  for m          /*   "       "     "  second     "      [M]*/
      if random()//7==0  then @.j.k=j'~'k    /*populate every 7th random*/
      end  /*k*/
  end        /*j*/
                             /* [↓]  display array to console:  row,col */
  do r=1  for n;    _=       /*construct one row (or line) at a time.   */
      do c=1  for m          /*construct row one column at a time.      */
      _=_ right(@.r.c,4)     /*append a nice-aligned column to the line.*/
      end   /*kk*/           /* [↑]   an nicely aligned line is built.  */
  say _                      /*display one row at a time to the terminal*/
  end         /*jj*/
/*╔════════════════════════════════════════════════════════════════════╗
  ║ When the  RETURN  is executed (from a PROCEDURE in this case), and ║
  ║ array   @  is "de─allocated", that is, it's no longer defined, and ║
  ║ the array's storage is now free for other REXX variables.   If the ║
  ║ BLOAT   subroutine didn't have a   "PROCEDURE"   on that statement,║
  ║ the array    @    would've been left intact.    The same effect is ║
  ║ performed by a   DROP   statement   (an example is shown below).   ║
  ╚════════════════════════════════════════════════════════════════════╝*/
drop @.                      /*because of the  PROCEDURE  statement, the*/
return                       /* [↑]    DROP   statement is superfluous. */

output when the following input is entered after the prompt message:   30 15

   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·  1~12   ·    ·    ·
   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·  2~13   ·    ·
   ·   3~2   ·    ·    ·    ·    ·    ·    ·    ·  3~11   ·    ·    ·  3~15
   ·    ·    ·    ·    ·   4~6   ·    ·    ·    ·    ·    ·    ·    ·    ·
   ·   5~2   ·    ·    ·    ·    ·    ·   5~9   ·    ·    ·    ·    ·    ·
   ·    ·    ·   6~4   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·
   ·   7~2  7~3   ·    ·    ·    ·    ·    ·    ·  7~11   ·    ·  7~14   ·
   ·    ·   8~3   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·
   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·
   ·    ·    ·    ·    ·    ·    ·  10~8   ·    ·    ·  0~12   ·    ·    ·
   ·    ·    ·    ·    ·    ·  11~7   ·    ·    ·    ·    ·    ·    ·    ·
 12~1   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·  2~15
   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·  3~13   ·    ·
 14~1   ·    ·    ·    ·  14~6   ·    ·    ·    ·    ·    ·    ·  4~14   ·
 15~1 15~2   ·    ·    ·    ·    ·    ·    ·    ·    ·  5~12   ·    ·    ·
 16~1   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·
   ·    ·    ·    ·    ·    ·    ·    ·    ·  7~10   ·  7~12   ·  7~14   ·
   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·  8~11   ·    ·    ·    ·
   ·    ·    ·    ·    ·  19~6   ·    ·    ·    ·  9~11   ·    ·    ·    ·
 20~1   ·    ·    ·    ·    ·    ·  20~8   ·    ·  0~11   ·    ·    ·    ·
   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·
   ·    ·    ·    ·    ·  22~6   ·    ·    ·    ·    ·    ·    ·  2~14   ·
   ·    ·    ·    ·    ·    ·    ·  23~8   ·    ·    ·    ·    ·    ·    ·
   ·    ·    ·    ·  24~5 24~6   ·    ·    ·    ·    ·    ·  4~13   ·    ·
   ·    ·    ·    ·    ·    ·    ·    ·    ·  5~10   ·    ·    ·    ·    ·
   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·
 27~1   ·  27~3   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·  7~15
   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·  8~15
   ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·    ·
   ·    ·    ·    ·    ·  30~6   ·  30~8 30~9   ·    ·    ·    ·    ·    ·

Ring

See 'Enter width : ' give width
See 'Enter height : ' give height
width=0+width   height=0+height
aList = list(height) for x in aList  x = list(width) next
aList[1][2] = 10  See aList[1][2] + nl


« "# rows?" "3" INPUT "# columns?" "5" INPUT    @  ask for size, with 3 and 5 as default values
  2 →LIST STR→ 0 CON                            @  create array in stack
  { 1 2 } TIME PUT                              @  put current time at array[1,2] 
  { 1 2 } GET                                   @  read array[1,2] and remove array from the stack  
» 'TASK' STO

Ruby

puts 'Enter width and height: '
w=gets.to_i
arr = Array.new(gets.to_i){Array.new(w)}
arr[1][3] = 5
p arr[1][3]

Rust

use std::env;

fn main() {
    let mut args = env::args().skip(1).flat_map(|num| num.parse());
    let rows = args.next().expect("Expected number of rows as first argument");
    let cols = args.next().expect("Expected number of columns as second argument");

    assert_ne!(rows, 0, "rows were zero");
    assert_ne!(cols, 0, "cols were zero");

    // Creates a vector of vectors with all elements initialized to 0.
    let mut v = vec![vec![0; cols]; rows];
    v[0][0] = 1;
    println!("{}", v[0][0]);
}

S-BASIC

var a, b = integer

print "Two-Dimensional Array Example"
input "Size of first dimension"; a
input "Size of second dimension"; b

dim integer test_array(a, b)

test_array(1,1) = 99    rem S-BASIC arrays are indexed from 1

print "Value stored at 1,1 ="; test_array(1,1)

end
Output:
Two-Dimensional Array Example
Size of first dimension? 7
Size of second dimension? 7
Value stored at 1,1 = 99

Scala

object Array2D{
   def main(args: Array[String]): Unit = {
      val x = Console.readInt
      val y = Console.readInt

      val a=Array.fill(x, y)(0)
      a(0)(0)=42
      println("The number at (0, 0) is "+a(0)(0))
   }
}

Scheme

Pure R7RS

There is no two-dimensional array-type built in to Scheme, but there is a vector.

(import (scheme base)
        (scheme read)
        (scheme write))

;; Read x/y from user
(define x (begin (display "X: ") (flush-output-port) (read)))
(define y (begin (display "Y: ") (flush-output-port) (read)))

;; Create a vector, and fill it with a vector for each row
(define arr (make-vector x))
(do ((i 0 (+ 1 i)))
  ((= i x) )
  (vector-set! arr i (make-vector y 0)))

;; set element (x/2, y/2) to 3
(vector-set! (vector-ref arr (floor (/ x 2)))
             (floor (/ y 2))
             3)

(display arr) (newline)
(display "Retrieved: ")
(display (vector-ref (vector-ref arr (floor (/ x 2)))
                     (floor (/ y 2))))
(newline)
Output:
X: 3
Y: 5
#(#(0 0 0 0 0) #(0 0 3 0 0) #(0 0 0 0 0))
Retrieved: 3

Using a standard library

Library: Scheme/SRFIs

There are SRFI libraries providing arrays. This example uses SRFI 63.

(import (except (scheme base) equal?)
        (scheme read)
        (scheme write)
        (srfi 63)       ; an array SRFI
        )

;; Read x/y from user
(define x (begin (display "X: ") (flush-output-port) (read)))
(define y (begin (display "Y: ") (flush-output-port) (read)))

;; Create an array
(define array (make-array #(0) x y))

;; Write to middle element of the array
(array-set! array 3 (floor (/ x 2)) (floor (/ y 2)))

;; Retrieve and display result
(display (array-ref array (floor (/ x 2)) (floor (/ y 2)))) (newline)
Output:
X: 3
Y: 5
3

The array will be destroyed by the garbage collector, when it is no longer needed.

Seed7

$ include "seed7_05.s7i";

const proc: main is func
  local
    var integer: numRows is 0;
    var integer: numCols is 0;
    var array array integer: anArray is 0 times 0 times 0;
  begin
    write("Give me the numer of rows: ");
    readln(numRows); 
    write("Give me the numer of columns: ");
    readln(numCols);
    anArray := numRows times numCols times 0;
    anArray[1][1] := 3;
    writeln("The number at place [1, 1] is " <& anArray[1][1]);
  end func;

Output:

Give me the numer of rows: 5
Give me the numer of columns: 7
The number at place [1, 1] is 3

Sidef

func make_matrix(x, y) {
    y.of { x.of(0) };
}

var y = Sys.scanln("rows: ").to_i;
var x = Sys.scanln("cols: ").to_i;

var matrix = make_matrix(x, y);   # create the matrix
matrix[y/2][x/2] = 1;             # write something inside it
say matrix;                       # display the matrix
Output:
rows: 3
cols: 4  
[[0, 0, 0, 0], [0, 0, 1, 0], [0, 0, 0, 0]]

Simula

BEGIN
    INTEGER N,M;
    M := ININT;
    N := ININT;
    BEGIN
        INTEGER ARRAY A(1:M,1:N);
        A(M,N) := 99;
        OUTINT(A(M,N),0);
        OUTIMAGE;
    END;
    ! ARRAY A OUT OF SCOPE ;
END.
Input:
10 20
Output:
99

Slope

(define width (string->number (read-line)))
(define height (string->number (read-line)))
(if (and width height)
  (list-seed height (list-seed width #t))
  (! "A non-number value was submitted"))

Smalltalk

Works with: Pharo
m := (FillInTheBlankMorph request: 'Number of rows?') asNumber.
n := (FillInTheBlankMorph request: 'Number of columns?') asNumber.
aMatrix := Matrix rows: m columns: n.
aMatrix 
	at: (aMatrix rowCount // 2) 
	at: (aMatrix columnCount // 2) 
	put: 3.4.
e := aMatrix 
	at: (aMatrix rowCount // 2) 
	at: (aMatrix columnCount // 2).
Transcript show: 'Entry is', e printString.
Works with: GNU Smalltalk

Smalltalk has no problems in creating objects at runtime. I haven't found a class for multidimensional array in the standard library, so let us suppose to have a class named MultidimensionalArray.

|num1 num2 arr|
num1 := stdin nextLine asInteger.
num2 := stdin nextLine asInteger.

arr := MultidimensionalArray new: { num1. num2 }.

1 to: num1 do: [ :i |
  1 to: num2 do: [ :j |
    arr at: { i. j } put: (i*j)
  ]
].

1 to: num1 do: [ :i |
  1 to: num2 do: [ :j |
    (arr at: {i. j}) displayNl
  ]
].

A possible implementation for a BidimensionalArray class is the following (changing Multi into Bi and using this class, the previous code runs fine):

Object subclass: BidimensionalArray [
  |biArr|
  <comment: 'bidim array'>
].
BidimensionalArray class extend [
  new: biDim [ |r|
    r := super new.
    r init: biDim.
    ^ r
  ]
].
BidimensionalArray extend [
  init: biDim [
     biArr := Array new: (biDim at: 1).
     1 to: (biDim at: 1) do: [ :i |
       biArr at: i put: (Array new: (biDim at: 2))
     ].
     ^ self
  ]
  at: biDim [
     ^ (biArr at: (biDim at: 1)) at: (biDim at: 2)
  ]
  at: biDim put: val [
     ^ (biArr at: (biDim at: 1)) at: (biDim at: 2) put: val
  ]
].

Instead of implementing such a class (or the MultidimensionalArray one), we can use a LookupTable class, using Array objects as keys (each element of the array will be an index for a specific dimension of the "array"). The final effect is the same as using an array (almost in the AWK sense) and the approach has some advantages.

|num1 num2 pseudoArr|
num1 := stdin nextLine asInteger.
num2 := stdin nextLine asInteger.

"we can 'suggest' an initial value for the number
 of ''slot'' the table can hold; anyway, if we use
 more than these, the table automatically grows"
pseudoArr := LookupTable new: (num1 * num2).

1 to: num1 do: [ :i |
  1 to: num2 do: [ :j |
     pseudoArr at: {i. j} put: (i * j).
  ]
].

1 to: num1 do: [ :i |
  1 to: num2 do: [ :j |
     (pseudoArr at: {i. j}) displayNl.
  ]
].

SNOBOL4

Works with: Macro Spitbol
Works with: Snobol4+
Works with: CSnobol

Note: trim(input) is needed for Snobol4+.

*       # Get user X,Y dimensions
        output = 'Enter X,Y:'; xy = trim(input)
        xy break(',') . x ',' rem . y

*       # Define and create array, 1-based
        arr = array(x ',' y) ;* Or arr = array(xy)

*       # Display array prototype
        output = 'Prototype: ' prototype(arr)
        
*       # Assign elements, angle or square brackets
*       # Same array can hold ints, strings, etc.
        arr<x,y> = 99; arr[1,1] = 'dog'
        
*       # Display elements
        output = 'arr[' xy '] = ' arr[x,y]
        output = 'arr[1,1] = ' arr[1,1]
        
*       # Release array for garbage collection
        arr =
end

Output:

Enter X,Y:
5,5
Prototype: 5,5
arr[5,5] = 99
arr[1,1] = dog

Standard ML

val nbr1 = valOf (TextIO.scanStream (Int.scan StringCvt.DEC) TextIO.stdIn);
val nbr2 = valOf (TextIO.scanStream (Int.scan StringCvt.DEC) TextIO.stdIn);
val array = Array2.array (nbr1, nbr2, 0.0);
Array2.update (array, 0, 0, 3.5);
print (Real.toString (Array2.sub (array, 0, 0)) ^ "\n");

Stata

display "Number of rows?" _request(nr)
display "Number of columns?" _request(nc)
matrix define a=J($nr,$nc,0)
matrix a[1,2]=1.5
matrix list a
matrix drop a

This is also possible in Mata, except that console input is still done from Stata:

mata
mata stata display "Number of rows?" _request(nr)
mata stata display "Number of columns?" _request(nc)
nr = strtoreal(st_global("nr"))
nc = strtoreal(st_global("nc"))
a = J(nr,nc,0)
a[1,2] = 1.5
a
mata drop a
end

Swift

import Foundation

print("Enter the dimensions of the array seperated by a space (width height): ")

let fileHandle = NSFileHandle.fileHandleWithStandardInput()
let dims = NSString(data: fileHandle.availableData, encoding: NSUTF8StringEncoding)?.componentsSeparatedByString(" ")

if let dims = dims where dims.count == 2{
	let w = dims[0].integerValue
	let h = dims[1].integerValue

	if let w = w, h = h where w > 0 && h > 0 {
		var array = Array<[Int!]>(count: h, repeatedValue: Array<Int!>(count: w, repeatedValue: nil))

		array[0][0] = 2
		println(array[0][0])
		println(array)
	}
}
Output:
Enter the dimensions of the array seperated by a space (width height): 3 4
2
[[2, nil, nil], [nil, nil, nil], [nil, nil, nil], [nil, nil, nil]]

Tcl

Works with: Tcl version 8.5
puts "Enter width:"
set width [gets stdin]
puts "Enter height:"
set height [gets stdin]
# Initialize array
for {set i 0} {$i < $width} {incr i} {
	for {set j 0} {$j < $height} {incr j} {
		set arr($i,$j) ""
	}
}
# Store value
set arr(0,0) "abc"
# Print value
puts "Element (0/0): $arr(0,0)"
# Cleanup array
unset arr

Toka

Toka has no direct support for 2D arrays, but they can be created and operated on in a manner similar to normal arrays using the following functions.

[ ( x y -- address )
  cells malloc >r
  dup cells >r
  [ r> r> r> 2dup >r >r swap malloc swap i swap array.put >r ] iterate
r> r> nip
] is 2D-array

[ ( a b address -- value )
  array.get array.get
] is 2D-get-element

[ ( value a b address -- )
  array.get array.put
] is 2D-put-element

And a short test:

5 5 2D-array >r             #! Create an array and save the pointer to it
10 2 3 r@ 2D-put-element    #! Set element 2,3 to 10
2 3 r@ 2D-get-element       #! Get the element at 2,3
r> drop                     #! Discard the pointer to the array

Ursa

decl int width height
out "width:  " console
set width (in int console)
out "height: " console
set height (in int console)

decl int<><> twodstream
for (decl int i) (< i height) (inc i)
        append (new int<>) twodstream
end for
for (set i 0) (< i height) (inc i)
        decl int j
        for (set j 0) (< j width) (inc j)
                append 0 twodstream<i>
        end for
end for

set twodstream<0><0> 5
out twodstream<0><0> endl console

VBA

Option Explicit

Sub Main_Create_Array()
Dim NbColumns As Integer, NbRows As Integer
    
    'Get two integers from the user,
    Do
        NbColumns = Application.InputBox("Enter number of columns : ", "Numeric only", 3, Type:=1)
        NbRows = Application.InputBox("Enter number of rows : ", "Numeric only", 5, Type:=1)
    Loop While NbColumns = 0 Or NbRows = 0
    'Create a two-dimensional array at runtime
    ReDim myArray(1 To NbRows, 1 To NbColumns)
    'Write some element of that array,
    myArray(LBound(myArray, 1), UBound(myArray, 2)) = "Toto"
    'and then output that element.
    MsgBox myArray(LBound(myArray, 1), UBound(myArray, 2))
    'destroy the array
    Erase myArray
End Sub

Vim Script

" Create a two-dimensional array with r rows and c columns.
" The optional third argument specifies the initial value
" (default is 0).
function MakeArray(r, c, ...)
    if a:0
        let init = a:1
    else
        let init = 0
    endif

    let temp = []
    for c in range(a:c) 
        call add(temp, init)
    endfor

    let array = []
    for r in range(a:r)
        call add(array, temp[:])
    endfor
    return array
endfunction

let rows = input("Enter number of rows: ")
let cols = input("Enter number of columns: ")
echo "\n"
let array = MakeArray(rows, cols)
let array[rows - 1][cols - 1] = rows * cols
echo array[rows - 1][cols - 1]
unlet array

V (Vlang)

import os

fn main() {
	// input 
	mut row := os.input("enter rows: ").str()
	for elem in row {if elem.is_digit() == false {println('Input Error!') exit(1)}}
	mut col := os.input("enter cols: ").str()	
	for elem in col {if elem.is_digit() == false {println('Input Error!') exit(1)}}
	
	// create 2d array of specified size
	mut arr2d := [][]int{len: row.int(), init: []int{len: col.int()}}

	// assign values
	arr2d[0][0] = 7

	// view
	println(arr2d)

	// clear
	arr2d.clear()
}
Output:
enter rows: 3
enter cols: 3
[[7, 0, 0], [0, 0, 0], [0, 0, 0]]

Wren

import "io" for Stdin, Stdout

var x
var y
System.print("Enter the dimensions of the array:")
while (true) {
    System.write("  First dimension  : ")
    Stdout.flush()
    x = Num.fromString(Stdin.readLine())
    if (x && (x is Num) && (x.isInteger) && (x > 0) ) {
        System.write("  Second dimension : ")
        Stdout.flush()
        y = Num.fromString(Stdin.readLine())
        if (y && (y is Num) && (y.isInteger) && (y > 0) ) break
        System.print("Dimension must be a positive integer.")
    } else {
        System.print("Dimension must be a positive integer.")
    }
}
// create the 2d array
var a = List.filled(x, null)
for (i in 0...x) a[i] = List.filled(y, 0)
// write an element
a[x - 1][y - 1] = 42
// print it
System.print("\na[%(x-1)][%(y-1)] = %(a[x-1][y-1])")
// make the array eligible for garbage collection
a = null
Output:

Example session:

Enter the dimensions of the array:
  First dimension  : 3
  Second dimension : 4

a[2][3] = 42

XPL0

inc     c:\cxpl\codes;  \(command words can be abbreviated to first 3 letters)
def     IntSize=4;      \number of bytes in an integer (2 or 4 depending on version)
int     X, Y, A, I;
[X:= IntIn(0);  Y:= IntIn(0);           \get 2 dimensions from user
A:= Reserve(X*IntSize);
for I:= 0 to X-1 do A(I):= Reserve(Y*IntSize);
A(X/2, Y/2):= X+Y;
IntOut(0, A(X/2, Y/2));  CrLf(0);
]

Space allocated by the Reserve intrinsic is automatically released when the procedure that calls Release returns.

Example of a 12000x100 integer array for a total of 1.2 million integers:

12000 100
12100

zkl

zkl doesn't have a native array type but lists of lists can do the same thing. It is garbage collected so things are cleaned up implicitly.

This code creates a 2d row major zero filled array.

Since the array is row major, sub-scripting works as expected: [row][col].

rows:=ask("Rows: ").toInt();
cols:=ask("columns: ").toInt();
array:=rows.pump(List.createLong(rows),List.createLong(cols,0).copy);
array[1][2]=123;
array.println();
array[1][2].println();

The createLong method pre-allocates a list, optionally filled with a constant or computation.

Output:
Rows: 3
columns: 4
L(L(0,0,0,0),L(0,0,123,0),L(0,0,0,0))
123

If you want Matrix/linear algebra, you can use the GNU Scientific Library:

var [const] GSL=Import("zklGSL");	// libGSL (GNU Scientific Library)
rows:=ask("Rows: ").toInt();
cols:=ask("columns: ").toInt();
m:=GSL.Matrix(rows,cols);
m[1,2]=123;
m.format().println();
println(m[1,2]);

Again, garbage collected.

Output:
Rows: 3
columns: 4
      0.00,      0.00,      0.00,      0.00
      0.00,      0.00,    123.00,      0.00
      0.00,      0.00,      0.00,      0.00
123

zonnon

module Main;
type
	Matrix = array *,* of integer;

var
	m: Matrix;
	i,j: integer;
begin
	write("first dim? ");readln(i);
	write("second dim? ");readln(j);
	m := new Matrix(i,j);
	m[0,0] := 10;
	writeln("m[0,0]:> ",m[0,0]);
	writeln("m[0,1].> ",m[0,1])
end Main.
Output:
first dim? 10
second dim? 10
m[0,0]:>                   10
m[0,1].>                    0