# Möbius function

Möbius function
You are encouraged to solve this task according to the task description, using any language you may know.

The classical Möbius function: μ(n) is an important multiplicative function in number theory and combinatorics.

There are several ways to implement a Möbius function.

A fairly straightforward method is to find the prime factors of a positive integer n, then define μ(n) based on the sum of the primitive factors. It has the values {−1, 0, 1} depending on the factorization of n:

• μ(1) is defined to be 1.
• μ(n) = 1 if n is a square-free positive integer with an even number of prime factors.
• μ(n) = −1 if n is a square-free positive integer with an odd number of prime factors.
• μ(n) = 0 if n has a squared prime factor.

• Write a routine (function, procedure, whatever) μ(n) to find the Möbius number for a positive integer n.
• Use that routine to find and display here, on this page, at least the first 99 terms in a grid layout. (Not just one long line or column of numbers.)

## ALGOL 68

Translation of: C
```BEGIN
# show the first 199 values of the moebius function                 #
INT sq root = 1 000;
INT mu max  = sq root * sq root;
[ 1 : mu max ]INT mu;
FOR i FROM LWB mu TO UPB mu DO mu[ i ] := 1 OD;
FOR i FROM 2 TO sq root DO
IF mu[ i ] = 1 THEN
# for each factor found, swap + and -                       #
FOR j FROM i     BY i     TO UPB mu DO mu[ j ] *:= -i OD;
FOR j FROM i * i BY i * i TO UPB mu DO mu[ j ]  :=  0 OD
FI
OD;
FOR i FROM 2 TO UPB mu DO
IF   mu[ i ] =  i THEN mu[ i ] :=  1
ELIF mu[ i ] = -i THEN mu[ i ] := -1
ELIF mu[ i ] <  0 THEN mu[ i ] :=  1
ELIF mu[ i ] >  0 THEN mu[ i ] := -1
# ELSE mu[ i ] =  0 so no change #
FI
OD;
print( ( "First 199 terms of the möbius function are as follows:", newline, "    " ) );
FOR i TO 199 DO
print( ( whole( mu[ i ], -4 ) ) );
IF ( i + 1 ) MOD 20 = 0 THEN print( ( newline ) ) FI
OD
END```
Output:
```First 199 terms of the möbius function are as follows:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1
```

## Arturo

```mobius: function [n][
if n=0 -> return ""
if n=1 -> return 1
f: factors.prime n

if f <> unique f -> return 0
if? odd? size f -> return neg 1
else -> return 1
]

loop split.every:20 map 0..199 => mobius 'a ->
print map a => [pad to :string & 3]
```
Output:
```      1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1```

## AutoHotkey

```loop 100
result .= SubStr("  " Möbius(A_Index), -1) . (Mod(A_Index, 10) ? "  " : "`n")
MsgBox, 262144, , % result
return

Möbius(n){
if n=1
return 1
x := prime_factors(n)
c := x.Count()
sq := []
for i, v in x
if sq[v]
return 0
else
sq[v] := 1
return (c/2 = floor(c/2)) ? 1 : -1
}

prime_factors(n) {
if (n <= 3)
return [n]
ans := [], done := false
while !done {
if !Mod(n, 2)
ans.push(2), n /= 2
else if !Mod(n, 3)
ans.push(3), n /= 3
else if (n = 1)
return ans
else {
sr := sqrt(n), done := true, i := 6
while (i <= sr+6) {
if !Mod(n, i-1) { ; is n divisible by i-1?
ans.push(i-1), n /= i-1, done := false
break
}
if !Mod(n, i+1) { ; is n divisible by i+1?
ans.push(i+1), n /= i+1, done := false
break
}
i += 6
}}}
ans.push(Format("{:d}", n))
return ans
}
```
Output:
``` 1  -1  -1   0  -1   1  -1   0   0   1
-1   0  -1   1   1   0  -1   0  -1   0
1   1  -1   0   0   1   0   0  -1  -1
-1   0   1   1   1   0  -1   1   1   0
-1  -1  -1   0   0   1  -1   0   0   0
1   0  -1   0   1   0   1   1  -1   0
-1   1   0   0   1  -1  -1   0   1  -1
-1   0  -1   1   0   0   1  -1  -1   0
0   1  -1   0   1   1   1   0  -1   0
1   0   1   1   1   0  -1   0   0   0```

## AWK

```# syntax: GAWK -f MOBIUS_FUNCTION.AWK
# converted from Java
BEGIN {
printf("first 199 terms of the mobius sequence:\n   ")
for (n=1; n<200; n++) {
printf("%3d",mobius(n))
if ((n+1) % 20 == 0) {
printf("\n")
}
}
exit(0)
}
function mobius(n,  i,j,mu_max) {
if (n in MU) {
return(MU[n])
}
mu_max = 1000000
for (i=0; i<mu_max; i++) { # populate array
MU[i] = 1
}
for (i=2; i<=int(sqrt(mu_max)); i++ ) {
if (MU[i] == 1) {
for (j=i; j<=mu_max; j+=i) { # for each factor found, swap + and -
MU[j] *= -i
}
for (j=i*i; j<=mu_max; j+=i*i) { # square factor = 0
MU[j] = 0
}
}
}
for (i=2; i<=mu_max; i++) {
if (MU[i] == i) {
MU[i] = 1
}
else if (MU[i] == -i) {
MU[i] = -1
}
else if (MU[i] < 0) {
MU[i] = 1
}
else if (MU[i] > 0) {
MU[i] = -1
}
}
return(MU[n])
}
```
Output:
```first 199 terms of the mobius sequence:
1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1
0  1  1 -1  0  0  1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1
0 -1 -1 -1  0  0  1 -1  0  0  0  1  0 -1  0  1  0  1  1 -1
0 -1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0  0  1 -1 -1
0  0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0
0 -1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1
0  0  1  1  0  0  0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1
0  1  1  1  0  1  1  0  0 -1  0 -1  0  0 -1  1  0 -1  1  1
0  1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0  0  1  1 -1
0 -1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1
```

## BASIC256

Translation of: FreeBASIC
```function mobius(n)
if n = 1 then return 1
for d = 2 to int(sqr(n))
if n mod d = 0 then
if n mod (d*d) = 0 then return 0
return -mobius(n/d)
end if
next d
return -1
end function

outstr\$ = " .   "
for i = 1 to 200
if mobius(i) >= 0 then outstr\$ += " "
outstr\$ += string(mobius(i)) + "   "
if i mod 10 = 9 then
print outstr\$
outstr\$ = ""
end if
next i
end```
Output:
```Igual que la entrada de FreeBASIC.
```

## C

Translation of: Java
```#include <math.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

int main() {
const int MU_MAX = 1000000;
int i, j;
int *mu;
int sqroot;

sqroot = (int)sqrt(MU_MAX);

mu = malloc((MU_MAX + 1) * sizeof(int));

for (i = 0; i < MU_MAX;i++) {
mu[i] = 1;
}

for (i = 2; i <= sqroot; i++) {
if (mu[i] == 1) {
// for each factor found, swap + and -
for (j = i; j <= MU_MAX; j += i) {
mu[j] *= -i;
}
// square factor = 0
for (j = i * i; j <= MU_MAX; j += i * i) {
mu[j] = 0;
}
}
}

for (i = 2; i <= MU_MAX; i++) {
if (mu[i] == i) {
mu[i] = 1;
} else if (mu[i] == -i) {
mu[i] = -1;
} else if (mu[i] < 0) {
mu[i] = 1;
} else if (mu[i] > 0) {
mu[i] = -1;
}
}

printf("First 199 terms of the möbius function are as follows:\n    ");
for (i = 1; i < 200; i++) {
printf("%2d  ", mu[i]);
if ((i + 1) % 20 == 0) {
printf("\n");
}
}

free(mu);
return 0;
}
```
Output:
```First 199 terms of the m÷bius function are as follows:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1```

## C++

Translation of: Java
```#include <iomanip>
#include <iostream>
#include <vector>

constexpr int MU_MAX = 1'000'000;
std::vector<int> MU;

int mobiusFunction(int n) {
if (!MU.empty()) {
return MU[n];
}

// Populate array
MU.resize(MU_MAX + 1, 1);
int root = sqrt(MU_MAX);

for (int i = 2; i <= root; i++) {
if (MU[i] == 1) {
// for each factor found, swap + and -
for (int j = i; j <= MU_MAX; j += i) {
MU[j] *= -i;
}
// square factor = 0
for (int j = i * i; j <= MU_MAX; j += i * i) {
MU[j] = 0;
}
}
}

for (int i = 2; i <= MU_MAX; i++) {
if (MU[i] == i) {
MU[i] = 1;
} else if (MU[i] == -i) {
MU[i] = -1;
} else if (MU[i] < 0) {
MU[i] = 1;
} else if (MU[i] > 0) {
MU[i] = -1;
}
}

return MU[n];
}

int main() {
std::cout << "First 199 terms of the möbius function are as follows:\n    ";
for (int n = 1; n < 200; n++) {
std::cout << std::setw(2) << mobiusFunction(n) << "  ";
if ((n + 1) % 20 == 0) {
std::cout << '\n';
}
}

return 0;
}
```
Output:
```First 199 terms of the m÷bius function are as follows:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1```

## D

Translation of: C++
```import std.math;
import std.stdio;

immutable MU_MAX = 1_000_000;

int mobiusFunction(int n) {
static initialized = false;
static int[MU_MAX + 1] MU;

if (initialized) {
return MU[n];
}

// populate array
MU[] = 1;
int root = cast(int) sqrt(cast(real) MU_MAX);

for (int i = 2; i <= root; i++) {
if (MU[i] == 1) {
// for each factor found, swap + and -
for (int j = i; j <= MU_MAX; j += i) {
MU[j] *= -i;
}
// square factor = 0
for (int j = i * i; j <= MU_MAX; j += i * i) {
MU[j] = 0;
}
}
}

for (int i = 2; i <= MU_MAX; i++) {
if (MU[i] == i) {
MU[i] = 1;
} else if (MU[i] == -i) {
MU[i] = -1;
} else if (MU[i] < 0) {
MU[i] = 1;
} else if (MU[i] > 0) {
MU[i] = -1;
}
}

initialized = true;
return MU[n];
}

void main() {
writeln("First 199 terms of the möbius function are as follows:");
write("    ");
for (int n = 1; n < 200; n++) {
writef("%2d  ", mobiusFunction(n));
if ((n + 1) % 20 == 0) {
writeln;
}
}
}
```
Output:
```First 199 terms of the m├╢bius function are as follows:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1```

## F#

This task uses Extensible Prime Generator (F#)

```// Möbius function. Nigel Galloway: January 31st., 2021
let fN g=let n=primes32()
let rec fN i g e l=match (l/g,l%g,e) with (1,0,false)->i
|(n,0,false)->fN (0-i) g true n
|(_,0,true) ->0
|_          ->fN i (Seq.head n) false l
fN -1 (Seq.head n) false g
let mobius=seq{yield 1; yield! Seq.initInfinite((+)2>>fN)}
mobius|>Seq.take 500|>Seq.chunkBySize 25|>Seq.iter(fun n->Array.iter(printf "%3d") n;printfn "")
```
Output:
```  1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1  0  1  1 -1  0  0
1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1  0 -1 -1 -1  0  0  1 -1  0  0  0
1  0 -1  0  1  0  1  1 -1  0 -1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0
0  1 -1 -1  0  0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0  0
-1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1  0  0  1  1  0  0
0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1  0  1  1  1  0  1  1  0  0 -1  0
-1  0  0 -1  1  0 -1  1  1  0  1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0
0  1  1 -1  0 -1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1  0
1  1  1  0  1  1  0  0  1  1 -1  0  1  1  1  0  1  1  1  0  1 -1 -1  0  0
1 -1  0 -1 -1 -1  0 -1  0  1  0  1 -1 -1  0 -1  0  0  0  0 -1  1  0  1  0
-1  0  1  1 -1  0 -1 -1  1  0  0  1 -1  0  1 -1  1  0 -1  0 -1  0 -1  1  0
0 -1  1  0  0 -1 -1 -1  0 -1 -1  1  0  0 -1  1  0 -1  0  1  0  0  1  1  0
1  1  1  0  1  0 -1  0  1 -1 -1  0 -1  1  0  0 -1 -1  1  0  1 -1  1  0  0
1  1  0  1  1 -1  0  0  1  1  0 -1  0  1  0  1  0  0  0 -1  1 -1  0 -1  0
0  0 -1 -1  1  0 -1  1 -1  0  0  1  0  0  1 -1 -1  0  0 -1  1  0 -1 -1  0
0  1  0 -1  0  1  1 -1  0 -1  1  0  0 -1  1  1  0  1  1  1  0 -1  1 -1  0
-1 -1  1  0  0 -1  1  0 -1 -1  1  0  1  0  1  0  1 -1 -1  0 -1  1  0  0  0
-1  1  0 -1 -1 -1  0 -1 -1 -1  0  1 -1 -1  0  0 -1 -1  0  1  1  1  0 -1  0
1  0  1  1 -1  0 -1  1  0  0 -1  1 -1  0 -1  1 -1  0  1 -1  1  0  1 -1  0
0  0  1 -1  0  1  1 -1  0  1  0 -1  0  1  0 -1  0  1 -1  0  0  1 -1 -1  0
```

## Factor

The `mobius` word exists in the `math.extras` vocabulary. See the implementation here.

Works with: Factor version 0.99 2020-01-23
```USING: formatting grouping io math.extras math.ranges sequences ;

"First 199 terms of the Möbius sequence:" print
199 [1,b] [ mobius ] map " " prefix 20 group
[ [ "%3s" printf ] each nl ] each
```
Output:
```First 199 terms of the Möbius sequence:
1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1
0  1  1 -1  0  0  1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1
0 -1 -1 -1  0  0  1 -1  0  0  0  1  0 -1  0  1  0  1  1 -1
0 -1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0  0  1 -1 -1
0  0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0
0 -1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1
0  0  1  1  0  0  0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1
0  1  1  1  0  1  1  0  0 -1  0 -1  0  0 -1  1  0 -1  1  1
0  1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0  0  1  1 -1
0 -1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1
```

## Fortran

Translation of: C
```program moebius
use iso_fortran_env, only: output_unit

integer, parameter          :: mu_max=1000000, line_break=20
integer, parameter          :: sqroot=int(sqrt(real(mu_max)))
integer                     :: i, j
integer, dimension(mu_max)  :: mu

mu = 1

do i = 2, sqroot
if (mu(i) == 1) then
do j = i, mu_max, i
mu(j) = mu(j) * (-i)
end do

do j = i**2, mu_max, i**2
mu(j) = 0
end do
end if
end do

do i = 2, mu_max
if (mu(i) == i) then
mu(i) = 1
else if (mu(i) == -i) then
mu(i) = -1
else if (mu(i) < 0) then
mu(i) = 1
else if (mu(i) > 0) then
mu(i) = -1
end if
end do

write(output_unit,*) "The first 199 terms of the Möbius sequence are:"
write(output_unit,'(3x)', advance="no") ! Alignment of first number
do i = 1, 199
if (modulo(i+1, line_break) == 0) write(output_unit,*)
end do
end program moebius
```
Output:
``` The first 199 terms of the Möbius sequence are:
1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1
0  1  1 -1  0  0  1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1
0 -1 -1 -1  0  0  1 -1  0  0  0  1  0 -1  0  1  0  1  1 -1
0 -1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0  0  1 -1 -1
0  0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0
0 -1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1
0  0  1  1  0  0  0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1
0  1  1  1  0  1  1  0  0 -1  0 -1  0  0 -1  1  0 -1  1  1
0  1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0  0  1  1 -1
0 -1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1
```

## FreeBASIC

```function mobius( n as uinteger ) as integer
if n = 1 then return 1
for d as uinteger = 2 to int(sqr(n))
if n mod d = 0 then
if n mod (d*d) = 0 then return 0
return -mobius(n/d)
end if
next d
return -1
end function

dim as string outstr = " .     "
for i as uinteger = 1 to 200
if mobius(i)>=0 then outstr += " "
outstr += str(mobius(i))+"     "
if i mod 10 = 9 then
print outstr
outstr = ""
end if
next i
```
Output:
``` .      1     -1     -1      0     -1      1     -1      0      0
1     -1      0     -1      1      1      0     -1      0     -1
0      1      1     -1      0      0      1      0      0     -1
-1     -1      0      1      1      1      0     -1      1      1
0     -1     -1     -1      0      0      1     -1      0      0
0      1      0     -1      0      1      0      1      1     -1
0     -1      1      0      0      1     -1     -1      0      1
-1     -1      0     -1      1      0      0      1     -1     -1
0      0      1     -1      0      1      1      1      0     -1
0      1      0      1      1      1      0     -1      0      0
0     -1     -1     -1      0     -1      1     -1      0     -1
-1      1      0     -1     -1      1      0      0      1      1
0      0      1      1      0      0      0     -1      0      1
-1     -1      0      1      1      0      0     -1     -1     -1
0      1      1      1      0      1      1      0      0     -1
0     -1      0      0     -1      1      0     -1      1      1
0      1      0     -1      0     -1      1     -1      0      0
-1      0      0     -1     -1      0      0      1      1     -1
0     -1     -1      1      0      1     -1      1      0      0
-1     -1      0     -1      1     -1      0     -1      0     -1```

## FutureBasic

```local fn IsPrime( n as long ) as BOOL
BOOL result = YES
long i

if ( n < 2 ) then result = NO : exit fn

for i = 2 to n + 1
if ( i * i <= n ) and ( n mod i == 0 )
result = NO : exit fn
end if
next
end fn = result

local fn Mobius( n as long ) as long
long i, p = 0, result = 0

if ( n == 1 ) then result = 1 : exit fn

for i = 1 to n + 1
if ( n mod i == 0 ) and ( fn IsPrime( i ) == YES )
if ( n mod ( i * i ) == 0 )
result = 0 : exit fn
else
p++
end if
end if
next

if( p mod 2 != 0 )
result = -1
else
result = 1
end if
end fn = result

window 1, @"Möbius function", (0,0,600,300)

printf @"First 100 terms of Mobius sequence:"

long i
for i = 1 to 100
printf @"%2ld\t", fn Mobius(i)
if ( i mod 20 == 0 ) then print
next

HandleEvents```
Output:
```First 100 terms of Mobius sequence:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1   0
1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1   0
-1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1   0
-1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1   0
0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0   0
```

## Go

```package main

import "fmt"

func möbius(to int) []int {
if to < 1 {
to = 1
}
mobs := make([]int, to+1) // all zero by default
primes := []int{2}
for i := 1; i <= to; i++ {
j := i
cp := 0      // counts prime factors
spf := false // true if there is a square prime factor
for _, p := range primes {
if p > j {
break
}
if j%p == 0 {
j /= p
cp++
}
if j%p == 0 {
spf = true
break
}
}
if cp == 0 && i > 2 {
cp = 1
primes = append(primes, i)
}
if !spf {
if cp%2 == 0 {
mobs[i] = 1
} else {
mobs[i] = -1
}
}
}
return mobs
}

func main() {
mobs := möbius(199)
fmt.Println("Möbius sequence - First 199 terms:")
for i := 0; i < 200; i++ {
if i == 0 {
fmt.Print("    ")
continue
}
if i%20 == 0 {
fmt.Println()
}
fmt.Printf("  % d", mobs[i])
}
}
```
Output:
```Möbius sequence - First 199 terms:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1
```

## GW-BASIC

```10 FOR T = 0 TO 9
20 FOR U = 1 TO 10
30 N = 10*T + U
40 GOSUB 100
50 PRINT USING "##  ";M;
60 NEXT U
70 PRINT
80 NEXT T
90 END
100 IF N = 1 THEN M = 1 : RETURN
110 M = 1 : F = 2
120 IF N MOD (F*F) = 0 THEN M = 0 : RETURN
130 IF N MOD F = 0 THEN GOSUB 170
140 F = F + 1
150 IF F <= N THEN GOTO 120
160 RETURN
170 M = -M
180 N = N/F
190 RETURN
```

```import Data.List (intercalate)
import Data.List.Split (chunksOf)
import Data.Vector.Unboxed (toList)
import Math.NumberTheory.ArithmeticFunctions.Moebius (Moebius(..),
sieveBlockMoebius)
import System.Environment (getArgs, getProgName)
import System.IO (hPutStrLn, stderr)

-- Calculate the Möbius function, μ(n), for a sequence of values starting at 1.
moebiusBlock :: Word -> [Moebius]
moebiusBlock = toList . sieveBlockMoebius 1

showMoebiusBlock :: Word -> [Moebius] -> String
showMoebiusBlock cols = intercalate "\n" . map (concatMap showMoebius) .
chunksOf (fromIntegral cols)
where showMoebius MoebiusN = " -1"
showMoebius MoebiusZ = "  0"
showMoebius MoebiusP = "  1"

main :: IO ()
main = do
prog <- getProgName
args <- map readMaybe <\$> getArgs
case args of
[Just cols, Just n] ->
putStrLn ("μ(n) for 1 ≤ n ≤ " ++ show n ++ ":\n") >>
putStrLn (showMoebiusBlock cols \$ moebiusBlock n)
_ -> hPutStrLn stderr \$ "Usage: " ++ prog ++ " num-columns maximum-number"
```
Output:
```μ(n) for 1 ≤ n ≤ 200:

1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1  0
1  1 -1  0  0  1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1  0
-1 -1 -1  0  0  1 -1  0  0  0  1  0 -1  0  1  0  1  1 -1  0
-1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0  0  1 -1 -1  0
0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0  0
-1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1  0
0  1  1  0  0  0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1  0
1  1  1  0  1  1  0  0 -1  0 -1  0  0 -1  1  0 -1  1  1  0
1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0  0  1  1 -1  0
-1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1  0
```

## J

Implementation:

```mu=: ({{*/1-y>1}} * _1 ^ 2|+/)@q:~&_
```

Explanation: _ q: n gives the list of exponents of prime factors of n. (This is an empty list for the number 1, is 2 0 2 for the number 100 and is 3 1 1 for the number 120.)

In this context +/ is the sum of that list, 2 | +/ is 1 if the sum is odd and 0 if the sum is even. _1^0 is 1 and _1^1 is _1. And, {{*/1-y>1}} returns zero if any exponent is at least 2 in magnitude.

```   mu 1+i.10 20
1 _1 _1 0 _1  1 _1 0  0  1 _1 0 _1  1  1 0 _1  0 _1 0
1  1 _1 0  0  1  0 0 _1 _1 _1 0  1  1  1 0 _1  1  1 0
_1 _1 _1 0  0  1 _1 0  0  0  1 0 _1  0  1 0  1  1 _1 0
_1  1  0 0  1 _1 _1 0  1 _1 _1 0 _1  1  0 0  1 _1 _1 0
0  1 _1 0  1  1  1 0 _1  0  1 0  1  1  1 0 _1  0  0 0
_1 _1 _1 0 _1  1 _1 0 _1 _1  1 0 _1 _1  1 0  0  1  1 0
0  1  1 0  0  0 _1 0  1 _1 _1 0  1  1  0 0 _1 _1 _1 0
1  1  1 0  1  1  0 0 _1  0 _1 0  0 _1  1 0 _1  1  1 0
1  0 _1 0 _1  1 _1 0  0 _1  0 0 _1 _1  0 0  1  1 _1 0
_1 _1  1 0  1 _1  1 0  0 _1 _1 0 _1  1 _1 0 _1  0 _1 0
```

## Java

```public class MöbiusFunction {

public static void main(String[] args) {
System.out.printf("First 199 terms of the möbius function are as follows:%n    ");
for ( int n = 1 ; n < 200 ; n++ ) {
System.out.printf("%2d  ", möbiusFunction(n));
if ( (n+1) % 20 == 0 ) {
System.out.printf("%n");
}
}
}

private static int MU_MAX = 1_000_000;
private static int[] MU = null;

//  Compute mobius function via sieve
private static int möbiusFunction(int n) {
if ( MU != null ) {
return MU[n];
}

//  Populate array
MU = new int[MU_MAX+1];
int sqrt = (int) Math.sqrt(MU_MAX);
for ( int i = 0 ; i < MU_MAX ; i++ ) {
MU[i] = 1;
}

for ( int i = 2 ; i <= sqrt ; i++ ) {
if ( MU[i] == 1 ) {
//  for each factor found, swap + and -
for ( int j = i ; j <= MU_MAX ; j += i ) {
MU[j] *= -i;
}
//  square factor = 0
for ( int j = i*i ; j <= MU_MAX ; j += i*i ) {
MU[j] = 0;
}
}
}

for ( int i = 2 ; i <= MU_MAX ; i++ ) {
if ( MU[i] == i ) {
MU[i] = 1;
}
else if ( MU[i] == -i ) {
MU[i] = -1;
}
else if ( MU[i] < 0 ) {
MU[i] = 1;
}
else if ( MU[i] > 0 ) {
MU[i] = -1;
}
}
return MU[n];
}

}
```
Output:
```First 199 terms of the möbius function are as follows:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1

```

## jq

Works with: jq

Works with gojq, the Go implementation of jq

#### Using a Sieve

```# Input: a non-negative integer, \$n
# Output: an array of size \$n + 1 such that the nth-mobius number is .[\$n]
# i.e. \$n|mobius_array[-1]
# For example, the first mobius number could be evaluated by 1|mobius_array[-1].
def mobius_array:
. as \$n
| (\$n|sqrt) as \$sqrt
| reduce range(2; 1 + \$sqrt) as \$i ([range(0; \$n + 1) | 1];
if .[\$i] == 1
then # for each factor found, swap + and -
reduce range(\$i; \$n + 1; \$i) as \$j (.; .[\$j] *= -\$i)
| (\$i*\$i) as \$isq #  square factor = 0
| reduce range(\$isq; \$n + 1; \$isq) as \$j (.; .[\$j] = 0 )
else .
end )
| reduce range(2; 1 + \$n) as \$i (.;
if   .[\$i] ==  \$i then .[\$i] = 1
elif .[\$i] == -\$i then .[\$i] = -1
elif .[\$i]  <   0 then .[\$i] = 1
elif .[\$i]  >   0 then .[\$i] = -1
else .[\$i] = 0                   # avoid "-0"
end);

# For one-off computations:
def mu(\$n): \$n | mobius_array[-1];```

```def nwise(\$n):
def n: if length <= \$n then . else .[0:\$n] , (.[\$n:] | n) end;
n;

def pp: if . >=0 then " \(.)" else tostring end;
(199 | mobius_array) as \$mu
| "The first 199 Möbius numbers are:",
(["  ", (range(1; 200) | \$mu[.] | pp )]
| nwise(20)
| join(" ") ) ;

Output:
```The first 199 Möbius numbers are:
1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1
0  1  1 -1  0  0  1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1
0 -1 -1 -1  0  0  1 -1  0  0  0  1  0 -1  0  1  0  1  1 -1
0 -1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0  0  1 -1 -1
0  0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0
0 -1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1
0  0  1  1  0  0  0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1
0  1  1  1  0  1  1  0  0 -1  0 -1  0  0 -1  1  0 -1  1  1
0  1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0  0  1  1 -1
0 -1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1
```

#### Prime Factors

Note that the following solution to the task at hand (computing a range of Mobius numbers is inefficient as it does not cache the primes array. Preliminaries

```# relatively_prime(previous) tests whether the input integer is prime
# relative to the primes in the array "previous":
def relatively_prime(previous):
. as \$in
| (previous|length) as \$plen
# state: [found, ix]
| [false, 0]
| until( .[0] or .[1] >= \$plen;
[ (\$in % previous[.[1]]) == 0, .[1] + 1] )
| .[0] | not ;

# Emit a stream in increasing order of all primes (from 2 onwards)
# that are less than or equal to mx:
def primes(mx):
# The helper function, next, has arity 0 for tail recursion optimization;
# it expects its input to be the array of previously found primes:
def next:
. as \$previous
| (\$previous | .[length-1]) as \$last
| if (\$last >= mx) then empty
else ((2 + \$last)
| until( relatively_prime(\$previous) ; . + 2)) as \$nextp
| if \$nextp <= mx
then \$nextp, (( \$previous + [\$nextp] ) | next)
else empty
end
end;
if mx <= 1 then empty
elif mx == 2 then 2
else (2, 3, ([2,3] | next))
end ;

# Return an array of the distinct prime factors of . in increasing order
def prime_factors:

# Return an array of prime factors of . given that "primes"
# is an array of relevant primes:
def pf(\$primes):
if . <= 1 then []
else . as \$in
| if (\$in | relatively_prime(\$primes)) then [\$in]
else reduce \$primes[] as \$p
([];
if (\$in % \$p) != 0 then .
else . + [\$p] +  ((\$in / \$p) | pf(\$primes))
end)
end
| unique
end;

if . <= 1 then []
else . as \$in
| pf( [ primes( (1+\$in) | sqrt | floor)  ] )
end;```

Mu

```def isSquareFree:
. as \$n
| 2
| until ( (. * . > \$n) or . == 0;
if (\$n % (.*.) == 0) then 0 # i.e. stop
elif . > 2 then . + 2
else . + 1
end  )
| . != 0;

def mu:
. as \$n
| if . < 1 then "Argument to mu must be a positive integer" | error
elif . == 1 then 1
else if isSquareFree
then if ((prime_factors|length) % 2 == 0) then 1
else -1
end
else 0
end
end;```

```def nwise(\$n):
def n: if length <= \$n then . else .[0:\$n] , (.[\$n:] | n) end;
n;

def pp: if . >=0 then " \(.)" else tostring end;
"The first 199 Möbius numbers are:",
(["  ", (range(1; 200) | mu | pp )]
| nwise(20)
| join(" ") ) ;

Output:

As above.

## Julia

```using Primes

# modified from reinermartin's PR at https://github.com/JuliaMath/Primes.jl/pull/70/files
function moebius(n::Integer)
@assert n > 0
m(p, e) = p == 0 ? 0 : e == 1 ? -1 : 0
reduce(*, m(p, e) for (p, e) in factor(n) if p ≥ 0; init=1)
end
μ(n) = moebius(n)

print("First 199 terms of the Möbius sequence:\n   ")
for n in 1:199
print(lpad(μ(n), 3), n % 20 == 19 ? "\n" : "")
end
```
Output:
```First 199 terms of the Möbius sequence:
1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1
0  1  1 -1  0  0  1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1
0 -1 -1 -1  0  0  1 -1  0  0  0  1  0 -1  0  1  0  1  1 -1
0 -1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0  0  1 -1 -1
0  0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0
0 -1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1
0  0  1  1  0  0  0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1
0  1  1  1  0  1  1  0  0 -1  0 -1  0  0 -1  1  0 -1  1  1
0  1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0  0  1  1 -1
0 -1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1
```

## Kotlin

Translation of: Java
```import kotlin.math.sqrt

fun main() {
println("First 199 terms of the möbius function are as follows:")
print("    ")
for (n in 1..199) {
print("%2d  ".format(mobiusFunction(n)))
if ((n + 1) % 20 == 0) {
println()
}
}
}

private const val MU_MAX = 1000000
private var MU: IntArray? = null

//  Compute mobius function via sieve
private fun mobiusFunction(n: Int): Int {
if (MU != null) {
return MU!![n]
}

//  Populate array
MU = IntArray(MU_MAX + 1)
val sqrt = sqrt(MU_MAX.toDouble()).toInt()
for (i in 0 until MU_MAX) {
MU!![i] = 1
}
for (i in 2..sqrt) {
if (MU!![i] == 1) {
//  for each factor found, swap + and -
for (j in i..MU_MAX step i) {
MU!![j] *= -i
}
//  square factor = 0
for (j in i * i..MU_MAX step i * i) {
MU!![j] = 0
}
}
}
for (i in 2..MU_MAX) {
when {
MU!![i] == i -> {
MU!![i] = 1
}
MU!![i] == -i -> {
MU!![i] = -1
}
MU!![i] < 0 -> {
MU!![i] = 1
}
MU!![i] > 0 -> {
MU!![i] = -1
}
}
}
return MU!![n]
}
```
Output:
```First 199 terms of the möbius function are as follows:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1  ```

## Lua

Translation of: C
```function buildArray(size, value)
local tbl = {}
for i=1, size do
table.insert(tbl, value)
end
return tbl
end

MU_MAX = 1000000
sqroot = math.sqrt(MU_MAX)
mu = buildArray(MU_MAX, 1)

for i=2, sqroot do
if mu[i] == 1 then
-- for each factor found, swap + and -
for j=i, MU_MAX, i do
mu[j] = mu[j] * -i
end
-- square factor = 0
for j=i*i, MU_MAX, i*i do
mu[j] = 0
end
end
end

for i=2, MU_MAX do
if mu[i] == i then
mu[i] = 1
elseif mu[i] == -i then
mu[i] = -1
elseif mu[i] < 0 then
mu[i] = 1
elseif mu[i] > 0 then
mu[i] = -1
end
end

print("First 199 terms of the mobius function are as follows:")
io.write("    ")
for i=1, 199 do
io.write(string.format("%2d  ", mu[i]))
if (i + 1) % 20 == 0 then
print()
end
end
```
Output:
```First 199 terms of the mobius function are as follows:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1```

## Mathematica/Wolfram Language

```Grid[Partition[MoebiusMu[Range[99]], UpTo[10]]]
```
Output:
```1	-1	-1	0	-1	1	-1	0	0	1
-1	0	-1	1	1	0	-1	0	-1	0
1	1	-1	0	0	1	0	0	-1	-1
-1	0	1	1	1	0	-1	1	1	0
-1	-1	-1	0	0	1	-1	0	0	0
1	0	-1	0	1	0	1	1	-1	0
-1	1	0	0	1	-1	-1	0	1	-1
-1	0	-1	1	0	0	1	-1	-1	0
0	1	-1	0	1	1	1	0	-1	0
1	0	1	1	1	0	-1	0	0	```

## Nim

Uses the prime decomposition method from https://rosettacode.org/wiki/Prime_decomposition#Nim

```import std/[math, sequtils, strformat]

func getStep(n: int): int {.inline.} =
result = 1 + n shl 2 - n shr 1 shl 1

func primeFac(n: int): seq[int] =
var
maxq = int(sqrt(float(n)))
d = 1
q: int = 2 + (n and 1)   # Start with 2 or 3 according to oddity.

while q <= maxq and n %% q != 0:
q = getStep(d)
inc d
if q <= maxq:
let q1 = primeFac(n /% q)
let q2 = primeFac(q)
result = concat(q2, q1, result)
else:

func squareFree(num: int): bool =
let fact = primeFac num

for i in fact:
if fact.count(i) > 1:
return false

return true

func mobius(num: int): int =
if num == 1: return num

let fact = primeFac num

for i in fact:
## check if it has a squared prime factor
if fact.count(i) == 2:
return 0

if num.squareFree:
if fact.len mod 2 == 0:
return 1
else:
return -1

when isMainModule:
echo "The first 199 möbius numbers are:"

for i in 1..199:
stdout.write fmt"{mobius(i):4}"
if i mod 20 == 0:
echo "" # print newline
```
Output:
```The first 199 möbius numbers are:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1   0
1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1   0
-1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1   0
-1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1   0
0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0   0
-1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1   0
0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1   0
1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1   0
1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1   0
-1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1   0```

## Pascal

``` See Mertens_function#Pascal
```

## Perl

```use utf8;
use strict;
use warnings;
use feature 'say';
use List::Util 'uniq';

sub prime_factors {
my (\$n, \$d, @factors) = (shift, 1);
while (\$n > 1 and \$d++) {
\$n /= \$d, push @factors, \$d until \$n % \$d;
}
@factors
}

sub μ {
my @p = prime_factors(shift);
@p == uniq(@p) ? 0 == @p%2 ? 1 : -1 : 0;
}

my @möebius;
push @möebius, μ(\$_) for 1 .. (my \$upto = 199);

say "Möbius sequence - First \$upto terms:\n" .
(' 'x4 . sprintf "@{['%4d' x \$upto]}", @möebius) =~ s/((.){80})/\$1\n/gr;
```
Output:
```Möbius sequence - First 199 terms:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1```

## Phix

```with javascript_semantics
function Moebius(integer n)
if n=1 then return 1 end if
sequence f = prime_factors(n,true)
for i=2 to length(f) do
if f[i] = f[i-1] then return 0 end if
end for
return iff(odd(length(f))?-1:+1)
end function

sequence s = {"  ."}
for i=1 to 199 do s = append(s,sprintf("%3d",Moebius(i))) end for
puts(1,join_by(s,1,20," "))
```
Output:
```  .   1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1
```

## Python

Everything verbatim from: https://www.geeksforgeeks.org/program-mobius-function/

All code by: Manish Shaw

Method 1

We iterate through all numbers i smaller than or equal to N. For every number we check if it divides N. If yes, we check if it’s also prime. If both conditions are satisfied, we check if its square also divides N. If yes, we return 0. If the square doesn’t divide, we increment count of prime factors. Finally, we return 1 if there are an even number of prime factors and return -1 if there are odd number of prime factors.

```# Python Program to evaluate
# Mobius def M(N) = 1 if N = 1
# M(N) = 0 if any prime factor
# of N is contained twice
# M(N) = (-1)^(no of distinct
# prime factors)
# Python Program to
# evaluate Mobius def
# M(N) = 1 if N = 1
# M(N) = 0 if any
# prime factor of
# N is contained twice
# M(N) = (-1)^(no of
# distinct prime factors)

# def to check if
# n is prime or not
def isPrime(n) :

if (n < 2) :
return False
for i in range(2, n + 1) :
if (i * i <= n and n % i == 0) :
return False
return True

def mobius(N) :

# Base Case
if (N == 1) :
return 1

# For a prime factor i
# check if i^2 is also
# a factor.
p = 0
for i in range(1, N + 1) :
if (N % i == 0 and
isPrime(i)) :

# Check if N is
# divisible by i^2
if (N % (i * i) == 0) :
return 0
else :

# i occurs only once,
# increase f
p = p + 1

# All prime factors are
# contained only once
# Return 1 if p is even
# else -1
if(p % 2 != 0) :
return -1
else :
return 1

# Driver Code
print("Mobius numbers from 1..99:")

for i in range(1, 100):
print(f"{mobius(i):>4}", end = '')

if i % 20 == 0: print()
# This code is contributed by
# Manish Shaw(manishshaw1)
```
Output:
```Mobius numbers from 1..99:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1   0
1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1   0
-1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1   0
-1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1   0
0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0```

Method 2 (Efficient)

The idea is based on efficient program to print all prime factors of a given number. The interesting thing is, we do not need inner while loop here because if a number divides more than once, we can immediately return 0.

```# Python Program to evaluate
# Mobius def M(N) = 1 if N = 1
# M(N) = 0 if any prime factor
# of N is contained twice
# M(N) = (-1)^(no of distinct
# prime factors)
import math

# def to check if n
# is prime or not
def isPrime(n) :

if (n < 2) :
return False
for i in range(2, n + 1) :
if (n % i == 0) :
return False
i = i * i
return True

def mobius(n) :

p = 0

# Handling 2 separately
if (n % 2 == 0) :

n = int(n / 2)
p = p + 1

# If 2^2 also
# divides N
if (n % 2 == 0) :
return 0

# Check for all
# other prime factors
for i in range(3, int(math.sqrt(n)) + 1) :

# If i divides n
if (n % i == 0) :

n = int(n / i)
p = p + 1

# If i^2 also
# divides N
if (n % i == 0) :
return 0
i = i + 2

if(p % 2 == 0) :
return -1
else :
return 1

# Driver Code
print("Mobius numbers from 1..99:")

for i in range(1, 100):
print(f"{mobius(i):>4}", end = '')
# This code is contributed by
# Manish Shaw(manishshaw1)
```
Output:
```Mobius numbers from 1..99:
-1   1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1   0
1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1   0
-1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1   0
-1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1   0
0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0```

## Raku

(formerly Perl 6)

Works with: Rakudo version 2019.11

Möbius number is not defined for n == 0. Raku arrays are indexed from 0 so store a blank value at position zero to keep n and μ(n) aligned.

```use Prime::Factor;

sub μ (Int \n) {
return 0 if n %% 4 or n %% 9 or n %% 25 or n %% 49 or n %% 121;
my @p = prime-factors(n);
+@p == +@p.unique ?? +@p %% 2 ?? 1 !! -1 !! 0
}

my @möbius = lazy flat '', 1, (2..*).hyper.map: -> \n { μ(n) };

put "Möbius sequence - First 199 terms:\n",
@möbius[^200]».fmt('%3s').batch(20).join: "\n";
```
Output:
```Möbius sequence - First 199 terms:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1```

## REXX

Note that the   Möbius   function is also spelled   Mobius   and/or   Moebius,   and it is also known as the   mu   function,   where   mu   is the Greek symbol   μ.

Programming note:   This REXX version supports the specifying of the low and high values to be generated,
as well as the group size for the grid   (it can be specified as   1   which will show a vertical list).

A null value will be shown as a bullet (•) when showing the Möbius value of for zero   (this can be changed in the 2nd line of the   mobius   function).

The above "feature" was added to make the grid to be aligned with other solutions.

The function to computer some prime numbers is a bit of an overkill, but the goal was to keep it general  (in case of larger/higher ranges for a Möbius sequence).

```/*REXX pgm computes & shows a value grid of the Möbius function for a range of integers.*/
parse arg LO HI grp .                            /*obtain optional arguments from the CL*/
if  LO=='' |  LO==","  then  LO=   0             /*Not specified?  Then use the default.*/
if  HI=='' |  HI==","  then  HI= 199             /* "      "         "   "   "     "    */
if grp=='' | grp==","  then grp=  20             /* "      "         "   "   "     "    */
/*                            ______   */
call genP HI                                     /*generate primes up to the  √  HI     */
say center(' The Möbius sequence from ' LO " ──► " HI" ", max(50, grp*3), '═')   /*title*/
\$=                                               /*variable holds output grid of GRP #s.*/
do j=LO  to  HI;  \$= \$  right( mobius(j), 2) /*process some numbers from  LO ──► HI.*/
if words(\$)==grp  then do;  say substr(\$, 2);  \$=    /*show grid if fully populated,*/
end                           /*  and nullify it for more #s.*/
end   /*j*/                                  /*for small grids, using wordCnt is OK.*/

if \$\==''  then say substr(\$, 2)                 /*handle any residual numbers not shown*/
exit                                             /*stick a fork in it,  we're all done. */
/*──────────────────────────────────────────────────────────────────────────────────────*/
mobius: procedure expose @.;  parse arg x        /*obtain a integer to be tested for mu.*/
if x<1  then return '∙'                  /*special? Then return symbol for null.*/
do k=1;  p= @.k                     /*get the  Kth  (pre─generated)  prime.*/
if p>x  then leave                  /*prime (P)   > X?    Then we're done. */
if p*p>x  then do;   #= #+1;  leave /*prime (P**2 > X?    Bump # and leave.*/
end
if x//p==0  then do; #= #+1         /*X divisible by P?   Bump mu number.  */
x= x % p       /*                    Divide by prime. */
if x//p==0  then return 0  /*X÷by P?  Then return zero*/
end
end   /*k*/                         /*#  (below) is almost always small, <9*/
if #//2==0  then return  1               /*Is # even?   Then return postive  1  */
return -1               /* " "  odd?     "     "   negative 1. */
/*──────────────────────────────────────────────────────────────────────────────────────*/
genP: @.1=2; @.2=3; @.3=5; @.4=7; @.5=11; @.6= 13;  nP=6  /*assign low primes; # primes.*/
do lim=nP  until lim*lim>=HI /*only keep primes up to the  sqrt(HI).*/
end   /*lim*/
do j=@.nP+4  by 2  to HI                  /*only find odd primes from here on.   */
parse var j '' -1 _;if _==5  then iterate /*Is last digit a "5"?   Then not prime*/
if j// 3==0  then iterate                 /*is J divisible by  3?    "   "    "  */
if j// 7==0  then iterate                 /* " "     "      "  7?    "   "    "  */
if j//11==0  then iterate                 /* " "     "      " 11?    "   "    "  */
if j//13==0  then iterate                 /* " "     "      " 13?    "   "    "  */
do k=7  while k*k<=j            /*divide by some generated odd primes. */
if j // @.k==0  then iterate j  /*Is J divisible by  P?  Then not prime*/
end   /*k*/                     /* [↓]  a prime  (J)  has been found.  */
nP= nP+1;    if nP<=HI  then @.nP= j      /*bump prime count; assign prime to  @.*/
end      /*j*/;              return
```
output   when using the default inputs:

Output note:   note the use of a bullet (•) to signify that a "null" is being shown (for the 0th entry).

```══════════ The Möbius sequence from  0  ──►  199 ═══════════
∙  1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1
0  1  1 -1  0  0  1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1
0 -1 -1 -1  0  0  1 -1  0  0  0  1  0 -1  0  1  0  1  1 -1
0 -1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0  0  1 -1 -1
0  0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0
0 -1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1
0  0  1  1  0  0  0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1
0  1  1  1  0  1  1  0  0 -1  0 -1  0  0 -1  1  0 -1  1  1
0  1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0  0  1  1 -1
0 -1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1
```

## Ring

Translation of: FreeBASIC
```mobStr = "      . "

for i = 1 to 200
if mobius(i) >= 0
mobStr + = " "
ok
temp = string(mobius(i))
if left(temp,2) = "-0"
temp = right(temp,len(temp)-1)
ok
mobStr += temp + " "
if i % 10 = 9
see mobStr + nl
mobStr = "     "
ok
next

func mobius(n)
if n = 1
return 1
ok
for d = 2 to ceil(sqrt(n))
if n % d = 0
if n % (d*d) = 0
return 0
ok
return -mobius(n/d)
ok
next
return -1```

Output:

```      .  1 -1 -1  0 -1  1 -1  0  0
1 -1  0 -1  1  1  0 -1  0 -1
0  1  1 -1  0  0  1  0  0 -1
-1 -1  0  1  1  1  0 -1  1  1
0 -1 -1 -1  0  0  1 -1  0  0
0  1  0 -1  0  1  0  1  1 -1
0 -1  1  0  0  1 -1 -1  0  1
-1 -1  0 -1  1  0  0  1 -1 -1
0  0  1 -1  0  1  1  1  0 -1
0  1  0  1  1  1  0 -1  0  0
0 -1 -1 -1  0 -1  1 -1  0 -1
-1  1  0 -1 -1  1  0  0  1  1
0  0  1  1  0  0  0 -1  0  1
-1 -1  0  1  1  0  0 -1 -1 -1
0  1  1  1  0  1  1  0  0 -1
0 -1  0  0 -1  1  0 -1  1  1
0  1  0 -1  0 -1  1 -1  0  0
-1  0  0 -1 -1  0  0  1  1 -1
0 -1 -1  1  0  1 -1  1  0  0
-1 -1  0 -1  1 -1  0 -1  0 -1
```

## Ruby

```require 'prime'

def μ(n)
pd = n.prime_division
return 0 unless pd.map(&:last).all?(1)
pd.size.even? ? 1 : -1
end

(["  "] + (1..199).map{|n|"%2s" % μ(n)}).each_slice(20){|line| puts line.join(" ") }
```
Output:
```    1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1
0  1  1 -1  0  0  1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1
0 -1 -1 -1  0  0  1 -1  0  0  0  1  0 -1  0  1  0  1  1 -1
0 -1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0  0  1 -1 -1
0  0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0
0 -1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1
0  0  1  1  0  0  0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1
0  1  1  1  0  1  1  0  0 -1  0 -1  0  0 -1  1  0 -1  1  1
0  1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0  0  1  1 -1
0 -1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1
```

## Sidef

Built-in:

```say moebius(53)    #=> -1
say moebius(54)    #=> 0
say moebius(55)    #=> 1
```

Simple implementation:

```func μ(n) {
var f = n.factor_exp.map { .tail }
f.any { _ > 1 } ? 0 : ((-1)**f.sum)
}

with (199) { |n|
say "Values of the Möbius function for numbers in the range 1..#{n}:"
[' '] + (1..n->map(μ)) -> each_slice(20, {|*line|
say line.map { '%2s' % _ }.join(' ')
})
}
```
Output:
```Values of the Möbius function for numbers in the range 1..199:
1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1
0  1  1 -1  0  0  1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1
0 -1 -1 -1  0  0  1 -1  0  0  0  1  0 -1  0  1  0  1  1 -1
0 -1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0  0  1 -1 -1
0  0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0
0 -1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1
0  0  1  1  0  0  0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1
0  1  1  1  0  1  1  0  0 -1  0 -1  0  0 -1  1  0 -1  1  1
0  1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0  0  1  1 -1
0 -1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1
```

## Tiny BASIC

Tiny BASIC is not suited for printing tables, so this is limited to prompting for a single number and calculating its Mobius number.

```    PRINT "Enter an integer"
INPUT N
IF N < 0 THEN LET N = -N
IF N < 2 THEN GOTO 100 + N
LET C = 1
LET F = 2
10 IF ((N/F)/F)*F*F = N THEN GOTO 100
IF (N/F)*F = N THEN GOTO 30
20 LET F = F + 1
IF F<=N THEN GOTO 10
GOTO 100 + C
30 LET N = N / F
LET C = -C
GOTO 20
99 PRINT "-1"
END
100 PRINT "0"
END
101 PRINT "1"
END```

## Wren

Library: Wren-fmt
Library: Wren-math
```import "/fmt" for Fmt
import "/math" for Int

var isSquareFree = Fn.new { |n|
var i = 2
while (i * i <= n) {
if (n%(i*i) == 0) return false
i = (i > 2) ? i + 2 : i + 1
}
return true
}

var mu = Fn.new { |n|
if (n < 1) Fiber.abort("Argument must be a positive integer")
if (n == 1) return 1
var sqFree = isSquareFree.call(n)
var factors = Int.primeFactors(n)
if (sqFree && factors.count % 2 == 0) return 1
if (sqFree) return -1
return 0
}

System.print("The first 199 Möbius numbers are:")
for (i in 0..9) {
for (j in 0..19) {
if (i == 0 && j == 0) {
System.write("    ")
} else {
System.write("%(Fmt.dm(3, mu.call(i*20 + j))) ")
}
}
System.print()
}
```
Output:
```The first 199 Möbius numbers are:
1  -1  -1   0  -1   1  -1   0   0   1  -1   0  -1   1   1   0  -1   0  -1
0   1   1  -1   0   0   1   0   0  -1  -1  -1   0   1   1   1   0  -1   1   1
0  -1  -1  -1   0   0   1  -1   0   0   0   1   0  -1   0   1   0   1   1  -1
0  -1   1   0   0   1  -1  -1   0   1  -1  -1   0  -1   1   0   0   1  -1  -1
0   0   1  -1   0   1   1   1   0  -1   0   1   0   1   1   1   0  -1   0   0
0  -1  -1  -1   0  -1   1  -1   0  -1  -1   1   0  -1  -1   1   0   0   1   1
0   0   1   1   0   0   0  -1   0   1  -1  -1   0   1   1   0   0  -1  -1  -1
0   1   1   1   0   1   1   0   0  -1   0  -1   0   0  -1   1   0  -1   1   1
0   1   0  -1   0  -1   1  -1   0   0  -1   0   0  -1  -1   0   0   1   1  -1
0  -1  -1   1   0   1  -1   1   0   0  -1  -1   0  -1   1  -1   0  -1   0  -1
```

## XPL0

```func Mobius(N);
int  N, Cnt, F, K;
[Cnt:= 0;
F:= 2;  K:= 0;
repeat  if rem(N/F) = 0 then
[Cnt:= Cnt+1;
N:= N/F;
K:= K+1;
if K >= 2 then return 0;
]
else    [F:= F+1;  K:= 0];
until   F > N;
return if Cnt&1 then -1 else 1;
];

int  N;
[Format(3, 0);
Text(0, "   ");
for N:= 1 to 199 do
[RlOut(0, float(Mobius(N)));
if rem(N/20) = 19 then CrLf(0);
];
]```
Output:
```     1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1
0  1  1 -1  0  0  1  0  0 -1 -1 -1  0  1  1  1  0 -1  1  1
0 -1 -1 -1  0  0  1 -1  0  0  0  1  0 -1  0  1  0  1  1 -1
0 -1  1  0  0  1 -1 -1  0  1 -1 -1  0 -1  1  0  0  1 -1 -1
0  0  1 -1  0  1  1  1  0 -1  0  1  0  1  1  1  0 -1  0  0
0 -1 -1 -1  0 -1  1 -1  0 -1 -1  1  0 -1 -1  1  0  0  1  1
0  0  1  1  0  0  0 -1  0  1 -1 -1  0  1  1  0  0 -1 -1 -1
0  1  1  1  0  1  1  0  0 -1  0 -1  0  0 -1  1  0 -1  1  1
0  1  0 -1  0 -1  1 -1  0  0 -1  0  0 -1 -1  0  0  1  1 -1
0 -1 -1  1  0  1 -1  1  0  0 -1 -1  0 -1  1 -1  0 -1  0 -1
```

## Yabasic

Translation of: FreeBASIC
```outstr\$ = " .  "
for i = 1 to 200
if mobius(i) >= 0 then outstr\$ = outstr\$ + " " : fi
outstr\$ = outstr\$ + str\$(mobius(i)) + "  "
if mod(i, 10) = 9 then
print outstr\$
outstr\$ = ""
end if
next i
end

sub mobius(n)
if n = 1 then return 1 : fi
for d = 2 to int(sqr(n))
if mod(n, d) = 0 then
if mod(n, (d*d)) = 0 then return 0 : fi
return -mobius(n/d)
end if
next d
return -1
end sub```

## zkl

```fcn mobius(n){
pf:=primeFactors(n);
sq:=pf.filter1('wrap(f){ (n % (f*f))==0 });  // False if square free
if(sq==False){ if(pf.len().isEven) 1 else -1 }
else 0
}
fcn primeFactors(n){  // Return a list of prime factors of n
acc:=fcn(n,k,acc,maxD){  // k is 2,3,5,7,9,... not optimum
if(n==1 or k>maxD) acc.close();
else{
q,r:=n.divr(k);   // divr-->(quotient,remainder)
if(r==0) return(self.fcn(q,k,acc.write(k),q.toFloat().sqrt()));
return(self.fcn(n,k+1+k.isOdd,acc,maxD))  # both are tail recursion
}
}(n,2,Sink(List),n.toFloat().sqrt());
m:=acc.reduce('*,1);      // mulitply factors
if(n!=m) acc.append(n/m); // opps, missed last factor
else acc;
}```
```[1..199].apply(mobius)
```  1 -1 -1  0 -1  1 -1  0  0  1 -1  0 -1  1  1  0 -1  0 -1  0